|
2025-04-12 11:03:10.590 [Thd =55] Info Default ratio:;objId:0
|
|
2025-04-12 11:03:10.599 [Thd =55] Info Default ratio:;objId:0
|
|
2025-04-12 11:03:10.599 [Thd =55] Info Default ratio:;objId:0
|
|
2025-04-12 11:03:10.599 [Thd =55] Info Default lens from system settings:
|
|
2025-04-12 11:03:10.599 [Thd =55] Info Default systemlensettings lens count:3
|
|
2025-04-12 11:03:10.600 [Thd =55] Info Default ratio:P200;objId:0
|
|
2025-04-12 11:03:10.600 [Thd =55] Info Default ratio:P140;objId:1
|
|
2025-04-12 11:03:10.600 [Thd =55] Info Default ratio:P100;objId:2
|
|
2025-04-12 11:03:10.608 [Thd =1] Info Default CurrentMenthod: ClassName:Module.Setups_Storm.Views.UCSetupMainMethodName:SelectProductSetup After Memory usage: 775.8164MB
|
|
2025-04-12 11:03:10.636 [Thd =53] Info Default PolarizationBaffleControl True: 3!
|
|
2025-04-12 11:03:11.342 [Thd =49] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:03:12.049 [Thd =1] Info Default CaptureCmd,CanExec:True
|
|
2025-04-12 11:03:16.287 [Thd =54] Error Default ChangeLightPath: : Switch to area cam fault return:1!
|
|
2025-04-12 11:03:16.287 [Thd =54] Info Default ChangeLightPath: False!
|
|
2025-04-12 11:03:20.115 [Thd =48] Info Default not in position 1, PLCReturnIndex:0, TrySwitchIndex:1
|
|
2025-04-12 11:03:20.115 [Thd =48] Info Default send switch cmd
|
|
2025-04-12 11:03:25.751 [Thd =55] Info Default not in position 1, PLCReturnIndex:0, TrySwitchIndex:1
|
|
2025-04-12 11:03:25.751 [Thd =55] Info Default send switch cmd
|
|
2025-04-12 11:03:27.239 [Thd =45] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:03:30.244 [Thd =38] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:03:35.031 [Thd =50] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:03:35.267 [Thd =48] Info Default not in position 2, PLCReturnIndex:0, TrySwitchIndex:1
|
|
2025-04-12 11:03:35.268 [Thd =48] Info AbstractMicroscope Switch Lens:Broadcast Event
|
|
2025-04-12 11:03:35.299 [Thd =48] Info AbstractMicroscope Broadcast Event Finished
|
|
2025-04-12 11:03:40.850 [Thd =55] Info Default not in position 2, PLCReturnIndex:0, TrySwitchIndex:1
|
|
2025-04-12 11:03:40.850 [Thd =55] Info AbstractMicroscope Switch Lens:Broadcast Event
|
|
2025-04-12 11:03:40.878 [Thd =55] Info AbstractMicroscope Broadcast Event Finished
|
|
2025-04-12 11:04:17.520 [Thd =50] Info Default PolarizationBaffleControl False: 2!
|
|
2025-04-12 11:04:17.521 [Thd =50] Info Default PolarizationBaffle Off
|
|
2025-04-12 11:04:24.373 [Thd =1] Info Default CloseLamp Transmission
|
|
2025-04-12 11:04:25.181 [Thd =54] Info Default PolarizationBaffleControl False: 2!
|
|
2025-04-12 11:04:29.165 [Thd =1] Info Default OpenLamp Transmission
|
|
2025-04-12 11:04:29.599 [Thd =53] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:04:29.972 [Thd =51] Info Default PolarizationBaffleControl True: 3!
|
|
2025-04-12 11:04:36.381 [Thd =53] Info Default PolarizationBaffleControl False: 2!
|
|
2025-04-12 11:04:36.381 [Thd =53] Info Default PolarizationBaffle Off
|
|
2025-04-12 11:04:41.969 [Thd =54] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:05:28.188 [Thd =55] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:05:32.102 [Thd =20] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:09:29.824 [Thd =1] Info MMSFocus _isStop = true
|
|
2025-04-12 11:12:37.270 [Thd =1] Info MMSFocus _isStop = true
|
|
2025-04-12 11:14:53.278 [Thd =1] Info MMSFocus _isStop = true
|
|
2025-04-12 11:15:56.373 [Thd =1] Info MMSFocus _isStop = true
|
|
2025-04-12 11:19:04.293 [Thd =1] Info MMSFocus _isStop = true
|
|
2025-04-12 11:22:09.317 [Thd =1] Info Default CurrentMenthod: ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage: 752.9492MB
|
|
2025-04-12 11:22:10.058 [Thd =20] Info Default 设置光标定环境中，请等待......
|
|
2025-04-12 11:22:10.081 [Thd =20] Info Default AutoLightInit******************DemarcatePoints Count:1
|
|
2025-04-12 11:22:10.085 [Thd =20] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
|
2025-04-12 11:22:10.086 [Thd =20] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
|
2025-04-12 11:22:10.095 [Thd =20] Info Default SetDistortionPara disaabled
|
|
2025-04-12 11:22:10.096 [Thd =20] Info Default aSwitchIndex index:1
|
|
2025-04-12 11:22:10.096 [Thd =20] Info Default lens from ATF:
|
|
2025-04-12 11:22:10.096 [Thd =20] Info Default objCount:3
|
|
2025-04-12 11:22:10.096 [Thd =20] Info Default ratio:P200;objId:0
|
|
2025-04-12 11:22:10.097 [Thd =20] Info Default ratio:P140;objId:1
|
|
2025-04-12 11:22:10.097 [Thd =20] Info Default ratio:P100;objId:2
|
|
2025-04-12 11:22:10.097 [Thd =20] Info Default ratio:;objId:0
|
|
2025-04-12 11:22:10.097 [Thd =20] Info Default ratio:;objId:0
|
|
2025-04-12 11:22:10.097 [Thd =20] Info Default ratio:;objId:0
|
|
2025-04-12 11:22:10.097 [Thd =20] Info Default ratio:;objId:0
|
|
2025-04-12 11:22:10.098 [Thd =20] Info Default ratio:;objId:0
|
|
2025-04-12 11:22:10.098 [Thd =20] Info Default lens from system settings:
|
|
2025-04-12 11:22:10.098 [Thd =20] Info Default systemlensettings lens count:3
|
|
2025-04-12 11:22:10.098 [Thd =20] Info Default ratio:P200;objId:0
|
|
2025-04-12 11:22:10.098 [Thd =20] Info Default ratio:P140;objId:1
|
|
2025-04-12 11:22:10.099 [Thd =20] Info Default ratio:P100;objId:2
|
|
2025-04-12 11:22:25.194 [Thd =20] Info Default not in position 1, PLCReturnIndex:0, TrySwitchIndex:1
|
|
2025-04-12 11:22:25.194 [Thd =20] Info Default send switch cmd
|
|
2025-04-12 11:22:40.292 [Thd =20] Info Default not in position 2, PLCReturnIndex:0, TrySwitchIndex:1
|
|
2025-04-12 11:22:40.292 [Thd =20] Info AbstractMicroscope Switch Lens:Broadcast Event
|
|
2025-04-12 11:22:40.320 [Thd =20] Info AbstractMicroscope Broadcast Event Finished
|
|
2025-04-12 11:22:40.324 [Thd =20] Error Default BaseScanObject:no linear camera device or camera is error.
|
|
2025-04-12 11:22:40.327 [Thd =20] Info Default StagePixelSizeY:0,PrepareDistanceScan:0,StepScan:0,StepStep:0,CosValueY:0,SinValueY:0
|
|
2025-04-12 11:22:40.330 [Thd =20] Info strip vectorBegin:(13.907871,3.455955),VectorEnd:(13.907871,3.455955),CaptureBegin:(13.907871,3.455955)，CaptureEnd：(13.907871,3.455955),StepScan:0
|
|
2025-04-12 11:22:40.330 [Thd =20] Info Default VectorBegin:(13.907871485789,3.45595469265495)
|
|
2025-04-12 11:22:41.156 [Thd =52] Info Default 打开光源，亮度：44%
|
|
2025-04-12 11:22:41.157 [Thd =52] Info Default OpenLamp Transmission
|
|
2025-04-12 11:22:41.460 [Thd =20] Info Default SetFocusTrack CloseTrack OK
|
|
2025-04-12 11:22:41.460 [Thd =20] Info Default 聚焦Track已关闭
|
|
2025-04-12 11:22:41.968 [Thd =38] Info Default PolarizationBaffleControl True: 3!
|
|
2025-04-12 11:22:42.170 [Thd =52] Info Default CloseLamp Reflection
|
|
2025-04-12 11:22:42.657 [Thd =20] Info MMSFocus _isStop = true
|
|
2025-04-12 11:22:42.686 [Thd =51] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:22:43.866 [Thd =20] Info Default QuerySubstrateMode Line OK
|
|
2025-04-12 11:22:43.866 [Thd =20] Info Default 已切换到线阵聚焦模式
|
|
2025-04-12 11:22:43.986 [Thd =52] Info Default PolarizationBaffleControl False: 2!
|
|
2025-04-12 11:22:45.170 [Thd =20] Info Default SetFocusTrack OpenTrack OK
|
|
2025-04-12 11:22:45.170 [Thd =20] Info Default 聚焦Track已开启
|
|
2025-04-12 11:22:53.207 [Thd =54] Error Default ChangeLightPath: : Switch to area cam fault return:0!
|
|
2025-04-12 11:22:53.207 [Thd =54] Info Default ChangeLightPath: False!
|
|
2025-04-12 11:22:53.208 [Thd =20] Info Default 标定中，请等待......
|
|
2025-04-12 11:22:53.214 [Thd =49] Info Default CurrentSize:1,1
|
|
2025-04-12 11:22:53.215 [Thd =49] Error Update LineCameraOption System.NullReferenceException: 未将对象引用设置到对象的实例。
|
|
在 Plugins.Camera.Euresys.ProductModel.IKAP.Update(LineCameraOption lineCameraOption)
|
|
2025-04-12 11:22:53.272 [Thd =20] Error Default WindLightCorrention Execute Error！ System.AggregateException: 发生一个或多个错误。 ---> System.Exception: update param fail 3:未将对象引用设置到对象的实例。
|
|
在 Plugins.Camera.Euresys.ProductModel.IKAP.Update(LineCameraOption lineCameraOption)
|
|
在 Plugins.Camera.Euresys.TDICXP4K7C.Update(LineCameraOption lineCameraOption)
|
|
在 Storm.Command.Common.LineCameraSetting.<>c__DisplayClass13_0.<.ctor>b__0()
|
|
在 System.Threading.Tasks.Task.Execute()
|
|
--- 内部异常堆栈跟踪的结尾 ---
|
|
在 System.Threading.Tasks.Task.WaitAll(Task[] tasks, Int32 millisecondsTimeout, CancellationToken cancellationToken)
|
|
在 System.Threading.Tasks.Task.WaitAll(Task[] tasks, Int32 millisecondsTimeout)
|
|
在 System.Threading.Tasks.Task.WaitAll(Task[] tasks)
|
|
在 Storm.Command.Common.LineCameraSetting..ctor(CameraSetting cameraSetting)
|
|
在 Module.Setups_Storm.LightCalibration.DBCalibration.OpticalCalibrationScan() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.3_Build\Modules\Module.Setups_Storm\SettingStep\LightCalibration\DBCalibration.cs:行号 32
|
|
在 Module.Setups_Storm.LightCalibration.DBCalibration.Calibration() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.3_Build\Modules\Module.Setups_Storm\SettingStep\LightCalibration\DBCalibration.cs:行号 21
|
|
在 Module.Setups_Storm.SettingStep.WindLightCorrention.<btnExecute_Click>b__26_0() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.3_Build\Modules\Module.Setups_Storm\SettingStep\LightCalibration\WindLightCorrention.xaml.cs:行号 162
|
|
---> (内部异常 #0) System.Exception: update param fail 3:未将对象引用设置到对象的实例。
|
|
在 Plugins.Camera.Euresys.ProductModel.IKAP.Update(LineCameraOption lineCameraOption)
|
|
在 Plugins.Camera.Euresys.TDICXP4K7C.Update(LineCameraOption lineCameraOption)
|
|
在 Storm.Command.Common.LineCameraSetting.<>c__DisplayClass13_0.<.ctor>b__0()
|
|
在 System.Threading.Tasks.Task.Execute()<---
|
|
|
|
2025-04-12 11:22:53.274 [Thd =52] Info Default OpenLamp Transmission
|
|
2025-04-12 11:22:53.274 [Thd =1] Info Default 光标定完成！
|
|
2025-04-12 11:22:53.874 [Thd =54] Info MMSFocus _isStop = true
|
|
2025-04-12 11:22:54.086 [Thd =20] Info Default PolarizationBaffleControl True: 3!
|
|
2025-04-12 11:22:55.093 [Thd =52] Info Default PolarizationBaffleControl True: 3!
|
|
2025-04-12 11:22:55.093 [Thd =52] Info Default CloseLamp Reflection
|
|
2025-04-12 11:22:55.962 [Thd =54] Info Default QuerySubstrateMode Area OK
|
|
2025-04-12 11:22:55.963 [Thd =54] Info Default 已切换到面阵聚焦模式
|
|
2025-04-12 11:22:56.276 [Thd =54] Info Default SetFocusTrack CloseTrack OK
|
|
2025-04-12 11:22:56.276 [Thd =54] Info Default 聚焦Track已关闭
|
|
2025-04-12 11:22:57.622 [Thd =43] Error Default SyncSend recv cmd timeout
|
|
2025-04-12 11:23:05.322 [Thd =44] Error Default ChangeLightPath: : Switch to area cam fault return:1!
|
|
2025-04-12 11:23:05.333 [Thd =53] Info Default CurrentMenthod: ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__26_1 After Memory usage: 753.6602MB
|
|
2025-04-12 11:23:08.699 [Thd =1] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
|
2025-04-12 11:23:08.700 [Thd =1] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
|
2025-04-12 11:23:13.867 [Thd =1] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
|
2025-04-12 11:23:13.867 [Thd =1] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
|
2025-04-12 11:23:34.083 [Thd =1] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
|
2025-04-12 11:23:34.083 [Thd =1] Info DirPath D:\StormData\Work\data\Setups\0410\rcp_DB_1\OpticalCalibration
|
