2025-09-13 09:45:07.163 [Thd =20]  Info Default ***row:48, vectorBeginX:14.663, vectorBeginY:17.001, captureBeginX:11.098, captureBeginY:17.001, captureEndX:-12.399, captureEndY:17.001, vectorEndX:-16.356, vectorEndY:17.001
2025-09-13 09:45:07.168 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:07.170 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975234300409,EndPoint:12.3993509426695
2025-09-13 09:45:08.369 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:48
2025-09-13 09:45:08.370 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:08.370 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:08.372 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:48
2025-09-13 09:45:08.372 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:08.372 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:B_SourceLightType
2025-09-13 09:45:08.372 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:A_SourceLightType
2025-09-13 09:45:08.372 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,B_SourceLightType
2025-09-13 09:45:08.372 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,A_SourceLightType
2025-09-13 09:45:08.441 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:08.443 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_48_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:08.503 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:08.505 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_48_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:08.635 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;48/209,
2025-09-13 09:45:08.644 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:08.687 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:08.996 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:08
2025-09-13 09:45:09.035 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 49
2025-09-13 09:45:09.035 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 49
2025-09-13 09:45:09.035 [Thd =66]  Info Default  开始扫描条带； [49/209]
2025-09-13 09:45:09.038 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:09.039 [Thd =20]  Info Default ***row:49, vectorBeginX:-16.356, vectorBeginY:16.573, captureBeginX:-12.736, captureBeginY:16.573, captureEndX:10.761, captureEndY:16.573, vectorEndX:14.663, vectorEndY:16.573
2025-09-13 09:45:09.039 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:09.041 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:09
2025-09-13 09:45:09.041 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361620685595,EndPoint:-10.7607123041509
2025-09-13 09:45:10.245 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:49
2025-09-13 09:45:10.245 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:10.245 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:10.245 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:49
2025-09-13 09:45:10.246 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:10.246 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:B_SourceLightType
2025-09-13 09:45:10.246 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:A_SourceLightType
2025-09-13 09:45:10.246 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,B_SourceLightType
2025-09-13 09:45:10.246 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,A_SourceLightType
2025-09-13 09:45:10.294 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:10.296 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_49_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:10.344 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:10.346 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_49_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:10.509 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;49/209,
2025-09-13 09:45:10.520 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:10.704 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:11.051 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:11
2025-09-13 09:45:11.054 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 50
2025-09-13 09:45:11.054 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 50
2025-09-13 09:45:11.054 [Thd =54]  Info Default  开始扫描条带； [50/209]
2025-09-13 09:45:11.056 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:11.059 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:16.14557, CaptureEndX:-12.39935, CaptureEndY:16.14557, VectorBeginX:14.66320, VectorBeginY:16.14557, VectorEndX:-16.35592, VectorEndY:16.14557, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:11.059 [Thd =20]  Info Default ***row:50, vectorBeginX:14.663, vectorBeginY:16.146, captureBeginX:11.098, captureBeginY:16.146, captureEndX:-12.399, captureEndY:16.146, vectorEndX:-16.356, vectorEndY:16.146
2025-09-13 09:45:11.059 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:11.060 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975212327715,EndPoint:12.3993531399389
2025-09-13 09:45:11.097 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:11
2025-09-13 09:45:11.351 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:11
2025-09-13 09:45:11.394 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:11
2025-09-13 09:45:12.261 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:50
2025-09-13 09:45:12.262 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:12.262 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:12.262 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:50
2025-09-13 09:45:12.262 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:12.262 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:A_SourceLightType
2025-09-13 09:45:12.262 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:B_SourceLightType
2025-09-13 09:45:12.262 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,A_SourceLightType
2025-09-13 09:45:12.263 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,B_SourceLightType
2025-09-13 09:45:12.309 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:12.311 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_50_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:12.361 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:12.363 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_50_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:12.524 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;50/209,
2025-09-13 09:45:12.539 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:12.668 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:13.018 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 51
2025-09-13 09:45:13.018 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 51
2025-09-13 09:45:13.018 [Thd =179]  Info Default  开始扫描条带； [51/209]
2025-09-13 09:45:13.021 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:13.023 [Thd =20]  Info Default ***row:51, vectorBeginX:-16.356, vectorBeginY:15.718, captureBeginX:-12.736, captureBeginY:15.718, captureEndX:10.761, captureEndY:15.718, vectorEndX:14.663, vectorEndY:15.718
2025-09-13 09:45:13.023 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:13.025 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361668903368,EndPoint:-10.7607074823736
2025-09-13 09:45:14.227 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:51
2025-09-13 09:45:14.230 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:14.230 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:14.230 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:51
2025-09-13 09:45:14.230 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:14.230 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:A_SourceLightType
2025-09-13 09:45:14.230 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:B_SourceLightType
2025-09-13 09:45:14.230 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,A_SourceLightType
2025-09-13 09:45:14.230 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,B_SourceLightType
2025-09-13 09:45:14.262 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:14
2025-09-13 09:45:14.281 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:14.283 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_51_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:14.301 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:14
2025-09-13 09:45:14.361 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:14.363 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_51_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:14.493 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;51/209,
2025-09-13 09:45:14.502 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:14.665 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:15.006 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 52
2025-09-13 09:45:15.006 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 52
2025-09-13 09:45:15.006 [Thd =86]  Info Default  开始扫描条带； [52/209]
2025-09-13 09:45:15.009 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:15.011 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:15.29048, CaptureEndX:-12.39936, CaptureEndY:15.29048, VectorBeginX:14.66320, VectorBeginY:15.29048, VectorEndX:-16.35592, VectorEndY:15.29048, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:15.011 [Thd =20]  Info Default ***row:52, vectorBeginX:14.663, vectorBeginY:15.290, captureBeginX:11.098, captureBeginY:15.290, captureEndX:-12.399, captureEndY:15.290, vectorEndX:-16.356, vectorEndY:15.290
2025-09-13 09:45:15.011 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:15.012 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975181199183,EndPoint:12.3993562527921
2025-09-13 09:45:16.212 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:52
2025-09-13 09:45:16.213 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:16.213 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:16.213 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:52
2025-09-13 09:45:16.213 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:16.213 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:A_SourceLightType
2025-09-13 09:45:16.214 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:B_SourceLightType
2025-09-13 09:45:16.214 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,A_SourceLightType
2025-09-13 09:45:16.214 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,B_SourceLightType
2025-09-13 09:45:16.261 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:16.263 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_52_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:16.310 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:16.312 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_52_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:16.482 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;52/209,
2025-09-13 09:45:16.491 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:16.555 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:16.908 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 53
2025-09-13 09:45:16.908 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 53
2025-09-13 09:45:16.908 [Thd =65]  Info Default  开始扫描条带； [53/209]
2025-09-13 09:45:16.911 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:16.913 [Thd =20]  Info Default ***row:53, vectorBeginX:-16.356, vectorBeginY:14.863, captureBeginX:-12.736, captureBeginY:14.863, captureEndX:10.761, captureEndY:14.863, vectorEndX:14.663, vectorEndY:14.863
2025-09-13 09:45:16.913 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:16.915 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361711017626,EndPoint:-10.7607032709478
2025-09-13 09:45:17.339 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:17
2025-09-13 09:45:17.363 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:17
2025-09-13 09:45:18.117 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:53
2025-09-13 09:45:18.118 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:18.118 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:18.119 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:53
2025-09-13 09:45:18.119 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:18.119 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:A_SourceLightType
2025-09-13 09:45:18.119 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:B_SourceLightType
2025-09-13 09:45:18.119 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,A_SourceLightType
2025-09-13 09:45:18.119 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,B_SourceLightType
2025-09-13 09:45:18.166 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:18.168 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_53_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:18.216 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:18.218 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_53_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:18.388 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;53/209,
2025-09-13 09:45:18.397 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:18.447 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:18.797 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 54
2025-09-13 09:45:18.797 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 54
2025-09-13 09:45:18.797 [Thd =77]  Info Default  开始扫描条带； [54/209]
2025-09-13 09:45:18.799 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:18.802 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:14.43538, CaptureEndX:-12.39936, CaptureEndY:14.43538, VectorBeginX:14.66319, VectorBeginY:14.43538, VectorEndX:-16.35593, VectorEndY:14.43538, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:18.802 [Thd =20]  Info Default ***row:54, vectorBeginX:14.663, vectorBeginY:14.435, captureBeginX:11.098, captureBeginY:14.435, captureEndX:-12.399, captureEndY:14.435, vectorEndX:-16.356, vectorEndY:14.435
2025-09-13 09:45:18.802 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:18.803 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097510856682,EndPoint:12.3993635160284
2025-09-13 09:45:18.972 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:18
2025-09-13 09:45:19.010 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:19
2025-09-13 09:45:20.004 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:54
2025-09-13 09:45:20.005 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:20.005 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:20.006 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:54
2025-09-13 09:45:20.006 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:20.006 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:B_SourceLightType
2025-09-13 09:45:20.006 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:A_SourceLightType
2025-09-13 09:45:20.006 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,B_SourceLightType
2025-09-13 09:45:20.006 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,A_SourceLightType
2025-09-13 09:45:20.052 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:20.054 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_54_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:20.110 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:20.112 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_54_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:20.273 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;54/209,
2025-09-13 09:45:20.282 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:20.409 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:20.749 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 55
2025-09-13 09:45:20.749 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 55
2025-09-13 09:45:20.749 [Thd =65]  Info Default  开始扫描条带； [55/209]
2025-09-13 09:45:20.752 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:20.754 [Thd =20]  Info Default ***row:55, vectorBeginX:-16.356, vectorBeginY:14.008, captureBeginX:-12.736, captureBeginY:14.008, captureEndX:10.761, captureEndY:14.008, vectorEndX:14.663, vectorEndY:14.008
2025-09-13 09:45:20.754 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:20.755 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361778766649,EndPoint:-10.7606964960455
2025-09-13 09:45:21.108 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:21
2025-09-13 09:45:21.131 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:21
2025-09-13 09:45:21.959 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:55
2025-09-13 09:45:21.959 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:21.959 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:21.960 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:55
2025-09-13 09:45:21.960 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:21.960 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:A_SourceLightType
2025-09-13 09:45:21.960 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:B_SourceLightType
2025-09-13 09:45:21.960 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,A_SourceLightType
2025-09-13 09:45:21.960 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,B_SourceLightType
2025-09-13 09:45:22.006 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:22.008 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_55_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:22.059 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:22.061 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_55_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:22.226 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;55/209,
2025-09-13 09:45:22.235 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:22.277 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:22.626 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 56
2025-09-13 09:45:22.626 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 56
2025-09-13 09:45:22.626 [Thd =68]  Info Default  开始扫描条带； [56/209]
2025-09-13 09:45:22.629 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:22.631 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:13.58028, CaptureEndX:-12.39937, CaptureEndY:13.58028, VectorBeginX:14.66318, VectorBeginY:13.58028, VectorEndX:-16.35594, VectorEndY:13.58028, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:22.631 [Thd =20]  Info Default ***row:56, vectorBeginX:14.663, vectorBeginY:13.580, captureBeginX:11.098, captureBeginY:13.580, captureEndX:-12.399, captureEndY:13.580, vectorEndX:-16.356, vectorEndY:13.580
2025-09-13 09:45:22.631 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:22.633 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975050582575,EndPoint:12.3993693144529
2025-09-13 09:45:23.248 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:23
2025-09-13 09:45:23.268 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:23
2025-09-13 09:45:23.838 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:56
2025-09-13 09:45:23.838 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:23.838 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:23.839 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:56
2025-09-13 09:45:23.839 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:23.839 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:B_SourceLightType
2025-09-13 09:45:23.839 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:A_SourceLightType
2025-09-13 09:45:23.839 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,B_SourceLightType
2025-09-13 09:45:23.839 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,A_SourceLightType
2025-09-13 09:45:23.888 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:23.890 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_56_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:23.937 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:23.938 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_56_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:23.955 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:23
2025-09-13 09:45:24.000 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:24
2025-09-13 09:45:24.105 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;56/209,
2025-09-13 09:45:24.114 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:24.307 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:24.659 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 57
2025-09-13 09:45:24.659 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 57
2025-09-13 09:45:24.659 [Thd =176]  Info Default  开始扫描条带； [57/209]
2025-09-13 09:45:24.661 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:24.663 [Thd =20]  Info Default ***row:57, vectorBeginX:-16.356, vectorBeginY:13.153, captureBeginX:-12.736, captureBeginY:13.153, captureEndX:10.761, captureEndY:13.153, vectorEndX:14.663, vectorEndY:13.153
2025-09-13 09:45:24.663 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:24.665 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361803180712,EndPoint:-10.7606940546392
2025-09-13 09:45:25.877 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:57
2025-09-13 09:45:25.877 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:25.880 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:25.883 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:57
2025-09-13 09:45:25.884 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:25.884 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:B_SourceLightType
2025-09-13 09:45:25.884 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:A_SourceLightType
2025-09-13 09:45:25.884 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,B_SourceLightType
2025-09-13 09:45:25.884 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,A_SourceLightType
2025-09-13 09:45:25.967 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:25.969 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_57_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:26.023 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:26.025 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_57_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:26.132 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;57/209,
2025-09-13 09:45:26.141 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:26.276 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:26.516 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:26
2025-09-13 09:45:26.557 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:26
2025-09-13 09:45:26.626 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 58
2025-09-13 09:45:26.626 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 58
2025-09-13 09:45:26.626 [Thd =176]  Info Default  开始扫描条带； [58/209]
2025-09-13 09:45:26.628 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:26.639 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:12.72519, CaptureEndX:-12.39937, CaptureEndY:12.72519, VectorBeginX:14.66318, VectorBeginY:12.72519, VectorEndX:-16.35594, VectorEndY:12.72519, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:26.639 [Thd =20]  Info Default ***row:58, vectorBeginX:14.663, vectorBeginY:12.725, captureBeginX:11.098, captureBeginY:12.725, captureEndX:-12.399, captureEndY:12.725, vectorEndX:-16.356, vectorEndY:12.725
2025-09-13 09:45:26.639 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:26.641 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975053634028,EndPoint:12.3993690093076
2025-09-13 09:45:26.803 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:26
2025-09-13 09:45:26.856 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:26
2025-09-13 09:45:27.841 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:58
2025-09-13 09:45:27.841 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:27.848 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:58
2025-09-13 09:45:27.848 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:27.848 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:27.848 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:A_SourceLightType
2025-09-13 09:45:27.848 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:B_SourceLightType
2025-09-13 09:45:27.848 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,A_SourceLightType
2025-09-13 09:45:27.848 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,B_SourceLightType
2025-09-13 09:45:27.899 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:27.900 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_58_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:27.911 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:27
2025-09-13 09:45:27.934 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:27
2025-09-13 09:45:28.000 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:28.002 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_58_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:28.114 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;58/209,
2025-09-13 09:45:28.123 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:28.245 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:28.592 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 59
2025-09-13 09:45:28.592 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 59
2025-09-13 09:45:28.592 [Thd =195]  Info Default  开始扫描条带； [59/209]
2025-09-13 09:45:28.594 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:28.597 [Thd =20]  Info Default ***row:59, vectorBeginX:-16.356, vectorBeginY:12.298, captureBeginX:-12.736, captureBeginY:12.298, captureEndX:10.761, captureEndY:12.298, vectorEndX:14.663, vectorEndY:12.298
2025-09-13 09:45:28.597 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:28.598 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736179463579,EndPoint:-10.7606949091314
2025-09-13 09:45:29.800 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:59
2025-09-13 09:45:29.800 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:29.800 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:29.803 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:59
2025-09-13 09:45:29.803 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:29.803 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:A_SourceLightType
2025-09-13 09:45:29.803 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:B_SourceLightType
2025-09-13 09:45:29.803 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,A_SourceLightType
2025-09-13 09:45:29.803 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,B_SourceLightType
2025-09-13 09:45:29.849 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:29.852 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_59_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:29.900 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:29.902 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_59_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:30.065 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;59/209,
2025-09-13 09:45:30.074 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:30.141 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:30.482 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 60
2025-09-13 09:45:30.482 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 60
2025-09-13 09:45:30.482 [Thd =124]  Info Default  开始扫描条带； [60/209]
2025-09-13 09:45:30.484 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:30.486 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:11.87009, CaptureEndX:-12.39937, CaptureEndY:11.87009, VectorBeginX:14.66318, VectorBeginY:11.87009, VectorEndX:-16.35593, VectorEndY:11.87009, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:30.486 [Thd =20]  Info Default ***row:60, vectorBeginX:14.663, vectorBeginY:11.870, captureBeginX:11.098, captureBeginY:11.870, captureEndX:-12.399, captureEndY:11.870, vectorEndX:-16.356, vectorEndY:11.870
2025-09-13 09:45:30.486 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:30.488 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975074386088,EndPoint:12.3993669341016
2025-09-13 09:45:31.688 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:60
2025-09-13 09:45:31.688 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:31.688 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:31.689 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:60
2025-09-13 09:45:31.690 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:31.690 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:B_SourceLightType
2025-09-13 09:45:31.690 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:A_SourceLightType
2025-09-13 09:45:31.690 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,B_SourceLightType
2025-09-13 09:45:31.690 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,A_SourceLightType
2025-09-13 09:45:31.735 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:31.737 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_60_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:31.803 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:31.804 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_60_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:31.956 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;60/209,
2025-09-13 09:45:31.965 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:32.008 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:32.356 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 61
2025-09-13 09:45:32.356 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 61
2025-09-13 09:45:32.356 [Thd =195]  Info Default  开始扫描条带； [61/209]
2025-09-13 09:45:32.358 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:32.360 [Thd =20]  Info Default ***row:61, vectorBeginX:-16.356, vectorBeginY:11.443, captureBeginX:-12.736, captureBeginY:11.443, captureEndX:10.761, captureEndY:11.443, vectorEndX:14.663, vectorEndY:11.443
2025-09-13 09:45:32.360 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:32.361 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361820880907,EndPoint:-10.7606922846197
2025-09-13 09:45:32.804 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:32
2025-09-13 09:45:32.845 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:32
2025-09-13 09:45:33.565 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:61
2025-09-13 09:45:33.565 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:33.565 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:33.566 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:61
2025-09-13 09:45:33.566 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:33.566 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:B_SourceLightType
2025-09-13 09:45:33.566 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:A_SourceLightType
2025-09-13 09:45:33.566 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,B_SourceLightType
2025-09-13 09:45:33.566 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,A_SourceLightType
2025-09-13 09:45:33.611 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:33.613 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_61_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:33.665 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:33.670 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_61_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:33.827 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;61/209,
2025-09-13 09:45:33.836 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:33.886 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:34.236 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 62
2025-09-13 09:45:34.236 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 62
2025-09-13 09:45:34.236 [Thd =77]  Info Default  开始扫描条带； [62/209]
2025-09-13 09:45:34.238 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:34.241 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:11.01499, CaptureEndX:-12.39937, CaptureEndY:11.01499, VectorBeginX:14.66318, VectorBeginY:11.01499, VectorEndX:-16.35594, VectorEndY:11.01499, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:34.241 [Thd =20]  Info Default ***row:62, vectorBeginX:14.663, vectorBeginY:11.015, captureBeginX:11.098, captureBeginY:11.015, captureEndX:-12.399, captureEndY:11.015, vectorEndX:-16.356, vectorEndY:11.015
2025-09-13 09:45:34.241 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:34.242 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975047530291,EndPoint:12.3993696196813
2025-09-13 09:45:34.820 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:34
2025-09-13 09:45:34.877 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:34
2025-09-13 09:45:35.442 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:62
2025-09-13 09:45:35.443 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:35.443 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:35.444 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:62
2025-09-13 09:45:35.444 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:35.444 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:A_SourceLightType
2025-09-13 09:45:35.444 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:B_SourceLightType
2025-09-13 09:45:35.445 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,A_SourceLightType
2025-09-13 09:45:35.445 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,B_SourceLightType
2025-09-13 09:45:35.492 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:35.494 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_62_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:35.512 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:35
2025-09-13 09:45:35.530 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:35
2025-09-13 09:45:35.543 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:35.544 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_62_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:35.712 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;62/209,
2025-09-13 09:45:35.721 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:35.872 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:36.222 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 63
2025-09-13 09:45:36.222 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 63
2025-09-13 09:45:36.222 [Thd =77]  Info Default  开始扫描条带； [63/209]
2025-09-13 09:45:36.225 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:36.227 [Thd =20]  Info Default ***row:63, vectorBeginX:-16.356, vectorBeginY:10.587, captureBeginX:-12.736, captureBeginY:10.587, captureEndX:10.761, captureEndY:10.587, vectorEndX:14.663, vectorEndY:10.587
2025-09-13 09:45:36.227 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:36.228 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361771442431,EndPoint:-10.7606972284673
2025-09-13 09:45:36.534 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:36
2025-09-13 09:45:36.562 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:36
2025-09-13 09:45:37.430 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:63
2025-09-13 09:45:37.431 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:37.431 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:37.432 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:63
2025-09-13 09:45:37.432 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:37.432 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:B_SourceLightType
2025-09-13 09:45:37.432 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:A_SourceLightType
2025-09-13 09:45:37.432 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,B_SourceLightType
2025-09-13 09:45:37.432 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,A_SourceLightType
2025-09-13 09:45:37.484 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:37.486 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_63_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:37.534 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:37.536 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_63_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:37.703 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;63/209,
2025-09-13 09:45:37.713 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:37.755 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:38.105 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 64
2025-09-13 09:45:38.105 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 64
2025-09-13 09:45:38.105 [Thd =50]  Info Default  开始扫描条带； [64/209]
2025-09-13 09:45:38.107 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:38.110 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:10.15990, CaptureEndX:-12.39937, CaptureEndY:10.15990, VectorBeginX:14.66319, VectorBeginY:10.15990, VectorEndX:-16.35593, VectorEndY:10.15990, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:38.110 [Thd =20]  Info Default ***row:64, vectorBeginX:14.663, vectorBeginY:10.160, captureBeginX:11.098, captureBeginY:10.160, captureEndX:-12.399, captureEndY:10.160, vectorEndX:-16.356, vectorEndY:10.160
2025-09-13 09:45:38.110 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:38.111 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975080489893,EndPoint:12.3993663237211
2025-09-13 09:45:39.311 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:64
2025-09-13 09:45:39.311 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:39.312 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:39.312 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:64
2025-09-13 09:45:39.312 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:39.312 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:A_SourceLightType
2025-09-13 09:45:39.312 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:B_SourceLightType
2025-09-13 09:45:39.312 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,A_SourceLightType
2025-09-13 09:45:39.312 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,B_SourceLightType
2025-09-13 09:45:39.364 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:39.365 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_64_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:39.419 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:39.421 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_64_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:39.577 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;64/209,
2025-09-13 09:45:39.586 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:39.649 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:39.990 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 65
2025-09-13 09:45:39.990 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 65
2025-09-13 09:45:39.990 [Thd =50]  Info Default  开始扫描条带； [65/209]
2025-09-13 09:45:39.992 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:39.995 [Thd =20]  Info Default ***row:65, vectorBeginX:-16.356, vectorBeginY:9.732, captureBeginX:-12.736, captureBeginY:9.732, captureEndX:10.761, captureEndY:9.732, vectorEndX:14.663, vectorEndY:9.732
2025-09-13 09:45:39.995 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:39.996 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361799518602,EndPoint:-10.7606944208502
2025-09-13 09:45:40.073 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:40
2025-09-13 09:45:40.089 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:40
2025-09-13 09:45:40.089 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:40
2025-09-13 09:45:40.103 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:40
2025-09-13 09:45:41.198 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:65
2025-09-13 09:45:41.198 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:41.198 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:41.202 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:65
2025-09-13 09:45:41.202 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:41.202 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:A_SourceLightType
2025-09-13 09:45:41.202 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:B_SourceLightType
2025-09-13 09:45:41.202 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,A_SourceLightType
2025-09-13 09:45:41.202 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,B_SourceLightType
2025-09-13 09:45:41.250 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:41.252 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_65_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:41.306 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:41.308 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_65_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:41.472 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;65/209,
2025-09-13 09:45:41.481 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:41.536 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:41.888 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 66
2025-09-13 09:45:41.888 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 66
2025-09-13 09:45:41.888 [Thd =138]  Info Default  开始扫描条带； [66/209]
2025-09-13 09:45:41.890 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:41.892 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:9.30480, CaptureEndX:-12.39937, CaptureEndY:9.30480, VectorBeginX:14.66318, VectorBeginY:9.30480, VectorEndX:-16.35594, VectorEndY:9.30480, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:41.893 [Thd =20]  Info Default ***row:66, vectorBeginX:14.663, vectorBeginY:9.305, captureBeginX:11.098, captureBeginY:9.305, captureEndX:-12.399, captureEndY:9.305, vectorEndX:-16.356, vectorEndY:9.305
2025-09-13 09:45:41.893 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:41.894 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097506401005,EndPoint:12.3993679717054
2025-09-13 09:45:43.093 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:66
2025-09-13 09:45:43.093 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:43.093 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:43.094 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:66
2025-09-13 09:45:43.094 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:43.094 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:A_SourceLightType
2025-09-13 09:45:43.094 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:B_SourceLightType
2025-09-13 09:45:43.097 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,A_SourceLightType
2025-09-13 09:45:43.097 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,B_SourceLightType
2025-09-13 09:45:43.148 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:43.150 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_66_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:43.197 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:43.199 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_66_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:43.360 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;66/209,
2025-09-13 09:45:43.369 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:43.441 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:43.790 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 67
2025-09-13 09:45:43.790 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 67
2025-09-13 09:45:43.790 [Thd =158]  Info Default  开始扫描条带； [67/209]
2025-09-13 09:45:43.792 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:43.794 [Thd =20]  Info Default ***row:67, vectorBeginX:-16.356, vectorBeginY:8.877, captureBeginX:-12.736, captureBeginY:8.877, captureEndX:10.761, captureEndY:8.877, vectorEndX:14.663, vectorEndY:8.877
2025-09-13 09:45:43.794 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:43.796 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361800739306,EndPoint:-10.7606942987798
2025-09-13 09:45:44.161 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:44
2025-09-13 09:45:44.185 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:44
2025-09-13 09:45:44.999 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:67
2025-09-13 09:45:44.999 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:44.999 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:45.000 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:67
2025-09-13 09:45:45.000 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:45.000 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:B_SourceLightType
2025-09-13 09:45:45.000 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,B_SourceLightType
2025-09-13 09:45:45.000 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,A_SourceLightType
2025-09-13 09:45:45.000 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:A_SourceLightType
2025-09-13 09:45:45.050 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:45.051 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_67_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:45.100 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:45.101 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_67_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:45.265 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;67/209,
2025-09-13 09:45:45.274 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:45.324 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:45.673 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 68
2025-09-13 09:45:45.673 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 68
2025-09-13 09:45:45.673 [Thd =176]  Info Default  开始扫描条带； [68/209]
2025-09-13 09:45:45.675 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:45.677 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:8.44970, CaptureEndX:-12.39937, CaptureEndY:8.44970, VectorBeginX:14.66318, VectorBeginY:8.44970, VectorEndX:-16.35594, VectorEndY:8.44970, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:45.677 [Thd =20]  Info Default ***row:68, vectorBeginX:14.663, vectorBeginY:8.450, captureBeginX:11.098, captureBeginY:8.450, captureEndX:-12.399, captureEndY:8.450, vectorEndX:-16.356, vectorEndY:8.450
2025-09-13 09:45:45.677 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:45.678 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975068282496,EndPoint:12.3993675444608
2025-09-13 09:45:45.998 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:45
2025-09-13 09:45:46.018 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:46
2025-09-13 09:45:46.878 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:68
2025-09-13 09:45:46.879 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:46.879 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:46.879 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:68
2025-09-13 09:45:46.879 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:46.879 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:B_SourceLightType
2025-09-13 09:45:46.879 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,B_SourceLightType
2025-09-13 09:45:46.879 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,A_SourceLightType
2025-09-13 09:45:46.879 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:A_SourceLightType
2025-09-13 09:45:46.931 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:46.933 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_68_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:46.994 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:46.996 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_68_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:47.143 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;68/209,
2025-09-13 09:45:47.152 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:47.326 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:47.625 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:47
2025-09-13 09:45:47.669 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 69
2025-09-13 09:45:47.669 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 69
2025-09-13 09:45:47.669 [Thd =66]  Info Default  开始扫描条带； [69/209]
2025-09-13 09:45:47.671 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:47.673 [Thd =20]  Info Default ***row:69, vectorBeginX:-16.356, vectorBeginY:8.022, captureBeginX:-12.736, captureBeginY:8.022, captureEndX:10.761, captureEndY:8.022, vectorEndX:14.663, vectorEndY:8.022
2025-09-13 09:45:47.673 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:47.674 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361748859423,EndPoint:-10.7606994867681
2025-09-13 09:45:47.683 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:47
2025-09-13 09:45:48.185 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:48
2025-09-13 09:45:48.220 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:48
2025-09-13 09:45:48.878 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:69
2025-09-13 09:45:48.879 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:48.879 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:48.879 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:69
2025-09-13 09:45:48.879 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:48.879 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:A_SourceLightType
2025-09-13 09:45:48.879 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:B_SourceLightType
2025-09-13 09:45:48.879 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,A_SourceLightType
2025-09-13 09:45:48.880 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,B_SourceLightType
2025-09-13 09:45:48.926 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:48.928 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_69_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:48.986 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:48.988 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_69_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:49.149 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;69/209,
2025-09-13 09:45:49.158 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:49.207 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:49.558 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 70
2025-09-13 09:45:49.558 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 70
2025-09-13 09:45:49.558 [Thd =50]  Info Default  开始扫描条带； [70/209]
2025-09-13 09:45:49.561 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:49.563 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:7.59460, CaptureEndX:-12.39936, CaptureEndY:7.59460, VectorBeginX:14.66319, VectorBeginY:7.59460, VectorEndX:-16.35593, VectorEndY:7.59460, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:49.563 [Thd =20]  Info Default ***row:70, vectorBeginX:14.663, vectorBeginY:7.595, captureBeginX:11.098, captureBeginY:7.595, captureEndX:-12.399, captureEndY:7.595, vectorEndX:-16.356, vectorEndY:7.595
2025-09-13 09:45:49.563 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:49.564 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975128707949,EndPoint:12.3993615019155
2025-09-13 09:45:49.944 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:49
2025-09-13 09:45:49.961 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:49
2025-09-13 09:45:50.765 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:70
2025-09-13 09:45:50.765 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:50.765 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:50.765 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:70
2025-09-13 09:45:50.765 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:50.765 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:A_SourceLightType
2025-09-13 09:45:50.766 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:B_SourceLightType
2025-09-13 09:45:50.766 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,A_SourceLightType
2025-09-13 09:45:50.766 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,B_SourceLightType
2025-09-13 09:45:50.812 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:50.814 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_70_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:50.864 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:50.866 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_70_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:51.029 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;70/209,
2025-09-13 09:45:51.038 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:51.084 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:51.434 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 71
2025-09-13 09:45:51.434 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 71
2025-09-13 09:45:51.434 [Thd =172]  Info Default  开始扫描条带； [71/209]
2025-09-13 09:45:51.436 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:51.438 [Thd =20]  Info Default ***row:71, vectorBeginX:-16.356, vectorBeginY:7.167, captureBeginX:-12.736, captureBeginY:7.167, captureEndX:10.761, captureEndY:7.167, vectorEndX:14.663, vectorEndY:7.167
2025-09-13 09:45:51.439 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:51.440 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361772052782,EndPoint:-10.7606971674322
2025-09-13 09:45:52.644 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:71
2025-09-13 09:45:52.645 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:52.645 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:52.645 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:71
2025-09-13 09:45:52.645 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:52.645 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:A_SourceLightType
2025-09-13 09:45:52.645 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,A_SourceLightType
2025-09-13 09:45:52.645 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,B_SourceLightType
2025-09-13 09:45:52.645 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:B_SourceLightType
2025-09-13 09:45:52.694 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:52.696 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_71_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:52.755 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:52.757 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_71_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:52.906 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;71/209,
2025-09-13 09:45:52.915 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:52.957 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:53.305 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 72
2025-09-13 09:45:53.305 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 72
2025-09-13 09:45:53.305 [Thd =172]  Info Default  开始扫描条带； [72/209]
2025-09-13 09:45:53.308 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:53.310 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:6.73950, CaptureEndX:-12.39937, CaptureEndY:6.73950, VectorBeginX:14.66319, VectorBeginY:6.73950, VectorEndX:-16.35593, VectorEndY:6.73950, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:53.310 [Thd =20]  Info Default ***row:72, vectorBeginX:14.663, vectorBeginY:6.739, captureBeginX:11.098, captureBeginY:6.739, captureEndX:-12.399, captureEndY:6.739, vectorEndX:-16.356, vectorEndY:6.739
2025-09-13 09:45:53.310 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:53.312 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975084762346,EndPoint:12.3993658964758
2025-09-13 09:45:53.973 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:53
2025-09-13 09:45:53.999 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:53
2025-09-13 09:45:54.512 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:72
2025-09-13 09:45:54.512 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:54.512 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:54.513 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:72
2025-09-13 09:45:54.513 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:54.513 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:B_SourceLightType
2025-09-13 09:45:54.513 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,B_SourceLightType
2025-09-13 09:45:54.513 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,A_SourceLightType
2025-09-13 09:45:54.513 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:A_SourceLightType
2025-09-13 09:45:54.561 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:54.564 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_72_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:54.613 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:54.615 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_72_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:54.785 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;72/209,
2025-09-13 09:45:54.794 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:54.839 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:55.189 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 73
2025-09-13 09:45:55.189 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 73
2025-09-13 09:45:55.189 [Thd =143]  Info Default  开始扫描条带； [73/209]
2025-09-13 09:45:55.191 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:55.194 [Thd =20]  Info Default ***row:73, vectorBeginX:-16.356, vectorBeginY:6.312, captureBeginX:-12.736, captureBeginY:6.312, captureEndX:10.761, captureEndY:6.312, vectorEndX:14.663, vectorEndY:6.312
2025-09-13 09:45:55.194 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:55.195 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361795856493,EndPoint:-10.7606947870611
2025-09-13 09:45:55.505 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:55
2025-09-13 09:45:55.533 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:55
2025-09-13 09:45:56.397 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:73
2025-09-13 09:45:56.397 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:56.397 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:56.398 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:73
2025-09-13 09:45:56.398 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:56.398 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:B_SourceLightType
2025-09-13 09:45:56.398 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,B_SourceLightType
2025-09-13 09:45:56.398 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,A_SourceLightType
2025-09-13 09:45:56.398 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:A_SourceLightType
2025-09-13 09:45:56.447 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:56.449 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_73_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:56.497 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:56.499 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_73_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:56.669 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;73/209,
2025-09-13 09:45:56.678 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:56.725 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:57.076 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 74
2025-09-13 09:45:57.076 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 74
2025-09-13 09:45:57.076 [Thd =138]  Info Default  开始扫描条带； [74/209]
2025-09-13 09:45:57.078 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:45:57.082 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:5.88440, CaptureEndX:-12.39937, CaptureEndY:5.88440, VectorBeginX:14.66319, VectorBeginY:5.88440, VectorEndX:-16.35593, VectorEndY:5.88440, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:45:57.083 [Thd =20]  Info Default ***row:74, vectorBeginX:14.663, vectorBeginY:5.884, captureBeginX:11.098, captureBeginY:5.884, captureEndX:-12.399, captureEndY:5.884, vectorEndX:-16.356, vectorEndY:5.884
2025-09-13 09:45:57.083 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:57.084 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097508903451,EndPoint:12.3993654692594
2025-09-13 09:45:57.359 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:57
2025-09-13 09:45:57.406 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:57
2025-09-13 09:45:57.613 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:45:57
2025-09-13 09:45:57.655 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:45:57
2025-09-13 09:45:58.283 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:74
2025-09-13 09:45:58.284 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:58.284 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:45:58.285 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:74
2025-09-13 09:45:58.285 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:45:58.285 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:B_SourceLightType
2025-09-13 09:45:58.285 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:A_SourceLightType
2025-09-13 09:45:58.285 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,B_SourceLightType
2025-09-13 09:45:58.285 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,A_SourceLightType
2025-09-13 09:45:58.335 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:45:58.338 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_74_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:58.387 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:45:58.389 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_74_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:45:58.558 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;74/209,
2025-09-13 09:45:58.567 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:45:58.616 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:45:58.964 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 75
2025-09-13 09:45:58.964 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 75
2025-09-13 09:45:58.964 [Thd =158]  Info Default  开始扫描条带； [75/209]
2025-09-13 09:45:58.966 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:45:58.969 [Thd =20]  Info Default ***row:75, vectorBeginX:-16.356, vectorBeginY:5.457, captureBeginX:-12.736, captureBeginY:5.457, captureEndX:10.761, captureEndY:5.457, vectorEndX:14.663, vectorEndY:5.457
2025-09-13 09:45:58.969 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:45:58.970 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361784259813,EndPoint:-10.7606959467291
2025-09-13 09:46:00.173 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:75
2025-09-13 09:46:00.174 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:00.174 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:00.175 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:75
2025-09-13 09:46:00.175 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:00.176 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:B_SourceLightType
2025-09-13 09:46:00.176 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:A_SourceLightType
2025-09-13 09:46:00.176 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,B_SourceLightType
2025-09-13 09:46:00.176 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,A_SourceLightType
2025-09-13 09:46:00.211 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:00
2025-09-13 09:46:00.236 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:00
2025-09-13 09:46:00.238 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:00.241 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_75_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:00.290 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:00.291 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_75_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:00.437 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;75/209,
2025-09-13 09:46:00.446 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:00.554 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:00.893 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:00
2025-09-13 09:46:00.904 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 76
2025-09-13 09:46:00.910 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 76
2025-09-13 09:46:00.910 [Thd =86]  Info Default  开始扫描条带； [76/209]
2025-09-13 09:46:00.913 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:00.916 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:5.02931, CaptureEndX:-12.39937, CaptureEndY:5.02931, VectorBeginX:14.66318, VectorBeginY:5.02931, VectorEndX:-16.35594, VectorEndY:5.02931, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:00.916 [Thd =20]  Info Default ***row:76, vectorBeginX:14.663, vectorBeginY:5.029, captureBeginX:11.098, captureBeginY:5.029, captureEndX:-12.399, captureEndY:5.029, vectorEndX:-16.356, vectorEndY:5.029
2025-09-13 09:46:00.916 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:00.917 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975068282702,EndPoint:12.3993675444402
2025-09-13 09:46:00.920 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:00
2025-09-13 09:46:02.116 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:76
2025-09-13 09:46:02.116 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:02.116 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:02.117 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:76
2025-09-13 09:46:02.117 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:02.117 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:B_SourceLightType
2025-09-13 09:46:02.117 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:A_SourceLightType
2025-09-13 09:46:02.117 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,B_SourceLightType
2025-09-13 09:46:02.117 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,A_SourceLightType
2025-09-13 09:46:02.169 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:02.171 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_76_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:02.220 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:02.222 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_76_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:02.390 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;76/209,
2025-09-13 09:46:02.399 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:02.423 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:02
2025-09-13 09:46:02.444 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:02.574 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:02
2025-09-13 09:46:02.795 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 77
2025-09-13 09:46:02.795 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 77
2025-09-13 09:46:02.795 [Thd =54]  Info Default  开始扫描条带； [77/209]
2025-09-13 09:46:02.798 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:02.800 [Thd =20]  Info Default ***row:77, vectorBeginX:-16.356, vectorBeginY:4.602, captureBeginX:-12.736, captureBeginY:4.602, captureEndX:10.761, captureEndY:4.602, vectorEndX:14.663, vectorEndY:4.602
2025-09-13 09:46:02.800 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:02.802 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361826374071,EndPoint:-10.7606917353033
2025-09-13 09:46:04.003 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:77
2025-09-13 09:46:04.004 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:04.004 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:04.005 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:77
2025-09-13 09:46:04.006 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:04.006 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:A_SourceLightType
2025-09-13 09:46:04.006 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:B_SourceLightType
2025-09-13 09:46:04.006 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,A_SourceLightType
2025-09-13 09:46:04.006 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,B_SourceLightType
2025-09-13 09:46:04.058 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:04.060 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_77_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:04.113 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:04.115 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_77_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:04.268 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;77/209,
2025-09-13 09:46:04.284 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:04.487 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:04.841 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 78
2025-09-13 09:46:04.841 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 78
2025-09-13 09:46:04.841 [Thd =151]  Info Default  开始扫描条带； [78/209]
2025-09-13 09:46:04.843 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:04.845 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:4.17422, CaptureEndX:-12.39937, CaptureEndY:4.17422, VectorBeginX:14.66318, VectorBeginY:4.17422, VectorEndX:-16.35594, VectorEndY:4.17422, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:04.845 [Thd =20]  Info Default ***row:78, vectorBeginX:14.663, vectorBeginY:4.174, captureBeginX:11.098, captureBeginY:4.174, captureEndX:-12.399, captureEndY:4.174, vectorEndX:-16.356, vectorEndY:4.174
2025-09-13 09:46:04.845 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:04.847 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975029830027,EndPoint:12.3993713897077
2025-09-13 09:46:05.289 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:05
2025-09-13 09:46:05.336 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:05
2025-09-13 09:46:06.046 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:78
2025-09-13 09:46:06.046 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:06.046 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:06.048 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:78
2025-09-13 09:46:06.049 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:06.049 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:B_SourceLightType
2025-09-13 09:46:06.049 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:A_SourceLightType
2025-09-13 09:46:06.049 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,B_SourceLightType
2025-09-13 09:46:06.049 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,A_SourceLightType
2025-09-13 09:46:06.098 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:06.100 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_78_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:06.147 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:06.149 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_78_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:06.317 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;78/209,
2025-09-13 09:46:06.380 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:06.425 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:06.781 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 79
2025-09-13 09:46:06.781 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 79
2025-09-13 09:46:06.781 [Thd =143]  Info Default  开始扫描条带； [79/209]
2025-09-13 09:46:06.784 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:06.786 [Thd =20]  Info Default ***row:79, vectorBeginX:-16.356, vectorBeginY:3.747, captureBeginX:-12.736, captureBeginY:3.747, captureEndX:10.761, captureEndY:3.747, vectorEndX:14.663, vectorEndY:3.747
2025-09-13 09:46:06.786 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:06.787 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361891071337,EndPoint:-10.7606852655767
2025-09-13 09:46:07.992 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:79
2025-09-13 09:46:07.992 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:07.992 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:07.993 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:79
2025-09-13 09:46:07.993 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:07.993 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:B_SourceLightType
2025-09-13 09:46:07.993 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,B_SourceLightType
2025-09-13 09:46:07.994 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,A_SourceLightType
2025-09-13 09:46:07.994 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:A_SourceLightType
2025-09-13 09:46:08.040 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:08.041 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_79_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:08.090 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:08.091 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_79_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:08.254 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;79/209,
2025-09-13 09:46:08.263 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:08.430 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:08.779 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 80
2025-09-13 09:46:08.779 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 80
2025-09-13 09:46:08.779 [Thd =77]  Info Default  开始扫描条带； [80/209]
2025-09-13 09:46:08.781 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:08.784 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:3.31912, CaptureEndX:-12.39938, CaptureEndY:3.31912, VectorBeginX:14.66318, VectorBeginY:3.31912, VectorEndX:-16.35594, VectorEndY:3.31912, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:08.784 [Thd =20]  Info Default ***row:80, vectorBeginX:14.663, vectorBeginY:3.319, captureBeginX:11.097, captureBeginY:3.319, captureEndX:-12.399, captureEndY:3.319, vectorEndX:-16.356, vectorEndY:3.319
2025-09-13 09:46:08.784 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:08.785 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974989546015,EndPoint:12.3993754181089
2025-09-13 09:46:08.792 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:08
2025-09-13 09:46:08.807 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:08
2025-09-13 09:46:08.807 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:08
2025-09-13 09:46:08.823 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:08
2025-09-13 09:46:09.987 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:80
2025-09-13 09:46:09.987 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:09.987 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:09.988 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:80
2025-09-13 09:46:09.988 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:09.988 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:B_SourceLightType
2025-09-13 09:46:09.988 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:A_SourceLightType
2025-09-13 09:46:09.988 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,B_SourceLightType
2025-09-13 09:46:09.988 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,A_SourceLightType
2025-09-13 09:46:10.035 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:10.037 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_80_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:10.088 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:10.089 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_80_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:10.253 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;80/209,
2025-09-13 09:46:10.263 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:10.309 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:10.328 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:10
2025-09-13 09:46:10.345 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:10
2025-09-13 09:46:10.661 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 81
2025-09-13 09:46:10.661 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 81
2025-09-13 09:46:10.661 [Thd =156]  Info Default  开始扫描条带； [81/209]
2025-09-13 09:46:10.663 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:10.665 [Thd =20]  Info Default ***row:81, vectorBeginX:-16.356, vectorBeginY:2.892, captureBeginX:-12.736, captureBeginY:2.892, captureEndX:10.761, captureEndY:2.892, vectorEndX:14.663, vectorEndY:2.892
2025-09-13 09:46:10.665 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:10.667 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361867877978,EndPoint:-10.7606875849126
2025-09-13 09:46:11.870 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:81
2025-09-13 09:46:11.870 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:11.870 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:11.871 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:81
2025-09-13 09:46:11.871 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:11.871 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:A_SourceLightType
2025-09-13 09:46:11.871 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:B_SourceLightType
2025-09-13 09:46:11.871 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,A_SourceLightType
2025-09-13 09:46:11.872 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,B_SourceLightType
2025-09-13 09:46:11.917 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:11.920 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_81_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:11.968 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:11.970 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_81_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:12.139 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;81/209,
2025-09-13 09:46:12.148 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:12.193 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:12.543 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 82
2025-09-13 09:46:12.543 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 82
2025-09-13 09:46:12.543 [Thd =54]  Info Default  开始扫描条带； [82/209]
2025-09-13 09:46:12.546 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:12.548 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:2.46403, CaptureEndX:-12.39937, CaptureEndY:2.46403, VectorBeginX:14.66318, VectorBeginY:2.46403, VectorEndX:-16.35594, VectorEndY:2.46403, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:12.548 [Thd =20]  Info Default ***row:82, vectorBeginX:14.663, vectorBeginY:2.464, captureBeginX:11.098, captureBeginY:2.464, captureEndX:-12.399, captureEndY:2.464, vectorEndX:-16.356, vectorEndY:2.464
2025-09-13 09:46:12.548 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:12.549 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975002974039,EndPoint:12.3993740753065
2025-09-13 09:46:12.851 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:12
2025-09-13 09:46:12.868 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:12
2025-09-13 09:46:13.748 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:82
2025-09-13 09:46:13.748 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:13.748 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:13.749 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:82
2025-09-13 09:46:13.749 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:13.749 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:B_SourceLightType
2025-09-13 09:46:13.749 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:A_SourceLightType
2025-09-13 09:46:13.749 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,B_SourceLightType
2025-09-13 09:46:13.749 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,A_SourceLightType
2025-09-13 09:46:13.796 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:13.798 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_82_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:13.847 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:13.849 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_82_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:14.016 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;82/209,
2025-09-13 09:46:14.025 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:14.256 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:14.604 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 83
2025-09-13 09:46:14.604 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 83
2025-09-13 09:46:14.604 [Thd =50]  Info Default  开始扫描条带； [83/209]
2025-09-13 09:46:14.607 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:14.609 [Thd =20]  Info Default ***row:83, vectorBeginX:-16.356, vectorBeginY:2.036, captureBeginX:-12.736, captureBeginY:2.036, captureEndX:10.761, captureEndY:2.036, vectorEndX:14.663, vectorEndY:2.036
2025-09-13 09:46:14.609 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:14.610 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736184529497,EndPoint:-10.7606898432134
2025-09-13 09:46:15.813 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:83
2025-09-13 09:46:15.813 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:15.813 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:15.814 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:83
2025-09-13 09:46:15.814 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:15.814 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:B_SourceLightType
2025-09-13 09:46:15.814 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:A_SourceLightType
2025-09-13 09:46:15.814 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,B_SourceLightType
2025-09-13 09:46:15.814 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,A_SourceLightType
2025-09-13 09:46:15.863 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:15.865 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_83_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:15.914 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:15.916 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_83_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:16.074 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;83/209,
2025-09-13 09:46:16.083 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:16.187 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:16.377 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:16
2025-09-13 09:46:16.393 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:16
2025-09-13 09:46:16.532 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:16
2025-09-13 09:46:16.536 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 84
2025-09-13 09:46:16.536 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 84
2025-09-13 09:46:16.536 [Thd =54]  Info Default  开始扫描条带； [84/209]
2025-09-13 09:46:16.538 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:16.541 [Thd =20]  Info Default CaptureBeginX: 11.09749, CaptureBeginY:1.60893, CaptureEndX:-12.39938, CaptureEndY:1.60893, VectorBeginX:14.66317, VectorBeginY:1.60893, VectorEndX:-16.35595, VectorEndY:1.60893, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:16.541 [Thd =20]  Info Default ***row:84, vectorBeginX:14.663, vectorBeginY:1.609, captureBeginX:11.097, captureBeginY:1.609, captureEndX:-12.399, captureEndY:1.609, vectorEndX:-16.356, vectorEndY:1.609
2025-09-13 09:46:16.541 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:16.542 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974948653032,EndPoint:12.3993795074072
2025-09-13 09:46:16.586 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:16
2025-09-13 09:46:17.742 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:84
2025-09-13 09:46:17.742 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:17.742 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:17.743 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:84
2025-09-13 09:46:17.743 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:17.743 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:B_SourceLightType
2025-09-13 09:46:17.743 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:A_SourceLightType
2025-09-13 09:46:17.743 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,B_SourceLightType
2025-09-13 09:46:17.744 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,A_SourceLightType
2025-09-13 09:46:17.793 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:17.794 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_84_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:17.847 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:17.849 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_84_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:18.011 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;84/209,
2025-09-13 09:46:18.021 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:18.171 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:18.521 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 85
2025-09-13 09:46:18.521 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 85
2025-09-13 09:46:18.521 [Thd =86]  Info Default  开始扫描条带； [85/209]
2025-09-13 09:46:18.523 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:18.526 [Thd =20]  Info Default ***row:85, vectorBeginX:-16.356, vectorBeginY:1.181, captureBeginX:-12.736, captureBeginY:1.181, captureEndX:10.761, captureEndY:1.181, vectorEndX:14.663, vectorEndY:1.181
2025-09-13 09:46:18.526 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:18.527 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361908161181,EndPoint:-10.7606835565923
2025-09-13 09:46:18.546 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:18
2025-09-13 09:46:18.600 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:18
2025-09-13 09:46:19.729 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:85
2025-09-13 09:46:19.729 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:19.729 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:19.730 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:85
2025-09-13 09:46:19.730 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:19.731 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:B_SourceLightType
2025-09-13 09:46:19.731 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:A_SourceLightType
2025-09-13 09:46:19.731 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,B_SourceLightType
2025-09-13 09:46:19.731 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,A_SourceLightType
2025-09-13 09:46:19.780 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:19.782 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_85_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:19.832 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:19.834 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_85_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:19.995 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;85/209,
2025-09-13 09:46:20.004 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:20.059 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:20.399 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 86
2025-09-13 09:46:20.399 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 86
2025-09-13 09:46:20.399 [Thd =94]  Info Default  开始扫描条带； [86/209]
2025-09-13 09:46:20.401 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:20.404 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:0.75383, CaptureEndX:-12.39938, CaptureEndY:0.75383, VectorBeginX:14.66317, VectorBeginY:0.75383, VectorEndX:-16.35595, VectorEndY:0.75383, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:20.404 [Thd =20]  Info Default ***row:86, vectorBeginX:14.663, vectorBeginY:0.754, captureBeginX:11.097, captureBeginY:0.754, captureEndX:-12.399, captureEndY:0.754, vectorEndX:-16.356, vectorEndY:0.754
2025-09-13 09:46:20.404 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:20.405 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974955976465,EndPoint:12.3993787750639
2025-09-13 09:46:20.911 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:20
2025-09-13 09:46:20.977 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:20
2025-09-13 09:46:21.606 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:86
2025-09-13 09:46:21.606 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:21.606 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:21.607 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:86
2025-09-13 09:46:21.607 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:21.607 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:A_SourceLightType
2025-09-13 09:46:21.607 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,A_SourceLightType
2025-09-13 09:46:21.607 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,B_SourceLightType
2025-09-13 09:46:21.607 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:B_SourceLightType
2025-09-13 09:46:21.670 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:21.673 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_86_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:21.727 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:21.728 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_86_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:21.875 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;86/209,
2025-09-13 09:46:21.895 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:22.113 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:22.463 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 87
2025-09-13 09:46:22.463 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 87
2025-09-13 09:46:22.463 [Thd =94]  Info Default  开始扫描条带； [87/209]
2025-09-13 09:46:22.466 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:22.469 [Thd =20]  Info Default ***row:87, vectorBeginX:-16.356, vectorBeginY:0.326, captureBeginX:-12.736, captureBeginY:0.326, captureEndX:10.761, captureEndY:0.326, vectorEndX:14.663, vectorEndY:0.326
2025-09-13 09:46:22.469 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:22.470 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361925861376,EndPoint:-10.7606817865728
2025-09-13 09:46:22.632 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:22
2025-09-13 09:46:22.683 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:22
2025-09-13 09:46:23.678 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:87
2025-09-13 09:46:23.679 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:23.679 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:23.683 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:87
2025-09-13 09:46:23.684 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:23.684 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:A_SourceLightType
2025-09-13 09:46:23.684 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:B_SourceLightType
2025-09-13 09:46:23.684 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,A_SourceLightType
2025-09-13 09:46:23.684 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,B_SourceLightType
2025-09-13 09:46:23.771 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:23.774 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_87_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:23.827 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:23.829 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_87_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:23.942 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;87/209,
2025-09-13 09:46:23.951 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:24.217 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:24.566 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 88
2025-09-13 09:46:24.566 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 88
2025-09-13 09:46:24.566 [Thd =54]  Info Default  开始扫描条带； [88/209]
2025-09-13 09:46:24.568 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:24.571 [Thd =20]  Info Default CaptureBeginX: 11.09749, CaptureBeginY:-0.10126, CaptureEndX:-12.39938, CaptureEndY:-0.10126, VectorBeginX:14.66317, VectorBeginY:-0.10126, VectorEndX:-16.35595, VectorEndY:-0.10126, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:24.571 [Thd =20]  Info Default ***row:88, vectorBeginX:14.663, vectorBeginY:-0.101, captureBeginX:11.097, captureBeginY:-0.101, captureEndX:-12.399, captureEndY:-0.101, vectorEndX:-16.356, vectorEndY:-0.101
2025-09-13 09:46:24.571 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:24.572 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974946210619,EndPoint:12.3993797516485
2025-09-13 09:46:25.774 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:88
2025-09-13 09:46:25.774 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:25.774 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:25.778 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:88
2025-09-13 09:46:25.778 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:25.778 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:A_SourceLightType
2025-09-13 09:46:25.778 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:B_SourceLightType
2025-09-13 09:46:25.778 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,A_SourceLightType
2025-09-13 09:46:25.778 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,B_SourceLightType
2025-09-13 09:46:25.841 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:25.843 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_88_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:25.896 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:25.899 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_88_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:26.046 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;88/209,
2025-09-13 09:46:26.056 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:26.099 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:26.450 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 89
2025-09-13 09:46:26.450 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 89
2025-09-13 09:46:26.450 [Thd =77]  Info Default  开始扫描条带； [89/209]
2025-09-13 09:46:26.452 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:26.455 [Thd =20]  Info Default ***row:89, vectorBeginX:-16.356, vectorBeginY:-0.529, captureBeginX:-12.736, captureBeginY:-0.529, captureEndX:10.761, captureEndY:-0.529, vectorEndX:14.663, vectorEndY:-0.529
2025-09-13 09:46:26.455 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:26.456 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361897174853,EndPoint:-10.7606846552252
2025-09-13 09:46:26.691 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:26
2025-09-13 09:46:26.712 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:26
2025-09-13 09:46:27.659 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:89
2025-09-13 09:46:27.659 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:27.659 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:27.659 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:89
2025-09-13 09:46:27.660 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:27.660 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:A_SourceLightType
2025-09-13 09:46:27.660 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:B_SourceLightType
2025-09-13 09:46:27.660 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,A_SourceLightType
2025-09-13 09:46:27.660 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,B_SourceLightType
2025-09-13 09:46:27.706 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:27.708 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_89_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:27.768 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:27.771 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_89_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:27.928 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;89/209,
2025-09-13 09:46:27.937 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:27.986 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:28.338 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 90
2025-09-13 09:46:28.338 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 90
2025-09-13 09:46:28.338 [Thd =156]  Info Default  开始扫描条带； [90/209]
2025-09-13 09:46:28.340 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:28.343 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-0.95635, CaptureEndX:-12.39937, CaptureEndY:-0.95635, VectorBeginX:14.66318, VectorBeginY:-0.95635, VectorEndX:-16.35594, VectorEndY:-0.95635, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:28.343 [Thd =20]  Info Default ***row:90, vectorBeginX:14.663, vectorBeginY:-0.956, captureBeginX:11.097, captureBeginY:-0.956, captureEndX:-12.399, captureEndY:-0.956, vectorEndX:-16.356, vectorEndY:-0.956
2025-09-13 09:46:28.343 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:28.344 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974996870157,EndPoint:12.3993746856947
2025-09-13 09:46:28.719 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:28
2025-09-13 09:46:28.765 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:28
2025-09-13 09:46:29.543 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:90
2025-09-13 09:46:29.543 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:29.543 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:29.545 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:90
2025-09-13 09:46:29.545 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:29.545 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:A_SourceLightType
2025-09-13 09:46:29.545 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:B_SourceLightType
2025-09-13 09:46:29.545 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,A_SourceLightType
2025-09-13 09:46:29.545 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,B_SourceLightType
2025-09-13 09:46:29.594 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:29.596 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_90_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:29.649 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:29.650 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_90_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:29.815 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;90/209,
2025-09-13 09:46:29.824 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:29.877 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:30.227 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 91
2025-09-13 09:46:30.227 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 91
2025-09-13 09:46:30.227 [Thd =54]  Info Default  开始扫描条带； [91/209]
2025-09-13 09:46:30.229 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:30.231 [Thd =20]  Info Default ***row:91, vectorBeginX:-16.356, vectorBeginY:-1.384, captureBeginX:-12.736, captureBeginY:-1.384, captureEndX:10.761, captureEndY:-1.384, vectorEndX:14.663, vectorEndY:-1.384
2025-09-13 09:46:30.231 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:30.233 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361823932665,EndPoint:-10.7606919794439
2025-09-13 09:46:30.771 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:30
2025-09-13 09:46:30.793 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:30
2025-09-13 09:46:31.435 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:91
2025-09-13 09:46:31.435 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:31.435 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:31.436 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:91
2025-09-13 09:46:31.436 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:31.436 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:A_SourceLightType
2025-09-13 09:46:31.436 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:B_SourceLightType
2025-09-13 09:46:31.436 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,A_SourceLightType
2025-09-13 09:46:31.436 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,B_SourceLightType
2025-09-13 09:46:31.486 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:31.488 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_91_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:31.538 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:31.540 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_91_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:31.702 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;91/209,
2025-09-13 09:46:31.710 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:31.750 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:32.100 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 92
2025-09-13 09:46:32.100 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 92
2025-09-13 09:46:32.100 [Thd =50]  Info Default  开始扫描条带； [92/209]
2025-09-13 09:46:32.102 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:32.109 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-1.81145, CaptureEndX:-12.39937, CaptureEndY:-1.81145, VectorBeginX:14.66318, VectorBeginY:-1.81145, VectorEndX:-16.35593, VectorEndY:-1.81145, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:32.109 [Thd =20]  Info Default ***row:92, vectorBeginX:14.663, vectorBeginY:-1.811, captureBeginX:11.098, captureBeginY:-1.811, captureEndX:-12.399, captureEndY:-1.811, vectorEndX:-16.356, vectorEndY:-1.811
2025-09-13 09:46:32.109 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:32.110 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975074385721,EndPoint:12.3993669341383
2025-09-13 09:46:33.063 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:33
2025-09-13 09:46:33.118 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:33
2025-09-13 09:46:33.309 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:92
2025-09-13 09:46:33.309 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:33.309 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:33.310 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:92
2025-09-13 09:46:33.310 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:33.310 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:A_SourceLightType
2025-09-13 09:46:33.310 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:B_SourceLightType
2025-09-13 09:46:33.310 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,A_SourceLightType
2025-09-13 09:46:33.310 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,B_SourceLightType
2025-09-13 09:46:33.357 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:33.359 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_92_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:33.405 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:33.407 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_92_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:33.577 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;92/209,
2025-09-13 09:46:33.586 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:33.627 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:33.977 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 93
2025-09-13 09:46:33.977 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 93
2025-09-13 09:46:33.977 [Thd =54]  Info Default  开始扫描条带； [93/209]
2025-09-13 09:46:33.979 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:33.982 [Thd =20]  Info Default ***row:93, vectorBeginX:-16.356, vectorBeginY:-2.239, captureBeginX:-12.736, captureBeginY:-2.239, captureEndX:10.761, captureEndY:-2.239, vectorEndX:14.663, vectorEndY:-2.239
2025-09-13 09:46:33.982 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:33.982 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361758625048,EndPoint:-10.7606985102056
2025-09-13 09:46:34.808 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:34
2025-09-13 09:46:34.833 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:34
2025-09-13 09:46:35.184 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:93
2025-09-13 09:46:35.184 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:35.184 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:35.185 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:93
2025-09-13 09:46:35.185 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:35.185 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:A_SourceLightType
2025-09-13 09:46:35.185 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:B_SourceLightType
2025-09-13 09:46:35.185 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,A_SourceLightType
2025-09-13 09:46:35.185 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,B_SourceLightType
2025-09-13 09:46:35.232 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:35.233 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_93_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:35.282 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:35.284 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_93_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:35.448 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;93/209,
2025-09-13 09:46:35.457 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:35.497 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:35.848 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 94
2025-09-13 09:46:35.848 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 94
2025-09-13 09:46:35.848 [Thd =172]  Info Default  开始扫描条带； [94/209]
2025-09-13 09:46:35.851 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:35.855 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-2.66654, CaptureEndX:-12.39936, CaptureEndY:-2.66654, VectorBeginX:14.66319, VectorBeginY:-2.66654, VectorEndX:-16.35593, VectorEndY:-2.66654, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:35.855 [Thd =20]  Info Default ***row:94, vectorBeginX:14.663, vectorBeginY:-2.667, captureBeginX:11.098, captureBeginY:-2.667, captureEndX:-12.399, captureEndY:-2.667, vectorEndX:-16.356, vectorEndY:-2.667
2025-09-13 09:46:35.855 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:35.856 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097514152521,EndPoint:12.3993602201894
2025-09-13 09:46:37.057 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:94
2025-09-13 09:46:37.057 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:37.057 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:37.059 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:94
2025-09-13 09:46:37.059 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:37.059 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:A_SourceLightType
2025-09-13 09:46:37.059 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:B_SourceLightType
2025-09-13 09:46:37.059 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,A_SourceLightType
2025-09-13 09:46:37.059 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,B_SourceLightType
2025-09-13 09:46:37.107 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:37.109 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_94_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:37.157 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:37.159 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_94_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:37.224 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:37
2025-09-13 09:46:37.241 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:37
2025-09-13 09:46:37.323 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;94/209,
2025-09-13 09:46:37.332 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:37.403 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:37.754 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 95
2025-09-13 09:46:37.754 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 95
2025-09-13 09:46:37.754 [Thd =172]  Info Default  开始扫描条带； [95/209]
2025-09-13 09:46:37.756 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:37.758 [Thd =20]  Info Default ***row:95, vectorBeginX:-16.356, vectorBeginY:-3.094, captureBeginX:-12.736, captureBeginY:-3.094, captureEndX:10.761, captureEndY:-3.094, vectorEndX:14.663, vectorEndY:-3.094
2025-09-13 09:46:37.759 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:37.760 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361753742235,EndPoint:-10.7606989984869
2025-09-13 09:46:38.242 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:38
2025-09-13 09:46:38.270 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:38
2025-09-13 09:46:38.967 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:95
2025-09-13 09:46:38.968 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:38.968 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:38.969 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:95
2025-09-13 09:46:38.969 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:38.969 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:B_SourceLightType
2025-09-13 09:46:38.969 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:A_SourceLightType
2025-09-13 09:46:38.969 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,B_SourceLightType
2025-09-13 09:46:38.969 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,A_SourceLightType
2025-09-13 09:46:39.017 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:39.020 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_95_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:39.072 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:39.074 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_95_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:39.233 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;95/209,
2025-09-13 09:46:39.242 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:39.280 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:39.632 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 96
2025-09-13 09:46:39.632 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 96
2025-09-13 09:46:39.647 [Thd =86]  Info Default  开始扫描条带； [96/209]
2025-09-13 09:46:39.650 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:39.652 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-3.52163, CaptureEndX:-12.39936, CaptureEndY:-3.52163, VectorBeginX:14.66319, VectorBeginY:-3.52163, VectorEndX:-16.35593, VectorEndY:-3.52163, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:39.652 [Thd =20]  Info Default ***row:96, vectorBeginX:14.663, vectorBeginY:-3.522, captureBeginX:11.098, captureBeginY:-3.522, captureEndX:-12.399, captureEndY:-3.522, vectorEndX:-16.356, vectorEndY:-3.522
2025-09-13 09:46:39.652 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:39.654 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097512565613,EndPoint:12.3993618070974
2025-09-13 09:46:40.853 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:96
2025-09-13 09:46:40.853 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:40.853 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:40.854 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:96
2025-09-13 09:46:40.854 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:40.854 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:A_SourceLightType
2025-09-13 09:46:40.854 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,A_SourceLightType
2025-09-13 09:46:40.854 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,B_SourceLightType
2025-09-13 09:46:40.854 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:B_SourceLightType
2025-09-13 09:46:40.903 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:40.904 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_96_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:40.952 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:40.957 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_96_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:41.123 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;96/209,
2025-09-13 09:46:41.132 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:41.176 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:41.524 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 97
2025-09-13 09:46:41.524 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 97
2025-09-13 09:46:41.524 [Thd =65]  Info Default  开始扫描条带； [97/209]
2025-09-13 09:46:41.526 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:41.529 [Thd =20]  Info Default ***row:97, vectorBeginX:-16.356, vectorBeginY:-3.949, captureBeginX:-12.736, captureBeginY:-3.949, captureEndX:10.761, captureEndY:-3.949, vectorEndX:14.663, vectorEndY:-3.949
2025-09-13 09:46:41.529 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:41.530 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361752521532,EndPoint:-10.7606991205572
2025-09-13 09:46:41.531 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:41
2025-09-13 09:46:41.559 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:41
2025-09-13 09:46:42.060 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:42
2025-09-13 09:46:42.078 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:42
2025-09-13 09:46:42.732 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:97
2025-09-13 09:46:42.732 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:42.732 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:42.733 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:97
2025-09-13 09:46:42.733 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:42.733 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:A_SourceLightType
2025-09-13 09:46:42.733 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:B_SourceLightType
2025-09-13 09:46:42.733 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,A_SourceLightType
2025-09-13 09:46:42.733 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,B_SourceLightType
2025-09-13 09:46:42.782 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:42.784 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_97_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:42.833 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:42.835 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_97_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:42.995 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;97/209,
2025-09-13 09:46:43.005 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:43.112 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:43.462 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 98
2025-09-13 09:46:43.462 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 98
2025-09-13 09:46:43.462 [Thd =124]  Info Default  开始扫描条带； [98/209]
2025-09-13 09:46:43.464 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:43.467 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-4.37672, CaptureEndX:-12.39936, CaptureEndY:-4.37672, VectorBeginX:14.66319, VectorBeginY:-4.37672, VectorEndX:-16.35593, VectorEndY:-4.37672, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:43.467 [Thd =20]  Info Default ***row:98, vectorBeginX:14.663, vectorBeginY:-4.377, captureBeginX:11.098, captureBeginY:-4.377, captureEndX:-12.399, captureEndY:-4.377, vectorEndX:-16.356, vectorEndY:-4.377
2025-09-13 09:46:43.467 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:43.468 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975104293841,EndPoint:12.3993639433263
2025-09-13 09:46:43.928 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:43
2025-09-13 09:46:43.944 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:43
2025-09-13 09:46:44.666 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:98
2025-09-13 09:46:44.666 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:44.666 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:44.668 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:98
2025-09-13 09:46:44.668 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:44.668 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:A_SourceLightType
2025-09-13 09:46:44.668 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:B_SourceLightType
2025-09-13 09:46:44.668 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,A_SourceLightType
2025-09-13 09:46:44.668 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,B_SourceLightType
2025-09-13 09:46:44.714 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:44.716 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_98_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:44.764 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:44.769 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_98_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:44.933 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;98/209,
2025-09-13 09:46:44.942 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:45.011 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:45.360 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 99
2025-09-13 09:46:45.360 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 99
2025-09-13 09:46:45.360 [Thd =156]  Info Default  开始扫描条带； [99/209]
2025-09-13 09:46:45.362 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:45.365 [Thd =20]  Info Default ***row:99, vectorBeginX:-16.356, vectorBeginY:-4.804, captureBeginX:-12.736, captureBeginY:-4.804, captureEndX:10.761, captureEndY:-4.804, vectorEndX:14.663, vectorEndY:-4.804
2025-09-13 09:46:45.365 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:45.366 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736177510454,EndPoint:-10.7606968622564
2025-09-13 09:46:45.948 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:45
2025-09-13 09:46:45.972 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:45
2025-09-13 09:46:46.568 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:99
2025-09-13 09:46:46.568 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:46.568 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:46.570 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:99
2025-09-13 09:46:46.570 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:46.570 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:A_SourceLightType
2025-09-13 09:46:46.570 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:B_SourceLightType
2025-09-13 09:46:46.570 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,A_SourceLightType
2025-09-13 09:46:46.570 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,B_SourceLightType
2025-09-13 09:46:46.618 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:46.620 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_99_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:46.671 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:46.673 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_99_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:46.836 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;99/209,
2025-09-13 09:46:46.845 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:46.987 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:47.338 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 100
2025-09-13 09:46:47.338 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 100
2025-09-13 09:46:47.338 [Thd =68]  Info Default  开始扫描条带； [100/209]
2025-09-13 09:46:47.340 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:47.343 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-5.23182, CaptureEndX:-12.39936, CaptureEndY:-5.23182, VectorBeginX:14.66319, VectorBeginY:-5.23182, VectorEndX:-16.35593, VectorEndY:-5.23182, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:47.343 [Thd =20]  Info Default ***row:100, vectorBeginX:14.663, vectorBeginY:-5.232, captureBeginX:11.098, captureBeginY:-5.232, captureEndX:-12.399, captureEndY:-5.232, vectorEndX:-16.356, vectorEndY:-5.232
2025-09-13 09:46:47.343 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:47.344 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097509696934,EndPoint:12.3993646757764
2025-09-13 09:46:47.476 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:47
2025-09-13 09:46:47.499 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:47
2025-09-13 09:46:48.555 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:100
2025-09-13 09:46:48.555 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:48.555 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:48.558 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:100
2025-09-13 09:46:48.558 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:48.558 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:A_SourceLightType
2025-09-13 09:46:48.558 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:B_SourceLightType
2025-09-13 09:46:48.558 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,A_SourceLightType
2025-09-13 09:46:48.558 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,B_SourceLightType
2025-09-13 09:46:48.607 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:48.609 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_100_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:48.663 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:48.664 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_100_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:48.817 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;100/209,
2025-09-13 09:46:48.826 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:48.924 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:49.275 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 101
2025-09-13 09:46:49.275 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 101
2025-09-13 09:46:49.275 [Thd =65]  Info Default  开始扫描条带； [101/209]
2025-09-13 09:46:49.277 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:49.279 [Thd =20]  Info Default ***row:101, vectorBeginX:-16.356, vectorBeginY:-5.659, captureBeginX:-12.736, captureBeginY:-5.659, captureEndX:10.761, captureEndY:-5.659, vectorEndX:14.663, vectorEndY:-5.659
2025-09-13 09:46:49.279 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:49.280 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361756183642,EndPoint:-10.7606987543462
2025-09-13 09:46:49.505 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:49
2025-09-13 09:46:49.522 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:49
2025-09-13 09:46:50.484 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:101
2025-09-13 09:46:50.484 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:50.484 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:50.485 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:101
2025-09-13 09:46:50.485 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:50.485 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:B_SourceLightType
2025-09-13 09:46:50.485 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:A_SourceLightType
2025-09-13 09:46:50.485 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,B_SourceLightType
2025-09-13 09:46:50.485 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,A_SourceLightType
2025-09-13 09:46:50.544 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:50.546 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_101_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:50.602 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:50.604 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_101_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:50.748 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;101/209,
2025-09-13 09:46:50.757 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:50.871 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:51.222 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 102
2025-09-13 09:46:51.222 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 102
2025-09-13 09:46:51.222 [Thd =94]  Info Default  开始扫描条带； [102/209]
2025-09-13 09:46:51.226 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:51.229 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-6.08691, CaptureEndX:-12.39936, CaptureEndY:-6.08691, VectorBeginX:14.66319, VectorBeginY:-6.08691, VectorEndX:-16.35593, VectorEndY:-6.08691, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:51.230 [Thd =20]  Info Default ***row:102, vectorBeginX:14.663, vectorBeginY:-6.087, captureBeginX:11.098, captureBeginY:-6.087, captureEndX:-12.399, captureEndY:-6.087, vectorEndX:-16.356, vectorEndY:-6.087
2025-09-13 09:46:51.230 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:51.231 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975140914889,EndPoint:12.3993602812215
2025-09-13 09:46:51.528 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:51
2025-09-13 09:46:51.566 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:51
2025-09-13 09:46:52.432 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:102
2025-09-13 09:46:52.433 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:52.433 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:52.434 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:102
2025-09-13 09:46:52.434 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:52.434 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:B_SourceLightType
2025-09-13 09:46:52.434 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:A_SourceLightType
2025-09-13 09:46:52.434 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,B_SourceLightType
2025-09-13 09:46:52.434 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,A_SourceLightType
2025-09-13 09:46:52.489 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:52.491 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_102_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:52.547 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:52.549 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_102_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:52.699 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;102/209,
2025-09-13 09:46:52.708 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:52.907 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:53.260 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 103
2025-09-13 09:46:53.260 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 103
2025-09-13 09:46:53.260 [Thd =50]  Info Default  开始扫描条带； [103/209]
2025-09-13 09:46:53.264 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:53.267 [Thd =20]  Info Default ***row:103, vectorBeginX:-16.356, vectorBeginY:-6.514, captureBeginX:-12.736, captureBeginY:-6.514, captureEndX:10.761, captureEndY:-6.514, vectorEndX:14.663, vectorEndY:-6.514
2025-09-13 09:46:53.267 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:53.268 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361754962938,EndPoint:-10.7606988764166
2025-09-13 09:46:53.356 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:53
2025-09-13 09:46:53.406 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:53
2025-09-13 09:46:53.533 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:53
2025-09-13 09:46:53.575 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:53
2025-09-13 09:46:54.480 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:103
2025-09-13 09:46:54.481 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:54.481 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:54.481 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:103
2025-09-13 09:46:54.481 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:54.481 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:B_SourceLightType
2025-09-13 09:46:54.481 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:A_SourceLightType
2025-09-13 09:46:54.481 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,B_SourceLightType
2025-09-13 09:46:54.481 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,A_SourceLightType
2025-09-13 09:46:54.532 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:54.534 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_103_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:54.583 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:54.585 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_103_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:54.737 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;103/209,
2025-09-13 09:46:54.830 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:54.915 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:54
2025-09-13 09:46:55.024 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:55.072 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:55
2025-09-13 09:46:55.374 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 104
2025-09-13 09:46:55.374 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 104
2025-09-13 09:46:55.374 [Thd =138]  Info Default  开始扫描条带； [104/209]
2025-09-13 09:46:55.376 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:55.379 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-6.94201, CaptureEndX:-12.39936, CaptureEndY:-6.94201, VectorBeginX:14.66319, VectorBeginY:-6.94201, VectorEndX:-16.35593, VectorEndY:-6.94201, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:55.379 [Thd =20]  Info Default ***row:104, vectorBeginX:14.663, vectorBeginY:-6.942, captureBeginX:11.098, captureBeginY:-6.942, captureEndX:-12.399, captureEndY:-6.942, vectorEndX:-16.356, vectorEndY:-6.942
2025-09-13 09:46:55.379 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:55.380 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975128707873,EndPoint:12.3993615019231
2025-09-13 09:46:56.580 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:104
2025-09-13 09:46:56.580 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:56.580 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:56.580 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:104
2025-09-13 09:46:56.581 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:56.581 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:A_SourceLightType
2025-09-13 09:46:56.581 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:B_SourceLightType
2025-09-13 09:46:56.581 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,A_SourceLightType
2025-09-13 09:46:56.581 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,B_SourceLightType
2025-09-13 09:46:56.630 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:56.633 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_104_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:56.684 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:56.686 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_104_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:56.845 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;104/209,
2025-09-13 09:46:56.854 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:56.905 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:57.078 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:46:57
2025-09-13 09:46:57.201 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:46:57
2025-09-13 09:46:57.253 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 105
2025-09-13 09:46:57.253 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 105
2025-09-13 09:46:57.253 [Thd =156]  Info Default  开始扫描条带； [105/209]
2025-09-13 09:46:57.255 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:46:57.258 [Thd =20]  Info Default ***row:105, vectorBeginX:-16.356, vectorBeginY:-7.370, captureBeginX:-12.736, captureBeginY:-7.370, captureEndX:10.761, captureEndY:-7.370, vectorEndX:14.663, vectorEndY:-7.370
2025-09-13 09:46:57.258 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:57.259 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361754962938,EndPoint:-10.7606988764166
2025-09-13 09:46:58.461 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:105
2025-09-13 09:46:58.461 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:58.462 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:46:58.463 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:105
2025-09-13 09:46:58.463 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:46:58.463 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:B_SourceLightType
2025-09-13 09:46:58.463 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:A_SourceLightType
2025-09-13 09:46:58.463 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,B_SourceLightType
2025-09-13 09:46:58.463 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,A_SourceLightType
2025-09-13 09:46:58.511 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:46:58.512 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_105_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:58.563 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:46:58.565 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_105_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:46:58.725 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;105/209,
2025-09-13 09:46:58.734 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:46:58.776 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:46:59.126 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 106
2025-09-13 09:46:59.126 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 106
2025-09-13 09:46:59.126 [Thd =172]  Info Default  开始扫描条带； [106/209]
2025-09-13 09:46:59.128 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:46:59.130 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-7.79711, CaptureEndX:-12.39936, CaptureEndY:-7.79711, VectorBeginX:14.66319, VectorBeginY:-7.79711, VectorEndX:-16.35593, VectorEndY:-7.79711, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:46:59.130 [Thd =20]  Info Default ***row:106, vectorBeginX:14.663, vectorBeginY:-7.797, captureBeginX:11.098, captureBeginY:-7.797, captureEndX:-12.399, captureEndY:-7.797, vectorEndX:-16.356, vectorEndY:-7.797
2025-09-13 09:46:59.130 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:46:59.131 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097514335631,EndPoint:12.3993600370794
2025-09-13 09:47:00.331 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:106
2025-09-13 09:47:00.331 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:00.331 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:00.332 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:106
2025-09-13 09:47:00.332 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:00.332 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:A_SourceLightType
2025-09-13 09:47:00.332 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,A_SourceLightType
2025-09-13 09:47:00.333 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,B_SourceLightType
2025-09-13 09:47:00.333 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:B_SourceLightType
2025-09-13 09:47:00.379 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:00.380 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_106_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:00.437 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:00.439 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_106_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:00.604 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;106/209,
2025-09-13 09:47:00.613 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:00.665 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:01.016 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 107
2025-09-13 09:47:01.016 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 107
2025-09-13 09:47:01.016 [Thd =156]  Info Default  开始扫描条带； [107/209]
2025-09-13 09:47:01.018 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:01.021 [Thd =20]  Info Default ***row:107, vectorBeginX:-16.356, vectorBeginY:-8.225, captureBeginX:-12.736, captureBeginY:-8.225, captureEndX:10.761, captureEndY:-8.225, vectorEndX:14.663, vectorEndY:-8.225
2025-09-13 09:47:01.021 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:01.022 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361769001024,EndPoint:-10.760697472608
2025-09-13 09:47:01.717 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:01
2025-09-13 09:47:01.743 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:01
2025-09-13 09:47:01.744 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:01
2025-09-13 09:47:01.760 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:01
2025-09-13 09:47:02.224 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:107
2025-09-13 09:47:02.224 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:02.224 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:02.225 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:107
2025-09-13 09:47:02.225 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:02.225 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:B_SourceLightType
2025-09-13 09:47:02.225 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:A_SourceLightType
2025-09-13 09:47:02.225 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,B_SourceLightType
2025-09-13 09:47:02.225 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,A_SourceLightType
2025-09-13 09:47:02.274 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:02.276 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_107_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:02.324 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:02.326 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_107_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:02.488 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;107/209,
2025-09-13 09:47:02.497 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:02.547 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:02.896 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 108
2025-09-13 09:47:02.896 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 108
2025-09-13 09:47:02.896 [Thd =143]  Info Default  开始扫描条带； [108/209]
2025-09-13 09:47:02.900 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:02.903 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-8.65221, CaptureEndX:-12.39937, CaptureEndY:-8.65221, VectorBeginX:14.66318, VectorBeginY:-8.65221, VectorEndX:-16.35594, VectorEndY:-8.65221, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:02.903 [Thd =20]  Info Default ***row:108, vectorBeginX:14.663, vectorBeginY:-8.652, captureBeginX:11.098, captureBeginY:-8.652, captureEndX:-12.399, captureEndY:-8.652, vectorEndX:-16.356, vectorEndY:-8.652
2025-09-13 09:47:02.903 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:02.904 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975067672541,EndPoint:12.3993676054563
2025-09-13 09:47:04.104 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:108
2025-09-13 09:47:04.104 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:04.104 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:04.105 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:108
2025-09-13 09:47:04.105 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:04.105 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:A_SourceLightType
2025-09-13 09:47:04.115 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:B_SourceLightType
2025-09-13 09:47:04.115 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,A_SourceLightType
2025-09-13 09:47:04.115 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,B_SourceLightType
2025-09-13 09:47:04.165 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:04.166 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_108_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:04.216 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:04.218 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_108_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:04.371 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;108/209,
2025-09-13 09:47:04.380 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:04.476 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:04.830 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 109
2025-09-13 09:47:04.830 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 109
2025-09-13 09:47:04.830 [Thd =77]  Info Default  开始扫描条带； [109/209]
2025-09-13 09:47:04.833 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:04.835 [Thd =20]  Info Default ***row:109, vectorBeginX:-16.356, vectorBeginY:-9.080, captureBeginX:-12.736, captureBeginY:-9.080, captureEndX:10.761, captureEndY:-9.080, vectorEndX:14.663, vectorEndY:-9.080
2025-09-13 09:47:04.835 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:04.836 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361745197313,EndPoint:-10.7606998529791
2025-09-13 09:47:05.271 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:05
2025-09-13 09:47:05.323 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:05
2025-09-13 09:47:05.323 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:05
2025-09-13 09:47:05.368 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:05
2025-09-13 09:47:06.039 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:109
2025-09-13 09:47:06.039 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:06.039 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:06.040 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:109
2025-09-13 09:47:06.040 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:06.040 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:B_SourceLightType
2025-09-13 09:47:06.040 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:A_SourceLightType
2025-09-13 09:47:06.040 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,B_SourceLightType
2025-09-13 09:47:06.040 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,A_SourceLightType
2025-09-13 09:47:06.087 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:06.089 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_109_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:06.139 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:06.142 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_109_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:06.301 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;109/209,
2025-09-13 09:47:06.310 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:06.354 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:06.703 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 110
2025-09-13 09:47:06.703 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 110
2025-09-13 09:47:06.703 [Thd =158]  Info Default  开始扫描条带； [110/209]
2025-09-13 09:47:06.705 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:06.708 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-9.50730, CaptureEndX:-12.39936, CaptureEndY:-9.50730, VectorBeginX:14.66319, VectorBeginY:-9.50730, VectorEndX:-16.35593, VectorEndY:-9.50730, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:06.708 [Thd =20]  Info Default ***row:110, vectorBeginX:14.663, vectorBeginY:-9.507, captureBeginX:11.098, captureBeginY:-9.507, captureEndX:-12.399, captureEndY:-9.507, vectorEndX:-16.356, vectorEndY:-9.507
2025-09-13 09:47:06.708 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:06.709 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975129318346,EndPoint:12.3993614408758
2025-09-13 09:47:07.908 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:110
2025-09-13 09:47:07.908 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:07.908 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:07.910 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:110
2025-09-13 09:47:07.910 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:07.910 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:A_SourceLightType
2025-09-13 09:47:07.910 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:B_SourceLightType
2025-09-13 09:47:07.910 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,A_SourceLightType
2025-09-13 09:47:07.910 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,B_SourceLightType
2025-09-13 09:47:07.957 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:07.959 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_110_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:08.006 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:08.007 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_110_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:08.174 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;110/209,
2025-09-13 09:47:08.183 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:08.332 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:08.666 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:08
2025-09-13 09:47:08.682 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:08
2025-09-13 09:47:08.683 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 111
2025-09-13 09:47:08.683 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 111
2025-09-13 09:47:08.683 [Thd =94]  Info Default  开始扫描条带； [111/209]
2025-09-13 09:47:08.685 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:08.687 [Thd =20]  Info Default ***row:111, vectorBeginX:-16.356, vectorBeginY:-9.935, captureBeginX:-12.736, captureBeginY:-9.935, captureEndX:10.761, captureEndY:-9.935, vectorEndX:14.663, vectorEndY:-9.935
2025-09-13 09:47:08.687 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:08.688 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361748859423,EndPoint:-10.7606994867681
2025-09-13 09:47:09.183 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:09
2025-09-13 09:47:09.234 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:09
2025-09-13 09:47:09.890 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:111
2025-09-13 09:47:09.890 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:09.890 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:09.891 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:111
2025-09-13 09:47:09.891 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:09.891 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:B_SourceLightType
2025-09-13 09:47:09.891 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,B_SourceLightType
2025-09-13 09:47:09.891 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,A_SourceLightType
2025-09-13 09:47:09.891 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:A_SourceLightType
2025-09-13 09:47:09.939 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:09.941 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_111_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:09.987 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:09.988 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_111_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:10.163 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;111/209,
2025-09-13 09:47:10.173 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:10.222 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:10.570 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 112
2025-09-13 09:47:10.570 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 112
2025-09-13 09:47:10.570 [Thd =54]  Info Default  开始扫描条带； [112/209]
2025-09-13 09:47:10.572 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:10.574 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-10.36240, CaptureEndX:-12.39936, CaptureEndY:-10.36240, VectorBeginX:14.66319, VectorBeginY:-10.36240, VectorEndX:-16.35593, VectorEndY:-10.36240, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:10.574 [Thd =20]  Info Default ***row:112, vectorBeginX:14.663, vectorBeginY:-10.362, captureBeginX:11.098, captureBeginY:-10.362, captureEndX:-12.399, captureEndY:-10.362, vectorEndX:-16.356, vectorEndY:-10.362
2025-09-13 09:47:10.575 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:10.575 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975118331972,EndPoint:12.3993625395132
2025-09-13 09:47:11.774 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:112
2025-09-13 09:47:11.774 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:11.775 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:11.776 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:112
2025-09-13 09:47:11.776 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:11.776 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:B_SourceLightType
2025-09-13 09:47:11.776 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:A_SourceLightType
2025-09-13 09:47:11.776 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,B_SourceLightType
2025-09-13 09:47:11.776 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,A_SourceLightType
2025-09-13 09:47:11.823 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:11.825 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_112_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:11.869 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:11.871 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_112_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:12.050 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;112/209,
2025-09-13 09:47:12.059 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:12.229 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:12.579 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 113
2025-09-13 09:47:12.579 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 113
2025-09-13 09:47:12.579 [Thd =158]  Info Default  开始扫描条带； [113/209]
2025-09-13 09:47:12.581 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:12.583 [Thd =20]  Info Default ***row:113, vectorBeginX:-16.356, vectorBeginY:-10.790, captureBeginX:-12.736, captureBeginY:-10.790, captureEndX:10.761, captureEndY:-10.790, vectorEndX:14.663, vectorEndY:-10.790
2025-09-13 09:47:12.583 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:12.584 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361739704149,EndPoint:-10.7607004022955
2025-09-13 09:47:13.106 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:13
2025-09-13 09:47:13.132 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:13
2025-09-13 09:47:13.237 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:13
2025-09-13 09:47:13.290 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:13
2025-09-13 09:47:13.787 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:113
2025-09-13 09:47:13.787 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:13.787 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:13.788 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:113
2025-09-13 09:47:13.788 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:13.788 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:B_SourceLightType
2025-09-13 09:47:13.788 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:A_SourceLightType
2025-09-13 09:47:13.788 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,B_SourceLightType
2025-09-13 09:47:13.788 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,A_SourceLightType
2025-09-13 09:47:13.834 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:13.836 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_113_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:13.885 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:13.887 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_113_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:14.049 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;113/209,
2025-09-13 09:47:14.058 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:14.102 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:14.452 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 114
2025-09-13 09:47:14.452 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 114
2025-09-13 09:47:14.452 [Thd =195]  Info Default  开始扫描条带； [114/209]
2025-09-13 09:47:14.454 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:14.457 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:-11.21749, CaptureEndX:-12.39936, CaptureEndY:-11.21749, VectorBeginX:14.66319, VectorBeginY:-11.21749, VectorEndX:-16.35593, VectorEndY:-11.21749, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:14.457 [Thd =20]  Info Default ***row:114, vectorBeginX:14.663, vectorBeginY:-11.217, captureBeginX:11.098, captureBeginY:-11.217, captureEndX:-12.399, captureEndY:-11.217, vectorEndX:-16.356, vectorEndY:-11.217
2025-09-13 09:47:14.457 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:14.458 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975155563532,EndPoint:12.3993588163572
2025-09-13 09:47:15.671 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:114
2025-09-13 09:47:15.678 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:15.678 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:15.679 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:114
2025-09-13 09:47:15.679 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:15.679 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:A_SourceLightType
2025-09-13 09:47:15.679 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:B_SourceLightType
2025-09-13 09:47:15.679 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,A_SourceLightType
2025-09-13 09:47:15.679 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,B_SourceLightType
2025-09-13 09:47:15.735 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:15.737 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_114_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:15.801 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:15.803 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_114_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:15.931 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;114/209,
2025-09-13 09:47:15.940 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:16.180 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:16.237 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:16
2025-09-13 09:47:16.285 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:16
2025-09-13 09:47:16.530 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 115
2025-09-13 09:47:16.530 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 115
2025-09-13 09:47:16.530 [Thd =94]  Info Default  开始扫描条带； [115/209]
2025-09-13 09:47:16.532 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:16.535 [Thd =20]  Info Default ***row:115, vectorBeginX:-16.356, vectorBeginY:-11.645, captureBeginX:-12.736, captureBeginY:-11.645, captureEndX:10.761, captureEndY:-11.645, vectorEndX:14.663, vectorEndY:-11.645
2025-09-13 09:47:16.535 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:16.536 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361714679735,EndPoint:-10.7607029047369
2025-09-13 09:47:16.787 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:16
2025-09-13 09:47:16.819 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:16
2025-09-13 09:47:17.738 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:115
2025-09-13 09:47:17.738 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:17.738 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:17.739 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:115
2025-09-13 09:47:17.739 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:17.739 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:B_SourceLightType
2025-09-13 09:47:17.739 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:A_SourceLightType
2025-09-13 09:47:17.739 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,B_SourceLightType
2025-09-13 09:47:17.739 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,A_SourceLightType
2025-09-13 09:47:17.787 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:17.788 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_115_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:17.838 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:17.839 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_115_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:18.004 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;115/209,
2025-09-13 09:47:18.013 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:18.122 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:18.470 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 116
2025-09-13 09:47:18.470 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 116
2025-09-13 09:47:18.470 [Thd =151]  Info Default  开始扫描条带； [116/209]
2025-09-13 09:47:18.472 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:18.475 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-12.07259, CaptureEndX:-12.39936, CaptureEndY:-12.07259, VectorBeginX:14.66319, VectorBeginY:-12.07259, VectorEndX:-16.35593, VectorEndY:-12.07259, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:18.475 [Thd =20]  Info Default ***row:116, vectorBeginX:14.663, vectorBeginY:-12.073, captureBeginX:11.098, captureBeginY:-12.073, captureEndX:-12.399, captureEndY:-12.073, vectorEndX:-16.356, vectorEndY:-12.073
2025-09-13 09:47:18.475 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:18.476 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975128708376,EndPoint:12.3993615018728
2025-09-13 09:47:19.676 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:116
2025-09-13 09:47:19.676 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:19.676 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:19.677 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:116
2025-09-13 09:47:19.677 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:19.677 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:B_SourceLightType
2025-09-13 09:47:19.677 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:A_SourceLightType
2025-09-13 09:47:19.677 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,B_SourceLightType
2025-09-13 09:47:19.677 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,A_SourceLightType
2025-09-13 09:47:19.737 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:19.739 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_116_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:19.789 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:19.790 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_116_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:19.942 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;116/209,
2025-09-13 09:47:19.951 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:20.003 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:20.353 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 117
2025-09-13 09:47:20.353 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 117
2025-09-13 09:47:20.353 [Thd =66]  Info Default  开始扫描条带； [117/209]
2025-09-13 09:47:20.355 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:20.358 [Thd =20]  Info Default ***row:117, vectorBeginX:-16.356, vectorBeginY:-12.500, captureBeginX:-12.736, captureBeginY:-12.500, captureEndX:10.761, captureEndY:-12.500, vectorEndX:14.663, vectorEndY:-12.500
2025-09-13 09:47:20.358 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:20.359 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361759845751,EndPoint:-10.7606983881353
2025-09-13 09:47:20.371 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:20
2025-09-13 09:47:20.421 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:20
2025-09-13 09:47:20.923 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:20
2025-09-13 09:47:20.946 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:20
2025-09-13 09:47:21.569 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:117
2025-09-13 09:47:21.569 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:21.569 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:21.577 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:117
2025-09-13 09:47:21.577 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:21.577 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:A_SourceLightType
2025-09-13 09:47:21.577 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,A_SourceLightType
2025-09-13 09:47:21.577 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,B_SourceLightType
2025-09-13 09:47:21.577 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:B_SourceLightType
2025-09-13 09:47:21.626 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:21.628 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_117_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:21.679 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:21.681 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_117_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:21.833 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;117/209,
2025-09-13 09:47:21.842 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:21.906 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:21.949 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:21
2025-09-13 09:47:22.003 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:22
2025-09-13 09:47:22.256 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 118
2025-09-13 09:47:22.256 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 118
2025-09-13 09:47:22.256 [Thd =124]  Info Default  开始扫描条带； [118/209]
2025-09-13 09:47:22.258 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:22.261 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-12.92769, CaptureEndX:-12.39937, CaptureEndY:-12.92769, VectorBeginX:14.66319, VectorBeginY:-12.92769, VectorEndX:-16.35593, VectorEndY:-12.92769, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:22.261 [Thd =20]  Info Default ***row:118, vectorBeginX:14.663, vectorBeginY:-12.928, captureBeginX:11.098, captureBeginY:-12.928, captureEndX:-12.399, captureEndY:-12.928, vectorEndX:-16.356, vectorEndY:-12.928
2025-09-13 09:47:22.261 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:22.262 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975091476366,EndPoint:12.3993652250738
2025-09-13 09:47:23.462 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:118
2025-09-13 09:47:23.462 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:23.462 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:23.463 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:118
2025-09-13 09:47:23.463 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:23.463 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:B_SourceLightType
2025-09-13 09:47:23.463 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:A_SourceLightType
2025-09-13 09:47:23.463 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,B_SourceLightType
2025-09-13 09:47:23.463 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,A_SourceLightType
2025-09-13 09:47:23.511 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:23.513 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_118_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:23.561 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:23.563 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_118_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:23.729 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;118/209,
2025-09-13 09:47:23.738 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:23.789 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:24.130 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 119
2025-09-13 09:47:24.130 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 119
2025-09-13 09:47:24.130 [Thd =94]  Info Default  开始扫描条带； [119/209]
2025-09-13 09:47:24.132 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:24.134 [Thd =20]  Info Default ***row:119, vectorBeginX:-16.356, vectorBeginY:-13.355, captureBeginX:-12.736, captureBeginY:-13.355, captureEndX:10.761, captureEndY:-13.355, vectorEndX:14.663, vectorEndY:-13.355
2025-09-13 09:47:24.134 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:24.136 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361784870165,EndPoint:-10.7606958856939
2025-09-13 09:47:25.336 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:119
2025-09-13 09:47:25.336 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:25.336 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:25.337 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:119
2025-09-13 09:47:25.337 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:25.337 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:B_SourceLightType
2025-09-13 09:47:25.337 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:A_SourceLightType
2025-09-13 09:47:25.338 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,B_SourceLightType
2025-09-13 09:47:25.338 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,A_SourceLightType
2025-09-13 09:47:25.388 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:25.389 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_119_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:25.439 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:25.441 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_119_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:25.600 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;119/209,
2025-09-13 09:47:25.609 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:25.652 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:26.003 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 120
2025-09-13 09:47:26.003 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 120
2025-09-13 09:47:26.003 [Thd =65]  Info Default  开始扫描条带； [120/209]
2025-09-13 09:47:26.005 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:26.008 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-13.78279, CaptureEndX:-12.39937, CaptureEndY:-13.78279, VectorBeginX:14.66318, VectorBeginY:-13.78279, VectorEndX:-16.35594, VectorEndY:-13.78279, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:26.008 [Thd =20]  Info Default ***row:120, vectorBeginX:14.663, vectorBeginY:-13.783, captureBeginX:11.098, captureBeginY:-13.783, captureEndX:-12.399, captureEndY:-13.783, vectorEndX:-16.356, vectorEndY:-13.783
2025-09-13 09:47:26.008 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:26.009 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975062179178,EndPoint:12.3993681547926
2025-09-13 09:47:26.437 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:26
2025-09-13 09:47:26.494 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:26
2025-09-13 09:47:26.496 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:26
2025-09-13 09:47:26.597 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:26
2025-09-13 09:47:27.209 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:120
2025-09-13 09:47:27.209 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:120,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:27.209 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:27.212 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:120
2025-09-13 09:47:27.212 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:120,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:27.212 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:120,source_light_Type:B_SourceLightType
2025-09-13 09:47:27.212 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:120,source_light_Type:A_SourceLightType
2025-09-13 09:47:27.212 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：120,B_SourceLightType
2025-09-13 09:47:27.212 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：120,A_SourceLightType
2025-09-13 09:47:27.268 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:27.270 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":120,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_120_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:27.318 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:27.320 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":120,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_120_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:27.475 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;120/209,
2025-09-13 09:47:27.484 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:27.552 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:27.902 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 121
2025-09-13 09:47:27.902 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 121
2025-09-13 09:47:27.902 [Thd =156]  Info Default  开始扫描条带； [121/209]
2025-09-13 09:47:27.904 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:27.906 [Thd =20]  Info Default ***row:121, vectorBeginX:-16.356, vectorBeginY:-14.210, captureBeginX:-12.736, captureBeginY:-14.210, captureEndX:10.761, captureEndY:-14.210, vectorEndX:14.663, vectorEndY:-14.210
2025-09-13 09:47:27.906 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:27.908 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361798908251,EndPoint:-10.7606944818853
2025-09-13 09:47:29.115 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:121
2025-09-13 09:47:29.115 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:121,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:29.115 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:29.118 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:121
2025-09-13 09:47:29.118 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:121,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:29.118 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:121,source_light_Type:B_SourceLightType
2025-09-13 09:47:29.118 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:121,source_light_Type:A_SourceLightType
2025-09-13 09:47:29.118 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：121,B_SourceLightType
2025-09-13 09:47:29.118 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：121,A_SourceLightType
2025-09-13 09:47:29.169 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:29.172 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":121,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_121_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:29.220 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:29.221 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":121,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_121_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:29.288 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:29
2025-09-13 09:47:29.336 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:29
2025-09-13 09:47:29.380 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;121/209,
2025-09-13 09:47:29.389 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:29.524 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:29.838 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:29
2025-09-13 09:47:29.873 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 122
2025-09-13 09:47:29.873 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 122
2025-09-13 09:47:29.873 [Thd =124]  Info Default  开始扫描条带； [122/209]
2025-09-13 09:47:29.875 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:29.878 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-14.63789, CaptureEndX:-12.39937, CaptureEndY:-14.63789, VectorBeginX:14.66319, VectorBeginY:-14.63789, VectorEndX:-16.35593, VectorEndY:-14.63789, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:29.878 [Thd =20]  Info Default ***row:122, vectorBeginX:14.663, vectorBeginY:-14.638, captureBeginX:11.098, captureBeginY:-14.638, captureEndX:-12.399, captureEndY:-14.638, vectorEndX:-16.356, vectorEndY:-14.638
2025-09-13 09:47:29.878 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:29
2025-09-13 09:47:29.878 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:29.880 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975090255175,EndPoint:12.3993653471929
2025-09-13 09:47:31.080 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:122
2025-09-13 09:47:31.080 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:122,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:31.080 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:31.081 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:122
2025-09-13 09:47:31.081 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:122,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:31.081 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:122,source_light_Type:A_SourceLightType
2025-09-13 09:47:31.081 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：122,A_SourceLightType
2025-09-13 09:47:31.081 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：122,B_SourceLightType
2025-09-13 09:47:31.081 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:122,source_light_Type:B_SourceLightType
2025-09-13 09:47:31.126 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:31.128 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":122,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_122_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:31.180 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:31.181 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":122,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_122_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:31.351 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;122/209,
2025-09-13 09:47:31.359 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:31.389 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:31
2025-09-13 09:47:31.403 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:31.421 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:31
2025-09-13 09:47:31.751 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 123
2025-09-13 09:47:31.751 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 123
2025-09-13 09:47:31.751 [Thd =195]  Info Default  开始扫描条带； [123/209]
2025-09-13 09:47:31.753 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:31.756 [Thd =20]  Info Default ***row:123, vectorBeginX:-16.356, vectorBeginY:-15.065, captureBeginX:-12.736, captureBeginY:-15.065, captureEndX:10.761, captureEndY:-15.065, vectorEndX:14.663, vectorEndY:-15.065
2025-09-13 09:47:31.756 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:31.757 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361769611376,EndPoint:-10.7606974115728
2025-09-13 09:47:32.957 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:123
2025-09-13 09:47:32.958 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:123,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:32.958 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:32.959 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:123
2025-09-13 09:47:32.959 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:123,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:32.959 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:123,source_light_Type:A_SourceLightType
2025-09-13 09:47:32.959 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：123,A_SourceLightType
2025-09-13 09:47:32.959 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:123,source_light_Type:B_SourceLightType
2025-09-13 09:47:32.960 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：123,B_SourceLightType
2025-09-13 09:47:33.007 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:33.009 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":123,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_123_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:33.060 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:33.061 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":123,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_123_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:33.227 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;123/209,
2025-09-13 09:47:33.236 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:33.284 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:33.633 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 124
2025-09-13 09:47:33.633 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 124
2025-09-13 09:47:33.633 [Thd =124]  Info Default  开始扫描条带； [124/209]
2025-09-13 09:47:33.635 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:33.638 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-15.49298, CaptureEndX:-12.39936, CaptureEndY:-15.49298, VectorBeginX:14.66319, VectorBeginY:-15.49298, VectorEndX:-16.35593, VectorEndY:-15.49298, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:33.638 [Thd =20]  Info Default ***row:124, vectorBeginX:14.663, vectorBeginY:-15.493, captureBeginX:11.098, captureBeginY:-15.493, captureEndX:-12.399, captureEndY:-15.493, vectorEndX:-16.356, vectorEndY:-15.493
2025-09-13 09:47:33.638 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:33.639 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975132369799,EndPoint:12.3993611357305
2025-09-13 09:47:34.841 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:124
2025-09-13 09:47:34.841 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:124,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:34.841 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:34.847 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:124
2025-09-13 09:47:34.847 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:124,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:34.847 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:124,source_light_Type:B_SourceLightType
2025-09-13 09:47:34.848 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:124,source_light_Type:A_SourceLightType
2025-09-13 09:47:34.848 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：124,B_SourceLightType
2025-09-13 09:47:34.848 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：124,A_SourceLightType
2025-09-13 09:47:34.894 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:34.896 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":124,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_124_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:34.946 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:34.948 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":124,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_124_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:35.113 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;124/209,
2025-09-13 09:47:35.122 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:35.246 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:35.595 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 125
2025-09-13 09:47:35.595 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 125
2025-09-13 09:47:35.595 [Thd =156]  Info Default  开始扫描条带； [125/209]
2025-09-13 09:47:35.597 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:35.599 [Thd =20]  Info Default ***row:125, vectorBeginX:-16.356, vectorBeginY:-15.921, captureBeginX:-12.736, captureBeginY:-15.921, captureEndX:10.761, captureEndY:-15.921, vectorEndX:14.663, vectorEndY:-15.921
2025-09-13 09:47:35.600 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:35.601 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361721393603,EndPoint:-10.7607022333501
2025-09-13 09:47:35.933 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:35
2025-09-13 09:47:35.951 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:35
2025-09-13 09:47:36.803 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:125
2025-09-13 09:47:36.803 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:125
2025-09-13 09:47:36.803 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:125,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:36.803 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:36.804 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:125,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:36.804 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:125,source_light_Type:B_SourceLightType
2025-09-13 09:47:36.804 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:125,source_light_Type:A_SourceLightType
2025-09-13 09:47:36.804 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：125,B_SourceLightType
2025-09-13 09:47:36.804 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：125,A_SourceLightType
2025-09-13 09:47:36.851 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:36.853 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":125,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_125_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:36.903 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:36.904 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":125,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_125_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:37.070 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;125/209,
2025-09-13 09:47:37.079 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:37.119 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:37.458 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 126
2025-09-13 09:47:37.458 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 126
2025-09-13 09:47:37.458 [Thd =156]  Info Default  开始扫描条带； [126/209]
2025-09-13 09:47:37.460 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:37.463 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:-16.34808, CaptureEndX:-12.39935, CaptureEndY:-16.34808, VectorBeginX:14.66320, VectorBeginY:-16.34808, VectorEndX:-16.35592, VectorEndY:-16.34808, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:37.463 [Thd =20]  Info Default ***row:126, vectorBeginX:14.663, vectorBeginY:-16.348, captureBeginX:11.098, captureBeginY:-16.348, captureEndX:-12.399, captureEndY:-16.348, vectorEndX:-16.356, vectorEndY:-16.348
2025-09-13 09:47:37.463 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:37.464 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975206833292,EndPoint:12.3993536893812
2025-09-13 09:47:37.956 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:37
2025-09-13 09:47:37.974 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:37
2025-09-13 09:47:38.664 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:126
2025-09-13 09:47:38.665 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:126,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:38.665 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:38.665 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:126
2025-09-13 09:47:38.665 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:126,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:38.665 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:126,source_light_Type:A_SourceLightType
2025-09-13 09:47:38.666 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：126,A_SourceLightType
2025-09-13 09:47:38.666 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：126,B_SourceLightType
2025-09-13 09:47:38.666 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:126,source_light_Type:B_SourceLightType
2025-09-13 09:47:38.713 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:38.715 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":126,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_126_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:38.763 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:38.764 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":126,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_126_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:38.815 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:38
2025-09-13 09:47:38.876 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:38
2025-09-13 09:47:38.936 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;126/209,
2025-09-13 09:47:38.945 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:39.085 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:39.436 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 127
2025-09-13 09:47:39.436 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 127
2025-09-13 09:47:39.436 [Thd =176]  Info Default  开始扫描条带； [127/209]
2025-09-13 09:47:39.439 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:39.441 [Thd =20]  Info Default ***row:127, vectorBeginX:-16.356, vectorBeginY:-16.776, captureBeginX:-12.736, captureBeginY:-16.776, captureEndX:10.761, captureEndY:-16.776, vectorEndX:14.663, vectorEndY:-16.776
2025-09-13 09:47:39.441 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:39.442 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361663410204,EndPoint:-10.76070803169
2025-09-13 09:47:40.588 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:40
2025-09-13 09:47:40.644 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:127
2025-09-13 09:47:40.648 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:127,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:40.648 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:40.648 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:127
2025-09-13 09:47:40.648 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:127,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:40.648 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:127,source_light_Type:A_SourceLightType
2025-09-13 09:47:40.648 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:127,source_light_Type:B_SourceLightType
2025-09-13 09:47:40.649 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：127,A_SourceLightType
2025-09-13 09:47:40.649 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：127,B_SourceLightType
2025-09-13 09:47:40.671 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:40
2025-09-13 09:47:40.698 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:40.699 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":127,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_127_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:40.747 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:40.748 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":127,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_127_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:40.914 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;127/209,
2025-09-13 09:47:40.924 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:40.966 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:41.314 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 128
2025-09-13 09:47:41.314 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 128
2025-09-13 09:47:41.314 [Thd =158]  Info Default  开始扫描条带； [128/209]
2025-09-13 09:47:41.317 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:41.319 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:-17.20318, CaptureEndX:-12.39936, CaptureEndY:-17.20318, VectorBeginX:14.66320, VectorBeginY:-17.20318, VectorEndX:-16.35592, VectorEndY:-17.20318, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:41.319 [Thd =20]  Info Default ***row:128, vectorBeginX:14.663, vectorBeginY:-17.203, captureBeginX:11.098, captureBeginY:-17.203, captureEndX:-12.399, captureEndY:-17.203, vectorEndX:-16.356, vectorEndY:-17.203
2025-09-13 09:47:41.319 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:41.320 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975187302767,EndPoint:12.3993556424337
2025-09-13 09:47:42.520 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:128
2025-09-13 09:47:42.521 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:128,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:42.521 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:42.521 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:128
2025-09-13 09:47:42.522 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:128,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:42.522 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:128,source_light_Type:A_SourceLightType
2025-09-13 09:47:42.522 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：128,A_SourceLightType
2025-09-13 09:47:42.522 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：128,B_SourceLightType
2025-09-13 09:47:42.522 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:128,source_light_Type:B_SourceLightType
2025-09-13 09:47:42.573 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:42.575 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":128,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_128_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:42.626 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:42.628 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":128,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_128_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:42.790 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;128/209,
2025-09-13 09:47:42.799 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:42.838 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:43.188 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 129
2025-09-13 09:47:43.188 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 129
2025-09-13 09:47:43.188 [Thd =65]  Info Default  开始扫描条带； [129/209]
2025-09-13 09:47:43.190 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:43.193 [Thd =20]  Info Default ***row:129, vectorBeginX:-16.356, vectorBeginY:-17.631, captureBeginX:-12.736, captureBeginY:-17.631, captureEndX:10.761, captureEndY:-17.631, vectorEndX:14.663, vectorEndY:-17.631
2025-09-13 09:47:43.193 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:43.194 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361655475634,EndPoint:-10.760708825147
2025-09-13 09:47:43.506 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:43
2025-09-13 09:47:43.526 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:43
2025-09-13 09:47:44.395 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:129
2025-09-13 09:47:44.396 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:129,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:44.396 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:44.397 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:129
2025-09-13 09:47:44.397 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:129,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:44.397 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:129,source_light_Type:A_SourceLightType
2025-09-13 09:47:44.397 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:129,source_light_Type:B_SourceLightType
2025-09-13 09:47:44.397 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：129,A_SourceLightType
2025-09-13 09:47:44.397 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：129,B_SourceLightType
2025-09-13 09:47:44.445 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:44.446 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":129,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_129_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:44.493 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:44.495 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":129,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_129_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:44.667 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;129/209,
2025-09-13 09:47:44.679 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:44.779 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:45.127 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 130
2025-09-13 09:47:45.127 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 130
2025-09-13 09:47:45.127 [Thd =124]  Info Default  开始扫描条带； [130/209]
2025-09-13 09:47:45.129 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:45.132 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:-18.05828, CaptureEndX:-12.39935, CaptureEndY:-18.05828, VectorBeginX:14.66320, VectorBeginY:-18.05828, VectorEndX:-16.35592, VectorEndY:-18.05828, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:45.132 [Thd =20]  Info Default ***row:130, vectorBeginX:14.663, vectorBeginY:-18.058, captureBeginX:11.098, captureBeginY:-18.058, captureEndX:-12.399, captureEndY:-18.058, vectorEndX:-16.356, vectorEndY:-18.058
2025-09-13 09:47:45.132 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:45.133 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975195237436,EndPoint:12.3993548489668
2025-09-13 09:47:45.662 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:45
2025-09-13 09:47:45.687 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:45
2025-09-13 09:47:46.333 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:130
2025-09-13 09:47:46.351 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:130,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:46.351 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:46.351 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:130
2025-09-13 09:47:46.351 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:130,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:46.351 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:130,source_light_Type:A_SourceLightType
2025-09-13 09:47:46.351 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:130,source_light_Type:B_SourceLightType
2025-09-13 09:47:46.351 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：130,A_SourceLightType
2025-09-13 09:47:46.351 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：130,B_SourceLightType
2025-09-13 09:47:46.398 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:46.400 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":130,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_130_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:46.452 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:46.453 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":130,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_130_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:46.606 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;130/209,
2025-09-13 09:47:46.615 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:46.664 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:47.011 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 131
2025-09-13 09:47:47.011 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 131
2025-09-13 09:47:47.011 [Thd =77]  Info Default  开始扫描条带； [131/209]
2025-09-13 09:47:47.013 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:47.016 [Thd =20]  Info Default ***row:131, vectorBeginX:-16.356, vectorBeginY:-18.486, captureBeginX:-12.736, captureBeginY:-18.486, captureEndX:10.761, captureEndY:-18.486, vectorEndX:14.663, vectorEndY:-18.486
2025-09-13 09:47:47.016 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:47.017 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361653034227,EndPoint:-10.7607090692877
2025-09-13 09:47:47.685 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:47
2025-09-13 09:47:47.743 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:47
2025-09-13 09:47:48.220 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:131
2025-09-13 09:47:48.220 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:131,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:48.220 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:48.221 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:131
2025-09-13 09:47:48.221 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:131,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:48.221 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:131,source_light_Type:A_SourceLightType
2025-09-13 09:47:48.221 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：131,A_SourceLightType
2025-09-13 09:47:48.221 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：131,B_SourceLightType
2025-09-13 09:47:48.221 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:131,source_light_Type:B_SourceLightType
2025-09-13 09:47:48.268 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:48.270 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":131,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_131_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:48.316 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:48.319 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":131,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_131_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:48.492 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;131/209,
2025-09-13 09:47:48.501 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:48.543 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:48.891 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 132
2025-09-13 09:47:48.891 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 132
2025-09-13 09:47:48.891 [Thd =54]  Info Default  开始扫描条带； [132/209]
2025-09-13 09:47:48.893 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:48.896 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:-18.91338, CaptureEndX:-12.39935, CaptureEndY:-18.91338, VectorBeginX:14.66320, VectorBeginY:-18.91338, VectorEndX:-16.35592, VectorEndY:-18.91338, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:48.896 [Thd =20]  Info Default ***row:132, vectorBeginX:14.663, vectorBeginY:-18.913, captureBeginX:11.098, captureBeginY:-18.913, captureEndX:-12.399, captureEndY:-18.913, vectorEndX:-16.356, vectorEndY:-18.913
2025-09-13 09:47:48.896 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:48.897 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097520439274,EndPoint:12.3993539334364
2025-09-13 09:47:49.348 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:49
2025-09-13 09:47:49.372 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:49
2025-09-13 09:47:50.096 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:132
2025-09-13 09:47:50.096 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:132,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:50.096 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:50.098 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:132
2025-09-13 09:47:50.098 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:132,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:50.098 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:132,source_light_Type:B_SourceLightType
2025-09-13 09:47:50.098 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:132,source_light_Type:A_SourceLightType
2025-09-13 09:47:50.098 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：132,B_SourceLightType
2025-09-13 09:47:50.098 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：132,A_SourceLightType
2025-09-13 09:47:50.147 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:50.149 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":132,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_132_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:50.197 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:50.199 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":132,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_132_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:50.369 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;132/209,
2025-09-13 09:47:50.378 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:50.430 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:50.772 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 133
2025-09-13 09:47:50.772 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 133
2025-09-13 09:47:50.772 [Thd =172]  Info Default  开始扫描条带； [133/209]
2025-09-13 09:47:50.775 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:50.777 [Thd =20]  Info Default ***row:133, vectorBeginX:-16.356, vectorBeginY:-19.341, captureBeginX:-12.736, captureBeginY:-19.341, captureEndX:10.761, captureEndY:-19.341, vectorEndX:14.663, vectorEndY:-19.341
2025-09-13 09:47:50.777 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:50.779 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361698200243,EndPoint:-10.7607045526861
2025-09-13 09:47:50.998 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:50
2025-09-13 09:47:51.017 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:51
2025-09-13 09:47:51.980 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:133
2025-09-13 09:47:51.980 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:133,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:51.980 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:51.981 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:133
2025-09-13 09:47:51.981 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:133,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:51.981 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:133,source_light_Type:A_SourceLightType
2025-09-13 09:47:51.981 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:133,source_light_Type:B_SourceLightType
2025-09-13 09:47:51.981 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：133,A_SourceLightType
2025-09-13 09:47:51.981 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：133,B_SourceLightType
2025-09-13 09:47:52.027 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:52.030 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":133,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_133_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:52.079 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:52.081 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":133,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_133_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:52.244 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;133/209,
2025-09-13 09:47:52.253 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:52.333 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:52.524 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:52
2025-09-13 09:47:52.543 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:52
2025-09-13 09:47:52.681 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 134
2025-09-13 09:47:52.681 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 134
2025-09-13 09:47:52.681 [Thd =151]  Info Default  开始扫描条带； [134/209]
2025-09-13 09:47:52.683 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:52.685 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-19.76848, CaptureEndX:-12.39936, CaptureEndY:-19.76848, VectorBeginX:14.66319, VectorBeginY:-19.76848, VectorEndX:-16.35593, VectorEndY:-19.76848, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:52.685 [Thd =20]  Info Default ***row:134, vectorBeginX:14.663, vectorBeginY:-19.768, captureBeginX:11.098, captureBeginY:-19.768, captureEndX:-12.399, captureEndY:-19.768, vectorEndX:-16.356, vectorEndY:-19.768
2025-09-13 09:47:52.685 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:52.687 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975121384363,EndPoint:12.3993622342741
2025-09-13 09:47:53.546 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:53
2025-09-13 09:47:53.563 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:53
2025-09-13 09:47:53.886 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:134
2025-09-13 09:47:53.887 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:134,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:53.887 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:53.888 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:134
2025-09-13 09:47:53.888 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:134,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:53.888 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:134,source_light_Type:A_SourceLightType
2025-09-13 09:47:53.888 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:134,source_light_Type:B_SourceLightType
2025-09-13 09:47:53.888 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：134,A_SourceLightType
2025-09-13 09:47:53.888 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：134,B_SourceLightType
2025-09-13 09:47:53.932 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:53.935 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":134,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_134_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:53.982 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:53.984 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":134,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_134_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:54.157 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;134/209,
2025-09-13 09:47:54.166 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:54.209 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:54.559 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 135
2025-09-13 09:47:54.559 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 135
2025-09-13 09:47:54.559 [Thd =50]  Info Default  开始扫描条带； [135/209]
2025-09-13 09:47:54.562 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:54.564 [Thd =20]  Info Default ***row:135, vectorBeginX:-16.356, vectorBeginY:-20.196, captureBeginX:-12.736, captureBeginY:-20.196, captureEndX:10.761, captureEndY:-20.196, vectorEndX:14.663, vectorEndY:-20.196
2025-09-13 09:47:54.564 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:54.566 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361712238329,EndPoint:-10.7607031488775
2025-09-13 09:47:55.775 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:135
2025-09-13 09:47:55.775 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:135,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:55.775 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:55.781 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:135
2025-09-13 09:47:55.781 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:135,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:55.781 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:135,source_light_Type:A_SourceLightType
2025-09-13 09:47:55.781 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:135,source_light_Type:B_SourceLightType
2025-09-13 09:47:55.781 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：135,A_SourceLightType
2025-09-13 09:47:55.781 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：135,B_SourceLightType
2025-09-13 09:47:55.828 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:55.830 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":135,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_135_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:55.879 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:55.881 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":135,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_135_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:56.036 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;135/209,
2025-09-13 09:47:56.045 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:56.095 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:56.441 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 136
2025-09-13 09:47:56.441 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 136
2025-09-13 09:47:56.441 [Thd =66]  Info Default  开始扫描条带； [136/209]
2025-09-13 09:47:56.443 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:47:56.446 [Thd =20]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:-20.62358, CaptureEndX:-12.39936, CaptureEndY:-20.62358, VectorBeginX:14.66319, VectorBeginY:-20.62358, VectorEndX:-16.35593, VectorEndY:-20.62358, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:47:56.446 [Thd =20]  Info Default ***row:136, vectorBeginX:14.663, vectorBeginY:-20.624, captureBeginX:11.098, captureBeginY:-20.624, captureEndX:-12.399, captureEndY:-20.624, vectorEndX:-16.356, vectorEndY:-20.624
2025-09-13 09:47:56.448 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:56.449 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975164719149,EndPoint:12.3993579007955
2025-09-13 09:47:57.649 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:136
2025-09-13 09:47:57.650 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:136,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:57.650 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:57.651 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:136
2025-09-13 09:47:57.651 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:136,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:57.651 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:136,source_light_Type:A_SourceLightType
2025-09-13 09:47:57.651 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:136,source_light_Type:B_SourceLightType
2025-09-13 09:47:57.651 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：136,A_SourceLightType
2025-09-13 09:47:57.651 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：136,B_SourceLightType
2025-09-13 09:47:57.697 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:57.699 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":136,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_136_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:57.748 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:57.750 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":136,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_136_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:57.919 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;136/209,
2025-09-13 09:47:57.928 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:57.969 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:47:58.074 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:58
2025-09-13 09:47:58.106 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:58
2025-09-13 09:47:58.318 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 137
2025-09-13 09:47:58.318 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 137
2025-09-13 09:47:58.318 [Thd =138]  Info Default  开始扫描条带； [137/209]
2025-09-13 09:47:58.320 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:47:58.323 [Thd =20]  Info Default ***row:137, vectorBeginX:-16.356, vectorBeginY:-21.051, captureBeginX:-12.736, captureBeginY:-21.051, captureEndX:10.761, captureEndY:-21.051, vectorEndX:14.663, vectorEndY:-21.051
2025-09-13 09:47:58.323 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:47:58.326 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361714679735,EndPoint:-10.7607029047369
2025-09-13 09:47:58.608 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:47:58
2025-09-13 09:47:58.626 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:47:58
2025-09-13 09:47:59.528 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:137
2025-09-13 09:47:59.529 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:137,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:59.529 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:47:59.529 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:137
2025-09-13 09:47:59.530 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:137,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:47:59.530 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:137,source_light_Type:A_SourceLightType
2025-09-13 09:47:59.530 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:137,source_light_Type:B_SourceLightType
2025-09-13 09:47:59.530 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：137,A_SourceLightType
2025-09-13 09:47:59.530 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：137,B_SourceLightType
2025-09-13 09:47:59.577 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:47:59.579 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":137,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_137_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:59.628 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:47:59.630 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":137,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_137_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:47:59.798 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;137/209,
2025-09-13 09:47:59.807 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:47:59.940 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:00.279 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 138
2025-09-13 09:48:00.279 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 138
2025-09-13 09:48:00.279 [Thd =94]  Info Default  开始扫描条带； [138/209]
2025-09-13 09:48:00.281 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:00.284 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-21.47867, CaptureEndX:-12.39936, CaptureEndY:-21.47867, VectorBeginX:14.66319, VectorBeginY:-21.47867, VectorEndX:-16.35593, VectorEndY:-21.47867, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:00.284 [Thd =20]  Info Default ***row:138, vectorBeginX:14.663, vectorBeginY:-21.479, captureBeginX:11.098, captureBeginY:-21.479, captureEndX:-12.399, captureEndY:-21.479, vectorEndX:-16.356, vectorEndY:-21.479
2025-09-13 09:48:00.284 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:00.285 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097514579822,EndPoint:12.3993597928884
2025-09-13 09:48:01.488 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:138
2025-09-13 09:48:01.488 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:138,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:01.488 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:01.489 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:138
2025-09-13 09:48:01.489 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:138,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:01.489 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:138,source_light_Type:A_SourceLightType
2025-09-13 09:48:01.489 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:138,source_light_Type:B_SourceLightType
2025-09-13 09:48:01.489 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：138,A_SourceLightType
2025-09-13 09:48:01.489 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：138,B_SourceLightType
2025-09-13 09:48:01.535 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:01.537 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":138,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_138_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:01.588 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:01.590 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":138,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_138_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:01.759 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;138/209,
2025-09-13 09:48:01.769 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:01.809 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:01.969 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:01
2025-09-13 09:48:01.994 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:01
2025-09-13 09:48:02.158 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 139
2025-09-13 09:48:02.158 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 139
2025-09-13 09:48:02.158 [Thd =124]  Info Default  开始扫描条带； [139/209]
2025-09-13 09:48:02.160 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:02.162 [Thd =20]  Info Default ***row:139, vectorBeginX:-16.356, vectorBeginY:-21.906, captureBeginX:-12.736, captureBeginY:-21.906, captureEndX:10.761, captureEndY:-21.906, vectorEndX:14.663, vectorEndY:-21.906
2025-09-13 09:48:02.162 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:02.164 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736174763872,EndPoint:-10.7606996088384
2025-09-13 09:48:02.496 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:02
2025-09-13 09:48:02.514 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:02
2025-09-13 09:48:03.366 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:139
2025-09-13 09:48:03.366 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:139,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:03.366 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:03.367 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:139
2025-09-13 09:48:03.367 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:139,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:03.367 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:139,source_light_Type:A_SourceLightType
2025-09-13 09:48:03.367 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:139,source_light_Type:B_SourceLightType
2025-09-13 09:48:03.367 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：139,A_SourceLightType
2025-09-13 09:48:03.367 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：139,B_SourceLightType
2025-09-13 09:48:03.413 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:03.415 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":139,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_139_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:03.465 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:03.466 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":139,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_139_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:03.636 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;139/209,
2025-09-13 09:48:03.912 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:03.967 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:04.316 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 140
2025-09-13 09:48:04.316 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 140
2025-09-13 09:48:04.316 [Thd =89]  Info Default  开始扫描条带； [140/209]
2025-09-13 09:48:04.318 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:04.320 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-22.33377, CaptureEndX:-12.39937, CaptureEndY:-22.33377, VectorBeginX:14.66319, VectorBeginY:-22.33377, VectorEndX:-16.35593, VectorEndY:-22.33377, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:04.320 [Thd =20]  Info Default ***row:140, vectorBeginX:14.663, vectorBeginY:-22.334, captureBeginX:11.098, captureBeginY:-22.334, captureEndX:-12.399, captureEndY:-22.334, vectorEndX:-16.356, vectorEndY:-22.334
2025-09-13 09:48:04.320 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:04.322 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975084762652,EndPoint:12.3993658964452
2025-09-13 09:48:05.527 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:140
2025-09-13 09:48:05.527 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:140,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:05.527 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:05.528 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:140
2025-09-13 09:48:05.528 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:140,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:05.528 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:140,source_light_Type:A_SourceLightType
2025-09-13 09:48:05.528 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：140,A_SourceLightType
2025-09-13 09:48:05.528 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：140,B_SourceLightType
2025-09-13 09:48:05.528 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:140,source_light_Type:B_SourceLightType
2025-09-13 09:48:05.575 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:05.577 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":140,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_140_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:05.627 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:05.628 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":140,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_140_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:05.798 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;140/209,
2025-09-13 09:48:05.807 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:05.855 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:06.204 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:06
2025-09-13 09:48:06.206 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 141
2025-09-13 09:48:06.206 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 141
2025-09-13 09:48:06.206 [Thd =222]  Info Default  开始扫描条带； [141/209]
2025-09-13 09:48:06.209 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:06.211 [Thd =20]  Info Default ***row:141, vectorBeginX:-16.356, vectorBeginY:-22.761, captureBeginX:-12.736, captureBeginY:-22.761, captureEndX:10.761, captureEndY:-22.761, vectorEndX:14.663, vectorEndY:-22.761
2025-09-13 09:48:06.214 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:06.215 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736178670122,EndPoint:-10.7606957025884
2025-09-13 09:48:06.221 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:06
2025-09-13 09:48:06.727 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:06
2025-09-13 09:48:06.743 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:06
2025-09-13 09:48:07.419 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:141
2025-09-13 09:48:07.419 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:141,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:07.419 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:07.420 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:141
2025-09-13 09:48:07.420 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:141,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:07.420 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:141,source_light_Type:A_SourceLightType
2025-09-13 09:48:07.420 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:141,source_light_Type:B_SourceLightType
2025-09-13 09:48:07.420 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：141,A_SourceLightType
2025-09-13 09:48:07.420 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：141,B_SourceLightType
2025-09-13 09:48:07.468 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:07.470 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":141,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_141_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:07.519 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:07.520 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":141,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_141_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:07.684 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;141/209,
2025-09-13 09:48:07.693 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:07.739 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:08.089 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 142
2025-09-13 09:48:08.089 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 142
2025-09-13 09:48:08.089 [Thd =219]  Info Default  开始扫描条带； [142/209]
2025-09-13 09:48:08.092 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:08.094 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-23.18886, CaptureEndX:-12.39937, CaptureEndY:-23.18886, VectorBeginX:14.66318, VectorBeginY:-23.18886, VectorEndX:-16.35594, VectorEndY:-23.18886, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:08.094 [Thd =20]  Info Default ***row:142, vectorBeginX:14.663, vectorBeginY:-23.189, captureBeginX:11.098, captureBeginY:-23.189, captureEndX:-12.399, captureEndY:-23.189, vectorEndX:-16.356, vectorEndY:-23.189
2025-09-13 09:48:08.094 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:08.095 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975048751421,EndPoint:12.3993694975683
2025-09-13 09:48:09.294 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:142
2025-09-13 09:48:09.295 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:142,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:09.295 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:09.296 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:142
2025-09-13 09:48:09.296 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:142,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:09.296 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:142,source_light_Type:B_SourceLightType
2025-09-13 09:48:09.296 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:142,source_light_Type:A_SourceLightType
2025-09-13 09:48:09.296 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：142,B_SourceLightType
2025-09-13 09:48:09.296 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：142,A_SourceLightType
2025-09-13 09:48:09.345 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:09.346 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":142,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_142_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:09.393 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:09.394 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":142,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_142_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:09.564 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;142/209,
2025-09-13 09:48:09.573 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:09.624 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:09.973 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 143
2025-09-13 09:48:09.973 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 143
2025-09-13 09:48:09.973 [Thd =213]  Info Default  开始扫描条带； [143/209]
2025-09-13 09:48:09.975 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:09.978 [Thd =20]  Info Default ***row:143, vectorBeginX:-16.356, vectorBeginY:-23.616, captureBeginX:-12.736, captureBeginY:-23.616, captureEndX:10.761, captureEndY:-23.616, vectorEndX:14.663, vectorEndY:-23.616
2025-09-13 09:48:09.978 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:09.979 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361835529345,EndPoint:-10.7606908197759
2025-09-13 09:48:10.255 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:10
2025-09-13 09:48:10.275 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:10
2025-09-13 09:48:11.181 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:143
2025-09-13 09:48:11.184 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:143
2025-09-13 09:48:11.184 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:143,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:11.184 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:11.185 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:143,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:11.185 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:143,source_light_Type:B_SourceLightType
2025-09-13 09:48:11.185 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:143,source_light_Type:A_SourceLightType
2025-09-13 09:48:11.185 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：143,B_SourceLightType
2025-09-13 09:48:11.185 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：143,A_SourceLightType
2025-09-13 09:48:11.257 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:11.259 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":143,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_143_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:11.277 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:11
2025-09-13 09:48:11.297 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:11
2025-09-13 09:48:11.309 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:11.312 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":143,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_143_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:11.452 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;143/209,
2025-09-13 09:48:11.461 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:11.562 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:11.915 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 144
2025-09-13 09:48:11.915 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 144
2025-09-13 09:48:11.915 [Thd =89]  Info Default  开始扫描条带； [144/209]
2025-09-13 09:48:11.917 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:11.920 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-24.04396, CaptureEndX:-12.39937, CaptureEndY:-24.04396, VectorBeginX:14.66318, VectorBeginY:-24.04396, VectorEndX:-16.35594, VectorEndY:-24.04396, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:11.920 [Thd =20]  Info Default ***row:144, vectorBeginX:14.663, vectorBeginY:-24.044, captureBeginX:11.098, captureBeginY:-24.044, captureEndX:-12.399, captureEndY:-24.044, vectorEndX:-16.356, vectorEndY:-24.044
2025-09-13 09:48:11.920 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:11.921 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975030440264,EndPoint:12.399371328684
2025-09-13 09:48:12.245 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:12
2025-09-13 09:48:12.292 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:12
2025-09-13 09:48:13.121 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:144
2025-09-13 09:48:13.122 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:144,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:13.122 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:13.122 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:144
2025-09-13 09:48:13.123 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:144,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:13.123 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:144,source_light_Type:A_SourceLightType
2025-09-13 09:48:13.123 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:144,source_light_Type:B_SourceLightType
2025-09-13 09:48:13.123 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：144,A_SourceLightType
2025-09-13 09:48:13.123 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：144,B_SourceLightType
2025-09-13 09:48:13.173 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:13.175 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":144,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_144_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:13.224 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:13.227 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":144,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_144_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:13.392 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;144/209,
2025-09-13 09:48:13.401 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:13.449 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:13.798 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 145
2025-09-13 09:48:13.798 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 145
2025-09-13 09:48:13.798 [Thd =219]  Info Default  开始扫描条带； [145/209]
2025-09-13 09:48:13.801 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:13.803 [Thd =20]  Info Default ***row:145, vectorBeginX:-16.356, vectorBeginY:-24.472, captureBeginX:-12.736, captureBeginY:-24.472, captureEndX:10.761, captureEndY:-24.472, vectorEndX:14.663, vectorEndY:-24.472
2025-09-13 09:48:13.803 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:13.804 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361815998095,EndPoint:-10.7606927729009
2025-09-13 09:48:15.007 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:145
2025-09-13 09:48:15.007 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:145,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:15.007 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:15.007 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:145
2025-09-13 09:48:15.007 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:145,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:15.007 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:145,source_light_Type:B_SourceLightType
2025-09-13 09:48:15.007 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:145,source_light_Type:A_SourceLightType
2025-09-13 09:48:15.007 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：145,B_SourceLightType
2025-09-13 09:48:15.007 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：145,A_SourceLightType
2025-09-13 09:48:15.069 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:15.071 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":145,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_145_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:15.118 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:15.119 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":145,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_145_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:15.278 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;145/209,
2025-09-13 09:48:15.288 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:15.330 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:15.677 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 146
2025-09-13 09:48:15.677 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 146
2025-09-13 09:48:15.677 [Thd =206]  Info Default  开始扫描条带； [146/209]
2025-09-13 09:48:15.680 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:15.682 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-24.89906, CaptureEndX:-12.39936, CaptureEndY:-24.89906, VectorBeginX:14.66319, VectorBeginY:-24.89906, VectorEndX:-16.35593, VectorEndY:-24.89906, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:15.682 [Thd =20]  Info Default ***row:146, vectorBeginX:14.663, vectorBeginY:-24.899, captureBeginX:11.098, captureBeginY:-24.899, captureEndX:-12.399, captureEndY:-24.899, vectorEndX:-16.356, vectorEndY:-24.899
2025-09-13 09:48:15.682 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:15.684 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975106734453,EndPoint:12.3993636992651
2025-09-13 09:48:15.956 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:15
2025-09-13 09:48:16.007 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:16
2025-09-13 09:48:16.884 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:146
2025-09-13 09:48:16.884 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:146,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:16.884 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:16.885 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:146
2025-09-13 09:48:16.885 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:146,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:16.886 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:146,source_light_Type:B_SourceLightType
2025-09-13 09:48:16.886 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:146,source_light_Type:A_SourceLightType
2025-09-13 09:48:16.886 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：146,B_SourceLightType
2025-09-13 09:48:16.886 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：146,A_SourceLightType
2025-09-13 09:48:16.934 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:16.936 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":146,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_146_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:16.989 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:16.991 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":146,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_146_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:17.152 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;146/209,
2025-09-13 09:48:17.161 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:17.383 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:17.725 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 147
2025-09-13 09:48:17.725 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 147
2025-09-13 09:48:17.725 [Thd =19]  Info Default  开始扫描条带； [147/209]
2025-09-13 09:48:17.727 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:17.729 [Thd =20]  Info Default ***row:147, vectorBeginX:-16.356, vectorBeginY:-25.327, captureBeginX:-12.736, captureBeginY:-25.327, captureEndX:10.761, captureEndY:-25.327, vectorEndX:14.663, vectorEndY:-25.327
2025-09-13 09:48:17.729 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:17.730 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361809284228,EndPoint:-10.7606934442876
2025-09-13 09:48:17.791 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:17
2025-09-13 09:48:17.811 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:17
2025-09-13 09:48:18.312 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:18
2025-09-13 09:48:18.329 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:18
2025-09-13 09:48:18.932 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:147
2025-09-13 09:48:18.933 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:147,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:18.933 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:18.933 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:147
2025-09-13 09:48:18.933 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:147,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:18.933 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:147,source_light_Type:B_SourceLightType
2025-09-13 09:48:18.933 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:147,source_light_Type:A_SourceLightType
2025-09-13 09:48:18.933 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：147,B_SourceLightType
2025-09-13 09:48:18.934 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：147,A_SourceLightType
2025-09-13 09:48:18.985 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:18.987 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":147,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_147_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:19.037 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:19.039 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":147,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_147_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:19.202 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;147/209,
2025-09-13 09:48:19.211 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:19.345 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:19.696 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 148
2025-09-13 09:48:19.696 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 148
2025-09-13 09:48:19.696 [Thd =172]  Info Default  开始扫描条带； [148/209]
2025-09-13 09:48:19.698 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:19.700 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-25.75416, CaptureEndX:-12.39937, CaptureEndY:-25.75416, VectorBeginX:14.66318, VectorBeginY:-25.75416, VectorEndX:-16.35594, VectorEndY:-25.75416, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:19.700 [Thd =20]  Info Default ***row:148, vectorBeginX:14.663, vectorBeginY:-25.754, captureBeginX:11.098, captureBeginY:-25.754, captureEndX:-12.399, captureEndY:-25.754, vectorEndX:-16.356, vectorEndY:-25.754
2025-09-13 09:48:19.700 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:19.702 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975028609537,EndPoint:12.3993715117567
2025-09-13 09:48:19.949 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:19
2025-09-13 09:48:20.004 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:20
2025-09-13 09:48:20.902 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:148
2025-09-13 09:48:20.902 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:148,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:20.902 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:20.903 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:148
2025-09-13 09:48:20.903 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:148,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:20.903 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:148,source_light_Type:A_SourceLightType
2025-09-13 09:48:20.903 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:148,source_light_Type:B_SourceLightType
2025-09-13 09:48:20.903 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：148,A_SourceLightType
2025-09-13 09:48:20.903 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：148,B_SourceLightType
2025-09-13 09:48:20.961 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:20.973 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":148,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_148_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:21.031 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:21.033 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":148,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_148_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:21.173 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;148/209,
2025-09-13 09:48:21.182 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:21.396 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:21.507 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:21
2025-09-13 09:48:21.560 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:21
2025-09-13 09:48:21.746 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 149
2025-09-13 09:48:21.746 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 149
2025-09-13 09:48:21.746 [Thd =66]  Info Default  开始扫描条带； [149/209]
2025-09-13 09:48:21.748 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:21.751 [Thd =20]  Info Default ***row:149, vectorBeginX:-16.356, vectorBeginY:-26.182, captureBeginX:-12.736, captureBeginY:-26.182, captureEndX:10.761, captureEndY:-26.182, vectorEndX:14.663, vectorEndY:-26.182
2025-09-13 09:48:21.751 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:21.752 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361831867235,EndPoint:-10.7606911859869
2025-09-13 09:48:21.849 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:21
2025-09-13 09:48:21.902 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:21
2025-09-13 09:48:22.953 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:149
2025-09-13 09:48:22.954 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:149,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:22.954 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:22.954 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:149
2025-09-13 09:48:22.954 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:149,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:22.954 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:149,source_light_Type:B_SourceLightType
2025-09-13 09:48:22.954 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:149,source_light_Type:A_SourceLightType
2025-09-13 09:48:22.955 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：149,B_SourceLightType
2025-09-13 09:48:22.955 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：149,A_SourceLightType
2025-09-13 09:48:23.010 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:23.012 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":149,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_149_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:23.076 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:23.077 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":149,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_149_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:23.218 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;149/209,
2025-09-13 09:48:23.227 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:23.268 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:23.618 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 150
2025-09-13 09:48:23.618 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 150
2025-09-13 09:48:23.618 [Thd =172]  Info Default  开始扫描条带； [150/209]
2025-09-13 09:48:23.621 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:23.623 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-26.60925, CaptureEndX:-12.39938, CaptureEndY:-26.60925, VectorBeginX:14.66318, VectorBeginY:-26.60925, VectorEndX:-16.35594, VectorEndY:-26.60925, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:23.623 [Thd =20]  Info Default ***row:150, vectorBeginX:14.663, vectorBeginY:-26.609, captureBeginX:11.097, captureBeginY:-26.609, captureEndX:-12.399, captureEndY:-26.609, vectorEndX:-16.356, vectorEndY:-26.609
2025-09-13 09:48:23.623 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:23.624 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.09749877157,EndPoint:12.3993756011404
2025-09-13 09:48:24.824 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:150
2025-09-13 09:48:24.824 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:150,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:24.824 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:24.825 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:150
2025-09-13 09:48:24.825 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:150,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:24.825 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:150,source_light_Type:A_SourceLightType
2025-09-13 09:48:24.825 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：150,A_SourceLightType
2025-09-13 09:48:24.825 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:150,source_light_Type:B_SourceLightType
2025-09-13 09:48:24.825 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：150,B_SourceLightType
2025-09-13 09:48:24.876 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:24.878 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":150,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_150_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:24.936 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:24.937 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":150,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_150_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:25.098 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;150/209,
2025-09-13 09:48:25.107 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:25.153 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:25.504 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 151
2025-09-13 09:48:25.570 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 151
2025-09-13 09:48:25.571 [Thd =38]  Info Default  开始扫描条带； [151/209]
2025-09-13 09:48:25.573 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:25.576 [Thd =20]  Info Default ***row:151, vectorBeginX:-16.356, vectorBeginY:-27.037, captureBeginX:-12.736, captureBeginY:-27.037, captureEndX:10.761, captureEndY:-27.037, vectorEndX:14.663, vectorEndY:-27.037
2025-09-13 09:48:25.576 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:25.578 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361871540087,EndPoint:-10.7606872187017
2025-09-13 09:48:25.580 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:25
2025-09-13 09:48:25.606 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:25
2025-09-13 09:48:25.700 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:25
2025-09-13 09:48:25.757 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:25
2025-09-13 09:48:26.784 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:151
2025-09-13 09:48:26.785 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:151,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:26.785 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:26.788 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:151
2025-09-13 09:48:26.788 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:151,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:26.788 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:151,source_light_Type:B_SourceLightType
2025-09-13 09:48:26.788 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：151,B_SourceLightType
2025-09-13 09:48:26.788 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：151,A_SourceLightType
2025-09-13 09:48:26.788 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:151,source_light_Type:A_SourceLightType
2025-09-13 09:48:26.836 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:26.838 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":151,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_151_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:26.891 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:26.893 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":151,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_151_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:27.044 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;151/209,
2025-09-13 09:48:27.053 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:27.094 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:27.444 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 152
2025-09-13 09:48:27.444 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 152
2025-09-13 09:48:27.444 [Thd =75]  Info Default  开始扫描条带； [152/209]
2025-09-13 09:48:27.446 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:27.449 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-27.46435, CaptureEndX:-12.39937, CaptureEndY:-27.46435, VectorBeginX:14.66318, VectorBeginY:-27.46435, VectorEndX:-16.35594, VectorEndY:-27.46435, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:27.449 [Thd =20]  Info Default ***row:152, vectorBeginX:14.663, vectorBeginY:-27.464, captureBeginX:11.097, captureBeginY:-27.464, captureEndX:-12.399, captureEndY:-27.464, vectorEndX:-16.356, vectorEndY:-27.464
2025-09-13 09:48:27.449 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:27.450 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974999311884,EndPoint:12.399374441522
2025-09-13 09:48:28.654 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:152
2025-09-13 09:48:28.654 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:152,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:28.654 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:28.655 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:152
2025-09-13 09:48:28.656 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:152,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:28.656 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:152,source_light_Type:B_SourceLightType
2025-09-13 09:48:28.656 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:152,source_light_Type:A_SourceLightType
2025-09-13 09:48:28.656 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：152,B_SourceLightType
2025-09-13 09:48:28.656 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：152,A_SourceLightType
2025-09-13 09:48:28.702 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:28.704 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":152,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_152_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:28.759 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:28.761 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":152,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_152_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:28.915 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;152/209,
2025-09-13 09:48:28.924 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:29.015 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:29.366 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 153
2025-09-13 09:48:29.366 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 153
2025-09-13 09:48:29.366 [Thd =51]  Info Default  开始扫描条带； [153/209]
2025-09-13 09:48:29.368 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:29
2025-09-13 09:48:29.368 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:29.371 [Thd =20]  Info Default ***row:153, vectorBeginX:-16.356, vectorBeginY:-27.892, captureBeginX:-12.736, captureBeginY:-27.892, captureEndX:10.761, captureEndY:-27.892, vectorEndX:14.663, vectorEndY:-27.892
2025-09-13 09:48:29.371 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:29.372 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361858722704,EndPoint:-10.76068850044
2025-09-13 09:48:29.395 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:29
2025-09-13 09:48:29.897 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:29
2025-09-13 09:48:29.943 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:29
2025-09-13 09:48:30.574 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:153
2025-09-13 09:48:30.574 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:153,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:30.574 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:30.575 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:153
2025-09-13 09:48:30.575 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:153,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:30.575 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:153,source_light_Type:B_SourceLightType
2025-09-13 09:48:30.575 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：153,B_SourceLightType
2025-09-13 09:48:30.575 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：153,A_SourceLightType
2025-09-13 09:48:30.575 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:153,source_light_Type:A_SourceLightType
2025-09-13 09:48:30.626 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:30.628 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":153,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_153_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:30.681 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:30
2025-09-13 09:48:30.683 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:30.685 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":153,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_153_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:30.707 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:30
2025-09-13 09:48:30.837 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;153/209,
2025-09-13 09:48:30.845 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:30.897 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:31.248 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 154
2025-09-13 09:48:31.248 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 154
2025-09-13 09:48:31.248 [Thd =221]  Info Default  开始扫描条带； [154/209]
2025-09-13 09:48:31.250 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:31.252 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-28.31945, CaptureEndX:-12.39937, CaptureEndY:-28.31945, VectorBeginX:14.66318, VectorBeginY:-28.31945, VectorEndX:-16.35594, VectorEndY:-28.31945, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:31.253 [Thd =20]  Info Default ***row:154, vectorBeginX:14.663, vectorBeginY:-28.319, captureBeginX:11.098, captureBeginY:-28.319, captureEndX:-12.399, captureEndY:-28.319, vectorEndX:-16.356, vectorEndY:-28.319
2025-09-13 09:48:31.253 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:31.254 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975009077669,EndPoint:12.3993734649435
2025-09-13 09:48:32.456 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:154
2025-09-13 09:48:32.456 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:154,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:32.456 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:32.457 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:154
2025-09-13 09:48:32.457 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:154,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:32.457 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:154,source_light_Type:B_SourceLightType
2025-09-13 09:48:32.457 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:154,source_light_Type:A_SourceLightType
2025-09-13 09:48:32.457 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：154,B_SourceLightType
2025-09-13 09:48:32.457 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：154,A_SourceLightType
2025-09-13 09:48:32.508 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:32.512 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":154,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_154_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:32.565 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:32.567 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":154,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_154_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:32.719 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;154/209,
2025-09-13 09:48:32.728 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:32.838 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:33.188 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 155
2025-09-13 09:48:33.188 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 155
2025-09-13 09:48:33.188 [Thd =38]  Info Default  开始扫描条带； [155/209]
2025-09-13 09:48:33.191 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:33.193 [Thd =20]  Info Default ***row:155, vectorBeginX:-16.356, vectorBeginY:-28.747, captureBeginX:-12.736, captureBeginY:-28.747, captureEndX:10.761, captureEndY:-28.747, vectorEndX:14.663, vectorEndY:-28.747
2025-09-13 09:48:33.193 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:33.194 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361849567431,EndPoint:-10.7606894159673
2025-09-13 09:48:33.443 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:33
2025-09-13 09:48:33.492 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:33
2025-09-13 09:48:34.397 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:155
2025-09-13 09:48:34.397 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:155,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:34.397 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:34.397 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:155
2025-09-13 09:48:34.397 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:155,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:34.397 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:155,source_light_Type:A_SourceLightType
2025-09-13 09:48:34.398 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:155,source_light_Type:B_SourceLightType
2025-09-13 09:48:34.398 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：155,A_SourceLightType
2025-09-13 09:48:34.398 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：155,B_SourceLightType
2025-09-13 09:48:34.446 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:34.448 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":155,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_155_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:34.501 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:34.503 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":155,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_155_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:34.662 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;155/209,
2025-09-13 09:48:34.671 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:34.720 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:35.061 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 156
2025-09-13 09:48:35.061 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 156
2025-09-13 09:48:35.061 [Thd =66]  Info Default  开始扫描条带； [156/209]
2025-09-13 09:48:35.063 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:35.066 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-29.17455, CaptureEndX:-12.39937, CaptureEndY:-29.17455, VectorBeginX:14.66318, VectorBeginY:-29.17455, VectorEndX:-16.35594, VectorEndY:-29.17455, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:35.066 [Thd =20]  Info Default ***row:156, vectorBeginX:14.663, vectorBeginY:-29.175, captureBeginX:11.098, captureBeginY:-29.175, captureEndX:-12.399, captureEndY:-29.175, vectorEndX:-16.356, vectorEndY:-29.175
2025-09-13 09:48:35.066 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:35.067 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975002363917,EndPoint:12.3993741363187
2025-09-13 09:48:35.314 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:35
2025-09-13 09:48:35.361 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:35
2025-09-13 09:48:36.267 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:156
2025-09-13 09:48:36.267 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:156,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:36.267 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:36.268 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:156
2025-09-13 09:48:36.269 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:156,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:36.269 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:156,source_light_Type:A_SourceLightType
2025-09-13 09:48:36.269 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:156,source_light_Type:B_SourceLightType
2025-09-13 09:48:36.269 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：156,A_SourceLightType
2025-09-13 09:48:36.269 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：156,B_SourceLightType
2025-09-13 09:48:36.331 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:36.336 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":156,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_156_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:36.389 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:36.391 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":156,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_156_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:36.542 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;156/209,
2025-09-13 09:48:36.551 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:36.618 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:36.968 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 157
2025-09-13 09:48:36.968 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 157
2025-09-13 09:48:36.968 [Thd =47]  Info Default  开始扫描条带； [157/209]
2025-09-13 09:48:36.970 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:36.973 [Thd =20]  Info Default ***row:157, vectorBeginX:-16.356, vectorBeginY:-29.602, captureBeginX:-12.736, captureBeginY:-29.602, captureEndX:10.761, captureEndY:-29.602, vectorEndX:14.663, vectorEndY:-29.602
2025-09-13 09:48:36.973 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:36.974 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361859333056,EndPoint:-10.7606884394048
2025-09-13 09:48:38.176 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:157
2025-09-13 09:48:38.176 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:157,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:38.176 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:38.177 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:157
2025-09-13 09:48:38.177 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:157,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:38.177 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:157,source_light_Type:B_SourceLightType
2025-09-13 09:48:38.177 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:157,source_light_Type:A_SourceLightType
2025-09-13 09:48:38.177 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：157,B_SourceLightType
2025-09-13 09:48:38.177 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：157,A_SourceLightType
2025-09-13 09:48:38.233 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:38.235 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":157,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_157_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:38.287 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:38.289 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":157,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_157_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:38.442 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;157/209,
2025-09-13 09:48:38.451 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:38.497 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:38.846 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 158
2025-09-13 09:48:38.846 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 158
2025-09-13 09:48:38.846 [Thd =47]  Info Default  开始扫描条带； [158/209]
2025-09-13 09:48:38.848 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:38.851 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-30.02964, CaptureEndX:-12.39937, CaptureEndY:-30.02964, VectorBeginX:14.66318, VectorBeginY:-30.02964, VectorEndX:-16.35594, VectorEndY:-30.02964, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:38.851 [Thd =20]  Info Default ***row:158, vectorBeginX:14.663, vectorBeginY:-30.030, captureBeginX:11.098, captureBeginY:-30.030, captureEndX:-12.399, captureEndY:-30.030, vectorEndX:-16.356, vectorEndY:-30.030
2025-09-13 09:48:38.851 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:38.852 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975050581568,EndPoint:12.3993693145536
2025-09-13 09:48:39.200 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:39
2025-09-13 09:48:39.219 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:39
2025-09-13 09:48:40.052 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:158
2025-09-13 09:48:40.052 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:158,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:40.052 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:40.053 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:158
2025-09-13 09:48:40.053 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:158,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:40.053 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:158,source_light_Type:A_SourceLightType
2025-09-13 09:48:40.053 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：158,A_SourceLightType
2025-09-13 09:48:40.053 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：158,B_SourceLightType
2025-09-13 09:48:40.053 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:158,source_light_Type:B_SourceLightType
2025-09-13 09:48:40.100 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:40.102 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":158,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_158_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:40.158 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:40.160 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":158,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_158_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:40.318 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;158/209,
2025-09-13 09:48:40.327 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:40.382 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:40.732 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 159
2025-09-13 09:48:40.732 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 159
2025-09-13 09:48:40.732 [Thd =172]  Info Default  开始扫描条带； [159/209]
2025-09-13 09:48:40.735 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:40.737 [Thd =20]  Info Default ***row:159, vectorBeginX:-16.356, vectorBeginY:-30.457, captureBeginX:-12.736, captureBeginY:-30.457, captureEndX:10.761, captureEndY:-30.457, vectorEndX:14.663, vectorEndY:-30.457
2025-09-13 09:48:40.737 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:40.738 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361819049852,EndPoint:-10.7606924677252
2025-09-13 09:48:40.818 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:40
2025-09-13 09:48:40.868 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:40
2025-09-13 09:48:40.960 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:40
2025-09-13 09:48:41.046 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:41
2025-09-13 09:48:41.941 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:159
2025-09-13 09:48:41.941 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:159,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:41.941 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:41.942 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:159
2025-09-13 09:48:41.942 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:159,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:41.942 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:159,source_light_Type:A_SourceLightType
2025-09-13 09:48:41.942 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：159,A_SourceLightType
2025-09-13 09:48:41.942 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：159,B_SourceLightType
2025-09-13 09:48:41.942 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:159,source_light_Type:B_SourceLightType
2025-09-13 09:48:41.990 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:41.992 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":159,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_159_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:42.046 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:42.048 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":159,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_159_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:42.205 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;159/209,
2025-09-13 09:48:42.214 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:42.259 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:42.608 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 160
2025-09-13 09:48:42.608 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 160
2025-09-13 09:48:42.608 [Thd =222]  Info Default  开始扫描条带； [160/209]
2025-09-13 09:48:42.610 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:42.612 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-30.88474, CaptureEndX:-12.39937, CaptureEndY:-30.88474, VectorBeginX:14.66318, VectorBeginY:-30.88474, VectorEndX:-16.35594, VectorEndY:-30.88474, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:42.612 [Thd =20]  Info Default ***row:160, vectorBeginX:14.663, vectorBeginY:-30.885, captureBeginX:11.098, captureBeginY:-30.885, captureEndX:-12.399, captureEndY:-30.885, vectorEndX:-16.356, vectorEndY:-30.885
2025-09-13 09:48:42.612 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:42.614 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975025557657,EndPoint:12.3993718169447
2025-09-13 09:48:43.814 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:160
2025-09-13 09:48:43.814 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:160,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:43.814 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:43.815 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:160
2025-09-13 09:48:43.815 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:160,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:43.815 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:160,source_light_Type:B_SourceLightType
2025-09-13 09:48:43.815 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：160,B_SourceLightType
2025-09-13 09:48:43.815 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：160,A_SourceLightType
2025-09-13 09:48:43.815 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:160,source_light_Type:A_SourceLightType
2025-09-13 09:48:43.865 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:43.867 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":160,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_160_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:43.917 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:43.919 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":160,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_160_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:44.086 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;160/209,
2025-09-13 09:48:44.095 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:44.136 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:44.486 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 161
2025-09-13 09:48:44.486 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 161
2025-09-13 09:48:44.486 [Thd =206]  Info Default  开始扫描条带； [161/209]
2025-09-13 09:48:44.489 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:44.491 [Thd =20]  Info Default ***row:161, vectorBeginX:-16.356, vectorBeginY:-31.312, captureBeginX:-12.736, captureBeginY:-31.312, captureEndX:10.761, captureEndY:-31.312, vectorEndX:14.663, vectorEndY:-31.312
2025-09-13 09:48:44.491 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:44.493 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361869098681,EndPoint:-10.7606874628423
2025-09-13 09:48:44.823 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:44
2025-09-13 09:48:44.841 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:44
2025-09-13 09:48:45.695 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:161
2025-09-13 09:48:45.695 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:161,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:45.695 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:45.695 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:161
2025-09-13 09:48:45.696 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:161,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:45.696 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:161,source_light_Type:A_SourceLightType
2025-09-13 09:48:45.696 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:161,source_light_Type:B_SourceLightType
2025-09-13 09:48:45.696 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：161,A_SourceLightType
2025-09-13 09:48:45.696 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：161,B_SourceLightType
2025-09-13 09:48:45.742 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:45.745 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":161,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_161_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:45.795 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:45.800 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":161,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_161_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:45.958 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;161/209,
2025-09-13 09:48:45.967 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:46.010 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:46.382 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 162
2025-09-13 09:48:46.382 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 162
2025-09-13 09:48:46.386 [Thd =136]  Info Default  开始扫描条带； [162/209]
2025-09-13 09:48:46.389 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:46.391 [Thd =20]  Info Default CaptureBeginX: 11.09749, CaptureBeginY:-31.73983, CaptureEndX:-12.39938, CaptureEndY:-31.73983, VectorBeginX:14.66317, VectorBeginY:-31.73983, VectorEndX:-16.35595, VectorEndY:-31.73983, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:46.391 [Thd =20]  Info Default ***row:162, vectorBeginX:14.663, vectorBeginY:-31.740, captureBeginX:11.097, captureBeginY:-31.740, captureEndX:-12.399, captureEndY:-31.740, vectorEndX:-16.356, vectorEndY:-31.740
2025-09-13 09:48:46.391 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:46.392 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974948042383,EndPoint:12.3993795684721
2025-09-13 09:48:46.892 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:46
2025-09-13 09:48:46.920 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:46
2025-09-13 09:48:47.591 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:162
2025-09-13 09:48:47.591 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:162,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:47.591 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:47.592 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:162
2025-09-13 09:48:47.592 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:162,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:47.592 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:162,source_light_Type:B_SourceLightType
2025-09-13 09:48:47.592 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:162,source_light_Type:A_SourceLightType
2025-09-13 09:48:47.593 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：162,B_SourceLightType
2025-09-13 09:48:47.593 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：162,A_SourceLightType
2025-09-13 09:48:47.649 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:47.651 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":162,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_162_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:47.702 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:47.704 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":162,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_162_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:47.858 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;162/209,
2025-09-13 09:48:47.866 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:47.908 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:48.092 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:48
2025-09-13 09:48:48.162 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:48
2025-09-13 09:48:48.260 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 163
2025-09-13 09:48:48.260 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 163
2025-09-13 09:48:48.260 [Thd =73]  Info Default  开始扫描条带； [163/209]
2025-09-13 09:48:48.262 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:48.264 [Thd =20]  Info Default ***row:163, vectorBeginX:-16.356, vectorBeginY:-32.167, captureBeginX:-12.736, captureBeginY:-32.167, captureEndX:10.761, captureEndY:-32.167, vectorEndX:14.663, vectorEndY:-32.167
2025-09-13 09:48:48.264 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:48.265 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361922809618,EndPoint:-10.7606820917486
2025-09-13 09:48:49.467 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:163
2025-09-13 09:48:49.467 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:163,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:49.467 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:49.470 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:163
2025-09-13 09:48:49.470 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:163,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:49.470 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:163,source_light_Type:B_SourceLightType
2025-09-13 09:48:49.470 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：163,B_SourceLightType
2025-09-13 09:48:49.470 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：163,A_SourceLightType
2025-09-13 09:48:49.470 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:163,source_light_Type:A_SourceLightType
2025-09-13 09:48:49.518 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:49.519 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":163,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_163_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:49.571 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:49.572 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":163,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_163_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:49.739 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;163/209,
2025-09-13 09:48:49.748 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:49.790 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:49.868 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:49
2025-09-13 09:48:49.895 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:49
2025-09-13 09:48:50.140 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 164
2025-09-13 09:48:50.140 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 164
2025-09-13 09:48:50.140 [Thd =206]  Info Default  开始扫描条带； [164/209]
2025-09-13 09:48:50.143 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:50.145 [Thd =20]  Info Default CaptureBeginX: 11.09749, CaptureBeginY:-32.59492, CaptureEndX:-12.39938, CaptureEndY:-32.59492, VectorBeginX:14.66317, VectorBeginY:-32.59492, VectorEndX:-16.35595, VectorEndY:-32.59492, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:50.146 [Thd =20]  Info Default ***row:164, vectorBeginX:14.663, vectorBeginY:-32.595, captureBeginX:11.097, captureBeginY:-32.595, captureEndX:-12.399, captureEndY:-32.595, vectorEndX:-16.356, vectorEndY:-32.595
2025-09-13 09:48:50.146 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:50.147 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097490836886,EndPoint:12.3993835358244
2025-09-13 09:48:51.348 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:164
2025-09-13 09:48:51.348 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:164,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:51.348 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:51.349 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:164
2025-09-13 09:48:51.349 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:164,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:51.349 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:164,source_light_Type:B_SourceLightType
2025-09-13 09:48:51.349 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:164,source_light_Type:A_SourceLightType
2025-09-13 09:48:51.349 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：164,B_SourceLightType
2025-09-13 09:48:51.349 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：164,A_SourceLightType
2025-09-13 09:48:51.397 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:51.398 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":164,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_164_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:51.450 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:51.452 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":164,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_164_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:51.513 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:51
2025-09-13 09:48:51.539 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:51
2025-09-13 09:48:51.621 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;164/209,
2025-09-13 09:48:51.631 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:51.821 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:52.171 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 165
2025-09-13 09:48:52.171 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 165
2025-09-13 09:48:52.171 [Thd =65]  Info Default  开始扫描条带； [165/209]
2025-09-13 09:48:52.173 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:52.175 [Thd =20]  Info Default ***row:165, vectorBeginX:-16.356, vectorBeginY:-33.022, captureBeginX:-12.736, captureBeginY:-33.022, captureEndX:10.761, captureEndY:-33.022, vectorEndX:14.663, vectorEndY:-33.022
2025-09-13 09:48:52.175 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:52.177 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361909992235,EndPoint:-10.7606833734869
2025-09-13 09:48:53.379 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:165
2025-09-13 09:48:53.379 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:165,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:53.379 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:53.380 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:165
2025-09-13 09:48:53.380 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:165,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:53.380 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:165,source_light_Type:B_SourceLightType
2025-09-13 09:48:53.380 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：165,B_SourceLightType
2025-09-13 09:48:53.380 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：165,A_SourceLightType
2025-09-13 09:48:53.380 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:165,source_light_Type:A_SourceLightType
2025-09-13 09:48:53.427 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:53.429 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":165,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_165_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:53.482 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:53.483 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":165,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_165_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:53.646 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;165/209,
2025-09-13 09:48:53.656 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:53.708 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:53.902 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:53
2025-09-13 09:48:53.980 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:53
2025-09-13 09:48:54.058 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 166
2025-09-13 09:48:54.058 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 166
2025-09-13 09:48:54.058 [Thd =65]  Info Default  开始扫描条带； [166/209]
2025-09-13 09:48:54.060 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:54.062 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-33.45001, CaptureEndX:-12.39937, CaptureEndY:-33.45001, VectorBeginX:14.66318, VectorBeginY:-33.45001, VectorEndX:-16.35594, VectorEndY:-33.45001, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:54.063 [Thd =20]  Info Default ***row:166, vectorBeginX:14.663, vectorBeginY:-33.450, captureBeginX:11.098, captureBeginY:-33.450, captureEndX:-12.399, captureEndY:-33.450, vectorEndX:-16.356, vectorEndY:-33.450
2025-09-13 09:48:54.063 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:54.064 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975007245974,EndPoint:12.399373648113
2025-09-13 09:48:54.857 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:54
2025-09-13 09:48:54.872 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:54
2025-09-13 09:48:55.263 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:166
2025-09-13 09:48:55.264 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:166,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:55.264 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:55.265 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:166
2025-09-13 09:48:55.265 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:166,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:55.265 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:166,source_light_Type:A_SourceLightType
2025-09-13 09:48:55.265 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:166,source_light_Type:B_SourceLightType
2025-09-13 09:48:55.265 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：166,A_SourceLightType
2025-09-13 09:48:55.265 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：166,B_SourceLightType
2025-09-13 09:48:55.317 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:55.319 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":166,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_166_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:55.434 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:55.436 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":166,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_166_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:55.534 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;166/209,
2025-09-13 09:48:55.543 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:55.609 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:55.965 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 167
2025-09-13 09:48:55.965 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 167
2025-09-13 09:48:55.965 [Thd =206]  Info Default  开始扫描条带； [167/209]
2025-09-13 09:48:55.967 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:55.968 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:48:55
2025-09-13 09:48:55.969 [Thd =20]  Info Default ***row:167, vectorBeginX:-16.356, vectorBeginY:-33.878, captureBeginX:-12.736, captureBeginY:-33.878, captureEndX:10.761, captureEndY:-33.878, vectorEndX:14.663, vectorEndY:-33.878
2025-09-13 09:48:55.969 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:55.971 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361873371142,EndPoint:-10.7606870355962
2025-09-13 09:48:55.999 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:48:55
2025-09-13 09:48:57.173 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:167
2025-09-13 09:48:57.173 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:167,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:57.173 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:57.174 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:167
2025-09-13 09:48:57.174 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:167,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:57.174 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:167,source_light_Type:A_SourceLightType
2025-09-13 09:48:57.174 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:167,source_light_Type:B_SourceLightType
2025-09-13 09:48:57.174 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：167,A_SourceLightType
2025-09-13 09:48:57.174 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：167,B_SourceLightType
2025-09-13 09:48:57.221 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:57.223 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":167,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_167_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:57.276 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:57.278 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":167,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_167_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:57.445 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;167/209,
2025-09-13 09:48:57.454 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:57.502 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:57.853 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 168
2025-09-13 09:48:57.853 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 168
2025-09-13 09:48:57.853 [Thd =65]  Info Default  开始扫描条带； [168/209]
2025-09-13 09:48:57.855 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:48:57.858 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-34.30511, CaptureEndX:-12.39937, CaptureEndY:-34.30511, VectorBeginX:14.66318, VectorBeginY:-34.30511, VectorEndX:-16.35594, VectorEndY:-34.30511, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:48:57.858 [Thd =20]  Info Default ***row:168, vectorBeginX:14.663, vectorBeginY:-34.305, captureBeginX:11.098, captureBeginY:-34.305, captureEndX:-12.399, captureEndY:-34.305, vectorEndX:-16.356, vectorEndY:-34.305
2025-09-13 09:48:57.858 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:57.859 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975002363619,EndPoint:12.3993741363485
2025-09-13 09:48:59.058 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:168
2025-09-13 09:48:59.059 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:168,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:59.059 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:48:59.060 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:168
2025-09-13 09:48:59.060 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:168,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:48:59.060 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:168,source_light_Type:B_SourceLightType
2025-09-13 09:48:59.060 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:168,source_light_Type:A_SourceLightType
2025-09-13 09:48:59.060 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：168,B_SourceLightType
2025-09-13 09:48:59.060 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：168,A_SourceLightType
2025-09-13 09:48:59.108 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:48:59.111 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":168,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_168_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:59.165 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:48:59.166 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":168,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_168_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:48:59.333 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;168/209,
2025-09-13 09:48:59.342 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:48:59.391 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:48:59.740 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 169
2025-09-13 09:48:59.740 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 169
2025-09-13 09:48:59.740 [Thd =219]  Info Default  开始扫描条带； [169/209]
2025-09-13 09:48:59.742 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:48:59.745 [Thd =20]  Info Default ***row:169, vectorBeginX:-16.356, vectorBeginY:-34.733, captureBeginX:-12.736, captureBeginY:-34.733, captureEndX:10.761, captureEndY:-34.733, vectorEndX:14.663, vectorEndY:-34.733
2025-09-13 09:48:59.745 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:48:59.746 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361859943407,EndPoint:-10.7606883783697
2025-09-13 09:49:00.270 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:00
2025-09-13 09:49:00.295 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:00
2025-09-13 09:49:00.947 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:169
2025-09-13 09:49:00.947 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:169,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:00.947 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:00.949 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:169
2025-09-13 09:49:00.949 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:169,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:00.949 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:169,source_light_Type:A_SourceLightType
2025-09-13 09:49:00.949 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:169,source_light_Type:B_SourceLightType
2025-09-13 09:49:00.949 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：169,A_SourceLightType
2025-09-13 09:49:00.949 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：169,B_SourceLightType
2025-09-13 09:49:00.996 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:00.997 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":169,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_169_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:01.051 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:01.053 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":169,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_169_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:01.214 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;169/209,
2025-09-13 09:49:01.224 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:01.265 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:01.615 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 170
2025-09-13 09:49:01.615 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 170
2025-09-13 09:49:01.615 [Thd =57]  Info Default  开始扫描条带； [170/209]
2025-09-13 09:49:01.617 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:01.620 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-35.16021, CaptureEndX:-12.39938, CaptureEndY:-35.16021, VectorBeginX:14.66317, VectorBeginY:-35.16021, VectorEndX:-16.35595, VectorEndY:-35.16021, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:01.620 [Thd =20]  Info Default ***row:170, vectorBeginX:14.663, vectorBeginY:-35.160, captureBeginX:11.097, captureBeginY:-35.160, captureEndX:-12.399, captureEndY:-35.160, vectorEndX:-16.356, vectorEndY:-35.160
2025-09-13 09:49:01.620 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:01.621 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974970015154,EndPoint:12.399377371195
2025-09-13 09:49:01.799 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:01
2025-09-13 09:49:01.838 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:01
2025-09-13 09:49:02.821 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:170
2025-09-13 09:49:02.821 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:170,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:02.821 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:02.822 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:170
2025-09-13 09:49:02.822 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:170,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:02.822 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:170,source_light_Type:A_SourceLightType
2025-09-13 09:49:02.822 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:170,source_light_Type:B_SourceLightType
2025-09-13 09:49:02.822 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：170,A_SourceLightType
2025-09-13 09:49:02.822 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：170,B_SourceLightType
2025-09-13 09:49:02.869 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:02.871 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":170,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_170_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:02.924 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:02.926 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":170,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_170_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:02.948 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:02
2025-09-13 09:49:02.972 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:02
2025-09-13 09:49:03.089 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;170/209,
2025-09-13 09:49:03.098 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:03.141 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:03.490 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 171
2025-09-13 09:49:03.490 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 171
2025-09-13 09:49:03.490 [Thd =112]  Info Default  开始扫描条带； [171/209]
2025-09-13 09:49:03.492 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:03.495 [Thd =20]  Info Default ***row:171, vectorBeginX:-16.356, vectorBeginY:-35.588, captureBeginX:-12.736, captureBeginY:-35.588, captureEndX:10.761, captureEndY:-35.588, vectorEndX:14.663, vectorEndY:-35.588
2025-09-13 09:49:03.495 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:03.496 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361875812548,EndPoint:-10.7606867914556
2025-09-13 09:49:04.698 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:171
2025-09-13 09:49:04.698 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:171,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:04.698 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:04.699 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:171
2025-09-13 09:49:04.699 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:171,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:04.699 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:171,source_light_Type:B_SourceLightType
2025-09-13 09:49:04.699 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:171,source_light_Type:A_SourceLightType
2025-09-13 09:49:04.699 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：171,B_SourceLightType
2025-09-13 09:49:04.699 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：171,A_SourceLightType
2025-09-13 09:49:04.746 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:04.748 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":171,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_171_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:04.797 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:04.799 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":171,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_171_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:04.962 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;171/209,
2025-09-13 09:49:04.971 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:05.021 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:05.376 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 172
2025-09-13 09:49:05.376 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 172
2025-09-13 09:49:05.376 [Thd =75]  Info Default  开始扫描条带； [172/209]
2025-09-13 09:49:05.378 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:05.381 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-36.01531, CaptureEndX:-12.39938, CaptureEndY:-36.01531, VectorBeginX:14.66317, VectorBeginY:-36.01531, VectorEndX:-16.35595, VectorEndY:-36.01531, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:05.381 [Thd =20]  Info Default ***row:172, vectorBeginX:14.663, vectorBeginY:-36.015, captureBeginX:11.097, captureBeginY:-36.015, captureEndX:-12.399, captureEndY:-36.015, vectorEndX:-16.356, vectorEndY:-36.015
2025-09-13 09:49:05.381 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:05.382 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974963301089,EndPoint:12.3993780426016
2025-09-13 09:49:05.982 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:05
2025-09-13 09:49:06.007 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:06
2025-09-13 09:49:06.582 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:172
2025-09-13 09:49:06.582 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:172,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:06.582 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:06.583 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:172
2025-09-13 09:49:06.583 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:172,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:06.583 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:172,source_light_Type:A_SourceLightType
2025-09-13 09:49:06.583 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:172,source_light_Type:B_SourceLightType
2025-09-13 09:49:06.583 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：172,A_SourceLightType
2025-09-13 09:49:06.583 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：172,B_SourceLightType
2025-09-13 09:49:06.645 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:06.649 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":172,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_172_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:06.699 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:06.701 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":172,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_172_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:06.851 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;172/209,
2025-09-13 09:49:06.861 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:06.909 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:07.260 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 173
2025-09-13 09:49:07.263 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 173
2025-09-13 09:49:07.263 [Thd =219]  Info Default  开始扫描条带； [173/209]
2025-09-13 09:49:07.265 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:07.268 [Thd =20]  Info Default ***row:173, vectorBeginX:-16.356, vectorBeginY:-36.443, captureBeginX:-12.736, captureBeginY:-36.443, captureEndX:10.761, captureEndY:-36.443, vectorEndX:14.663, vectorEndY:-36.443
2025-09-13 09:49:07.268 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:07.269 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736188435747,EndPoint:-10.7606859369634
2025-09-13 09:49:07.761 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:07
2025-09-13 09:49:07.812 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:07
2025-09-13 09:49:08.471 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:173
2025-09-13 09:49:08.471 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:173,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:08.471 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:08.471 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:173
2025-09-13 09:49:08.471 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:173,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:08.471 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:173,source_light_Type:B_SourceLightType
2025-09-13 09:49:08.472 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:173,source_light_Type:A_SourceLightType
2025-09-13 09:49:08.472 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：173,B_SourceLightType
2025-09-13 09:49:08.472 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：173,A_SourceLightType
2025-09-13 09:49:08.522 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:08.524 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":173,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_173_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:08.585 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:08.587 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":173,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_173_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:08.738 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;173/209,
2025-09-13 09:49:08.747 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:08.873 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:08.911 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:08
2025-09-13 09:49:08.959 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:08
2025-09-13 09:49:09.223 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 174
2025-09-13 09:49:09.223 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 174
2025-09-13 09:49:09.223 [Thd =47]  Info Default  开始扫描条带； [174/209]
2025-09-13 09:49:09.225 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:09.226 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-36.87040, CaptureEndX:-12.39938, CaptureEndY:-36.87040, VectorBeginX:14.66318, VectorBeginY:-36.87040, VectorEndX:-16.35594, VectorEndY:-36.87040, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:09.226 [Thd =20]  Info Default ***row:174, vectorBeginX:14.663, vectorBeginY:-36.870, captureBeginX:11.097, captureBeginY:-36.870, captureEndX:-12.399, captureEndY:-36.870, vectorEndX:-16.356, vectorEndY:-36.870
2025-09-13 09:49:09.226 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:09.227 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0974986494341,EndPoint:12.3993757232763
2025-09-13 09:49:10.427 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:174
2025-09-13 09:49:10.427 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:174,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:10.427 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:10.428 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:174
2025-09-13 09:49:10.428 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:174,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:10.428 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:174,source_light_Type:B_SourceLightType
2025-09-13 09:49:10.428 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：174,B_SourceLightType
2025-09-13 09:49:10.428 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：174,A_SourceLightType
2025-09-13 09:49:10.428 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:174,source_light_Type:A_SourceLightType
2025-09-13 09:49:10.479 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:10.481 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:10
2025-09-13 09:49:10.481 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":174,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_174_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:10.531 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:10.533 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":174,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_174_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:10.538 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:10
2025-09-13 09:49:10.694 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;174/209,
2025-09-13 09:49:10.704 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:10.910 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:11.259 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 175
2025-09-13 09:49:11.259 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 175
2025-09-13 09:49:11.259 [Thd =47]  Info Default  开始扫描条带； [175/209]
2025-09-13 09:49:11.261 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:11.264 [Thd =20]  Info Default ***row:175, vectorBeginX:-16.356, vectorBeginY:-37.298, captureBeginX:-12.736, captureBeginY:-37.298, captureEndX:10.761, captureEndY:-37.298, vectorEndX:14.663, vectorEndY:-37.298
2025-09-13 09:49:11.264 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:11.265 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361918537157,EndPoint:-10.7606825189947
2025-09-13 09:49:11.708 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:11
2025-09-13 09:49:11.761 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:11
2025-09-13 09:49:12.467 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:175
2025-09-13 09:49:12.467 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:175,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:12.467 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:12.468 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:175
2025-09-13 09:49:12.468 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:175,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:12.468 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:175,source_light_Type:A_SourceLightType
2025-09-13 09:49:12.468 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:175,source_light_Type:B_SourceLightType
2025-09-13 09:49:12.468 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：175,A_SourceLightType
2025-09-13 09:49:12.468 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：175,B_SourceLightType
2025-09-13 09:49:12.515 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:12.518 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":175,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_175_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:12.568 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:12.571 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":175,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_175_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:12.586 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:12
2025-09-13 09:49:12.639 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:12
2025-09-13 09:49:12.739 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;175/209,
2025-09-13 09:49:12.748 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:12.897 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:13.246 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 176
2025-09-13 09:49:13.246 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 176
2025-09-13 09:49:13.246 [Thd =51]  Info Default  开始扫描条带； [176/209]
2025-09-13 09:49:13.248 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:13.250 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-37.72550, CaptureEndX:-12.39937, CaptureEndY:-37.72550, VectorBeginX:14.66318, VectorBeginY:-37.72550, VectorEndX:-16.35594, VectorEndY:-37.72550, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:13.251 [Thd =20]  Info Default ***row:176, vectorBeginX:14.663, vectorBeginY:-37.725, captureBeginX:11.097, captureBeginY:-37.725, captureEndX:-12.399, captureEndY:-37.725, vectorEndX:-16.356, vectorEndY:-37.725
2025-09-13 09:49:13.251 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:13.251 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097499686989,EndPoint:12.3993746857214
2025-09-13 09:49:14.451 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:176
2025-09-13 09:49:14.451 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:176,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:14.451 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:14.452 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:176
2025-09-13 09:49:14.452 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:176,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:14.452 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:176,source_light_Type:A_SourceLightType
2025-09-13 09:49:14.452 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:176,source_light_Type:B_SourceLightType
2025-09-13 09:49:14.452 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：176,A_SourceLightType
2025-09-13 09:49:14.453 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：176,B_SourceLightType
2025-09-13 09:49:14.499 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:14.501 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":176,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_176_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:14.551 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:14.553 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":176,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_176_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:14.718 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;176/209,
2025-09-13 09:49:14.727 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:14.786 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:15.137 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 177
2025-09-13 09:49:15.137 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 177
2025-09-13 09:49:15.137 [Thd =136]  Info Default  开始扫描条带； [177/209]
2025-09-13 09:49:15.140 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:15.142 [Thd =20]  Info Default ***row:177, vectorBeginX:-16.356, vectorBeginY:-38.153, captureBeginX:-12.736, captureBeginY:-38.153, captureEndX:10.761, captureEndY:-38.153, vectorEndX:14.663, vectorEndY:-38.153
2025-09-13 09:49:15.142 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:15.143 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736190022661,EndPoint:-10.7606843500494
2025-09-13 09:49:16.344 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:177
2025-09-13 09:49:16.344 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:177,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:16.344 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:16.346 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:177
2025-09-13 09:49:16.346 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:177,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:16.346 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:177,source_light_Type:A_SourceLightType
2025-09-13 09:49:16.346 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:177,source_light_Type:B_SourceLightType
2025-09-13 09:49:16.346 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：177,A_SourceLightType
2025-09-13 09:49:16.346 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：177,B_SourceLightType
2025-09-13 09:49:16.395 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:16.397 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":177,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_177_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:16.457 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:16.459 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":177,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_177_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:16.617 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;177/209,
2025-09-13 09:49:16.626 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:16.666 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:17.017 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 178
2025-09-13 09:49:17.017 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 178
2025-09-13 09:49:17.017 [Thd =75]  Info Default  开始扫描条带； [178/209]
2025-09-13 09:49:17.019 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:17.022 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-38.58059, CaptureEndX:-12.39938, CaptureEndY:-38.58059, VectorBeginX:14.66318, VectorBeginY:-38.58059, VectorEndX:-16.35594, VectorEndY:-38.58059, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:17.022 [Thd =20]  Info Default ***row:178, vectorBeginX:14.663, vectorBeginY:-38.581, captureBeginX:11.097, captureBeginY:-38.581, captureEndX:-12.399, captureEndY:-38.581, vectorEndX:-16.356, vectorEndY:-38.581
2025-09-13 09:49:17.022 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:17.023 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097499320801,EndPoint:12.3993750519094
2025-09-13 09:49:17.447 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:17
2025-09-13 09:49:17.483 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:17
2025-09-13 09:49:18.223 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:178
2025-09-13 09:49:18.223 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:178,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:18.223 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:18.225 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:178
2025-09-13 09:49:18.225 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:178,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:18.225 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:178,source_light_Type:B_SourceLightType
2025-09-13 09:49:18.225 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:178,source_light_Type:A_SourceLightType
2025-09-13 09:49:18.225 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：178,B_SourceLightType
2025-09-13 09:49:18.225 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：178,A_SourceLightType
2025-09-13 09:49:18.272 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:18.274 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":178,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_178_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:18.322 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:18.324 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":178,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_178_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:18.490 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;178/209,
2025-09-13 09:49:18.499 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:18.601 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:18.954 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 179
2025-09-13 09:49:18.954 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 179
2025-09-13 09:49:18.954 [Thd =65]  Info Default  开始扫描条带； [179/209]
2025-09-13 09:49:18.959 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:18.960 [Thd =20]  Info Default ***row:179, vectorBeginX:-16.356, vectorBeginY:-39.008, captureBeginX:-12.736, captureBeginY:-39.008, captureEndX:10.761, captureEndY:-39.008, vectorEndX:14.663, vectorEndY:-39.008
2025-09-13 09:49:18.960 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:18.962 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361834918993,EndPoint:-10.7606908808111
2025-09-13 09:49:19.068 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:19
2025-09-13 09:49:19.095 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:19
2025-09-13 09:49:20.165 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:179
2025-09-13 09:49:20.169 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:179,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:20.169 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:20.170 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:179
2025-09-13 09:49:20.170 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:179,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:20.170 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:179,source_light_Type:B_SourceLightType
2025-09-13 09:49:20.170 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:179,source_light_Type:A_SourceLightType
2025-09-13 09:49:20.170 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：179,B_SourceLightType
2025-09-13 09:49:20.170 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：179,A_SourceLightType
2025-09-13 09:49:20.219 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:20.221 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":179,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_179_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:20.273 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:20.275 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":179,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_179_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:20.431 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;179/209,
2025-09-13 09:49:20.440 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:20.674 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:21.023 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 180
2025-09-13 09:49:21.023 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 180
2025-09-13 09:49:21.023 [Thd =51]  Info Default  开始扫描条带； [180/209]
2025-09-13 09:49:21.025 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:21.027 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-39.43569, CaptureEndX:-12.39937, CaptureEndY:-39.43569, VectorBeginX:14.66318, VectorBeginY:-39.43569, VectorEndX:-16.35594, VectorEndY:-39.43569, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:21.027 [Thd =20]  Info Default ***row:180, vectorBeginX:14.663, vectorBeginY:-39.436, captureBeginX:11.098, captureBeginY:-39.436, captureEndX:-12.399, captureEndY:-39.436, vectorEndX:-16.356, vectorEndY:-39.436
2025-09-13 09:49:21.027 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:21.028 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975004805506,EndPoint:12.3993738921598
2025-09-13 09:49:21.299 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:21
2025-09-13 09:49:21.354 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:21
2025-09-13 09:49:22.216 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:22
2025-09-13 09:49:22.228 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:180
2025-09-13 09:49:22.228 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:180,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:22.228 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:22.230 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:180
2025-09-13 09:49:22.230 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:180,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:22.230 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:180,source_light_Type:B_SourceLightType
2025-09-13 09:49:22.230 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:180,source_light_Type:A_SourceLightType
2025-09-13 09:49:22.231 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：180,B_SourceLightType
2025-09-13 09:49:22.231 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：180,A_SourceLightType
2025-09-13 09:49:22.267 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:22
2025-09-13 09:49:22.278 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:22.280 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":180,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_180_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:22.331 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:22.333 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":180,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_180_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:22.504 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;180/209,
2025-09-13 09:49:22.512 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:22.621 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:22.971 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 181
2025-09-13 09:49:22.971 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 181
2025-09-13 09:49:22.971 [Thd =47]  Info Default  开始扫描条带； [181/209]
2025-09-13 09:49:22.973 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:22.976 [Thd =20]  Info Default ***row:181, vectorBeginX:-16.356, vectorBeginY:-39.863, captureBeginX:-12.736, captureBeginY:-39.863, captureEndX:10.761, captureEndY:-39.863, vectorEndX:14.663, vectorEndY:-39.863
2025-09-13 09:49:22.976 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:22.977 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361843463915,EndPoint:-10.7606900263189
2025-09-13 09:49:24.179 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:181
2025-09-13 09:49:24.179 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:181,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:24.179 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:24.180 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:181
2025-09-13 09:49:24.181 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:181,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:24.181 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:181,source_light_Type:B_SourceLightType
2025-09-13 09:49:24.181 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:181,source_light_Type:A_SourceLightType
2025-09-13 09:49:24.181 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：181,B_SourceLightType
2025-09-13 09:49:24.181 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：181,A_SourceLightType
2025-09-13 09:49:24.231 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:24.234 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":181,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_181_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:24.282 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:24.283 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":181,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_181_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:24.443 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;181/209,
2025-09-13 09:49:24.452 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:24.492 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:24.842 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 182
2025-09-13 09:49:24.842 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 182
2025-09-13 09:49:24.842 [Thd =112]  Info Default  开始扫描条带； [182/209]
2025-09-13 09:49:24.845 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:24.848 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-40.29078, CaptureEndX:-12.39937, CaptureEndY:-40.29078, VectorBeginX:14.66318, VectorBeginY:-40.29078, VectorEndX:-16.35594, VectorEndY:-40.29078, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:24.848 [Thd =20]  Info Default ***row:182, vectorBeginX:14.663, vectorBeginY:-40.291, captureBeginX:11.098, captureBeginY:-40.291, captureEndX:-12.399, captureEndY:-40.291, vectorEndX:-16.356, vectorEndY:-40.291
2025-09-13 09:49:24.848 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:24.849 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975062788798,EndPoint:12.3993680938306
2025-09-13 09:49:24.875 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:24
2025-09-13 09:49:24.922 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:24
2025-09-13 09:49:24.923 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:24
2025-09-13 09:49:24.963 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:24
2025-09-13 09:49:26.050 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:182
2025-09-13 09:49:26.050 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:182,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:26.050 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:26.051 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:182
2025-09-13 09:49:26.051 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:182,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:26.052 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:182,source_light_Type:B_SourceLightType
2025-09-13 09:49:26.052 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:182,source_light_Type:A_SourceLightType
2025-09-13 09:49:26.052 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：182,B_SourceLightType
2025-09-13 09:49:26.052 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：182,A_SourceLightType
2025-09-13 09:49:26.099 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:26.101 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":182,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_182_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:26.152 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:26.155 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":182,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_182_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:26.323 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;182/209,
2025-09-13 09:49:26.332 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:26.484 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:26.799 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:26
2025-09-13 09:49:26.817 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:26
2025-09-13 09:49:26.833 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 183
2025-09-13 09:49:26.833 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 183
2025-09-13 09:49:26.833 [Thd =196]  Info Default  开始扫描条带； [183/209]
2025-09-13 09:49:26.835 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:26.838 [Thd =20]  Info Default ***row:183, vectorBeginX:-16.356, vectorBeginY:-40.718, captureBeginX:-12.736, captureBeginY:-40.718, captureEndX:10.761, captureEndY:-40.718, vectorEndX:14.663, vectorEndY:-40.718
2025-09-13 09:49:26.838 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:26.839 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361811725634,EndPoint:-10.760693200147
2025-09-13 09:49:28.042 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:183
2025-09-13 09:49:28.043 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:183,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:28.043 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:28.043 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:183
2025-09-13 09:49:28.043 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:183,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:28.043 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:183,source_light_Type:B_SourceLightType
2025-09-13 09:49:28.043 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:183,source_light_Type:A_SourceLightType
2025-09-13 09:49:28.043 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：183,B_SourceLightType
2025-09-13 09:49:28.043 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：183,A_SourceLightType
2025-09-13 09:49:28.091 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:28.093 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":183,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_183_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:28.143 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:28.144 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":183,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_183_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:28.310 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;183/209,
2025-09-13 09:49:28.321 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:28.368 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:28.741 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 184
2025-09-13 09:49:28.741 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 184
2025-09-13 09:49:28.741 [Thd =38]  Info Default  开始扫描条带； [184/209]
2025-09-13 09:49:28.743 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:28.746 [Thd =20]  Info Default CaptureBeginX: 11.09750, CaptureBeginY:-41.14588, CaptureEndX:-12.39937, CaptureEndY:-41.14588, VectorBeginX:14.66318, VectorBeginY:-41.14588, VectorEndX:-16.35594, VectorEndY:-41.14588, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:28.746 [Thd =20]  Info Default ***row:184, vectorBeginX:14.663, vectorBeginY:-41.146, captureBeginX:11.098, captureBeginY:-41.146, captureEndX:-12.399, captureEndY:-41.146, vectorEndX:-16.356, vectorEndY:-41.146
2025-09-13 09:49:28.746 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:28.747 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975032271616,EndPoint:12.3993711455488
2025-09-13 09:49:29.946 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:184
2025-09-13 09:49:29.946 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:184,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:29.946 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:29.947 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:184
2025-09-13 09:49:29.947 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:184,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:29.947 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:184,source_light_Type:A_SourceLightType
2025-09-13 09:49:29.947 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:184,source_light_Type:B_SourceLightType
2025-09-13 09:49:29.947 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：184,A_SourceLightType
2025-09-13 09:49:29.947 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：184,B_SourceLightType
2025-09-13 09:49:29.995 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:29.996 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":184,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_184_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:30.048 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:30.050 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":184,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_184_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:30.098 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:30
2025-09-13 09:49:30.161 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:30
2025-09-13 09:49:30.220 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;184/209,
2025-09-13 09:49:30.240 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:30.456 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:30.805 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 185
2025-09-13 09:49:30.805 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 185
2025-09-13 09:49:30.805 [Thd =66]  Info Default  开始扫描条带； [185/209]
2025-09-13 09:49:30.807 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:30.809 [Thd =20]  Info Default ***row:185, vectorBeginX:-16.356, vectorBeginY:-41.573, captureBeginX:-12.736, captureBeginY:-41.573, captureEndX:10.761, captureEndY:-41.573, vectorEndX:14.663, vectorEndY:-41.573
2025-09-13 09:49:30.809 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:30.811 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361845905321,EndPoint:-10.7606897821783
2025-09-13 09:49:31.129 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:31
2025-09-13 09:49:31.147 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:31
2025-09-13 09:49:32.014 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:185
2025-09-13 09:49:32.014 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:185,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:32.014 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:32.014 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:185
2025-09-13 09:49:32.014 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:185,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:32.015 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:185,source_light_Type:A_SourceLightType
2025-09-13 09:49:32.015 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:185,source_light_Type:B_SourceLightType
2025-09-13 09:49:32.015 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：185,A_SourceLightType
2025-09-13 09:49:32.015 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：185,B_SourceLightType
2025-09-13 09:49:32.062 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:32.064 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":185,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_185_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:32.121 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:32.126 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":185,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_185_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:32.286 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;185/209,
2025-09-13 09:49:32.295 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:32.577 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:32.917 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 186
2025-09-13 09:49:32.917 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 186
2025-09-13 09:49:32.917 [Thd =73]  Info Default  开始扫描条带； [186/209]
2025-09-13 09:49:32.920 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:32.922 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-42.00097, CaptureEndX:-12.39937, CaptureEndY:-42.00097, VectorBeginX:14.66318, VectorBeginY:-42.00097, VectorEndX:-16.35594, VectorEndY:-42.00097, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:32.922 [Thd =20]  Info Default ***row:186, vectorBeginX:14.663, vectorBeginY:-42.001, captureBeginX:11.098, captureBeginY:-42.001, captureEndX:-12.399, captureEndY:-42.001, vectorEndX:-16.356, vectorEndY:-42.001
2025-09-13 09:49:32.922 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:32.923 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975065840525,EndPoint:12.3993677886579
2025-09-13 09:49:34.123 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:186
2025-09-13 09:49:34.123 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:186,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:34.123 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:34.125 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:186
2025-09-13 09:49:34.125 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:186,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:34.125 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:186,source_light_Type:A_SourceLightType
2025-09-13 09:49:34.125 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:186,source_light_Type:B_SourceLightType
2025-09-13 09:49:34.125 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：186,A_SourceLightType
2025-09-13 09:49:34.125 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：186,B_SourceLightType
2025-09-13 09:49:34.179 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:34.180 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":186,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_186_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:34.229 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:34.231 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":186,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_186_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:34.391 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;186/209,
2025-09-13 09:49:34.400 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:34.452 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:34.722 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:34
2025-09-13 09:49:34.739 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:34
2025-09-13 09:49:34.804 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 187
2025-09-13 09:49:34.804 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 187
2025-09-13 09:49:34.804 [Thd =219]  Info Default  开始扫描条带； [187/209]
2025-09-13 09:49:34.806 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:34.809 [Thd =20]  Info Default ***row:187, vectorBeginX:-16.356, vectorBeginY:-42.429, captureBeginX:-12.736, captureBeginY:-42.429, captureEndX:10.761, captureEndY:-42.429, vectorEndX:14.663, vectorEndY:-42.429
2025-09-13 09:49:34.809 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:34.810 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736180257036,EndPoint:-10.7606941156744
2025-09-13 09:49:36.011 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:187
2025-09-13 09:49:36.011 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:187,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:36.011 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:36.012 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:187
2025-09-13 09:49:36.012 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:187,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:36.012 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:187,source_light_Type:B_SourceLightType
2025-09-13 09:49:36.012 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:187,source_light_Type:A_SourceLightType
2025-09-13 09:49:36.012 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：187,B_SourceLightType
2025-09-13 09:49:36.012 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：187,A_SourceLightType
2025-09-13 09:49:36.075 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:36.076 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":187,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_187_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:36.125 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:36.126 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":187,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_187_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:36.279 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;187/209,
2025-09-13 09:49:36.288 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:36.329 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:36.678 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 188
2025-09-13 09:49:36.678 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 188
2025-09-13 09:49:36.678 [Thd =221]  Info Default  开始扫描条带； [188/209]
2025-09-13 09:49:36.681 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:36.684 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-42.85607, CaptureEndX:-12.39937, CaptureEndY:-42.85607, VectorBeginX:14.66319, VectorBeginY:-42.85607, VectorEndX:-16.35593, VectorEndY:-42.85607, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:36.684 [Thd =20]  Info Default ***row:188, vectorBeginX:14.663, vectorBeginY:-42.856, captureBeginX:11.098, captureBeginY:-42.856, captureEndX:-12.399, captureEndY:-42.856, vectorEndX:-16.356, vectorEndY:-42.856
2025-09-13 09:49:36.684 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:36.685 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975092696535,EndPoint:12.3993651030569
2025-09-13 09:49:36.914 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:36
2025-09-13 09:49:36.930 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:36
2025-09-13 09:49:37.884 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:188
2025-09-13 09:49:37.885 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:188,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:37.885 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:37.886 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:188
2025-09-13 09:49:37.886 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:188,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:37.886 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:188,source_light_Type:B_SourceLightType
2025-09-13 09:49:37.886 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:188,source_light_Type:A_SourceLightType
2025-09-13 09:49:37.886 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：188,B_SourceLightType
2025-09-13 09:49:37.886 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：188,A_SourceLightType
2025-09-13 09:49:37.931 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:37.933 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":188,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_188_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:37.985 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:37.988 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":188,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_188_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:38.072 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:38
2025-09-13 09:49:38.108 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:38
2025-09-13 09:49:38.155 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;188/209,
2025-09-13 09:49:38.164 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:38.275 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:38.624 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 189
2025-09-13 09:49:38.624 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 189
2025-09-13 09:49:38.624 [Thd =196]  Info Default  开始扫描条带； [189/209]
2025-09-13 09:49:38.627 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:38.629 [Thd =20]  Info Default ***row:189, vectorBeginX:-16.356, vectorBeginY:-43.284, captureBeginX:-12.736, captureBeginY:-43.284, captureEndX:10.761, captureEndY:-43.284, vectorEndX:14.663, vectorEndY:-43.284
2025-09-13 09:49:38.629 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:38.631 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361812946337,EndPoint:-10.7606930780767
2025-09-13 09:49:39.110 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:39
2025-09-13 09:49:39.140 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:39
2025-09-13 09:49:39.832 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:189
2025-09-13 09:49:39.832 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:39.832 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:39.834 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:189
2025-09-13 09:49:39.834 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:39.834 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:B_SourceLightType
2025-09-13 09:49:39.834 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:A_SourceLightType
2025-09-13 09:49:39.834 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,B_SourceLightType
2025-09-13 09:49:39.834 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,A_SourceLightType
2025-09-13 09:49:39.882 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:39.884 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_189_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:39.942 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:39.944 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_189_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:40.103 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;189/209,
2025-09-13 09:49:40.112 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:40.157 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:40.402 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:40
2025-09-13 09:49:40.450 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:40
2025-09-13 09:49:40.497 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 190
2025-09-13 09:49:40.497 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 190
2025-09-13 09:49:40.497 [Thd =219]  Info Default  开始扫描条带； [190/209]
2025-09-13 09:49:40.499 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:40.518 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-43.71117, CaptureEndX:-12.39937, CaptureEndY:-43.71117, VectorBeginX:14.66319, VectorBeginY:-43.71117, VectorEndX:-16.35593, VectorEndY:-43.71117, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:40.518 [Thd =20]  Info Default ***row:190, vectorBeginX:14.663, vectorBeginY:-43.711, captureBeginX:11.098, captureBeginY:-43.711, captureEndX:-12.399, captureEndY:-43.711, vectorEndX:-16.356, vectorEndY:-43.711
2025-09-13 09:49:40.518 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:40.519 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975089034296,EndPoint:12.3993654692808
2025-09-13 09:49:41.719 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:190
2025-09-13 09:49:41.719 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:41.719 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:41.720 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:190
2025-09-13 09:49:41.721 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:41.721 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:A_SourceLightType
2025-09-13 09:49:41.721 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,A_SourceLightType
2025-09-13 09:49:41.721 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,B_SourceLightType
2025-09-13 09:49:41.721 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:B_SourceLightType
2025-09-13 09:49:41.770 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:41.772 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_190_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:41.823 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:41.825 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_190_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:41.987 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;190/209,
2025-09-13 09:49:41.996 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:42.131 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:42.483 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 191
2025-09-13 09:49:42.483 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 191
2025-09-13 09:49:42.483 [Thd =222]  Info Default  开始扫描条带； [191/209]
2025-09-13 09:49:42.485 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:42.488 [Thd =20]  Info Default ***row:191, vectorBeginX:-16.356, vectorBeginY:-44.139, captureBeginX:-12.736, captureBeginY:-44.139, captureEndX:10.761, captureEndY:-44.139, vectorEndX:14.663, vectorEndY:-44.139
2025-09-13 09:49:42.488 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:42.490 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361761676806,EndPoint:-10.7606982050298
2025-09-13 09:49:43.084 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:43
2025-09-13 09:49:43.154 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:43
2025-09-13 09:49:43.691 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:191
2025-09-13 09:49:43.691 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:43.691 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:43.693 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:191
2025-09-13 09:49:43.693 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:43.693 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:A_SourceLightType
2025-09-13 09:49:43.693 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,A_SourceLightType
2025-09-13 09:49:43.693 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,B_SourceLightType
2025-09-13 09:49:43.693 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:B_SourceLightType
2025-09-13 09:49:43.743 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:43.745 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_191_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:43.794 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:43.796 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_191_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:43.963 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;191/209,
2025-09-13 09:49:43.972 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:44.156 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:44.507 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 192
2025-09-13 09:49:44.507 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 192
2025-09-13 09:49:44.507 [Thd =196]  Info Default  开始扫描条带； [192/209]
2025-09-13 09:49:44.511 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:44.514 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-44.56626, CaptureEndX:-12.39936, CaptureEndY:-44.56626, VectorBeginX:14.66319, VectorBeginY:-44.56626, VectorEndX:-16.35593, VectorEndY:-44.56626, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:44.514 [Thd =20]  Info Default ***row:192, vectorBeginX:14.663, vectorBeginY:-44.566, captureBeginX:11.098, captureBeginY:-44.566, captureEndX:-12.399, captureEndY:-44.566, vectorEndX:-16.356, vectorEndY:-44.566
2025-09-13 09:49:44.514 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:44.515 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975117111109,EndPoint:12.3993626615995
2025-09-13 09:49:45.713 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:192
2025-09-13 09:49:45.713 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:45.713 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:45.715 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:192
2025-09-13 09:49:45.715 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:45.715 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:A_SourceLightType
2025-09-13 09:49:45.715 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:B_SourceLightType
2025-09-13 09:49:45.715 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,A_SourceLightType
2025-09-13 09:49:45.715 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,B_SourceLightType
2025-09-13 09:49:45.763 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:45.765 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_192_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:45.821 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:45.823 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_192_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:45.982 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;192/209,
2025-09-13 09:49:45.991 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:46.129 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:46.479 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 193
2025-09-13 09:49:46.479 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 193
2025-09-13 09:49:46.479 [Thd =65]  Info Default  开始扫描条带； [193/209]
2025-09-13 09:49:46.481 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:46.483 [Thd =20]  Info Default ***row:193, vectorBeginX:-16.356, vectorBeginY:-44.994, captureBeginX:-12.736, captureBeginY:-44.994, captureEndX:10.761, captureEndY:-44.994, vectorEndX:14.663, vectorEndY:-44.994
2025-09-13 09:49:46.483 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:46.485 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361762897509,EndPoint:-10.7606980829595
2025-09-13 09:49:46.666 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:46
2025-09-13 09:49:46.690 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:46
2025-09-13 09:49:47.687 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:193
2025-09-13 09:49:47.687 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:47.687 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:47.688 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:193
2025-09-13 09:49:47.688 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:47.688 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:B_SourceLightType
2025-09-13 09:49:47.688 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,B_SourceLightType
2025-09-13 09:49:47.688 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,A_SourceLightType
2025-09-13 09:49:47.688 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:A_SourceLightType
2025-09-13 09:49:47.738 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:47.740 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_193_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:47.790 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:47.791 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_193_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:47.953 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;193/209,
2025-09-13 09:49:47.963 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:48.012 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:48.351 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 194
2025-09-13 09:49:48.351 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 194
2025-09-13 09:49:48.351 [Thd =222]  Info Default  开始扫描条带； [194/209]
2025-09-13 09:49:48.354 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:48.360 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-45.42136, CaptureEndX:-12.39936, CaptureEndY:-45.42136, VectorBeginX:14.66319, VectorBeginY:-45.42136, VectorEndX:-16.35593, VectorEndY:-45.42136, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:48.361 [Thd =20]  Info Default ***row:194, vectorBeginX:14.663, vectorBeginY:-45.421, captureBeginX:11.098, captureBeginY:-45.421, captureEndX:-12.399, captureEndY:-45.421, vectorEndX:-16.356, vectorEndY:-45.421
2025-09-13 09:49:48.361 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:48.362 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975109786875,EndPoint:12.3993633940229
2025-09-13 09:49:48.840 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:48
2025-09-13 09:49:48.931 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:48
2025-09-13 09:49:49.563 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:194
2025-09-13 09:49:49.575 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:49.575 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:49.575 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:194
2025-09-13 09:49:49.575 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:49.576 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:B_SourceLightType
2025-09-13 09:49:49.576 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:A_SourceLightType
2025-09-13 09:49:49.576 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,B_SourceLightType
2025-09-13 09:49:49.576 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,A_SourceLightType
2025-09-13 09:49:49.627 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:49.628 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_194_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:49.680 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:49.681 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_194_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:49.828 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;194/209,
2025-09-13 09:49:49.837 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:49.880 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:50.203 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:50
2025-09-13 09:49:50.221 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 195
2025-09-13 09:49:50.221 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 195
2025-09-13 09:49:50.221 [Thd =38]  Info Default  开始扫描条带； [195/209]
2025-09-13 09:49:50.223 [Thd =20]  Info Default ScanDirection is Negative
2025-09-13 09:49:50.230 [Thd =20]  Info Default ***row:195, vectorBeginX:-16.356, vectorBeginY:-45.849, captureBeginX:-12.736, captureBeginY:-45.849, captureEndX:10.761, captureEndY:-45.849, vectorEndX:14.663, vectorEndY:-45.849
2025-09-13 09:49:50.230 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:50.231 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361805622118,EndPoint:-10.7606938104986
2025-09-13 09:49:50.254 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:50
2025-09-13 09:49:50.869 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:50
2025-09-13 09:49:50.893 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:50
2025-09-13 09:49:51.433 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:195
2025-09-13 09:49:51.433 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:51.433 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:51.435 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:195
2025-09-13 09:49:51.435 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:51.435 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:A_SourceLightType
2025-09-13 09:49:51.435 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:B_SourceLightType
2025-09-13 09:49:51.435 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,A_SourceLightType
2025-09-13 09:49:51.435 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,B_SourceLightType
2025-09-13 09:49:51.482 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:51.484 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_195_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:51.538 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:51.540 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_195_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:51.700 [Thd =20]  Info Default Strip scanning complete, waiting for collection... ;195/209,
2025-09-13 09:49:51.708 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:49:51.830 [Thd =20]  Info Default singleAixsScan Testing 2
2025-09-13 09:49:51.979 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:49:51
2025-09-13 09:49:52.009 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:49:52
2025-09-13 09:49:52.180 [Thd =20]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 196
2025-09-13 09:49:52.180 [Thd =20]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 196
2025-09-13 09:49:52.180 [Thd =57]  Info Default  开始扫描条带； [196/209]
2025-09-13 09:49:52.182 [Thd =20]  Info Default ScanDirection is Positive
2025-09-13 09:49:52.184 [Thd =20]  Info Default CaptureBeginX: 11.09751, CaptureBeginY:-46.27647, CaptureEndX:-12.39937, CaptureEndY:-46.27647, VectorBeginX:14.66318, VectorBeginY:-46.27647, VectorEndX:-16.35594, VectorEndY:-46.27647, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:49:52.185 [Thd =20]  Info Default ***row:196, vectorBeginX:14.663, vectorBeginY:-46.276, captureBeginX:11.098, captureBeginY:-46.276, captureEndX:-12.399, captureEndY:-46.276, vectorEndX:-16.356, vectorEndY:-46.276
2025-09-13 09:49:52.185 [Thd =20]  Info Default m_focusMapMode：0
2025-09-13 09:49:52.186 [Thd =20]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975050582239,EndPoint:12.3993693144865
2025-09-13 09:49:52.456 [Thd =1]  Info Default VerifyModule.StopInspect() Stop !
2025-09-13 09:49:52.458 [Thd =1]  Info Default InspectProxy.Stop, InspectRuntimeInfo Thread health：
No memory resources：0001-01-01 00:00:00 
Excessive striping：0001-01-01 00:00:00 
 
Camera capture：
Camera capture received：2025-09-13 09:49:51 
no received resource：0001-01-01 00:00:00 
 
result handles thread health：
Result processing time：2025-09-13 09:49:52 
The number of images processed：169260/181412 
 
algorithm returns ：
MCU returns time：2025-09-13 09:49:51 
MCUSDK ReceiveCount：8580 
Effect return time：2025-09-13 09:21:11 
 return time：2025-09-13 09:49:51 
return count：8580 
max begin_pos：169243 
real_batch sum：169260 
 
ThreadPool：
Runing：179 , Available：193 ,I/O：200 

2025-09-13 09:49:53.385 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:196
2025-09-13 09:49:53.386 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:53.386 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:49:53.387 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:196
2025-09-13 09:49:53.387 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:49:53.387 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:A_SourceLightType
2025-09-13 09:49:53.387 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:B_SourceLightType
2025-09-13 09:49:53.387 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,A_SourceLightType
2025-09-13 09:49:53.387 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,B_SourceLightType
2025-09-13 09:49:53.410 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Stopping
2025-09-13 09:49:53.410 [Thd =1]  Info Default LightState 000:last:Inspecting,now:InspectError
2025-09-13 09:49:53.414 [Thd =1]  Info Default LightState 222:InspectError
2025-09-13 09:49:53.414 [Thd =1]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:49:53.415 [Thd =1]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:49:53.415 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Stopping
2025-09-13 09:49:53.415 [Thd =1]  Info Default LightState 000:last:InspectError,now:InspectError
2025-09-13 09:49:53.415 [Thd =1]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:49:53.416 [Thd =1]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:49:53.434 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:49:53.437 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_196_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:53.450 [Thd =1]  Info Default AutoWorkerHelper.Stop() Abort() Complate 
2025-09-13 09:49:53.504 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:49:53.505 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_196_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:49:53.619 [Thd =57]  Info Default 结果处理全部完成！
2025-09-13 09:49:53.619 [Thd =46]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Stopped
2025-09-13 09:49:53.619 [Thd =46]  Info Default LightState 000:last:InspectError,now:InspectError
2025-09-13 09:49:53.619 [Thd =46]  Info Default PLCKeyence:SetSystemStatus:WR DM0 1

2025-09-13 09:49:53.620 [Thd =46]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:49:53.642 [Thd =20]  Error Detect thread forced stop!{0} 正在中止线程。
2025-09-13 09:49:53.900 [Thd =20]  Info Default ***********Task finished.**************
2025-09-13 09:49:53.901 [Thd =20]  Info Default Stop the detection thread;
2025-09-13 09:49:53.926 [Thd =112]  Warn Default 还原光源最大功率
2025-09-13 09:49:53.926 [Thd =73]  Info Default LaserLamp MaxPower:300
2025-09-13 09:49:54.199 [Thd =36]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:49:54.928 [Thd =73]  Info Default OpenLamp Transmission
2025-09-13 09:49:55.730 [Thd =136]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:49:55.966 [Thd =46]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-09-13 09:49:55.966 [Thd =46]  Info Default *********Reset2**********
2025-09-13 09:49:55.966 [Thd =51]  Info Default 检测完成！
2025-09-13 09:49:55.966 [Thd =73]  Info Default CloseLamp Reflection
2025-09-13 09:49:55.967 [Thd =75]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-09-13 09:49:57.001 [Thd =219]  Info Default LaserLamp MaxPower:300,currentPower:180
2025-09-13 09:49:58.280 [Thd =1]  Info Default Stop End!
2025-09-13 09:49:58.280 [Thd =1]  Info Default release timer --begin
2025-09-13 09:49:58.634 [Thd =222]  Warn Default 已切换到面阵光路
2025-09-13 09:49:58.828 [Thd =36]  Info Default QuerySubstrateMode Area OK 
2025-09-13 09:49:58.828 [Thd =73]  Info Default 已切换到面阵聚焦模式
2025-09-13 09:49:59.002 [Thd =219]  Error Default SyncSend recv cmd timeout
2025-09-13 09:49:59.282 [Thd =1]  Info Default release timer --end
2025-09-13 09:49:59.282 [Thd =219]  Warn Default 还原光源最大功率
2025-09-13 09:49:59.282 [Thd =66]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:49:59.282 [Thd =65]  Info Default LaserLamp MaxPower:300
2025-09-13 09:49:59.282 [Thd =221]  Warn Default 已切换到面阵光路
2025-09-13 09:50:00.282 [Thd =65]  Info Default OpenLamp Transmission
2025-09-13 09:50:01.084 [Thd =38]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:50:01.283 [Thd =65]  Info Default CloseLamp Reflection
2025-09-13 09:50:02.831 [Thd =36]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:50:02.831 [Thd =172]  Info Default 聚焦Track已关闭
2025-09-13 09:50:02.831 [Thd =20]  Info Default Finally Over！
2025-09-13 09:50:02.835 [Thd =20]  Info Default Inspection:End Memory usage:6114.906MB VirtualMemorySize:142.5 GB
2025-09-13 09:50:02.835 [Thd =20]  Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over!
2025-09-13 09:50:03.907 [Thd =66]  Info Default QuerySubstrateMode Area OK 
2025-09-13 09:50:03.907 [Thd =131]  Info Default 已切换到面阵聚焦模式
2025-09-13 09:50:04.991 [Thd =75]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-09-13 09:50:07.910 [Thd =66]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:50:07.910 [Thd =65]  Info Default 聚焦Track已关闭
2025-09-13 09:50:07.915 [Thd =1]  Info Default Inspection:Stop Memory usage:5128.648MB VirtualMemorySize:142 GB
2025-09-13 09:50:07.917 [Thd =51]  Info Default Chuck vacuum close
2025-09-13 09:50:08.918 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:50:08.918 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:1978
2025-09-13 09:50:08.919 [Thd =180]  Info Default Chuck vacuum close
2025-09-13 09:50:09.920 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:50:09.920 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:1978
2025-09-13 09:50:09.921 [Thd =73]  Info Default Chuck vacuum close
2025-09-13 09:50:10.922 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:50:10.922 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopped! CurTaskName:1978
2025-09-13 09:50:10.922 [Thd =51]  Info Default Inspection Stop!
2025-09-13 09:50:11.733 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:50:11.738 [Thd =131]  Error Default MaskDefectPanel::GenerateTxtReport(): No Defect in this report:.1978
2025-09-13 09:50:29.152 [Thd =1]  Info Default LightState 000:last:InspectError,now:StormInit
2025-09-13 09:50:29.155 [Thd =1]  Info Default LightState 222:StormInit
2025-09-13 09:50:29.155 [Thd =1]  Info Default Licensed has techLevel count:2
2025-09-13 09:50:29.155 [Thd =1]  Info Default New INI File！st_core_P200_BIM.ini
2025-09-13 09:50:29.251 [Thd =206]  Info Default Start [1/1]
2025-09-13 09:50:29.252 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:104
2025-09-13 09:50:29.252 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-09-13 09:50:29.259 [Thd =1]  Info Default Inspection:Before Memory usage:5010.211MB VirtualMemorySize:141.8 GB
2025-09-13 09:50:29.259 [Thd =38]  Info Default 开始检查！
2025-09-13 09:50:29.417 [Thd =1]  Info Default Computed strip 104 Starting point GDS coordinates，StarPoint.X:52392661,68723239 ，GDSStep:2016，stripNo:104，PixelX_line:0.212071778 
2025-09-13 09:50:29.417 [Thd =112]  Info Default 初始化插件
2025-09-13 09:50:29.417 [Thd =136]  Info Default 初始化DB目录
2025-09-13 09:50:29.417 [Thd =65]  Info Default TDICamera1:Current:TDIStage：TDI120，Target：TDI120,CurrentSize:2048,2048
2025-09-13 09:50:29.417 [Thd =65]  Info Default TDICamera1:Camera size no change,do not set
2025-09-13 09:50:29.417 [Thd =73]  Info Default 设置 TDI 相机参数...
2025-09-13 09:50:29.417 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-09-13 09:50:29.417 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-09-13 09:50:29.417 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-09-13 09:50:29.418 [Thd =213]  Info Default TDICamera0:Current:TDIStage：TDI256，Target：TDI256,CurrentSize:2048,2048
2025-09-13 09:50:29.418 [Thd =213]  Info Default TDICamera0:Camera size no change,do not set
2025-09-13 09:50:29.539 [Thd =57]  Info Default 初始化DPU服务器！
2025-09-13 09:50:29.539 [Thd =36]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-09-13 09:50:29.815 [Thd =1]  Info Default LightState 000:last:StormInit,now:StormInit
2025-09-13 09:50:30.855 [Thd =1]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:50:30.871 [Thd =65]  Info Default TDICamera1:TriggerMode is On,do not set
2025-09-13 09:50:31.374 [Thd =213]  Info Default TDICamera0:TriggerMode is On,do not set
2025-09-13 09:50:38.073 [Thd =36]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-09-13 09:50:38.092 [Thd =1]  Info Default Register inspect event！
2025-09-13 09:50:38.129 [Thd =1]  Info Default initial*****Light_intensity:40, min:10, max:220
2025-09-13 09:50:38.129 [Thd =19]  Info Default 初始化检测数据
2025-09-13 09:50:38.129 [Thd =1]  Info Default ***gds clip thread num is 6
2025-09-13 09:50:38.129 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-09-13 09:50:38.129 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 0, reference point GDS_Y: 0, reference point Stage_X: -58.0185471554495, reference point Stage_Y: 45.6395234027315, starting point GDS_X: 7928844, starting point GDS_Y: 68723239
2025-09-13 09:50:38.129 [Thd =172]  Info Default m_start_strip_no:104
2025-09-13 09:50:38.129 [Thd =172]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-09-13 09:50:38.129 [Thd =172]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":null,"m_layerMode":0,"m_layerNo":0,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212071778,"m_pixelSizeY":0.212071778,"m_pixelSizeX_Len":0.212071778,"m_pixelSizeY_Len":0.212071778,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":836,"m_col":217,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":7928844,"m_beginY":68723239,"m_endX":97280927,"m_endY":45980727,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":4,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":1263,"m_AL":1,"m_lcol":211,"m_tolerance_mode":0,"m_x_tolerance":0.0,"m_y_tolerance":0.0,"m_CD_Defect_resolution":0.5,"m_pinhole_Defect_resolution":0.5,"m_degreeThrd":44,"m_cornerThrd":0,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":null,"m_bUseDP":false,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":209,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-09-13\\rcp_SL_1/","m_line_camera_ud_offset":-1,"m_line_camera_lr_offset":2,"m_start_strip_no":104,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-09-13\\rcp_SL_1/","m_optical_head_total":0,"m_inner_round":0.0,"m_optical_head_id":0,"m_outer_round":0.0,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":0.0,"m_CD2_Defect_resolution":0.5,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,214,4,0,1130102784,1065353216,1065353216,6,40,0],"m_R_collect":[200,202,44,0,1128792064,1065353216,1065353216,10752,2,1094713344],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":1,"m_line_camera_ud_offset_f":-1.45,"m_mask_inspection_mode_ex":4,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":1,"m_Edge_2_thrd_mode":1,"m_Gray_thrd_mode":1,"m_line_camera_lr_offset_f":2.05,"SL_Edge_switch":2,"SL_Edge2_switch":2,"crDrop_switch":2,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":0.0,"m_y_tolerance_R":0.0,"m_inner_round_R":0.0,"m_outer_round_R":0.0,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-0.65,"lr_decimal_right":1.3,"m_simple_gray_defect_kernel":0,"m_cs_pitchs":null,"m_OPCplate":false,"m_dilation_value":2.5}
2025-09-13 09:50:38.130 [Thd =172]  Info Default m_line_camera_cols:53
2025-09-13 09:50:38.130 [Thd =172]  Info Default AllocHGlobal img mem pic_count:53, img_w:2032, img_h:2048
2025-09-13 09:50:38.130 [Thd =172]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:SLMODE
2025-09-13 09:50:38.133 [Thd =172]  Info Default Set distortion correction parameters End
2025-09-13 09:50:38.133 [Thd =172]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):836,pic_count(Grid2.Cols):211,pic_count_pack(Grid.Cols):217,max_batch:20,mode:4,m_channel:4 
2025-09-13 09:50:38.234 [Thd =172]  Info Default InitDie2DBRes Success!!!!
2025-09-13 09:50:38.234 [Thd =1]  Info Default Successful alignment！
2025-09-13 09:50:38.235 [Thd =38]  Info Default 对准完成！
2025-09-13 09:50:38.235 [Thd =51]  Info Default 稍等！设置相机参数中
2025-09-13 09:50:38.235 [Thd =1]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:50:38.235 [Thd =57]  Info Default 移动到起始点位
2025-09-13 09:50:39.236 [Thd =66]  Warn Default 标记偏移点X:0，Y:0
2025-09-13 09:50:39.236 [Thd =1]  Info Default Move to the inspect start point，Starting point coordinates：X:10.7046918445505,Y:-6.75313759726848,OffSet.X:0,OffSet.Y:0
2025-09-13 09:50:41.359 [Thd =136]  Info Default Zposition:0
2025-09-13 09:50:44.054 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Running
2025-09-13 09:50:44.054 [Thd =1]  Info Default LightState 000:last:StormInit,now:Inspecting
2025-09-13 09:50:44.056 [Thd =1]  Info Default LightState 222:Inspecting
2025-09-13 09:50:44.056 [Thd =1]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:50:44.057 [Thd =1]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:50:44.057 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() Running ! 
2025-09-13 09:50:44.057 [Thd =1]  Info Default AutoWorderHelper:StartWorker.
2025-09-13 09:50:44.057 [Thd =1]  Info Default AutoWorderHelper:SaveTask2DB.
2025-09-13 09:50:44.347 [Thd =1]  Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 1979
2025-09-13 09:50:44.347 [Thd =1]  Info Default AutoWorderHelper:InitInspectingData.
2025-09-13 09:50:44.347 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0
2025-09-13 09:50:44.348 [Thd =46]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Running
2025-09-13 09:50:44.348 [Thd =46]  Info Default LightState 000:last:Inspecting,now:Inspecting
2025-09-13 09:50:44.348 [Thd =46]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:50:44.348 [Thd =221]  Info Default 结果处理线程启动！
2025-09-13 09:50:44.348 [Thd =46]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:50:44.348 [Thd =65]  Info Default 检测线程启动！
2025-09-13 09:50:44.348 [Thd =46]  Info Default defectData.RecivePicCount:0
2025-09-13 09:50:44.348 [Thd =46]  Info Default start inspect task pic_count of one strip:53, big_strip_count:16. 
2025-09-13 09:50:44.349 [Thd =46]  Info Default m_StagePixelSizeX=0.212071778， m_StagePixelSizeY=0.212071778.
2025-09-13 09:50:44.349 [Thd =46]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-09-13 09:50:44.349 [Thd =46]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-09-13 09:50:44.349 [Thd =46]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-09-13 09:50:44.349 [Thd =46]  Info Default BaseScanObjectLine:------------------
2025-09-13 09:50:44.349 [Thd =46]  Info Default BaseScanObjectLine:*****************
2025-09-13 09:50:44.349 [Thd =46]  Info Default BaseScanObjectLine:0000000000000000
2025-09-13 09:50:44.349 [Thd =46]  Info Default scaleX: 0.999968571, scaleY:1
2025-09-13 09:50:44.349 [Thd =46]  Info Default Orth_Y_BeforR: 0,StageScaleX:0.999968571,Y:1
2025-09-13 09:50:44.349 [Thd =46]  Info Default LengthOfAccelerationAndDeceleration: 4
2025-09-13 09:50:44.351 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:1979
2025-09-13 09:50:44.352 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:1979
2025-09-13 09:50:48.351 [Thd =46]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:50:48.351 [Thd =38]  Info Default 聚焦Track已关闭
2025-09-13 09:50:48.351 [Thd =136]  Info Default 正在切换线阵相机光路
2025-09-13 09:50:53.056 [Thd =46]  Info Default ChangeLightPath: True!
2025-09-13 09:50:53.056 [Thd =46]  Info Default SnakeScanLine: Paddle Rotate angle is 0 !
2025-09-13 09:50:54.875 [Thd =46]  Info Default InspectOverlayX: 16, InspectOverlayY:16
2025-09-13 09:50:54.881 [Thd =172]  Warn Default 检测光源最大功率(mw):300mw
2025-09-13 09:50:54.881 [Thd =46]  Info Default SetMaxPower:300
2025-09-13 09:50:55.881 [Thd =46]  Info Default OpenLamp Transmission
2025-09-13 09:50:55.881 [Thd =213]  Info Default 正在打开透射、反射光源，亮度 40%
2025-09-13 09:50:56.683 [Thd =172]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:50:56.883 [Thd =46]  Info Default OpenLamp Reflection
2025-09-13 09:50:57.903 [Thd =65]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-09-13 09:50:58.686 [Thd =46]  Info Default PolarizationBaffleControl False: 2!
2025-09-13 09:50:58.686 [Thd =180]  Info Default 正在启用实时聚焦
2025-09-13 09:50:58.708 [Thd =46]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:50:59.904 [Thd =65]  Error Default SyncSend recv cmd timeout
2025-09-13 09:51:01.214 [Thd =46]  Info Default QuerySubstrateMode Line OK 
2025-09-13 09:51:01.214 [Thd =66]  Info Default 已切换到线阵聚焦模式
2025-09-13 09:51:02.215 [Thd =136]  Info Default 正在设置扫描控制参数
2025-09-13 09:51:02.215 [Thd =46]  Info Default GetParameter: stepCompX is 0.000212071778
2025-09-13 09:51:03.102 [Thd =46]  Info Default Allocate resources!
2025-09-13 09:51:03.102 [Thd =46]  Info Default GPU num is 1!
2025-09-13 09:51:07.105 [Thd =46]  Info Default SetFocusTrack OpenTrack OK 
2025-09-13 09:51:07.105 [Thd =196]  Info Default 聚焦Track已开启
2025-09-13 09:51:07.105 [Thd =46]  Info Default Start scanning; Start strip number: 104, total strip number: 16
2025-09-13 09:51:07.105 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 0
2025-09-13 09:51:07.105 [Thd =196]  Info Default  开始扫描条带； [0/16]
2025-09-13 09:51:07.107 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:07.109 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:-6.94082, CaptureEndX:-12.39934, CaptureEndY:-6.94082, VectorBeginX:14.66321, VectorBeginY:-6.94082, VectorEndX:-16.35591, VectorEndY:-6.94082, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:07.109 [Thd =46]  Info Default ***row:0, vectorBeginX:14.663, vectorBeginY:-6.941, captureBeginX:11.098, captureBeginY:-6.941, captureEndX:-12.399, captureEndY:-6.941, vectorEndX:-16.356, vectorEndY:-6.941
2025-09-13 09:51:07.109 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:07.111 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975333178018,EndPoint:12.3993410549086
2025-09-13 09:51:08.310 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:104
2025-09-13 09:51:08.311 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:08.311 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:08.312 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:104
2025-09-13 09:51:08.312 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:08.312 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:A_SourceLightType
2025-09-13 09:51:08.312 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:B_SourceLightType
2025-09-13 09:51:08.312 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,A_SourceLightType
2025-09-13 09:51:08.312 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,B_SourceLightType
2025-09-13 09:51:08.359 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:08.380 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_104_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:08.429 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:08.431 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_104_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:08.575 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;0/16,
2025-09-13 09:51:08.584 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:08.670 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:09.019 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 1
2025-09-13 09:51:09.019 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 1
2025-09-13 09:51:09.019 [Thd =57]  Info Default  开始扫描条带； [1/16]
2025-09-13 09:51:09.022 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:09.025 [Thd =46]  Info Default ***row:1, vectorBeginX:-16.356, vectorBeginY:-7.368, captureBeginX:-12.736, captureBeginY:-7.368, captureEndX:10.761, captureEndY:-7.368, vectorEndX:14.663, vectorEndY:-7.368
2025-09-13 09:51:09.025 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:09.026 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361543170946,EndPoint:-10.7607200556158
2025-09-13 09:51:10.229 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:105
2025-09-13 09:51:10.230 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:10.230 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:10.230 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:105
2025-09-13 09:51:10.230 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:10.230 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:A_SourceLightType
2025-09-13 09:51:10.230 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,A_SourceLightType
2025-09-13 09:51:10.230 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,B_SourceLightType
2025-09-13 09:51:10.230 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:B_SourceLightType
2025-09-13 09:51:10.276 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:10.296 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_105_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:10.345 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:10.347 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_105_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:10.494 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;1/16,
2025-09-13 09:51:10.503 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:10.546 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:10.897 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 2
2025-09-13 09:51:10.897 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 2
2025-09-13 09:51:10.897 [Thd =196]  Info Default  开始扫描条带； [2/16]
2025-09-13 09:51:10.899 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:10.902 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:-7.79591, CaptureEndX:-12.39934, CaptureEndY:-7.79591, VectorBeginX:14.66321, VectorBeginY:-7.79591, VectorEndX:-16.35591, VectorEndY:-7.79591, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:10.902 [Thd =46]  Info Default ***row:2, vectorBeginX:14.663, vectorBeginY:-7.796, captureBeginX:11.098, captureBeginY:-7.796, captureEndX:-12.399, captureEndY:-7.796, vectorEndX:-16.356, vectorEndY:-7.796
2025-09-13 09:51:10.902 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:10.904 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975300219309,EndPoint:12.3993443507795
2025-09-13 09:51:12.103 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:106
2025-09-13 09:51:12.103 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:12.103 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:12.104 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:106
2025-09-13 09:51:12.104 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:12.104 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:A_SourceLightType
2025-09-13 09:51:12.104 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:B_SourceLightType
2025-09-13 09:51:12.104 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,A_SourceLightType
2025-09-13 09:51:12.104 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,B_SourceLightType
2025-09-13 09:51:12.157 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:12.158 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_106_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:12.204 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:12.206 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_106_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:12.372 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;2/16,
2025-09-13 09:51:12.381 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:12.422 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:12.773 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 3
2025-09-13 09:51:12.773 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 3
2025-09-13 09:51:12.773 [Thd =65]  Info Default  开始扫描条带； [3/16]
2025-09-13 09:51:12.775 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:12.778 [Thd =46]  Info Default ***row:3, vectorBeginX:-16.356, vectorBeginY:-8.223, captureBeginX:-12.736, captureBeginY:-8.223, captureEndX:10.761, captureEndY:-8.223, vectorEndX:14.663, vectorEndY:-8.223
2025-09-13 09:51:12.778 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:12.779 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361554767626,EndPoint:-10.7607188959478
2025-09-13 09:51:13.983 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:107
2025-09-13 09:51:13.983 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:13.983 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:13.984 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:107
2025-09-13 09:51:13.984 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:13.984 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:A_SourceLightType
2025-09-13 09:51:13.984 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:B_SourceLightType
2025-09-13 09:51:13.984 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,A_SourceLightType
2025-09-13 09:51:13.984 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,B_SourceLightType
2025-09-13 09:51:14.032 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:14.034 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_107_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:14.081 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:14.083 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_107_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:14.244 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;3/16,
2025-09-13 09:51:14.253 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:14.297 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:14.648 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 4
2025-09-13 09:51:14.648 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 4
2025-09-13 09:51:14.648 [Thd =65]  Info Default  开始扫描条带； [4/16]
2025-09-13 09:51:14.650 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:14.653 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:-8.65100, CaptureEndX:-12.39934, CaptureEndY:-8.65100, VectorBeginX:14.66321, VectorBeginY:-8.65100, VectorEndX:-16.35590, VectorEndY:-8.65100, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:14.653 [Thd =46]  Info Default ***row:4, vectorBeginX:14.663, vectorBeginY:-8.651, captureBeginX:11.098, captureBeginY:-8.651, captureEndX:-12.399, captureEndY:-8.651, vectorEndX:-16.356, vectorEndY:-8.651
2025-09-13 09:51:14.653 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:14.654 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975375902758,EndPoint:12.3993367824346
2025-09-13 09:51:14.882 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:14
2025-09-13 09:51:14.900 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:14
2025-09-13 09:51:15.402 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:15
2025-09-13 09:51:15.423 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:15
2025-09-13 09:51:15.853 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:108
2025-09-13 09:51:15.854 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:15.854 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:15.855 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:108
2025-09-13 09:51:15.855 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:15.855 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:A_SourceLightType
2025-09-13 09:51:15.855 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,A_SourceLightType
2025-09-13 09:51:15.855 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,B_SourceLightType
2025-09-13 09:51:15.855 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:B_SourceLightType
2025-09-13 09:51:15.904 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:15.907 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_108_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:15.958 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:15.960 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_108_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:16.118 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;4/16,
2025-09-13 09:51:16.127 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:16.284 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:16.633 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 5
2025-09-13 09:51:16.633 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 5
2025-09-13 09:51:16.633 [Thd =36]  Info Default  开始扫描条带； [5/16]
2025-09-13 09:51:16.635 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:16.638 [Thd =46]  Info Default ***row:5, vectorBeginX:-16.356, vectorBeginY:-9.079, captureBeginX:-12.736, captureBeginY:-9.079, captureEndX:10.761, captureEndY:-9.079, vectorEndX:14.663, vectorEndY:-9.079
2025-09-13 09:51:16.638 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:16.639 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361487018602,EndPoint:-10.7607256708502
2025-09-13 09:51:17.426 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:17
2025-09-13 09:51:17.445 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:17
2025-09-13 09:51:17.445 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:17
2025-09-13 09:51:17.463 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:17
2025-09-13 09:51:17.841 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:109
2025-09-13 09:51:17.841 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:17.841 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:17.842 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:109
2025-09-13 09:51:17.842 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:17.842 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:B_SourceLightType
2025-09-13 09:51:17.842 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:A_SourceLightType
2025-09-13 09:51:17.842 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,B_SourceLightType
2025-09-13 09:51:17.842 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,A_SourceLightType
2025-09-13 09:51:17.889 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:17.891 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_109_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:17.941 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:17.943 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_109_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:18.105 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;5/16,
2025-09-13 09:51:18.114 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:18.160 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:18.511 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 6
2025-09-13 09:51:18.511 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 6
2025-09-13 09:51:18.511 [Thd =180]  Info Default  开始扫描条带； [6/16]
2025-09-13 09:51:18.513 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:18.516 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:-9.50610, CaptureEndX:-12.39934, CaptureEndY:-9.50610, VectorBeginX:14.66321, VectorBeginY:-9.50610, VectorEndX:-16.35591, VectorEndY:-9.50610, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:18.516 [Thd =46]  Info Default ***row:6, vectorBeginX:14.663, vectorBeginY:-9.506, captureBeginX:11.098, captureBeginY:-9.506, captureEndX:-12.399, captureEndY:-9.506, vectorEndX:-16.356, vectorEndY:-9.506
2025-09-13 09:51:18.516 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:18.517 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975366748331,EndPoint:12.3993376978773
2025-09-13 09:51:19.717 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:110
2025-09-13 09:51:19.717 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:19.717 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:19.717 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:110
2025-09-13 09:51:19.717 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:19.717 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:A_SourceLightType
2025-09-13 09:51:19.718 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:B_SourceLightType
2025-09-13 09:51:19.718 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,A_SourceLightType
2025-09-13 09:51:19.718 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,B_SourceLightType
2025-09-13 09:51:19.768 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:19.771 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_110_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:19.829 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:19.831 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_110_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:19.991 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;6/16,
2025-09-13 09:51:20.000 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:20.095 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:20.446 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 7
2025-09-13 09:51:20.446 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 7
2025-09-13 09:51:20.446 [Thd =65]  Info Default  开始扫描条带； [7/16]
2025-09-13 09:51:20.448 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:20.451 [Thd =46]  Info Default ***row:7, vectorBeginX:-16.356, vectorBeginY:-9.934, captureBeginX:-12.736, captureBeginY:-9.934, captureEndX:10.761, captureEndY:-9.934, vectorEndX:14.663, vectorEndY:-9.934
2025-09-13 09:51:20.451 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:20.452 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361495563524,EndPoint:-10.760724816358
2025-09-13 09:51:20.466 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:20
2025-09-13 09:51:20.483 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:20
2025-09-13 09:51:20.483 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:20
2025-09-13 09:51:20.498 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:20
2025-09-13 09:51:21.655 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:111
2025-09-13 09:51:21.656 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:21.656 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:21.657 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:111
2025-09-13 09:51:21.657 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:21.657 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:A_SourceLightType
2025-09-13 09:51:21.657 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,A_SourceLightType
2025-09-13 09:51:21.657 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,B_SourceLightType
2025-09-13 09:51:21.657 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:B_SourceLightType
2025-09-13 09:51:21.703 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:21.705 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_111_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:21.753 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:21.754 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_111_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:21.925 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;7/16,
2025-09-13 09:51:21.934 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:21.987 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:22.335 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 8
2025-09-13 09:51:22.335 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 8
2025-09-13 09:51:22.335 [Thd =112]  Info Default  开始扫描条带； [8/16]
2025-09-13 09:51:22.337 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:22.340 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:-10.36119, CaptureEndX:-12.39933, CaptureEndY:-10.36119, VectorBeginX:14.66322, VectorBeginY:-10.36119, VectorEndX:-16.35590, VectorEndY:-10.36119, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:22.340 [Thd =46]  Info Default ***row:8, vectorBeginX:14.663, vectorBeginY:-10.361, captureBeginX:11.098, captureBeginY:-10.361, captureEndX:-12.399, captureEndY:-10.361, vectorEndX:-16.356, vectorEndY:-10.361
2025-09-13 09:51:22.340 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:22.341 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097540397967,EndPoint:12.3993339747434
2025-09-13 09:51:23.541 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:112
2025-09-13 09:51:23.541 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:23.541 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:23.541 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:112
2025-09-13 09:51:23.541 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:23.541 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:B_SourceLightType
2025-09-13 09:51:23.542 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:A_SourceLightType
2025-09-13 09:51:23.542 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,B_SourceLightType
2025-09-13 09:51:23.542 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,A_SourceLightType
2025-09-13 09:51:23.590 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:23.593 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_112_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:23.642 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:23.644 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_112_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:23.814 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;8/16,
2025-09-13 09:51:23.823 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:23.873 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:24.222 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 9
2025-09-13 09:51:24.222 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 9
2025-09-13 09:51:24.222 [Thd =38]  Info Default  开始扫描条带； [9/16]
2025-09-13 09:51:24.224 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:24.226 [Thd =46]  Info Default ***row:9, vectorBeginX:-16.356, vectorBeginY:-10.789, captureBeginX:-12.736, captureBeginY:-10.789, captureEndX:10.761, captureEndY:-10.789, vectorEndX:14.663, vectorEndY:-10.789
2025-09-13 09:51:24.226 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:24.227 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361490680712,EndPoint:-10.7607253046392
2025-09-13 09:51:24.757 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:24
2025-09-13 09:51:24.773 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:24
2025-09-13 09:51:25.429 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:113
2025-09-13 09:51:25.429 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:25.429 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:25.430 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:113
2025-09-13 09:51:25.430 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:25.430 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:B_SourceLightType
2025-09-13 09:51:25.430 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:A_SourceLightType
2025-09-13 09:51:25.430 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,B_SourceLightType
2025-09-13 09:51:25.430 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,A_SourceLightType
2025-09-13 09:51:25.481 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:25.483 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_113_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:25.527 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:25.529 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_113_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:25.701 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;9/16,
2025-09-13 09:51:25.710 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:25.795 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:26.144 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 10
2025-09-13 09:51:26.144 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 10
2025-09-13 09:51:26.144 [Thd =131]  Info Default  开始扫描条带； [10/16]
2025-09-13 09:51:26.146 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:26.148 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:-11.21629, CaptureEndX:-12.39934, CaptureEndY:-11.21629, VectorBeginX:14.66321, VectorBeginY:-11.21629, VectorEndX:-16.35591, VectorEndY:-11.21629, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:26.148 [Thd =46]  Info Default ***row:10, vectorBeginX:14.663, vectorBeginY:-11.216, captureBeginX:11.098, captureBeginY:-11.216, captureEndX:-12.399, captureEndY:-11.216, vectorEndX:-16.356, vectorEndY:-11.216
2025-09-13 09:51:26.148 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:26.149 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975342334223,EndPoint:12.3993401392881
2025-09-13 09:51:26.470 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:26
2025-09-13 09:51:26.523 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:26
2025-09-13 09:51:27.025 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:27
2025-09-13 09:51:27.051 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:27
2025-09-13 09:51:27.349 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:114
2025-09-13 09:51:27.349 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:27.350 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:27.353 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:114
2025-09-13 09:51:27.353 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:27.353 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:B_SourceLightType
2025-09-13 09:51:27.353 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:A_SourceLightType
2025-09-13 09:51:27.353 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,B_SourceLightType
2025-09-13 09:51:27.353 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,A_SourceLightType
2025-09-13 09:51:27.405 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:27.407 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_114_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:27.450 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:27.452 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_114_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:27.552 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:27
2025-09-13 09:51:27.571 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:27
2025-09-13 09:51:27.617 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;10/16,
2025-09-13 09:51:27.626 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:27.672 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:28.023 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 11
2025-09-13 09:51:28.023 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 11
2025-09-13 09:51:28.023 [Thd =19]  Info Default  开始扫描条带； [11/16]
2025-09-13 09:51:28.025 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:28.028 [Thd =46]  Info Default ***row:11, vectorBeginX:-16.356, vectorBeginY:-11.644, captureBeginX:-12.736, captureBeginY:-11.644, captureEndX:10.761, captureEndY:-11.644, vectorEndX:14.663, vectorEndY:-11.644
2025-09-13 09:51:28.028 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:28.029 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361560871142,EndPoint:-10.7607182855962
2025-09-13 09:51:29.230 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:115
2025-09-13 09:51:29.230 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:29.231 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:29.231 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:115
2025-09-13 09:51:29.231 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:29.231 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:B_SourceLightType
2025-09-13 09:51:29.231 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:A_SourceLightType
2025-09-13 09:51:29.231 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,B_SourceLightType
2025-09-13 09:51:29.231 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,A_SourceLightType
2025-09-13 09:51:29.281 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:29.284 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_115_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:29.326 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:29.328 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_115_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:29.495 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;11/16,
2025-09-13 09:51:29.505 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:29.575 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:29
2025-09-13 09:51:29.630 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:29.670 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:29
2025-09-13 09:51:29.971 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 12
2025-09-13 09:51:29.971 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 12
2025-09-13 09:51:29.971 [Thd =112]  Info Default  开始扫描条带； [12/16]
2025-09-13 09:51:29.973 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:29.975 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:-12.07138, CaptureEndX:-12.39934, CaptureEndY:-12.07138, VectorBeginX:14.66321, VectorBeginY:-12.07138, VectorEndX:-16.35591, VectorEndY:-12.07138, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:29.975 [Thd =46]  Info Default ***row:12, vectorBeginX:14.663, vectorBeginY:-12.071, captureBeginX:11.098, captureBeginY:-12.071, captureEndX:-12.399, captureEndY:-12.071, vectorEndX:-16.356, vectorEndY:-12.071
2025-09-13 09:51:29.975 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:29.976 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097532463315,EndPoint:12.3993419093954
2025-09-13 09:51:31.177 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:116
2025-09-13 09:51:31.177 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:31.177 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:31.178 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:116
2025-09-13 09:51:31.178 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:31.178 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:B_SourceLightType
2025-09-13 09:51:31.178 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:A_SourceLightType
2025-09-13 09:51:31.178 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,B_SourceLightType
2025-09-13 09:51:31.178 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,A_SourceLightType
2025-09-13 09:51:31.226 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:31.228 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_116_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:31.273 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:31.275 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_116_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:31.446 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;12/16,
2025-09-13 09:51:31.455 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:31.597 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:31.947 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 13
2025-09-13 09:51:31.947 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 13
2025-09-13 09:51:31.947 [Thd =136]  Info Default  开始扫描条带； [13/16]
2025-09-13 09:51:31.949 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:31.951 [Thd =46]  Info Default ***row:13, vectorBeginX:-16.356, vectorBeginY:-12.499, captureBeginX:-12.736, captureBeginY:-12.499, captureEndX:10.761, captureEndY:-12.499, vectorEndX:14.663, vectorEndY:-12.499
2025-09-13 09:51:31.951 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:31.953 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361538898485,EndPoint:-10.7607204828619
2025-09-13 09:51:32.175 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:32
2025-09-13 09:51:32.200 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:32
2025-09-13 09:51:33.155 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:117
2025-09-13 09:51:33.155 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:33.155 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:33.156 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:117
2025-09-13 09:51:33.156 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:33.156 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:A_SourceLightType
2025-09-13 09:51:33.156 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,A_SourceLightType
2025-09-13 09:51:33.156 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,B_SourceLightType
2025-09-13 09:51:33.156 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:B_SourceLightType
2025-09-13 09:51:33.205 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:33.207 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_117_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:33.249 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:33.251 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_117_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:33.418 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;13/16,
2025-09-13 09:51:33.427 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:33.469 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:33.704 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:33
2025-09-13 09:51:33.741 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:33
2025-09-13 09:51:33.820 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 14
2025-09-13 09:51:33.820 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 14
2025-09-13 09:51:33.820 [Thd =38]  Info Default  开始扫描条带； [14/16]
2025-09-13 09:51:33.823 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:51:33.825 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:-12.92648, CaptureEndX:-12.39934, CaptureEndY:-12.92648, VectorBeginX:14.66321, VectorBeginY:-12.92648, VectorEndX:-16.35591, VectorEndY:-12.92648, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:51:33.825 [Thd =46]  Info Default ***row:14, vectorBeginX:14.663, vectorBeginY:-12.926, captureBeginX:11.098, captureBeginY:-12.926, captureEndX:-12.399, captureEndY:-12.926, vectorEndX:-16.356, vectorEndY:-12.926
2025-09-13 09:51:33.825 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:33.826 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975345385378,EndPoint:12.3993398341726
2025-09-13 09:51:35.026 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:118
2025-09-13 09:51:35.027 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:35.027 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:35.027 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:118
2025-09-13 09:51:35.028 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:35.028 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:A_SourceLightType
2025-09-13 09:51:35.028 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:B_SourceLightType
2025-09-13 09:51:35.028 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,A_SourceLightType
2025-09-13 09:51:35.028 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,B_SourceLightType
2025-09-13 09:51:35.082 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:35.084 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_118_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:35.128 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:35.130 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_118_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:35.295 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;14/16,
2025-09-13 09:51:35.304 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:35.355 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:35.705 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 15
2025-09-13 09:51:35.705 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 15
2025-09-13 09:51:35.705 [Thd =112]  Info Default  开始扫描条带； [15/16]
2025-09-13 09:51:35.707 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:51:35.710 [Thd =46]  Info Default ***row:15, vectorBeginX:-16.356, vectorBeginY:-13.354, captureBeginX:-12.736, captureBeginY:-13.354, captureEndX:10.761, captureEndY:-13.354, vectorEndX:14.663, vectorEndY:-13.354
2025-09-13 09:51:35.710 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:51:35.711 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361526691454,EndPoint:-10.760721703565
2025-09-13 09:51:36.913 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:119
2025-09-13 09:51:36.913 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:36.913 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:51:36.913 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:119
2025-09-13 09:51:36.913 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:51:36.913 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:A_SourceLightType
2025-09-13 09:51:36.913 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:B_SourceLightType
2025-09-13 09:51:36.914 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,A_SourceLightType
2025-09-13 09:51:36.914 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,B_SourceLightType
2025-09-13 09:51:36.957 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:51:36.959 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_119_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:37.001 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:51:37.002 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_119_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:51:37.177 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;15/16,
2025-09-13 09:51:37.186 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:51:37.232 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:51:37.580 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 16
2025-09-13 09:51:37.580 [Thd =46]  Info Default begin--m_TaskFinish_event----------
2025-09-13 09:51:37.580 [Thd =19]  Info Default 扫描完成,等待结果处理...
2025-09-13 09:51:38.247 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:38
2025-09-13 09:51:38.264 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:38
2025-09-13 09:51:38.581 [Thd =46]  Info Default end--m_TaskFinish_event----------
2025-09-13 09:51:38.839 [Thd =46]  Info Default ***********Task finished.**************
2025-09-13 09:51:38.839 [Thd =46]  Info Default Stop the detection thread;
2025-09-13 09:51:38.887 [Thd =172]  Warn Default 还原光源最大功率
2025-09-13 09:51:38.887 [Thd =57]  Info Default LaserLamp MaxPower:300
2025-09-13 09:51:39.245 [Thd =221]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:51:39.698 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:39
2025-09-13 09:51:39.717 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:39
2025-09-13 09:51:39.888 [Thd =57]  Info Default OpenLamp Transmission
2025-09-13 09:51:40.690 [Thd =172]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:51:40.891 [Thd =57]  Info Default CloseLamp Reflection
2025-09-13 09:51:41.934 [Thd =180]  Info Default LaserLamp MaxPower:300,currentPower:180
2025-09-13 09:51:42.622 [Thd =20]  Info Default RecordCompleteStripNo begin:2025-09-13 09:51:42
2025-09-13 09:51:42.640 [Thd =20]  Info Default RecordCompleteStripNo end:2025-09-13 09:51:42
2025-09-13 09:51:42.640 [Thd =112]  Info Default 等待硬件处理中...
2025-09-13 09:51:43.594 [Thd =66]  Warn Default 已切换到面阵光路
2025-09-13 09:51:43.873 [Thd =221]  Info Default QuerySubstrateMode Area OK 
2025-09-13 09:51:43.873 [Thd =65]  Info Default 已切换到面阵聚焦模式
2025-09-13 09:51:43.935 [Thd =180]  Error Default SyncSend recv cmd timeout
2025-09-13 09:51:47.875 [Thd =221]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:51:47.875 [Thd =65]  Info Default 聚焦Track已关闭
2025-09-13 09:51:47.875 [Thd =46]  Info Default Finally Over！
2025-09-13 09:51:47.881 [Thd =46]  Info Default Inspection:End Memory usage:5345.285MB VirtualMemorySize:142.1 GB
2025-09-13 09:51:47.881 [Thd =46]  Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over!
2025-09-13 09:51:47.881 [Thd =20]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Finished
2025-09-13 09:51:47.881 [Thd =19]  Info Default 硬件处理完成。
2025-09-13 09:51:47.881 [Thd =20]  Info Default LightState 000:last:Inspecting,now:InspectComplete
2025-09-13 09:51:47.883 [Thd =20]  Info Default LightState 222:InspectComplete
2025-09-13 09:51:47.884 [Thd =20]  Info Default PLCKeyence:SetSystemStatus:WR DM0 1

2025-09-13 09:51:47.884 [Thd =20]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:51:47.884 [Thd =180]  Info Default 结果处理全部完成！
2025-09-13 09:51:47.896 [Thd =66]  Info Default Chuck vacuum close
2025-09-13 09:51:48.898 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:51:48.898 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished! CurTaskName:1979
2025-09-13 09:51:49.710 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:51:49.713 [Thd =47]  Error Default MaskDefectPanel::GenerateTxtReport(): No Defect in this report:.1979
2025-09-13 09:51:49.847 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished End! CurTaskName:1979
2025-09-13 09:51:49.857 [Thd =1]  Info Default DefectPicID:a458f079-33fb-4aff-8601-37bba91d52fe
2025-09-13 09:51:49.929 [Thd =1]  Info Default DefectPicID:a458f079-33fb-4aff-8601-37bba91d52fe
2025-09-13 09:51:49.966 [Thd =20]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-09-13 09:51:49.966 [Thd =20]  Info Default *********Reset2**********
2025-09-13 09:51:49.966 [Thd =172]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-09-13 09:51:49.966 [Thd =180]  Info Default 检测完成！
2025-09-13 09:51:50.006 [Thd =1]  Info Default DefectPicID:a458f079-33fb-4aff-8601-37bba91d52fe
2025-09-13 09:51:51.762 [Thd =1]  Info Default DefectPicID:26940767-a56c-4c24-9ca2-126058848669
2025-09-13 09:51:51.839 [Thd =1]  Info Default DefectPicID:26940767-a56c-4c24-9ca2-126058848669
2025-09-13 09:51:51.911 [Thd =1]  Info Default DefectPicID:26940767-a56c-4c24-9ca2-126058848669
2025-09-13 09:51:51.987 [Thd =1]  Info Default DefectPicID:26940767-a56c-4c24-9ca2-126058848669
2025-09-13 09:51:52.458 [Thd =1]  Info Default DefectPicID:e8bf8cda-d8cf-4962-96b1-c62c0c570883
2025-09-13 09:51:53.507 [Thd =213]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101110,"ServiceStartTime":"2025\/9\/13 9:50:33","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:51:53.507 [Thd =213]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101110,"ServiceStartTime":"2025\/9\/13 9:50:25","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:51:56.050 [Thd =196]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101115,"ServiceStartTime":"2025\/9\/13 9:51:53","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:51:56.063 [Thd =221]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101115,"ServiceStartTime":"2025\/9\/13 9:51:43","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:51:56.480 [Thd =172]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-09-13 09:52:07.224 [Thd =1]  Info Default VerifyModule.StopInspect() Stop !
2025-09-13 09:52:07.226 [Thd =1]  Info Default InspectProxy.Stop, InspectRuntimeInfo Thread health：
No memory resources：0001-01-01 00:00:00 
Excessive striping：0001-01-01 00:00:00 
 
Camera capture：
Camera capture received：2025-09-13 09:51:36 
no received resource：0001-01-01 00:00:00 
 
result handles thread health：
Result processing time：2025-09-13 09:51:42 
The number of images processed：13888/13888 
 
algorithm returns ：
MCU returns time：2025-09-13 09:51:42 
MCUSDK ReceiveCount：704 
Effect return time：2025-09-13 09:49:55 
 return time：2025-09-13 09:51:42 
return count：704 
max begin_pos：104143 
real_batch sum：13888 
 
ThreadPool：
Runing：179 , Available：193 ,I/O：200 

2025-09-13 09:52:21.728 [Thd =1]  Info Default LightState 000:last:InspectComplete,now:StormInit
2025-09-13 09:52:21.730 [Thd =1]  Info Default LightState 222:StormInit
2025-09-13 09:52:21.730 [Thd =1]  Info Default Licensed has techLevel count:2
2025-09-13 09:52:21.731 [Thd =1]  Info Default New INI File！st_core_P200_BIM.ini
2025-09-13 09:52:21.830 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-09-13 09:52:21.830 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-09-13 09:52:21.830 [Thd =47]  Info Default Start [1/1]
2025-09-13 09:52:21.836 [Thd =1]  Info Default Inspection:Before Memory usage:4929.652MB VirtualMemorySize:141.6 GB
2025-09-13 09:52:21.836 [Thd =19]  Info Default 开始检查！
2025-09-13 09:52:21.972 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:7928844,68723239 ，GDSStep:2016，stripNo:0，PixelX_line:0.212071778 
2025-09-13 09:52:21.972 [Thd =65]  Info Default 初始化插件
2025-09-13 09:52:21.972 [Thd =213]  Info Default 初始化DB目录
2025-09-13 09:52:21.972 [Thd =112]  Info Default 设置 TDI 相机参数...
2025-09-13 09:52:21.972 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-09-13 09:52:21.972 [Thd =172]  Info Default TDICamera1:Current:TDIStage：TDI120，Target：TDI120,CurrentSize:2048,2048
2025-09-13 09:52:21.972 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-09-13 09:52:21.972 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-09-13 09:52:21.972 [Thd =172]  Info Default TDICamera1:Camera size no change,do not set
2025-09-13 09:52:21.973 [Thd =222]  Info Default TDICamera0:Current:TDIStage：TDI256，Target：TDI256,CurrentSize:2048,2048
2025-09-13 09:52:21.973 [Thd =222]  Info Default TDICamera0:Camera size no change,do not set
2025-09-13 09:52:22.094 [Thd =66]  Info Default 初始化DPU服务器！
2025-09-13 09:52:22.094 [Thd =221]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-09-13 09:52:22.366 [Thd =1]  Info Default LightState 000:last:StormInit,now:StormInit
2025-09-13 09:52:23.425 [Thd =172]  Info Default TDICamera1:TriggerMode is On,do not set
2025-09-13 09:52:23.928 [Thd =222]  Info Default TDICamera0:TriggerMode is On,do not set
2025-09-13 09:52:23.973 [Thd =1]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:52:28.112 [Thd =112]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101133,"ServiceStartTime":"2025\/9\/13 9:51:53","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:52:28.112 [Thd =112]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101133,"ServiceStartTime":"2025\/9\/13 9:51:43","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:52:30.652 [Thd =172]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101138,"ServiceStartTime":"2025\/9\/13 9:52:27","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:52:30.976 [Thd =131]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101138,"ServiceStartTime":"2025\/9\/13 9:52:18","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:52:31.117 [Thd =221]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-09-13 09:52:31.136 [Thd =1]  Info Default Register inspect event！
2025-09-13 09:52:31.162 [Thd =1]  Info Default initial*****Light_intensity:40, min:10, max:220
2025-09-13 09:52:31.162 [Thd =136]  Info Default 初始化检测数据
2025-09-13 09:52:31.162 [Thd =1]  Info Default ***gds clip thread num is 6
2025-09-13 09:52:31.163 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-09-13 09:52:31.163 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 0, reference point GDS_Y: 0, reference point Stage_X: -58.0185471554495, reference point Stage_Y: 45.6395234027315, starting point GDS_X: 7928844, starting point GDS_Y: 68723239
2025-09-13 09:52:31.163 [Thd =36]  Info Default m_start_strip_no:0
2025-09-13 09:52:31.163 [Thd =36]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-09-13 09:52:31.163 [Thd =36]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":null,"m_layerMode":0,"m_layerNo":0,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212071778,"m_pixelSizeY":0.212071778,"m_pixelSizeX_Len":0.212071778,"m_pixelSizeY_Len":0.212071778,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":836,"m_col":217,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":7928844,"m_beginY":68723239,"m_endX":97280927,"m_endY":45980727,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":4,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":1263,"m_AL":1,"m_lcol":211,"m_tolerance_mode":0,"m_x_tolerance":0.0,"m_y_tolerance":0.0,"m_CD_Defect_resolution":0.5,"m_pinhole_Defect_resolution":0.5,"m_degreeThrd":44,"m_cornerThrd":0,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":null,"m_bUseDP":false,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":209,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-09-13\\rcp_SL_1/","m_line_camera_ud_offset":-1,"m_line_camera_lr_offset":2,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-09-13\\rcp_SL_1/","m_optical_head_total":0,"m_inner_round":0.0,"m_optical_head_id":0,"m_outer_round":0.0,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":0.0,"m_CD2_Defect_resolution":0.5,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,214,4,0,1130102784,1065353216,1065353216,6,40,0],"m_R_collect":[200,202,44,0,1128792064,1065353216,1065353216,10752,2,1094713344],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":1,"m_line_camera_ud_offset_f":-1.45,"m_mask_inspection_mode_ex":4,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":1,"m_Edge_2_thrd_mode":1,"m_Gray_thrd_mode":1,"m_line_camera_lr_offset_f":2.05,"SL_Edge_switch":3,"SL_Edge2_switch":3,"crDrop_switch":3,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":0.0,"m_y_tolerance_R":0.0,"m_inner_round_R":0.0,"m_outer_round_R":0.0,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-0.65,"lr_decimal_right":1.3,"m_simple_gray_defect_kernel":0,"m_cs_pitchs":null,"m_OPCplate":false,"m_dilation_value":2.5}
2025-09-13 09:52:31.163 [Thd =36]  Info Default m_line_camera_cols:53
2025-09-13 09:52:31.163 [Thd =36]  Info Default AllocHGlobal img mem pic_count:53, img_w:2032, img_h:2048
2025-09-13 09:52:31.164 [Thd =36]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:SLMODE
2025-09-13 09:52:31.167 [Thd =36]  Info Default Set distortion correction parameters End
2025-09-13 09:52:31.167 [Thd =36]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):836,pic_count(Grid2.Cols):211,pic_count_pack(Grid.Cols):217,max_batch:20,mode:4,m_channel:4 
2025-09-13 09:52:31.265 [Thd =36]  Info Default InitDie2DBRes Success!!!!
2025-09-13 09:52:31.266 [Thd =1]  Info Default Successful alignment！
2025-09-13 09:52:31.266 [Thd =57]  Info Default 对准完成！
2025-09-13 09:52:31.266 [Thd =180]  Info Default 稍等！设置相机参数中
2025-09-13 09:52:31.266 [Thd =1]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:52:31.266 [Thd =47]  Info Default 移动到起始点位
2025-09-13 09:52:32.267 [Thd =1]  Info Default Move to the inspect start point，Starting point coordinates：X:10.7046918445505,Y:37.7106794027315,OffSet.X:0,OffSet.Y:0
2025-09-13 09:52:32.267 [Thd =66]  Warn Default 标记偏移点X:0，Y:0
2025-09-13 09:52:34.388 [Thd =36]  Info Default Zposition:0
2025-09-13 09:52:37.197 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Running
2025-09-13 09:52:37.197 [Thd =1]  Info Default LightState 000:last:StormInit,now:Inspecting
2025-09-13 09:52:37.206 [Thd =1]  Info Default LightState 222:Inspecting
2025-09-13 09:52:37.206 [Thd =1]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:52:37.206 [Thd =1]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:52:37.207 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() Running ! 
2025-09-13 09:52:37.207 [Thd =1]  Info Default AutoWorderHelper:StartWorker.
2025-09-13 09:52:37.207 [Thd =1]  Info Default AutoWorderHelper:SaveTask2DB.
2025-09-13 09:52:37.521 [Thd =1]  Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 1980
2025-09-13 09:52:37.521 [Thd =1]  Info Default AutoWorderHelper:InitInspectingData.
2025-09-13 09:52:37.521 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0
2025-09-13 09:52:37.521 [Thd =46]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Running
2025-09-13 09:52:37.522 [Thd =46]  Info Default LightState 000:last:Inspecting,now:Inspecting
2025-09-13 09:52:37.522 [Thd =46]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:52:37.522 [Thd =213]  Info Default 结果处理线程启动！
2025-09-13 09:52:37.522 [Thd =38]  Info Default 检测线程启动！
2025-09-13 09:52:37.522 [Thd =46]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:52:37.523 [Thd =46]  Info Default defectData.RecivePicCount:0
2025-09-13 09:52:37.523 [Thd =46]  Info Default start inspect task pic_count of one strip:53, big_strip_count:120. 
2025-09-13 09:52:37.523 [Thd =46]  Info Default m_StagePixelSizeX=0.212071778， m_StagePixelSizeY=0.212071778.
2025-09-13 09:52:37.523 [Thd =46]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-09-13 09:52:37.523 [Thd =46]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-09-13 09:52:37.523 [Thd =46]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-09-13 09:52:37.523 [Thd =46]  Info Default BaseScanObjectLine:------------------
2025-09-13 09:52:37.523 [Thd =46]  Info Default BaseScanObjectLine:*****************
2025-09-13 09:52:37.523 [Thd =46]  Info Default BaseScanObjectLine:0000000000000000
2025-09-13 09:52:37.523 [Thd =46]  Info Default scaleX: 0.999968571, scaleY:1
2025-09-13 09:52:37.523 [Thd =46]  Info Default Orth_Y_BeforR: 0,StageScaleX:0.999968571,Y:1
2025-09-13 09:52:37.523 [Thd =46]  Info Default LengthOfAccelerationAndDeceleration: 4
2025-09-13 09:52:37.526 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:1980
2025-09-13 09:52:37.527 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:1980
2025-09-13 09:52:39.373 [Thd =1]  Info Default StormReport Loading: Memory usage:4913.18MB VirtualMemorySize:141.6 GB
2025-09-13 09:52:41.540 [Thd =1]  Info Default StormReport LoadTask:Before Memory usage:4785.09MB VirtualMemorySize:141.6 GB
2025-09-13 09:52:41.572 [Thd =46]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:52:41.572 [Thd =172]  Info Default 聚焦Track已关闭
2025-09-13 09:52:41.572 [Thd =131]  Info Default 正在切换线阵相机光路
2025-09-13 09:52:41.785 [Thd =1]  Info Default StormReport LoadTask:End Memory usage:4811.766MB VirtualMemorySize:141.7 GB
2025-09-13 09:52:42.026 [Thd =1]  Info Default RefreshView！
2025-09-13 09:52:46.279 [Thd =46]  Info Default ChangeLightPath: True!
2025-09-13 09:52:46.279 [Thd =46]  Info Default SnakeScanLine: Paddle Rotate angle is 0 !
2025-09-13 09:52:48.098 [Thd =46]  Info Default InspectOverlayX: 16, InspectOverlayY:16
2025-09-13 09:52:48.103 [Thd =36]  Warn Default 检测光源最大功率(mw):300mw
2025-09-13 09:52:48.103 [Thd =46]  Info Default SetMaxPower:300
2025-09-13 09:52:49.105 [Thd =213]  Info Default 正在打开透射、反射光源，亮度 40%
2025-09-13 09:52:49.105 [Thd =46]  Info Default OpenLamp Transmission
2025-09-13 09:52:49.907 [Thd =131]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:52:50.106 [Thd =46]  Info Default OpenLamp Reflection
2025-09-13 09:52:51.143 [Thd =36]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-09-13 09:52:51.910 [Thd =46]  Info Default PolarizationBaffleControl False: 2!
2025-09-13 09:52:51.910 [Thd =111]  Info Default 正在启用实时聚焦
2025-09-13 09:52:52.804 [Thd =46]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:52:53.143 [Thd =36]  Error Default SyncSend recv cmd timeout
2025-09-13 09:52:55.307 [Thd =46]  Info Default QuerySubstrateMode Line OK 
2025-09-13 09:52:55.307 [Thd =180]  Info Default 已切换到线阵聚焦模式
2025-09-13 09:52:56.308 [Thd =47]  Info Default 正在设置扫描控制参数
2025-09-13 09:52:56.308 [Thd =46]  Info Default GetParameter: stepCompX is 0.000212071778
2025-09-13 09:52:57.202 [Thd =46]  Info Default Allocate resources!
2025-09-13 09:52:57.202 [Thd =46]  Info Default GPU num is 1!
2025-09-13 09:53:01.204 [Thd =46]  Info Default SetFocusTrack OpenTrack OK 
2025-09-13 09:53:01.204 [Thd =77]  Info Default 聚焦Track已开启
2025-09-13 09:53:01.204 [Thd =46]  Info Default Start scanning; Start strip number: 0, total strip number: 120
2025-09-13 09:53:01.204 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 0
2025-09-13 09:53:01.204 [Thd =77]  Info Default  开始扫描条带； [0/120]
2025-09-13 09:53:01.207 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:01.209 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:37.52300, CaptureEndX:-12.39934, CaptureEndY:37.52300, VectorBeginX:14.66321, VectorBeginY:37.52300, VectorEndX:-16.35591, VectorEndY:37.52300, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:01.209 [Thd =46]  Info Default ***row:0, vectorBeginX:14.663, vectorBeginY:37.523, captureBeginX:11.098, captureBeginY:37.523, captureEndX:-12.399, captureEndY:37.523, vectorEndX:-16.356, vectorEndY:37.523
2025-09-13 09:53:01.209 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:01.211 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975294725901,EndPoint:12.3993449001203
2025-09-13 09:53:02.497 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:0
2025-09-13 09:53:02.497 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:02.497 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:02.498 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:0
2025-09-13 09:53:02.498 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:02.498 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:B_SourceLightType
2025-09-13 09:53:02.498 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:A_SourceLightType
2025-09-13 09:53:02.498 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,B_SourceLightType
2025-09-13 09:53:02.498 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,A_SourceLightType
2025-09-13 09:53:02.548 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:02.569 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_0_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:02.623 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:02.625 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_0_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:02.685 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;0/120,
2025-09-13 09:53:02.694 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:02.754 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:03.094 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 1
2025-09-13 09:53:03.094 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 1
2025-09-13 09:53:03.094 [Thd =66]  Info Default  开始扫描条带； [1/120]
2025-09-13 09:53:03.096 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:03.098 [Thd =46]  Info Default ***row:1, vectorBeginX:-16.356, vectorBeginY:37.095, captureBeginX:-12.736, captureBeginY:37.095, captureEndX:10.761, captureEndY:37.095, vectorEndX:14.663, vectorEndY:37.095
2025-09-13 09:53:03.098 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:03.099 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361547443407,EndPoint:-10.7607196283697
2025-09-13 09:53:04.299 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:1
2025-09-13 09:53:04.300 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:04.300 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:04.301 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:1
2025-09-13 09:53:04.301 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:04.301 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:B_SourceLightType
2025-09-13 09:53:04.302 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,B_SourceLightType
2025-09-13 09:53:04.302 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,A_SourceLightType
2025-09-13 09:53:04.302 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:A_SourceLightType
2025-09-13 09:53:04.348 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:04.368 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_1_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:04.417 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:04.419 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_1_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:04.566 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;1/120,
2025-09-13 09:53:04.575 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:04.626 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:04.975 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 2
2025-09-13 09:53:04.975 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 2
2025-09-13 09:53:04.975 [Thd =65]  Info Default  开始扫描条带； [2/120]
2025-09-13 09:53:04.977 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:04.980 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:36.66789, CaptureEndX:-12.39934, CaptureEndY:36.66789, VectorBeginX:14.66321, VectorBeginY:36.66789, VectorEndX:-16.35591, VectorEndY:36.66789, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:04.980 [Thd =46]  Info Default ***row:2, vectorBeginX:14.663, vectorBeginY:36.668, captureBeginX:11.098, captureBeginY:36.668, captureEndX:-12.399, captureEndY:36.668, vectorEndX:-16.356, vectorEndY:36.668
2025-09-13 09:53:04.980 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:04.981 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975301439959,EndPoint:12.3993442287145
2025-09-13 09:53:06.103 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:06
2025-09-13 09:53:06.123 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:06
2025-09-13 09:53:06.181 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:2
2025-09-13 09:53:06.181 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:06.181 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:06.182 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:2
2025-09-13 09:53:06.182 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:06.185 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:B_SourceLightType
2025-09-13 09:53:06.185 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:A_SourceLightType
2025-09-13 09:53:06.185 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,B_SourceLightType
2025-09-13 09:53:06.185 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,A_SourceLightType
2025-09-13 09:53:06.234 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:06.236 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_2_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:06.304 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:06.305 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_2_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:06.448 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;2/120,
2025-09-13 09:53:06.457 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:06.499 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:06.848 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 3
2025-09-13 09:53:06.848 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 3
2025-09-13 09:53:06.848 [Thd =221]  Info Default  开始扫描条带； [3/120]
2025-09-13 09:53:06.851 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:06.854 [Thd =46]  Info Default ***row:3, vectorBeginX:-16.356, vectorBeginY:36.240, captureBeginX:-12.736, captureBeginY:36.240, captureEndX:10.761, captureEndY:36.240, vectorEndX:14.663, vectorEndY:36.240
2025-09-13 09:53:06.854 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:06.855 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361538898485,EndPoint:-10.7607204828619
2025-09-13 09:53:08.057 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:3
2025-09-13 09:53:08.057 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:08.057 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:08.058 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:3
2025-09-13 09:53:08.058 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:08.058 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:B_SourceLightType
2025-09-13 09:53:08.058 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,B_SourceLightType
2025-09-13 09:53:08.058 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,A_SourceLightType
2025-09-13 09:53:08.058 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:A_SourceLightType
2025-09-13 09:53:08.107 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:08.109 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_3_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:08.127 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:08
2025-09-13 09:53:08.147 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:08
2025-09-13 09:53:08.164 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:08.166 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_3_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:08.327 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;3/120,
2025-09-13 09:53:08.337 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:08.378 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:08.729 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 4
2025-09-13 09:53:08.729 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 4
2025-09-13 09:53:08.729 [Thd =36]  Info Default  开始扫描条带； [4/120]
2025-09-13 09:53:08.731 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:08.733 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:35.81280, CaptureEndX:-12.39934, CaptureEndY:35.81280, VectorBeginX:14.66321, VectorBeginY:35.81280, VectorEndX:-16.35591, VectorEndY:35.81280, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:08.733 [Thd =46]  Info Default ***row:4, vectorBeginX:14.663, vectorBeginY:35.813, captureBeginX:11.098, captureBeginY:35.813, captureEndX:-12.399, captureEndY:35.813, vectorEndX:-16.356, vectorEndY:35.813
2025-09-13 09:53:08.733 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:08.735 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975302660769,EndPoint:12.3993441066335
2025-09-13 09:53:09.148 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:09
2025-09-13 09:53:09.187 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:09
2025-09-13 09:53:09.937 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:4
2025-09-13 09:53:09.937 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:09.937 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:09.938 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:4
2025-09-13 09:53:09.938 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:09.938 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:A_SourceLightType
2025-09-13 09:53:09.938 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:B_SourceLightType
2025-09-13 09:53:09.938 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,A_SourceLightType
2025-09-13 09:53:09.938 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,B_SourceLightType
2025-09-13 09:53:09.985 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:09.987 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_4_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:10.036 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:10.038 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_4_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:10.209 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;4/120,
2025-09-13 09:53:10.218 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:10.268 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:10.614 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 5
2025-09-13 09:53:10.614 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 5
2025-09-13 09:53:10.614 [Thd =222]  Info Default  开始扫描条带； [5/120]
2025-09-13 09:53:10.616 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:10.619 [Thd =46]  Info Default ***row:5, vectorBeginX:-16.356, vectorBeginY:35.385, captureBeginX:-12.736, captureBeginY:35.385, captureEndX:10.761, captureEndY:35.385, vectorEndX:14.663, vectorEndY:35.385
2025-09-13 09:53:10.619 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:10.620 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361565143603,EndPoint:-10.7607178583501
2025-09-13 09:53:10.690 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:10
2025-09-13 09:53:10.708 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:10
2025-09-13 09:53:11.822 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:5
2025-09-13 09:53:11.822 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:11.822 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:11.823 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:5
2025-09-13 09:53:11.823 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:11.823 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:B_SourceLightType
2025-09-13 09:53:11.823 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:A_SourceLightType
2025-09-13 09:53:11.823 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,B_SourceLightType
2025-09-13 09:53:11.823 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,A_SourceLightType
2025-09-13 09:53:11.871 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:11.873 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_5_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:11.919 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:11.921 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_5_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:12.094 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;5/120,
2025-09-13 09:53:12.102 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:12.143 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:12.493 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 6
2025-09-13 09:53:12.493 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 6
2025-09-13 09:53:12.493 [Thd =38]  Info Default  开始扫描条带； [6/120]
2025-09-13 09:53:12.495 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:12.497 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:34.95769, CaptureEndX:-12.39934, CaptureEndY:34.95769, VectorBeginX:14.66321, VectorBeginY:34.95769, VectorEndX:-16.35591, VectorEndY:34.95769, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:12.498 [Thd =46]  Info Default ***row:6, vectorBeginX:14.663, vectorBeginY:34.958, captureBeginX:11.098, captureBeginY:34.958, captureEndX:-12.399, captureEndY:34.958, vectorEndX:-16.356, vectorEndY:34.958
2025-09-13 09:53:12.498 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:12.499 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975302050089,EndPoint:12.3993441677015
2025-09-13 09:53:13.699 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:6
2025-09-13 09:53:13.699 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:13.699 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:13.700 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:6
2025-09-13 09:53:13.700 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:13.700 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:B_SourceLightType
2025-09-13 09:53:13.700 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,B_SourceLightType
2025-09-13 09:53:13.700 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,A_SourceLightType
2025-09-13 09:53:13.700 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:A_SourceLightType
2025-09-13 09:53:13.749 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:13.751 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_6_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:13.799 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:13.801 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_6_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:13.970 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;6/120,
2025-09-13 09:53:13.979 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:14.020 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:14.370 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 7
2025-09-13 09:53:14.370 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 7
2025-09-13 09:53:14.370 [Thd =111]  Info Default  开始扫描条带； [7/120]
2025-09-13 09:53:14.372 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:14.374 [Thd =46]  Info Default ***row:7, vectorBeginX:-16.356, vectorBeginY:34.530, captureBeginX:-12.736, captureBeginY:34.530, captureEndX:10.761, captureEndY:34.530, vectorEndX:14.663, vectorEndY:34.530
2025-09-13 09:53:14.374 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:14.375 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361648761767,EndPoint:-10.7607094965337
2025-09-13 09:53:14.830 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:14
2025-09-13 09:53:14.862 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:14
2025-09-13 09:53:15.003 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:15
2025-09-13 09:53:15.043 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:15
2025-09-13 09:53:15.578 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:7
2025-09-13 09:53:15.579 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:15.579 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:15.580 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:7
2025-09-13 09:53:15.580 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:15.580 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:B_SourceLightType
2025-09-13 09:53:15.580 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:A_SourceLightType
2025-09-13 09:53:15.580 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,B_SourceLightType
2025-09-13 09:53:15.580 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,A_SourceLightType
2025-09-13 09:53:15.627 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:15.629 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_7_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:15.679 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:15.681 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_7_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:15.841 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;7/120,
2025-09-13 09:53:15.850 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:15.899 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:16.251 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 8
2025-09-13 09:53:16.251 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 8
2025-09-13 09:53:16.251 [Thd =213]  Info Default  开始扫描条带； [8/120]
2025-09-13 09:53:16.253 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:16.255 [Thd =46]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:34.10260, CaptureEndX:-12.39935, CaptureEndY:34.10260, VectorBeginX:14.66320, VectorBeginY:34.10260, VectorEndX:-16.35592, VectorEndY:34.10260, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:16.255 [Thd =46]  Info Default ***row:8, vectorBeginX:14.663, vectorBeginY:34.103, captureBeginX:11.098, captureBeginY:34.103, captureEndX:-12.399, captureEndY:34.103, vectorEndX:-16.356, vectorEndY:34.103
2025-09-13 09:53:16.255 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:16.256 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975248338106,EndPoint:12.3993495388998
2025-09-13 09:53:17.457 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:8
2025-09-13 09:53:17.457 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:17.457 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:17.458 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:8
2025-09-13 09:53:17.458 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:17.458 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:A_SourceLightType
2025-09-13 09:53:17.458 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:B_SourceLightType
2025-09-13 09:53:17.458 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,A_SourceLightType
2025-09-13 09:53:17.458 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,B_SourceLightType
2025-09-13 09:53:17.527 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:17.531 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_8_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:17.581 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:17.584 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_8_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:17.726 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;8/120,
2025-09-13 09:53:17.735 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:17.937 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:18.289 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 9
2025-09-13 09:53:18.289 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 9
2025-09-13 09:53:18.289 [Thd =57]  Info Default  开始扫描条带； [9/120]
2025-09-13 09:53:18.291 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:18.293 [Thd =46]  Info Default ***row:9, vectorBeginX:-16.356, vectorBeginY:33.675, captureBeginX:-12.736, captureBeginY:33.675, captureEndX:10.761, captureEndY:33.675, vectorEndX:14.663, vectorEndY:33.675
2025-09-13 09:53:18.293 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:18.295 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361604206103,EndPoint:-10.7607139521001
2025-09-13 09:53:18.626 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:18
2025-09-13 09:53:18.689 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:18
2025-09-13 09:53:19.215 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:19
2025-09-13 09:53:19.265 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:19
2025-09-13 09:53:19.499 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:9
2025-09-13 09:53:19.499 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:9
2025-09-13 09:53:19.499 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:19.499 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:19.499 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:19.499 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:B_SourceLightType
2025-09-13 09:53:19.499 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:A_SourceLightType
2025-09-13 09:53:19.499 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,B_SourceLightType
2025-09-13 09:53:19.499 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,A_SourceLightType
2025-09-13 09:53:19.562 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:19.564 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_9_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:19.612 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:19.616 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_9_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:19.761 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;9/120,
2025-09-13 09:53:19.770 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:19.853 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:20.204 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 10
2025-09-13 09:53:20.204 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 10
2025-09-13 09:53:20.204 [Thd =77]  Info Default  开始扫描条带； [10/120]
2025-09-13 09:53:20.206 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:20.209 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:33.24751, CaptureEndX:-12.39934, CaptureEndY:33.24751, VectorBeginX:14.66321, VectorBeginY:33.24751, VectorEndX:-16.35591, VectorEndY:33.24751, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:20.209 [Thd =46]  Info Default ***row:10, vectorBeginX:14.663, vectorBeginY:33.248, captureBeginX:11.098, captureBeginY:33.248, captureEndX:-12.399, captureEndY:33.248, vectorEndX:-16.356, vectorEndY:33.248
2025-09-13 09:53:20.209 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:20.210 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975302049601,EndPoint:12.3993441677503
2025-09-13 09:53:21.409 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:10
2025-09-13 09:53:21.409 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:21.409 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:21.411 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:10
2025-09-13 09:53:21.411 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:21.411 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:B_SourceLightType
2025-09-13 09:53:21.411 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:A_SourceLightType
2025-09-13 09:53:21.411 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,B_SourceLightType
2025-09-13 09:53:21.411 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,A_SourceLightType
2025-09-13 09:53:21.460 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:21.462 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_10_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:21.522 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:21.524 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_10_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:21.679 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;10/120,
2025-09-13 09:53:21.687 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:21.737 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:21.994 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:21
2025-09-13 09:53:22.011 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:22
2025-09-13 09:53:22.087 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 11
2025-09-13 09:53:22.087 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 11
2025-09-13 09:53:22.087 [Thd =77]  Info Default  开始扫描条带； [11/120]
2025-09-13 09:53:22.089 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:22.092 [Thd =46]  Info Default ***row:11, vectorBeginX:-16.356, vectorBeginY:32.820, captureBeginX:-12.736, captureBeginY:32.820, captureEndX:10.761, captureEndY:32.820, vectorEndX:14.663, vectorEndY:32.820
2025-09-13 09:53:22.092 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:22.093 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361598102587,EndPoint:-10.7607145624517
2025-09-13 09:53:22.512 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:22
2025-09-13 09:53:22.557 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:22
2025-09-13 09:53:23.293 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:11
2025-09-13 09:53:23.294 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:23.294 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:23.299 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:11
2025-09-13 09:53:23.299 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:23.299 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:A_SourceLightType
2025-09-13 09:53:23.299 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:B_SourceLightType
2025-09-13 09:53:23.299 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,A_SourceLightType
2025-09-13 09:53:23.299 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,B_SourceLightType
2025-09-13 09:53:23.350 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:23.352 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_11_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:23.401 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:23.403 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_11_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:23.558 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;11/120,
2025-09-13 09:53:23.567 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:23.607 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:23.956 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 12
2025-09-13 09:53:23.956 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 12
2025-09-13 09:53:23.956 [Thd =48]  Info Default  开始扫描条带； [12/120]
2025-09-13 09:53:23.959 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:23.961 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:32.39242, CaptureEndX:-12.39935, CaptureEndY:32.39242, VectorBeginX:14.66320, VectorBeginY:32.39242, VectorEndX:-16.35591, VectorEndY:32.39242, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:23.961 [Thd =46]  Info Default ***row:12, vectorBeginX:14.663, vectorBeginY:32.392, captureBeginX:11.098, captureBeginY:32.392, captureEndX:-12.399, captureEndY:32.392, vectorEndX:-16.356, vectorEndY:32.392
2025-09-13 09:53:23.961 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:23.962 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975277635615,EndPoint:12.3993466091489
2025-09-13 09:53:24.250 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:24
2025-09-13 09:53:24.269 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:24
2025-09-13 09:53:25.164 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:12
2025-09-13 09:53:25.164 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:25.164 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:25.165 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:12
2025-09-13 09:53:25.165 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:25.165 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:B_SourceLightType
2025-09-13 09:53:25.165 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:A_SourceLightType
2025-09-13 09:53:25.165 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,B_SourceLightType
2025-09-13 09:53:25.166 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,A_SourceLightType
2025-09-13 09:53:25.214 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:25.216 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_12_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:25.266 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:25.268 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_12_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:25.428 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;12/120,
2025-09-13 09:53:25.437 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:25.480 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:25.820 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 13
2025-09-13 09:53:25.820 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 13
2025-09-13 09:53:25.820 [Thd =57]  Info Default  开始扫描条带； [13/120]
2025-09-13 09:53:25.822 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:25.824 [Thd =46]  Info Default ***row:13, vectorBeginX:-16.356, vectorBeginY:31.965, captureBeginX:-12.736, captureBeginY:31.965, captureEndX:10.761, captureEndY:31.965, vectorEndX:14.663, vectorEndY:31.965
2025-09-13 09:53:25.824 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:25.826 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361579181688,EndPoint:-10.7607164545416
2025-09-13 09:53:27.028 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:13
2025-09-13 09:53:27.028 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:27.028 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:27.029 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:13
2025-09-13 09:53:27.030 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:27.030 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:A_SourceLightType
2025-09-13 09:53:27.030 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:B_SourceLightType
2025-09-13 09:53:27.030 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,A_SourceLightType
2025-09-13 09:53:27.030 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,B_SourceLightType
2025-09-13 09:53:27.078 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:27.079 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_13_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:27.132 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:27.134 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_13_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:27.291 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;13/120,
2025-09-13 09:53:27.300 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:27.494 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:27.835 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 14
2025-09-13 09:53:27.835 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 14
2025-09-13 09:53:27.835 [Thd =150]  Info Default  开始扫描条带； [14/120]
2025-09-13 09:53:27.837 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:27.840 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:31.53731, CaptureEndX:-12.39935, CaptureEndY:31.53731, VectorBeginX:14.66321, VectorBeginY:31.53731, VectorEndX:-16.35591, VectorEndY:31.53731, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:27.840 [Thd =46]  Info Default ***row:14, vectorBeginX:14.663, vectorBeginY:31.537, captureBeginX:11.098, captureBeginY:31.537, captureEndX:-12.399, captureEndY:31.537, vectorEndX:-16.356, vectorEndY:31.537
2025-09-13 09:53:27.840 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:27.841 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975280687609,EndPoint:12.3993463039495
2025-09-13 09:53:28.290 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:28
2025-09-13 09:53:28.355 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:28
2025-09-13 09:53:28.357 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:28
2025-09-13 09:53:28.428 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:28
2025-09-13 09:53:29.040 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:14
2025-09-13 09:53:29.041 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:29.041 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:29.042 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:14
2025-09-13 09:53:29.042 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:29.042 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:B_SourceLightType
2025-09-13 09:53:29.042 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:A_SourceLightType
2025-09-13 09:53:29.042 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,B_SourceLightType
2025-09-13 09:53:29.042 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,A_SourceLightType
2025-09-13 09:53:29.093 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:29.095 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_14_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:29.143 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:29.146 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_14_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:29.307 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;14/120,
2025-09-13 09:53:29.316 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:29.361 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:29.711 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 15
2025-09-13 09:53:29.711 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 15
2025-09-13 09:53:29.711 [Thd =38]  Info Default  开始扫描条带； [15/120]
2025-09-13 09:53:29.713 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:29.716 [Thd =46]  Info Default ***row:15, vectorBeginX:-16.356, vectorBeginY:31.110, captureBeginX:-12.736, captureBeginY:31.110, captureEndX:10.761, captureEndY:31.110, vectorEndX:14.663, vectorEndY:31.110
2025-09-13 09:53:29.716 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:29.717 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736162678911,EndPoint:-10.7607116937994
2025-09-13 09:53:30.920 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:15
2025-09-13 09:53:30.920 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:30.920 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:30.921 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:15
2025-09-13 09:53:30.921 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:30.925 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:A_SourceLightType
2025-09-13 09:53:30.925 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:B_SourceLightType
2025-09-13 09:53:30.925 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,A_SourceLightType
2025-09-13 09:53:30.925 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,B_SourceLightType
2025-09-13 09:53:30.976 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:30.978 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_15_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:31.028 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:31.029 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_15_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:31.187 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;15/120,
2025-09-13 09:53:31.196 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:31.237 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:31.589 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 16
2025-09-13 09:53:31.589 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 16
2025-09-13 09:53:31.589 [Thd =47]  Info Default  开始扫描条带； [16/120]
2025-09-13 09:53:31.592 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:31.594 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:30.68221, CaptureEndX:-12.39935, CaptureEndY:30.68221, VectorBeginX:14.66320, VectorBeginY:30.68221, VectorEndX:-16.35591, VectorEndY:30.68221, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:31.594 [Thd =46]  Info Default ***row:16, vectorBeginX:14.663, vectorBeginY:30.682, captureBeginX:11.098, captureBeginY:30.682, captureEndX:-12.399, captureEndY:30.682, vectorEndX:-16.356, vectorEndY:30.682
2025-09-13 09:53:31.595 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:31.596 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975278245608,EndPoint:12.3993465481496
2025-09-13 09:53:31.991 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:31
2025-09-13 09:53:32.050 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:32
2025-09-13 09:53:32.704 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:32
2025-09-13 09:53:32.766 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:32
2025-09-13 09:53:32.796 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:16
2025-09-13 09:53:32.797 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:32.797 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:32.798 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:16
2025-09-13 09:53:32.798 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:32.798 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:B_SourceLightType
2025-09-13 09:53:32.798 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:A_SourceLightType
2025-09-13 09:53:32.798 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,B_SourceLightType
2025-09-13 09:53:32.798 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,A_SourceLightType
2025-09-13 09:53:32.852 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:32.855 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_16_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:32.902 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:32.904 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_16_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:33.067 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;16/120,
2025-09-13 09:53:33.076 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:33.254 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:33.602 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 17
2025-09-13 09:53:33.602 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 17
2025-09-13 09:53:33.602 [Thd =196]  Info Default  开始扫描条带； [17/120]
2025-09-13 09:53:33.605 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:33.607 [Thd =46]  Info Default ***row:17, vectorBeginX:-16.356, vectorBeginY:30.255, captureBeginX:-12.736, captureBeginY:30.255, captureEndX:10.761, captureEndY:30.255, vectorEndX:14.663, vectorEndY:30.255
2025-09-13 09:53:33.608 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:33.608 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361577960985,EndPoint:-10.7607165766119
2025-09-13 09:53:34.811 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:17
2025-09-13 09:53:34.811 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:34.811 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:34.812 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:17
2025-09-13 09:53:34.812 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:34.812 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:A_SourceLightType
2025-09-13 09:53:34.812 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:B_SourceLightType
2025-09-13 09:53:34.812 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,A_SourceLightType
2025-09-13 09:53:34.812 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,B_SourceLightType
2025-09-13 09:53:34.865 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:34.868 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_17_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:34.928 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:34.930 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_17_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:35.055 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:35
2025-09-13 09:53:35.077 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;17/120,
2025-09-13 09:53:35.080 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:35
2025-09-13 09:53:35.086 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:35.142 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:35.492 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 18
2025-09-13 09:53:35.492 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 18
2025-09-13 09:53:35.492 [Thd =38]  Info Default  开始扫描条带； [18/120]
2025-09-13 09:53:35.499 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:35.501 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:29.82712, CaptureEndX:-12.39934, CaptureEndY:29.82712, VectorBeginX:14.66321, VectorBeginY:29.82712, VectorEndX:-16.35591, VectorEndY:29.82712, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:35.501 [Thd =46]  Info Default ***row:18, vectorBeginX:14.663, vectorBeginY:29.827, captureBeginX:11.098, captureBeginY:29.827, captureEndX:-12.399, captureEndY:29.827, vectorEndX:-16.356, vectorEndY:29.827
2025-09-13 09:53:35.501 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:35.503 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975296556765,EndPoint:12.3993447170339
2025-09-13 09:53:35.581 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:35
2025-09-13 09:53:35.601 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:35
2025-09-13 09:53:36.702 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:18
2025-09-13 09:53:36.702 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:36.702 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:36.703 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:18
2025-09-13 09:53:36.703 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:36.703 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:A_SourceLightType
2025-09-13 09:53:36.703 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,A_SourceLightType
2025-09-13 09:53:36.703 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,B_SourceLightType
2025-09-13 09:53:36.703 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:B_SourceLightType
2025-09-13 09:53:36.768 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:36.770 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_18_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:36.818 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:36.820 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_18_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:36.976 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;18/120,
2025-09-13 09:53:36.985 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:37.025 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:37.372 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 19
2025-09-13 09:53:37.372 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 19
2025-09-13 09:53:37.372 [Thd =66]  Info Default  开始扫描条带； [19/120]
2025-09-13 09:53:37.374 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:37.377 [Thd =46]  Info Default ***row:19, vectorBeginX:-16.356, vectorBeginY:29.400, captureBeginX:-12.736, captureBeginY:29.400, captureEndX:10.761, captureEndY:29.400, vectorEndX:14.663, vectorEndY:29.400
2025-09-13 09:53:37.377 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:37.378 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736155232622,EndPoint:-10.7607191400884
2025-09-13 09:53:38.581 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:19
2025-09-13 09:53:38.581 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:38.581 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:38.582 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:19
2025-09-13 09:53:38.582 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:38.582 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:B_SourceLightType
2025-09-13 09:53:38.582 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:A_SourceLightType
2025-09-13 09:53:38.582 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,B_SourceLightType
2025-09-13 09:53:38.582 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,A_SourceLightType
2025-09-13 09:53:38.628 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:38.630 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_19_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:38.685 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:38.686 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_19_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:38.844 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;19/120,
2025-09-13 09:53:38.853 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:38.897 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:39.246 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 20
2025-09-13 09:53:39.246 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 20
2025-09-13 09:53:39.246 [Thd =19]  Info Default  开始扫描条带； [20/120]
2025-09-13 09:53:39.248 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:39.250 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:28.97202, CaptureEndX:-12.39934, CaptureEndY:28.97202, VectorBeginX:14.66321, VectorBeginY:28.97202, VectorEndX:-16.35591, VectorEndY:28.97202, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:39.250 [Thd =46]  Info Default ***row:20, vectorBeginX:14.663, vectorBeginY:28.972, captureBeginX:11.098, captureBeginY:28.972, captureEndX:-12.399, captureEndY:28.972, vectorEndX:-16.356, vectorEndY:28.972
2025-09-13 09:53:39.250 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:39.251 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975328905718,EndPoint:12.3993414821386
2025-09-13 09:53:39.906 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:39
2025-09-13 09:53:39.925 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:39
2025-09-13 09:53:40.451 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:20
2025-09-13 09:53:40.451 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:40.451 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:40.452 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:20
2025-09-13 09:53:40.452 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:40.452 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:A_SourceLightType
2025-09-13 09:53:40.452 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:B_SourceLightType
2025-09-13 09:53:40.452 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,A_SourceLightType
2025-09-13 09:53:40.452 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,B_SourceLightType
2025-09-13 09:53:40.499 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:40.501 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_20_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:40.549 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:40.551 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_20_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:40.724 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;20/120,
2025-09-13 09:53:40.733 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:40.779 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:41.129 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 21
2025-09-13 09:53:41.129 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 21
2025-09-13 09:53:41.129 [Thd =112]  Info Default  开始扫描条带； [21/120]
2025-09-13 09:53:41.134 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:41.137 [Thd =46]  Info Default ***row:21, vectorBeginX:-16.356, vectorBeginY:28.544, captureBeginX:-12.736, captureBeginY:28.544, captureEndX:10.761, captureEndY:28.544, vectorEndX:14.663, vectorEndY:28.544
2025-09-13 09:53:41.137 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:41.138 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361494342821,EndPoint:-10.7607249384283
2025-09-13 09:53:41.482 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:41
2025-09-13 09:53:41.520 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:41
2025-09-13 09:53:42.342 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:21
2025-09-13 09:53:42.342 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:42.342 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:42.343 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:21
2025-09-13 09:53:42.343 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:42.343 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:B_SourceLightType
2025-09-13 09:53:42.343 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:A_SourceLightType
2025-09-13 09:53:42.343 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,B_SourceLightType
2025-09-13 09:53:42.343 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,A_SourceLightType
2025-09-13 09:53:42.393 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:42.396 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_21_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:42.446 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:42.447 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_21_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:42.608 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;21/120,
2025-09-13 09:53:42.617 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:42.656 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:42.983 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:42
2025-09-13 09:53:43.000 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:43
2025-09-13 09:53:43.006 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 22
2025-09-13 09:53:43.006 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 22
2025-09-13 09:53:43.006 [Thd =47]  Info Default  开始扫描条带； [22/120]
2025-09-13 09:53:43.008 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:43.011 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:28.11693, CaptureEndX:-12.39934, CaptureEndY:28.11693, VectorBeginX:14.66321, VectorBeginY:28.11693, VectorEndX:-16.35590, VectorEndY:28.11693, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:43.011 [Thd =46]  Info Default ***row:22, vectorBeginX:14.663, vectorBeginY:28.117, captureBeginX:11.098, captureBeginY:28.117, captureEndX:-12.399, captureEndY:28.117, vectorEndX:-16.356, vectorEndY:28.117
2025-09-13 09:53:43.011 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:43.012 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975378344919,EndPoint:12.3993365382185
2025-09-13 09:53:44.212 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:22
2025-09-13 09:53:44.212 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:44.212 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:44.213 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:22
2025-09-13 09:53:44.213 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:44.213 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:A_SourceLightType
2025-09-13 09:53:44.213 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:B_SourceLightType
2025-09-13 09:53:44.213 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,A_SourceLightType
2025-09-13 09:53:44.213 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,B_SourceLightType
2025-09-13 09:53:44.270 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:44.272 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_22_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:44.319 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:44.321 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_22_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:44.482 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;22/120,
2025-09-13 09:53:44.491 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:44.541 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:44.847 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:44
2025-09-13 09:53:44.881 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 23
2025-09-13 09:53:44.881 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 23
2025-09-13 09:53:44.881 [Thd =180]  Info Default  开始扫描条带； [23/120]
2025-09-13 09:53:44.884 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:44.886 [Thd =46]  Info Default ***row:23, vectorBeginX:-16.356, vectorBeginY:27.689, captureBeginX:-12.736, captureBeginY:27.689, captureEndX:10.761, captureEndY:27.689, vectorEndX:14.663, vectorEndY:27.689
2025-09-13 09:53:44.887 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:44.888 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361464435595,EndPoint:-10.7607279291509
2025-09-13 09:53:44.895 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:44
2025-09-13 09:53:45.397 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:45
2025-09-13 09:53:45.414 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:45
2025-09-13 09:53:46.090 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:23
2025-09-13 09:53:46.090 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:46.090 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:46.091 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:23
2025-09-13 09:53:46.091 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:46.091 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:A_SourceLightType
2025-09-13 09:53:46.091 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:B_SourceLightType
2025-09-13 09:53:46.091 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,A_SourceLightType
2025-09-13 09:53:46.091 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,B_SourceLightType
2025-09-13 09:53:46.139 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:46.141 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_23_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:46.192 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:46.196 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_23_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:46.353 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;23/120,
2025-09-13 09:53:46.363 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:46.412 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:46.763 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 24
2025-09-13 09:53:46.763 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 24
2025-09-13 09:53:46.763 [Thd =196]  Info Default  开始扫描条带； [24/120]
2025-09-13 09:53:46.765 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:46.768 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:27.26184, CaptureEndX:-12.39934, CaptureEndY:27.26184, VectorBeginX:14.66321, VectorBeginY:27.26184, VectorEndX:-16.35590, VectorEndY:27.26184, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:46.768 [Thd =46]  Info Default ***row:24, vectorBeginX:14.663, vectorBeginY:27.262, captureBeginX:11.098, captureBeginY:27.262, captureEndX:-12.399, captureEndY:27.262, vectorEndX:-16.356, vectorEndY:27.262
2025-09-13 09:53:46.768 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:46.769 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975372241778,EndPoint:12.3993371485326
2025-09-13 09:53:47.968 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:24
2025-09-13 09:53:47.968 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:47.968 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:47.970 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:24
2025-09-13 09:53:47.970 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:47.970 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:A_SourceLightType
2025-09-13 09:53:47.970 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:B_SourceLightType
2025-09-13 09:53:47.970 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,A_SourceLightType
2025-09-13 09:53:47.970 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,B_SourceLightType
2025-09-13 09:53:48.032 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:48.034 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_24_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:48.089 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:48.090 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_24_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:48.237 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;24/120,
2025-09-13 09:53:48.246 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:48.358 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:48.708 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 25
2025-09-13 09:53:48.708 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 25
2025-09-13 09:53:48.708 [Thd =213]  Info Default  开始扫描条带； [25/120]
2025-09-13 09:53:48.710 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:48.713 [Thd =46]  Info Default ***row:25, vectorBeginX:-16.356, vectorBeginY:26.834, captureBeginX:-12.736, captureBeginY:26.834, captureEndX:10.761, captureEndY:26.834, vectorEndX:14.663, vectorEndY:26.834
2025-09-13 09:53:48.713 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:48.714 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361539508837,EndPoint:-10.7607204218267
2025-09-13 09:53:48.952 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:48
2025-09-13 09:53:48.999 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:48
2025-09-13 09:53:49.917 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:25
2025-09-13 09:53:49.917 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:49.917 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:49.917 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:25
2025-09-13 09:53:49.917 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:49.917 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:A_SourceLightType
2025-09-13 09:53:49.917 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,A_SourceLightType
2025-09-13 09:53:49.917 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,B_SourceLightType
2025-09-13 09:53:49.917 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:B_SourceLightType
2025-09-13 09:53:49.965 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:49.967 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_25_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:50.032 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:50.036 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_25_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:50.186 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;25/120,
2025-09-13 09:53:50.195 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:50.235 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:50.574 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 26
2025-09-13 09:53:50.574 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 26
2025-09-13 09:53:50.574 [Thd =172]  Info Default  开始扫描条带； [26/120]
2025-09-13 09:53:50.576 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:50.578 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:26.40674, CaptureEndX:-12.39934, CaptureEndY:26.40674, VectorBeginX:14.66321, VectorBeginY:26.40674, VectorEndX:-16.35591, VectorEndY:26.40674, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:50.578 [Thd =46]  Info Default ***row:26, vectorBeginX:14.663, vectorBeginY:26.407, captureBeginX:11.098, captureBeginY:26.407, captureEndX:-12.399, captureEndY:26.407, vectorEndX:-16.356, vectorEndY:26.407
2025-09-13 09:53:50.578 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:50.580 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975339892206,EndPoint:12.3993403834898
2025-09-13 09:53:50.841 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:50
2025-09-13 09:53:50.895 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:50
2025-09-13 09:53:51.779 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:26
2025-09-13 09:53:51.780 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:51.780 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:51.780 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:26
2025-09-13 09:53:51.780 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:51.780 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:A_SourceLightType
2025-09-13 09:53:51.780 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:B_SourceLightType
2025-09-13 09:53:51.780 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,A_SourceLightType
2025-09-13 09:53:51.781 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,B_SourceLightType
2025-09-13 09:53:51.835 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:51.837 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_26_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:51.888 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:51.889 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_26_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:52.050 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;26/120,
2025-09-13 09:53:52.059 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:52.228 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:52.567 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 27
2025-09-13 09:53:52.567 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 27
2025-09-13 09:53:52.567 [Thd =151]  Info Default  开始扫描条带； [27/120]
2025-09-13 09:53:52.569 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:52.572 [Thd =46]  Info Default ***row:27, vectorBeginX:-16.356, vectorBeginY:25.979, captureBeginX:-12.736, captureBeginY:25.979, captureEndX:10.761, captureEndY:25.979, vectorEndX:14.663, vectorEndY:25.979
2025-09-13 09:53:52.572 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:52.573 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361479694384,EndPoint:-10.760726403272
2025-09-13 09:53:52.756 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:52
2025-09-13 09:53:52.782 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:52
2025-09-13 09:53:53.776 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:27
2025-09-13 09:53:53.776 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:53.776 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:53.776 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:27
2025-09-13 09:53:53.776 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:53.776 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:B_SourceLightType
2025-09-13 09:53:53.776 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,B_SourceLightType
2025-09-13 09:53:53.776 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,A_SourceLightType
2025-09-13 09:53:53.776 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:A_SourceLightType
2025-09-13 09:53:53.824 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:53.826 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_27_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:53.875 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:53.877 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_27_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:54.044 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;27/120,
2025-09-13 09:53:54.053 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:54.093 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:54.442 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 28
2025-09-13 09:53:54.442 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 28
2025-09-13 09:53:54.442 [Thd =19]  Info Default  开始扫描条带； [28/120]
2025-09-13 09:53:54.444 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:54.447 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:25.55164, CaptureEndX:-12.39934, CaptureEndY:25.55164, VectorBeginX:14.66322, VectorBeginY:25.55164, VectorEndX:-16.35590, VectorEndY:25.55164, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:54.447 [Thd =46]  Info Default ***row:28, vectorBeginX:14.663, vectorBeginY:25.552, captureBeginX:11.098, captureBeginY:25.552, captureEndX:-12.399, captureEndY:25.552, vectorEndX:-16.356, vectorEndY:25.552
2025-09-13 09:53:54.447 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:54.448 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975383838267,EndPoint:12.3993359888837
2025-09-13 09:53:54.457 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:54
2025-09-13 09:53:54.505 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:54
2025-09-13 09:53:55.647 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:28
2025-09-13 09:53:55.647 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:55.647 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:55.649 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:28
2025-09-13 09:53:55.649 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:55.649 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:B_SourceLightType
2025-09-13 09:53:55.649 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:A_SourceLightType
2025-09-13 09:53:55.649 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,B_SourceLightType
2025-09-13 09:53:55.649 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,A_SourceLightType
2025-09-13 09:53:55.713 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:55.714 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_28_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:55.765 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:55.767 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_28_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:55.915 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;28/120,
2025-09-13 09:53:55.924 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:55.966 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:56.290 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:56
2025-09-13 09:53:56.307 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:56
2025-09-13 09:53:56.316 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 29
2025-09-13 09:53:56.316 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 29
2025-09-13 09:53:56.316 [Thd =36]  Info Default  开始扫描条带； [29/120]
2025-09-13 09:53:56.318 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:53:56.320 [Thd =46]  Info Default ***row:29, vectorBeginX:-16.356, vectorBeginY:25.124, captureBeginX:-12.736, captureBeginY:25.124, captureEndX:10.761, captureEndY:25.124, vectorEndX:14.663, vectorEndY:25.124
2025-09-13 09:53:56.320 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:56.321 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361496784228,EndPoint:-10.7607246942876
2025-09-13 09:53:56.581 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:56
2025-09-13 09:53:56.638 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:56
2025-09-13 09:53:57.523 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:29
2025-09-13 09:53:57.524 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:57.524 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:57.525 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:29
2025-09-13 09:53:57.525 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:57.525 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:B_SourceLightType
2025-09-13 09:53:57.525 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,B_SourceLightType
2025-09-13 09:53:57.525 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:A_SourceLightType
2025-09-13 09:53:57.525 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,A_SourceLightType
2025-09-13 09:53:57.576 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:57.578 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_29_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:57.637 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:57.638 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_29_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:57.785 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;29/120,
2025-09-13 09:53:57.794 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:57.839 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:53:58.143 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:53:58
2025-09-13 09:53:58.168 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:53:58
2025-09-13 09:53:58.180 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 30
2025-09-13 09:53:58.180 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 30
2025-09-13 09:53:58.180 [Thd =48]  Info Default  开始扫描条带； [30/120]
2025-09-13 09:53:58.182 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:53:58.187 [Thd =46]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:24.69654, CaptureEndX:-12.39934, CaptureEndY:24.69654, VectorBeginX:14.66321, VectorBeginY:24.69654, VectorEndX:-16.35591, VectorEndY:24.69654, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:53:58.187 [Thd =46]  Info Default ***row:30, vectorBeginX:14.663, vectorBeginY:24.697, captureBeginX:11.098, captureBeginY:24.697, captureEndX:-12.399, captureEndY:24.697, vectorEndX:-16.356, vectorEndY:24.697
2025-09-13 09:53:58.188 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:53:58.189 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975345385904,EndPoint:12.39933983412
2025-09-13 09:53:59.389 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:30
2025-09-13 09:53:59.390 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:59.390 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:53:59.390 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:30
2025-09-13 09:53:59.390 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:53:59.390 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:A_SourceLightType
2025-09-13 09:53:59.390 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:B_SourceLightType
2025-09-13 09:53:59.390 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,A_SourceLightType
2025-09-13 09:53:59.390 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,B_SourceLightType
2025-09-13 09:53:59.443 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:53:59.445 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_30_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:59.495 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:53:59.497 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_30_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:53:59.654 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;30/120,
2025-09-13 09:53:59.663 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:53:59.801 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:00.078 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:00
2025-09-13 09:54:00.095 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:00
2025-09-13 09:54:00.149 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 31
2025-09-13 09:54:00.149 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 31
2025-09-13 09:54:00.149 [Thd =180]  Info Default  开始扫描条带； [31/120]
2025-09-13 09:54:00.152 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:00.155 [Thd =46]  Info Default ***row:31, vectorBeginX:-16.356, vectorBeginY:24.269, captureBeginX:-12.736, captureBeginY:24.269, captureEndX:10.761, captureEndY:24.269, vectorEndX:14.663, vectorEndY:24.269
2025-09-13 09:54:00.155 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:00.156 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361506549853,EndPoint:-10.7607237177252
2025-09-13 09:54:01.358 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:31
2025-09-13 09:54:01.358 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:01.358 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:01.360 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:31
2025-09-13 09:54:01.360 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:01.360 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:B_SourceLightType
2025-09-13 09:54:01.360 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:A_SourceLightType
2025-09-13 09:54:01.360 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,B_SourceLightType
2025-09-13 09:54:01.360 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,A_SourceLightType
2025-09-13 09:54:01.409 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:01.410 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_31_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:01.461 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:01.462 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_31_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:01.623 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;31/120,
2025-09-13 09:54:01.632 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:01.736 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:02.087 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 32
2025-09-13 09:54:02.087 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 32
2025-09-13 09:54:02.087 [Thd =221]  Info Default  开始扫描条带； [32/120]
2025-09-13 09:54:02.090 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:02.092 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:23.84144, CaptureEndX:-12.39934, CaptureEndY:23.84144, VectorBeginX:14.66321, VectorBeginY:23.84144, VectorEndX:-16.35590, VectorEndY:23.84144, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:02.092 [Thd =46]  Info Default ***row:32, vectorBeginX:14.663, vectorBeginY:23.841, captureBeginX:11.098, captureBeginY:23.841, captureEndX:-12.399, captureEndY:23.841, vectorEndX:-16.356, vectorEndY:23.841
2025-09-13 09:54:02.092 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:02.093 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975374072306,EndPoint:12.3993369654798
2025-09-13 09:54:03.296 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:32
2025-09-13 09:54:03.296 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:03.296 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:03.297 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:32
2025-09-13 09:54:03.297 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:03.297 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:B_SourceLightType
2025-09-13 09:54:03.297 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,B_SourceLightType
2025-09-13 09:54:03.297 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,A_SourceLightType
2025-09-13 09:54:03.297 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:A_SourceLightType
2025-09-13 09:54:03.346 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:03.347 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_32_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:03.399 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:03.408 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_32_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:03.564 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;32/120,
2025-09-13 09:54:03.573 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:04.010 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:04.351 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 33
2025-09-13 09:54:04.351 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 33
2025-09-13 09:54:04.351 [Thd =112]  Info Default  开始扫描条带； [33/120]
2025-09-13 09:54:04.353 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:04.356 [Thd =46]  Info Default ***row:33, vectorBeginX:-16.356, vectorBeginY:23.414, captureBeginX:-12.736, captureBeginY:23.414, captureEndX:10.761, captureEndY:23.414, vectorEndX:14.663, vectorEndY:23.414
2025-09-13 09:54:04.356 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:04.357 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736151326372,EndPoint:-10.7607230463384
2025-09-13 09:54:04.674 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:04
2025-09-13 09:54:04.715 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:04
2025-09-13 09:54:05.041 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:05
2025-09-13 09:54:05.089 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:05
2025-09-13 09:54:05.559 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:33
2025-09-13 09:54:05.560 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:05.560 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:05.561 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:33
2025-09-13 09:54:05.562 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:05.562 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:B_SourceLightType
2025-09-13 09:54:05.562 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:A_SourceLightType
2025-09-13 09:54:05.562 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,B_SourceLightType
2025-09-13 09:54:05.562 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,A_SourceLightType
2025-09-13 09:54:05.617 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:05.619 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_33_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:05.683 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:05.685 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_33_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:05.829 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;33/120,
2025-09-13 09:54:05.838 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:05.882 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:06.226 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 34
2025-09-13 09:54:06.226 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 34
2025-09-13 09:54:06.226 [Thd =150]  Info Default  开始扫描条带； [34/120]
2025-09-13 09:54:06.230 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:06.232 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:22.98634, CaptureEndX:-12.39933, CaptureEndY:22.98634, VectorBeginX:14.66322, VectorBeginY:22.98634, VectorEndX:-16.35590, VectorEndY:22.98634, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:06.232 [Thd =46]  Info Default ***row:34, vectorBeginX:14.663, vectorBeginY:22.986, captureBeginX:11.098, captureBeginY:22.986, captureEndX:-12.399, captureEndY:22.986, vectorEndX:-16.356, vectorEndY:22.986
2025-09-13 09:54:06.233 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:06.234 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975405810503,EndPoint:12.3993337916601
2025-09-13 09:54:07.078 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:07
2025-09-13 09:54:07.104 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:07
2025-09-13 09:54:07.436 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:34
2025-09-13 09:54:07.437 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:07.437 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:07.437 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:34
2025-09-13 09:54:07.437 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:07.437 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:A_SourceLightType
2025-09-13 09:54:07.437 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:B_SourceLightType
2025-09-13 09:54:07.437 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,A_SourceLightType
2025-09-13 09:54:07.437 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,B_SourceLightType
2025-09-13 09:54:07.493 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:07.495 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_34_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:07.553 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:07.555 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_34_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:07.706 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;34/120,
2025-09-13 09:54:07.715 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:07.765 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:08.116 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 35
2025-09-13 09:54:08.116 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 35
2025-09-13 09:54:08.116 [Thd =131]  Info Default  开始扫描条带； [35/120]
2025-09-13 09:54:08.118 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:08.121 [Thd =46]  Info Default ***row:35, vectorBeginX:-16.356, vectorBeginY:22.559, captureBeginX:-12.736, captureBeginY:22.559, captureEndX:10.761, captureEndY:22.559, vectorEndX:14.663, vectorEndY:22.559
2025-09-13 09:54:08.121 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:08.122 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361480304735,EndPoint:-10.7607263422369
2025-09-13 09:54:08.337 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:08
2025-09-13 09:54:08.356 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:08
2025-09-13 09:54:09.324 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:35
2025-09-13 09:54:09.324 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:09.324 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:09.325 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:35
2025-09-13 09:54:09.325 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:09.325 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:A_SourceLightType
2025-09-13 09:54:09.325 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,A_SourceLightType
2025-09-13 09:54:09.325 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,B_SourceLightType
2025-09-13 09:54:09.325 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:B_SourceLightType
2025-09-13 09:54:09.373 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:09.375 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_35_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:09.426 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:09.428 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_35_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:09.590 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;35/120,
2025-09-13 09:54:09.600 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:09.699 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:10.048 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 36
2025-09-13 09:54:10.048 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 36
2025-09-13 09:54:10.048 [Thd =57]  Info Default  开始扫描条带； [36/120]
2025-09-13 09:54:10.050 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:10.053 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:22.13125, CaptureEndX:-12.39933, CaptureEndY:22.13125, VectorBeginX:14.66322, VectorBeginY:22.13125, VectorEndX:-16.35590, VectorEndY:22.13125, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:10.053 [Thd =46]  Info Default ***row:36, vectorBeginX:14.663, vectorBeginY:22.131, captureBeginX:11.098, captureBeginY:22.131, captureEndX:-12.399, captureEndY:22.131, vectorEndX:-16.356, vectorEndY:22.131
2025-09-13 09:54:10.053 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:10.054 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097541557654,EndPoint:12.3993328150564
2025-09-13 09:54:11.265 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:36
2025-09-13 09:54:11.265 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:11.265 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:11.279 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:36
2025-09-13 09:54:11.279 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:11.279 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:B_SourceLightType
2025-09-13 09:54:11.279 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:A_SourceLightType
2025-09-13 09:54:11.279 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,B_SourceLightType
2025-09-13 09:54:11.279 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,A_SourceLightType
2025-09-13 09:54:11.328 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:11.330 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_36_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:11.380 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:11.382 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_36_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:11.521 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;36/120,
2025-09-13 09:54:11.529 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:11.639 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:11.989 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 37
2025-09-13 09:54:11.989 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 37
2025-09-13 09:54:11.989 [Thd =48]  Info Default  开始扫描条带； [37/120]
2025-09-13 09:54:11.991 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:11.993 [Thd =46]  Info Default ***row:37, vectorBeginX:-16.356, vectorBeginY:21.704, captureBeginX:-12.736, captureBeginY:21.704, captureEndX:10.761, captureEndY:21.704, vectorEndX:14.663, vectorEndY:21.704
2025-09-13 09:54:11.993 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:11.994 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361471149462,EndPoint:-10.7607272577642
2025-09-13 09:54:12.431 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:12
2025-09-13 09:54:12.457 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:12
2025-09-13 09:54:13.196 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:37
2025-09-13 09:54:13.196 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:13.196 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:13.197 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:37
2025-09-13 09:54:13.197 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:13.197 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:B_SourceLightType
2025-09-13 09:54:13.197 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,B_SourceLightType
2025-09-13 09:54:13.197 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,A_SourceLightType
2025-09-13 09:54:13.197 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:A_SourceLightType
2025-09-13 09:54:13.245 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:13.246 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_37_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:13.299 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:13.301 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_37_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:13.469 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;37/120,
2025-09-13 09:54:13.478 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:13.596 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:13.800 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:13
2025-09-13 09:54:13.848 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:13
2025-09-13 09:54:13.947 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 38
2025-09-13 09:54:13.947 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 38
2025-09-13 09:54:13.947 [Thd =19]  Info Default  开始扫描条带； [38/120]
2025-09-13 09:54:13.950 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:13.952 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:21.27615, CaptureEndX:-12.39933, CaptureEndY:21.27615, VectorBeginX:14.66322, VectorBeginY:21.27615, VectorEndX:-16.35590, VectorEndY:21.27615, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:13.952 [Thd =46]  Info Default ***row:38, vectorBeginX:14.663, vectorBeginY:21.276, captureBeginX:11.098, captureBeginY:21.276, captureEndX:-12.399, captureEndY:21.276, vectorEndX:-16.356, vectorEndY:21.276
2025-09-13 09:54:13.952 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:13.954 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975435718256,EndPoint:12.3993308008848
2025-09-13 09:54:14.449 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:14
2025-09-13 09:54:14.498 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:14
2025-09-13 09:54:15.155 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:38
2025-09-13 09:54:15.155 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:15.155 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:15.156 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:38
2025-09-13 09:54:15.156 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:15.156 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:B_SourceLightType
2025-09-13 09:54:15.156 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,B_SourceLightType
2025-09-13 09:54:15.156 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,A_SourceLightType
2025-09-13 09:54:15.156 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:A_SourceLightType
2025-09-13 09:54:15.207 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:15.209 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_38_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:15.257 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:15.259 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_38_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:15.421 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;38/120,
2025-09-13 09:54:15.430 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:15.480 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:15.830 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 39
2025-09-13 09:54:15.830 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 39
2025-09-13 09:54:15.830 [Thd =221]  Info Default  开始扫描条带； [39/120]
2025-09-13 09:54:15.832 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:15.835 [Thd =46]  Info Default ***row:39, vectorBeginX:-16.356, vectorBeginY:20.849, captureBeginX:-12.736, captureBeginY:20.849, captureEndX:10.761, captureEndY:20.849, vectorEndX:14.663, vectorEndY:20.849
2025-09-13 09:54:15.835 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:15.836 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361455280321,EndPoint:-10.7607288446783
2025-09-13 09:54:17.038 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:39
2025-09-13 09:54:17.039 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:17.039 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:17.039 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:39
2025-09-13 09:54:17.039 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:17.039 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:A_SourceLightType
2025-09-13 09:54:17.039 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:B_SourceLightType
2025-09-13 09:54:17.039 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,A_SourceLightType
2025-09-13 09:54:17.039 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,B_SourceLightType
2025-09-13 09:54:17.090 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:17.092 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_39_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:17.137 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:17.138 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_39_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:17.273 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:17
2025-09-13 09:54:17.303 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;39/120,
2025-09-13 09:54:17.312 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:17.321 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:17
2025-09-13 09:54:17.475 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:17.814 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 40
2025-09-13 09:54:17.814 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 40
2025-09-13 09:54:17.814 [Thd =57]  Info Default  开始扫描条带； [40/120]
2025-09-13 09:54:17.817 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:17.819 [Thd =46]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:20.42105, CaptureEndX:-12.39933, CaptureEndY:20.42105, VectorBeginX:14.66322, VectorBeginY:20.42105, VectorEndX:-16.35590, VectorEndY:20.42105, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:17.819 [Thd =46]  Info Default ***row:40, vectorBeginX:14.663, vectorBeginY:20.421, captureBeginX:11.098, captureBeginY:20.421, captureEndX:-12.399, captureEndY:20.421, vectorEndX:-16.356, vectorEndY:20.421
2025-09-13 09:54:17.819 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:17.821 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975447315134,EndPoint:12.399329641197
2025-09-13 09:54:18.158 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:18
2025-09-13 09:54:18.185 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:18
2025-09-13 09:54:19.023 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:40
2025-09-13 09:54:19.023 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:19.023 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:19.024 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:40
2025-09-13 09:54:19.024 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:19.024 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:B_SourceLightType
2025-09-13 09:54:19.024 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:A_SourceLightType
2025-09-13 09:54:19.024 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,B_SourceLightType
2025-09-13 09:54:19.024 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,A_SourceLightType
2025-09-13 09:54:19.076 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:19.078 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_40_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:19.124 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:19.126 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_40_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:19.298 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;40/120,
2025-09-13 09:54:19.307 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:19.350 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:19.699 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 41
2025-09-13 09:54:19.699 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 41
2025-09-13 09:54:19.699 [Thd =222]  Info Default  开始扫描条带； [41/120]
2025-09-13 09:54:19.701 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:19.704 [Thd =46]  Info Default ***row:41, vectorBeginX:-16.356, vectorBeginY:19.993, captureBeginX:-12.736, captureBeginY:19.993, captureEndX:10.761, captureEndY:19.993, vectorEndX:14.663, vectorEndY:19.993
2025-09-13 09:54:19.704 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:19.705 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361374103563,EndPoint:-10.7607369623541
2025-09-13 09:54:20.908 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:41
2025-09-13 09:54:20.908 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:20.908 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:20.909 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:41
2025-09-13 09:54:20.909 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:20.909 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:B_SourceLightType
2025-09-13 09:54:20.909 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:A_SourceLightType
2025-09-13 09:54:20.909 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,B_SourceLightType
2025-09-13 09:54:20.909 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,A_SourceLightType
2025-09-13 09:54:20.962 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:20.964 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_41_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:21.011 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:21.013 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_41_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:21.174 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;41/120,
2025-09-13 09:54:21.183 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:21.232 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:21.581 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 42
2025-09-13 09:54:21.581 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 42
2025-09-13 09:54:21.581 [Thd =150]  Info Default  开始扫描条带； [42/120]
2025-09-13 09:54:21.583 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:21.585 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:19.56595, CaptureEndX:-12.39932, CaptureEndY:19.56595, VectorBeginX:14.66323, VectorBeginY:19.56595, VectorEndX:-16.35589, VectorEndY:19.56595, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:21.586 [Thd =46]  Info Default ***row:42, vectorBeginX:14.663, vectorBeginY:19.566, captureBeginX:11.098, captureBeginY:19.566, captureEndX:-12.399, captureEndY:19.566, vectorEndX:-16.356, vectorEndY:19.566
2025-09-13 09:54:21.586 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:21.586 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975507740954,EndPoint:12.399323598615
2025-09-13 09:54:21.604 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:21
2025-09-13 09:54:21.662 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:21
2025-09-13 09:54:21.663 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:21
2025-09-13 09:54:21.735 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:21
2025-09-13 09:54:22.788 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:42
2025-09-13 09:54:22.788 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:22.788 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:22.789 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:42
2025-09-13 09:54:22.789 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:22.789 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:B_SourceLightType
2025-09-13 09:54:22.789 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:A_SourceLightType
2025-09-13 09:54:22.789 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,B_SourceLightType
2025-09-13 09:54:22.789 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,A_SourceLightType
2025-09-13 09:54:22.835 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:22.838 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_42_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:22.887 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:22.889 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_42_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:23.058 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;42/120,
2025-09-13 09:54:23.067 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:23.258 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:23.610 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 43
2025-09-13 09:54:23.610 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 43
2025-09-13 09:54:23.610 [Thd =111]  Info Default  开始扫描条带； [43/120]
2025-09-13 09:54:23.613 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:23.615 [Thd =46]  Info Default ***row:43, vectorBeginX:-16.356, vectorBeginY:19.138, captureBeginX:-12.736, captureBeginY:19.138, captureEndX:10.761, captureEndY:19.138, vectorEndX:14.663, vectorEndY:19.138
2025-09-13 09:54:23.615 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:23.616 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361344196337,EndPoint:-10.7607399530767
2025-09-13 09:54:24.037 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:24
2025-09-13 09:54:24.098 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:24
2025-09-13 09:54:24.819 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:43
2025-09-13 09:54:24.819 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:24.819 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:24.819 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:43
2025-09-13 09:54:24.819 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:24.819 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:A_SourceLightType
2025-09-13 09:54:24.820 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:B_SourceLightType
2025-09-13 09:54:24.820 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,A_SourceLightType
2025-09-13 09:54:24.820 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,B_SourceLightType
2025-09-13 09:54:24.867 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:24.869 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_43_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:24.921 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:24.923 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_43_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:25.082 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;43/120,
2025-09-13 09:54:25.091 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:25.213 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:25.562 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 44
2025-09-13 09:54:25.562 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 44
2025-09-13 09:54:25.562 [Thd =150]  Info Default  开始扫描条带； [44/120]
2025-09-13 09:54:25.565 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:25.567 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:18.71085, CaptureEndX:-12.39932, CaptureEndY:18.71085, VectorBeginX:14.66324, VectorBeginY:18.71085, VectorEndX:-16.35588, VectorEndY:18.71085, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:25.567 [Thd =46]  Info Default ***row:44, vectorBeginX:14.663, vectorBeginY:18.711, captureBeginX:11.098, captureBeginY:18.711, captureEndX:-12.399, captureEndY:18.711, vectorEndX:-16.356, vectorEndY:18.711
2025-09-13 09:54:25.567 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:25.569 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975584645624,EndPoint:12.399315908148
2025-09-13 09:54:26.328 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:26
2025-09-13 09:54:26.345 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:26
2025-09-13 09:54:26.769 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:44
2025-09-13 09:54:26.769 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:26.769 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:26.770 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:44
2025-09-13 09:54:26.770 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:26.770 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:A_SourceLightType
2025-09-13 09:54:26.770 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:B_SourceLightType
2025-09-13 09:54:26.770 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,A_SourceLightType
2025-09-13 09:54:26.770 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,B_SourceLightType
2025-09-13 09:54:26.818 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:26.820 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_44_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:26.869 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:26.870 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_44_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:27.038 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;44/120,
2025-09-13 09:54:27.047 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:27.108 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:27.448 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 45
2025-09-13 09:54:27.448 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 45
2025-09-13 09:54:27.448 [Thd =65]  Info Default  开始扫描条带； [45/120]
2025-09-13 09:54:27.451 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:27.453 [Thd =46]  Info Default ***row:45, vectorBeginX:-16.356, vectorBeginY:18.283, captureBeginX:-12.736, captureBeginY:18.283, captureEndX:10.761, captureEndY:18.283, vectorEndX:14.663, vectorEndY:18.283
2025-09-13 09:54:27.453 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:27.454 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361270343798,EndPoint:-10.7607473383306
2025-09-13 09:54:28.657 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:45
2025-09-13 09:54:28.657 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:28.657 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:28.658 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:45
2025-09-13 09:54:28.658 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:28.658 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:A_SourceLightType
2025-09-13 09:54:28.658 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,A_SourceLightType
2025-09-13 09:54:28.658 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,B_SourceLightType
2025-09-13 09:54:28.658 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:B_SourceLightType
2025-09-13 09:54:28.707 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:28.708 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_45_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:28.755 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:28.757 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_45_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:28.919 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;45/120,
2025-09-13 09:54:28.928 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:29.006 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:29.346 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 46
2025-09-13 09:54:29.346 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 46
2025-09-13 09:54:29.346 [Thd =213]  Info Default  开始扫描条带； [46/120]
2025-09-13 09:54:29.348 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:29.350 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:17.85575, CaptureEndX:-12.39931, CaptureEndY:17.85575, VectorBeginX:14.66324, VectorBeginY:17.85575, VectorEndX:-16.35588, VectorEndY:17.85575, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:29.350 [Thd =46]  Info Default ***row:46, vectorBeginX:14.663, vectorBeginY:17.856, captureBeginX:11.098, captureBeginY:17.856, captureEndX:-12.399, captureEndY:17.856, vectorEndX:-16.356, vectorEndY:17.856
2025-09-13 09:54:29.351 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:29.352 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975613943422,EndPoint:12.3993129783682
2025-09-13 09:54:29.528 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:29
2025-09-13 09:54:29.552 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:29
2025-09-13 09:54:30.553 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:46
2025-09-13 09:54:30.553 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:30.553 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:30.553 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:46
2025-09-13 09:54:30.553 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:30.553 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:A_SourceLightType
2025-09-13 09:54:30.553 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:B_SourceLightType
2025-09-13 09:54:30.553 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,A_SourceLightType
2025-09-13 09:54:30.553 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,B_SourceLightType
2025-09-13 09:54:30.601 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:30.602 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_46_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:30.651 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:30.653 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_46_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:30.819 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;46/120,
2025-09-13 09:54:30.829 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:30.977 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:31.327 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 47
2025-09-13 09:54:31.327 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 47
2025-09-13 09:54:31.327 [Thd =47]  Info Default  开始扫描条带； [47/120]
2025-09-13 09:54:31.329 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:31.331 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:31
2025-09-13 09:54:31.331 [Thd =46]  Info Default ***row:47, vectorBeginX:-16.356, vectorBeginY:17.428, captureBeginX:-12.736, captureBeginY:17.428, captureEndX:10.761, captureEndY:17.428, vectorEndX:14.663, vectorEndY:17.428
2025-09-13 09:54:31.331 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:31.332 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361276447313,EndPoint:-10.7607467279791
2025-09-13 09:54:31.382 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:31
2025-09-13 09:54:32.535 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:47
2025-09-13 09:54:32.535 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:32.535 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:32.536 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:47
2025-09-13 09:54:32.536 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:32.536 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:A_SourceLightType
2025-09-13 09:54:32.536 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,A_SourceLightType
2025-09-13 09:54:32.536 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,B_SourceLightType
2025-09-13 09:54:32.536 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:B_SourceLightType
2025-09-13 09:54:32.582 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:32.584 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_47_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:32.633 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:32.634 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_47_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:32.798 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;47/120,
2025-09-13 09:54:32.807 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:32.928 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:33.269 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:33
2025-09-13 09:54:33.277 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 48
2025-09-13 09:54:33.277 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 48
2025-09-13 09:54:33.277 [Thd =77]  Info Default  开始扫描条带； [48/120]
2025-09-13 09:54:33.279 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:33.282 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:17.00065, CaptureEndX:-12.39932, CaptureEndY:17.00065, VectorBeginX:14.66324, VectorBeginY:17.00065, VectorEndX:-16.35588, VectorEndY:17.00065, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:33.282 [Thd =46]  Info Default ***row:48, vectorBeginX:14.663, vectorBeginY:17.001, captureBeginX:11.098, captureBeginY:17.001, captureEndX:-12.399, captureEndY:17.001, vectorEndX:-16.356, vectorEndY:17.001
2025-09-13 09:54:33.282 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:33.283 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975590139635,EndPoint:12.3993153587469
2025-09-13 09:54:33.292 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:33
2025-09-13 09:54:34.491 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:48
2025-09-13 09:54:34.492 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:34.492 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:34.492 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:48
2025-09-13 09:54:34.492 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:34.492 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:B_SourceLightType
2025-09-13 09:54:34.492 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,B_SourceLightType
2025-09-13 09:54:34.492 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,A_SourceLightType
2025-09-13 09:54:34.492 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:A_SourceLightType
2025-09-13 09:54:34.538 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:34.540 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_48_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:34.588 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:34.590 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_48_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:34.751 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;48/120,
2025-09-13 09:54:34.760 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:34.802 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:35.153 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 49
2025-09-13 09:54:35.153 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 49
2025-09-13 09:54:35.153 [Thd =36]  Info Default  开始扫描条带； [49/120]
2025-09-13 09:54:35.155 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:35.158 [Thd =46]  Info Default ***row:49, vectorBeginX:-16.356, vectorBeginY:16.573, captureBeginX:-12.736, captureBeginY:16.573, captureEndX:10.761, captureEndY:16.573, vectorEndX:14.663, vectorEndY:16.573
2025-09-13 09:54:35.158 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:35.159 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361323444384,EndPoint:-10.760742028272
2025-09-13 09:54:35.381 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:35
2025-09-13 09:54:35.421 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:35
2025-09-13 09:54:36.362 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:49
2025-09-13 09:54:36.362 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:36.362 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:36.363 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:49
2025-09-13 09:54:36.363 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:36.363 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:A_SourceLightType
2025-09-13 09:54:36.363 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:B_SourceLightType
2025-09-13 09:54:36.363 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,A_SourceLightType
2025-09-13 09:54:36.363 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,B_SourceLightType
2025-09-13 09:54:36.416 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:36.418 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_49_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:36.469 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:36.472 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_49_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:36.629 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;49/120,
2025-09-13 09:54:36.638 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:36.824 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:37.163 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 50
2025-09-13 09:54:37.163 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 50
2025-09-13 09:54:37.163 [Thd =57]  Info Default  开始扫描条带； [50/120]
2025-09-13 09:54:37.165 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:37.168 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:16.14556, CaptureEndX:-12.39932, CaptureEndY:16.14556, VectorBeginX:14.66323, VectorBeginY:16.14556, VectorEndX:-16.35589, VectorEndY:16.14556, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:37.168 [Thd =46]  Info Default ***row:50, vectorBeginX:14.663, vectorBeginY:16.146, captureBeginX:11.098, captureBeginY:16.146, captureEndX:-12.399, captureEndY:16.146, vectorEndX:-16.356, vectorEndY:16.146
2025-09-13 09:54:37.168 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:37.169 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975562062876,EndPoint:12.3993181664228
2025-09-13 09:54:37.712 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:37
2025-09-13 09:54:37.764 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:37
2025-09-13 09:54:37.953 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:37
2025-09-13 09:54:38.000 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:38
2025-09-13 09:54:38.370 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:50
2025-09-13 09:54:38.370 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:38.370 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:38.371 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:50
2025-09-13 09:54:38.371 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:38.371 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:A_SourceLightType
2025-09-13 09:54:38.371 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,A_SourceLightType
2025-09-13 09:54:38.371 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,B_SourceLightType
2025-09-13 09:54:38.371 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:B_SourceLightType
2025-09-13 09:54:38.418 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:38.421 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_50_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:38.470 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:38.472 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_50_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:38.641 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;50/120,
2025-09-13 09:54:38.650 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:38.701 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:39.051 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 51
2025-09-13 09:54:39.051 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 51
2025-09-13 09:54:39.051 [Thd =65]  Info Default  开始扫描条带； [51/120]
2025-09-13 09:54:39.053 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:39.056 [Thd =46]  Info Default ***row:51, vectorBeginX:-16.356, vectorBeginY:15.718, captureBeginX:-12.736, captureBeginY:15.718, captureEndX:10.761, captureEndY:15.718, vectorEndX:14.663, vectorEndY:15.718
2025-09-13 09:54:39.056 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:39.057 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736125935747,EndPoint:-10.7607484369634
2025-09-13 09:54:40.263 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:51
2025-09-13 09:54:40.264 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:40.264 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:40.267 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:51
2025-09-13 09:54:40.267 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:40.267 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:B_SourceLightType
2025-09-13 09:54:40.267 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,B_SourceLightType
2025-09-13 09:54:40.267 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,A_SourceLightType
2025-09-13 09:54:40.267 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:A_SourceLightType
2025-09-13 09:54:40.317 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:40.319 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_51_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:40.363 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:40.365 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_51_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:40.526 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;51/120,
2025-09-13 09:54:40.535 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:40.677 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:41.017 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 52
2025-09-13 09:54:41.017 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 52
2025-09-13 09:54:41.017 [Thd =213]  Info Default  开始扫描条带； [52/120]
2025-09-13 09:54:41.019 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:41.021 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:15.29046, CaptureEndX:-12.39931, CaptureEndY:15.29046, VectorBeginX:14.66324, VectorBeginY:15.29046, VectorEndX:-16.35588, VectorEndY:15.29046, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:41.021 [Thd =46]  Info Default ***row:52, vectorBeginX:14.663, vectorBeginY:15.290, captureBeginX:11.098, captureBeginY:15.290, captureEndX:-12.399, captureEndY:15.290, vectorEndX:-16.356, vectorEndY:15.290
2025-09-13 09:54:41.021 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:41.023 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975635305865,EndPoint:12.399310842124
2025-09-13 09:54:42.222 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:52
2025-09-13 09:54:42.222 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:42.222 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:42.224 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:52
2025-09-13 09:54:42.224 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:42.224 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:A_SourceLightType
2025-09-13 09:54:42.224 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,A_SourceLightType
2025-09-13 09:54:42.224 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,B_SourceLightType
2025-09-13 09:54:42.224 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:B_SourceLightType
2025-09-13 09:54:42.271 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:42.273 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_52_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:42.298 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:42
2025-09-13 09:54:42.326 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:42.328 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_52_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:42.333 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:42
2025-09-13 09:54:42.491 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;52/120,
2025-09-13 09:54:42.500 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:42.657 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:43.007 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 53
2025-09-13 09:54:43.007 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 53
2025-09-13 09:54:43.007 [Thd =36]  Info Default  开始扫描条带； [53/120]
2025-09-13 09:54:43.009 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:43.012 [Thd =46]  Info Default ***row:53, vectorBeginX:-16.356, vectorBeginY:14.863, captureBeginX:-12.736, captureBeginY:14.863, captureEndX:10.761, captureEndY:14.863, vectorEndX:14.663, vectorEndY:14.863
2025-09-13 09:54:43.012 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:43.013 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361253864306,EndPoint:-10.7607489862798
2025-09-13 09:54:43.074 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:43
2025-09-13 09:54:43.098 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:43
2025-09-13 09:54:43.878 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:43
2025-09-13 09:54:43.950 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:43
2025-09-13 09:54:44.215 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:53
2025-09-13 09:54:44.215 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:44.215 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:44.216 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:53
2025-09-13 09:54:44.216 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:44.216 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:A_SourceLightType
2025-09-13 09:54:44.216 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:B_SourceLightType
2025-09-13 09:54:44.216 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,A_SourceLightType
2025-09-13 09:54:44.216 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,B_SourceLightType
2025-09-13 09:54:44.262 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:44.264 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_53_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:44.313 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:44.315 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_53_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:44.481 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;53/120,
2025-09-13 09:54:44.489 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:44.532 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:44.882 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 54
2025-09-13 09:54:44.882 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 54
2025-09-13 09:54:44.882 [Thd =151]  Info Default  开始扫描条带； [54/120]
2025-09-13 09:54:44.884 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:44.886 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:14.43537, CaptureEndX:-12.39931, CaptureEndY:14.43537, VectorBeginX:14.66324, VectorBeginY:14.43537, VectorEndX:-16.35588, VectorEndY:14.43537, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:44.886 [Thd =46]  Info Default ***row:54, vectorBeginX:14.663, vectorBeginY:14.435, captureBeginX:11.098, captureBeginY:14.435, captureEndX:-12.399, captureEndY:14.435, vectorEndX:-16.356, vectorEndY:14.435
2025-09-13 09:54:44.886 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:44.888 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975607229761,EndPoint:12.3993136497343
2025-09-13 09:54:46.087 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:54
2025-09-13 09:54:46.088 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:46.088 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:46.088 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:54
2025-09-13 09:54:46.088 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:46.088 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:B_SourceLightType
2025-09-13 09:54:46.088 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:A_SourceLightType
2025-09-13 09:54:46.088 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,B_SourceLightType
2025-09-13 09:54:46.088 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,A_SourceLightType
2025-09-13 09:54:46.136 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:46.138 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_54_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:46.190 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:46.192 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_54_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:46.352 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;54/120,
2025-09-13 09:54:46.361 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:46.404 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:46.754 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 55
2025-09-13 09:54:46.754 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 55
2025-09-13 09:54:46.754 [Thd =180]  Info Default  开始扫描条带； [55/120]
2025-09-13 09:54:46.757 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:46.759 [Thd =46]  Info Default ***row:55, vectorBeginX:-16.356, vectorBeginY:14.008, captureBeginX:-12.736, captureBeginY:14.008, captureEndX:10.761, captureEndY:14.008, vectorEndX:14.663, vectorEndY:14.008
2025-09-13 09:54:46.759 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:46.760 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361317340868,EndPoint:-10.7607426386236
2025-09-13 09:54:47.136 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:47
2025-09-13 09:54:47.163 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:47
2025-09-13 09:54:47.962 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:55
2025-09-13 09:54:47.962 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:47.963 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:47.963 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:55
2025-09-13 09:54:47.963 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:47.963 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:A_SourceLightType
2025-09-13 09:54:47.963 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:B_SourceLightType
2025-09-13 09:54:47.963 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,A_SourceLightType
2025-09-13 09:54:47.963 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,B_SourceLightType
2025-09-13 09:54:48.013 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:48.014 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_55_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:48.065 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:48.066 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_55_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:48.234 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;55/120,
2025-09-13 09:54:48.243 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:48.316 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:48.666 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 56
2025-09-13 09:54:48.666 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 56
2025-09-13 09:54:48.666 [Thd =36]  Info Default  开始扫描条带； [56/120]
2025-09-13 09:54:48.669 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:48.670 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:48
2025-09-13 09:54:48.672 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:13.58027, CaptureEndX:-12.39932, CaptureEndY:13.58027, VectorBeginX:14.66323, VectorBeginY:13.58027, VectorEndX:-16.35589, VectorEndY:13.58027, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:48.672 [Thd =46]  Info Default ***row:56, vectorBeginX:14.663, vectorBeginY:13.580, captureBeginX:11.098, captureBeginY:13.580, captureEndX:-12.399, captureEndY:13.580, vectorEndX:-16.356, vectorEndY:13.580
2025-09-13 09:54:48.672 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:48.673 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097553398678,EndPoint:12.3993209740324
2025-09-13 09:54:48.687 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:48
2025-09-13 09:54:49.189 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:49
2025-09-13 09:54:49.214 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:49
2025-09-13 09:54:49.872 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:56
2025-09-13 09:54:49.872 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:49.872 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:49.874 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:56
2025-09-13 09:54:49.874 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:49.874 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:A_SourceLightType
2025-09-13 09:54:49.874 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,A_SourceLightType
2025-09-13 09:54:49.874 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,B_SourceLightType
2025-09-13 09:54:49.874 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:B_SourceLightType
2025-09-13 09:54:49.924 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:49.926 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_56_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:49.967 [Thd =219]  Info Default m_bIdel
2025-09-13 09:54:49.985 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:49.987 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_56_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:50.147 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;56/120,
2025-09-13 09:54:50.156 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:50.208 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:50.557 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 57
2025-09-13 09:54:50.557 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 57
2025-09-13 09:54:50.557 [Thd =36]  Info Default  开始扫描条带； [57/120]
2025-09-13 09:54:50.559 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:50.562 [Thd =46]  Info Default ***row:57, vectorBeginX:-16.356, vectorBeginY:13.153, captureBeginX:-12.736, captureBeginY:13.153, captureEndX:10.761, captureEndY:13.153, vectorEndX:14.663, vectorEndY:13.153
2025-09-13 09:54:50.562 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:50.563 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361363727587,EndPoint:-10.7607379999517
2025-09-13 09:54:50.967 [Thd =49]  Error Default PLCKeyence:ReadDeviceCmd failed.
2025-09-13 09:54:51.764 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:57
2025-09-13 09:54:51.765 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:51.765 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:51.765 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:57
2025-09-13 09:54:51.765 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:51.765 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:A_SourceLightType
2025-09-13 09:54:51.765 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:B_SourceLightType
2025-09-13 09:54:51.765 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,A_SourceLightType
2025-09-13 09:54:51.765 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,B_SourceLightType
2025-09-13 09:54:51.815 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:51.816 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_57_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:51.865 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:51.867 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_57_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:52.038 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;57/120,
2025-09-13 09:54:52.047 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:52.095 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:52.444 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 58
2025-09-13 09:54:52.444 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 58
2025-09-13 09:54:52.444 [Thd =136]  Info Default  开始扫描条带； [58/120]
2025-09-13 09:54:52.449 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:52.451 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:12.72518, CaptureEndX:-12.39932, CaptureEndY:12.72518, VectorBeginX:14.66323, VectorBeginY:12.72518, VectorEndX:-16.35589, VectorEndY:12.72518, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:52.451 [Thd =46]  Info Default ***row:58, vectorBeginX:14.663, vectorBeginY:12.725, captureBeginX:11.098, captureBeginY:12.725, captureEndX:-12.399, captureEndY:12.725, vectorEndX:-16.356, vectorEndY:12.725
2025-09-13 09:54:52.451 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:52.452 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975507130732,EndPoint:12.3993236596372
2025-09-13 09:54:52.987 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:52
2025-09-13 09:54:53.082 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:53
2025-09-13 09:54:53.662 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:58
2025-09-13 09:54:53.662 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:53.662 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:53.664 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:58
2025-09-13 09:54:53.664 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:53.664 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:A_SourceLightType
2025-09-13 09:54:53.664 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,A_SourceLightType
2025-09-13 09:54:53.665 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,B_SourceLightType
2025-09-13 09:54:53.665 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:B_SourceLightType
2025-09-13 09:54:53.726 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:53.728 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_58_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:53.776 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:53.779 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_58_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:53.924 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;58/120,
2025-09-13 09:54:53.933 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:53.979 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:54.330 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 59
2025-09-13 09:54:54.330 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 59
2025-09-13 09:54:54.330 [Thd =65]  Info Default  开始扫描条带； [59/120]
2025-09-13 09:54:54.333 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:54.335 [Thd =46]  Info Default ***row:59, vectorBeginX:-16.356, vectorBeginY:12.298, captureBeginX:-12.736, captureBeginY:12.298, captureEndX:10.761, captureEndY:12.298, vectorEndX:14.663, vectorEndY:12.298
2025-09-13 09:54:54.336 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:54.336 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361311237353,EndPoint:-10.7607432489751
2025-09-13 09:54:54.674 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:54
2025-09-13 09:54:54.700 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:54
2025-09-13 09:54:55.537 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:59
2025-09-13 09:54:55.537 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:55.537 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:55.540 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:59
2025-09-13 09:54:55.540 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:55.540 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:A_SourceLightType
2025-09-13 09:54:55.540 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:B_SourceLightType
2025-09-13 09:54:55.540 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,A_SourceLightType
2025-09-13 09:54:55.540 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,B_SourceLightType
2025-09-13 09:54:55.588 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:55.590 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_59_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:55.641 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:55.643 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_59_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:55.805 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;59/120,
2025-09-13 09:54:55.814 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:55.855 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:56.206 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 60
2025-09-13 09:54:56.206 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 60
2025-09-13 09:54:56.206 [Thd =213]  Info Default  开始扫描条带； [60/120]
2025-09-13 09:54:56.209 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:54:56.211 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:11.87008, CaptureEndX:-12.39932, CaptureEndY:11.87008, VectorBeginX:14.66324, VectorBeginY:11.87008, VectorEndX:-16.35588, VectorEndY:11.87008, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:54:56.211 [Thd =46]  Info Default ***row:60, vectorBeginX:14.663, vectorBeginY:11.870, captureBeginX:11.098, captureBeginY:11.870, captureEndX:-12.399, captureEndY:11.870, vectorEndX:-16.356, vectorEndY:11.870
2025-09-13 09:54:56.211 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:56.212 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975580983927,EndPoint:12.3993162743177
2025-09-13 09:54:56.508 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:56
2025-09-13 09:54:56.565 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:56
2025-09-13 09:54:57.413 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:60
2025-09-13 09:54:57.414 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:57.414 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:57.414 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:60
2025-09-13 09:54:57.414 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:57.414 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:A_SourceLightType
2025-09-13 09:54:57.414 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:B_SourceLightType
2025-09-13 09:54:57.414 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,A_SourceLightType
2025-09-13 09:54:57.414 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,B_SourceLightType
2025-09-13 09:54:57.463 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:57.465 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_60_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:57.514 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:57.516 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_60_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:57.680 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;60/120,
2025-09-13 09:54:57.689 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:57.968 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:54:58.317 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 61
2025-09-13 09:54:58.317 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 61
2025-09-13 09:54:58.317 [Thd =222]  Info Default  开始扫描条带； [61/120]
2025-09-13 09:54:58.320 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:54:58.322 [Thd =46]  Info Default ***row:61, vectorBeginX:-16.356, vectorBeginY:11.443, captureBeginX:-12.736, captureBeginY:11.443, captureEndX:10.761, captureEndY:11.443, vectorEndX:14.663, vectorEndY:11.443
2025-09-13 09:54:58.323 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:54:58.324 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361285602587,EndPoint:-10.7607458124517
2025-09-13 09:54:58.629 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:54:58
2025-09-13 09:54:58.757 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:54:58
2025-09-13 09:54:59.526 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:61
2025-09-13 09:54:59.526 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:59.526 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:54:59.531 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:61
2025-09-13 09:54:59.531 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:54:59.531 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:B_SourceLightType
2025-09-13 09:54:59.531 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:A_SourceLightType
2025-09-13 09:54:59.531 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,B_SourceLightType
2025-09-13 09:54:59.532 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,A_SourceLightType
2025-09-13 09:54:59.585 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:54:59.587 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_61_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:59.636 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:54:59.638 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_61_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:54:59.797 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;61/120,
2025-09-13 09:54:59.806 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:54:59.983 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:00.334 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 62
2025-09-13 09:55:00.334 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 62
2025-09-13 09:55:00.334 [Thd =222]  Info Default  开始扫描条带； [62/120]
2025-09-13 09:55:00.337 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:00.339 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:11.01498, CaptureEndX:-12.39932, CaptureEndY:11.01498, VectorBeginX:14.66323, VectorBeginY:11.01498, VectorEndX:-16.35589, VectorEndY:11.01498, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:00.339 [Thd =46]  Info Default ***row:62, vectorBeginX:14.663, vectorBeginY:11.015, captureBeginX:11.098, captureBeginY:11.015, captureEndX:-12.399, captureEndY:11.015, vectorEndX:-16.356, vectorEndY:11.015
2025-09-13 09:55:00.339 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:00.340 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975563894404,EndPoint:12.39931798327
2025-09-13 09:55:00.707 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:00
2025-09-13 09:55:00.724 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:00
2025-09-13 09:55:01.540 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:62
2025-09-13 09:55:01.540 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:01.540 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:01.541 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:62
2025-09-13 09:55:01.541 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:01.541 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:B_SourceLightType
2025-09-13 09:55:01.541 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:A_SourceLightType
2025-09-13 09:55:01.541 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,B_SourceLightType
2025-09-13 09:55:01.541 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,A_SourceLightType
2025-09-13 09:55:01.592 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:01.594 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_62_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:01.643 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:01.644 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_62_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:01.729 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:01
2025-09-13 09:55:01.748 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:01
2025-09-13 09:55:01.807 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;62/120,
2025-09-13 09:55:01.819 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:01.877 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:02.227 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 63
2025-09-13 09:55:02.227 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 63
2025-09-13 09:55:02.227 [Thd =131]  Info Default  开始扫描条带； [63/120]
2025-09-13 09:55:02.229 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:02.231 [Thd =46]  Info Default ***row:63, vectorBeginX:-16.356, vectorBeginY:10.587, captureBeginX:-12.736, captureBeginY:10.587, captureEndX:10.761, captureEndY:10.587, vectorEndX:14.663, vectorEndY:10.587
2025-09-13 09:55:02.231 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:02.233 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361261188524,EndPoint:-10.760748253858
2025-09-13 09:55:02.250 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:02
2025-09-13 09:55:02.266 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:02
2025-09-13 09:55:03.436 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:63
2025-09-13 09:55:03.436 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:03.437 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:03.438 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:63
2025-09-13 09:55:03.438 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:03.438 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:B_SourceLightType
2025-09-13 09:55:03.438 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,B_SourceLightType
2025-09-13 09:55:03.438 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,A_SourceLightType
2025-09-13 09:55:03.438 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:A_SourceLightType
2025-09-13 09:55:03.489 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:03.491 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_63_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:03.545 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:03.547 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_63_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:03.698 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;63/120,
2025-09-13 09:55:03.707 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:03.786 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:03.823 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:03
2025-09-13 09:55:03.860 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:03
2025-09-13 09:55:04.136 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 64
2025-09-13 09:55:04.136 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 64
2025-09-13 09:55:04.136 [Thd =66]  Info Default  开始扫描条带； [64/120]
2025-09-13 09:55:04.138 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:04.140 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:10.15989, CaptureEndX:-12.39932, CaptureEndY:10.15989, VectorBeginX:14.66324, VectorBeginY:10.15989, VectorEndX:-16.35588, VectorEndY:10.15989, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:04.140 [Thd =46]  Info Default ***row:64, vectorBeginX:14.663, vectorBeginY:10.160, captureBeginX:11.098, captureBeginY:10.160, captureEndX:-12.399, captureEndY:10.160, vectorEndX:-16.356, vectorEndY:10.160
2025-09-13 09:55:04.140 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:04.141 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975581594904,EndPoint:12.39931621322
2025-09-13 09:55:05.343 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:64
2025-09-13 09:55:05.343 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:05.343 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:05.344 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:64
2025-09-13 09:55:05.344 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:05.344 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:A_SourceLightType
2025-09-13 09:55:05.344 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:B_SourceLightType
2025-09-13 09:55:05.344 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,A_SourceLightType
2025-09-13 09:55:05.344 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,B_SourceLightType
2025-09-13 09:55:05.395 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:05.397 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_64_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:05.452 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:05.454 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_64_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:05.611 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;64/120,
2025-09-13 09:55:05.620 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:05.665 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:06.015 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 65
2025-09-13 09:55:06.015 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 65
2025-09-13 09:55:06.015 [Thd =196]  Info Default  开始扫描条带； [65/120]
2025-09-13 09:55:06.018 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:06.020 [Thd =46]  Info Default ***row:65, vectorBeginX:-16.356, vectorBeginY:9.732, captureBeginX:-12.736, captureBeginY:9.732, captureEndX:10.761, captureEndY:9.732, vectorEndX:14.663, vectorEndY:9.732
2025-09-13 09:55:06.020 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:06.022 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361265460985,EndPoint:-10.7607478266119
2025-09-13 09:55:06.365 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:06
2025-09-13 09:55:06.513 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:06
2025-09-13 09:55:07.223 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:65
2025-09-13 09:55:07.224 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:07.224 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:07.224 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:65
2025-09-13 09:55:07.224 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:07.224 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:A_SourceLightType
2025-09-13 09:55:07.224 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:B_SourceLightType
2025-09-13 09:55:07.224 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,A_SourceLightType
2025-09-13 09:55:07.225 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,B_SourceLightType
2025-09-13 09:55:07.275 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:07.277 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_65_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:07.329 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:07.331 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_65_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:07.495 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;65/120,
2025-09-13 09:55:07.504 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:07.555 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:07.903 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 66
2025-09-13 09:55:07.903 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 66
2025-09-13 09:55:07.903 [Thd =151]  Info Default  开始扫描条带； [66/120]
2025-09-13 09:55:07.905 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:07.907 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:9.30479, CaptureEndX:-12.39931, CaptureEndY:9.30479, VectorBeginX:14.66324, VectorBeginY:9.30479, VectorEndX:-16.35588, VectorEndY:9.30479, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:07.907 [Thd =46]  Info Default ***row:66, vectorBeginX:14.663, vectorBeginY:9.305, captureBeginX:11.098, captureBeginY:9.305, captureEndX:-12.399, captureEndY:9.305, vectorEndX:-16.356, vectorEndY:9.305
2025-09-13 09:55:07.907 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:07.909 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975601126101,EndPoint:12.3993142601003
2025-09-13 09:55:09.108 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:66
2025-09-13 09:55:09.108 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:09.108 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:09.109 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:66
2025-09-13 09:55:09.110 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:09.110 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:B_SourceLightType
2025-09-13 09:55:09.110 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:A_SourceLightType
2025-09-13 09:55:09.110 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,B_SourceLightType
2025-09-13 09:55:09.110 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,A_SourceLightType
2025-09-13 09:55:09.157 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:09.159 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_66_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:09.213 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:09.214 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_66_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:09.375 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;66/120,
2025-09-13 09:55:09.384 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:09.446 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:09.796 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 67
2025-09-13 09:55:09.796 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 67
2025-09-13 09:55:09.796 [Thd =112]  Info Default  开始扫描条带； [67/120]
2025-09-13 09:55:09.798 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:09.801 [Thd =46]  Info Default ***row:67, vectorBeginX:-16.356, vectorBeginY:8.877, captureBeginX:-12.736, captureBeginY:8.877, captureEndX:10.761, captureEndY:8.877, vectorEndX:14.663, vectorEndY:8.877
2025-09-13 09:55:09.801 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:09.802 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361270343798,EndPoint:-10.7607473383306
2025-09-13 09:55:10.168 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:10
2025-09-13 09:55:10.200 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:10
2025-09-13 09:55:11.004 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:67
2025-09-13 09:55:11.004 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:11.004 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:11.006 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:67
2025-09-13 09:55:11.006 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:11.006 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:A_SourceLightType
2025-09-13 09:55:11.006 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,A_SourceLightType
2025-09-13 09:55:11.006 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,B_SourceLightType
2025-09-13 09:55:11.006 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:B_SourceLightType
2025-09-13 09:55:11.058 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:11.059 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_67_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:11.112 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:11.114 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_67_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:11.274 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;67/120,
2025-09-13 09:55:11.283 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:11.542 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:11.892 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 68
2025-09-13 09:55:11.892 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 68
2025-09-13 09:55:11.892 [Thd =221]  Info Default  开始扫描条带； [68/120]
2025-09-13 09:55:11.895 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:11.897 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:8.44970, CaptureEndX:-12.39932, CaptureEndY:8.44970, VectorBeginX:14.66323, VectorBeginY:8.44970, VectorEndX:-16.35589, VectorEndY:8.44970, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:11.897 [Thd =46]  Info Default ***row:68, vectorBeginX:14.663, vectorBeginY:8.450, captureBeginX:11.098, captureBeginY:8.450, captureEndX:-12.399, captureEndY:8.450, vectorEndX:-16.356, vectorEndY:8.450
2025-09-13 09:55:11.898 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:11.901 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975567556704,EndPoint:12.39931761704
2025-09-13 09:55:12.110 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:12
2025-09-13 09:55:12.182 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:12
2025-09-13 09:55:12.523 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:12
2025-09-13 09:55:12.563 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:12
2025-09-13 09:55:13.101 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:68
2025-09-13 09:55:13.102 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:13.102 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:13.102 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:68
2025-09-13 09:55:13.103 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:13.103 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:A_SourceLightType
2025-09-13 09:55:13.103 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:B_SourceLightType
2025-09-13 09:55:13.103 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,A_SourceLightType
2025-09-13 09:55:13.103 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,B_SourceLightType
2025-09-13 09:55:13.148 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:13.151 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_68_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:13.205 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:13.207 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_68_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:13.369 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;68/120,
2025-09-13 09:55:13.378 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:13.418 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:13.771 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 69
2025-09-13 09:55:13.771 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 69
2025-09-13 09:55:13.771 [Thd =57]  Info Default  开始扫描条带； [69/120]
2025-09-13 09:55:13.773 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:13.776 [Thd =46]  Info Default ***row:69, vectorBeginX:-16.356, vectorBeginY:8.022, captureBeginX:-12.736, captureBeginY:8.022, captureEndX:10.761, captureEndY:8.022, vectorEndX:14.663, vectorEndY:8.022
2025-09-13 09:55:13.776 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:13.777 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361277668017,EndPoint:-10.7607466059087
2025-09-13 09:55:14.978 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:69
2025-09-13 09:55:14.978 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:14.978 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:14.979 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:69
2025-09-13 09:55:14.979 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:14.979 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:B_SourceLightType
2025-09-13 09:55:14.979 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:A_SourceLightType
2025-09-13 09:55:14.979 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,B_SourceLightType
2025-09-13 09:55:14.979 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,A_SourceLightType
2025-09-13 09:55:15.025 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:15.027 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_69_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:15.078 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:15.080 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_69_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:15.243 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;69/120,
2025-09-13 09:55:15.251 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:15.294 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:15.520 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:15
2025-09-13 09:55:15.548 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:15
2025-09-13 09:55:15.643 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 70
2025-09-13 09:55:15.643 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 70
2025-09-13 09:55:15.643 [Thd =48]  Info Default  开始扫描条带； [70/120]
2025-09-13 09:55:15.645 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:15.647 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:7.59461, CaptureEndX:-12.39932, CaptureEndY:7.59461, VectorBeginX:14.66323, VectorBeginY:7.59461, VectorEndX:-16.35588, VectorEndY:7.59461, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:15.647 [Thd =46]  Info Default ***row:70, vectorBeginX:14.663, vectorBeginY:7.595, captureBeginX:11.098, captureBeginY:7.595, captureEndX:-12.399, captureEndY:7.595, vectorEndX:-16.356, vectorEndY:7.595
2025-09-13 09:55:15.647 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:15.649 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975577322237,EndPoint:12.3993166404867
2025-09-13 09:55:16.848 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:70
2025-09-13 09:55:16.848 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:16.848 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:16.849 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:70
2025-09-13 09:55:16.849 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:16.849 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:A_SourceLightType
2025-09-13 09:55:16.849 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:B_SourceLightType
2025-09-13 09:55:16.849 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,A_SourceLightType
2025-09-13 09:55:16.849 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,B_SourceLightType
2025-09-13 09:55:16.895 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:16.897 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_70_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:16.953 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:16.955 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_70_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:17.056 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:17
2025-09-13 09:55:17.073 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:17
2025-09-13 09:55:17.121 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;70/120,
2025-09-13 09:55:17.130 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:17.182 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:17.531 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 71
2025-09-13 09:55:17.531 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 71
2025-09-13 09:55:17.531 [Thd =48]  Info Default  开始扫描条带； [71/120]
2025-09-13 09:55:17.533 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:17.536 [Thd =46]  Info Default ***row:71, vectorBeginX:-16.356, vectorBeginY:7.167, captureBeginX:-12.736, captureBeginY:7.167, captureEndX:10.761, captureEndY:7.167, vectorEndX:14.663, vectorEndY:7.167
2025-09-13 09:55:17.536 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:17.537 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361279499071,EndPoint:-10.7607464228033
2025-09-13 09:55:18.077 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:18
2025-09-13 09:55:18.103 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:18
2025-09-13 09:55:18.738 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:71
2025-09-13 09:55:18.739 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:18.739 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:18.739 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:71
2025-09-13 09:55:18.740 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:18.740 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:B_SourceLightType
2025-09-13 09:55:18.740 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,B_SourceLightType
2025-09-13 09:55:18.740 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,A_SourceLightType
2025-09-13 09:55:18.740 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:A_SourceLightType
2025-09-13 09:55:18.787 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:18.789 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_71_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:18.837 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:18.838 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_71_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:19.005 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;71/120,
2025-09-13 09:55:19.014 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:19.140 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:19.491 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 72
2025-09-13 09:55:19.491 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 72
2025-09-13 09:55:19.491 [Thd =47]  Info Default  开始扫描条带； [72/120]
2025-09-13 09:55:19.494 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:19.496 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:6.73951, CaptureEndX:-12.39932, CaptureEndY:6.73951, VectorBeginX:14.66323, VectorBeginY:6.73951, VectorEndX:-16.35588, VectorEndY:6.73951, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:19.496 [Thd =46]  Info Default ***row:72, vectorBeginX:14.663, vectorBeginY:6.740, captureBeginX:11.098, captureBeginY:6.740, captureEndX:-12.399, captureEndY:6.740, vectorEndX:-16.356, vectorEndY:6.740
2025-09-13 09:55:19.496 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:19.497 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975576101511,EndPoint:12.3993167625593
2025-09-13 09:55:20.696 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:72
2025-09-13 09:55:20.697 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:20.697 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:20.697 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:72
2025-09-13 09:55:20.698 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:20.698 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:B_SourceLightType
2025-09-13 09:55:20.698 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:A_SourceLightType
2025-09-13 09:55:20.698 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,B_SourceLightType
2025-09-13 09:55:20.698 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,A_SourceLightType
2025-09-13 09:55:20.745 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:20.747 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_72_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:20.797 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:20.799 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_72_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:20.965 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;72/120,
2025-09-13 09:55:20.975 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:21.018 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:21.368 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 73
2025-09-13 09:55:21.368 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 73
2025-09-13 09:55:21.368 [Thd =51]  Info Default  开始扫描条带； [73/120]
2025-09-13 09:55:21.373 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:21.376 [Thd =46]  Info Default ***row:73, vectorBeginX:-16.356, vectorBeginY:6.312, captureBeginX:-12.736, captureBeginY:6.312, captureEndX:10.761, captureEndY:6.312, vectorEndX:14.663, vectorEndY:6.312
2025-09-13 09:55:21.376 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:21.377 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361288043993,EndPoint:-10.7607455683111
2025-09-13 09:55:21.614 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:21
2025-09-13 09:55:21.734 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:21
2025-09-13 09:55:21.735 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:21
2025-09-13 09:55:21.767 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:21
2025-09-13 09:55:22.579 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:73
2025-09-13 09:55:22.579 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:22.579 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:22.580 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:73
2025-09-13 09:55:22.580 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:22.580 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:B_SourceLightType
2025-09-13 09:55:22.580 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:A_SourceLightType
2025-09-13 09:55:22.580 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,B_SourceLightType
2025-09-13 09:55:22.580 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,A_SourceLightType
2025-09-13 09:55:22.629 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:22.631 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_73_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:22.685 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:22.687 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_73_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:22.850 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;73/120,
2025-09-13 09:55:22.860 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:22.900 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:23.249 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 74
2025-09-13 09:55:23.249 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 74
2025-09-13 09:55:23.249 [Thd =213]  Info Default  开始扫描条带； [74/120]
2025-09-13 09:55:23.252 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:23.254 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:5.88442, CaptureEndX:-12.39931, CaptureEndY:5.88442, VectorBeginX:14.66324, VectorBeginY:5.88442, VectorEndX:-16.35588, VectorEndY:5.88442, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:23.254 [Thd =46]  Info Default ***row:74, vectorBeginX:14.663, vectorBeginY:5.884, captureBeginX:11.098, captureBeginY:5.884, captureEndX:-12.399, captureEndY:5.884, vectorEndX:-16.356, vectorEndY:5.884
2025-09-13 09:55:23.254 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:23.256 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975597463709,EndPoint:12.3993146263395
2025-09-13 09:55:24.272 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:24
2025-09-13 09:55:24.292 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:24
2025-09-13 09:55:24.463 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:74
2025-09-13 09:55:24.464 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:24.464 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:24.466 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:74
2025-09-13 09:55:24.466 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:24.466 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:A_SourceLightType
2025-09-13 09:55:24.467 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:B_SourceLightType
2025-09-13 09:55:24.467 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,A_SourceLightType
2025-09-13 09:55:24.467 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,B_SourceLightType
2025-09-13 09:55:24.513 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:24.515 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_74_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:24.564 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:24.566 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_74_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:24.723 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;74/120,
2025-09-13 09:55:24.731 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:24.830 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:25.177 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 75
2025-09-13 09:55:25.177 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 75
2025-09-13 09:55:25.177 [Thd =51]  Info Default  开始扫描条带； [75/120]
2025-09-13 09:55:25.179 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:25.181 [Thd =46]  Info Default ***row:75, vectorBeginX:-16.356, vectorBeginY:5.457, captureBeginX:-12.736, captureBeginY:5.457, captureEndX:10.761, captureEndY:5.457, vectorEndX:14.663, vectorEndY:5.457
2025-09-13 09:55:25.181 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:25.182 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361299640673,EndPoint:-10.7607444086431
2025-09-13 09:55:25.796 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:25
2025-09-13 09:55:25.823 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:25
2025-09-13 09:55:26.395 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:75
2025-09-13 09:55:26.396 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:26.396 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:26.402 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:75
2025-09-13 09:55:26.402 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:26.402 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:B_SourceLightType
2025-09-13 09:55:26.402 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,B_SourceLightType
2025-09-13 09:55:26.402 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,A_SourceLightType
2025-09-13 09:55:26.402 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:A_SourceLightType
2025-09-13 09:55:26.445 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:26.448 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_75_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:26.498 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:26.500 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_75_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:26.654 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;75/120,
2025-09-13 09:55:26.664 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:26.782 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:27.132 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 76
2025-09-13 09:55:27.132 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 76
2025-09-13 09:55:27.132 [Thd =221]  Info Default  开始扫描条带； [76/120]
2025-09-13 09:55:27.137 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:27.139 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:5.02933, CaptureEndX:-12.39932, CaptureEndY:5.02933, VectorBeginX:14.66323, VectorBeginY:5.02933, VectorEndX:-16.35589, VectorEndY:5.02933, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:27.139 [Thd =46]  Info Default ***row:76, vectorBeginX:14.663, vectorBeginY:5.029, captureBeginX:11.098, captureBeginY:5.029, captureEndX:-12.399, captureEndY:5.029, vectorEndX:-16.356, vectorEndY:5.029
2025-09-13 09:55:27.139 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:27.140 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975558401064,EndPoint:12.399318532604
2025-09-13 09:55:28.340 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:76
2025-09-13 09:55:28.340 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:28.340 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:28.341 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:76
2025-09-13 09:55:28.341 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:28.341 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:B_SourceLightType
2025-09-13 09:55:28.341 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:A_SourceLightType
2025-09-13 09:55:28.341 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,B_SourceLightType
2025-09-13 09:55:28.341 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,A_SourceLightType
2025-09-13 09:55:28.386 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:28.389 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_76_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:28.437 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:28.439 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_76_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:28.613 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;76/120,
2025-09-13 09:55:28.622 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:28.666 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:28.830 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:28
2025-09-13 09:55:28.856 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:28
2025-09-13 09:55:29.015 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 77
2025-09-13 09:55:29.015 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 77
2025-09-13 09:55:29.015 [Thd =65]  Info Default  开始扫描条带； [77/120]
2025-09-13 09:55:29.017 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:29.019 [Thd =46]  Info Default ***row:77, vectorBeginX:-16.356, vectorBeginY:4.602, captureBeginX:-12.736, captureBeginY:4.602, captureEndX:10.761, captureEndY:4.602, vectorEndX:14.663, vectorEndY:4.602
2025-09-13 09:55:29.019 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:29.021 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361341144579,EndPoint:-10.7607402582525
2025-09-13 09:55:29.358 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:29
2025-09-13 09:55:29.375 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:29
2025-09-13 09:55:30.222 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:77
2025-09-13 09:55:30.222 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:30.222 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:30.223 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:77
2025-09-13 09:55:30.223 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:30.223 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:A_SourceLightType
2025-09-13 09:55:30.223 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:B_SourceLightType
2025-09-13 09:55:30.223 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,A_SourceLightType
2025-09-13 09:55:30.223 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,B_SourceLightType
2025-09-13 09:55:30.287 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:30.300 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_77_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:30.367 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:30.369 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_77_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:30.487 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;77/120,
2025-09-13 09:55:30.496 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:30.691 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:31.036 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 78
2025-09-13 09:55:31.036 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 78
2025-09-13 09:55:31.036 [Thd =131]  Info Default  开始扫描条带； [78/120]
2025-09-13 09:55:31.038 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:31.040 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:4.17423, CaptureEndX:-12.39932, CaptureEndY:4.17423, VectorBeginX:14.66323, VectorBeginY:4.17423, VectorEndX:-16.35589, VectorEndY:4.17423, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:31.040 [Thd =46]  Info Default ***row:78, vectorBeginX:14.663, vectorBeginY:4.174, captureBeginX:11.098, captureBeginY:4.174, captureEndX:-12.399, captureEndY:4.174, vectorEndX:-16.356, vectorEndY:4.174
2025-09-13 09:55:31.040 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:31.041 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975533986483,EndPoint:12.3993209740621
2025-09-13 09:55:31.129 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:31
2025-09-13 09:55:31.175 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:31
2025-09-13 09:55:32.240 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:78
2025-09-13 09:55:32.241 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:32.241 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:32.242 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:78
2025-09-13 09:55:32.242 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:32.242 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:B_SourceLightType
2025-09-13 09:55:32.243 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:A_SourceLightType
2025-09-13 09:55:32.243 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,B_SourceLightType
2025-09-13 09:55:32.243 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,A_SourceLightType
2025-09-13 09:55:32.288 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:32.290 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_78_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:32.347 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:32.349 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_78_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:32.507 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;78/120,
2025-09-13 09:55:32.516 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:32.652 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:32.993 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 79
2025-09-13 09:55:32.993 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 79
2025-09-13 09:55:32.993 [Thd =111]  Info Default  开始扫描条带； [79/120]
2025-09-13 09:55:32.995 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:32.997 [Thd =46]  Info Default ***row:79, vectorBeginX:-16.356, vectorBeginY:3.747, captureBeginX:-12.736, captureBeginY:3.747, captureEndX:10.761, captureEndY:3.747, vectorEndX:14.663, vectorEndY:3.747
2025-09-13 09:55:32.997 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:32.998 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361365558642,EndPoint:-10.7607378168462
2025-09-13 09:55:34.198 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:79
2025-09-13 09:55:34.199 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:34.199 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:34.202 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:79
2025-09-13 09:55:34.202 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:34.202 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:B_SourceLightType
2025-09-13 09:55:34.202 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:A_SourceLightType
2025-09-13 09:55:34.202 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,B_SourceLightType
2025-09-13 09:55:34.202 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,A_SourceLightType
2025-09-13 09:55:34.248 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:34.251 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_79_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:34.301 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:34.303 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_79_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:34.467 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;79/120,
2025-09-13 09:55:34.476 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:34.621 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:34.867 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:34
2025-09-13 09:55:34.921 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:34
2025-09-13 09:55:34.927 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:34
2025-09-13 09:55:34.972 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 80
2025-09-13 09:55:34.972 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 80
2025-09-13 09:55:34.972 [Thd =221]  Info Default  开始扫描条带； [80/120]
2025-09-13 09:55:34.974 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:34.977 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:3.31913, CaptureEndX:-12.39933, CaptureEndY:3.31913, VectorBeginX:14.66323, VectorBeginY:3.31913, VectorEndX:-16.35589, VectorEndY:3.31913, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:34.977 [Thd =46]  Info Default ***row:80, vectorBeginX:14.663, vectorBeginY:3.319, captureBeginX:11.098, captureBeginY:3.319, captureEndX:-12.399, captureEndY:3.319, vectorEndX:-16.356, vectorEndY:3.319
2025-09-13 09:55:34.977 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:34.978 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097548027524,EndPoint:12.3993263451864
2025-09-13 09:55:35.004 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:35
2025-09-13 09:55:36.178 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:80
2025-09-13 09:55:36.178 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:36.178 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:36.179 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:80
2025-09-13 09:55:36.179 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:36.179 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:A_SourceLightType
2025-09-13 09:55:36.179 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:B_SourceLightType
2025-09-13 09:55:36.179 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,A_SourceLightType
2025-09-13 09:55:36.179 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,B_SourceLightType
2025-09-13 09:55:36.230 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:36.232 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_80_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:36.280 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:36.285 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_80_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:36.453 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;80/120,
2025-09-13 09:55:36.462 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:36.503 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:36.715 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:36
2025-09-13 09:55:36.753 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:36
2025-09-13 09:55:36.853 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 81
2025-09-13 09:55:36.853 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 81
2025-09-13 09:55:36.853 [Thd =112]  Info Default  开始扫描条带； [81/120]
2025-09-13 09:55:36.855 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:36.857 [Thd =46]  Info Default ***row:81, vectorBeginX:-16.356, vectorBeginY:2.892, captureBeginX:-12.736, captureBeginY:2.892, captureEndX:10.761, captureEndY:2.892, vectorEndX:14.663, vectorEndY:2.892
2025-09-13 09:55:36.857 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:36.858 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361377155321,EndPoint:-10.7607366571783
2025-09-13 09:55:38.066 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:81
2025-09-13 09:55:38.066 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:38.066 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:38.069 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:81
2025-09-13 09:55:38.069 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:38.069 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:A_SourceLightType
2025-09-13 09:55:38.069 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:B_SourceLightType
2025-09-13 09:55:38.069 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,A_SourceLightType
2025-09-13 09:55:38.069 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,B_SourceLightType
2025-09-13 09:55:38.115 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:38.117 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_81_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:38.166 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:38.169 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_81_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:38.324 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;81/120,
2025-09-13 09:55:38.333 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:38.385 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:38.725 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 82
2025-09-13 09:55:38.725 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 82
2025-09-13 09:55:38.725 [Thd =19]  Info Default  开始扫描条带； [82/120]
2025-09-13 09:55:38.728 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:38.730 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:2.46403, CaptureEndX:-12.39932, CaptureEndY:2.46403, VectorBeginX:14.66323, VectorBeginY:2.46403, VectorEndX:-16.35589, VectorEndY:2.46403, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:38.730 [Thd =46]  Info Default ***row:82, vectorBeginX:14.663, vectorBeginY:2.464, captureBeginX:11.098, captureBeginY:2.464, captureEndX:-12.399, captureEndY:2.464, vectorEndX:-16.356, vectorEndY:2.464
2025-09-13 09:55:38.730 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:38.731 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975502858103,EndPoint:12.3993240869001
2025-09-13 09:55:39.931 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:82
2025-09-13 09:55:39.932 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:39.932 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:39.933 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:82
2025-09-13 09:55:39.933 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:39.933 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:B_SourceLightType
2025-09-13 09:55:39.933 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:A_SourceLightType
2025-09-13 09:55:39.933 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,B_SourceLightType
2025-09-13 09:55:39.933 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,A_SourceLightType
2025-09-13 09:55:39.979 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:39.981 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_82_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:40.028 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:40.032 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_82_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:40.199 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;82/120,
2025-09-13 09:55:40.208 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:40.259 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:40.609 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 83
2025-09-13 09:55:40.609 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 83
2025-09-13 09:55:40.609 [Thd =151]  Info Default  开始扫描条带； [83/120]
2025-09-13 09:55:40.611 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:40.614 [Thd =46]  Info Default ***row:83, vectorBeginX:-16.356, vectorBeginY:2.036, captureBeginX:-12.736, captureBeginY:2.036, captureEndX:10.761, captureEndY:2.036, vectorEndX:14.663, vectorEndY:2.036
2025-09-13 09:55:40.614 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:40.615 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736138447954,EndPoint:-10.7607359247564
2025-09-13 09:55:40.761 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:40
2025-09-13 09:55:40.805 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:40
2025-09-13 09:55:41.818 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:83
2025-09-13 09:55:41.818 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:41.818 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:41.819 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:83
2025-09-13 09:55:41.819 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:41.819 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:A_SourceLightType
2025-09-13 09:55:41.819 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:B_SourceLightType
2025-09-13 09:55:41.819 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,A_SourceLightType
2025-09-13 09:55:41.819 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,B_SourceLightType
2025-09-13 09:55:41.864 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:41.866 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_83_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:41.913 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:41.915 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_83_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:42.081 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;83/120,
2025-09-13 09:55:42.090 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:42.135 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:42.483 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 84
2025-09-13 09:55:42.483 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 84
2025-09-13 09:55:42.483 [Thd =221]  Info Default  开始扫描条带； [84/120]
2025-09-13 09:55:42.485 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:42.487 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:1.60893, CaptureEndX:-12.39933, CaptureEndY:1.60893, VectorBeginX:14.66322, VectorBeginY:1.60893, VectorEndX:-16.35590, VectorEndY:1.60893, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:42.487 [Thd =46]  Info Default ***row:84, vectorBeginX:14.663, vectorBeginY:1.609, captureBeginX:11.098, captureBeginY:1.609, captureEndX:-12.399, captureEndY:1.609, vectorEndX:-16.356, vectorEndY:1.609
2025-09-13 09:55:42.487 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:42.489 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975469899027,EndPoint:12.3993273828077
2025-09-13 09:55:42.811 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:42
2025-09-13 09:55:42.828 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:42
2025-09-13 09:55:43.537 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:43
2025-09-13 09:55:43.583 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:43
2025-09-13 09:55:43.690 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:84
2025-09-13 09:55:43.690 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:43.690 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:43.692 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:84
2025-09-13 09:55:43.692 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:43.692 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:B_SourceLightType
2025-09-13 09:55:43.692 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:A_SourceLightType
2025-09-13 09:55:43.692 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,B_SourceLightType
2025-09-13 09:55:43.692 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,A_SourceLightType
2025-09-13 09:55:43.738 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:43.740 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_84_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:43.797 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:43.799 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_84_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:43.957 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;84/120,
2025-09-13 09:55:43.966 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:44.078 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:44.428 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 85
2025-09-13 09:55:44.428 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 85
2025-09-13 09:55:44.428 [Thd =112]  Info Default  开始扫描条带； [85/120]
2025-09-13 09:55:44.430 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:44.433 [Thd =46]  Info Default ***row:85, vectorBeginX:-16.356, vectorBeginY:1.181, captureBeginX:-12.736, captureBeginY:1.181, captureEndX:10.761, captureEndY:1.181, vectorEndX:14.663, vectorEndY:1.181
2025-09-13 09:55:44.433 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:44.434 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361374713915,EndPoint:-10.7607369013189
2025-09-13 09:55:45.636 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:85
2025-09-13 09:55:45.636 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:45.636 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:45.636 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:85
2025-09-13 09:55:45.636 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:45.637 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:A_SourceLightType
2025-09-13 09:55:45.637 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:B_SourceLightType
2025-09-13 09:55:45.637 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,A_SourceLightType
2025-09-13 09:55:45.637 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,B_SourceLightType
2025-09-13 09:55:45.684 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:45.687 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_85_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:45.739 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:45.740 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_85_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:45.904 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;85/120,
2025-09-13 09:55:45.913 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:46.103 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:46.455 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 86
2025-09-13 09:55:46.455 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 86
2025-09-13 09:55:46.455 [Thd =151]  Info Default  开始扫描条带； [86/120]
2025-09-13 09:55:46.458 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:46.460 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:0.75384, CaptureEndX:-12.39932, CaptureEndY:0.75384, VectorBeginX:14.66323, VectorBeginY:0.75384, VectorEndX:-16.35589, VectorEndY:0.75384, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:46.460 [Thd =46]  Info Default ***row:86, vectorBeginX:14.663, vectorBeginY:0.754, captureBeginX:11.098, captureBeginY:0.754, captureEndX:-12.399, captureEndY:0.754, vectorEndX:-16.356, vectorEndY:0.754
2025-09-13 09:55:46.460 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:46.461 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975531544657,EndPoint:12.3993212182447
2025-09-13 09:55:46.716 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:46
2025-09-13 09:55:46.767 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:46
2025-09-13 09:55:46.985 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:46
2025-09-13 09:55:47.036 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:47
2025-09-13 09:55:47.659 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:86
2025-09-13 09:55:47.659 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:47.659 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:47.661 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:86
2025-09-13 09:55:47.661 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:47.661 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:A_SourceLightType
2025-09-13 09:55:47.661 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:B_SourceLightType
2025-09-13 09:55:47.661 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,A_SourceLightType
2025-09-13 09:55:47.661 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,B_SourceLightType
2025-09-13 09:55:47.711 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:47.713 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_86_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:47.769 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:47.770 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_86_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:47.935 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;86/120,
2025-09-13 09:55:47.944 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:47.994 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:48.344 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 87
2025-09-13 09:55:48.344 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 87
2025-09-13 09:55:48.344 [Thd =19]  Info Default  开始扫描条带； [87/120]
2025-09-13 09:55:48.346 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:48.348 [Thd =46]  Info Default ***row:87, vectorBeginX:-16.356, vectorBeginY:0.326, captureBeginX:-12.736, captureBeginY:0.326, captureEndX:10.761, captureEndY:0.326, vectorEndX:14.663, vectorEndY:0.326
2025-09-13 09:55:48.348 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:48.349 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361339923876,EndPoint:-10.7607403803228
2025-09-13 09:55:49.551 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:87
2025-09-13 09:55:49.551 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:49.551 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:49.552 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:87
2025-09-13 09:55:49.552 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:49.552 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:A_SourceLightType
2025-09-13 09:55:49.552 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:B_SourceLightType
2025-09-13 09:55:49.552 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,A_SourceLightType
2025-09-13 09:55:49.552 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,B_SourceLightType
2025-09-13 09:55:49.600 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:49.602 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_87_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:49.663 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:49.665 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_87_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:49.814 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;87/120,
2025-09-13 09:55:49.823 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:49.883 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:50.232 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 88
2025-09-13 09:55:50.232 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 88
2025-09-13 09:55:50.232 [Thd =172]  Info Default  开始扫描条带； [88/120]
2025-09-13 09:55:50.235 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:50.237 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-0.10125, CaptureEndX:-12.39932, CaptureEndY:-0.10125, VectorBeginX:14.66323, VectorBeginY:-0.10125, VectorEndX:-16.35589, VectorEndY:-0.10125, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:50.237 [Thd =46]  Info Default ***row:88, vectorBeginX:14.663, vectorBeginY:-0.101, captureBeginX:11.098, captureBeginY:-0.101, captureEndX:-12.399, captureEndY:-0.101, vectorEndX:-16.356, vectorEndY:-0.101
2025-09-13 09:55:50.237 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:50.239 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975529103686,EndPoint:12.3993214623418
2025-09-13 09:55:50.866 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:50
2025-09-13 09:55:50.892 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:50
2025-09-13 09:55:51.438 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:88
2025-09-13 09:55:51.438 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:51.438 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:51.440 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:88
2025-09-13 09:55:51.440 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:51.440 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:A_SourceLightType
2025-09-13 09:55:51.440 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:B_SourceLightType
2025-09-13 09:55:51.440 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,A_SourceLightType
2025-09-13 09:55:51.440 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,B_SourceLightType
2025-09-13 09:55:51.490 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:51.491 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_88_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:51.547 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:51.549 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_88_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:51.708 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;88/120,
2025-09-13 09:55:51.717 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:51.889 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:52.240 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 89
2025-09-13 09:55:52.240 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 89
2025-09-13 09:55:52.240 [Thd =19]  Info Default  开始扫描条带； [89/120]
2025-09-13 09:55:52.243 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:52.245 [Thd =46]  Info Default ***row:89, vectorBeginX:-16.356, vectorBeginY:-0.529, captureBeginX:-12.736, captureBeginY:-0.529, captureEndX:10.761, captureEndY:-0.529, vectorEndX:14.663, vectorEndY:-0.529
2025-09-13 09:55:52.245 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:52.246 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361347248095,EndPoint:-10.7607396479009
2025-09-13 09:55:52.397 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:52
2025-09-13 09:55:52.422 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:52
2025-09-13 09:55:53.447 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:89
2025-09-13 09:55:53.447 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:53.447 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:53.449 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:89
2025-09-13 09:55:53.449 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:53.449 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:A_SourceLightType
2025-09-13 09:55:53.449 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:B_SourceLightType
2025-09-13 09:55:53.449 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,A_SourceLightType
2025-09-13 09:55:53.449 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,B_SourceLightType
2025-09-13 09:55:53.499 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:53.502 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_89_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:53.551 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:53.552 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_89_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:53.713 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;89/120,
2025-09-13 09:55:53.722 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:53.763 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:54.104 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 90
2025-09-13 09:55:54.104 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 90
2025-09-13 09:55:54.104 [Thd =36]  Info Default  开始扫描条带； [90/120]
2025-09-13 09:55:54.107 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:54.109 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-0.95635, CaptureEndX:-12.39932, CaptureEndY:-0.95635, VectorBeginX:14.66323, VectorBeginY:-0.95635, VectorEndX:-16.35589, VectorEndY:-0.95635, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:54.109 [Thd =46]  Info Default ***row:90, vectorBeginX:14.663, vectorBeginY:-0.956, captureBeginX:11.098, captureBeginY:-0.956, captureEndX:-12.399, captureEndY:-0.956, vectorEndX:-16.356, vectorEndY:-0.956
2025-09-13 09:55:54.109 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:54.110 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975513844805,EndPoint:12.3993229882299
2025-09-13 09:55:54.428 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:54
2025-09-13 09:55:54.453 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:54
2025-09-13 09:55:55.310 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:90
2025-09-13 09:55:55.311 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:55.311 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:55.311 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:90
2025-09-13 09:55:55.311 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:55.311 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:A_SourceLightType
2025-09-13 09:55:55.311 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,A_SourceLightType
2025-09-13 09:55:55.311 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,B_SourceLightType
2025-09-13 09:55:55.311 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:B_SourceLightType
2025-09-13 09:55:55.359 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:55.361 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_90_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:55.418 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:55.420 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_90_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:55.581 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;90/120,
2025-09-13 09:55:55.590 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:55.643 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:55.992 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 91
2025-09-13 09:55:55.992 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 91
2025-09-13 09:55:55.992 [Thd =51]  Info Default  开始扫描条带； [91/120]
2025-09-13 09:55:55.994 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:55.997 [Thd =46]  Info Default ***row:91, vectorBeginX:-16.356, vectorBeginY:-1.384, captureBeginX:-12.736, captureBeginY:-1.384, captureEndX:10.761, captureEndY:-1.384, vectorEndX:14.663, vectorEndY:-1.384
2025-09-13 09:55:55.997 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:55.998 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361339313524,EndPoint:-10.760740441358
2025-09-13 09:55:56.459 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:56
2025-09-13 09:55:56.485 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:56
2025-09-13 09:55:57.199 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:91
2025-09-13 09:55:57.199 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:57.199 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:57.201 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:91
2025-09-13 09:55:57.201 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:57.201 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:A_SourceLightType
2025-09-13 09:55:57.201 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:B_SourceLightType
2025-09-13 09:55:57.201 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,A_SourceLightType
2025-09-13 09:55:57.201 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,B_SourceLightType
2025-09-13 09:55:57.249 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:57.251 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_91_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:57.299 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:57.300 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_91_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:57.464 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;91/120,
2025-09-13 09:55:57.473 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:57.643 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:57.991 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 92
2025-09-13 09:55:57.991 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 92
2025-09-13 09:55:57.991 [Thd =111]  Info Default  开始扫描条带； [92/120]
2025-09-13 09:55:57.994 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:55:57.996 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-1.81145, CaptureEndX:-12.39932, CaptureEndY:-1.81145, VectorBeginX:14.66323, VectorBeginY:-1.81145, VectorEndX:-16.35589, VectorEndY:-1.81145, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:55:57.996 [Thd =46]  Info Default ***row:92, vectorBeginX:14.663, vectorBeginY:-1.811, captureBeginX:11.098, captureBeginY:-1.811, captureEndX:-12.399, captureEndY:-1.811, vectorEndX:-16.356, vectorEndY:-1.811
2025-09-13 09:55:57.996 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:57.998 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097552788299,EndPoint:12.3993215844114
2025-09-13 09:55:58.498 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:55:58
2025-09-13 09:55:58.524 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:55:58
2025-09-13 09:55:59.197 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:92
2025-09-13 09:55:59.197 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:59.198 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:55:59.198 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:92
2025-09-13 09:55:59.198 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:55:59.198 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:A_SourceLightType
2025-09-13 09:55:59.198 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,A_SourceLightType
2025-09-13 09:55:59.199 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,B_SourceLightType
2025-09-13 09:55:59.199 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:B_SourceLightType
2025-09-13 09:55:59.253 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:55:59.255 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_92_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:59.307 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:55:59.308 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_92_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:55:59.466 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;92/120,
2025-09-13 09:55:59.475 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:55:59.518 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:55:59.868 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 93
2025-09-13 09:55:59.868 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 93
2025-09-13 09:55:59.868 [Thd =38]  Info Default  开始扫描条带； [93/120]
2025-09-13 09:55:59.870 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:55:59.873 [Thd =46]  Info Default ***row:93, vectorBeginX:-16.356, vectorBeginY:-2.239, captureBeginX:-12.736, captureBeginY:-2.239, captureEndX:10.761, captureEndY:-2.239, vectorEndX:14.663, vectorEndY:-2.239
2025-09-13 09:55:59.873 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:55:59.874 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736139607622,EndPoint:-10.7607347650884
2025-09-13 09:56:00.029 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:00
2025-09-13 09:56:00.066 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:00
2025-09-13 09:56:01.075 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:93
2025-09-13 09:56:01.075 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:01.075 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:01.078 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:93
2025-09-13 09:56:01.078 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:01.078 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:A_SourceLightType
2025-09-13 09:56:01.078 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:B_SourceLightType
2025-09-13 09:56:01.078 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,A_SourceLightType
2025-09-13 09:56:01.078 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,B_SourceLightType
2025-09-13 09:56:01.125 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:01.127 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_93_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:01.189 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:01.191 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_93_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:01.348 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;93/120,
2025-09-13 09:56:01.357 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:01.422 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:01.773 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 94
2025-09-13 09:56:01.773 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 94
2025-09-13 09:56:01.773 [Thd =180]  Info Default  开始扫描条带； [94/120]
2025-09-13 09:56:01.775 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:01.777 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-2.66654, CaptureEndX:-12.39933, CaptureEndY:-2.66654, VectorBeginX:14.66322, VectorBeginY:-2.66654, VectorEndX:-16.35589, VectorEndY:-2.66654, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:01.777 [Thd =46]  Info Default ***row:94, vectorBeginX:14.663, vectorBeginY:-2.667, captureBeginX:11.098, captureBeginY:-2.667, captureEndX:-12.399, captureEndY:-2.667, vectorEndX:-16.356, vectorEndY:-2.667
2025-09-13 09:56:01.778 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:01.779 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975475392046,EndPoint:12.3993268335058
2025-09-13 09:56:02.980 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:94
2025-09-13 09:56:02.980 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:02.980 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:02.982 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:94
2025-09-13 09:56:02.982 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:02.982 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:A_SourceLightType
2025-09-13 09:56:02.982 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:B_SourceLightType
2025-09-13 09:56:02.982 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,A_SourceLightType
2025-09-13 09:56:02.982 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,B_SourceLightType
2025-09-13 09:56:03.030 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:03.032 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_94_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:03.082 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:03
2025-09-13 09:56:03.084 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:03.086 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_94_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:03.114 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:03
2025-09-13 09:56:03.251 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;94/120,
2025-09-13 09:56:03.261 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:03.411 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:03.761 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 95
2025-09-13 09:56:03.761 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 95
2025-09-13 09:56:03.761 [Thd =151]  Info Default  开始扫描条带； [95/120]
2025-09-13 09:56:03.763 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:03.765 [Thd =46]  Info Default ***row:95, vectorBeginX:-16.356, vectorBeginY:-3.094, captureBeginX:-12.736, captureBeginY:-3.094, captureEndX:10.761, captureEndY:-3.094, vectorEndX:14.663, vectorEndY:-3.094
2025-09-13 09:56:03.765 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:03.766 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361393024462,EndPoint:-10.7607350702642
2025-09-13 09:56:04.202 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:04
2025-09-13 09:56:04.228 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:04
2025-09-13 09:56:04.969 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:95
2025-09-13 09:56:04.970 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:04.970 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:04.970 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:95
2025-09-13 09:56:04.970 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:04.970 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:A_SourceLightType
2025-09-13 09:56:04.970 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,A_SourceLightType
2025-09-13 09:56:04.970 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,B_SourceLightType
2025-09-13 09:56:04.970 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:B_SourceLightType
2025-09-13 09:56:05.030 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:05.032 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_95_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:05.081 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:05.084 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_95_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:05.236 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;95/120,
2025-09-13 09:56:05.259 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:05.391 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:05.740 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 96
2025-09-13 09:56:05.740 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 96
2025-09-13 09:56:05.740 [Thd =112]  Info Default  开始扫描条带； [96/120]
2025-09-13 09:56:05.742 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:05.746 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-3.52164, CaptureEndX:-12.39932, CaptureEndY:-3.52164, VectorBeginX:14.66323, VectorBeginY:-3.52164, VectorEndX:-16.35589, VectorEndY:-3.52164, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:05.746 [Thd =46]  Info Default ***row:96, vectorBeginX:14.663, vectorBeginY:-3.522, captureBeginX:11.098, captureBeginY:-3.522, captureEndX:-12.399, captureEndY:-3.522, vectorEndX:-16.356, vectorEndY:-3.522
2025-09-13 09:56:05.746 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:05.747 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975499806147,EndPoint:12.3993243920957
2025-09-13 09:56:06.945 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:96
2025-09-13 09:56:06.946 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:06.946 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:06.947 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:96
2025-09-13 09:56:06.947 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:06.947 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:B_SourceLightType
2025-09-13 09:56:06.947 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:A_SourceLightType
2025-09-13 09:56:06.947 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,B_SourceLightType
2025-09-13 09:56:06.947 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,A_SourceLightType
2025-09-13 09:56:06.998 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:07.000 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_96_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:07.056 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:07.058 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_96_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:07.214 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;96/120,
2025-09-13 09:56:07.223 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:07.267 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:07.521 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:07
2025-09-13 09:56:07.616 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 97
2025-09-13 09:56:07.616 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 97
2025-09-13 09:56:07.616 [Thd =221]  Info Default  开始扫描条带； [97/120]
2025-09-13 09:56:07.619 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:07.621 [Thd =46]  Info Default ***row:97, vectorBeginX:-16.356, vectorBeginY:-3.949, captureBeginX:-12.736, captureBeginY:-3.949, captureEndX:10.761, captureEndY:-3.949, vectorEndX:14.663, vectorEndY:-3.949
2025-09-13 09:56:07.621 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:07.622 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361402790087,EndPoint:-10.7607340937017
2025-09-13 09:56:07.632 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:07
2025-09-13 09:56:08.230 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:08
2025-09-13 09:56:08.247 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:08
2025-09-13 09:56:08.834 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:97
2025-09-13 09:56:08.834 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:08.835 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:08.843 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:97
2025-09-13 09:56:08.843 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:08.843 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:B_SourceLightType
2025-09-13 09:56:08.843 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,B_SourceLightType
2025-09-13 09:56:08.843 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,A_SourceLightType
2025-09-13 09:56:08.843 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:A_SourceLightType
2025-09-13 09:56:08.889 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:08.891 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_97_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:08.947 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:08.948 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_97_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:09.087 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;97/120,
2025-09-13 09:56:09.096 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:09.275 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:09.315 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:09
2025-09-13 09:56:09.373 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:09
2025-09-13 09:56:09.625 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 98
2025-09-13 09:56:09.625 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 98
2025-09-13 09:56:09.625 [Thd =66]  Info Default  开始扫描条带； [98/120]
2025-09-13 09:56:09.627 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:09.629 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-4.37673, CaptureEndX:-12.39933, CaptureEndY:-4.37673, VectorBeginX:14.66322, VectorBeginY:-4.37673, VectorEndX:-16.35589, VectorEndY:-4.37673, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:09.630 [Thd =46]  Info Default ***row:98, vectorBeginX:14.663, vectorBeginY:-4.377, captureBeginX:11.098, captureBeginY:-4.377, captureEndX:-12.399, captureEndY:-4.377, vectorEndX:-16.356, vectorEndY:-4.377
2025-09-13 09:56:09.630 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:09.631 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975472340204,EndPoint:12.39932713869
2025-09-13 09:56:10.833 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:98
2025-09-13 09:56:10.833 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:10.833 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:10.834 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:98
2025-09-13 09:56:10.834 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:10.834 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:A_SourceLightType
2025-09-13 09:56:10.834 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:B_SourceLightType
2025-09-13 09:56:10.834 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,A_SourceLightType
2025-09-13 09:56:10.834 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,B_SourceLightType
2025-09-13 09:56:10.896 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:10.898 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_98_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:10.953 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:10.955 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_98_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:11.101 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;98/120,
2025-09-13 09:56:11.110 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:11.301 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:11.652 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 99
2025-09-13 09:56:11.652 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 99
2025-09-13 09:56:11.652 [Thd =48]  Info Default  开始扫描条带； [99/120]
2025-09-13 09:56:11.654 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:11.657 [Thd =46]  Info Default ***row:99, vectorBeginX:-16.356, vectorBeginY:-4.804, captureBeginX:-12.736, captureBeginY:-4.804, captureEndX:10.761, captureEndY:-4.804, vectorEndX:14.663, vectorEndY:-4.804
2025-09-13 09:56:11.657 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:11.658 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361371051806,EndPoint:-10.7607372675298
2025-09-13 09:56:12.211 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:12
2025-09-13 09:56:12.237 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:12
2025-09-13 09:56:12.861 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:99
2025-09-13 09:56:12.861 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:12.861 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:12.862 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:99
2025-09-13 09:56:12.862 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:12.862 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:A_SourceLightType
2025-09-13 09:56:12.862 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:B_SourceLightType
2025-09-13 09:56:12.862 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,A_SourceLightType
2025-09-13 09:56:12.862 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,B_SourceLightType
2025-09-13 09:56:12.916 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:12.919 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_99_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:12.968 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:12.970 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_99_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:13.126 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;99/120,
2025-09-13 09:56:13.135 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:13.225 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:13.579 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 100
2025-09-13 09:56:13.579 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 100
2025-09-13 09:56:13.579 [Thd =66]  Info Default  开始扫描条带； [100/120]
2025-09-13 09:56:13.581 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:13.583 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-5.23182, CaptureEndX:-12.39933, CaptureEndY:-5.23182, VectorBeginX:14.66322, VectorBeginY:-5.23182, VectorEndX:-16.35590, VectorEndY:-5.23182, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:13.583 [Thd =46]  Info Default ***row:100, vectorBeginX:14.663, vectorBeginY:-5.232, captureBeginX:11.098, captureBeginY:-5.232, captureEndX:-12.399, captureEndY:-5.232, vectorEndX:-16.356, vectorEndY:-5.232
2025-09-13 09:56:13.583 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:13.585 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975469288843,EndPoint:12.3993274438261
2025-09-13 09:56:14.545 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:14
2025-09-13 09:56:14.570 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:14
2025-09-13 09:56:14.784 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:100
2025-09-13 09:56:14.784 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:14.784 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:14.785 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:100
2025-09-13 09:56:14.786 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:14.786 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:A_SourceLightType
2025-09-13 09:56:14.786 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:B_SourceLightType
2025-09-13 09:56:14.786 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,A_SourceLightType
2025-09-13 09:56:14.786 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,B_SourceLightType
2025-09-13 09:56:14.833 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:14.835 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_100_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:14.883 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:14.885 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_100_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:15.050 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;100/120,
2025-09-13 09:56:15.059 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:15.103 [Thd =68]  Info Default m_bIdel
2025-09-13 09:56:15.178 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:15.527 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 101
2025-09-13 09:56:15.527 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 101
2025-09-13 09:56:15.527 [Thd =66]  Info Default  开始扫描条带； [101/120]
2025-09-13 09:56:15.529 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:15.531 [Thd =46]  Info Default ***row:101, vectorBeginX:-16.356, vectorBeginY:-5.659, captureBeginX:-12.736, captureBeginY:-5.659, captureEndX:10.761, captureEndY:-5.659, vectorEndX:14.663, vectorEndY:-5.659
2025-09-13 09:56:15.531 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:15.533 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361379596728,EndPoint:-10.7607364130376
2025-09-13 09:56:15.576 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:15
2025-09-13 09:56:15.601 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:15
2025-09-13 09:56:16.104 [Thd =49]  Error Default PLCKeyence:ReadDeviceCmd failed.
2025-09-13 09:56:16.735 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:101
2025-09-13 09:56:16.735 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:16.735 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:16.736 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:101
2025-09-13 09:56:16.736 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:16.736 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:B_SourceLightType
2025-09-13 09:56:16.736 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:A_SourceLightType
2025-09-13 09:56:16.736 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,B_SourceLightType
2025-09-13 09:56:16.736 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,A_SourceLightType
2025-09-13 09:56:16.785 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:16.787 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_101_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:16.838 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:16.840 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_101_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:17.007 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;101/120,
2025-09-13 09:56:17.016 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:17.162 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:17.513 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 102
2025-09-13 09:56:17.513 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 102
2025-09-13 09:56:17.513 [Thd =38]  Info Default  开始扫描条带； [102/120]
2025-09-13 09:56:17.516 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:17.518 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-6.08692, CaptureEndX:-12.39932, CaptureEndY:-6.08692, VectorBeginX:14.66323, VectorBeginY:-6.08692, VectorEndX:-16.35589, VectorEndY:-6.08692, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:17.518 [Thd =46]  Info Default ***row:102, vectorBeginX:14.663, vectorBeginY:-6.087, captureBeginX:11.098, captureBeginY:-6.087, captureEndX:-12.399, captureEndY:-6.087, vectorEndX:-16.356, vectorEndY:-6.087
2025-09-13 09:56:17.518 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:17.520 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975524220377,EndPoint:12.3993219506727
2025-09-13 09:56:18.709 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:18
2025-09-13 09:56:18.720 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:102
2025-09-13 09:56:18.720 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:18.724 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:102
2025-09-13 09:56:18.724 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:18.724 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:18.725 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:A_SourceLightType
2025-09-13 09:56:18.725 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:B_SourceLightType
2025-09-13 09:56:18.725 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,A_SourceLightType
2025-09-13 09:56:18.725 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,B_SourceLightType
2025-09-13 09:56:18.770 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:18
2025-09-13 09:56:18.774 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:18.776 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_102_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:18.828 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:18.829 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_102_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:18.987 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;102/120,
2025-09-13 09:56:18.996 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:19.209 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:19.551 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 103
2025-09-13 09:56:19.551 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 103
2025-09-13 09:56:19.551 [Thd =77]  Info Default  开始扫描条带； [103/120]
2025-09-13 09:56:19.554 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:19.556 [Thd =46]  Info Default ***row:103, vectorBeginX:-16.356, vectorBeginY:-6.514, captureBeginX:-12.736, captureBeginY:-6.514, captureEndX:10.761, captureEndY:-6.514, vectorEndX:14.663, vectorEndY:-6.514
2025-09-13 09:56:19.556 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:19.557 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361358234423,EndPoint:-10.7607385492681
2025-09-13 09:56:19.841 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:19
2025-09-13 09:56:19.889 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:19
2025-09-13 09:56:20.762 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:103
2025-09-13 09:56:20.762 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:20.762 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:20.763 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:103
2025-09-13 09:56:20.763 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:20.763 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:B_SourceLightType
2025-09-13 09:56:20.763 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:A_SourceLightType
2025-09-13 09:56:20.763 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,B_SourceLightType
2025-09-13 09:56:20.763 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,A_SourceLightType
2025-09-13 09:56:20.814 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:20.816 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_103_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:20.875 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:20.876 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_103_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:21.028 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;103/120,
2025-09-13 09:56:21.037 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:21.316 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:21.667 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 104
2025-09-13 09:56:21.667 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 104
2025-09-13 09:56:21.667 [Thd =180]  Info Default  开始扫描条带； [104/120]
2025-09-13 09:56:21.676 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:21.678 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-6.94201, CaptureEndX:-12.39932, CaptureEndY:-6.94201, VectorBeginX:14.66323, VectorBeginY:-6.94201, VectorEndX:-16.35589, VectorEndY:-6.94201, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:21.678 [Thd =46]  Info Default ***row:104, vectorBeginX:14.663, vectorBeginY:-6.942, captureBeginX:11.098, captureBeginY:-6.942, captureEndX:-12.399, captureEndY:-6.942, vectorEndX:-16.356, vectorEndY:-6.942
2025-09-13 09:56:21.678 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:21.680 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975535206972,EndPoint:12.3993208520132
2025-09-13 09:56:22.017 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:22
2025-09-13 09:56:22.047 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:22
2025-09-13 09:56:22.880 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:104
2025-09-13 09:56:22.880 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:22.880 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:22.881 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:104
2025-09-13 09:56:22.881 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:22.881 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:B_SourceLightType
2025-09-13 09:56:22.881 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:A_SourceLightType
2025-09-13 09:56:22.881 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,B_SourceLightType
2025-09-13 09:56:22.881 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,A_SourceLightType
2025-09-13 09:56:22.931 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:22.935 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_104_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:22.992 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:22.993 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_104_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:23.148 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;104/120,
2025-09-13 09:56:23.157 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:23.343 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:23.378 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:23
2025-09-13 09:56:23.425 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:23
2025-09-13 09:56:23.426 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:23
2025-09-13 09:56:23.478 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:23
2025-09-13 09:56:23.694 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 105
2025-09-13 09:56:23.694 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 105
2025-09-13 09:56:23.694 [Thd =136]  Info Default  开始扫描条带； [105/120]
2025-09-13 09:56:23.696 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:23.698 [Thd =46]  Info Default ***row:105, vectorBeginX:-16.356, vectorBeginY:-7.370, captureBeginX:-12.736, captureBeginY:-7.370, captureEndX:10.761, captureEndY:-7.370, vectorEndX:14.663, vectorEndY:-7.370
2025-09-13 09:56:23.698 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:23.699 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361310016649,EndPoint:-10.7607433710455
2025-09-13 09:56:24.902 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:105
2025-09-13 09:56:24.902 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:24.902 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:24.903 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:105
2025-09-13 09:56:24.903 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:24.903 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:B_SourceLightType
2025-09-13 09:56:24.903 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:A_SourceLightType
2025-09-13 09:56:24.903 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,B_SourceLightType
2025-09-13 09:56:24.903 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,A_SourceLightType
2025-09-13 09:56:24.955 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:24.957 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_105_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:24.983 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:24
2025-09-13 09:56:25.001 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:25
2025-09-13 09:56:25.006 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:25.007 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_105_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:25.164 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;105/120,
2025-09-13 09:56:25.173 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:25.224 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:25.562 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 106
2025-09-13 09:56:25.562 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 106
2025-09-13 09:56:25.562 [Thd =172]  Info Default  开始扫描条带； [106/120]
2025-09-13 09:56:25.564 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:25.566 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-7.79711, CaptureEndX:-12.39932, CaptureEndY:-7.79711, VectorBeginX:14.66323, VectorBeginY:-7.79711, VectorEndX:-16.35589, VectorEndY:-7.79711, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:25.566 [Thd =46]  Info Default ***row:106, vectorBeginX:14.663, vectorBeginY:-7.797, captureBeginX:11.098, captureBeginY:-7.797, captureEndX:-12.399, captureEndY:-7.797, vectorEndX:-16.356, vectorEndY:-7.797
2025-09-13 09:56:25.566 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:25.567 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975542531794,EndPoint:12.399320119531
2025-09-13 09:56:26.770 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:106
2025-09-13 09:56:26.771 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:26.771 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:26.771 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:106
2025-09-13 09:56:26.771 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:26.771 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:A_SourceLightType
2025-09-13 09:56:26.771 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,A_SourceLightType
2025-09-13 09:56:26.771 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,B_SourceLightType
2025-09-13 09:56:26.771 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:B_SourceLightType
2025-09-13 09:56:26.817 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:26.819 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_106_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:26.871 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:26.873 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_106_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:27.033 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;106/120,
2025-09-13 09:56:27.042 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:27.166 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:27.519 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 107
2025-09-13 09:56:27.519 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 107
2025-09-13 09:56:27.519 [Thd =150]  Info Default  开始扫描条带； [107/120]
2025-09-13 09:56:27.523 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:27.525 [Thd =46]  Info Default ***row:107, vectorBeginX:-16.356, vectorBeginY:-8.225, captureBeginX:-12.736, captureBeginY:-8.225, captureEndX:10.761, captureEndY:-8.225, vectorEndX:14.663, vectorEndY:-8.225
2025-09-13 09:56:27.525 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:27.526 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361313068407,EndPoint:-10.7607430658697
2025-09-13 09:56:28.010 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:28
2025-09-13 09:56:28.035 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:28
2025-09-13 09:56:28.729 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:107
2025-09-13 09:56:28.729 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:28.729 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:28.730 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:107
2025-09-13 09:56:28.730 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:28.730 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:A_SourceLightType
2025-09-13 09:56:28.730 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,A_SourceLightType
2025-09-13 09:56:28.730 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,B_SourceLightType
2025-09-13 09:56:28.730 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:B_SourceLightType
2025-09-13 09:56:28.777 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:28.779 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_107_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:28.828 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:28.830 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_107_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:28.992 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;107/120,
2025-09-13 09:56:29.001 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:29.042 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:29.392 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 108
2025-09-13 09:56:29.392 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 108
2025-09-13 09:56:29.392 [Thd =19]  Info Default  开始扫描条带； [108/120]
2025-09-13 09:56:29.394 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:29.397 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-8.65221, CaptureEndX:-12.39932, CaptureEndY:-8.65221, VectorBeginX:14.66323, VectorBeginY:-8.65221, VectorEndX:-16.35589, VectorEndY:-8.65221, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:29.397 [Thd =46]  Info Default ***row:108, vectorBeginX:14.663, vectorBeginY:-8.652, captureBeginX:11.098, captureBeginY:-8.652, captureEndX:-12.399, captureEndY:-8.652, vectorEndX:-16.356, vectorEndY:-8.652
2025-09-13 09:56:29.397 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:29.398 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975543142107,EndPoint:12.3993200584997
2025-09-13 09:56:30.597 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:108
2025-09-13 09:56:30.598 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:30.598 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:30.599 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:108
2025-09-13 09:56:30.599 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:30.599 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:B_SourceLightType
2025-09-13 09:56:30.599 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:A_SourceLightType
2025-09-13 09:56:30.599 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,B_SourceLightType
2025-09-13 09:56:30.599 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,A_SourceLightType
2025-09-13 09:56:30.646 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:30.648 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_108_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:30.700 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:30.702 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_108_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:30.873 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;108/120,
2025-09-13 09:56:30.882 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:30.929 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:31.278 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 109
2025-09-13 09:56:31.278 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 109
2025-09-13 09:56:31.278 [Thd =131]  Info Default  开始扫描条带； [109/120]
2025-09-13 09:56:31.283 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:31.285 [Thd =46]  Info Default ***row:109, vectorBeginX:-16.356, vectorBeginY:-9.080, captureBeginX:-12.736, captureBeginY:-9.080, captureEndX:10.761, captureEndY:-9.080, vectorEndX:14.663, vectorEndY:-9.080
2025-09-13 09:56:31.285 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:31.286 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361347248095,EndPoint:-10.7607396479009
2025-09-13 09:56:31.548 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:31
2025-09-13 09:56:31.581 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:31
2025-09-13 09:56:32.489 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:109
2025-09-13 09:56:32.489 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:32.489 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:32.490 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:109
2025-09-13 09:56:32.490 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:32.490 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:A_SourceLightType
2025-09-13 09:56:32.490 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:B_SourceLightType
2025-09-13 09:56:32.490 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,A_SourceLightType
2025-09-13 09:56:32.490 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,B_SourceLightType
2025-09-13 09:56:32.548 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:32.550 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_109_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:32.598 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:32.601 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_109_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:32.755 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;109/120,
2025-09-13 09:56:32.764 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:32.821 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:33.162 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 110
2025-09-13 09:56:33.162 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 110
2025-09-13 09:56:33.162 [Thd =112]  Info Default  开始扫描条带； [110/120]
2025-09-13 09:56:33.164 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:33.167 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:-9.50731, CaptureEndX:-12.39932, CaptureEndY:-9.50731, VectorBeginX:14.66323, VectorBeginY:-9.50731, VectorEndX:-16.35588, VectorEndY:-9.50731, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:33.167 [Thd =46]  Info Default ***row:110, vectorBeginX:14.663, vectorBeginY:-9.507, captureBeginX:11.098, captureBeginY:-9.507, captureEndX:-12.399, captureEndY:-9.507, vectorEndX:-16.356, vectorEndY:-9.507
2025-09-13 09:56:33.167 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:33.169 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975573048906,EndPoint:12.3993170678198
2025-09-13 09:56:33.588 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:33
2025-09-13 09:56:33.631 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:33
2025-09-13 09:56:34.136 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:34
2025-09-13 09:56:34.152 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:34
2025-09-13 09:56:34.367 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:110
2025-09-13 09:56:34.367 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:34.368 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:34.369 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:110
2025-09-13 09:56:34.369 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:34.369 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:B_SourceLightType
2025-09-13 09:56:34.369 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,B_SourceLightType
2025-09-13 09:56:34.369 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,A_SourceLightType
2025-09-13 09:56:34.370 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:A_SourceLightType
2025-09-13 09:56:34.420 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:34.422 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_110_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:34.471 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:34.473 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_110_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:34.641 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;110/120,
2025-09-13 09:56:34.650 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:34.760 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:35.110 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 111
2025-09-13 09:56:35.110 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 111
2025-09-13 09:56:35.110 [Thd =112]  Info Default  开始扫描条带； [111/120]
2025-09-13 09:56:35.112 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:35.115 [Thd =46]  Info Default ***row:111, vectorBeginX:-16.356, vectorBeginY:-9.935, captureBeginX:-12.736, captureBeginY:-9.935, captureEndX:10.761, captureEndY:-9.935, vectorEndX:14.663, vectorEndY:-9.935
2025-09-13 09:56:35.115 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:35.116 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361303302782,EndPoint:-10.7607440424322
2025-09-13 09:56:36.318 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:111
2025-09-13 09:56:36.318 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:36.318 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:36.319 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:111
2025-09-13 09:56:36.319 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:36.319 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:A_SourceLightType
2025-09-13 09:56:36.319 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:B_SourceLightType
2025-09-13 09:56:36.319 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,A_SourceLightType
2025-09-13 09:56:36.319 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,B_SourceLightType
2025-09-13 09:56:36.366 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:36.368 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_111_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:36.417 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:36.419 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_111_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:36.585 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;111/120,
2025-09-13 09:56:36.595 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:36.663 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:36
2025-09-13 09:56:36.715 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:36.757 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:36
2025-09-13 09:56:37.062 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 112
2025-09-13 09:56:37.062 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 112
2025-09-13 09:56:37.062 [Thd =172]  Info Default  开始扫描条带； [112/120]
2025-09-13 09:56:37.064 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:37.067 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:-10.36240, CaptureEndX:-12.39932, CaptureEndY:-10.36240, VectorBeginX:14.66324, VectorBeginY:-10.36240, VectorEndX:-16.35588, VectorEndY:-10.36240, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:37.067 [Thd =46]  Info Default ***row:112, vectorBeginX:14.663, vectorBeginY:-10.362, captureBeginX:11.098, captureBeginY:-10.362, captureEndX:-12.399, captureEndY:-10.362, vectorEndX:-16.356, vectorEndY:-10.362
2025-09-13 09:56:37.067 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:37.068 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975593191057,EndPoint:12.3993150536047
2025-09-13 09:56:37.258 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:37
2025-09-13 09:56:37.283 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:37
2025-09-13 09:56:38.267 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:112
2025-09-13 09:56:38.268 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:38.268 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:38.269 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:112
2025-09-13 09:56:38.269 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:38.269 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:A_SourceLightType
2025-09-13 09:56:38.269 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,A_SourceLightType
2025-09-13 09:56:38.269 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,B_SourceLightType
2025-09-13 09:56:38.269 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:B_SourceLightType
2025-09-13 09:56:38.318 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:38.320 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_112_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:38.367 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:38.369 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_112_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:38.535 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;112/120,
2025-09-13 09:56:38.544 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:38.586 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:38.936 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 113
2025-09-13 09:56:38.936 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 113
2025-09-13 09:56:38.937 [Thd =19]  Info Default  开始扫描条带； [113/120]
2025-09-13 09:56:38.940 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:38.942 [Thd =46]  Info Default ***row:113, vectorBeginX:-16.356, vectorBeginY:-10.790, captureBeginX:-12.736, captureBeginY:-10.790, captureEndX:10.761, captureEndY:-10.790, vectorEndX:14.663, vectorEndY:-10.790
2025-09-13 09:56:38.942 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:38.944 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361292316454,EndPoint:-10.760745141065
2025-09-13 09:56:40.146 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:113
2025-09-13 09:56:40.146 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:40.147 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:40.147 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:113
2025-09-13 09:56:40.147 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:40.147 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:A_SourceLightType
2025-09-13 09:56:40.147 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:B_SourceLightType
2025-09-13 09:56:40.147 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,A_SourceLightType
2025-09-13 09:56:40.147 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,B_SourceLightType
2025-09-13 09:56:40.203 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:40.205 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_113_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:40.263 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:40.264 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_113_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:40.413 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;113/120,
2025-09-13 09:56:40.422 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:40.675 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:40.951 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:40
2025-09-13 09:56:40.997 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:40
2025-09-13 09:56:41.027 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 114
2025-09-13 09:56:41.027 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 114
2025-09-13 09:56:41.027 [Thd =172]  Info Default  开始扫描条带； [114/120]
2025-09-13 09:56:41.029 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:41.032 [Thd =46]  Info Default CaptureBeginX: 11.09756, CaptureBeginY:-11.21749, CaptureEndX:-12.39932, CaptureEndY:-11.21749, VectorBeginX:14.66323, VectorBeginY:-11.21749, VectorEndX:-16.35589, VectorEndY:-11.21749, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:41.032 [Thd =46]  Info Default ***row:114, vectorBeginX:14.663, vectorBeginY:-11.217, captureBeginX:11.098, captureBeginY:-11.217, captureEndX:-12.399, captureEndY:-11.217, vectorEndX:-16.356, vectorEndY:-11.217
2025-09-13 09:56:41.032 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:41.033 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975564504671,EndPoint:12.3993179222433
2025-09-13 09:56:42.235 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:114
2025-09-13 09:56:42.235 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:42.235 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:42.235 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:114
2025-09-13 09:56:42.235 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:42.235 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:B_SourceLightType
2025-09-13 09:56:42.235 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,B_SourceLightType
2025-09-13 09:56:42.235 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,A_SourceLightType
2025-09-13 09:56:42.235 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:A_SourceLightType
2025-09-13 09:56:42.282 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:42.284 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_114_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:42.339 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:42.340 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_114_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:42.500 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;114/120,
2025-09-13 09:56:42.509 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:42.628 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:42.976 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 115
2025-09-13 09:56:42.976 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 115
2025-09-13 09:56:42.976 [Thd =19]  Info Default  开始扫描条带； [115/120]
2025-09-13 09:56:42.979 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:42.981 [Thd =46]  Info Default ***row:115, vectorBeginX:-16.356, vectorBeginY:-11.645, captureBeginX:-12.736, captureBeginY:-11.645, captureEndX:10.761, captureEndY:-11.645, vectorEndX:14.663, vectorEndY:-11.645
2025-09-13 09:56:42.981 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:42.983 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361310016649,EndPoint:-10.7607433710455
2025-09-13 09:56:42.989 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:42
2025-09-13 09:56:43.019 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:43
2025-09-13 09:56:44.188 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:115
2025-09-13 09:56:44.188 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:115
2025-09-13 09:56:44.188 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:44.188 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:44.188 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:44.188 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:B_SourceLightType
2025-09-13 09:56:44.188 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,B_SourceLightType
2025-09-13 09:56:44.188 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,A_SourceLightType
2025-09-13 09:56:44.188 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:A_SourceLightType
2025-09-13 09:56:44.240 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:44.242 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_115_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:44.290 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:44.292 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_115_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:44.448 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;115/120,
2025-09-13 09:56:44.457 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:44.510 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:44.531 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:44
2025-09-13 09:56:44.548 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:44
2025-09-13 09:56:44.858 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 116
2025-09-13 09:56:44.858 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 116
2025-09-13 09:56:44.858 [Thd =150]  Info Default  开始扫描条带； [116/120]
2025-09-13 09:56:44.860 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:44.863 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-12.07259, CaptureEndX:-12.39932, CaptureEndY:-12.07259, VectorBeginX:14.66323, VectorBeginY:-12.07259, VectorEndX:-16.35589, VectorEndY:-12.07259, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:44.863 [Thd =46]  Info Default ***row:116, vectorBeginX:14.663, vectorBeginY:-12.073, captureBeginX:11.098, captureBeginY:-12.073, captureEndX:-12.399, captureEndY:-12.073, vectorEndX:-16.356, vectorEndY:-12.073
2025-09-13 09:56:44.863 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:44.864 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975548024958,EndPoint:12.3993195702146
2025-09-13 09:56:45.049 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:45
2025-09-13 09:56:45.067 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:45
2025-09-13 09:56:46.065 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:116
2025-09-13 09:56:46.065 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:46.065 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:46.066 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:116
2025-09-13 09:56:46.066 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:46.066 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:A_SourceLightType
2025-09-13 09:56:46.066 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:B_SourceLightType
2025-09-13 09:56:46.066 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,A_SourceLightType
2025-09-13 09:56:46.067 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,B_SourceLightType
2025-09-13 09:56:46.117 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:46.119 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_116_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:46.172 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:46.173 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_116_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:46.330 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;116/120,
2025-09-13 09:56:46.339 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:46.405 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:46.684 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:46
2025-09-13 09:56:46.701 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:46
2025-09-13 09:56:46.754 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 117
2025-09-13 09:56:46.754 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 117
2025-09-13 09:56:46.754 [Thd =131]  Info Default  开始扫描条带； [117/120]
2025-09-13 09:56:46.756 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:46.758 [Thd =46]  Info Default ***row:117, vectorBeginX:-16.356, vectorBeginY:-12.500, captureBeginX:-12.736, captureBeginY:-12.500, captureEndX:10.761, captureEndY:-12.500, vectorEndX:14.663, vectorEndY:-12.500
2025-09-13 09:56:46.758 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:46.760 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361328937548,EndPoint:-10.7607414789556
2025-09-13 09:56:47.962 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:117
2025-09-13 09:56:47.962 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:47.962 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:47.963 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:117
2025-09-13 09:56:47.963 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:47.963 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:A_SourceLightType
2025-09-13 09:56:47.963 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,A_SourceLightType
2025-09-13 09:56:47.963 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,B_SourceLightType
2025-09-13 09:56:47.963 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:B_SourceLightType
2025-09-13 09:56:48.010 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:48.012 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_117_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:48.065 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:48.067 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_117_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:48.227 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;117/120,
2025-09-13 09:56:48.236 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:48.296 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:48.645 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 118
2025-09-13 09:56:48.645 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 118
2025-09-13 09:56:48.645 [Thd =38]  Info Default  开始扫描条带； [118/120]
2025-09-13 09:56:48.647 [Thd =46]  Info Default ScanDirection is Positive
2025-09-13 09:56:48.649 [Thd =46]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:-12.92768, CaptureEndX:-12.39932, CaptureEndY:-12.92768, VectorBeginX:14.66323, VectorBeginY:-12.92768, VectorEndX:-16.35589, VectorEndY:-12.92768, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:56:48.649 [Thd =46]  Info Default ***row:118, vectorBeginX:14.663, vectorBeginY:-12.928, captureBeginX:11.098, captureBeginY:-12.928, captureEndX:-12.399, captureEndY:-12.928, vectorEndX:-16.356, vectorEndY:-12.928
2025-09-13 09:56:48.649 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:48.650 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975507131167,EndPoint:12.3993236595937
2025-09-13 09:56:49.851 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:118
2025-09-13 09:56:49.852 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:49.852 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:49.852 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:118
2025-09-13 09:56:49.852 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:49.852 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:B_SourceLightType
2025-09-13 09:56:49.852 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:A_SourceLightType
2025-09-13 09:56:49.852 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,B_SourceLightType
2025-09-13 09:56:49.853 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,A_SourceLightType
2025-09-13 09:56:49.898 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:49.900 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_118_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:49.947 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:49.949 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_118_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:50.117 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;118/120,
2025-09-13 09:56:50.126 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:50.169 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:50.519 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 119
2025-09-13 09:56:50.519 [Thd =46]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 119
2025-09-13 09:56:50.519 [Thd =77]  Info Default  开始扫描条带； [119/120]
2025-09-13 09:56:50.521 [Thd =46]  Info Default ScanDirection is Negative
2025-09-13 09:56:50.523 [Thd =46]  Info Default ***row:119, vectorBeginX:-16.356, vectorBeginY:-13.355, captureBeginX:-12.736, captureBeginY:-13.355, captureEndX:10.761, captureEndY:-13.355, vectorEndX:14.663, vectorEndY:-13.355
2025-09-13 09:56:50.523 [Thd =46]  Info Default m_focusMapMode：0
2025-09-13 09:56:50.524 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361375934618,EndPoint:-10.7607367792486
2025-09-13 09:56:50.718 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:50
2025-09-13 09:56:50.735 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:50
2025-09-13 09:56:51.727 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:119
2025-09-13 09:56:51.727 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:51.727 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:56:51.728 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:119
2025-09-13 09:56:51.728 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:56:51.728 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:B_SourceLightType
2025-09-13 09:56:51.728 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:A_SourceLightType
2025-09-13 09:56:51.728 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,B_SourceLightType
2025-09-13 09:56:51.728 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,A_SourceLightType
2025-09-13 09:56:51.782 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:56:51.784 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_119_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:51.835 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:56:51.836 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_119_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:56:51.994 [Thd =46]  Info Default Strip scanning complete, waiting for collection... ;119/120,
2025-09-13 09:56:52.003 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:56:52.046 [Thd =46]  Info Default singleAixsScan Testing 2
2025-09-13 09:56:52.390 [Thd =46]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 120
2025-09-13 09:56:52.391 [Thd =46]  Info Default begin--m_TaskFinish_event----------
2025-09-13 09:56:52.391 [Thd =48]  Info Default 扫描完成,等待结果处理...
2025-09-13 09:56:53.046 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:53
2025-09-13 09:56:53.096 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:53
2025-09-13 09:56:53.313 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:53
2025-09-13 09:56:53.367 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:53
2025-09-13 09:56:53.392 [Thd =46]  Info Default end--m_TaskFinish_event----------
2025-09-13 09:56:53.532 [Thd =46]  Info Default ***********Task finished.**************
2025-09-13 09:56:53.532 [Thd =46]  Info Default Stop the detection thread;
2025-09-13 09:56:53.579 [Thd =136]  Warn Default 还原光源最大功率
2025-09-13 09:56:53.579 [Thd =131]  Info Default LaserLamp MaxPower:300
2025-09-13 09:56:54.533 [Thd =172]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:56:54.584 [Thd =131]  Info Default OpenLamp Transmission
2025-09-13 09:56:55.387 [Thd =38]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:56:55.586 [Thd =131]  Info Default CloseLamp Reflection
2025-09-13 09:56:56.604 [Thd =77]  Info Default LaserLamp MaxPower:300,currentPower:180
2025-09-13 09:56:56.618 [Thd =94]  Info Default RecordCompleteStripNo begin:2025-09-13 09:56:56
2025-09-13 09:56:56.634 [Thd =94]  Info Default RecordCompleteStripNo end:2025-09-13 09:56:56
2025-09-13 09:56:56.913 [Thd =66]  Info Default 等待硬件处理中...
2025-09-13 09:56:58.287 [Thd =38]  Warn Default 已切换到面阵光路
2025-09-13 09:56:58.604 [Thd =77]  Error Default SyncSend recv cmd timeout
2025-09-13 09:56:59.160 [Thd =172]  Info Default QuerySubstrateMode Area OK 
2025-09-13 09:56:59.160 [Thd =221]  Info Default 已切换到面阵聚焦模式
2025-09-13 09:57:03.162 [Thd =172]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:57:03.162 [Thd =196]  Info Default 聚焦Track已关闭
2025-09-13 09:57:03.170 [Thd =46]  Info Default Finally Over！
2025-09-13 09:57:03.175 [Thd =46]  Info Default Inspection:End Memory usage:7447.723MB VirtualMemorySize:143.8 GB
2025-09-13 09:57:03.175 [Thd =46]  Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over!
2025-09-13 09:57:03.175 [Thd =136]  Info Default 硬件处理完成。
2025-09-13 09:57:03.175 [Thd =94]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Finished
2025-09-13 09:57:03.175 [Thd =94]  Info Default LightState 000:last:Inspecting,now:InspectComplete
2025-09-13 09:57:03.178 [Thd =94]  Info Default LightState 222:InspectComplete
2025-09-13 09:57:03.178 [Thd =94]  Info Default PLCKeyence:SetSystemStatus:WR DM0 1

2025-09-13 09:57:03.178 [Thd =94]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:57:03.179 [Thd =150]  Info Default Chuck vacuum close
2025-09-13 09:57:03.179 [Thd =196]  Info Default 结果处理全部完成！
2025-09-13 09:57:04.179 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:57:04.179 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished! CurTaskName:1980
2025-09-13 09:57:04.987 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:57:04.993 [Thd =221]  Error Default MaskDefectPanel::GenerateTxtReport(): No Defect in this report:.1980
2025-09-13 09:57:05.233 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished End! CurTaskName:1980
2025-09-13 09:57:05.258 [Thd =94]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-09-13 09:57:05.258 [Thd =94]  Info Default *********Reset2**********
2025-09-13 09:57:05.258 [Thd =38]  Info Default 检测完成！
2025-09-13 09:57:05.258 [Thd =48]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-09-13 09:57:09.675 [Thd =151]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101320,"ServiceStartTime":"2025\/9\/13 9:52:27","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:09.676 [Thd =172]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101320,"ServiceStartTime":"2025\/9\/13 9:52:18","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:12.227 [Thd =136]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101325,"ServiceStartTime":"2025\/9\/13 9:57:00","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:12.231 [Thd =131]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101325,"ServiceStartTime":"2025\/9\/13 9:57:09","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:12.274 [Thd =48]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-09-13 09:57:22.460 [Thd =1]  Info Default DefectPicID:7389fbb6-7de2-4838-a8da-c4d275668cbd
2025-09-13 09:57:22.562 [Thd =1]  Info Default DefectPicID:7389fbb6-7de2-4838-a8da-c4d275668cbd
2025-09-13 09:57:35.504 [Thd =1]  Info Default line_Wdith 2032, line_height 2048.
2025-09-13 09:57:37.318 [Thd =1]  Info Default LightState 000:last:InspectComplete,now:StormInit
2025-09-13 09:57:37.320 [Thd =1]  Info Default LightState 222:StormInit
2025-09-13 09:57:37.320 [Thd =1]  Info Default Licensed has techLevel count:2
2025-09-13 09:57:37.320 [Thd =1]  Info Default New INI File！st_core_P200_BIM.ini
2025-09-13 09:57:37.407 [Thd =38]  Info Default Start [1/1]
2025-09-13 09:57:37.408 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-09-13 09:57:37.408 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-09-13 09:57:37.412 [Thd =1]  Info Default Inspection:Before Memory usage:5181.688MB VirtualMemorySize:142.2 GB
2025-09-13 09:57:37.412 [Thd =112]  Info Default 开始检查！
2025-09-13 09:57:37.559 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:7928844,68723239 ，GDSStep:2016，stripNo:0，PixelX_line:0.212071778 
2025-09-13 09:57:37.559 [Thd =66]  Info Default 初始化插件
2025-09-13 09:57:37.559 [Thd =77]  Info Default TDICamera1:Current:TDIStage：TDI120，Target：TDI120,CurrentSize:2048,2048
2025-09-13 09:57:37.559 [Thd =77]  Info Default TDICamera1:Camera size no change,do not set
2025-09-13 09:57:37.559 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-09-13 09:57:37.560 [Thd =180]  Info Default 初始化DB目录
2025-09-13 09:57:37.560 [Thd =221]  Info Default TDICamera0:Current:TDIStage：TDI256，Target：TDI256,CurrentSize:2048,2048
2025-09-13 09:57:37.560 [Thd =221]  Info Default TDICamera0:Camera size no change,do not set
2025-09-13 09:57:37.560 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-09-13 09:57:37.560 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-09-13 09:57:37.561 [Thd =151]  Info Default 设置 TDI 相机参数...
2025-09-13 09:57:37.681 [Thd =19]  Info Default 初始化DPU服务器！
2025-09-13 09:57:37.681 [Thd =111]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-09-13 09:57:38.000 [Thd =1]  Info Default LightState 000:last:StormInit,now:StormInit
2025-09-13 09:57:39.012 [Thd =77]  Info Default TDICamera1:TriggerMode is On,do not set
2025-09-13 09:57:39.516 [Thd =221]  Info Default TDICamera0:TriggerMode is On,do not set
2025-09-13 09:57:41.232 [Thd =151]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101341,"ServiceStartTime":"2025\/9\/13 9:57:09","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:41.232 [Thd =151]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101341,"ServiceStartTime":"2025\/9\/13 9:57:00","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:43.773 [Thd =196]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101346,"ServiceStartTime":"2025\/9\/13 9:57:31","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:43.797 [Thd =48]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":101346,"ServiceStartTime":"2025\/9\/13 9:57:41","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"dpu1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130963,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10733","AlgoVersion":"1.2.8.25.3704.10813.51040"}
2025-09-13 09:57:44.196 [Thd =111]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-09-13 09:57:44.312 [Thd =1]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:57:46.459 [Thd =1]  Info Default Register inspect event！
2025-09-13 09:57:46.488 [Thd =1]  Info Default initial*****Light_intensity:40, min:10, max:220
2025-09-13 09:57:46.488 [Thd =51]  Info Default 初始化检测数据
2025-09-13 09:57:46.488 [Thd =1]  Info Default ***gds clip thread num is 6
2025-09-13 09:57:46.488 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-09-13 09:57:46.489 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 0, reference point GDS_Y: 0, reference point Stage_X: -58.0185471554495, reference point Stage_Y: 45.6395234027315, starting point GDS_X: 7928844, starting point GDS_Y: 68723239
2025-09-13 09:57:46.489 [Thd =77]  Info Default m_start_strip_no:0
2025-09-13 09:57:46.489 [Thd =77]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-09-13 09:57:46.489 [Thd =77]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":null,"m_layerMode":0,"m_layerNo":0,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212071778,"m_pixelSizeY":0.212071778,"m_pixelSizeX_Len":0.212071778,"m_pixelSizeY_Len":0.212071778,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":836,"m_col":217,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":7928844,"m_beginY":68723239,"m_endX":97280927,"m_endY":45980727,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":4,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":1263,"m_AL":1,"m_lcol":211,"m_tolerance_mode":0,"m_x_tolerance":0.0,"m_y_tolerance":0.0,"m_CD_Defect_resolution":0.5,"m_pinhole_Defect_resolution":0.5,"m_degreeThrd":44,"m_cornerThrd":0,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":null,"m_bUseDP":false,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":209,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-09-13\\rcp_SL_1/","m_line_camera_ud_offset":-1,"m_line_camera_lr_offset":2,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-09-13\\rcp_SL_1/","m_optical_head_total":0,"m_inner_round":0.0,"m_optical_head_id":0,"m_outer_round":0.0,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":0.0,"m_CD2_Defect_resolution":0.5,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,214,4,0,1130102784,1065353216,1065353216,6,40,0],"m_R_collect":[200,202,44,0,1128792064,1065353216,1065353216,10752,2,1094713344],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":1,"m_line_camera_ud_offset_f":-1.45,"m_mask_inspection_mode_ex":4,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":1,"m_Edge_2_thrd_mode":1,"m_Gray_thrd_mode":1,"m_line_camera_lr_offset_f":2.05,"SL_Edge_switch":3,"SL_Edge2_switch":3,"crDrop_switch":3,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":0.0,"m_y_tolerance_R":0.0,"m_inner_round_R":0.0,"m_outer_round_R":0.0,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-0.65,"lr_decimal_right":1.3,"m_simple_gray_defect_kernel":0,"m_cs_pitchs":null,"m_OPCplate":false,"m_dilation_value":2.5}
2025-09-13 09:57:46.490 [Thd =77]  Info Default m_line_camera_cols:53
2025-09-13 09:57:46.490 [Thd =77]  Info Default AllocHGlobal img mem pic_count:53, img_w:2032, img_h:2048
2025-09-13 09:57:46.490 [Thd =77]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:SLMODE
2025-09-13 09:57:46.493 [Thd =77]  Info Default Set distortion correction parameters End
2025-09-13 09:57:46.493 [Thd =77]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):836,pic_count(Grid2.Cols):211,pic_count_pack(Grid.Cols):217,max_batch:20,mode:4,m_channel:4 
2025-09-13 09:57:46.603 [Thd =77]  Info Default InitDie2DBRes Success!!!!
2025-09-13 09:57:46.604 [Thd =1]  Info Default Successful alignment！
2025-09-13 09:57:46.604 [Thd =38]  Info Default 对准完成！
2025-09-13 09:57:46.604 [Thd =89]  Info Default 稍等！设置相机参数中
2025-09-13 09:57:46.604 [Thd =1]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:57:46.604 [Thd =151]  Info Default 移动到起始点位
2025-09-13 09:57:47.605 [Thd =1]  Info Default Move to the inspect start point，Starting point coordinates：X:10.7046918445505,Y:37.7106794027315,OffSet.X:0,OffSet.Y:0
2025-09-13 09:57:47.605 [Thd =136]  Warn Default 标记偏移点X:0，Y:0
2025-09-13 09:57:49.727 [Thd =77]  Info Default Zposition:0
2025-09-13 09:57:52.555 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Running
2025-09-13 09:57:52.555 [Thd =1]  Info Default LightState 000:last:StormInit,now:Inspecting
2025-09-13 09:57:52.606 [Thd =1]  Info Default LightState 222:Inspecting
2025-09-13 09:57:52.606 [Thd =1]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:57:52.607 [Thd =1]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:57:52.607 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() Running ! 
2025-09-13 09:57:52.607 [Thd =1]  Info Default AutoWorderHelper:StartWorker.
2025-09-13 09:57:52.607 [Thd =1]  Info Default AutoWorderHelper:SaveTask2DB.
2025-09-13 09:57:52.775 [Thd =1]  Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 1981
2025-09-13 09:57:52.775 [Thd =1]  Info Default AutoWorderHelper:InitInspectingData.
2025-09-13 09:57:52.775 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0
2025-09-13 09:57:52.776 [Thd =94]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Running
2025-09-13 09:57:52.776 [Thd =94]  Info Default LightState 000:last:Inspecting,now:Inspecting
2025-09-13 09:57:52.776 [Thd =94]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:57:52.776 [Thd =150]  Info Default 检测线程启动！
2025-09-13 09:57:52.776 [Thd =180]  Info Default 结果处理线程启动！
2025-09-13 09:57:52.776 [Thd =94]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:57:52.777 [Thd =94]  Info Default defectData.RecivePicCount:0
2025-09-13 09:57:52.777 [Thd =94]  Info Default start inspect task pic_count of one strip:53, big_strip_count:209. 
2025-09-13 09:57:52.777 [Thd =94]  Info Default m_StagePixelSizeX=0.212071778， m_StagePixelSizeY=0.212071778.
2025-09-13 09:57:52.777 [Thd =94]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-09-13 09:57:52.777 [Thd =94]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-09-13 09:57:52.777 [Thd =94]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-09-13 09:57:52.777 [Thd =94]  Info Default BaseScanObjectLine:------------------
2025-09-13 09:57:52.777 [Thd =94]  Info Default BaseScanObjectLine:*****************
2025-09-13 09:57:52.777 [Thd =94]  Info Default BaseScanObjectLine:0000000000000000
2025-09-13 09:57:52.777 [Thd =94]  Info Default scaleX: 0.999968571, scaleY:1
2025-09-13 09:57:52.777 [Thd =94]  Info Default Orth_Y_BeforR: 0,StageScaleX:0.999968571,Y:1
2025-09-13 09:57:52.777 [Thd =94]  Info Default LengthOfAccelerationAndDeceleration: 4
2025-09-13 09:57:52.781 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:1981
2025-09-13 09:57:52.781 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:1981
2025-09-13 09:57:56.779 [Thd =94]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:57:56.779 [Thd =36]  Info Default 聚焦Track已关闭
2025-09-13 09:57:56.779 [Thd =221]  Info Default 正在切换线阵相机光路
2025-09-13 09:58:01.487 [Thd =94]  Info Default ChangeLightPath: True!
2025-09-13 09:58:01.487 [Thd =94]  Info Default SnakeScanLine: Paddle Rotate angle is 0 !
2025-09-13 09:58:03.309 [Thd =94]  Info Default InspectOverlayX: 16, InspectOverlayY:16
2025-09-13 09:58:03.315 [Thd =180]  Warn Default 检测光源最大功率(mw):300mw
2025-09-13 09:58:03.315 [Thd =94]  Info Default SetMaxPower:300
2025-09-13 09:58:04.315 [Thd =151]  Info Default 正在打开透射、反射光源，亮度 40%
2025-09-13 09:58:04.315 [Thd =94]  Info Default OpenLamp Transmission
2025-09-13 09:58:05.117 [Thd =180]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:58:05.317 [Thd =94]  Info Default OpenLamp Reflection
2025-09-13 09:58:06.351 [Thd =196]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-09-13 09:58:07.121 [Thd =94]  Info Default PolarizationBaffleControl False: 2!
2025-09-13 09:58:07.121 [Thd =150]  Info Default 正在启用实时聚焦
2025-09-13 09:58:07.140 [Thd =94]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:58:08.352 [Thd =196]  Error Default SyncSend recv cmd timeout
2025-09-13 09:58:09.644 [Thd =94]  Info Default QuerySubstrateMode Line OK 
2025-09-13 09:58:09.644 [Thd =36]  Info Default 已切换到线阵聚焦模式
2025-09-13 09:58:10.646 [Thd =150]  Info Default 正在设置扫描控制参数
2025-09-13 09:58:10.646 [Thd =94]  Info Default GetParameter: stepCompX is 0.000212071778
2025-09-13 09:58:11.540 [Thd =94]  Info Default Allocate resources!
2025-09-13 09:58:11.540 [Thd =94]  Info Default GPU num is 1!
2025-09-13 09:58:15.542 [Thd =94]  Info Default SetFocusTrack OpenTrack OK 
2025-09-13 09:58:15.542 [Thd =221]  Info Default 聚焦Track已开启
2025-09-13 09:58:15.542 [Thd =94]  Info Default Start scanning; Start strip number: 0, total strip number: 209
2025-09-13 09:58:15.542 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 0
2025-09-13 09:58:15.542 [Thd =221]  Info Default  开始扫描条带； [0/209]
2025-09-13 09:58:15.544 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:15.546 [Thd =94]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:37.52301, CaptureEndX:-12.39935, CaptureEndY:37.52301, VectorBeginX:14.66320, VectorBeginY:37.52301, VectorEndX:-16.35592, VectorEndY:37.52301, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:15.546 [Thd =94]  Info Default ***row:0, vectorBeginX:14.663, vectorBeginY:37.523, captureBeginX:11.098, captureBeginY:37.523, captureEndX:-12.399, captureEndY:37.523, vectorEndX:-16.356, vectorEndY:37.523
2025-09-13 09:58:15.546 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:15.547 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975264208086,EndPoint:12.3993479519018
2025-09-13 09:58:16.748 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:0
2025-09-13 09:58:16.748 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:16.748 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:16.748 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:0
2025-09-13 09:58:16.749 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:16.749 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:B_SourceLightType
2025-09-13 09:58:16.749 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:A_SourceLightType
2025-09-13 09:58:16.749 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,B_SourceLightType
2025-09-13 09:58:16.749 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,A_SourceLightType
2025-09-13 09:58:16.796 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:16.817 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_0_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:16.863 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:16.866 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_0_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:17.013 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;0/209,
2025-09-13 09:58:17.023 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:17.085 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:17.433 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 1
2025-09-13 09:58:17.433 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 1
2025-09-13 09:58:17.433 [Thd =89]  Info Default  开始扫描条带； [1/209]
2025-09-13 09:58:17.438 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:17.441 [Thd =94]  Info Default ***row:1, vectorBeginX:-16.356, vectorBeginY:37.095, captureBeginX:-12.736, captureBeginY:37.095, captureEndX:10.761, captureEndY:37.095, vectorEndX:14.663, vectorEndY:37.095
2025-09-13 09:58:17.441 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:17.442 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361604816454,EndPoint:-10.760713891065
2025-09-13 09:58:18.644 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:1
2025-09-13 09:58:18.644 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:18.644 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:18.645 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:1
2025-09-13 09:58:18.645 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:18.645 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:A_SourceLightType
2025-09-13 09:58:18.645 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:B_SourceLightType
2025-09-13 09:58:18.645 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,A_SourceLightType
2025-09-13 09:58:18.645 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,B_SourceLightType
2025-09-13 09:58:18.695 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:18.716 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_1_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:18.764 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:18.766 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_1_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:18.908 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;1/209,
2025-09-13 09:58:18.917 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:18.959 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:19.310 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 2
2025-09-13 09:58:19.310 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 2
2025-09-13 09:58:19.310 [Thd =111]  Info Default  开始扫描条带； [2/209]
2025-09-13 09:58:19.312 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:19.315 [Thd =94]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:36.66792, CaptureEndX:-12.39935, CaptureEndY:36.66792, VectorBeginX:14.66320, VectorBeginY:36.66792, VectorEndX:-16.35592, VectorEndY:36.66792, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:19.315 [Thd =94]  Info Default ***row:2, vectorBeginX:14.663, vectorBeginY:36.668, captureBeginX:11.098, captureBeginY:36.668, captureEndX:-12.399, captureEndY:36.668, vectorEndX:-16.356, vectorEndY:36.668
2025-09-13 09:58:19.315 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:19.316 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097522270389,EndPoint:12.3993521023214
2025-09-13 09:58:20.518 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:2
2025-09-13 09:58:20.518 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:20.518 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:20.518 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:2
2025-09-13 09:58:20.518 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:20.518 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:A_SourceLightType
2025-09-13 09:58:20.518 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:B_SourceLightType
2025-09-13 09:58:20.518 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,A_SourceLightType
2025-09-13 09:58:20.518 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,B_SourceLightType
2025-09-13 09:58:20.566 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:20.568 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_2_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:20.618 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:20.619 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_2_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:20.785 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;2/209,
2025-09-13 09:58:20.794 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:20.808 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:20
2025-09-13 09:58:20.824 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:20
2025-09-13 09:58:20.854 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:21.204 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 3
2025-09-13 09:58:21.204 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 3
2025-09-13 09:58:21.204 [Thd =221]  Info Default  开始扫描条带； [3/209]
2025-09-13 09:58:21.206 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:21.208 [Thd =94]  Info Default ***row:3, vectorBeginX:-16.356, vectorBeginY:36.240, captureBeginX:-12.736, captureBeginY:36.240, captureEndX:10.761, captureEndY:36.240, vectorEndX:14.663, vectorEndY:36.240
2025-09-13 09:58:21.208 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:21.209 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361676227587,EndPoint:-10.7607067499517
2025-09-13 09:58:22.411 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:3
2025-09-13 09:58:22.411 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:22.411 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:22.412 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:3
2025-09-13 09:58:22.412 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:22.412 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:A_SourceLightType
2025-09-13 09:58:22.412 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:B_SourceLightType
2025-09-13 09:58:22.412 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,A_SourceLightType
2025-09-13 09:58:22.412 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,B_SourceLightType
2025-09-13 09:58:22.459 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:22.461 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_3_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:22.511 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:22.513 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_3_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:22.680 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;3/209,
2025-09-13 09:58:22.689 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:22.792 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:23.141 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 4
2025-09-13 09:58:23.141 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 4
2025-09-13 09:58:23.141 [Thd =196]  Info Default  开始扫描条带； [4/209]
2025-09-13 09:58:23.143 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:23.146 [Thd =94]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:35.81282, CaptureEndX:-12.39935, CaptureEndY:35.81282, VectorBeginX:14.66320, VectorBeginY:35.81282, VectorEndX:-16.35592, VectorEndY:35.81282, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:23.146 [Thd =94]  Info Default ***row:4, vectorBeginX:14.663, vectorBeginY:35.813, captureBeginX:11.098, captureBeginY:35.813, captureEndX:-12.399, captureEndY:35.813, vectorEndX:-16.356, vectorEndY:35.813
2025-09-13 09:58:23.146 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:23.147 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975199509638,EndPoint:12.3993544217466
2025-09-13 09:58:24.346 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:4
2025-09-13 09:58:24.346 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:24.346 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:24.348 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:4
2025-09-13 09:58:24.348 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:24.348 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:A_SourceLightType
2025-09-13 09:58:24.348 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:B_SourceLightType
2025-09-13 09:58:24.348 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,A_SourceLightType
2025-09-13 09:58:24.348 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,B_SourceLightType
2025-09-13 09:58:24.396 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:24.399 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_4_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:24.449 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:24.450 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_4_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:24.615 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;4/209,
2025-09-13 09:58:24.623 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:24.673 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:25.024 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 5
2025-09-13 09:58:25.024 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 5
2025-09-13 09:58:25.024 [Thd =66]  Info Default  开始扫描条带； [5/209]
2025-09-13 09:58:25.026 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:25.028 [Thd =94]  Info Default ***row:5, vectorBeginX:-16.356, vectorBeginY:35.385, captureBeginX:-12.736, captureBeginY:35.385, captureEndX:10.761, captureEndY:35.385, vectorEndX:14.663, vectorEndY:35.385
2025-09-13 09:58:25.028 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:25.029 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361693317431,EndPoint:-10.7607050409673
2025-09-13 09:58:25.333 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:25
2025-09-13 09:58:25.351 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:25
2025-09-13 09:58:25.352 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:25
2025-09-13 09:58:25.368 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:25
2025-09-13 09:58:25.869 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:25
2025-09-13 09:58:25.887 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:25
2025-09-13 09:58:26.234 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:5
2025-09-13 09:58:26.234 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:26.234 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:26.235 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:5
2025-09-13 09:58:26.235 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:26.235 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:A_SourceLightType
2025-09-13 09:58:26.235 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:B_SourceLightType
2025-09-13 09:58:26.235 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,A_SourceLightType
2025-09-13 09:58:26.235 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,B_SourceLightType
2025-09-13 09:58:26.283 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:26.285 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_5_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:26.331 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:26.335 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_5_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:26.494 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;5/209,
2025-09-13 09:58:26.502 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:26.570 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:26.920 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 6
2025-09-13 09:58:26.920 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 6
2025-09-13 09:58:26.920 [Thd =136]  Info Default  开始扫描条带； [6/209]
2025-09-13 09:58:26.922 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:26.924 [Thd =94]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:34.95773, CaptureEndX:-12.39936, CaptureEndY:34.95773, VectorBeginX:14.66320, VectorBeginY:34.95773, VectorEndX:-16.35592, VectorEndY:34.95773, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:26.924 [Thd =94]  Info Default ***row:6, vectorBeginX:14.663, vectorBeginY:34.958, captureBeginX:11.098, captureBeginY:34.958, captureEndX:-12.399, captureEndY:34.958, vectorEndX:-16.356, vectorEndY:34.958
2025-09-13 09:58:26.924 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:26.926 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.097518608169,EndPoint:12.3993557645414
2025-09-13 09:58:28.126 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:6
2025-09-13 09:58:28.127 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:28.127 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:28.127 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:6
2025-09-13 09:58:28.128 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:28.128 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:A_SourceLightType
2025-09-13 09:58:28.128 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,A_SourceLightType
2025-09-13 09:58:28.128 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:B_SourceLightType
2025-09-13 09:58:28.128 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,B_SourceLightType
2025-09-13 09:58:28.177 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:28.179 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_6_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:28.228 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:28.230 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_6_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:28.391 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;6/209,
2025-09-13 09:58:28.400 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:28.503 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:28.852 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 7
2025-09-13 09:58:28.852 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 7
2025-09-13 09:58:28.852 [Thd =136]  Info Default  开始扫描条带； [7/209]
2025-09-13 09:58:28.854 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:28.856 [Thd =94]  Info Default ***row:7, vectorBeginX:-16.356, vectorBeginY:34.530, captureBeginX:-12.736, captureBeginY:34.530, captureEndX:10.761, captureEndY:34.530, vectorEndX:14.663, vectorEndY:34.530
2025-09-13 09:58:28.856 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:28.857 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361659137743,EndPoint:-10.7607084589361
2025-09-13 09:58:29.393 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:29
2025-09-13 09:58:29.418 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:29
2025-09-13 09:58:30.060 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:7
2025-09-13 09:58:30.060 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:30.060 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:30.061 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:7
2025-09-13 09:58:30.061 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:30.061 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:B_SourceLightType
2025-09-13 09:58:30.061 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,B_SourceLightType
2025-09-13 09:58:30.061 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,A_SourceLightType
2025-09-13 09:58:30.061 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:A_SourceLightType
2025-09-13 09:58:30.110 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:30.111 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_7_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:30.159 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:30.161 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_7_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:30.323 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;7/209,
2025-09-13 09:58:30.332 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:30.497 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:30.837 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 8
2025-09-13 09:58:30.837 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 8
2025-09-13 09:58:30.837 [Thd =180]  Info Default  开始扫描条带； [8/209]
2025-09-13 09:58:30.839 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:30.842 [Thd =94]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:34.10263, CaptureEndX:-12.39935, CaptureEndY:34.10263, VectorBeginX:14.66320, VectorBeginY:34.10263, VectorEndX:-16.35592, VectorEndY:34.10263, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:30.842 [Thd =94]  Info Default ***row:8, vectorBeginX:14.663, vectorBeginY:34.103, captureBeginX:11.098, captureBeginY:34.103, captureEndX:-12.399, captureEndY:34.103, vectorEndX:-16.356, vectorEndY:34.103
2025-09-13 09:58:30.842 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:30.844 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975219651453,EndPoint:12.3993524075651
2025-09-13 09:58:31.056 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:31
2025-09-13 09:58:31.106 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:31
2025-09-13 09:58:32.044 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:8
2025-09-13 09:58:32.044 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:32.044 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:32.045 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:8
2025-09-13 09:58:32.045 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:32.045 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:A_SourceLightType
2025-09-13 09:58:32.045 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,A_SourceLightType
2025-09-13 09:58:32.045 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:B_SourceLightType
2025-09-13 09:58:32.045 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,B_SourceLightType
2025-09-13 09:58:32.092 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:32.094 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_8_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:32.144 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:32.147 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_8_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:32.313 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;8/209,
2025-09-13 09:58:32.322 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:32.384 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:32.736 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 9
2025-09-13 09:58:32.736 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 9
2025-09-13 09:58:32.736 [Thd =221]  Info Default  开始扫描条带； [9/209]
2025-09-13 09:58:32.738 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:32.741 [Thd =94]  Info Default ***row:9, vectorBeginX:-16.356, vectorBeginY:33.675, captureBeginX:-12.736, captureBeginY:33.675, captureEndX:10.761, captureEndY:33.675, vectorEndX:14.663, vectorEndY:33.675
2025-09-13 09:58:32.741 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:32.742 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736162678911,EndPoint:-10.7607116937994
2025-09-13 09:58:32.915 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:32
2025-09-13 09:58:33.001 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:33
2025-09-13 09:58:33.944 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:9
2025-09-13 09:58:33.944 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:33.944 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:33.945 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:9
2025-09-13 09:58:33.945 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:33.945 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:B_SourceLightType
2025-09-13 09:58:33.945 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:A_SourceLightType
2025-09-13 09:58:33.945 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,B_SourceLightType
2025-09-13 09:58:33.945 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,A_SourceLightType
2025-09-13 09:58:33.991 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:33.993 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_9_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:34.037 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:34.040 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_9_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:34.131 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:34
2025-09-13 09:58:34.190 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:34
2025-09-13 09:58:34.211 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;9/209,
2025-09-13 09:58:34.220 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:34.308 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:34.660 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 10
2025-09-13 09:58:34.660 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 10
2025-09-13 09:58:34.660 [Thd =66]  Info Default  开始扫描条带； [10/209]
2025-09-13 09:58:34.662 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:34.664 [Thd =94]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:33.24753, CaptureEndX:-12.39935, CaptureEndY:33.24753, VectorBeginX:14.66320, VectorBeginY:33.24753, VectorEndX:-16.35592, VectorEndY:33.24753, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:34.664 [Thd =94]  Info Default ***row:10, vectorBeginX:14.663, vectorBeginY:33.248, captureBeginX:11.098, captureBeginY:33.248, captureEndX:-12.399, captureEndY:33.248, vectorEndX:-16.356, vectorEndY:33.248
2025-09-13 09:58:34.664 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:34.665 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975239793459,EndPoint:12.3993503933645
2025-09-13 09:58:35.865 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:10
2025-09-13 09:58:35.865 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:35.865 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:35.866 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:10
2025-09-13 09:58:35.866 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:35.867 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:B_SourceLightType
2025-09-13 09:58:35.867 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:A_SourceLightType
2025-09-13 09:58:35.867 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,B_SourceLightType
2025-09-13 09:58:35.867 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,A_SourceLightType
2025-09-13 09:58:35.913 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:35.915 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_10_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:35.959 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:35.961 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_10_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:36.131 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;10/209,
2025-09-13 09:58:36.140 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:36.194 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:36
2025-09-13 09:58:36.254 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:36.290 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:36
2025-09-13 09:58:36.602 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 11
2025-09-13 09:58:36.602 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 11
2025-09-13 09:58:36.602 [Thd =150]  Info Default  开始扫描条带； [11/209]
2025-09-13 09:58:36.604 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:36.607 [Thd =94]  Info Default ***row:11, vectorBeginX:-16.356, vectorBeginY:32.820, captureBeginX:-12.736, captureBeginY:32.820, captureEndX:10.761, captureEndY:32.820, vectorEndX:14.663, vectorEndY:32.820
2025-09-13 09:58:36.607 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:36.608 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361617633837,EndPoint:-10.7607126093267
2025-09-13 09:58:36.791 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:36
2025-09-13 09:58:36.814 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:36
2025-09-13 09:58:37.810 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:11
2025-09-13 09:58:37.810 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:37.810 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:37.811 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:11
2025-09-13 09:58:37.811 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:37.811 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:B_SourceLightType
2025-09-13 09:58:37.811 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:A_SourceLightType
2025-09-13 09:58:37.811 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,B_SourceLightType
2025-09-13 09:58:37.811 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,A_SourceLightType
2025-09-13 09:58:37.856 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:37.858 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_11_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:37.900 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:37.902 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_11_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:38.082 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;11/209,
2025-09-13 09:58:38.091 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:38.170 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:38.521 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 12
2025-09-13 09:58:38.521 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 12
2025-09-13 09:58:38.521 [Thd =221]  Info Default  开始扫描条带； [12/209]
2025-09-13 09:58:38.523 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:38.525 [Thd =94]  Info Default CaptureBeginX: 11.09752, CaptureBeginY:32.39244, CaptureEndX:-12.39935, CaptureEndY:32.39244, VectorBeginX:14.66320, VectorBeginY:32.39244, VectorEndX:-16.35592, VectorEndY:32.39244, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:38.525 [Thd =94]  Info Default ***row:12, vectorBeginX:14.663, vectorBeginY:32.392, captureBeginX:11.098, captureBeginY:32.392, captureEndX:-12.399, captureEndY:32.392, vectorEndX:-16.356, vectorEndY:32.392
2025-09-13 09:58:38.525 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:38.527 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975239793574,EndPoint:12.399350393353
2025-09-13 09:58:38.556 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:38
2025-09-13 09:58:38.580 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:38
2025-09-13 09:58:39.726 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:12
2025-09-13 09:58:39.727 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:39.727 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:39.727 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:12
2025-09-13 09:58:39.728 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:39.728 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:B_SourceLightType
2025-09-13 09:58:39.728 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:A_SourceLightType
2025-09-13 09:58:39.728 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,B_SourceLightType
2025-09-13 09:58:39.728 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,A_SourceLightType
2025-09-13 09:58:39.777 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:39.779 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_12_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:39.819 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:39.821 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_12_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:39.992 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;12/209,
2025-09-13 09:58:40.001 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:40.043 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:40.394 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 13
2025-09-13 09:58:40.394 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 13
2025-09-13 09:58:40.394 [Thd =136]  Info Default  开始扫描条带； [13/209]
2025-09-13 09:58:40.396 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:40.398 [Thd =94]  Info Default ***row:13, vectorBeginX:-16.356, vectorBeginY:31.965, captureBeginX:-12.736, captureBeginY:31.965, captureEndX:10.761, captureEndY:31.965, vectorEndX:14.663, vectorEndY:31.965
2025-09-13 09:58:40.399 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:40.400 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736158772661,EndPoint:-10.7607156000494
2025-09-13 09:58:40.584 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:40
2025-09-13 09:58:40.601 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:40
2025-09-13 09:58:41.601 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:13
2025-09-13 09:58:41.601 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:41.601 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:41.603 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:13
2025-09-13 09:58:41.603 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:41.603 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:B_SourceLightType
2025-09-13 09:58:41.603 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:A_SourceLightType
2025-09-13 09:58:41.603 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,B_SourceLightType
2025-09-13 09:58:41.603 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,A_SourceLightType
2025-09-13 09:58:41.652 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:41.654 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_13_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:41.704 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:41.706 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_13_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:41.868 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;13/209,
2025-09-13 09:58:41.877 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:42.117 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:42.470 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 14
2025-09-13 09:58:42.471 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 14
2025-09-13 09:58:42.471 [Thd =180]  Info Default  开始扫描条带； [14/209]
2025-09-13 09:58:42.473 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:42.476 [Thd =94]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:31.53735, CaptureEndX:-12.39935, CaptureEndY:31.53735, VectorBeginX:14.66321, VectorBeginY:31.53735, VectorEndX:-16.35591, VectorEndY:31.53735, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:42.476 [Thd =94]  Info Default ***row:14, vectorBeginX:14.663, vectorBeginY:31.537, captureBeginX:11.098, captureBeginY:31.537, captureEndX:-12.399, captureEndY:31.537, vectorEndX:-16.356, vectorEndY:31.537
2025-09-13 09:58:42.476 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:42.477 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975293504885,EndPoint:12.3993450222219
2025-09-13 09:58:42.757 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:42
2025-09-13 09:58:42.808 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:42
2025-09-13 09:58:43.678 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:14
2025-09-13 09:58:43.678 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:43.678 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:43.678 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:14
2025-09-13 09:58:43.678 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:43.678 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:A_SourceLightType
2025-09-13 09:58:43.678 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:B_SourceLightType
2025-09-13 09:58:43.678 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,A_SourceLightType
2025-09-13 09:58:43.678 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,B_SourceLightType
2025-09-13 09:58:43.725 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:43.727 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_14_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:43.767 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:43.769 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_14_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:43.945 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;14/209,
2025-09-13 09:58:43.954 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:44.174 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:44.523 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 15
2025-09-13 09:58:44.523 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 15
2025-09-13 09:58:44.523 [Thd =51]  Info Default  开始扫描条带； [15/209]
2025-09-13 09:58:44.525 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:44.527 [Thd =94]  Info Default ***row:15, vectorBeginX:-16.356, vectorBeginY:31.110, captureBeginX:-12.736, captureBeginY:31.110, captureEndX:10.761, captureEndY:31.110, vectorEndX:14.663, vectorEndY:31.110
2025-09-13 09:58:44.527 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:44.529 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361560871142,EndPoint:-10.7607182855962
2025-09-13 09:58:44.993 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:44
2025-09-13 09:58:45.010 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:45
2025-09-13 09:58:45.729 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:15
2025-09-13 09:58:45.729 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:45.729 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:45.730 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:15
2025-09-13 09:58:45.730 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:45.731 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:B_SourceLightType
2025-09-13 09:58:45.731 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:A_SourceLightType
2025-09-13 09:58:45.731 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,B_SourceLightType
2025-09-13 09:58:45.731 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,A_SourceLightType
2025-09-13 09:58:45.778 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:45.780 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_15_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:45.827 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:45.829 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_15_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:45.995 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;15/209,
2025-09-13 09:58:46.004 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:46.054 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:46.402 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 16
2025-09-13 09:58:46.402 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 16
2025-09-13 09:58:46.402 [Thd =89]  Info Default  开始扫描条带； [16/209]
2025-09-13 09:58:46.404 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:46.406 [Thd =94]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:30.68226, CaptureEndX:-12.39934, CaptureEndY:30.68226, VectorBeginX:14.66321, VectorBeginY:30.68226, VectorEndX:-16.35591, VectorEndY:30.68226, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:46.406 [Thd =94]  Info Default ***row:16, vectorBeginX:14.663, vectorBeginY:30.682, captureBeginX:11.098, captureBeginY:30.682, captureEndX:-12.399, captureEndY:30.682, vectorEndX:-16.356, vectorEndY:30.682
2025-09-13 09:58:46.406 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:46.407 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975303270846,EndPoint:12.3993440456258
2025-09-13 09:58:47.609 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:16
2025-09-13 09:58:47.609 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:47.609 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:47.609 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:16
2025-09-13 09:58:47.609 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:47.609 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:A_SourceLightType
2025-09-13 09:58:47.609 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:B_SourceLightType
2025-09-13 09:58:47.609 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,A_SourceLightType
2025-09-13 09:58:47.609 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,B_SourceLightType
2025-09-13 09:58:47.657 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:47.659 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_16_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:47.709 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:47.710 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_16_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:47.877 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;16/209,
2025-09-13 09:58:47.886 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:47.965 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:48.306 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 17
2025-09-13 09:58:48.306 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 17
2025-09-13 09:58:48.306 [Thd =111]  Info Default  开始扫描条带； [17/209]
2025-09-13 09:58:48.308 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:48.311 [Thd =94]  Info Default ***row:17, vectorBeginX:-16.356, vectorBeginY:30.255, captureBeginX:-12.736, captureBeginY:30.255, captureEndX:10.761, captureEndY:30.255, vectorEndX:14.663, vectorEndY:30.255
2025-09-13 09:58:48.311 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:48.312 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361596271532,EndPoint:-10.7607147455572
2025-09-13 09:58:48.460 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:48
2025-09-13 09:58:48.506 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:48
2025-09-13 09:58:48.933 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:48
2025-09-13 09:58:48.981 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:48
2025-09-13 09:58:49.523 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:17
2025-09-13 09:58:49.523 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:49.523 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:49.533 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:17
2025-09-13 09:58:49.533 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:49.533 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:B_SourceLightType
2025-09-13 09:58:49.533 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:A_SourceLightType
2025-09-13 09:58:49.533 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,B_SourceLightType
2025-09-13 09:58:49.534 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,A_SourceLightType
2025-09-13 09:58:49.589 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:49.592 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_17_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:49.638 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:49.640 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_17_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:49.778 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;17/209,
2025-09-13 09:58:49.787 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:49.828 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:50.177 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 18
2025-09-13 09:58:50.177 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 18
2025-09-13 09:58:50.177 [Thd =48]  Info Default  开始扫描条带； [18/209]
2025-09-13 09:58:50.179 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:50.181 [Thd =94]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:29.82716, CaptureEndX:-12.39935, CaptureEndY:29.82716, VectorBeginX:14.66321, VectorBeginY:29.82716, VectorEndX:-16.35591, VectorEndY:29.82716, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:50.181 [Thd =94]  Info Default ***row:18, vectorBeginX:14.663, vectorBeginY:29.827, captureBeginX:11.098, captureBeginY:29.827, captureEndX:-12.399, captureEndY:29.827, vectorEndX:-16.356, vectorEndY:29.827
2025-09-13 09:58:50.181 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:50.183 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975292284075,EndPoint:12.3993451443029
2025-09-13 09:58:51.382 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:18
2025-09-13 09:58:51.382 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:51.382 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:51.384 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:18
2025-09-13 09:58:51.384 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:51.384 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:B_SourceLightType
2025-09-13 09:58:51.384 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:A_SourceLightType
2025-09-13 09:58:51.384 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,B_SourceLightType
2025-09-13 09:58:51.385 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,A_SourceLightType
2025-09-13 09:58:51.434 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:51.436 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_18_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:51.493 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:51.495 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_18_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:51.657 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;18/209,
2025-09-13 09:58:51.666 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:51.777 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:52.126 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 19
2025-09-13 09:58:52.126 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 19
2025-09-13 09:58:52.126 [Thd =36]  Info Default  开始扫描条带； [19/209]
2025-09-13 09:58:52.129 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:52.131 [Thd =94]  Info Default ***row:19, vectorBeginX:-16.356, vectorBeginY:29.400, captureBeginX:-12.736, captureBeginY:29.400, captureEndX:10.761, captureEndY:29.400, vectorEndX:14.663, vectorEndY:29.400
2025-09-13 09:58:52.131 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:52.132 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361541950243,EndPoint:-10.7607201776861
2025-09-13 09:58:52.518 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:52
2025-09-13 09:58:52.567 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:52
2025-09-13 09:58:52.568 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:52
2025-09-13 09:58:52.605 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:52
2025-09-13 09:58:53.334 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:19
2025-09-13 09:58:53.334 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:53.334 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:53.335 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:19
2025-09-13 09:58:53.335 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:53.335 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:B_SourceLightType
2025-09-13 09:58:53.335 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:A_SourceLightType
2025-09-13 09:58:53.335 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,B_SourceLightType
2025-09-13 09:58:53.335 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,A_SourceLightType
2025-09-13 09:58:53.385 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:53.386 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_19_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:53.437 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:53.439 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_19_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:53.599 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;19/209,
2025-09-13 09:58:53.608 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:53.650 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:54.000 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 20
2025-09-13 09:58:54.000 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 20
2025-09-13 09:58:54.000 [Thd =221]  Info Default  开始扫描条带； [20/209]
2025-09-13 09:58:54.002 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:54.004 [Thd =94]  Info Default CaptureBeginX: 11.09753, CaptureBeginY:28.97206, CaptureEndX:-12.39934, CaptureEndY:28.97206, VectorBeginX:14.66321, VectorBeginY:28.97206, VectorEndX:-16.35591, VectorEndY:28.97206, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:54.004 [Thd =94]  Info Default ***row:20, vectorBeginX:14.663, vectorBeginY:28.972, captureBeginX:11.098, captureBeginY:28.972, captureEndX:-12.399, captureEndY:28.972, vectorEndX:-16.356, vectorEndY:28.972
2025-09-13 09:58:54.004 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:54.006 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975330736902,EndPoint:12.3993412990202
2025-09-13 09:58:55.208 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:20
2025-09-13 09:58:55.208 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:55.208 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:55.209 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:20
2025-09-13 09:58:55.209 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:55.209 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:B_SourceLightType
2025-09-13 09:58:55.209 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:A_SourceLightType
2025-09-13 09:58:55.210 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,B_SourceLightType
2025-09-13 09:58:55.210 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,A_SourceLightType
2025-09-13 09:58:55.217 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:55
2025-09-13 09:58:55.243 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:55
2025-09-13 09:58:55.263 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:55.265 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_20_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:55.319 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:55.321 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_20_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:55.471 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;20/209,
2025-09-13 09:58:55.481 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:55.544 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:55.894 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 21
2025-09-13 09:58:55.894 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 21
2025-09-13 09:58:55.894 [Thd =112]  Info Default  开始扫描条带； [21/209]
2025-09-13 09:58:55.897 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:55.899 [Thd =94]  Info Default ***row:21, vectorBeginX:-16.356, vectorBeginY:28.545, captureBeginX:-12.736, captureBeginY:28.545, captureEndX:10.761, captureEndY:28.545, vectorEndX:14.663, vectorEndY:28.545
2025-09-13 09:58:55.899 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:55.901 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736152119829,EndPoint:-10.7607222528814
2025-09-13 09:58:56.927 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:56
2025-09-13 09:58:56.954 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:56
2025-09-13 09:58:57.103 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:21
2025-09-13 09:58:57.103 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:57.103 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:57.104 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:21
2025-09-13 09:58:57.104 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:57.104 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:B_SourceLightType
2025-09-13 09:58:57.104 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:A_SourceLightType
2025-09-13 09:58:57.104 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,B_SourceLightType
2025-09-13 09:58:57.104 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,A_SourceLightType
2025-09-13 09:58:57.154 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:57.155 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_21_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:57.206 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:57.208 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_21_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:57.369 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;21/209,
2025-09-13 09:58:57.378 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:57.420 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:57.767 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:57
2025-09-13 09:58:57.770 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 22
2025-09-13 09:58:57.770 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 22
2025-09-13 09:58:57.770 [Thd =180]  Info Default  开始扫描条带； [22/209]
2025-09-13 09:58:57.772 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:58:57.775 [Thd =94]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:28.11696, CaptureEndX:-12.39934, CaptureEndY:28.11696, VectorBeginX:14.66322, VectorBeginY:28.11696, VectorEndX:-16.35590, VectorEndY:28.11696, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:58:57.775 [Thd =94]  Info Default ***row:22, vectorBeginX:14.663, vectorBeginY:28.117, captureBeginX:11.098, captureBeginY:28.117, captureEndX:-12.399, captureEndY:28.117, vectorEndX:-16.356, vectorEndY:28.117
2025-09-13 09:58:57.775 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:57.776 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975387499857,EndPoint:12.3993356227247
2025-09-13 09:58:57.819 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:57
2025-09-13 09:58:58.977 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:22
2025-09-13 09:58:58.977 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:58.977 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:58:58.977 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:22
2025-09-13 09:58:58.978 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:58:58.978 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:B_SourceLightType
2025-09-13 09:58:58.978 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:A_SourceLightType
2025-09-13 09:58:58.978 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,B_SourceLightType
2025-09-13 09:58:58.978 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,A_SourceLightType
2025-09-13 09:58:59.029 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:58:59.033 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_22_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:59.083 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:58:59.085 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_22_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:58:59.246 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;22/209,
2025-09-13 09:58:59.255 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:58:59.311 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:58:59.468 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:58:59
2025-09-13 09:58:59.510 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:58:59
2025-09-13 09:58:59.650 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 23
2025-09-13 09:58:59.650 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 23
2025-09-13 09:58:59.650 [Thd =112]  Info Default  开始扫描条带； [23/209]
2025-09-13 09:58:59.653 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:58:59.656 [Thd =94]  Info Default ***row:23, vectorBeginX:-16.356, vectorBeginY:27.689, captureBeginX:-12.736, captureBeginY:27.689, captureEndX:10.761, captureEndY:27.689, vectorEndX:14.663, vectorEndY:27.689
2025-09-13 09:58:59.656 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:58:59.657 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361487018602,EndPoint:-10.7607256708502
2025-09-13 09:59:00.858 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:23
2025-09-13 09:59:00.859 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:00.859 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:59:00.860 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:23
2025-09-13 09:59:00.860 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:00.860 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:B_SourceLightType
2025-09-13 09:59:00.860 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:A_SourceLightType
2025-09-13 09:59:00.860 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,B_SourceLightType
2025-09-13 09:59:00.860 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,A_SourceLightType
2025-09-13 09:59:00.912 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:59:00.914 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_23_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:00.964 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:59:00.966 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_23_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:01.122 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;23/209,
2025-09-13 09:59:01.131 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:59:01.317 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:59:01.352 [Thd =1]  Info Default DefectPicID:61180644-e310-45d9-861f-bd54a4228992
2025-09-13 09:59:01.610 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:59:01
2025-09-13 09:59:01.635 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:59:01
2025-09-13 09:59:01.667 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 24
2025-09-13 09:59:01.667 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 24
2025-09-13 09:59:01.667 [Thd =51]  Info Default  开始扫描条带； [24/209]
2025-09-13 09:59:01.669 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:59:01.672 [Thd =94]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:27.26186, CaptureEndX:-12.39934, CaptureEndY:27.26186, VectorBeginX:14.66322, VectorBeginY:27.26186, VectorEndX:-16.35590, VectorEndY:27.26186, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:59:01.672 [Thd =94]  Info Default ***row:24, vectorBeginX:14.663, vectorBeginY:27.262, captureBeginX:11.098, captureBeginY:27.262, captureEndX:-12.399, captureEndY:27.262, vectorEndX:-16.356, vectorEndY:27.262
2025-09-13 09:59:01.672 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:59:01.673 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975391162394,EndPoint:12.399335256471
2025-09-13 09:59:02.874 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:24
2025-09-13 09:59:02.874 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:02.874 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:59:02.875 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:24
2025-09-13 09:59:02.875 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:02.875 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:B_SourceLightType
2025-09-13 09:59:02.875 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,B_SourceLightType
2025-09-13 09:59:02.875 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:A_SourceLightType
2025-09-13 09:59:02.875 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,A_SourceLightType
2025-09-13 09:59:02.925 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:59:02.927 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_24_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:02.978 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:59:02.980 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_24_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:03.143 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;24/209,
2025-09-13 09:59:03.152 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:59:03.309 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:59:03.660 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 25
2025-09-13 09:59:03.660 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 25
2025-09-13 09:59:03.660 [Thd =196]  Info Default  开始扫描条带； [25/209]
2025-09-13 09:59:03.662 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:59:03.665 [Thd =94]  Info Default ***row:25, vectorBeginX:-16.356, vectorBeginY:26.834, captureBeginX:-12.736, captureBeginY:26.834, captureEndX:10.761, captureEndY:26.834, vectorEndX:14.663, vectorEndY:26.834
2025-09-13 09:59:03.665 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:59:03.666 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.736145100786,EndPoint:-10.7607292719244
2025-09-13 09:59:03.915 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:59:03
2025-09-13 09:59:03.973 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:59:03
2025-09-13 09:59:04.872 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:25
2025-09-13 09:59:04.872 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:04.872 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:59:04.873 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:25
2025-09-13 09:59:04.873 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:04.873 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:B_SourceLightType
2025-09-13 09:59:04.873 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:A_SourceLightType
2025-09-13 09:59:04.873 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,B_SourceLightType
2025-09-13 09:59:04.873 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,A_SourceLightType
2025-09-13 09:59:04.921 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:59:04.923 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_25_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:04.971 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:59:04.972 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_25_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:05.133 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;25/209,
2025-09-13 09:59:05.142 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:59:05.317 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:59:05.667 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 26
2025-09-13 09:59:05.667 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 26
2025-09-13 09:59:05.667 [Thd =221]  Info Default  开始扫描条带； [26/209]
2025-09-13 09:59:05.670 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:59:05.672 [Thd =94]  Info Default CaptureBeginX: 11.09754, CaptureBeginY:26.40677, CaptureEndX:-12.39933, CaptureEndY:26.40677, VectorBeginX:14.66322, VectorBeginY:26.40677, VectorEndX:-16.35590, VectorEndY:26.40677, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:59:05.672 [Thd =94]  Info Default ***row:26, vectorBeginX:14.663, vectorBeginY:26.407, captureBeginX:11.098, captureBeginY:26.407, captureEndX:-12.399, captureEndY:26.407, vectorEndX:-16.356, vectorEndY:26.407
2025-09-13 09:59:05.672 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:59:05.673 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975435718508,EndPoint:12.3993308008596
2025-09-13 09:59:05.953 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:59:05
2025-09-13 09:59:06.008 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:59:06
2025-09-13 09:59:06.874 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:26
2025-09-13 09:59:06.874 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:06.874 [Thd =34]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:59:06.875 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:26
2025-09-13 09:59:06.875 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:06.875 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:B_SourceLightType
2025-09-13 09:59:06.875 [Thd =23]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:A_SourceLightType
2025-09-13 09:59:06.875 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,B_SourceLightType
2025-09-13 09:59:06.875 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,A_SourceLightType
2025-09-13 09:59:06.925 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:59:06.927 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_26_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:06.978 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:59:06.979 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_26_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:07.141 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;26/209,
2025-09-13 09:59:07.150 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:59:07.191 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:59:07.541 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 27
2025-09-13 09:59:07.541 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 27
2025-09-13 09:59:07.541 [Thd =131]  Info Default  开始扫描条带； [27/209]
2025-09-13 09:59:07.544 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:59:07.546 [Thd =94]  Info Default ***row:27, vectorBeginX:-16.356, vectorBeginY:25.979, captureBeginX:-12.736, captureBeginY:25.979, captureEndX:10.761, captureEndY:25.979, vectorEndX:14.663, vectorEndY:25.979
2025-09-13 09:59:07.546 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:59:07.547 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361425983446,EndPoint:-10.7607317743658
2025-09-13 09:59:07.919 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:59:07
2025-09-13 09:59:07.983 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:59:07
2025-09-13 09:59:08.751 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:27
2025-09-13 09:59:08.751 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:08.751 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:59:08.752 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:27
2025-09-13 09:59:08.752 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:08.752 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:A_SourceLightType
2025-09-13 09:59:08.752 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:B_SourceLightType
2025-09-13 09:59:08.752 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,A_SourceLightType
2025-09-13 09:59:08.753 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,B_SourceLightType
2025-09-13 09:59:08.800 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:59:08.802 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_27_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:08.855 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:59:08.857 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_27_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:09.018 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;27/209,
2025-09-13 09:59:09.027 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:59:09.076 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:59:09.288 [Thd =46]  Info Default RecordCompleteStripNo begin:2025-09-13 09:59:09
2025-09-13 09:59:09.330 [Thd =46]  Info Default RecordCompleteStripNo end:2025-09-13 09:59:09
2025-09-13 09:59:09.426 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 28
2025-09-13 09:59:09.426 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 28
2025-09-13 09:59:09.426 [Thd =19]  Info Default  开始扫描条带； [28/209]
2025-09-13 09:59:09.428 [Thd =94]  Info Default ScanDirection is Positive
2025-09-13 09:59:09.431 [Thd =94]  Info Default CaptureBeginX: 11.09755, CaptureBeginY:25.55168, CaptureEndX:-12.39933, CaptureEndY:25.55168, VectorBeginX:14.66323, VectorBeginY:25.55168, VectorEndX:-16.35589, VectorEndY:25.55168, PrepareDistanceScan:4.00000, PrepareDistanceStep:0.00000, StepScan:0.434, CosValueY:1.00000, SinValueY:0.00000
2025-09-13 09:59:09.431 [Thd =94]  Info Default ***row:28, vectorBeginX:14.663, vectorBeginY:25.552, captureBeginX:11.098, captureBeginY:25.552, captureEndX:-12.399, captureEndY:25.552, vectorEndX:-16.356, vectorEndY:25.552
2025-09-13 09:59:09.431 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:59:09.432 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-11.0975482715891,EndPoint:12.3993261011213
2025-09-13 09:59:10.632 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:28
2025-09-13 09:59:10.633 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:10.633 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:59:10.634 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:28
2025-09-13 09:59:10.634 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:10.634 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:A_SourceLightType
2025-09-13 09:59:10.634 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:B_SourceLightType
2025-09-13 09:59:10.634 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,A_SourceLightType
2025-09-13 09:59:10.634 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,B_SourceLightType
2025-09-13 09:59:10.684 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:59:10.693 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_28_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:10.742 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:59:10.743 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_28_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:10.897 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;28/209,
2025-09-13 09:59:10.906 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:59:10.947 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:59:11.297 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 29
2025-09-13 09:59:11.297 [Thd =94]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 29
2025-09-13 09:59:11.297 [Thd =221]  Info Default  开始扫描条带； [29/209]
2025-09-13 09:59:11.299 [Thd =94]  Info Default ScanDirection is Negative
2025-09-13 09:59:11.301 [Thd =94]  Info Default ***row:29, vectorBeginX:-16.356, vectorBeginY:25.124, captureBeginX:-12.736, captureBeginY:25.124, captureEndX:10.761, captureEndY:25.124, vectorEndX:14.663, vectorEndY:25.124
2025-09-13 09:59:11.301 [Thd =94]  Info Default m_focusMapMode：0
2025-09-13 09:59:11.303 [Thd =94]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212071778,BeginPoint:12.7361390583056,EndPoint:-10.7607353144048
2025-09-13 09:59:12.351 [Thd =1]  Info Default VerifyModule.StopInspect() Stop !
2025-09-13 09:59:12.353 [Thd =1]  Info Default InspectProxy.Stop, InspectRuntimeInfo Thread health：
No memory resources：0001-01-01 00:00:00 
Excessive striping：0001-01-01 00:00:00 
 
Camera capture：
Camera capture received：2025-09-13 09:59:12 
no received resource：0001-01-01 00:00:00 
 
result handles thread health：
Result processing time：2025-09-13 09:59:12 
The number of images processed：24247/181412 
 
algorithm returns ：
MCU returns time：2025-09-13 09:59:12 
MCUSDK ReceiveCount：1231 
Effect return time：2025-09-13 09:49:55 
 return time：2025-09-13 09:59:12 
return count：1231 
max begin_pos：24504 
real_batch sum：24284 
 
ThreadPool：
Runing：180 , Available：193 ,I/O：200 

2025-09-13 09:59:12.504 [Thd =23]  Info Default Stripes are collected for data processing！strip_no:29
2025-09-13 09:59:12.505 [Thd =23]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:A_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:12.505 [Thd =23]  Info Default Singleton.addTask ,taskQueue:1
2025-09-13 09:59:12.505 [Thd =34]  Info Default Stripes are collected for data processing！strip_no:29
2025-09-13 09:59:12.505 [Thd =34]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:B_SourceLightType,lockTaskObj:55282704
2025-09-13 09:59:12.506 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:A_SourceLightType
2025-09-13 09:59:12.506 [Thd =34]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:B_SourceLightType
2025-09-13 09:59:12.506 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,A_SourceLightType
2025-09-13 09:59:12.506 [Thd =55]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,B_SourceLightType
2025-09-13 09:59:12.555 [Thd =24]  Info Default --source_light_Type:0,count:1
2025-09-13 09:59:12.557 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_29_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:12.603 [Thd =24]  Info Default --source_light_Type:1,count:1
2025-09-13 09:59:12.605 [Thd =24]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":53,"count_pack":217,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-09-13\\rcp_SL_1\\StripData\\strip_29_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-09-13 09:59:12.771 [Thd =94]  Info Default Strip scanning complete, waiting for collection... ;29/209,
2025-09-13 09:59:12.780 [Thd =94]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-09-13 09:59:12.934 [Thd =94]  Info Default singleAixsScan Testing 2
2025-09-13 09:59:13.114 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Stopping
2025-09-13 09:59:13.114 [Thd =1]  Info Default LightState 000:last:Inspecting,now:InspectError
2025-09-13 09:59:13.118 [Thd =1]  Info Default LightState 222:InspectError
2025-09-13 09:59:13.118 [Thd =1]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:59:13.118 [Thd =1]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:59:13.118 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Stopping
2025-09-13 09:59:13.118 [Thd =1]  Info Default LightState 000:last:InspectError,now:InspectError
2025-09-13 09:59:13.118 [Thd =1]  Info Default PLCKeyence:SetSystemStatus:WR DM0 2

2025-09-13 09:59:13.119 [Thd =1]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:59:13.157 [Thd =1]  Info Default AutoWorkerHelper.Stop() Abort() Complate 
2025-09-13 09:59:13.159 [Thd =94]  Error Default TDICamera0:can not StopSnap.
2025-09-13 09:59:13.159 [Thd =94]  Error Detect thread forced stop!{0} 正在中止线程。
2025-09-13 09:59:13.303 [Thd =94]  Info Default ***********Task finished.**************
2025-09-13 09:59:13.303 [Thd =94]  Info Default Stop the detection thread;
2025-09-13 09:59:13.303 [Thd =136]  Info Default 结果处理全部完成！
2025-09-13 09:59:13.304 [Thd =46]  Info Default InspectProxy.OnRuntimeState_Hanele()  RuntimeState:Stopped
2025-09-13 09:59:13.304 [Thd =46]  Info Default LightState 000:last:InspectError,now:InspectError
2025-09-13 09:59:13.304 [Thd =46]  Info Default PLCKeyence:SetSystemStatus:WR DM0 1

2025-09-13 09:59:13.306 [Thd =46]  Info Default PLCKeyence:SetSystemStatus Success
2025-09-13 09:59:13.330 [Thd =19]  Warn Default 还原光源最大功率
2025-09-13 09:59:13.330 [Thd =36]  Info Default LaserLamp MaxPower:300
2025-09-13 09:59:13.685 [Thd =38]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:59:14.330 [Thd =36]  Info Default OpenLamp Transmission
2025-09-13 09:59:15.132 [Thd =51]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:59:15.332 [Thd =36]  Info Default CloseLamp Reflection
2025-09-13 09:59:15.390 [Thd =46]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-09-13 09:59:15.390 [Thd =46]  Info Default *********Reset2**********
2025-09-13 09:59:15.390 [Thd =112]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-09-13 09:59:15.390 [Thd =131]  Info Default 检测完成！
2025-09-13 09:59:16.362 [Thd =180]  Info Default LaserLamp MaxPower:300,currentPower:180
2025-09-13 09:59:18.013 [Thd =1]  Info Default Stop End!
2025-09-13 09:59:18.013 [Thd =1]  Info Default release timer --begin
2025-09-13 09:59:18.035 [Thd =36]  Warn Default 已切换到面阵光路
2025-09-13 09:59:18.311 [Thd =38]  Info Default QuerySubstrateMode Area OK 
2025-09-13 09:59:18.311 [Thd =151]  Info Default 已切换到面阵聚焦模式
2025-09-13 09:59:18.363 [Thd =180]  Error Default SyncSend recv cmd timeout
2025-09-13 09:59:19.015 [Thd =1]  Info Default release timer --end
2025-09-13 09:59:19.015 [Thd =150]  Info VPMMSFocus: _isStop = true 
2025-09-13 09:59:19.015 [Thd =89]  Warn Default 还原光源最大功率
2025-09-13 09:59:19.015 [Thd =51]  Info Default LaserLamp MaxPower:300
2025-09-13 09:59:19.015 [Thd =48]  Warn Default 已切换到面阵光路
2025-09-13 09:59:20.016 [Thd =51]  Info Default OpenLamp Transmission
2025-09-13 09:59:20.817 [Thd =222]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:59:21.018 [Thd =51]  Info Default CloseLamp Reflection
2025-09-13 09:59:22.314 [Thd =38]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:59:22.314 [Thd =77]  Info Default 聚焦Track已关闭
2025-09-13 09:59:22.314 [Thd =94]  Info Default Finally Over！
2025-09-13 09:59:22.320 [Thd =94]  Info Default Inspection:End Memory usage:7160.332MB VirtualMemorySize:144.1 GB
2025-09-13 09:59:22.320 [Thd =94]  Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over!
2025-09-13 09:59:22.406 [Thd =112]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-09-13 09:59:23.640 [Thd =150]  Info Default QuerySubstrateMode Area OK 
2025-09-13 09:59:23.640 [Thd =222]  Info Default 已切换到面阵聚焦模式
2025-09-13 09:59:27.643 [Thd =150]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 09:59:27.643 [Thd =112]  Info Default 聚焦Track已关闭
2025-09-13 09:59:27.650 [Thd =1]  Info Default Inspection:Stop Memory usage:7160.281MB VirtualMemorySize:144.1 GB
2025-09-13 09:59:27.652 [Thd =112]  Info Default Chuck vacuum close
2025-09-13 09:59:28.654 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:59:28.654 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:1981
2025-09-13 09:59:28.655 [Thd =66]  Info Default Chuck vacuum close
2025-09-13 09:59:29.656 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:59:29.656 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:1981
2025-09-13 09:59:29.658 [Thd =89]  Info Default Chuck vacuum close
2025-09-13 09:59:30.658 [Thd =1]  Info Default ChuckVac: :False
2025-09-13 09:59:30.658 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopped! CurTaskName:1981
2025-09-13 09:59:30.658 [Thd =47]  Info Default Inspection Stop!
2025-09-13 09:59:31.467 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 09:59:31.486 [Thd =19]  Error Default MaskDefectPanel::GenerateTxtReport(): No Defect in this report:.1981
2025-09-13 10:00:17.707 [Thd =1]  Info Default DefectPicID:e8085488-c18b-400a-9314-2581fe4edc1c
2025-09-13 10:00:18.123 [Thd =1]  Info Default DefectPicID:7b51b739-b2d9-4079-850c-22f54fd121cb
2025-09-13 10:00:18.315 [Thd =1]  Info Default DefectPicID:7b51b739-b2d9-4079-850c-22f54fd121cb
2025-09-13 10:00:18.482 [Thd =1]  Info Default DefectPicID:7b51b739-b2d9-4079-850c-22f54fd121cb
2025-09-13 10:00:19.672 [Thd =1]  Info Default DefectPicID:7b51b739-b2d9-4079-850c-22f54fd121cb
2025-09-13 10:00:24.372 [Thd =1]  Info Default LightState 000:last:InspectError,now:StormInit
2025-09-13 10:00:24.387 [Thd =1]  Info Default LightState 222:StormInit
2025-09-13 10:00:25.462 [Thd =1]  Info Default DefectPicID:2a46e416-d1ee-4db8-af24-a4b14cafa722
2025-09-13 10:00:25.533 [Thd =1]  Info Default DefectPicID:2a46e416-d1ee-4db8-af24-a4b14cafa722
2025-09-13 10:00:25.609 [Thd =1]  Info Default DefectPicID:2a46e416-d1ee-4db8-af24-a4b14cafa722
2025-09-13 10:00:25.779 [Thd =1]  Info Default DefectPicID:bcb0377e-2548-4b40-9bc8-8ac0e083777f
2025-09-13 10:00:26.195 [Thd =1]  Info Default DefectPicID:bcb0377e-2548-4b40-9bc8-8ac0e083777f
2025-09-13 10:00:29.699 [Thd =1]  Info Default DefectPicID:1667f11a-54ac-4a63-b32a-a5294b06fe81
2025-09-13 10:00:29.899 [Thd =1]  Info Default DefectPicID:1667f11a-54ac-4a63-b32a-a5294b06fe81
2025-09-13 10:00:32.379 [Thd =1]  Info Default DefectPicID:2b77b5b1-3fbf-48dc-be70-3207dff34e92
2025-09-13 10:00:32.547 [Thd =1]  Info Default DefectPicID:2b77b5b1-3fbf-48dc-be70-3207dff34e92
2025-09-13 10:00:32.616 [Thd =1]  Info Default DefectPicID:2b77b5b1-3fbf-48dc-be70-3207dff34e92
2025-09-13 10:00:36.926 [Thd =1]  Info Default GetMarkPos  offsetX:131,offsety:1136
2025-09-13 10:01:10.709 [Thd =1]  Info Default Light Calibration:Before Memory usage:5086.355MB VirtualMemorySize:141.8 GB
2025-09-13 10:01:10.832 [Thd =1]  Info Default LineCameraStage:25
2025-09-13 10:01:10.832 [Thd =1]  Info Default LineCameraStage:25
2025-09-13 10:01:10.872 [Thd =151]  Info Default 设置光标定环境中，请等待......
2025-09-13 10:01:10.873 [Thd =150]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-09-13 10:01:10.878 [Thd =150]  Info Default SetDistortionPara disabled
2025-09-13 10:01:11.401 [Thd =150]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:01:11.401 [Thd =150]  Info Default VPMicroscope:SwitchIndex index:0
2025-09-13 10:01:11.402 [Thd =150]  Info Default VPMicroscope:Lens ObjCount:3
2025-09-13 10:01:11.403 [Thd =150]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-09-13 10:01:11.439 [Thd =150]  Info AbstractMicroscope Broadcast Event Finished
2025-09-13 10:01:11.440 [Thd =150]  Info Default m_StagePixelSizeX=0.212071778， m_StagePixelSizeY=0.212071778.
2025-09-13 10:01:11.440 [Thd =150]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-09-13 10:01:11.440 [Thd =150]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-09-13 10:01:11.440 [Thd =150]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-09-13 10:01:11.440 [Thd =150]  Info Default BaseScanObjectLine:------------------
2025-09-13 10:01:11.440 [Thd =150]  Info Default BaseScanObjectLine:*****************
2025-09-13 10:01:11.440 [Thd =150]  Info Default BaseScanObjectLine:0000000000000000
2025-09-13 10:01:11.440 [Thd =150]  Info Default StagePixelSizeY:0.212071778,PrepareDistanceScan:4,StepScan:0.434323001344,StepStep:0.430943397016025,CosValueY:1,SinValueY:0
2025-09-13 10:01:11.563 [Thd =150]  Info strip vectorBegin:(10.636602,31.493459),VectorEnd:(1.333633,31.493459),CaptureBegin:(6.636602,31.493459)，CaptureEnd：(5.333633,31.493459),StepScan:0.434323001344
2025-09-13 10:01:11.563 [Thd =150]  Info Default VectorBegin:(10.6366015932815,31.4934591630343)
2025-09-13 10:01:12.575 [Thd =150]  Info Default SetMaxPower:300
2025-09-13 10:01:12.575 [Thd =51]  Warn Default 检测光源最大功率(mw):300mw
2025-09-13 10:01:13.576 [Thd =47]  Info Default 打开光源，亮度：40%
2025-09-13 10:01:13.576 [Thd =136]  Info Default OpenLamp Transmission
2025-09-13 10:01:13.603 [Thd =89]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-09-13 10:01:14.378 [Thd =180]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:01:14.578 [Thd =136]  Info Default OpenLamp Reflection
2025-09-13 10:01:15.604 [Thd =89]  Error Default SyncSend recv cmd timeout
2025-09-13 10:01:16.383 [Thd =136]  Info Default PolarizationBaffleControl False: 2!
2025-09-13 10:01:17.578 [Thd =150]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 10:01:17.578 [Thd =51]  Info Default 聚焦Track已关闭
2025-09-13 10:01:18.284 [Thd =36]  Info Default ChangeLightPath: True!
2025-09-13 10:01:19.409 [Thd =150]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:01:20.912 [Thd =150]  Info Default QuerySubstrateMode Line OK 
2025-09-13 10:01:20.912 [Thd =89]  Info Default 已切换到线阵聚焦模式
2025-09-13 10:01:25.918 [Thd =150]  Info Default SetFocusTrack OpenTrack OK 
2025-09-13 10:01:25.918 [Thd =180]  Info Default 标定中，请等待......
2025-09-13 10:01:25.918 [Thd =131]  Info Default 聚焦Track已开启
2025-09-13 10:01:25.918 [Thd =48]  Info Default TDICamera0:Current:TDIStage：TDI256，Target：TDI256,CurrentSize:2048,2048
2025-09-13 10:01:25.918 [Thd =48]  Info Default TDICamera0:Camera size no change,do not set
2025-09-13 10:01:25.918 [Thd =123]  Info Default TDICamera1:Current:TDIStage：TDI120，Target：TDI120,CurrentSize:2048,2048
2025-09-13 10:01:25.918 [Thd =123]  Info Default TDICamera1:Camera size no change,do not set
2025-09-13 10:01:27.371 [Thd =48]  Info Default TDICamera0:TriggerMode is On,do not set
2025-09-13 10:01:27.875 [Thd =123]  Info Default TDICamera1:TriggerMode is On,do not set
2025-09-13 10:01:27.878 [Thd =150]  Info Default scanStrips:1,LampResult:40
2025-09-13 10:01:27.878 [Thd =150]  Info Default stripsIndex:0,lightIndex:0
2025-09-13 10:01:27.879 [Thd =150]  Info Default strip.VectorBegin.X:10.6366015932815,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:27.914 [Thd =150]  Info Default m_focusMapMode：0
2025-09-13 10:01:27.916 [Thd =150]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.6366015932815,EndPoint:-5.3336325892495
2025-09-13 10:01:27.916 [Thd =150]  Info Default strip.VectorBegin.X:1.3336325892495,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:39.169 [Thd =150]  Info Default stripsIndex:0,lightIndex:1
2025-09-13 10:01:39.169 [Thd =150]  Info Default strip.VectorBegin.X:10.6366015932815,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:39.188 [Thd =222]  Info Default LaserLamp MaxPower:300,currentPower:117
2025-09-13 10:01:39.771 [Thd =150]  Info Default m_focusMapMode：0
2025-09-13 10:01:39.772 [Thd =150]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.6366015932815,EndPoint:-5.3336325892495
2025-09-13 10:01:39.773 [Thd =150]  Info Default strip.VectorBegin.X:1.3336325892495,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:41.025 [Thd =150]  Info Default stripsIndex:0,lightIndex:2
2025-09-13 10:01:41.025 [Thd =150]  Info Default strip.VectorBegin.X:10.6366015932815,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:41.190 [Thd =222]  Error Default SyncSend recv cmd timeout
2025-09-13 10:01:41.208 [Thd =48]  Info Default LaserLamp MaxPower:300,currentPower:114
2025-09-13 10:01:41.630 [Thd =150]  Info Default m_focusMapMode：0
2025-09-13 10:01:41.632 [Thd =150]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.6366015932815,EndPoint:-5.3336325892495
2025-09-13 10:01:41.632 [Thd =150]  Info Default strip.VectorBegin.X:1.3336325892495,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:42.885 [Thd =150]  Info Default AutoLightReturn:--------------SL----------
2025-09-13 10:01:42.885 [Thd =150]  Info Default AutoLightReturn:0,trans_result:-152246544,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-09-13 10:01:42.885 [Thd =150]  Info Default stripsIndex:0,lightIndex:3
2025-09-13 10:01:42.885 [Thd =150]  Info Default strip.VectorBegin.X:10.6366015932815,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:43.208 [Thd =48]  Error Default SyncSend recv cmd timeout
2025-09-13 10:01:43.225 [Thd =20]  Info Default LaserLamp MaxPower:300,currentPower:0
2025-09-13 10:01:43.490 [Thd =150]  Info Default m_focusMapMode：0
2025-09-13 10:01:43.491 [Thd =150]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.6366015932815,EndPoint:-5.3336325892495
2025-09-13 10:01:43.491 [Thd =150]  Info Default strip.VectorBegin.X:1.3336325892495,strip.VectorBegin.Y:31.4934591630343
2025-09-13 10:01:44.743 [Thd =150]  Info Default SLLightCalibration.OpticalCalibrationScan() Result: dilation_value:2.5
2025-09-13 10:01:44.944 [Thd =150]  Info Default Light Complete 5,ResultMessge:结果:0
2025-09-13 10:01:44.989 [Thd =222]  Warn Default 还原光源最大功率
2025-09-13 10:01:44.989 [Thd =150]  Info Default LaserLamp MaxPower:300
2025-09-13 10:01:45.990 [Thd =112]  Info Default OpenLamp Transmission
2025-09-13 10:01:46.792 [Thd =180]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:01:46.930 [Thd =20]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:01:47.795 [Thd =112]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:01:47.795 [Thd =112]  Info Default CloseLamp Reflection
2025-09-13 10:01:48.814 [Thd =136]  Info Default LaserLamp MaxPower:300,currentPower:180
2025-09-13 10:01:49.435 [Thd =20]  Info Default QuerySubstrateMode Area OK 
2025-09-13 10:01:49.435 [Thd =123]  Info Default 已切换到面阵聚焦模式
2025-09-13 10:01:50.815 [Thd =136]  Error Default SyncSend recv cmd timeout
2025-09-13 10:01:53.438 [Thd =20]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 10:01:53.438 [Thd =89]  Info Default 聚焦Track已关闭
2025-09-13 10:01:53.446 [Thd =150]  Info Default Light Calibration:End Memory usage:5109.387MB VirtualMemorySize:141.8 GB
2025-09-13 10:01:53.447 [Thd =48]  Info Default 光标定完成！
2025-09-13 10:02:13.086 [Thd =177]  Info Default m_bIdel
2025-09-13 10:02:14.085 [Thd =37]  Error Default PLCKeyence:ReadDeviceCmd failed.
2025-09-13 10:03:01.757 [Thd =1]  Info Default Light Calibration:Before Memory usage:5121.57MB VirtualMemorySize:141.8 GB
2025-09-13 10:03:01.879 [Thd =1]  Info Default LineCameraStage:25
2025-09-13 10:03:01.879 [Thd =1]  Info Default LineCameraStage:25
2025-09-13 10:03:01.912 [Thd =136]  Info Default 设置光标定环境中，请等待......
2025-09-13 10:03:01.912 [Thd =36]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-09-13 10:03:01.915 [Thd =36]  Info Default SetDistortionPara disabled
2025-09-13 10:03:02.483 [Thd =36]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:03:02.483 [Thd =36]  Info Default VPMicroscope:SwitchIndex index:0
2025-09-13 10:03:02.483 [Thd =36]  Info Default VPMicroscope:Lens ObjCount:3
2025-09-13 10:03:02.485 [Thd =36]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-09-13 10:03:02.511 [Thd =36]  Info AbstractMicroscope Broadcast Event Finished
2025-09-13 10:03:02.512 [Thd =36]  Info Default m_StagePixelSizeX=0.212071778， m_StagePixelSizeY=0.212071778.
2025-09-13 10:03:02.512 [Thd =36]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-09-13 10:03:02.512 [Thd =36]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-09-13 10:03:02.512 [Thd =36]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-09-13 10:03:02.512 [Thd =36]  Info Default BaseScanObjectLine:------------------
2025-09-13 10:03:02.512 [Thd =36]  Info Default BaseScanObjectLine:*****************
2025-09-13 10:03:02.512 [Thd =36]  Info Default BaseScanObjectLine:0000000000000000
2025-09-13 10:03:02.512 [Thd =36]  Info Default StagePixelSizeY:0.212071778,PrepareDistanceScan:4,StepScan:0.434323001344,StepStep:0.430943397016025,CosValueY:1,SinValueY:0
2025-09-13 10:03:02.637 [Thd =36]  Info strip vectorBegin:(10.636598,31.643466),VectorEnd:(1.333629,31.643466),CaptureBegin:(6.636598,31.643466)，CaptureEnd：(5.333629,31.643466),StepScan:0.434323001344
2025-09-13 10:03:02.637 [Thd =36]  Info Default VectorBegin:(10.6365976259963,31.6434655964595)
2025-09-13 10:03:03.649 [Thd =51]  Warn Default 检测光源最大功率(mw):300mw
2025-09-13 10:03:03.649 [Thd =36]  Info Default SetMaxPower:300
2025-09-13 10:03:04.650 [Thd =180]  Info Default 打开光源，亮度：35%
2025-09-13 10:03:04.650 [Thd =221]  Info Default OpenLamp Transmission
2025-09-13 10:03:04.671 [Thd =136]  Info Default LaserLamp MaxPower:300,currentPower:105
2025-09-13 10:03:05.453 [Thd =20]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:03:05.652 [Thd =221]  Info Default OpenLamp Reflection
2025-09-13 10:03:06.671 [Thd =136]  Error Default SyncSend recv cmd timeout
2025-09-13 10:03:07.457 [Thd =221]  Info Default PolarizationBaffleControl False: 2!
2025-09-13 10:03:08.651 [Thd =36]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 10:03:08.651 [Thd =222]  Info Default 聚焦Track已关闭
2025-09-13 10:03:09.358 [Thd =123]  Info Default ChangeLightPath: True!
2025-09-13 10:03:10.490 [Thd =36]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:03:11.993 [Thd =36]  Info Default QuerySubstrateMode Line OK 
2025-09-13 10:03:11.993 [Thd =38]  Info Default 已切换到线阵聚焦模式
2025-09-13 10:03:16.997 [Thd =36]  Info Default SetFocusTrack OpenTrack OK 
2025-09-13 10:03:16.997 [Thd =111]  Info Default 聚焦Track已开启
2025-09-13 10:03:16.997 [Thd =131]  Info Default TDICamera0:Current:TDIStage：TDI256，Target：TDI256,CurrentSize:2048,2048
2025-09-13 10:03:16.997 [Thd =20]  Info Default 标定中，请等待......
2025-09-13 10:03:16.997 [Thd =131]  Info Default TDICamera0:Camera size no change,do not set
2025-09-13 10:03:16.997 [Thd =180]  Info Default TDICamera1:Current:TDIStage：TDI120，Target：TDI136,CurrentSize:2048,2048
2025-09-13 10:03:16.998 [Thd =180]  Info Default TDICamera1:Camera size no change,do not set
2025-09-13 10:03:17.980 [Thd =131]  Info Default TDICamera0:TriggerMode is On,do not set
2025-09-13 10:03:18.957 [Thd =180]  Info Default TDICamera1:TriggerMode is On,do not set
2025-09-13 10:03:18.962 [Thd =36]  Info Default scanStrips:1,LampResult:35
2025-09-13 10:03:18.963 [Thd =36]  Info Default stripsIndex:0,lightIndex:0
2025-09-13 10:03:18.963 [Thd =36]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:18.998 [Thd =36]  Info Default m_focusMapMode：0
2025-09-13 10:03:18.999 [Thd =36]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:03:18.999 [Thd =36]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:20.254 [Thd =36]  Info Default stripsIndex:0,lightIndex:1
2025-09-13 10:03:20.254 [Thd =36]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:20.275 [Thd =136]  Info Default LaserLamp MaxPower:300,currentPower:102
2025-09-13 10:03:20.858 [Thd =36]  Info Default m_focusMapMode：0
2025-09-13 10:03:20.860 [Thd =36]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:03:20.860 [Thd =36]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:22.115 [Thd =36]  Info Default stripsIndex:0,lightIndex:2
2025-09-13 10:03:22.115 [Thd =36]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:22.276 [Thd =136]  Error Default SyncSend recv cmd timeout
2025-09-13 10:03:22.294 [Thd =111]  Info Default LaserLamp MaxPower:300,currentPower:99
2025-09-13 10:03:22.720 [Thd =36]  Info Default m_focusMapMode：0
2025-09-13 10:03:22.721 [Thd =36]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:03:22.721 [Thd =36]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:23.978 [Thd =36]  Info Default AutoLightReturn:--------------SL----------
2025-09-13 10:03:24.000 [Thd =36]  Info Default AutoLightReturn:41,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-09-13 10:03:24.000 [Thd =36]  Info Default stripsIndex:0,lightIndex:0
2025-09-13 10:03:24.001 [Thd =36]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:24.295 [Thd =111]  Error Default SyncSend recv cmd timeout
2025-09-13 10:03:24.312 [Thd =221]  Info Default LaserLamp MaxPower:300,currentPower:123
2025-09-13 10:03:24.605 [Thd =36]  Info Default m_focusMapMode：0
2025-09-13 10:03:24.606 [Thd =36]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:03:24.606 [Thd =36]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:25.861 [Thd =36]  Info Default stripsIndex:0,lightIndex:1
2025-09-13 10:03:25.861 [Thd =36]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:26.313 [Thd =221]  Error Default SyncSend recv cmd timeout
2025-09-13 10:03:26.331 [Thd =111]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-09-13 10:03:26.465 [Thd =36]  Info Default m_focusMapMode：0
2025-09-13 10:03:26.466 [Thd =36]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:03:26.467 [Thd =36]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:27.723 [Thd =36]  Info Default stripsIndex:0,lightIndex:2
2025-09-13 10:03:27.723 [Thd =36]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:28.328 [Thd =36]  Info Default m_focusMapMode：0
2025-09-13 10:03:28.329 [Thd =36]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:03:28.329 [Thd =36]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:03:28.332 [Thd =111]  Error Default SyncSend recv cmd timeout
2025-09-13 10:03:28.350 [Thd =131]  Info Default LaserLamp MaxPower:300,currentPower:117
2025-09-13 10:03:29.582 [Thd =36]  Info Default AutoLightReturn:--------------SL----------
2025-09-13 10:03:29.607 [Thd =36]  Info Default AutoLightReturn:39,trans_result:0,ref_result:4，stripsIndex：0,scanStrips.Count:1
2025-09-13 10:03:29.607 [Thd =36]  Info Default SLLightCalibration.OpticalCalibrationScan() Result: dilation_value:2.5
2025-09-13 10:03:29.809 [Thd =36]  Info Default Light Complete 5,ResultMessge:结果:39,下调反射光台阶数
2025-09-13 10:03:29.854 [Thd =20]  Warn Default 还原光源最大功率
2025-09-13 10:03:29.855 [Thd =151]  Info Default LaserLamp MaxPower:300
2025-09-13 10:03:30.350 [Thd =131]  Error Default SyncSend recv cmd timeout
2025-09-13 10:03:30.855 [Thd =131]  Info Default OpenLamp Transmission
2025-09-13 10:03:31.004 [Thd =112]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:03:31.658 [Thd =38]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:03:32.661 [Thd =131]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:03:32.661 [Thd =131]  Info Default CloseLamp Reflection
2025-09-13 10:03:33.508 [Thd =112]  Info Default QuerySubstrateMode Area OK 
2025-09-13 10:03:33.508 [Thd =111]  Info Default 已切换到面阵聚焦模式
2025-09-13 10:03:33.700 [Thd =48]  Info Default LaserLamp MaxPower:300,currentPower:180
2025-09-13 10:03:35.701 [Thd =48]  Error Default SyncSend recv cmd timeout
2025-09-13 10:03:37.511 [Thd =112]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 10:03:37.511 [Thd =89]  Info Default 聚焦Track已关闭
2025-09-13 10:03:37.519 [Thd =151]  Info Default Light Calibration:End Memory usage:5115.5MB VirtualMemorySize:141.8 GB
2025-09-13 10:04:25.023 [Thd =1]  Info Default Light Calibration:Before Memory usage:5122.371MB VirtualMemorySize:141.8 GB
2025-09-13 10:04:25.146 [Thd =1]  Info Default LineCameraStage:25
2025-09-13 10:04:25.146 [Thd =1]  Info Default LineCameraStage:25
2025-09-13 10:04:25.182 [Thd =151]  Info Default 设置光标定环境中，请等待......
2025-09-13 10:04:25.183 [Thd =136]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-09-13 10:04:25.186 [Thd =136]  Info Default SetDistortionPara disabled
2025-09-13 10:04:25.541 [Thd =136]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:04:25.541 [Thd =136]  Info Default VPMicroscope:SwitchIndex index:0
2025-09-13 10:04:25.541 [Thd =136]  Info Default VPMicroscope:Lens ObjCount:3
2025-09-13 10:04:25.543 [Thd =136]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-09-13 10:04:25.568 [Thd =136]  Info AbstractMicroscope Broadcast Event Finished
2025-09-13 10:04:25.569 [Thd =136]  Info Default m_StagePixelSizeX=0.212071778， m_StagePixelSizeY=0.212071778.
2025-09-13 10:04:25.569 [Thd =136]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-09-13 10:04:25.569 [Thd =136]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-09-13 10:04:25.569 [Thd =136]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-09-13 10:04:25.569 [Thd =136]  Info Default BaseScanObjectLine:------------------
2025-09-13 10:04:25.569 [Thd =136]  Info Default BaseScanObjectLine:*****************
2025-09-13 10:04:25.569 [Thd =136]  Info Default BaseScanObjectLine:0000000000000000
2025-09-13 10:04:25.569 [Thd =136]  Info Default StagePixelSizeY:0.212071778,PrepareDistanceScan:4,StepScan:0.434323001344,StepStep:0.430943397016025,CosValueY:1,SinValueY:0
2025-09-13 10:04:25.694 [Thd =136]  Info strip vectorBegin:(10.636598,31.643466),VectorEnd:(1.333629,31.643466),CaptureBegin:(6.636598,31.643466)，CaptureEnd：(5.333629,31.643466),StepScan:0.434323001344
2025-09-13 10:04:25.694 [Thd =136]  Info Default VectorBegin:(10.6365976259963,31.6434655964595)
2025-09-13 10:04:26.706 [Thd =151]  Warn Default 检测光源最大功率(mw):300mw
2025-09-13 10:04:26.706 [Thd =136]  Info Default SetMaxPower:300
2025-09-13 10:04:27.707 [Thd =150]  Info Default 打开光源，亮度：39%
2025-09-13 10:04:27.707 [Thd =221]  Info Default OpenLamp Transmission
2025-09-13 10:04:27.727 [Thd =112]  Info Default LaserLamp MaxPower:300,currentPower:117
2025-09-13 10:04:28.510 [Thd =48]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:04:28.710 [Thd =221]  Info Default OpenLamp Reflection
2025-09-13 10:04:29.727 [Thd =112]  Error Default SyncSend recv cmd timeout
2025-09-13 10:04:30.515 [Thd =221]  Info Default PolarizationBaffleControl False: 2!
2025-09-13 10:04:31.708 [Thd =136]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 10:04:31.708 [Thd =150]  Info Default 聚焦Track已关闭
2025-09-13 10:04:32.414 [Thd =151]  Info Default ChangeLightPath: True!
2025-09-13 10:04:33.547 [Thd =136]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:04:35.051 [Thd =136]  Info Default QuerySubstrateMode Line OK 
2025-09-13 10:04:35.051 [Thd =222]  Info Default 已切换到线阵聚焦模式
2025-09-13 10:04:40.055 [Thd =136]  Info Default SetFocusTrack OpenTrack OK 
2025-09-13 10:04:40.055 [Thd =150]  Info Default 聚焦Track已开启
2025-09-13 10:04:40.055 [Thd =48]  Info Default TDICamera1:Current:TDIStage：TDI136，Target：TDI128,CurrentSize:2048,2048
2025-09-13 10:04:40.055 [Thd =48]  Info Default TDICamera1:Camera size no change,do not set
2025-09-13 10:04:40.055 [Thd =47]  Info Default 标定中，请等待......
2025-09-13 10:04:40.056 [Thd =151]  Info Default TDICamera0:Current:TDIStage：TDI256，Target：TDI256,CurrentSize:2048,2048
2025-09-13 10:04:40.056 [Thd =151]  Info Default TDICamera0:Camera size no change,do not set
2025-09-13 10:04:41.511 [Thd =48]  Info Default TDICamera1:TriggerMode is On,do not set
2025-09-13 10:04:42.014 [Thd =151]  Info Default TDICamera0:TriggerMode is On,do not set
2025-09-13 10:04:42.019 [Thd =136]  Info Default scanStrips:1,LampResult:39
2025-09-13 10:04:42.019 [Thd =136]  Info Default stripsIndex:0,lightIndex:0
2025-09-13 10:04:42.019 [Thd =136]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:04:42.054 [Thd =136]  Info Default m_focusMapMode：0
2025-09-13 10:04:42.055 [Thd =136]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:04:42.056 [Thd =136]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:04:43.309 [Thd =136]  Info Default stripsIndex:0,lightIndex:1
2025-09-13 10:04:43.309 [Thd =136]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:04:43.332 [Thd =47]  Info Default LaserLamp MaxPower:300,currentPower:114
2025-09-13 10:04:43.914 [Thd =136]  Info Default m_focusMapMode：0
2025-09-13 10:04:43.916 [Thd =136]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:04:43.916 [Thd =136]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:04:45.171 [Thd =136]  Info Default stripsIndex:0,lightIndex:2
2025-09-13 10:04:45.171 [Thd =136]  Info Default strip.VectorBegin.X:10.6365976259963,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:04:45.334 [Thd =47]  Error Default SyncSend recv cmd timeout
2025-09-13 10:04:45.351 [Thd =151]  Info Default LaserLamp MaxPower:300,currentPower:111
2025-09-13 10:04:45.776 [Thd =136]  Info Default m_focusMapMode：0
2025-09-13 10:04:45.777 [Thd =136]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212071778,BeginPoint:-6.63659762599634,EndPoint:-5.33362862196434
2025-09-13 10:04:45.777 [Thd =136]  Info Default strip.VectorBegin.X:1.33362862196434,strip.VectorBegin.Y:31.6434655964595
2025-09-13 10:04:47.035 [Thd =136]  Info Default AutoLightReturn:--------------SL----------
2025-09-13 10:04:47.059 [Thd =136]  Info Default AutoLightReturn:39,trans_result:0,ref_result:4，stripsIndex：0,scanStrips.Count:1
2025-09-13 10:04:47.059 [Thd =136]  Info Default SLLightCalibration.OpticalCalibrationScan() Result: dilation_value:2.5
2025-09-13 10:04:47.260 [Thd =136]  Info Default Light Complete 5,ResultMessge:结果:39,下调反射光台阶数
2025-09-13 10:04:47.305 [Thd =36]  Warn Default 还原光源最大功率
2025-09-13 10:04:47.306 [Thd =20]  Info Default LaserLamp MaxPower:300
2025-09-13 10:04:47.351 [Thd =151]  Error Default SyncSend recv cmd timeout
2025-09-13 10:04:48.307 [Thd =111]  Info Default OpenLamp Transmission
2025-09-13 10:04:49.061 [Thd =47]  Info VPMMSFocus: _isStop = true 
2025-09-13 10:04:49.110 [Thd =112]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:04:50.112 [Thd =111]  Info Default PolarizationBaffleControl True: 3!
2025-09-13 10:04:50.112 [Thd =111]  Info Default CloseLamp Reflection
2025-09-13 10:04:51.135 [Thd =89]  Info Default LaserLamp MaxPower:300,currentPower:180
2025-09-13 10:04:51.565 [Thd =47]  Info Default QuerySubstrateMode Area OK 
2025-09-13 10:04:51.565 [Thd =112]  Info Default 已切换到面阵聚焦模式
2025-09-13 10:04:53.136 [Thd =89]  Error Default SyncSend recv cmd timeout
2025-09-13 10:04:55.568 [Thd =47]  Info Default SetFocusTrack CloseTrack OK 
2025-09-13 10:04:55.568 [Thd =38]  Info Default 聚焦Track已关闭
2025-09-13 10:04:55.573 [Thd =20]  Info Default Light Calibration:End Memory usage:5114.875MB VirtualMemorySize:141.8 GB