2025-08-31 05:54:16.077 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":244,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_244_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:17.312 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:17 2025-08-31 05:54:17.328 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:17 2025-08-31 05:54:20.415 [Thd =33] Info Default Stripes are collected for data processing！strip_no:245 2025-08-31 05:54:20.416 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:245,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:20.416 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:20.426 [Thd =34] Info Default Stripes are collected for data processing！strip_no:245 2025-08-31 05:54:20.426 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:245,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:20.426 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:245,source_light_Type:B_SourceLightType 2025-08-31 05:54:20.426 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:245,source_light_Type:A_SourceLightType 2025-08-31 05:54:20.426 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：245,B_SourceLightType 2025-08-31 05:54:20.426 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：245,A_SourceLightType 2025-08-31 05:54:20.600 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;245/260, 2025-08-31 05:54:20.610 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:20.651 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:20.862 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:20 2025-08-31 05:54:20.889 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:20 2025-08-31 05:54:20.910 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:20.913 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":245,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_245_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:20.987 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 246 2025-08-31 05:54:20.987 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 246 2025-08-31 05:54:20.987 [Thd =258] Info Default 开始扫描条带； [246/260] 2025-08-31 05:54:21.003 [Thd =281] Info Default ScanDirection is Positive 2025-08-31 05:54:21.006 [Thd =281] Info Default CaptureBeginX: 68.33597, CaptureBeginY:-48.57931, CaptureEndX:-68.76728, CaptureEndY:-48.57931, VectorBeginX:69.90086, VectorBeginY:-48.57931, VectorEndX:-70.72377, VectorEndY:-48.57931, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 05:54:21.006 [Thd =281] Info Default ***row:246, vectorBeginX:69.901, vectorBeginY:-48.579, captureBeginX:68.336, captureBeginY:-48.579, captureEndX:-68.767, captureEndY:-48.579, vectorEndX:-70.724, vectorEndY:-48.579 2025-08-31 05:54:21.006 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:21.007 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456198249099,BeginPoint:-68.335969607979,EndPoint:68.7672840358815 2025-08-31 05:54:21.406 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:21.408 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":245,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_245_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:25.430 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:25 2025-08-31 05:54:25.449 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:25 2025-08-31 05:54:25.769 [Thd =33] Info Default Stripes are collected for data processing！strip_no:246 2025-08-31 05:54:25.769 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:246,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:25.769 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:25.776 [Thd =34] Info Default Stripes are collected for data processing！strip_no:246 2025-08-31 05:54:25.776 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:246,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:25.776 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:246,source_light_Type:B_SourceLightType 2025-08-31 05:54:25.776 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:246,source_light_Type:A_SourceLightType 2025-08-31 05:54:25.777 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：246,B_SourceLightType 2025-08-31 05:54:25.777 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：246,A_SourceLightType 2025-08-31 05:54:25.946 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;246/260, 2025-08-31 05:54:25.968 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:26.013 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:26.267 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:26.269 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":246,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_246_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:26.363 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 247 2025-08-31 05:54:26.363 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 247 2025-08-31 05:54:26.363 [Thd =320] Info Default 开始扫描条带； [247/260] 2025-08-31 05:54:26.372 [Thd =281] Info Default ScanDirection is Negative 2025-08-31 05:54:26.375 [Thd =281] Info Default ***row:247, vectorBeginX:-70.724, vectorBeginY:-49.008, captureBeginX:-69.105, captureBeginY:-49.008, captureEndX:67.999, captureEndY:-49.008, vectorEndX:69.901, vectorEndY:-49.008 2025-08-31 05:54:26.375 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:26.376 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456198249099,BeginPoint:69.1046731375493,EndPoint:-67.9985805063111 2025-08-31 05:54:26.760 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:26.763 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":246,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_246_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:30.976 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:30 2025-08-31 05:54:30.988 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:30 2025-08-31 05:54:31.124 [Thd =33] Info Default Stripes are collected for data processing！strip_no:247 2025-08-31 05:54:31.124 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:247,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:31.124 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:31.124 [Thd =34] Info Default Stripes are collected for data processing！strip_no:247 2025-08-31 05:54:31.125 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:247,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:31.125 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:247,source_light_Type:B_SourceLightType 2025-08-31 05:54:31.125 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:247,source_light_Type:A_SourceLightType 2025-08-31 05:54:31.125 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：247,B_SourceLightType 2025-08-31 05:54:31.125 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：247,A_SourceLightType 2025-08-31 05:54:31.295 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;247/260, 2025-08-31 05:54:31.305 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:31.346 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:31.597 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:31.599 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":247,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_247_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:31.683 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 248 2025-08-31 05:54:31.683 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 248 2025-08-31 05:54:31.683 [Thd =320] Info Default 开始扫描条带； [248/260] 2025-08-31 05:54:31.701 [Thd =281] Info Default ScanDirection is Positive 2025-08-31 05:54:31.703 [Thd =281] Info Default CaptureBeginX: 68.33602, CaptureBeginY:-49.43592, CaptureEndX:-68.76723, CaptureEndY:-49.43592, VectorBeginX:69.90091, VectorBeginY:-49.43592, VectorEndX:-70.72372, VectorEndY:-49.43592, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 05:54:31.704 [Thd =281] Info Default ***row:248, vectorBeginX:69.901, vectorBeginY:-49.436, captureBeginX:68.336, captureBeginY:-49.436, captureEndX:-68.767, captureEndY:-49.436, vectorEndX:-70.724, vectorEndY:-49.436 2025-08-31 05:54:31.704 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:31.705 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456198249099,BeginPoint:-68.3360190464556,EndPoint:68.7672345974049 2025-08-31 05:54:32.112 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:32.115 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":247,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_247_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:36.450 [Thd =33] Info Default Stripes are collected for data processing！strip_no:248 2025-08-31 05:54:36.450 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:248,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:36.450 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:36.454 [Thd =34] Info Default Stripes are collected for data processing！strip_no:248 2025-08-31 05:54:36.454 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:248,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:36.454 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:248,source_light_Type:B_SourceLightType 2025-08-31 05:54:36.454 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:248,source_light_Type:A_SourceLightType 2025-08-31 05:54:36.454 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：248,B_SourceLightType 2025-08-31 05:54:36.454 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：248,A_SourceLightType 2025-08-31 05:54:36.625 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;248/260, 2025-08-31 05:54:36.634 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:36.686 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:36.951 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:36.954 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":248,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_248_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:37.029 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 249 2025-08-31 05:54:37.031 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 249 2025-08-31 05:54:37.032 [Thd =209] Info Default 开始扫描条带； [249/260] 2025-08-31 05:54:37.047 [Thd =281] Info Default ScanDirection is Negative 2025-08-31 05:54:37.050 [Thd =281] Info Default ***row:249, vectorBeginX:-70.724, vectorBeginY:-49.864, captureBeginX:-69.105, captureBeginY:-49.864, captureEndX:67.999, captureEndY:-49.864, vectorEndX:69.901, vectorEndY:-49.864 2025-08-31 05:54:37.050 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:37.053 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456198249099,BeginPoint:69.1046324881353,EndPoint:-67.9986211557252 2025-08-31 05:54:37.453 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:37.455 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":248,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_248_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:37.515 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:37 2025-08-31 05:54:37.539 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:37 2025-08-31 05:54:41.812 [Thd =33] Info Default Stripes are collected for data processing！strip_no:249 2025-08-31 05:54:41.829 [Thd =34] Info Default Stripes are collected for data processing！strip_no:249 2025-08-31 05:54:41.830 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:249,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:41.830 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:41.830 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:249,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:41.830 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:249,source_light_Type:A_SourceLightType 2025-08-31 05:54:41.831 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:249,source_light_Type:B_SourceLightType 2025-08-31 05:54:41.831 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：249,A_SourceLightType 2025-08-31 05:54:41.831 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：249,B_SourceLightType 2025-08-31 05:54:41.984 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;249/260, 2025-08-31 05:54:41.994 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:42.026 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:42.313 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:42.316 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":249,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_249_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:42.373 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 250 2025-08-31 05:54:42.374 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 250 2025-08-31 05:54:42.374 [Thd =330] Info Default 开始扫描条带； [250/260] 2025-08-31 05:54:42.384 [Thd =281] Info Default ScanDirection is Positive 2025-08-31 05:54:42.387 [Thd =281] Info Default CaptureBeginX: 68.33606, CaptureBeginY:-50.29254, CaptureEndX:-68.76719, CaptureEndY:-50.29254, VectorBeginX:69.90095, VectorBeginY:-50.29254, VectorEndX:-70.72368, VectorEndY:-50.29254, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 05:54:42.387 [Thd =281] Info Default ***row:250, vectorBeginX:69.901, vectorBeginY:-50.293, captureBeginX:68.336, captureBeginY:-50.293, captureEndX:-68.767, captureEndY:-50.293, vectorEndX:-70.724, vectorEndY:-50.293 2025-08-31 05:54:42.387 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:42.388 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456198249099,BeginPoint:-68.336060245186,EndPoint:68.7671933986744 2025-08-31 05:54:42.585 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:42 2025-08-31 05:54:42.597 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:42 2025-08-31 05:54:42.825 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:42.828 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":249,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_249_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:47.128 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:47 2025-08-31 05:54:47.134 [Thd =34] Info Default Stripes are collected for data processing！strip_no:250 2025-08-31 05:54:47.134 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:250,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:47.134 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:47.134 [Thd =33] Info Default Stripes are collected for data processing！strip_no:250 2025-08-31 05:54:47.135 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:250,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:47.135 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:250,source_light_Type:A_SourceLightType 2025-08-31 05:54:47.135 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:250,source_light_Type:B_SourceLightType 2025-08-31 05:54:47.135 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：250,A_SourceLightType 2025-08-31 05:54:47.135 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：250,B_SourceLightType 2025-08-31 05:54:47.152 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:47 2025-08-31 05:54:47.309 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;250/260, 2025-08-31 05:54:47.318 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:47.355 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:47.622 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:47.624 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":250,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_250_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:47.698 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 251 2025-08-31 05:54:47.698 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 251 2025-08-31 05:54:47.698 [Thd =330] Info Default 开始扫描条带； [251/260] 2025-08-31 05:54:47.716 [Thd =281] Info Default ScanDirection is Negative 2025-08-31 05:54:47.719 [Thd =281] Info Default ***row:251, vectorBeginX:-70.724, vectorBeginY:-50.721, captureBeginX:-69.105, captureBeginY:-50.721, captureEndX:67.999, captureEndY:-50.721, vectorEndX:69.901, vectorEndY:-50.721 2025-08-31 05:54:47.719 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:47.721 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456198249099,BeginPoint:69.1045936697759,EndPoint:-67.9986599740846 2025-08-31 05:54:48.117 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:48.119 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":250,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_250_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:52.498 [Thd =34] Info Default Stripes are collected for data processing！strip_no:251 2025-08-31 05:54:52.498 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:251,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:52.498 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:52.498 [Thd =33] Info Default Stripes are collected for data processing！strip_no:251 2025-08-31 05:54:52.498 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:251,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:52.498 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:251,source_light_Type:A_SourceLightType 2025-08-31 05:54:52.498 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:251,source_light_Type:B_SourceLightType 2025-08-31 05:54:52.498 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：251,A_SourceLightType 2025-08-31 05:54:52.499 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：251,B_SourceLightType 2025-08-31 05:54:52.657 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;251/260, 2025-08-31 05:54:52.667 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:52.685 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:52 2025-08-31 05:54:52.710 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:52.717 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:52 2025-08-31 05:54:52.981 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:52.984 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":251,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_251_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:53.055 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 252 2025-08-31 05:54:53.055 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 252 2025-08-31 05:54:53.055 [Thd =193] Info Default 开始扫描条带； [252/260] 2025-08-31 05:54:53.064 [Thd =281] Info Default ScanDirection is Positive 2025-08-31 05:54:53.080 [Thd =281] Info Default CaptureBeginX: 68.33612, CaptureBeginY:-51.14915, CaptureEndX:-68.76714, CaptureEndY:-51.14915, VectorBeginX:69.90101, VectorBeginY:-51.14915, VectorEndX:-70.72363, VectorEndY:-51.14915, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 05:54:53.080 [Thd =281] Info Default ***row:252, vectorBeginX:69.901, vectorBeginY:-51.149, captureBeginX:68.336, captureBeginY:-51.149, captureEndX:-68.767, captureEndY:-51.149, vectorEndX:-70.724, vectorEndY:-51.149 2025-08-31 05:54:53.080 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:53.083 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456198249099,BeginPoint:-68.3361159702837,EndPoint:68.7671376735768 2025-08-31 05:54:53.476 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:53.479 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":251,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_251_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:57.831 [Thd =33] Info Default Stripes are collected for data processing！strip_no:252 2025-08-31 05:54:57.831 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:252,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:57.831 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:54:57.831 [Thd =34] Info Default Stripes are collected for data processing！strip_no:252 2025-08-31 05:54:57.831 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:252,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:54:57.831 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:252,source_light_Type:B_SourceLightType 2025-08-31 05:54:57.831 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:252,source_light_Type:A_SourceLightType 2025-08-31 05:54:57.831 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：252,B_SourceLightType 2025-08-31 05:54:57.831 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：252,A_SourceLightType 2025-08-31 05:54:58.001 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;252/260, 2025-08-31 05:54:58.011 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:54:58.056 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:54:58.309 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:54:58.311 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":252,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_252_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:58.396 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 253 2025-08-31 05:54:58.396 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 253 2025-08-31 05:54:58.396 [Thd =320] Info Default 开始扫描条带； [253/260] 2025-08-31 05:54:58.405 [Thd =281] Info Default ScanDirection is Negative 2025-08-31 05:54:58.408 [Thd =281] Info Default ***row:253, vectorBeginX:-70.724, vectorBeginY:-51.577, captureBeginX:-69.105, captureBeginY:-51.577, captureEndX:67.999, captureEndY:-51.577, vectorEndX:69.901, vectorEndY:-51.577 2025-08-31 05:54:58.408 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:54:58.409 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456198249099,BeginPoint:69.1045369070806,EndPoint:-67.9987167367799 2025-08-31 05:54:58.815 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:54:58.818 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":252,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_252_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:54:59.776 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:54:59 2025-08-31 05:54:59.797 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:54:59 2025-08-31 05:55:03.157 [Thd =34] Info Default Stripes are collected for data processing！strip_no:253 2025-08-31 05:55:03.158 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:253,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:03.158 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:55:03.158 [Thd =33] Info Default Stripes are collected for data processing！strip_no:253 2025-08-31 05:55:03.158 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:253,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:03.158 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:253,source_light_Type:A_SourceLightType 2025-08-31 05:55:03.158 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:253,source_light_Type:B_SourceLightType 2025-08-31 05:55:03.158 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：253,A_SourceLightType 2025-08-31 05:55:03.158 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：253,B_SourceLightType 2025-08-31 05:55:03.335 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;253/260, 2025-08-31 05:55:03.345 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:55:03.390 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:55:03.646 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:55:03.649 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":253,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_253_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:03.750 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 254 2025-08-31 05:55:03.750 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 254 2025-08-31 05:55:03.750 [Thd =202] Info Default 开始扫描条带； [254/260] 2025-08-31 05:55:03.760 [Thd =281] Info Default ScanDirection is Positive 2025-08-31 05:55:03.763 [Thd =281] Info Default CaptureBeginX: 68.33615, CaptureBeginY:-52.00578, CaptureEndX:-68.76710, CaptureEndY:-52.00578, VectorBeginX:69.90104, VectorBeginY:-52.00578, VectorEndX:-70.72359, VectorEndY:-52.00578, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 05:55:03.763 [Thd =281] Info Default ***row:254, vectorBeginX:69.901, vectorBeginY:-52.006, captureBeginX:68.336, captureBeginY:-52.006, captureEndX:-68.767, captureEndY:-52.006, vectorEndX:-70.724, vectorEndY:-52.006 2025-08-31 05:55:03.763 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:55:03.764 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456198249099,BeginPoint:-68.3361511875688,EndPoint:68.7671024562916 2025-08-31 05:55:03.815 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:03 2025-08-31 05:55:03.833 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:03 2025-08-31 05:55:04.153 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:55:04.155 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":253,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_253_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:08.386 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:08 2025-08-31 05:55:08.408 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:08 2025-08-31 05:55:08.509 [Thd =34] Info Default Stripes are collected for data processing！strip_no:254 2025-08-31 05:55:08.509 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:254,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:08.509 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:55:08.509 [Thd =33] Info Default Stripes are collected for data processing！strip_no:254 2025-08-31 05:55:08.509 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:254,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:08.510 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:254,source_light_Type:A_SourceLightType 2025-08-31 05:55:08.510 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:254,source_light_Type:B_SourceLightType 2025-08-31 05:55:08.510 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：254,A_SourceLightType 2025-08-31 05:55:08.510 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：254,B_SourceLightType 2025-08-31 05:55:08.681 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;254/260, 2025-08-31 05:55:08.690 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:55:08.740 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:55:08.983 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:55:08.985 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":254,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_254_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:09.076 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 255 2025-08-31 05:55:09.076 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 255 2025-08-31 05:55:09.076 [Thd =163] Info Default 开始扫描条带； [255/260] 2025-08-31 05:55:09.085 [Thd =281] Info Default ScanDirection is Negative 2025-08-31 05:55:09.088 [Thd =281] Info Default ***row:255, vectorBeginX:-70.724, vectorBeginY:-52.434, captureBeginX:-69.105, captureBeginY:-52.434, captureEndX:67.999, captureEndY:-52.434, vectorEndX:69.901, vectorEndY:-52.434 2025-08-31 05:55:09.088 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:55:09.091 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456198249099,BeginPoint:69.1045055960454,EndPoint:-67.9987480478151 2025-08-31 05:55:09.493 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:55:09.496 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":254,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_254_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:13.837 [Thd =34] Info Default Stripes are collected for data processing！strip_no:255 2025-08-31 05:55:13.837 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:255,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:13.837 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:55:13.838 [Thd =33] Info Default Stripes are collected for data processing！strip_no:255 2025-08-31 05:55:13.838 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:255,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:13.838 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:255,source_light_Type:A_SourceLightType 2025-08-31 05:55:13.838 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:255,source_light_Type:B_SourceLightType 2025-08-31 05:55:13.838 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：255,A_SourceLightType 2025-08-31 05:55:13.838 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：255,B_SourceLightType 2025-08-31 05:55:13.927 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:13 2025-08-31 05:55:13.960 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:13 2025-08-31 05:55:14.009 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;255/260, 2025-08-31 05:55:14.018 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:55:14.077 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:55:14.316 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:55:14.318 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":255,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_255_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:14.427 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 256 2025-08-31 05:55:14.427 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 256 2025-08-31 05:55:14.427 [Thd =209] Info Default 开始扫描条带； [256/260] 2025-08-31 05:55:14.443 [Thd =281] Info Default ScanDirection is Positive 2025-08-31 05:55:14.446 [Thd =281] Info Default CaptureBeginX: 68.33620, CaptureBeginY:-52.86240, CaptureEndX:-68.76705, CaptureEndY:-52.86240, VectorBeginX:69.90109, VectorBeginY:-52.86240, VectorEndX:-70.72354, VectorEndY:-52.86240, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 05:55:14.446 [Thd =281] Info Default ***row:256, vectorBeginX:69.901, vectorBeginY:-52.862, captureBeginX:68.336, captureBeginY:-52.862, captureEndX:-68.767, captureEndY:-52.862, vectorEndX:-70.724, vectorEndY:-52.862 2025-08-31 05:55:14.446 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:55:14.447 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456198249099,BeginPoint:-68.336199283272,EndPoint:68.7670543605885 2025-08-31 05:55:14.809 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:55:14.811 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":255,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_255_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:19.209 [Thd =34] Info Default Stripes are collected for data processing！strip_no:256 2025-08-31 05:55:19.209 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:256,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:19.209 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:55:19.210 [Thd =33] Info Default Stripes are collected for data processing！strip_no:256 2025-08-31 05:55:19.210 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:256,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:19.210 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:256,source_light_Type:A_SourceLightType 2025-08-31 05:55:19.210 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:256,source_light_Type:B_SourceLightType 2025-08-31 05:55:19.210 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：256,A_SourceLightType 2025-08-31 05:55:19.210 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：256,B_SourceLightType 2025-08-31 05:55:19.365 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;256/260, 2025-08-31 05:55:19.375 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:55:19.418 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:55:19.687 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:55:19.690 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":256,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_256_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:19.764 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 257 2025-08-31 05:55:19.764 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 257 2025-08-31 05:55:19.764 [Thd =258] Info Default 开始扫描条带； [257/260] 2025-08-31 05:55:19.780 [Thd =281] Info Default ScanDirection is Negative 2025-08-31 05:55:19.783 [Thd =281] Info Default ***row:257, vectorBeginX:-70.724, vectorBeginY:-53.291, captureBeginX:-69.104, captureBeginY:-53.291, captureEndX:67.999, captureEndY:-53.291, vectorEndX:69.901, vectorEndY:-53.291 2025-08-31 05:55:19.783 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:55:19.785 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456198249099,BeginPoint:69.1044544485845,EndPoint:-67.998799195276 2025-08-31 05:55:19.996 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:19 2025-08-31 05:55:20.007 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:20 2025-08-31 05:55:20.214 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:55:20.217 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":256,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_256_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:24.551 [Thd =33] Info Default Stripes are collected for data processing！strip_no:257 2025-08-31 05:55:24.551 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:257,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:24.551 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:55:24.555 [Thd =34] Info Default Stripes are collected for data processing！strip_no:257 2025-08-31 05:55:24.555 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:257,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:24.555 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:257,source_light_Type:B_SourceLightType 2025-08-31 05:55:24.555 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:257,source_light_Type:A_SourceLightType 2025-08-31 05:55:24.555 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：257,B_SourceLightType 2025-08-31 05:55:24.555 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：257,A_SourceLightType 2025-08-31 05:55:24.712 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;257/260, 2025-08-31 05:55:24.722 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:55:24.759 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:55:25.032 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:55:25.034 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":257,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_257_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:25.101 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 258 2025-08-31 05:55:25.101 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 258 2025-08-31 05:55:25.101 [Thd =321] Info Default 开始扫描条带； [258/260] 2025-08-31 05:55:25.110 [Thd =281] Info Default ScanDirection is Positive 2025-08-31 05:55:25.113 [Thd =281] Info Default CaptureBeginX: 68.33623, CaptureBeginY:-53.71902, CaptureEndX:-68.76702, CaptureEndY:-53.71902, VectorBeginX:69.90112, VectorBeginY:-53.71902, VectorEndX:-70.72351, VectorEndY:-53.71902, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 05:55:25.113 [Thd =281] Info Default ***row:258, vectorBeginX:69.901, vectorBeginY:-53.719, captureBeginX:68.336, captureBeginY:-53.719, captureEndX:-68.767, captureEndY:-53.719, vectorEndX:-70.724, vectorEndY:-53.719 2025-08-31 05:55:25.114 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:55:25.116 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456198249099,BeginPoint:-68.3362343174517,EndPoint:68.7670193264088 2025-08-31 05:55:25.533 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:25 2025-08-31 05:55:25.545 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:25 2025-08-31 05:55:25.554 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:55:25.556 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":257,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_257_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:29.566 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:29 2025-08-31 05:55:29.580 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:29 2025-08-31 05:55:29.861 [Thd =33] Info Default Stripes are collected for data processing！strip_no:258 2025-08-31 05:55:29.861 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:258,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:29.861 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:55:29.873 [Thd =34] Info Default Stripes are collected for data processing！strip_no:258 2025-08-31 05:55:29.874 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:258,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:29.874 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:258,source_light_Type:B_SourceLightType 2025-08-31 05:55:29.874 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：258,B_SourceLightType 2025-08-31 05:55:29.874 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：258,A_SourceLightType 2025-08-31 05:55:29.874 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:258,source_light_Type:A_SourceLightType 2025-08-31 05:55:30.031 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;258/260, 2025-08-31 05:55:30.040 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:55:30.088 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:55:30.351 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:55:30.354 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":258,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_258_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:30.435 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 259 2025-08-31 05:55:30.435 [Thd =281] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 259 2025-08-31 05:55:30.435 [Thd =311] Info Default 开始扫描条带； [259/260] 2025-08-31 05:55:30.450 [Thd =281] Info Default ScanDirection is Negative 2025-08-31 05:55:30.453 [Thd =281] Info Default ***row:259, vectorBeginX:-70.723, vectorBeginY:-54.147, captureBeginX:-69.104, captureBeginY:-54.147, captureEndX:67.999, captureEndY:-54.147, vectorEndX:69.901, vectorEndY:-54.147 2025-08-31 05:55:30.453 [Thd =281] Info Default m_focusMapMode：0 2025-08-31 05:55:30.455 [Thd =281] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456198249099,BeginPoint:69.1044258230962,EndPoint:-67.9988278207643 2025-08-31 05:55:30.867 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:55:30.869 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":258,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_258_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:35.203 [Thd =34] Info Default Stripes are collected for data processing！strip_no:259 2025-08-31 05:55:35.204 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:259,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:35.204 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 05:55:35.374 [Thd =281] Info Default Strip scanning complete, waiting for collection... ;259/260, 2025-08-31 05:55:35.599 [Thd =33] Info Default Stripes are collected for data processing！strip_no:259 2025-08-31 05:55:35.599 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:259,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 05:55:35.599 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:259,source_light_Type:A_SourceLightType 2025-08-31 05:55:35.599 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:259,source_light_Type:B_SourceLightType 2025-08-31 05:55:35.599 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：259,A_SourceLightType 2025-08-31 05:55:35.599 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：259,B_SourceLightType 2025-08-31 05:55:35.608 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 05:55:35.652 [Thd =281] Info Default singleAixsScan Testing 2 2025-08-31 05:55:36.003 [Thd =281] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 260 2025-08-31 05:55:36.003 [Thd =281] Info Default begin--m_TaskFinish_event---------- 2025-08-31 05:55:36.003 [Thd =269] Info Default 扫描完成,等待结果处理... 2025-08-31 05:55:36.075 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 05:55:36.077 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":259,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_259_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:36.570 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 05:55:36.572 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":259,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":314,"count_pack":1296,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_259_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 05:55:36.583 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:36 2025-08-31 05:55:36.594 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:36 2025-08-31 05:55:37.003 [Thd =281] Info Default end--m_TaskFinish_event---------- 2025-08-31 05:55:38.731 [Thd =281] Info Default ***********Task finished.************** 2025-08-31 05:55:38.731 [Thd =281] Info Default Stop the detection thread; 2025-08-31 05:55:38.792 [Thd =269] Warn Default 还原光源最大功率 2025-08-31 05:55:38.792 [Thd =320] Info Default LaserLamp MaxPower:300 2025-08-31 05:55:39.739 [Thd =322] Info MMSFocus _isStop = true 2025-08-31 05:55:39.794 [Thd =320] Info Default OpenLamp Transmission 2025-08-31 05:55:40.598 [Thd =269] Info Default PolarizationBaffleControl True: 3! 2025-08-31 05:55:40.797 [Thd =320] Info Default CloseLamp Reflection 2025-08-31 05:55:41.837 [Thd =236] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 05:55:42.783 [Thd =322] Info Default QuerySubstrateMode Area OK 2025-08-31 05:55:42.783 [Thd =267] Info Default 已切换到面阵聚焦模式 2025-08-31 05:55:43.343 [Thd =236] Error Default SyncSend recv cmd timeout 2025-08-31 05:55:43.757 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:43 2025-08-31 05:55:43.778 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:43 2025-08-31 05:55:44.789 [Thd =322] Info Default SetFocusTrack CloseTrack OK 2025-08-31 05:55:44.789 [Thd =321] Info Default 聚焦Track已关闭 2025-08-31 05:55:45.794 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:45 2025-08-31 05:55:45.804 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:45 2025-08-31 05:55:48.338 [Thd =224] Info Default RecordCompleteStripNo begin:2025-08-31 05:55:48 2025-08-31 05:55:48.349 [Thd =224] Info Default RecordCompleteStripNo end:2025-08-31 05:55:48 2025-08-31 05:55:48.350 [Thd =215] Info Default 等待硬件处理中... 2025-08-31 05:55:50.803 [Thd =258] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 05:55:50.803 [Thd =258] Error Default InitializeService: : ChangeLightPath to Area error 2025-08-31 05:55:50.803 [Thd =281] Info Default Finally Over！ 2025-08-31 05:55:50.803 [Thd =281] Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over! 2025-08-31 05:55:50.803 [Thd =224] Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Finished 2025-08-31 05:55:50.803 [Thd =224] Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Finished 2025-08-31 05:55:50.803 [Thd =193] Info Default 硬件处理完成。 2025-08-31 05:55:50.805 [Thd =224] Info Default SetSystemStatus:WR DM0 1 2025-08-31 05:55:50.805 [Thd =224] Info Default SetSystemStatus Success 2025-08-31 05:55:50.806 [Thd =236] Info Default 结果处理全部完成！ 2025-08-31 05:55:50.826 [Thd =336] Info Default Chuck vacuum close 2025-08-31 05:55:51.827 [Thd =1] Info Default ChuckVac: :False 2025-08-31 05:55:51.827 [Thd =1] Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished! CurTaskName:4137 2025-08-31 05:55:52.647 [Thd =1] Info Default PolarizationBaffleControl True: 3! 2025-08-31 05:55:52.962 [Thd =1] Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished End! CurTaskName:4137 2025-08-31 05:55:52.980 [Thd =224] Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down. 2025-08-31 05:55:52.980 [Thd =224] Info Default *********Reset2********** 2025-08-31 05:55:52.980 [Thd =215] Info Default 检测完成！ 2025-08-31 05:55:52.980 [Thd =236] Info Default MCUHelper.ResetMcu(),Restart service！ 2025-08-31 05:55:56.155 [Thd =321] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028410,"ServiceStartTime":"2025\/8\/31 5:29:48","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:55:57.657 [Thd =336] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028411,"ServiceStartTime":"2025\/8\/31 5:29:48","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:55:57.658 [Thd =320] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028411,"ServiceStartTime":"2025\/8\/31 5:29:50","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:55:57.658 [Thd =300] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028411,"ServiceStartTime":"2025\/8\/31 5:31:50","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:55:58.666 [Thd =215] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028415,"ServiceStartTime":"2025\/8\/31 5:55:55","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:55:59.183 [Thd =320] Error Default EFEM is ready 2025-08-31 05:55:59.183 [Thd =269] Info Default EFEM is ready 2025-08-31 05:56:00.186 [Thd =193] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028416,"ServiceStartTime":"2025\/8\/31 5:55:54","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:56:00.418 [Thd =193] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028416,"ServiceStartTime":"2025\/8\/31 5:55:57","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:56:00.561 [Thd =320] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2028416,"ServiceStartTime":"2025\/8\/31 5:57:57","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":1,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 05:56:01.045 [Thd =236] Info Default MCUHelper.ResetMcu(),All Dpus are restarted！ 2025-08-31 06:00:11.908 [Thd =262] Info Default m_bIdel 2025-08-31 06:00:12.908 [Thd =49] Error Default ReadDeviceCmd failed. 2025-08-31 07:12:48.822 [Thd =330] Error Default EFEM is ready 2025-08-31 07:12:48.823 [Thd =340] Info Default EFEM is ready 2025-08-31 07:13:24.117 [Thd =330] Error Default EFEM is ready 2025-08-31 07:13:24.117 [Thd =302] Info Default EFEM is ready 2025-08-31 07:15:30.334 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.Views.UCSetupMainMethodName:SelectProductSetup After Memory usage:12937.73MB VirtualMemorySize:162.1 GB 2025-08-31 07:15:32.009 [Thd =1] Error Default SetProductSetup start 2025-08-31 07:15:32.044 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:15:32.044 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:15:33.977 [Thd =258] Info MMSFocus _isStop = true 2025-08-31 07:15:34.029 [Thd =258] Info Default IKAP Start of stream 2025-08-31 07:15:34.029 [Thd =258] Info Default Preview Camera StartSnap 2025-08-31 07:15:34.068 [Thd =258] Info Default IKAP End of stream 2025-08-31 07:15:34.068 [Thd =258] Info Default Preview Camera StopSnap 2025-08-31 07:15:34.113 [Thd =258] Info Default IKAP Start of stream 2025-08-31 07:15:34.114 [Thd =258] Info Default Preview Camera StartSnap 2025-08-31 07:15:34.117 [Thd =258] Info Default camera_line StartTrigger 2025-08-31 07:15:35.456 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:15:35.457 [Thd =258] Info Default Axis Y:5,PulseWidth:0.002,TriggerDistance:0.082975679542,BeginPoint:-175,EndPoint:0 2025-08-31 07:15:45.681 [Thd =258] Info Default IKAP End of stream 2025-08-31 07:15:45.681 [Thd =258] Info Default Preview Camera StopSnap 2025-08-31 07:15:46.386 [Thd =258] Info Default RefLamp Rise: True! 2025-08-31 07:16:15.596 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:16:15.596 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:16:20.357 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:16:20.357 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:16:27.279 [Thd =302] Info Default Chuck vacuum close 2025-08-31 07:16:28.279 [Thd =330] Info Default ChuckVac: :False 2025-08-31 07:16:30.291 [Thd =1] Info Default GetMarkPos offsetX:956,offsety:455 2025-08-31 07:16:36.632 [Thd =1] Info Default GetMarkPos offsetX:614,offsety:511 2025-08-31 07:16:38.371 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:16:38.371 [Thd =337] Info Default Chuck vacuum close 2025-08-31 07:16:39.373 [Thd =1] Info Default ChuckVac: :False 2025-08-31 07:16:48.544 [Thd =330] Info Default Chuck vacuum close 2025-08-31 07:16:49.545 [Thd =302] Info Default ChuckVac: :False 2025-08-31 07:16:51.603 [Thd =1] Info Default GetMarkPos offsetX:1168,offsety:454 2025-08-31 07:16:56.847 [Thd =1] Info Default GetMarkPos offsetX:614,offsety:512 2025-08-31 07:16:59.168 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:16:59.169 [Thd =269] Info Default Chuck vacuum close 2025-08-31 07:17:00.169 [Thd =1] Info Default ChuckVac: :False 2025-08-31 07:17:09.774 [Thd =299] Info Default Chuck vacuum close 2025-08-31 07:17:10.774 [Thd =311] Info Default ChuckVac: :False 2025-08-31 07:17:12.833 [Thd =1] Info Default GetMarkPos offsetX:1167,offsety:214 2025-08-31 07:17:15.819 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:17:15.819 [Thd =269] Info Default Chuck vacuum close 2025-08-31 07:17:16.821 [Thd =1] Info Default ChuckVac: :False 2025-08-31 07:17:21.726 [Thd =302] Info Default Alignment ... 2025-08-31 07:17:21.853 [Thd =163] Info Default Chuck vacuum close 2025-08-31 07:17:22.855 [Thd =258] Info Default ChuckVac: :False 2025-08-31 07:17:32.536 [Thd =269] Info Default Switch light... 2025-08-31 07:17:32.536 [Thd =258] Info Default OpenLamp Transmission 2025-08-31 07:17:33.339 [Thd =322] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:17:36.149 [Thd =258] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:17:36.650 [Thd =258] Info Default CloseLamp Reflection 2025-08-31 07:17:38.944 [Thd =258] Info MMSFocus _isStop = true 2025-08-31 07:17:38.945 [Thd =302] Info Default Execute alignment 1/2 2025-08-31 07:17:44.094 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.9998028,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:17:44.094 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0 2025-08-31 07:17:44.094 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True 2025-08-31 07:17:44.216 [Thd =258] Info Default Flag:Fine1, Position:62.1909741800609,73.1356988830566 2025-08-31 07:17:53.932 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.999766,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:17:53.933 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0 2025-08-31 07:17:53.933 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True 2025-08-31 07:17:54.055 [Thd =258] Info Default Flag:Fine2, Position:-62.2092260710253,72.8832351074219 2025-08-31 07:18:02.682 [Thd =302] Info Default Execute alignment 2/2 2025-08-31 07:18:11.990 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.9976448,xOffSet:585,yOffSet:518,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:11.991 [Thd =258] Info Default D2DMatchMark ******** :errorX:-27,errorY:6 2025-08-31 07:18:13.636 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.997856,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:13.637 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True 2025-08-31 07:18:13.760 [Thd =258] Info Default Flag:Fine1, Position:62.0520590776478,72.732759552002 2025-08-31 07:18:23.467 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.9980159,xOffSet:598,yOffSet:517,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:23.467 [Thd =258] Info Default D2DMatchMark ******** :errorX:-14,errorY:5 2025-08-31 07:18:25.095 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.998265,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:25.096 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True 2025-08-31 07:18:25.220 [Thd =258] Info Default Flag:Fine2, Position:-62.3481132192891,72.7289678039551 2025-08-31 07:18:28.141 [Thd =322] Info Default Checking Mark ... 2025-08-31 07:18:37.444 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.9989333,xOffSet:613,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:37.444 [Thd =258] Info Default D2DMatchMark ******** :errorX:1,errorY:0 2025-08-31 07:18:37.444 [Thd =258] Info Default D2DMatchMark ******** :errorX:1,errorY:0,Successed:True 2025-08-31 07:18:37.568 [Thd =258] Info Default Flag:Fine1, Position:62.0500065656205,72.7265875854492 2025-08-31 07:18:47.284 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.9976497,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:47.284 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0 2025-08-31 07:18:47.284 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True 2025-08-31 07:18:47.408 [Thd =258] Info Default Flag:Fine2, Position:-62.3501695145158,72.7265908203125 2025-08-31 07:18:57.813 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.9961209,xOffSet:614,yOffSet:494,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:57.813 [Thd =258] Info Default D2DMatchMark ******** :errorX:2,errorY:-18 2025-08-31 07:18:59.457 [Thd =258] Info Default D2DSearchMark matchResult:0， score:0.9975283,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024 2025-08-31 07:18:59.457 [Thd =258] Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True 2025-08-31 07:18:59.581 [Thd =258] Info Default Flag:Fine3, Position:-62.344943170014,-68.6735947570801 2025-08-31 07:19:00.582 [Thd =258] Info Default IsAlignAngleOK fine1:62.0500065656205,72.7265875854492,fine2:-62.3501695145158,72.7265908203125 2025-08-31 07:19:00.582 [Thd =311] Info Default Height difference : 0.20 um 2025-08-31 07:19:00.582 [Thd =258] Info Default IsAlignAngleOK delta:-1.10953964248228E-05. 2025-08-31 07:19:18.526 [Thd =258] Info MMSFocus _isStop = true 2025-08-31 07:19:18.526 [Thd =299] Info Default Alignment finish 2025-08-31 07:19:18.526 [Thd =322] Info Default Chuck vacuum open 2025-08-31 07:19:19.528 [Thd =258] Info Default ChuckVac: :True 2025-08-31 07:19:20.468 [Thd =1] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:19:27.501 [Thd =1] Error Default CheckDPTaskState 检查数据准备数据问题！！ jobName: 2025-08-31 07:19:29.387 [Thd =1] Error Default CheckDPTaskState 检查数据准备数据问题！！ jobName: 2025-08-31 07:19:31.154 [Thd =1] Error Default CheckDPTaskState 检查数据准备数据问题！！ jobName: 2025-08-31 07:19:34.572 [Thd =1] Info Default Mask_Recipe 100 2025-08-31 07:19:38.616 [Thd =1] Info Default Mask_Recipe 100 2025-08-31 07:19:38.628 [Thd =1] Info Default Mask_Recipe 100 2025-08-31 07:19:38.628 [Thd =1] Info Default MaskScaleY:0.999998584566823 2025-08-31 07:19:38.628 [Thd =1] Info Default MaskScaleX:0.999998687573204,Orth_Y_BeforR:0.127063828558936 2025-08-31 07:19:38.629 [Thd =330] Info Default located_pos:(62.0500065656205, 72.7265875854492) 2025-08-31 07:19:38.629 [Thd =330] Info Default deltax_stage 0, deltay_stage:-124.400176080136. 2025-08-31 07:19:38.629 [Thd =330] Info Default MoveStageForMarkCol102 point (-62.3501695145159, 72.7265875854492), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0500065656205, 72.7265875854492). 2025-08-31 07:19:38.629 [Thd =330] Info Default located_pos:(-62.3501695145159, 72.7265875854492) 2025-08-31 07:19:38.629 [Thd =330] Info Default deltax_stage 141.400185577393, deltay_stage:0. 2025-08-31 07:19:38.629 [Thd =330] Info Default MoveStageForMarkCol101 point (62.055232910126, -68.6735980885298), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.0500065656205, 72.7265875854492). 2025-08-31 07:19:38.629 [Thd =330] Info Default deltax_stage 0, deltay_stage:-124.400176080136. 2025-08-31 07:19:38.629 [Thd =330] Info Default MoveStageForMarkCol102 point (-62.3449431700104, -68.6735980885298), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.055232910126, -68.6735980885298). 2025-08-31 07:19:38.630 [Thd =330] Info Default located_pos:(-62.3449431700104, -68.6735980885298) 2025-08-31 07:19:38.630 [Thd =330] Info Default AliPt:(62.0500065656205, 72.7265875854492), GDS2StagePt:(62.0500065656205, 72.7265875854492), XOffset:5, YOffset:5 2025-08-31 07:19:38.630 [Thd =330] Info Default AliPt:(-62.3501695145158, 72.7265908203125), GDS2StagePt:(-62.3501695145159, 72.7265875854492), XOffset:5, YOffset:5 2025-08-31 07:19:38.630 [Thd =330] Info Default AliPt:(-62.344943170014, -68.6735947570801), GDS2StagePt:(-62.3449431700104, -68.6735980885298), XOffset:5, YOffset:5 2025-08-31 07:19:38.643 [Thd =1] Info Default Mask_Recipe 100 2025-08-31 07:19:38.643 [Thd =1] Info Default MaskScaleY:0.999998584566823 2025-08-31 07:19:38.643 [Thd =1] Info Default MaskScaleX:0.999998687573204,Orth_Y_BeforR:0.127063828558936 2025-08-31 07:19:38.644 [Thd =1] Info Default deltax_stage 13.7090429921154, deltay_stage:0. 2025-08-31 07:19:38.644 [Thd =1] Info Default MoveStageForMarkCol101 point (62.050513270624, 59.0175445839696), GDS ref(5500000, 138400000), gdsObject(19209025, 138400000), stageRef(62.0500065656205, 72.7265875854492). 2025-08-31 07:19:38.644 [Thd =1] Info Default deltax_stage 0, deltay_stage:7.24279125168703. 2025-08-31 07:19:38.644 [Thd =1] Info Default MoveStageForMarkCol102 point (69.293304522311, 59.0175445839696), GDS ref(19209025, 138400000), gdsObject(19209025, 145642781), stageRef(62.050513270624, 59.0175445839696). 2025-08-31 07:19:38.644 [Thd =1] Info Default located_pos:(69.293304522311, 59.0175445839696) 2025-08-31 07:19:38.644 [Thd =1] Info Default deltax_stage 126.991690667298, deltay_stage:0. 2025-08-31 07:19:38.644 [Thd =1] Info Default MoveStageForMarkCol101 point (62.0547003524218, -54.2651031685929), GDS ref(5500000, 138400000), gdsObject(132491524, 138400000), stageRef(62.0500065656205, 72.7265875854492). 2025-08-31 07:19:38.644 [Thd =1] Info Default deltax_stage 0, deltay_stage:-131.359303930317. 2025-08-31 07:19:38.644 [Thd =1] Info Default MoveStageForMarkCol102 point (-69.3046035778951, -54.2651031685929), GDS ref(132491524, 138400000), gdsObject(132491524, 7040882), stageRef(62.0547003524218, -54.2651031685929). 2025-08-31 07:19:38.644 [Thd =1] Info Default located_pos:(-69.3046035778951, -54.2651031685929) 2025-08-31 07:19:40.429 [Thd =1] Info Default Mask_Recipe 100 2025-08-31 07:19:40.616 [Thd =1] Info Default Mask_Recipe 100 2025-08-31 07:20:25.172 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:12932.55MB VirtualMemorySize:162.2 GB 2025-08-31 07:20:25.297 [Thd =1] Info Default LineCameraStage:25 2025-08-31 07:20:25.297 [Thd =1] Info Default LineCameraStage:25 2025-08-31 07:20:25.356 [Thd =258] Info Default 设置光标定环境中，请等待...... 2025-08-31 07:20:25.356 [Thd =311] Info Default AutoLightInit******************DemarcatePoints Count:1 2025-08-31 07:20:25.357 [Thd =311] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:25.358 [Thd =311] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:25.361 [Thd =311] Info Default SetDistortionPara disaabled 2025-08-31 07:20:26.294 [Thd =311] Info MMSFocus _isStop = true 2025-08-31 07:20:26.294 [Thd =311] Info Default aSwitchIndex index:0 2025-08-31 07:20:26.294 [Thd =311] Info Default lens from ATF: 2025-08-31 07:20:26.294 [Thd =311] Info Default objCount:3 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:P200;objId:0 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:P140;objId:1 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:P100;objId:2 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:;objId:0 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:;objId:0 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:;objId:0 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:;objId:0 2025-08-31 07:20:26.294 [Thd =311] Info Default ratio:;objId:0 2025-08-31 07:20:26.294 [Thd =311] Info Default lens from system settings: 2025-08-31 07:20:26.294 [Thd =311] Info Default systemlensettings lens count:3 2025-08-31 07:20:26.295 [Thd =311] Info Default ratio:P200;objId:0 2025-08-31 07:20:26.295 [Thd =311] Info Default ratio:P140;objId:1 2025-08-31 07:20:26.295 [Thd =311] Info Default ratio:P100;objId:2 2025-08-31 07:20:26.297 [Thd =311] Info AbstractMicroscope Switch Lens:Broadcast Event 2025-08-31 07:20:26.331 [Thd =311] Info AbstractMicroscope Broadcast Event Finished 2025-08-31 07:20:26.335 [Thd =311] Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456. 2025-08-31 07:20:26.335 [Thd =311] Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0 2025-08-31 07:20:26.335 [Thd =311] Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative 2025-08-31 07:20:26.336 [Thd =311] Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1 2025-08-31 07:20:26.336 [Thd =311] Info Default BaseScanObjectLine:------------------ 2025-08-31 07:20:26.336 [Thd =311] Info Default BaseScanObjectLine:***************** 2025-08-31 07:20:26.336 [Thd =311] Info Default BaseScanObjectLine:0000000000000000 2025-08-31 07:20:26.336 [Thd =311] Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110503869843,StepStep:0.431711158589293,CosValueY:1,SinValueY:0 2025-08-31 07:20:26.585 [Thd =311] Info strip vectorBegin:(48.664917,-40.440884),VectorEnd:(43.359586,-40.440884),CaptureBegin:(46.664917,-40.440884)，CaptureEnd：(45.359586,-40.440884),StepScan:0.435110503869843 2025-08-31 07:20:26.585 [Thd =311] Info Default VectorBegin:(48.6649170158034,-40.4408839533809) 2025-08-31 07:20:27.827 [Thd =302] Warn Default 检测光源最大功率(mw):300mw 2025-08-31 07:20:27.827 [Thd =311] Info Default SetMaxPower:300 2025-08-31 07:20:28.828 [Thd =262] Info Default 打开光源，亮度：40% 2025-08-31 07:20:28.828 [Thd =327] Info Default OpenLamp Transmission 2025-08-31 07:20:28.856 [Thd =300] Info Default LaserLamp MaxPower:300,currentPower:120 2025-08-31 07:20:29.632 [Thd =302] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:20:30.358 [Thd =300] Error Default SyncSend recv cmd timeout 2025-08-31 07:20:30.829 [Thd =311] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:20:30.829 [Thd =330] Info Default 聚焦Track已关闭 2025-08-31 07:20:32.300 [Thd =311] Info MMSFocus _isStop = true 2025-08-31 07:20:32.454 [Thd =327] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:20:32.454 [Thd =327] Info Default OpenLamp Reflection 2025-08-31 07:20:33.819 [Thd =311] Info Default QuerySubstrateMode Line OK 2025-08-31 07:20:33.819 [Thd =300] Info Default 已切换到线阵聚焦模式 2025-08-31 07:20:34.261 [Thd =327] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:20:36.821 [Thd =311] Info Default SetFocusTrack OpenTrack OK 2025-08-31 07:20:36.821 [Thd =327] Info Default 聚焦Track已开启 2025-08-31 07:20:40.868 [Thd =322] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:20:40.868 [Thd =322] Info Default ChangeLightPath: False! 2025-08-31 07:20:40.868 [Thd =269] Info Default 标定中，请等待...... 2025-08-31 07:20:40.868 [Thd =300] Info Default CurrentSize:2048,2048 2025-08-31 07:20:40.868 [Thd =300] Info Default Camera size no change 2025-08-31 07:20:40.868 [Thd =320] Info Default CurrentSize:2048,2048 2025-08-31 07:20:40.868 [Thd =320] Info Default Camera size no change 2025-08-31 07:20:40.870 [Thd =300] Info Default Set camera size success 2025-08-31 07:20:40.870 [Thd =300] Info Default Current:TDIStage：TDI256，Target：TDI256 2025-08-31 07:20:40.870 [Thd =320] Info Default Set camera size success 2025-08-31 07:20:40.870 [Thd =320] Info Default Current:TDIStage：TDI216，Target：TDI216 2025-08-31 07:20:42.320 [Thd =300] Info Default Set camera parameter 2025-08-31 07:20:42.321 [Thd =300] Info Default TriggerMode is On,dont set 2025-08-31 07:20:42.321 [Thd =300] Info Default BUFFER_COUNT no change 2025-08-31 07:20:42.825 [Thd =320] Info Default Set camera parameter 2025-08-31 07:20:42.826 [Thd =320] Info Default TriggerMode is On,dont set 2025-08-31 07:20:42.826 [Thd =320] Info Default BUFFER_COUNT no change 2025-08-31 07:20:42.830 [Thd =311] Info Default scanStrips:1,LampResult:40 2025-08-31 07:20:42.831 [Thd =311] Info Default stripsIndex:0,lightIndex:0 2025-08-31 07:20:42.831 [Thd =311] Info Default strip.VectorBegin.X:48.6649170158034,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:42.871 [Thd =311] Info Default m_focusMapMode：0 2025-08-31 07:20:42.873 [Thd =311] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649170158034,EndPoint:-45.3595855041939 2025-08-31 07:20:42.873 [Thd =311] Info Default strip.VectorBegin.X:43.3595855041939,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:43.086 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:43.089 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:43.936 [Thd =311] Info Default stripsIndex:0,lightIndex:1 2025-08-31 07:20:43.936 [Thd =311] Info Default strip.VectorBegin.X:48.6649170158034,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:43.956 [Thd =302] Info Default LaserLamp MaxPower:300,currentPower:117 2025-08-31 07:20:44.357 [Thd =311] Info Default m_focusMapMode：0 2025-08-31 07:20:44.359 [Thd =311] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649170158034,EndPoint:-45.3595855041939 2025-08-31 07:20:44.359 [Thd =311] Info Default strip.VectorBegin.X:43.3595855041939,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:44.572 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:44.575 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:45.447 [Thd =311] Info Default stripsIndex:0,lightIndex:2 2025-08-31 07:20:45.447 [Thd =311] Info Default strip.VectorBegin.X:48.6649170158034,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:45.457 [Thd =302] Error Default SyncSend recv cmd timeout 2025-08-31 07:20:45.489 [Thd =327] Info Default LaserLamp MaxPower:300,currentPower:114 2025-08-31 07:20:45.864 [Thd =311] Info Default m_focusMapMode：0 2025-08-31 07:20:45.867 [Thd =311] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649170158034,EndPoint:-45.3595855041939 2025-08-31 07:20:45.867 [Thd =311] Info Default strip.VectorBegin.X:43.3595855041939,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:46.084 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:46.087 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:46.941 [Thd =311] Info Default AutoLightReturn:--------------SL---------- 2025-08-31 07:20:46.976 [Thd =311] Info Default AutoLightReturn:43,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1 2025-08-31 07:20:46.976 [Thd =311] Info Default stripsIndex:0,lightIndex:0 2025-08-31 07:20:46.976 [Thd =311] Info Default strip.VectorBegin.X:48.6649170158034,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:46.990 [Thd =327] Error Default SyncSend recv cmd timeout 2025-08-31 07:20:47.006 [Thd =163] Info Default LaserLamp MaxPower:300,currentPower:129 2025-08-31 07:20:47.396 [Thd =311] Info Default m_focusMapMode：0 2025-08-31 07:20:47.397 [Thd =311] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649170158034,EndPoint:-45.3595855041939 2025-08-31 07:20:47.398 [Thd =311] Info Default strip.VectorBegin.X:43.3595855041939,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:47.612 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:47.615 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:48.469 [Thd =311] Info Default stripsIndex:0,lightIndex:1 2025-08-31 07:20:48.469 [Thd =311] Info Default strip.VectorBegin.X:48.6649170158034,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:48.507 [Thd =163] Error Default SyncSend recv cmd timeout 2025-08-31 07:20:48.539 [Thd =262] Info Default LaserLamp MaxPower:300,currentPower:126 2025-08-31 07:20:48.889 [Thd =311] Info Default m_focusMapMode：0 2025-08-31 07:20:48.890 [Thd =311] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649170158034,EndPoint:-45.3595855041939 2025-08-31 07:20:48.891 [Thd =311] Info Default strip.VectorBegin.X:43.3595855041939,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:49.105 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:49.108 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:49.954 [Thd =311] Info Default stripsIndex:0,lightIndex:2 2025-08-31 07:20:49.954 [Thd =311] Info Default strip.VectorBegin.X:48.6649170158034,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:50.040 [Thd =262] Error Default SyncSend recv cmd timeout 2025-08-31 07:20:50.056 [Thd =163] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:20:50.390 [Thd =311] Info Default m_focusMapMode：0 2025-08-31 07:20:50.392 [Thd =311] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649170158034,EndPoint:-45.3595855041939 2025-08-31 07:20:50.392 [Thd =311] Info Default strip.VectorBegin.X:43.3595855041939,strip.VectorBegin.Y:-40.4408839533809 2025-08-31 07:20:50.606 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:50.609 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:51.478 [Thd =311] Info Default AutoLightReturn:--------------SL---------- 2025-08-31 07:20:51.558 [Thd =163] Error Default SyncSend recv cmd timeout 2025-08-31 07:20:51.797 [Thd =311] Info Default AutoLightReturn:41,trans_result:0,ref_result:2，stripsIndex：0,scanStrips.Count:1 2025-08-31 07:20:51.797 [Thd =311] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:51.797 [Thd =311] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:51.797 [Thd =311] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:51.798 [Thd =311] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:20:51.798 [Thd =311] Info Default SLLightCalibration.OpticalCalibrationScan() Result: dilation_value:2.3 2025-08-31 07:20:51.999 [Thd =311] Info Default Light Complete 5,ResultMessge:结果:41,下调透射光台阶数 2025-08-31 07:20:52.045 [Thd =269] Warn Default 还原光源最大功率 2025-08-31 07:20:52.045 [Thd =299] Info Default LaserLamp MaxPower:300 2025-08-31 07:20:53.046 [Thd =300] Info Default OpenLamp Transmission 2025-08-31 07:20:53.850 [Thd =311] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:20:53.854 [Thd =269] Info MMSFocus _isStop = true 2025-08-31 07:20:54.853 [Thd =300] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:20:54.853 [Thd =300] Info Default CloseLamp Reflection 2025-08-31 07:20:55.869 [Thd =258] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:20:56.362 [Thd =269] Info Default QuerySubstrateMode Area OK 2025-08-31 07:20:56.362 [Thd =311] Info Default 已切换到面阵聚焦模式 2025-08-31 07:20:57.370 [Thd =258] Error Default SyncSend recv cmd timeout 2025-08-31 07:20:58.364 [Thd =269] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:20:58.364 [Thd =311] Info Default 聚焦Track已关闭 2025-08-31 07:21:05.125 [Thd =330] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:21:05.316 [Thd =299] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:b__37_1 After Memory usage:12953.6MB VirtualMemorySize:162.2 GB 2025-08-31 07:22:14.036 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:12980.27MB VirtualMemorySize:162.2 GB 2025-08-31 07:22:14.161 [Thd =1] Info Default LineCameraStage:25 2025-08-31 07:22:14.161 [Thd =1] Info Default LineCameraStage:25 2025-08-31 07:22:14.239 [Thd =322] Info Default 设置光标定环境中，请等待...... 2025-08-31 07:22:14.239 [Thd =258] Info Default AutoLightInit******************DemarcatePoints Count:1 2025-08-31 07:22:14.240 [Thd =258] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:14.240 [Thd =258] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:14.244 [Thd =258] Info Default SetDistortionPara disaabled 2025-08-31 07:22:15.211 [Thd =258] Info MMSFocus _isStop = true 2025-08-31 07:22:15.211 [Thd =258] Info Default aSwitchIndex index:0 2025-08-31 07:22:15.211 [Thd =258] Info Default lens from ATF: 2025-08-31 07:22:15.211 [Thd =258] Info Default objCount:3 2025-08-31 07:22:15.211 [Thd =258] Info Default ratio:P200;objId:0 2025-08-31 07:22:15.211 [Thd =258] Info Default ratio:P140;objId:1 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:P100;objId:2 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:;objId:0 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:;objId:0 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:;objId:0 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:;objId:0 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:;objId:0 2025-08-31 07:22:15.212 [Thd =258] Info Default lens from system settings: 2025-08-31 07:22:15.212 [Thd =258] Info Default systemlensettings lens count:3 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:P200;objId:0 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:P140;objId:1 2025-08-31 07:22:15.212 [Thd =258] Info Default ratio:P100;objId:2 2025-08-31 07:22:15.215 [Thd =258] Info AbstractMicroscope Switch Lens:Broadcast Event 2025-08-31 07:22:15.250 [Thd =258] Info AbstractMicroscope Broadcast Event Finished 2025-08-31 07:22:15.253 [Thd =258] Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456. 2025-08-31 07:22:15.253 [Thd =258] Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0 2025-08-31 07:22:15.254 [Thd =258] Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative 2025-08-31 07:22:15.254 [Thd =258] Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1 2025-08-31 07:22:15.254 [Thd =258] Info Default BaseScanObjectLine:------------------ 2025-08-31 07:22:15.254 [Thd =258] Info Default BaseScanObjectLine:***************** 2025-08-31 07:22:15.254 [Thd =258] Info Default BaseScanObjectLine:0000000000000000 2025-08-31 07:22:15.254 [Thd =258] Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110503869843,StepStep:0.431711158589293,CosValueY:1,SinValueY:0 2025-08-31 07:22:15.499 [Thd =258] Info strip vectorBegin:(48.664904,-40.44089),VectorEnd:(43.359573,-40.44089),CaptureBegin:(46.664904,-40.44089)，CaptureEnd：(45.359573,-40.44089),StepScan:0.435110503869843 2025-08-31 07:22:15.499 [Thd =258] Info Default VectorBegin:(48.6649043815261,-40.4408898127559) 2025-08-31 07:22:16.733 [Thd =327] Warn Default 检测光源最大功率(mw):300mw 2025-08-31 07:22:16.733 [Thd =258] Info Default SetMaxPower:300 2025-08-31 07:22:17.734 [Thd =311] Info Default 打开光源，亮度：41% 2025-08-31 07:22:17.734 [Thd =269] Info Default OpenLamp Transmission 2025-08-31 07:22:17.763 [Thd =299] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:22:18.537 [Thd =300] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:22:19.264 [Thd =299] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:19.735 [Thd =258] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:22:19.735 [Thd =163] Info Default 聚焦Track已关闭 2025-08-31 07:22:21.218 [Thd =258] Info MMSFocus _isStop = true 2025-08-31 07:22:21.348 [Thd =269] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:22:21.348 [Thd =269] Info Default OpenLamp Reflection 2025-08-31 07:22:22.735 [Thd =258] Info Default QuerySubstrateMode Line OK 2025-08-31 07:22:22.735 [Thd =311] Info Default 已切换到线阵聚焦模式 2025-08-31 07:22:23.154 [Thd =269] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:22:25.737 [Thd =258] Info Default SetFocusTrack OpenTrack OK 2025-08-31 07:22:25.737 [Thd =327] Info Default 聚焦Track已开启 2025-08-31 07:22:29.781 [Thd =320] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:22:29.781 [Thd =320] Info Default ChangeLightPath: False! 2025-08-31 07:22:29.781 [Thd =302] Info Default 标定中，请等待...... 2025-08-31 07:22:29.781 [Thd =299] Info Default CurrentSize:2048,2048 2025-08-31 07:22:29.781 [Thd =299] Info Default Camera size no change 2025-08-31 07:22:29.781 [Thd =163] Info Default CurrentSize:2048,2048 2025-08-31 07:22:29.781 [Thd =163] Info Default Camera size no change 2025-08-31 07:22:29.783 [Thd =299] Info Default Set camera size success 2025-08-31 07:22:29.783 [Thd =299] Info Default Current:TDIStage：TDI256，Target：TDI256 2025-08-31 07:22:29.783 [Thd =163] Info Default Set camera size success 2025-08-31 07:22:29.783 [Thd =163] Info Default Current:TDIStage：TDI216，Target：TDI208 2025-08-31 07:22:30.762 [Thd =299] Info Default Set camera parameter 2025-08-31 07:22:30.763 [Thd =299] Info Default TriggerMode is On,dont set 2025-08-31 07:22:30.763 [Thd =299] Info Default BUFFER_COUNT no change 2025-08-31 07:22:31.742 [Thd =163] Info Default Set camera parameter 2025-08-31 07:22:31.742 [Thd =163] Info Default TriggerMode is On,dont set 2025-08-31 07:22:31.742 [Thd =163] Info Default BUFFER_COUNT no change 2025-08-31 07:22:31.747 [Thd =258] Info Default scanStrips:1,LampResult:41 2025-08-31 07:22:31.747 [Thd =258] Info Default stripsIndex:0,lightIndex:0 2025-08-31 07:22:31.747 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:31.786 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:31.789 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:31.789 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:32.015 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:32.018 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:32.874 [Thd =258] Info Default stripsIndex:0,lightIndex:1 2025-08-31 07:22:32.874 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:32.888 [Thd =327] Info Default LaserLamp MaxPower:300,currentPower:120 2025-08-31 07:22:33.301 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:33.303 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:33.303 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:33.530 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:33.533 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:34.389 [Thd =327] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:34.395 [Thd =258] Info Default stripsIndex:0,lightIndex:2 2025-08-31 07:22:34.395 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:34.422 [Thd =302] Info Default LaserLamp MaxPower:300,currentPower:117 2025-08-31 07:22:34.824 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:34.826 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:34.826 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:35.039 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:35.042 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:35.898 [Thd =258] Info Default AutoLightReturn:--------------SL---------- 2025-08-31 07:22:35.923 [Thd =302] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:35.949 [Thd =258] Info Default AutoLightReturn:45,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1 2025-08-31 07:22:35.949 [Thd =258] Info Default stripsIndex:0,lightIndex:0 2025-08-31 07:22:35.949 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:35.965 [Thd =311] Info Default LaserLamp MaxPower:300,currentPower:135 2025-08-31 07:22:36.376 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:36.378 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:36.378 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:36.595 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:36.597 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:37.448 [Thd =258] Info Default stripsIndex:0,lightIndex:1 2025-08-31 07:22:37.448 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:37.467 [Thd =311] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:37.499 [Thd =262] Info Default LaserLamp MaxPower:300,currentPower:132 2025-08-31 07:22:37.859 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:37.861 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:37.861 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:38.074 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:38.077 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:38.932 [Thd =258] Info Default stripsIndex:0,lightIndex:2 2025-08-31 07:22:38.932 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:39.000 [Thd =262] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:39.016 [Thd =327] Info Default LaserLamp MaxPower:300,currentPower:129 2025-08-31 07:22:39.354 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:39.357 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:39.357 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:39.575 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:39.577 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:40.433 [Thd =258] Info Default AutoLightReturn:--------------SL---------- 2025-08-31 07:22:40.470 [Thd =258] Info Default AutoLightReturn:42,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1 2025-08-31 07:22:40.470 [Thd =258] Info Default stripsIndex:0,lightIndex:0 2025-08-31 07:22:40.470 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:40.518 [Thd =327] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:40.550 [Thd =320] Info Default LaserLamp MaxPower:300,currentPower:126 2025-08-31 07:22:40.896 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:40.897 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:40.898 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:41.200 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:41.202 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:41.976 [Thd =258] Info Default stripsIndex:0,lightIndex:1 2025-08-31 07:22:41.976 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:42.051 [Thd =320] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:42.067 [Thd =322] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:22:42.390 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:42.393 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:42.393 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:42.609 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:42.613 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:43.459 [Thd =258] Info Default stripsIndex:0,lightIndex:2 2025-08-31 07:22:43.459 [Thd =258] Info Default strip.VectorBegin.X:48.6649043815261,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:43.568 [Thd =322] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:43.601 [Thd =262] Info Default LaserLamp MaxPower:300,currentPower:120 2025-08-31 07:22:43.882 [Thd =258] Info Default m_focusMapMode：0 2025-08-31 07:22:43.884 [Thd =258] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6649043815261,EndPoint:-45.3595728699166 2025-08-31 07:22:43.884 [Thd =258] Info Default strip.VectorBegin.X:43.3595728699166,strip.VectorBegin.Y:-40.4408898127559 2025-08-31 07:22:44.097 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:44.100 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:44.946 [Thd =258] Info Default AutoLightReturn:--------------SL---------- 2025-08-31 07:22:45.101 [Thd =262] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:45.284 [Thd =258] Info Default AutoLightReturn:41,trans_result:0,ref_result:0，stripsIndex：0,scanStrips.Count:1 2025-08-31 07:22:45.284 [Thd =258] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:45.284 [Thd =258] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:45.284 [Thd =258] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:45.284 [Thd =258] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\OpticalCalibration 2025-08-31 07:22:45.285 [Thd =258] Info Default SLLightCalibration.OpticalCalibrationScan() Result: dilation_value:2.7 2025-08-31 07:22:45.486 [Thd =258] Info Default Light Complete 5,ResultMessge:结果:41 2025-08-31 07:22:45.532 [Thd =258] Warn Default 还原光源最大功率 2025-08-31 07:22:45.532 [Thd =332] Info Default LaserLamp MaxPower:300 2025-08-31 07:22:46.533 [Thd =300] Info Default OpenLamp Transmission 2025-08-31 07:22:46.753 [Thd =311] Info MMSFocus _isStop = true 2025-08-31 07:22:47.348 [Thd =258] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:22:48.339 [Thd =300] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:22:48.339 [Thd =300] Info Default CloseLamp Reflection 2025-08-31 07:22:49.259 [Thd =311] Info Default QuerySubstrateMode Area OK 2025-08-31 07:22:49.259 [Thd =258] Info Default 已切换到面阵聚焦模式 2025-08-31 07:22:49.359 [Thd =299] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:22:50.861 [Thd =299] Error Default SyncSend recv cmd timeout 2025-08-31 07:22:51.260 [Thd =311] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:22:51.260 [Thd =262] Info Default 聚焦Track已关闭 2025-08-31 07:22:58.580 [Thd =163] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:22:58.756 [Thd =332] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:b__37_1 After Memory usage:13014.18MB VirtualMemorySize:162.2 GB 2025-08-31 07:22:58.759 [Thd =262] Info Default 光标定完成！ 2025-08-31 07:23:04.169 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:13014.52MB VirtualMemorySize:162.2 GB 2025-08-31 07:23:04.514 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click End Memory usage:13014.55MB VirtualMemorySize:162.2 GB 2025-08-31 07:23:06.979 [Thd =320] Info Default 设置平场校正环境中...... 2025-08-31 07:23:06.979 [Thd =327] Info Default Flatfield Corrention Init****************** 2025-08-31 07:23:07.585 [Thd =327] Info MMSFocus _isStop = true 2025-08-31 07:23:07.585 [Thd =327] Info Default aSwitchIndex index:0 2025-08-31 07:23:07.585 [Thd =327] Info Default lens from ATF: 2025-08-31 07:23:07.585 [Thd =327] Info Default objCount:3 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:P200;objId:0 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:P140;objId:1 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:P100;objId:2 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:23:07.585 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:23:07.586 [Thd =327] Info Default lens from system settings: 2025-08-31 07:23:07.586 [Thd =327] Info Default systemlensettings lens count:3 2025-08-31 07:23:07.586 [Thd =327] Info Default ratio:P200;objId:0 2025-08-31 07:23:07.586 [Thd =327] Info Default ratio:P140;objId:1 2025-08-31 07:23:07.586 [Thd =327] Info Default ratio:P100;objId:2 2025-08-31 07:23:07.588 [Thd =327] Info AbstractMicroscope Switch Lens:Broadcast Event 2025-08-31 07:23:07.622 [Thd =327] Info AbstractMicroscope Broadcast Event Finished 2025-08-31 07:23:07.625 [Thd =327] Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456. 2025-08-31 07:23:07.626 [Thd =327] Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0 2025-08-31 07:23:07.626 [Thd =327] Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative 2025-08-31 07:23:07.626 [Thd =327] Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1 2025-08-31 07:23:07.626 [Thd =327] Info Default BaseScanObjectLine:------------------ 2025-08-31 07:23:07.626 [Thd =327] Info Default BaseScanObjectLine:***************** 2025-08-31 07:23:07.626 [Thd =327] Info Default BaseScanObjectLine:0000000000000000 2025-08-31 07:23:07.626 [Thd =327] Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110503869843,StepStep:0.431711158589293,CosValueY:1,SinValueY:0 2025-08-31 07:23:07.873 [Thd =327] Info strip vectorBegin:(48.664877,-40.440889),VectorEnd:(43.359545,-40.440889),CaptureBegin:(46.664877,-40.440889)，CaptureEnd：(45.359545,-40.440889),StepScan:0.435110503869843 2025-08-31 07:23:07.904 [Thd =327] Info strip vectorBegin:(48.664895,-40.440887),VectorEnd:(43.359564,-40.440887),CaptureBegin:(46.664895,-40.440887)，CaptureEnd：(45.359564,-40.440887),StepScan:0.435110503869843 2025-08-31 07:23:08.605 [Thd =215] Warn Default 检测光源最大功率(mw):300mw 2025-08-31 07:23:08.605 [Thd =327] Info Default SetMaxPower:300 2025-08-31 07:23:09.606 [Thd =311] Info Default 打开光源，亮度：41% 2025-08-31 07:23:09.606 [Thd =320] Info Default OpenLamp Transmission 2025-08-31 07:23:09.636 [Thd =299] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:23:10.410 [Thd =215] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:23:11.137 [Thd =299] Error Default SyncSend recv cmd timeout 2025-08-31 07:23:11.607 [Thd =327] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:23:11.607 [Thd =299] Info Default 聚焦Track已关闭 2025-08-31 07:23:13.240 [Thd =320] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:23:13.240 [Thd =320] Info Default OpenLamp Reflection 2025-08-31 07:23:13.591 [Thd =327] Info MMSFocus _isStop = true 2025-08-31 07:23:15.058 [Thd =320] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:23:15.096 [Thd =327] Info Default QuerySubstrateMode Line OK 2025-08-31 07:23:15.096 [Thd =311] Info Default 已切换到线阵聚焦模式 2025-08-31 07:23:19.185 [Thd =327] Info Default SetFocusTrack OpenTrack OK 2025-08-31 07:23:19.185 [Thd =320] Info Default 聚焦Track已开启 2025-08-31 07:23:23.096 [Thd =262] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:23:23.096 [Thd =262] Info Default ChangeLightPath: False! 2025-08-31 07:23:23.096 [Thd =327] Info Default OpenLamp Transmission 2025-08-31 07:23:23.096 [Thd =322] Info Default Open lamp，Power:41% 2025-08-31 07:23:23.899 [Thd =332] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:23:24.112 [Thd =327] Info Default OpenLamp Reflection 2025-08-31 07:23:25.922 [Thd =327] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:23:25.927 [Thd =163] Info Default 扫描图片...... 2025-08-31 07:23:25.927 [Thd =215] Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:256 2025-08-31 07:23:25.927 [Thd =215] Info Default CurrentSize:2048,2048 2025-08-31 07:23:25.928 [Thd =215] Info Default Camera size no change 2025-08-31 07:23:25.928 [Thd =327] Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:208 2025-08-31 07:23:25.928 [Thd =327] Info Default CurrentSize:2048,2048 2025-08-31 07:23:25.928 [Thd =327] Info Default Camera size no change 2025-08-31 07:23:25.928 [Thd =320] Info Default 平场校正中,请等待 ...... 2025-08-31 07:23:25.929 [Thd =215] Info Default Set camera size success 2025-08-31 07:23:25.929 [Thd =215] Info Default Current:TDIStage：TDI256，Target：TDI256 2025-08-31 07:23:25.929 [Thd =327] Info Default Set camera size success 2025-08-31 07:23:25.929 [Thd =327] Info Default Current:TDIStage：TDI208，Target：TDI208 2025-08-31 07:23:27.381 [Thd =215] Info Default Set camera parameter 2025-08-31 07:23:27.381 [Thd =215] Info Default TriggerMode is On,dont set 2025-08-31 07:23:27.382 [Thd =215] Info Default BUFFER_COUNT no change 2025-08-31 07:23:27.885 [Thd =327] Info Default Set camera parameter 2025-08-31 07:23:27.885 [Thd =327] Info Default TriggerMode is On,dont set 2025-08-31 07:23:27.885 [Thd =327] Info Default BUFFER_COUNT no change 2025-08-31 07:23:32.888 [Thd =327] Info Default FlatfieldCorrention scanStrips:2,Intensity:41 2025-08-31 07:23:32.888 [Thd =327] Info Default FlatfieldCorrention stripsIndex:0,lightIndex:0,Light:41 2025-08-31 07:23:32.888 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:48.6648767936355,strip.VectorBegin.Y:-40.4408889582637 2025-08-31 07:23:33.219 [Thd =327] Info Default m_focusMapMode：0 2025-08-31 07:23:33.220 [Thd =327] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6648767936355,EndPoint:-45.3595452820259 2025-08-31 07:23:33.221 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:43.3595452820259,strip.VectorBegin.Y:-40.4408889582637 2025-08-31 07:23:33.444 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\Flatfield 2025-08-31 07:23:44.293 [Thd =327] Info Default FlatfieldCorrention stripsIndex:0,lightIndex:1,Light:40 2025-08-31 07:23:44.293 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:48.6648767936355,strip.VectorBegin.Y:-40.4408889582637 2025-08-31 07:23:44.307 [Thd =262] Info Default LaserLamp MaxPower:300,currentPower:120 2025-08-31 07:23:44.733 [Thd =327] Info Default m_focusMapMode：0 2025-08-31 07:23:44.734 [Thd =327] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6648767936355,EndPoint:-45.3595452820259 2025-08-31 07:23:44.735 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:43.3595452820259,strip.VectorBegin.Y:-40.4408889582637 2025-08-31 07:23:44.945 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\Flatfield 2025-08-31 07:23:45.808 [Thd =262] Error Default SyncSend recv cmd timeout 2025-08-31 07:23:55.781 [Thd =327] Info Default FlatfieldCorrention stripsIndex:0,lightIndex:2,Light:41 2025-08-31 07:23:55.781 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:48.6648767936355,strip.VectorBegin.Y:-40.4408889582637 2025-08-31 07:23:55.809 [Thd =320] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:23:56.205 [Thd =327] Info Default m_focusMapMode：0 2025-08-31 07:23:56.206 [Thd =327] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6648767936355,EndPoint:-45.3595452820259 2025-08-31 07:23:56.207 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:43.3595452820259,strip.VectorBegin.Y:-40.4408889582637 2025-08-31 07:23:56.417 [Thd =34] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\Flatfield 2025-08-31 07:23:57.310 [Thd =320] Error Default SyncSend recv cmd timeout 2025-08-31 07:24:07.461 [Thd =327] Info Default FlatfieldCorrention stripsIndex:1,lightIndex:0,Light:41 2025-08-31 07:24:07.461 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:48.6648951652175,strip.VectorBegin.Y:-40.4408872797969 2025-08-31 07:24:07.885 [Thd =327] Info Default m_focusMapMode：0 2025-08-31 07:24:07.887 [Thd =327] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6648951652175,EndPoint:-45.359563653608 2025-08-31 07:24:07.887 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:43.359563653608,strip.VectorBegin.Y:-40.4408872797969 2025-08-31 07:24:08.098 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\Flatfield 2025-08-31 07:24:08.935 [Thd =327] Info Default FlatfieldCorrention stripsIndex:1,lightIndex:1,Light:40 2025-08-31 07:24:08.935 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:48.6648951652175,strip.VectorBegin.Y:-40.4408872797969 2025-08-31 07:24:08.958 [Thd =322] Info Default LaserLamp MaxPower:300,currentPower:120 2025-08-31 07:24:09.361 [Thd =327] Info Default m_focusMapMode：0 2025-08-31 07:24:09.363 [Thd =327] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6648951652175,EndPoint:-45.359563653608 2025-08-31 07:24:09.363 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:43.359563653608,strip.VectorBegin.Y:-40.4408872797969 2025-08-31 07:24:09.575 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\Flatfield 2025-08-31 07:24:10.459 [Thd =322] Error Default SyncSend recv cmd timeout 2025-08-31 07:24:20.409 [Thd =327] Info Default FlatfieldCorrention stripsIndex:1,lightIndex:2,Light:41 2025-08-31 07:24:20.409 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:48.6648951652175,strip.VectorBegin.Y:-40.4408872797969 2025-08-31 07:24:20.424 [Thd =262] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:24:20.831 [Thd =327] Info Default m_focusMapMode：0 2025-08-31 07:24:20.832 [Thd =327] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-46.6648951652175,EndPoint:-45.359563653608 2025-08-31 07:24:20.832 [Thd =327] Info Default FlatfieldCorrention strip.VectorBegin.X:43.359563653608,strip.VectorBegin.Y:-40.4408872797969 2025-08-31 07:24:21.042 [Thd =33] Info DirPath D:\VPTEK_AOI\StormData\Setups\6268355-YXC\rcp_DB_1\Flatfield 2025-08-31 07:24:21.925 [Thd =262] Error Default SyncSend recv cmd timeout 2025-08-31 07:24:32.079 [Thd =299] Warn Default 还原光源最大功率 2025-08-31 07:24:32.079 [Thd =327] Info Default LaserLamp MaxPower:300 2025-08-31 07:24:33.080 [Thd =332] Info Default OpenLamp Transmission 2025-08-31 07:24:33.249 [Thd =322] Info MMSFocus _isStop = true 2025-08-31 07:24:33.884 [Thd =320] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:24:34.895 [Thd =332] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:24:34.895 [Thd =332] Info Default CloseLamp Reflection 2025-08-31 07:24:35.766 [Thd =322] Info Default QuerySubstrateMode Area OK 2025-08-31 07:24:35.766 [Thd =215] Info Default 已切换到面阵聚焦模式 2025-08-31 07:24:35.929 [Thd =258] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:24:37.430 [Thd =258] Error Default SyncSend recv cmd timeout 2025-08-31 07:24:37.767 [Thd =322] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:24:37.767 [Thd =258] Info Default 聚焦Track已关闭 2025-08-31 07:24:45.093 [Thd =299] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:24:45.093 [Thd =322] Info Default 平场校正中,请等待 ...... 2025-08-31 07:24:46.204 [Thd =262] Info Default 校正完成 2025-08-31 07:24:50.623 [Thd =1] Info flatfieldbtn Ok_Click begin 2025-08-31 07:24:50.623 [Thd =1] Info FlatFieldConfirm FlatFieldConfirm begin 2025-08-31 07:24:50.626 [Thd =1] Info FlatFieldConfirm ptr_T_collect Marshal.Copy begin 2025-08-31 07:24:50.626 [Thd =1] Info FlatFieldConfirm ptr_T_collect Marshal.Copy end 2025-08-31 07:24:50.626 [Thd =1] Info Default SLLightCalibration.OpticalCalibrationScan() Result: dilation_value:2.7 2025-08-31 07:24:50.626 [Thd =1] Info FlatFieldConfirm FlatFieldConfirm end 2025-08-31 07:24:50.626 [Thd =1] Info ExecuteSuccess begin 2025-08-31 07:24:50.626 [Thd =1] Info ExecuteSuccess end 2025-08-31 07:24:52.331 [Thd =1] Info flatfield btnOk_Click end 2025-08-31 07:25:41.695 [Thd =1] Info Default LineCameraStage:25 2025-08-31 07:25:41.937 [Thd =1] Info Default ModuleBaseControl_Loaded：WaferStagePoint:55.3658599885461,-60.8333075866699,,,AFCalibrationPoint:, 2025-08-31 07:25:43.559 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:Make0Calibration Before Memory usage:13007.62MB VirtualMemorySize:162.2 GB 2025-08-31 07:25:43.581 [Thd =209] Info Default LineCameraStage:25 2025-08-31 07:25:43.581 [Thd =300] Info Default CurrentSize:2048,2048 2025-08-31 07:25:43.581 [Thd =300] Info Default Camera size no change 2025-08-31 07:25:43.582 [Thd =320] Info Default CurrentSize:2048,2048 2025-08-31 07:25:43.582 [Thd =320] Info Default Camera size no change 2025-08-31 07:25:43.583 [Thd =300] Info Default Set camera size success 2025-08-31 07:25:43.583 [Thd =300] Info Default Current:TDIStage：TDI256，Target：TDI256 2025-08-31 07:25:43.583 [Thd =320] Info Default Set camera size success 2025-08-31 07:25:43.583 [Thd =320] Info Default Current:TDIStage：TDI208，Target：TDI208 2025-08-31 07:25:45.034 [Thd =300] Info Default Set camera parameter 2025-08-31 07:25:45.034 [Thd =300] Info Default TriggerMode is On,dont set 2025-08-31 07:25:45.034 [Thd =300] Info Default BUFFER_COUNT no change 2025-08-31 07:25:45.537 [Thd =320] Info Default Set camera parameter 2025-08-31 07:25:45.538 [Thd =320] Info Default TriggerMode is On,dont set 2025-08-31 07:25:45.538 [Thd =320] Info Default BUFFER_COUNT no change 2025-08-31 07:25:45.549 [Thd =209] Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456. 2025-08-31 07:25:45.549 [Thd =209] Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0 2025-08-31 07:25:45.549 [Thd =209] Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative 2025-08-31 07:25:45.549 [Thd =209] Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1 2025-08-31 07:25:45.549 [Thd =209] Info Default BaseScanObjectLine:------------------ 2025-08-31 07:25:45.549 [Thd =209] Info Default BaseScanObjectLine:***************** 2025-08-31 07:25:45.549 [Thd =209] Info Default BaseScanObjectLine:0000000000000000 2025-08-31 07:25:45.549 [Thd =209] Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110503869843,StepStep:0.431711158589293,CosValueY:1,SinValueY:0 2025-08-31 07:25:45.796 [Thd =209] Info strip vectorBegin:(58.025342,-60.982626),VectorEnd:(52.720011,-60.982626),CaptureBegin:(56.025342,-60.982626)，CaptureEnd：(54.720011,-60.982626),StepScan:0.435110503869843 2025-08-31 07:25:45.796 [Thd =209] Info Default Calibreation AreaToLinePoint:(55.5902318935461,-60.9826257746699) 2025-08-31 07:25:45.797 [Thd =300] Warn Default 检测光源最大功率(mw):300mw 2025-08-31 07:25:45.797 [Thd =209] Info Default SetMaxPower:300 2025-08-31 07:25:46.797 [Thd =258] Info Default 打开光源，亮度：41% 2025-08-31 07:25:46.797 [Thd =327] Info Default OpenLamp Transmission 2025-08-31 07:25:46.824 [Thd =163] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:25:47.601 [Thd =300] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:25:48.143 [Thd =209] Info MMSFocus _isStop = true 2025-08-31 07:25:48.325 [Thd =163] Error Default SyncSend recv cmd timeout 2025-08-31 07:25:49.648 [Thd =209] Info Default QuerySubstrateMode Line OK 2025-08-31 07:25:49.648 [Thd =163] Info Default 已切换到线阵聚焦模式 2025-08-31 07:25:50.410 [Thd =327] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:25:50.410 [Thd =327] Info Default OpenLamp Reflection 2025-08-31 07:25:52.217 [Thd =327] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:25:58.807 [Thd =320] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:25:58.807 [Thd =320] Info Default ChangeLightPath: False! 2025-08-31 07:25:58.807 [Thd =258] Info Default 设置Make0标定环境中,请等待...... 2025-08-31 07:25:58.807 [Thd =332] Info Default 标定中，请稍等...... 2025-08-31 07:26:00.810 [Thd =209] Info MMSFocus _isStop = true 2025-08-31 07:26:01.932 [Thd =299] Warn Default Optimum:0.500um 2025-08-31 07:26:04.601 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:04.603 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:05.821 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:05.823 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:07.027 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:07.028 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:08.255 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:08.258 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:09.486 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:09.488 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:10.702 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:10.704 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:11.921 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:11.923 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:13.154 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:13.155 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:14.382 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:14.384 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:15.616 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:15.619 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:16.848 [Thd =209] Info Default m_focusMapMode：0 2025-08-31 07:26:16.850 [Thd =209] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-56.025342397416,EndPoint:-54.7200108858064 2025-08-31 07:26:17.424 [Thd =209] Info Default FitPosition:0.612463508592892,score:164.06159926879 2025-08-31 07:26:17.424 [Thd =209] Info Default FitPosition:0.317458373724411,score:516.598505269525 2025-08-31 07:26:17.424 [Thd =258] Info Default Restore,Please wait...... 2025-08-31 07:26:17.424 [Thd =209] Info Default LaserLamp MaxPower:300 2025-08-31 07:26:17.425 [Thd =300] Warn Default 还原光源最大功率 2025-08-31 07:26:19.789 [Thd =258] Info Default OpenLamp Transmission 2025-08-31 07:26:19.790 [Thd =215] Info MMSFocus _isStop = true 2025-08-31 07:26:20.595 [Thd =332] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:26:21.600 [Thd =258] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:26:21.600 [Thd =258] Info Default CloseLamp Reflection 2025-08-31 07:26:22.631 [Thd =299] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:26:24.132 [Thd =299] Error Default SyncSend recv cmd timeout 2025-08-31 07:26:31.814 [Thd =322] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:26:32.042 [Thd =300] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:b__23_1 End Memory usage:12946.18MB VirtualMemorySize:162.2 GB 2025-08-31 07:26:36.745 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:ButtonMake_Click Before Memory usage:12946.11MB VirtualMemorySize:162.2 GB 2025-08-31 07:26:36.988 [Thd =1] Info Default make0 AreaToLinePoint:(55.5902318935461,-60.9826257746699) 2025-08-31 07:26:37.832 [Thd =327] Info MMSFocus _isStop = true 2025-08-31 07:26:40.992 [Thd =327] Info Default 保存AF标定结果成功！ 2025-08-31 07:26:41.422 [Thd =320] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0+<>c__DisplayClass33_0MethodName:b__1 End Memory usage:12945.19MB VirtualMemorySize:162.2 GB 2025-08-31 07:26:41.422 [Thd =299] Info Default SavePoint：WaferStagePoint:55.3658599885461,-60.8333075866699,,,AFCalibrationPoint:133559898.315751,117720966.059813 2025-08-31 07:26:45.824 [Thd =300] Info Default QuerySubstrateMode Area OK 2025-08-31 07:26:45.824 [Thd =215] Info Default 已切换到面阵聚焦模式 2025-08-31 07:26:47.719 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnXYCalib_Click Before Memory usage:12945.16MB VirtualMemorySize:162.2 GB 2025-08-31 07:26:47.826 [Thd =300] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:26:47.826 [Thd =299] Info Default 聚焦Track已关闭 2025-08-31 07:26:47.904 [Thd =332] Info Default 设置RTB 标定环境中,请等待 ...... 2025-08-31 07:26:47.905 [Thd =327] Info Default AutoLightInit******************DemarcatePoints Count:1 2025-08-31 07:26:47.908 [Thd =327] Info Default SetDistortionPara disaabled 2025-08-31 07:26:48.432 [Thd =327] Info MMSFocus _isStop = true 2025-08-31 07:26:48.433 [Thd =327] Info Default aSwitchIndex index:0 2025-08-31 07:26:48.433 [Thd =327] Info Default lens from ATF: 2025-08-31 07:26:48.433 [Thd =327] Info Default objCount:3 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:P200;objId:0 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:P140;objId:1 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:P100;objId:2 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:;objId:0 2025-08-31 07:26:48.433 [Thd =327] Info Default lens from system settings: 2025-08-31 07:26:48.433 [Thd =327] Info Default systemlensettings lens count:3 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:P200;objId:0 2025-08-31 07:26:48.433 [Thd =327] Info Default ratio:P140;objId:1 2025-08-31 07:26:48.434 [Thd =327] Info Default ratio:P100;objId:2 2025-08-31 07:26:48.436 [Thd =327] Info AbstractMicroscope Switch Lens:Broadcast Event 2025-08-31 07:26:48.488 [Thd =327] Info AbstractMicroscope Broadcast Event Finished 2025-08-31 07:26:48.491 [Thd =327] Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456. 2025-08-31 07:26:48.491 [Thd =327] Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0 2025-08-31 07:26:48.492 [Thd =327] Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative 2025-08-31 07:26:48.492 [Thd =327] Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1 2025-08-31 07:26:48.492 [Thd =327] Info Default BaseScanObjectLine:------------------ 2025-08-31 07:26:48.492 [Thd =327] Info Default BaseScanObjectLine:***************** 2025-08-31 07:26:48.492 [Thd =327] Info Default BaseScanObjectLine:0000000000000000 2025-08-31 07:26:48.492 [Thd =327] Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110503869843,StepStep:0.431711158589293,CosValueY:1,SinValueY:0 2025-08-31 07:26:48.492 [Thd =327] Info Default deltax_stage 121.698159719926, deltay_stage:0. 2025-08-31 07:26:48.492 [Thd =327] Info Default MoveStageForMarkCol101 point (62.0545046962685, -48.9715722176052), GDS ref(5500000, 138400000), gdsObject(127198000, 138400000), stageRef(62.0500065656205, 72.7265875854492). 2025-08-31 07:26:48.492 [Thd =327] Info Default deltax_stage 0, deltay_stage:-123.635174997328. 2025-08-31 07:26:48.492 [Thd =327] Info Default MoveStageForMarkCol102 point (-61.58067030106, -48.9715722176052), GDS ref(127198000, 138400000), gdsObject(127198000, 14765000), stageRef(62.0545046962685, -48.9715722176052). 2025-08-31 07:26:48.492 [Thd =327] Info Default located_pos:(-61.58067030106, -48.9715722176052) 2025-08-31 07:27:03.383 [Thd =327] Info strip vectorBegin:(-58.921188,-49.12089),VectorEnd:(-64.226519,-49.12089),CaptureBegin:(-60.921188,-49.12089)，CaptureEnd：(-62.226519,-49.12089),StepScan:0.435110503869843 2025-08-31 07:27:03.383 [Thd =327] Info Default VectorBegin:(-58.9211878921901,-49.1208904056052) 2025-08-31 07:27:04.632 [Thd =332] Warn Default 检测光源最大功率(mw):300mw 2025-08-31 07:27:04.632 [Thd =327] Info Default SetMaxPower:300 2025-08-31 07:27:05.633 [Thd =332] Info Default 打开光源，亮度：41% 2025-08-31 07:27:05.633 [Thd =320] Info Default OpenLamp Transmission 2025-08-31 07:27:05.655 [Thd =322] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:27:06.486 [Thd =300] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:27:07.156 [Thd =322] Error Default SyncSend recv cmd timeout 2025-08-31 07:27:07.634 [Thd =327] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:27:07.634 [Thd =300] Info Default 聚焦Track已关闭 2025-08-31 07:27:09.263 [Thd =320] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:27:09.263 [Thd =320] Info Default OpenLamp Reflection 2025-08-31 07:27:09.489 [Thd =327] Info MMSFocus _isStop = true 2025-08-31 07:27:10.994 [Thd =327] Info Default QuerySubstrateMode Line OK 2025-08-31 07:27:10.994 [Thd =332] Info Default 已切换到线阵聚焦模式 2025-08-31 07:27:11.083 [Thd =320] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:27:13.996 [Thd =327] Info Default SetFocusTrack OpenTrack OK 2025-08-31 07:27:13.996 [Thd =215] Info Default 聚焦Track已开启 2025-08-31 07:27:17.643 [Thd =209] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:27:17.643 [Thd =209] Info Default ChangeLightPath: False! 2025-08-31 07:27:17.643 [Thd =299] Info Default RTB 标定中,请等待 ...... 2025-08-31 07:27:17.643 [Thd =332] Info Default CurrentSize:2048,2048 2025-08-31 07:27:17.643 [Thd =332] Info Default Camera size no change 2025-08-31 07:27:17.643 [Thd =215] Info Default CurrentSize:2048,2048 2025-08-31 07:27:17.644 [Thd =215] Info Default Camera size no change 2025-08-31 07:27:17.645 [Thd =332] Info Default Set camera size success 2025-08-31 07:27:17.645 [Thd =332] Info Default Current:TDIStage：TDI256，Target：TDI256 2025-08-31 07:27:17.645 [Thd =215] Info Default Set camera size success 2025-08-31 07:27:17.645 [Thd =215] Info Default Current:TDIStage：TDI208，Target：TDI208 2025-08-31 07:27:19.096 [Thd =332] Info Default Set camera parameter 2025-08-31 07:27:19.096 [Thd =332] Info Default TriggerMode is On,dont set 2025-08-31 07:27:19.096 [Thd =332] Info Default BUFFER_COUNT no change 2025-08-31 07:27:19.600 [Thd =215] Info Default Set camera parameter 2025-08-31 07:27:19.601 [Thd =215] Info Default TriggerMode is On,dont set 2025-08-31 07:27:19.601 [Thd =215] Info Default BUFFER_COUNT no change 2025-08-31 07:27:19.608 [Thd =327] Info Default SetDistortionPara disaabled 2025-08-31 07:27:19.608 [Thd =327] Info Default scanStrips:1 2025-08-31 07:27:19.663 [Thd =327] Info Default m_focusMapMode：0 2025-08-31 07:27:19.665 [Thd =327] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:60.9211878921901,EndPoint:62.2265194037997 2025-08-31 07:27:20.680 [Thd =327] Info Default Get_Tolerance_and_Rounding:******Tolerance******** 2025-08-31 07:27:23.508 [Thd =327] Info Default Get_Tolerance_and_Rounding:-----------Tolerance------------- 2025-08-31 07:27:23.553 [Thd =327] Warn Default 还原光源最大功率 2025-08-31 07:27:23.553 [Thd =332] Info Default LaserLamp MaxPower:300 2025-08-31 07:27:24.555 [Thd =299] Info Default OpenLamp Transmission 2025-08-31 07:27:25.028 [Thd =322] Info MMSFocus _isStop = true 2025-08-31 07:27:25.373 [Thd =209] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:27:26.377 [Thd =299] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:27:26.377 [Thd =299] Info Default CloseLamp Reflection 2025-08-31 07:27:27.405 [Thd =320] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:27:27.533 [Thd =322] Info Default QuerySubstrateMode Area OK 2025-08-31 07:27:27.533 [Thd =215] Info Default 已切换到面阵聚焦模式 2025-08-31 07:27:28.906 [Thd =320] Error Default SyncSend recv cmd timeout 2025-08-31 07:27:29.534 [Thd =322] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:27:29.534 [Thd =320] Info Default 聚焦Track已关闭 2025-08-31 07:27:36.578 [Thd =262] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:27:39.844 [Thd =262] Info Default 公差标定完成 2025-08-31 07:27:40.003 [Thd =332] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:b__29_1 Before Memory usage:12974.63MB VirtualMemorySize:162.2 GB 2025-08-31 07:28:05.566 [Thd =1] Info Default CDdefectResolution is 0.2 2025-08-31 07:28:05.566 [Thd =1] Info Default CDdefectResolutionBil is 0.25 2025-08-31 07:28:05.566 [Thd =1] Info Default PHdefectResolution is 0.2 2025-08-31 07:28:20.567 [Thd =1] Info Default Licensed has techLevel count:3 2025-08-31 07:28:20.719 [Thd =1] Info Default MultiInspect:ContinueScanStrip:0 2025-08-31 07:28:20.719 [Thd =1] Info Default ######################################Start inspect################################################# 2025-08-31 07:28:20.720 [Thd =327] Info Default Start [1/1] 2025-08-31 07:28:20.720 [Thd =332] Info Default 开始检查！ 2025-08-31 07:28:22.324 [Thd =1] Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:19209025,145642782 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 2025-08-31 07:28:22.324 [Thd =163] Info Default 初始化插件 2025-08-31 07:28:22.324 [Thd =300] Info Default CurrentSize:2048,2048 2025-08-31 07:28:22.324 [Thd =300] Info Default Camera size no change 2025-08-31 07:28:22.325 [Thd =262] Info Default 设置 TDI 相机参数... 2025-08-31 07:28:22.325 [Thd =1] Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True 2025-08-31 07:28:22.325 [Thd =261] Info Default CurrentSize:2048,2048 2025-08-31 07:28:22.325 [Thd =261] Info Default Camera size no change 2025-08-31 07:28:22.326 [Thd =1] Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True 2025-08-31 07:28:22.326 [Thd =1] Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise 2025-08-31 07:28:22.326 [Thd =300] Info Default Set camera size success 2025-08-31 07:28:22.326 [Thd =300] Info Default Current:TDIStage：TDI256，Target：TDI256 2025-08-31 07:28:22.327 [Thd =261] Info Default Set camera size success 2025-08-31 07:28:22.327 [Thd =261] Info Default Current:TDIStage：TDI208，Target：TDI208 2025-08-31 07:28:22.327 [Thd =337] Info Default 初始化DB目录 2025-08-31 07:28:22.448 [Thd =1] Info Default deltax_stage 13.7090429921154, deltay_stage:0. 2025-08-31 07:28:22.448 [Thd =1] Info Default MoveStageForMarkCol101 point (62.050513270624, 59.0175445839696), GDS ref(5500000, 138400000), gdsObject(19209025, 138400000), stageRef(62.0500065656205, 72.7265875854492). 2025-08-31 07:28:22.448 [Thd =1] Info Default deltax_stage 0, deltay_stage:7.24279125168703. 2025-08-31 07:28:22.448 [Thd =1] Info Default MoveStageForMarkCol102 point (69.293304522311, 59.0175445839696), GDS ref(19209025, 138400000), gdsObject(19209025, 145642781), stageRef(62.050513270624, 59.0175445839696). 2025-08-31 07:28:22.448 [Thd =1] Info Default located_pos:(69.293304522311, 59.0175445839696) 2025-08-31 07:28:22.448 [Thd =1] Info Default deltax_stage 0, deltay_stage:-124.400176080136. 2025-08-31 07:28:22.448 [Thd =1] Info Default MoveStageForMarkCol102 point (-62.3501695145159, 72.7265875854492), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0500065656205, 72.7265875854492). 2025-08-31 07:28:22.448 [Thd =1] Info Default located_pos:(-62.3501695145159, 72.7265875854492) 2025-08-31 07:28:22.449 [Thd =320] Info Default Measuring the height difference of inspection area 2025-08-31 07:28:23.777 [Thd =300] Info Default Set camera parameter 2025-08-31 07:28:23.777 [Thd =300] Info Default TriggerMode is On,dont set 2025-08-31 07:28:23.778 [Thd =300] Info Default BUFFER_COUNT no change 2025-08-31 07:28:24.282 [Thd =261] Info Default Set camera parameter 2025-08-31 07:28:24.282 [Thd =261] Info Default TriggerMode is On,dont set 2025-08-31 07:28:24.282 [Thd =261] Info Default BUFFER_COUNT no change 2025-08-31 07:28:45.650 [Thd =322] Info Default 初始化DPU服务器！ 2025-08-31 07:28:45.650 [Thd =261] Info Default MCUHelper.ResetMcu(),Restart service！ 2025-08-31 07:28:48.565 [Thd =302] Info MMSFocus _isStop = true 2025-08-31 07:28:49.949 [Thd =262] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032121,"ServiceStartTime":"2025\/8\/31 5:55:54","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:49.950 [Thd =299] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032121,"ServiceStartTime":"2025\/8\/31 5:55:57","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:49.950 [Thd =262] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032121,"ServiceStartTime":"2025\/8\/31 5:55:55","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":1},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:49.950 [Thd =332] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032121,"ServiceStartTime":"2025\/8\/31 5:57:57","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:52.474 [Thd =337] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032126,"ServiceStartTime":"2025\/8\/31 7:28:49","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:52.491 [Thd =320] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032126,"ServiceStartTime":"2025\/8\/31 7:30:49","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:52.729 [Thd =300] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032126,"ServiceStartTime":"2025\/8\/31 7:28:49","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:52.730 [Thd =332] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2032126,"ServiceStartTime":"2025\/8\/31 7:28:50","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:28:53.193 [Thd =261] Info Default MCUHelper.ResetMcu(),All Dpus are restarted！ 2025-08-31 07:28:53.231 [Thd =1] Info Default Register inspect event！ 2025-08-31 07:28:53.240 [Thd =1] Info Default initial*****Light_intensity:41, min:10, max:220 2025-08-31 07:28:53.240 [Thd =209] Info Default 初始化检测数据 2025-08-31 07:28:53.241 [Thd =1] Info Default ***gds clip thread num is 6 2025-08-31 07:28:53.241 [Thd =1] Info ********************corePlug version is {0} **************** 3.0SPC200 2025-08-31 07:28:53.241 [Thd =1] Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3501695145159, reference point Stage_Y: 72.7265875854492, starting point GDS_X: 19209025, starting point GDS_Y: 145642782 2025-08-31 07:28:53.241 [Thd =299] Info Default m_start_strip_no:0 2025-08-31 07:28:53.241 [Thd =299] Info Default BINING TEST 0802 jMInspectPara.m_bin:1 2025-08-31 07:28:53.241 [Thd =299] Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\28524B13B4930A4B9B85D07132C6DBDE.oas","m_layerMode":0,"m_layerNo":5,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1058,"m_col":1316,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":19209025,"m_beginY":145642782,"m_endX":132491524,"m_endY":7040882,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":15,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1275,"m_tolerance_mode":0,"m_x_tolerance":-0.086,"m_y_tolerance":-0.098,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":1,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\961535-5-YXC\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":265,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-31\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-31\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.25,"m_optical_head_id":0,"m_outer_round":0.25,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,221,4,0,1130102784,1065353216,1065353216,0,0,516],"m_R_collect":[200,198,107,0,1128792064,1065353216,1065353216,0,0,516],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.124,"m_y_tolerance_R":-0.18,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false,"m_dilation_value":2.70000029} 2025-08-31 07:28:53.243 [Thd =299] Info Default m_line_camera_cols:319 2025-08-31 07:28:53.243 [Thd =299] Info Default AllocHGlobal img mem pic_count:319, img_w:2032, img_h:2048 2025-08-31 07:28:53.243 [Thd =299] Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern 2025-08-31 07:28:53.247 [Thd =299] Info Default SetDistortionPara disaabled 2025-08-31 07:28:53.247 [Thd =299] Info Default Set distortion correction parameters End 2025-08-31 07:28:53.247 [Thd =299] Info Default InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1058,pic_count(Grid2.Cols):1275,pic_count_pack(Grid.Cols):1316,max_batch:20,mode:0,m_channel:4 2025-08-31 07:28:53.686 [Thd =299] Info Default InitDie2DBRes Success!!!! 2025-08-31 07:28:59.451 [Thd =302] Info Default DemarcateInspectZ:3.3 2025-08-31 07:29:00.231 [Thd =302] Info MMSFocus _isStop = true 2025-08-31 07:29:11.351 [Thd =302] Info Default DemarcateInspectZ:3.2 2025-08-31 07:29:12.127 [Thd =302] Info MMSFocus _isStop = true 2025-08-31 07:29:22.225 [Thd =302] Info Default DemarcateInspectZ:0.7 2025-08-31 07:29:23.004 [Thd =302] Info MMSFocus _isStop = true 2025-08-31 07:29:34.133 [Thd =302] Info Default DemarcateInspectZ:1.5 2025-08-31 07:29:34.140 [Thd =302] Info Default MarkHeightDifference:2.6 2025-08-31 07:29:34.141 [Thd =332] Info Default Difference of the Inspection Area2.60μm 2025-08-31 07:29:55.945 [Thd =1] Info MMSFocus _isStop = true 2025-08-31 07:29:56.946 [Thd =1] Info Default Successful alignment！ 2025-08-31 07:29:56.946 [Thd =262] Info Default 对准完成！ 2025-08-31 07:29:56.946 [Thd =337] Info Default 稍等！设置相机参数中 2025-08-31 07:29:56.946 [Thd =300] Info Default 注册相机取图 2025-08-31 07:29:56.947 [Thd =209] Info Default 移动到起始点位 2025-08-31 07:29:57.068 [Thd =302] Info MMSFocus _isStop = true 2025-08-31 07:29:57.274 [Thd =302] Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110503869843,StepStep:0.431711158589293,CosValueY:1,SinValueY:0 2025-08-31 07:29:57.275 [Thd =332] Warn Default 检测光源最大功率(mw):300mw 2025-08-31 07:29:57.275 [Thd =302] Info Default SetMaxPower:300 2025-08-31 07:29:58.275 [Thd =332] Info Default 打开光源，亮度：41% 2025-08-31 07:29:58.275 [Thd =320] Info Default OpenLamp Transmission 2025-08-31 07:29:58.307 [Thd =322] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:29:59.079 [Thd =262] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:29:59.808 [Thd =322] Error Default SyncSend recv cmd timeout 2025-08-31 07:30:00.276 [Thd =302] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:30:00.276 [Thd =337] Info Default 聚焦Track已关闭 2025-08-31 07:30:01.596 [Thd =302] Info MMSFocus _isStop = true 2025-08-31 07:30:01.894 [Thd =320] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:30:01.894 [Thd =320] Info Default OpenLamp Reflection 2025-08-31 07:30:03.114 [Thd =302] Info Default QuerySubstrateMode Line OK 2025-08-31 07:30:03.114 [Thd =262] Info Default 已切换到线阵聚焦模式 2025-08-31 07:30:03.700 [Thd =320] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:30:05.116 [Thd =302] Info Default SetFocusTrack OpenTrack OK 2025-08-31 07:30:05.116 [Thd =332] Info Default 聚焦Track已开启 2025-08-31 07:30:10.302 [Thd =300] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:30:10.302 [Thd =300] Info Default ChangeLightPath: False! 2025-08-31 07:30:10.302 [Thd =300] Info Default 执行MarkOffSet...... 2025-08-31 07:30:10.302 [Thd =299] Info Default CurrentSize:2048,2048 2025-08-31 07:30:10.302 [Thd =299] Info Default Camera size no change 2025-08-31 07:30:10.302 [Thd =299] Info Default Set camera size success 2025-08-31 07:30:10.302 [Thd =299] Info Default Current:TDIStage：TDI208，Target：TDI208 2025-08-31 07:30:11.282 [Thd =299] Info Default Set camera parameter 2025-08-31 07:30:11.282 [Thd =299] Info Default TriggerMode is On,dont set 2025-08-31 07:30:11.282 [Thd =299] Info Default BUFFER_COUNT no change 2025-08-31 07:30:11.285 [Thd =302] Info strip vectorBegin:(59.458334,72.577269),VectorEnd:(64.763665,72.577269),CaptureBegin:(61.458334,72.577269)，CaptureEnd：(62.763665,72.577269),StepScan:0.435110503869843 2025-08-31 07:30:13.725 [Thd =302] Info Default m_focusMapMode：0 2025-08-31 07:30:13.727 [Thd =302] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:-61.4583337428809,EndPoint:-62.7636652544904 2025-08-31 07:30:13.919 [Thd =34] Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 2025-08-31 07:30:13.935 [Thd =34] Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 2025-08-31 07:30:14.265 [Thd =34] Info Default stormCore.MatchTemplate:0.8517388 2025-08-31 07:30:14.265 [Thd =337] Warn Default Mark offset match score:0.85174 2025-08-31 07:30:15.272 [Thd =302] Info MMSFocus _isStop = true 2025-08-31 07:30:15.804 [Thd =332] Warn Default 还原光源最大功率 2025-08-31 07:30:15.804 [Thd =302] Info Default LaserLamp MaxPower:300 2025-08-31 07:30:16.806 [Thd =209] Info Default OpenLamp Transmission 2025-08-31 07:30:16.806 [Thd =300] Info MMSFocus _isStop = true 2025-08-31 07:30:17.610 [Thd =322] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:30:18.613 [Thd =209] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:30:18.613 [Thd =209] Info Default CloseLamp Reflection 2025-08-31 07:30:19.323 [Thd =300] Info Default QuerySubstrateMode Area OK 2025-08-31 07:30:19.323 [Thd =337] Info Default 已切换到面阵聚焦模式 2025-08-31 07:30:19.650 [Thd =332] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:30:21.158 [Thd =332] Error Default SyncSend recv cmd timeout 2025-08-31 07:30:21.325 [Thd =300] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:30:21.325 [Thd =209] Info Default 聚焦Track已关闭 2025-08-31 07:30:28.844 [Thd =299] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:30:29.592 [Thd =1] Info Default Move to the inspect start point，Starting point coordinates：X:69.293304522311,Y:59.0175445839696,OffSet.X:5,OffSet.Y:3 2025-08-31 07:30:29.592 [Thd =322] Warn Default 标记偏移点X:5，Y:3 2025-08-31 07:30:31.713 [Thd =299] Info Default Zposition:0 2025-08-31 07:30:32.515 [Thd =262] Info Default Wait! Setting camera parameters 2025-08-31 07:30:32.515 [Thd =1] Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running 2025-08-31 07:30:32.518 [Thd =1] Info Default SetSystemStatus:WR DM0 2 2025-08-31 07:30:32.518 [Thd =1] Info Default SetSystemStatus Success 2025-08-31 07:30:32.519 [Thd =1] Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running 2025-08-31 07:30:32.519 [Thd =1] Info Default AUtoWorkerHelper.StartWorker() Running ! 2025-08-31 07:30:32.519 [Thd =1] Info Default AutoWorderHelper:StartWorker. 2025-08-31 07:30:32.519 [Thd =1] Info Default AutoWorderHelper:SaveTask2DB. 2025-08-31 07:30:32.693 [Thd =1] Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 4138 2025-08-31 07:30:32.693 [Thd =1] Info Default AutoWorderHelper:InitInspectingData. 2025-08-31 07:30:32.693 [Thd =1] Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0 2025-08-31 07:30:32.694 [Thd =300] Info Default 检测线程启动！ 2025-08-31 07:30:32.694 [Thd =202] Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running 2025-08-31 07:30:32.694 [Thd =209] Info Default 结果处理线程启动！ 2025-08-31 07:30:32.696 [Thd =202] Info Default SetSystemStatus:WR DM0 2 2025-08-31 07:30:32.697 [Thd =202] Info Default SetSystemStatus Success 2025-08-31 07:30:32.697 [Thd =202] Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running 2025-08-31 07:30:32.703 [Thd =1] Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:4138 2025-08-31 07:30:32.704 [Thd =1] Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:4138 2025-08-31 07:30:32.981 [Thd =202] Info MMSFocus _isStop = true 2025-08-31 07:30:32.982 [Thd =202] Info Default aSwitchIndex index:0 2025-08-31 07:30:32.982 [Thd =202] Info Default lens from ATF: 2025-08-31 07:30:32.982 [Thd =202] Info Default objCount:3 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:P200;objId:0 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:P140;objId:1 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:P100;objId:2 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:;objId:0 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:;objId:0 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:;objId:0 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:;objId:0 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:;objId:0 2025-08-31 07:30:32.982 [Thd =202] Info Default lens from system settings: 2025-08-31 07:30:32.982 [Thd =202] Info Default systemlensettings lens count:3 2025-08-31 07:30:32.982 [Thd =202] Info Default ratio:P200;objId:0 2025-08-31 07:30:32.983 [Thd =202] Info Default ratio:P140;objId:1 2025-08-31 07:30:32.983 [Thd =202] Info Default ratio:P100;objId:2 2025-08-31 07:30:32.985 [Thd =202] Info AbstractMicroscope Switch Lens:Broadcast Event 2025-08-31 07:30:33.020 [Thd =202] Info AbstractMicroscope Broadcast Event Finished 2025-08-31 07:30:33.020 [Thd =202] Info Default defectData.RecivePicCount:0 2025-08-31 07:30:33.020 [Thd =202] Info Default start inspect task pic_count of one strip:319, big_strip_count:265. 2025-08-31 07:30:33.020 [Thd =202] Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456. 2025-08-31 07:30:33.021 [Thd =202] Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0 2025-08-31 07:30:33.021 [Thd =202] Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative 2025-08-31 07:30:33.021 [Thd =202] Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1 2025-08-31 07:30:33.021 [Thd =202] Info Default BaseScanObjectLine:------------------ 2025-08-31 07:30:33.021 [Thd =202] Info Default BaseScanObjectLine:***************** 2025-08-31 07:30:33.021 [Thd =202] Info Default BaseScanObjectLine:0000000000000000 2025-08-31 07:30:33.021 [Thd =202] Info Default scaleX: 0.999998687573204, scaleY:0.999998584566823 2025-08-31 07:30:33.021 [Thd =202] Info Default Orth_Y_BeforR: 0.127063828558936,StageScaleX:0.999998687573204,Y:0.999998584566823 2025-08-31 07:30:33.021 [Thd =202] Info Default LengthOfAccelerationAndDeceleration: 2 2025-08-31 07:30:35.034 [Thd =202] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:30:35.034 [Thd =302] Info Default 聚焦Track已关闭 2025-08-31 07:30:35.034 [Thd =262] Info Default 正在切换线阵相机光路 2025-08-31 07:30:47.053 [Thd =202] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:30:47.053 [Thd =202] Info Default ChangeLightPath: False! 2025-08-31 07:30:47.053 [Thd =202] Info Default SnakeScanLine: Paddle Rotate angle is 0 ! 2025-08-31 07:30:49.172 [Thd =202] Info Default InspectOverlayX: 16, InspectOverlayY:16 2025-08-31 07:30:49.185 [Thd =337] Warn Default 检测光源最大功率(mw):300mw 2025-08-31 07:30:49.185 [Thd =202] Info Default SetMaxPower:300 2025-08-31 07:30:50.187 [Thd =202] Info Default OpenLamp Transmission 2025-08-31 07:30:50.187 [Thd =262] Info Default 正在打开透射、反射光源，亮度 41% 2025-08-31 07:30:50.989 [Thd =302] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:30:53.811 [Thd =202] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:30:53.811 [Thd =202] Info Default OpenLamp Reflection 2025-08-31 07:30:54.834 [Thd =300] Info Default LaserLamp MaxPower:300,currentPower:123 2025-08-31 07:30:55.618 [Thd =202] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:30:55.618 [Thd =337] Info Default 正在启用实时聚焦 2025-08-31 07:30:56.012 [Thd =202] Info MMSFocus _isStop = true 2025-08-31 07:30:56.335 [Thd =300] Error Default SyncSend recv cmd timeout 2025-08-31 07:30:58.524 [Thd =202] Info Default QuerySubstrateMode Line OK 2025-08-31 07:30:58.524 [Thd =322] Info Default 已切换到线阵聚焦模式 2025-08-31 07:30:59.528 [Thd =332] Info Default 正在设置扫描控制参数 2025-08-31 07:30:59.528 [Thd =202] Info Default GetParameter: stepCompX is 0.000212456300717697 2025-08-31 07:31:00.334 [Thd =202] Info Default Allocate resources! 2025-08-31 07:31:00.334 [Thd =202] Info Default GPU num is 2! 2025-08-31 07:31:02.336 [Thd =202] Info Default SetFocusTrack OpenTrack OK 2025-08-31 07:31:02.336 [Thd =302] Info Default 聚焦Track已开启 2025-08-31 07:31:02.336 [Thd =202] Info Default Start scanning; Start strip number: 0, total strip number: 265 2025-08-31 07:31:02.336 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 0 2025-08-31 07:31:02.336 [Thd =320] Info Default 开始扫描条带； [0/265] 2025-08-31 07:31:02.353 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:31:02.355 [Thd =202] Info Default CaptureBeginX: 69.72863, CaptureBeginY:58.64536, CaptureEndX:-69.55024, CaptureEndY:58.64536, VectorBeginX:71.29352, VectorBeginY:58.64536, VectorEndX:-71.50673, VectorEndY:58.64536, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:31:02.356 [Thd =202] Info Default ***row:0, vectorBeginX:71.294, vectorBeginY:58.645, captureBeginX:69.729, captureBeginY:58.645, captureEndX:-69.550, captureEndY:58.645, vectorEndX:-71.507, vectorEndY:58.645 2025-08-31 07:31:02.356 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:02.357 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7286335751589,EndPoint:69.5502387135777 2025-08-31 07:31:07.175 [Thd =33] Info Default Stripes are collected for data processing！strip_no:0 2025-08-31 07:31:07.176 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:07.176 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:07.176 [Thd =34] Info Default Stripes are collected for data processing！strip_no:0 2025-08-31 07:31:07.176 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:07.176 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:B_SourceLightType 2025-08-31 07:31:07.177 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:A_SourceLightType 2025-08-31 07:31:07.177 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,B_SourceLightType 2025-08-31 07:31:07.177 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,A_SourceLightType 2025-08-31 07:31:07.355 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;0/265, 2025-08-31 07:31:07.364 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:07.454 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:07.644 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:07.660 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_0_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:07.790 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 1 2025-08-31 07:31:07.790 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 1 2025-08-31 07:31:07.790 [Thd =261] Info Default 开始扫描条带； [1/265] 2025-08-31 07:31:07.800 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:31:07.802 [Thd =202] Info Default ***row:1, vectorBeginX:-71.507, vectorBeginY:58.217, captureBeginX:-69.888, captureBeginY:58.217, captureEndX:69.391, captureEndY:58.217, vectorEndX:71.294, vectorEndY:58.217 2025-08-31 07:31:07.803 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:07.804 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8876498488698,EndPoint:-69.3912224398668 2025-08-31 07:31:08.149 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:08.152 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_0_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:12.625 [Thd =33] Info Default Stripes are collected for data processing！strip_no:1 2025-08-31 07:31:12.625 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:12.625 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:12.625 [Thd =34] Info Default Stripes are collected for data processing！strip_no:1 2025-08-31 07:31:12.626 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:12.626 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:B_SourceLightType 2025-08-31 07:31:12.626 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:A_SourceLightType 2025-08-31 07:31:12.626 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,B_SourceLightType 2025-08-31 07:31:12.626 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,A_SourceLightType 2025-08-31 07:31:12.803 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;1/265, 2025-08-31 07:31:12.811 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:12.875 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:13.107 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:13.123 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_1_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:13.212 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 2 2025-08-31 07:31:13.212 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 2 2025-08-31 07:31:13.228 [Thd =300] Info Default 开始扫描条带； [2/265] 2025-08-31 07:31:13.238 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:31:13.241 [Thd =202] Info Default CaptureBeginX: 69.72867, CaptureBeginY:57.78874, CaptureEndX:-69.55021, CaptureEndY:57.78874, VectorBeginX:71.29356, VectorBeginY:57.78874, VectorEndX:-71.50669, VectorEndY:57.78874, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:31:13.241 [Thd =202] Info Default ***row:2, vectorBeginX:71.294, vectorBeginY:57.789, captureBeginX:69.729, captureBeginY:57.789, captureEndX:-69.550, captureEndY:57.789, vectorEndX:-71.507, vectorEndY:57.789 2025-08-31 07:31:13.241 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:13.243 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7286669613894,EndPoint:69.5502053273473 2025-08-31 07:31:13.641 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:13.644 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_1_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:18.065 [Thd =33] Info Default Stripes are collected for data processing！strip_no:2 2025-08-31 07:31:18.066 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:18.066 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:18.067 [Thd =34] Info Default Stripes are collected for data processing！strip_no:2 2025-08-31 07:31:18.067 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:18.068 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:B_SourceLightType 2025-08-31 07:31:18.068 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:A_SourceLightType 2025-08-31 07:31:18.068 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,B_SourceLightType 2025-08-31 07:31:18.068 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,A_SourceLightType 2025-08-31 07:31:18.246 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;2/265, 2025-08-31 07:31:18.255 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:18.309 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:18.550 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:18.566 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_2_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:18.652 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 3 2025-08-31 07:31:18.652 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 3 2025-08-31 07:31:18.652 [Thd =261] Info Default 开始扫描条带； [3/265] 2025-08-31 07:31:18.661 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:31:18.664 [Thd =202] Info Default ***row:3, vectorBeginX:-71.507, vectorBeginY:57.360, captureBeginX:-69.888, captureBeginY:57.360, captureEndX:69.391, captureEndY:57.360, vectorEndX:71.294, vectorEndY:57.360 2025-08-31 07:31:18.664 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:18.666 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8876045607839,EndPoint:-69.3912677279527 2025-08-31 07:31:19.062 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:19.064 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_2_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:23.486 [Thd =33] Info Default Stripes are collected for data processing！strip_no:3 2025-08-31 07:31:23.486 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:23.486 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:23.489 [Thd =34] Info Default Stripes are collected for data processing！strip_no:3 2025-08-31 07:31:23.489 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:23.489 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:B_SourceLightType 2025-08-31 07:31:23.489 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:A_SourceLightType 2025-08-31 07:31:23.489 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,B_SourceLightType 2025-08-31 07:31:23.489 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,A_SourceLightType 2025-08-31 07:31:23.656 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;3/265, 2025-08-31 07:31:23.674 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:23.719 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:23.975 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:24.003 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_3_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:24.058 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 4 2025-08-31 07:31:24.058 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 4 2025-08-31 07:31:24.058 [Thd =193] Info Default 开始扫描条带； [4/265] 2025-08-31 07:31:24.067 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:31:24.070 [Thd =202] Info Default CaptureBeginX: 69.72870, CaptureBeginY:56.93211, CaptureEndX:-69.55017, CaptureEndY:56.93211, VectorBeginX:71.29359, VectorBeginY:56.93211, VectorEndX:-71.50666, VectorEndY:56.93211, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:31:24.070 [Thd =202] Info Default ***row:4, vectorBeginX:71.294, vectorBeginY:56.932, captureBeginX:69.729, captureBeginY:56.932, captureEndX:-69.550, captureEndY:56.932, vectorEndX:-71.507, vectorEndY:56.932 2025-08-31 07:31:24.070 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:24.072 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7286978451784,EndPoint:69.5501744435582 2025-08-31 07:31:24.511 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:24.514 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_3_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:27.912 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:31:27 2025-08-31 07:31:27.932 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:31:27 2025-08-31 07:31:28.892 [Thd =34] Info Default Stripes are collected for data processing！strip_no:4 2025-08-31 07:31:28.892 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:28.892 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:28.892 [Thd =33] Info Default Stripes are collected for data processing！strip_no:4 2025-08-31 07:31:28.893 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:28.893 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:A_SourceLightType 2025-08-31 07:31:28.893 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:B_SourceLightType 2025-08-31 07:31:28.893 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,A_SourceLightType 2025-08-31 07:31:28.893 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,B_SourceLightType 2025-08-31 07:31:29.063 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;4/265, 2025-08-31 07:31:29.072 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:29.156 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:29.377 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:29.380 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_4_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:29.492 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 5 2025-08-31 07:31:29.492 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 5 2025-08-31 07:31:29.492 [Thd =340] Info Default 开始扫描条带； [5/265] 2025-08-31 07:31:29.501 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:31:29.504 [Thd =202] Info Default ***row:5, vectorBeginX:-71.507, vectorBeginY:56.504, captureBeginX:-69.888, captureBeginY:56.504, captureEndX:69.391, captureEndY:56.504, vectorEndX:71.294, vectorEndY:56.504 2025-08-31 07:31:29.504 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:29.506 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8875864943776,EndPoint:-69.391285794359 2025-08-31 07:31:29.887 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:29.889 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_4_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:32.953 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:31:32 2025-08-31 07:31:32.973 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:31:32 2025-08-31 07:31:34.326 [Thd =33] Info Default Stripes are collected for data processing！strip_no:5 2025-08-31 07:31:34.326 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:34.326 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:34.327 [Thd =34] Info Default Stripes are collected for data processing！strip_no:5 2025-08-31 07:31:34.328 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:34.328 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:B_SourceLightType 2025-08-31 07:31:34.328 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:A_SourceLightType 2025-08-31 07:31:34.328 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,B_SourceLightType 2025-08-31 07:31:34.328 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,A_SourceLightType 2025-08-31 07:31:34.502 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;5/265, 2025-08-31 07:31:34.510 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:34.575 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:34.815 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:34.818 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_5_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:34.916 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 6 2025-08-31 07:31:34.916 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 6 2025-08-31 07:31:34.916 [Thd =299] Info Default 开始扫描条带； [6/265] 2025-08-31 07:31:34.925 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:31:34.928 [Thd =202] Info Default CaptureBeginX: 69.72874, CaptureBeginY:56.07549, CaptureEndX:-69.55014, CaptureEndY:56.07549, VectorBeginX:71.29363, VectorBeginY:56.07549, VectorEndX:-71.50662, VectorEndY:56.07549, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:31:34.928 [Thd =202] Info Default ***row:6, vectorBeginX:71.294, vectorBeginY:56.075, captureBeginX:69.729, captureBeginY:56.075, captureEndX:-69.550, captureEndY:56.075, vectorEndX:-71.507, vectorEndY:56.075 2025-08-31 07:31:34.928 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:34.930 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7287369076784,EndPoint:69.5501353810582 2025-08-31 07:31:35.335 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:35.337 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_5_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:38.503 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:31:38 2025-08-31 07:31:38.520 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:31:38 2025-08-31 07:31:39.750 [Thd =33] Info Default Stripes are collected for data processing！strip_no:6 2025-08-31 07:31:39.750 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:39.750 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:39.750 [Thd =34] Info Default Stripes are collected for data processing！strip_no:6 2025-08-31 07:31:39.750 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:39.751 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:B_SourceLightType 2025-08-31 07:31:39.751 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:A_SourceLightType 2025-08-31 07:31:39.751 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,B_SourceLightType 2025-08-31 07:31:39.751 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,A_SourceLightType 2025-08-31 07:31:39.924 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;6/265, 2025-08-31 07:31:39.933 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:39.972 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:40.232 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:40.247 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_6_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:40.309 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 7 2025-08-31 07:31:40.309 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 7 2025-08-31 07:31:40.309 [Thd =300] Info Default 开始扫描条带； [7/265] 2025-08-31 07:31:40.327 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:31:40.330 [Thd =202] Info Default ***row:7, vectorBeginX:-71.507, vectorBeginY:55.647, captureBeginX:-69.888, captureBeginY:55.647, captureEndX:69.391, captureEndY:55.647, vectorEndX:71.294, vectorEndY:55.647 2025-08-31 07:31:40.330 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:40.333 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8875450515065,EndPoint:-69.3913272372301 2025-08-31 07:31:40.748 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:40.750 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_6_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:42.038 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:31:42 2025-08-31 07:31:42.049 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:31:42 2025-08-31 07:31:45.157 [Thd =34] Info Default Stripes are collected for data processing！strip_no:7 2025-08-31 07:31:45.157 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:45.157 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:45.157 [Thd =33] Info Default Stripes are collected for data processing！strip_no:7 2025-08-31 07:31:45.158 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:45.158 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:A_SourceLightType 2025-08-31 07:31:45.158 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:B_SourceLightType 2025-08-31 07:31:45.158 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,A_SourceLightType 2025-08-31 07:31:45.158 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,B_SourceLightType 2025-08-31 07:31:45.329 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;7/265, 2025-08-31 07:31:45.347 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:45.440 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:45.654 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:45.656 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_7_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:45.777 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 8 2025-08-31 07:31:45.777 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 8 2025-08-31 07:31:45.777 [Thd =311] Info Default 开始扫描条带； [8/265] 2025-08-31 07:31:45.786 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:31:45.789 [Thd =202] Info Default CaptureBeginX: 69.72875, CaptureBeginY:55.21888, CaptureEndX:-69.55012, CaptureEndY:55.21888, VectorBeginX:71.29364, VectorBeginY:55.21888, VectorEndX:-71.50661, VectorEndY:55.21888, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:31:45.789 [Thd =202] Info Default ***row:8, vectorBeginX:71.294, vectorBeginY:55.219, captureBeginX:69.729, captureBeginY:55.219, captureEndX:-69.550, captureEndY:55.219, vectorEndX:-71.507, vectorEndY:55.219 2025-08-31 07:31:45.789 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:45.791 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7287481991823,EndPoint:69.5501240895543 2025-08-31 07:31:46.082 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:31:46 2025-08-31 07:31:46.104 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:31:46 2025-08-31 07:31:46.175 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:46.178 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_7_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:50.609 [Thd =34] Info Default Stripes are collected for data processing！strip_no:8 2025-08-31 07:31:50.610 [Thd =33] Info Default Stripes are collected for data processing！strip_no:8 2025-08-31 07:31:50.610 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:50.610 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:50.610 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:50.610 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:B_SourceLightType 2025-08-31 07:31:50.610 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:A_SourceLightType 2025-08-31 07:31:50.610 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,B_SourceLightType 2025-08-31 07:31:50.610 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,A_SourceLightType 2025-08-31 07:31:50.783 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;8/265, 2025-08-31 07:31:50.792 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:50.827 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:51.112 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:51.115 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_8_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:51.164 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 9 2025-08-31 07:31:51.164 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 9 2025-08-31 07:31:51.164 [Thd =340] Info Default 开始扫描条带； [9/265] 2025-08-31 07:31:51.173 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:31:51.176 [Thd =202] Info Default ***row:9, vectorBeginX:-71.507, vectorBeginY:54.791, captureBeginX:-69.888, captureBeginY:54.791, captureEndX:69.391, captureEndY:54.791, vectorEndX:71.294, vectorEndY:54.791 2025-08-31 07:31:51.176 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:51.177 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8875433425222,EndPoint:-69.3913289462145 2025-08-31 07:31:51.624 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:31:51 2025-08-31 07:31:51.633 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:51.635 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_8_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:51.650 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:31:51 2025-08-31 07:31:56.000 [Thd =33] Info Default Stripes are collected for data processing！strip_no:9 2025-08-31 07:31:56.001 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:56.001 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:31:56.002 [Thd =34] Info Default Stripes are collected for data processing！strip_no:9 2025-08-31 07:31:56.002 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:31:56.002 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:B_SourceLightType 2025-08-31 07:31:56.002 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:A_SourceLightType 2025-08-31 07:31:56.002 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,B_SourceLightType 2025-08-31 07:31:56.003 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,A_SourceLightType 2025-08-31 07:31:56.172 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;9/265, 2025-08-31 07:31:56.181 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:31:56.308 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:31:56.499 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:31:56.501 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_9_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:56.657 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 10 2025-08-31 07:31:56.657 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 10 2025-08-31 07:31:56.657 [Thd =337] Info Default 开始扫描条带； [10/265] 2025-08-31 07:31:56.666 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:31:56.669 [Thd =202] Info Default CaptureBeginX: 69.72874, CaptureBeginY:54.36226, CaptureEndX:-69.55013, CaptureEndY:54.36226, VectorBeginX:71.29363, VectorBeginY:54.36226, VectorEndX:-71.50662, VectorEndY:54.36226, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:31:56.669 [Thd =202] Info Default ***row:10, vectorBeginX:71.294, vectorBeginY:54.362, captureBeginX:69.729, captureBeginY:54.362, captureEndX:-69.550, captureEndY:54.362, vectorEndX:-71.507, vectorEndY:54.362 2025-08-31 07:31:56.669 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:31:56.671 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.728744537073,EndPoint:69.5501277516637 2025-08-31 07:31:56.999 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:31:57.001 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_9_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:31:57.695 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:31:57 2025-08-31 07:31:57.717 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:31:57 2025-08-31 07:32:01.230 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:01 2025-08-31 07:32:01.251 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:01 2025-08-31 07:32:01.489 [Thd =34] Info Default Stripes are collected for data processing！strip_no:10 2025-08-31 07:32:01.489 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:01.489 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:01.490 [Thd =33] Info Default Stripes are collected for data processing！strip_no:10 2025-08-31 07:32:01.490 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:01.490 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:A_SourceLightType 2025-08-31 07:32:01.490 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:B_SourceLightType 2025-08-31 07:32:01.490 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,A_SourceLightType 2025-08-31 07:32:01.490 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,B_SourceLightType 2025-08-31 07:32:01.672 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;10/265, 2025-08-31 07:32:01.682 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:01.767 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:01.983 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:01.985 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_10_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:02.114 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 11 2025-08-31 07:32:02.114 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 11 2025-08-31 07:32:02.114 [Thd =273] Info Default 开始扫描条带； [11/265] 2025-08-31 07:32:02.123 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:32:02.126 [Thd =202] Info Default ***row:11, vectorBeginX:-71.507, vectorBeginY:53.934, captureBeginX:-69.888, captureBeginY:53.934, captureEndX:69.391, captureEndY:53.934, vectorEndX:71.294, vectorEndY:53.934 2025-08-31 07:32:02.126 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:02.127 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.887540534905,EndPoint:-69.3913317538316 2025-08-31 07:32:02.484 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:02.487 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_10_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:06.947 [Thd =33] Info Default Stripes are collected for data processing！strip_no:11 2025-08-31 07:32:06.947 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:06.947 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:06.949 [Thd =34] Info Default Stripes are collected for data processing！strip_no:11 2025-08-31 07:32:06.949 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:06.949 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:B_SourceLightType 2025-08-31 07:32:06.949 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:A_SourceLightType 2025-08-31 07:32:06.949 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,B_SourceLightType 2025-08-31 07:32:06.949 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,A_SourceLightType 2025-08-31 07:32:07.123 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;11/265, 2025-08-31 07:32:07.133 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:07.218 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:07.429 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:07.431 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_11_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:07.559 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 12 2025-08-31 07:32:07.559 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 12 2025-08-31 07:32:07.559 [Thd =193] Info Default 开始扫描条带； [12/265] 2025-08-31 07:32:07.568 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:32:07.571 [Thd =202] Info Default CaptureBeginX: 69.72880, CaptureBeginY:53.50564, CaptureEndX:-69.55007, CaptureEndY:53.50564, VectorBeginX:71.29369, VectorBeginY:53.50564, VectorEndX:-71.50656, VectorEndY:53.50564, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:32:07.571 [Thd =202] Info Default ***row:12, vectorBeginX:71.294, vectorBeginY:53.506, captureBeginX:69.729, captureBeginY:53.506, captureEndX:-69.550, captureEndY:53.506, vectorEndX:-71.507, vectorEndY:53.506 2025-08-31 07:32:07.571 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:07.573 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.728803130823,EndPoint:69.5500691579137 2025-08-31 07:32:07.785 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:07 2025-08-31 07:32:07.804 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:07 2025-08-31 07:32:07.944 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:07.946 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_11_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:12.391 [Thd =33] Info Default Stripes are collected for data processing！strip_no:12 2025-08-31 07:32:12.391 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:12.391 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:12.394 [Thd =34] Info Default Stripes are collected for data processing！strip_no:12 2025-08-31 07:32:12.395 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:12.395 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:B_SourceLightType 2025-08-31 07:32:12.395 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:A_SourceLightType 2025-08-31 07:32:12.395 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,B_SourceLightType 2025-08-31 07:32:12.395 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,A_SourceLightType 2025-08-31 07:32:12.565 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;12/265, 2025-08-31 07:32:12.574 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:12.634 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:12.881 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:12.884 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_12_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:12.970 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 13 2025-08-31 07:32:12.970 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 13 2025-08-31 07:32:12.970 [Thd =337] Info Default 开始扫描条带； [13/265] 2025-08-31 07:32:12.979 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:32:12.982 [Thd =202] Info Default ***row:13, vectorBeginX:-71.507, vectorBeginY:53.077, captureBeginX:-69.887, captureBeginY:53.077, captureEndX:69.391, captureEndY:53.077, vectorEndX:71.294, vectorEndY:53.077 2025-08-31 07:32:12.982 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:12.983 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874975051198,EndPoint:-69.3913747836168 2025-08-31 07:32:13.326 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:13 2025-08-31 07:32:13.408 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:13.411 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_12_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:13.458 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:13 2025-08-31 07:32:17.803 [Thd =34] Info Default Stripes are collected for data processing！strip_no:13 2025-08-31 07:32:17.803 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:17.803 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:17.803 [Thd =33] Info Default Stripes are collected for data processing！strip_no:13 2025-08-31 07:32:17.803 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:17.803 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:A_SourceLightType 2025-08-31 07:32:17.803 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:B_SourceLightType 2025-08-31 07:32:17.804 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,A_SourceLightType 2025-08-31 07:32:17.804 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,B_SourceLightType 2025-08-31 07:32:17.971 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;13/265, 2025-08-31 07:32:17.980 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:18.054 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:18.300 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:18.302 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_13_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:18.399 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 14 2025-08-31 07:32:18.399 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 14 2025-08-31 07:32:18.399 [Thd =261] Info Default 开始扫描条带； [14/265] 2025-08-31 07:32:18.408 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:32:18.410 [Thd =202] Info Default CaptureBeginX: 69.72881, CaptureBeginY:52.64902, CaptureEndX:-69.55006, CaptureEndY:52.64902, VectorBeginX:71.29370, VectorBeginY:52.64902, VectorEndX:-71.50655, VectorEndY:52.64902, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:32:18.410 [Thd =202] Info Default ***row:14, vectorBeginX:71.294, vectorBeginY:52.649, captureBeginX:69.729, captureBeginY:52.649, captureEndX:-69.550, captureEndY:52.649, vectorEndX:-71.507, vectorEndY:52.649 2025-08-31 07:32:18.411 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:18.413 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288117978152,EndPoint:69.5500604909215 2025-08-31 07:32:18.494 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:18 2025-08-31 07:32:18.513 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:18 2025-08-31 07:32:18.801 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:18.804 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_13_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:23.046 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:23 2025-08-31 07:32:23.075 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:23 2025-08-31 07:32:23.246 [Thd =33] Info Default Stripes are collected for data processing！strip_no:14 2025-08-31 07:32:23.247 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:23.247 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:23.248 [Thd =34] Info Default Stripes are collected for data processing！strip_no:14 2025-08-31 07:32:23.248 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:23.248 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:B_SourceLightType 2025-08-31 07:32:23.248 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:A_SourceLightType 2025-08-31 07:32:23.248 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,B_SourceLightType 2025-08-31 07:32:23.248 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,A_SourceLightType 2025-08-31 07:32:23.422 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;14/265, 2025-08-31 07:32:23.431 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:23.471 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:23.728 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:23.730 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_14_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:23.822 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 15 2025-08-31 07:32:23.822 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 15 2025-08-31 07:32:23.822 [Thd =302] Info Default 开始扫描条带； [15/265] 2025-08-31 07:32:23.831 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:32:23.834 [Thd =202] Info Default ***row:15, vectorBeginX:-71.507, vectorBeginY:52.221, captureBeginX:-69.887, captureBeginY:52.221, captureEndX:69.391, captureEndY:52.221, vectorEndX:71.294, vectorEndY:52.221 2025-08-31 07:32:23.834 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:23.836 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874818190847,EndPoint:-69.391390469652 2025-08-31 07:32:24.228 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:24.230 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_14_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:28.598 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:28 2025-08-31 07:32:28.618 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:28 2025-08-31 07:32:28.656 [Thd =34] Info Default Stripes are collected for data processing！strip_no:15 2025-08-31 07:32:28.656 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:28.656 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:28.656 [Thd =33] Info Default Stripes are collected for data processing！strip_no:15 2025-08-31 07:32:28.657 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:28.657 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:A_SourceLightType 2025-08-31 07:32:28.657 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:B_SourceLightType 2025-08-31 07:32:28.657 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,A_SourceLightType 2025-08-31 07:32:28.657 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,B_SourceLightType 2025-08-31 07:32:28.824 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;15/265, 2025-08-31 07:32:28.833 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:28.935 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:29.150 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:29.155 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_15_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:29.275 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 16 2025-08-31 07:32:29.275 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 16 2025-08-31 07:32:29.275 [Thd =209] Info Default 开始扫描条带； [16/265] 2025-08-31 07:32:29.284 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:32:29.287 [Thd =202] Info Default CaptureBeginX: 69.72881, CaptureBeginY:51.79240, CaptureEndX:-69.55006, CaptureEndY:51.79240, VectorBeginX:71.29370, VectorBeginY:51.79240, VectorEndX:-71.50655, VectorEndY:51.79240, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:32:29.287 [Thd =202] Info Default ***row:16, vectorBeginX:71.294, vectorBeginY:51.792, captureBeginX:69.729, captureBeginY:51.792, captureEndX:-69.550, captureEndY:51.792, vectorEndX:-71.507, vectorEndY:51.792 2025-08-31 07:32:29.287 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:29.288 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288095395144,EndPoint:69.5500627492223 2025-08-31 07:32:29.655 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:29.657 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_15_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:34.108 [Thd =33] Info Default Stripes are collected for data processing！strip_no:16 2025-08-31 07:32:34.108 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:34.108 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:34.108 [Thd =34] Info Default Stripes are collected for data processing！strip_no:16 2025-08-31 07:32:34.109 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:34.109 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:B_SourceLightType 2025-08-31 07:32:34.109 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:A_SourceLightType 2025-08-31 07:32:34.109 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,B_SourceLightType 2025-08-31 07:32:34.109 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,A_SourceLightType 2025-08-31 07:32:34.282 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;16/265, 2025-08-31 07:32:34.291 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:34.358 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:34.608 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:34.626 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_16_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:34.696 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 17 2025-08-31 07:32:34.696 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 17 2025-08-31 07:32:34.696 [Thd =209] Info Default 开始扫描条带； [17/265] 2025-08-31 07:32:34.705 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:32:34.708 [Thd =202] Info Default ***row:17, vectorBeginX:-71.507, vectorBeginY:51.364, captureBeginX:-69.887, captureBeginY:51.364, captureEndX:69.391, captureEndY:51.364, vectorEndX:71.294, vectorEndY:51.364 2025-08-31 07:32:34.708 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:34.710 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.887461250237,EndPoint:-69.3914110384996 2025-08-31 07:32:35.132 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:35.136 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_16_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:35.141 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:35 2025-08-31 07:32:35.161 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:35 2025-08-31 07:32:39.532 [Thd =34] Info Default Stripes are collected for data processing！strip_no:17 2025-08-31 07:32:39.532 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:39.532 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:39.532 [Thd =33] Info Default Stripes are collected for data processing！strip_no:17 2025-08-31 07:32:39.532 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:39.533 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:A_SourceLightType 2025-08-31 07:32:39.533 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:B_SourceLightType 2025-08-31 07:32:39.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,A_SourceLightType 2025-08-31 07:32:39.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,B_SourceLightType 2025-08-31 07:32:39.723 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;17/265, 2025-08-31 07:32:39.732 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:39.777 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:40.032 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:40.035 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_17_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:40.116 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 18 2025-08-31 07:32:40.117 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 18 2025-08-31 07:32:40.117 [Thd =193] Info Default 开始扫描条带； [18/265] 2025-08-31 07:32:40.126 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:32:40.128 [Thd =202] Info Default CaptureBeginX: 69.72887, CaptureBeginY:50.93578, CaptureEndX:-69.55000, CaptureEndY:50.93578, VectorBeginX:71.29376, VectorBeginY:50.93578, VectorEndX:-71.50649, VectorEndY:50.93578, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:32:40.129 [Thd =202] Info Default ***row:18, vectorBeginX:71.294, vectorBeginY:50.936, captureBeginX:69.729, captureBeginY:50.936, captureEndX:-69.550, captureEndY:50.936, vectorEndX:-71.506, vectorEndY:50.936 2025-08-31 07:32:40.129 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:40.130 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288739316042,EndPoint:69.5499983571324 2025-08-31 07:32:40.554 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:40.558 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_17_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:41.690 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:41 2025-08-31 07:32:41.715 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:41 2025-08-31 07:32:44.740 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:44 2025-08-31 07:32:44.761 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:44 2025-08-31 07:32:44.948 [Thd =33] Info Default Stripes are collected for data processing！strip_no:18 2025-08-31 07:32:44.948 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:44.948 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:44.949 [Thd =34] Info Default Stripes are collected for data processing！strip_no:18 2025-08-31 07:32:44.949 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:44.950 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:B_SourceLightType 2025-08-31 07:32:44.950 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:A_SourceLightType 2025-08-31 07:32:44.950 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,B_SourceLightType 2025-08-31 07:32:44.950 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,A_SourceLightType 2025-08-31 07:32:45.126 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;18/265, 2025-08-31 07:32:45.135 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:45.176 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:45.429 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:45.431 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_18_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:45.524 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 19 2025-08-31 07:32:45.524 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 19 2025-08-31 07:32:45.524 [Thd =311] Info Default 开始扫描条带； [19/265] 2025-08-31 07:32:45.533 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:32:45.536 [Thd =202] Info Default ***row:19, vectorBeginX:-71.506, vectorBeginY:50.507, captureBeginX:-69.887, captureBeginY:50.507, captureEndX:69.391, captureEndY:50.507, vectorEndX:71.294, vectorEndY:50.507 2025-08-31 07:32:45.536 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:45.538 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874276809011,EndPoint:-69.3914446078356 2025-08-31 07:32:45.930 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:45.934 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_18_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:50.360 [Thd =33] Info Default Stripes are collected for data processing！strip_no:19 2025-08-31 07:32:50.360 [Thd =34] Info Default Stripes are collected for data processing！strip_no:19 2025-08-31 07:32:50.361 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:50.361 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:50.361 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:50.361 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:A_SourceLightType 2025-08-31 07:32:50.361 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:B_SourceLightType 2025-08-31 07:32:50.361 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,A_SourceLightType 2025-08-31 07:32:50.361 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,B_SourceLightType 2025-08-31 07:32:50.531 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;19/265, 2025-08-31 07:32:50.541 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:50.649 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:50.788 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:50 2025-08-31 07:32:50.811 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:50 2025-08-31 07:32:50.845 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:50.847 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_19_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:50.986 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 20 2025-08-31 07:32:50.986 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 20 2025-08-31 07:32:50.986 [Thd =322] Info Default 开始扫描条带； [20/265] 2025-08-31 07:32:50.995 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:32:50.998 [Thd =202] Info Default CaptureBeginX: 69.72884, CaptureBeginY:50.07916, CaptureEndX:-69.55003, CaptureEndY:50.07916, VectorBeginX:71.29373, VectorBeginY:50.07916, VectorEndX:-71.50652, VectorEndY:50.07916, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:32:50.998 [Thd =202] Info Default ***row:20, vectorBeginX:71.294, vectorBeginY:50.079, captureBeginX:69.729, captureBeginY:50.079, captureEndX:-69.550, captureEndY:50.079, vectorEndX:-71.507, vectorEndY:50.079 2025-08-31 07:32:50.998 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:51.000 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288394467409,EndPoint:69.5500328419957 2025-08-31 07:32:51.345 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:51.349 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_19_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:55.819 [Thd =34] Info Default Stripes are collected for data processing！strip_no:20 2025-08-31 07:32:55.819 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:55.819 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:32:55.819 [Thd =33] Info Default Stripes are collected for data processing！strip_no:20 2025-08-31 07:32:55.819 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:32:55.819 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:A_SourceLightType 2025-08-31 07:32:55.819 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:B_SourceLightType 2025-08-31 07:32:55.819 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,A_SourceLightType 2025-08-31 07:32:55.819 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,B_SourceLightType 2025-08-31 07:32:55.828 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:32:55 2025-08-31 07:32:55.850 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:32:55 2025-08-31 07:32:55.990 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;20/265, 2025-08-31 07:32:55.999 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:32:56.043 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:32:56.303 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:32:56.305 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_20_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:32:56.384 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 21 2025-08-31 07:32:56.384 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 21 2025-08-31 07:32:56.384 [Thd =320] Info Default 开始扫描条带； [21/265] 2025-08-31 07:32:56.394 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:32:56.397 [Thd =202] Info Default ***row:21, vectorBeginX:-71.506, vectorBeginY:49.651, captureBeginX:-69.887, captureBeginY:49.651, captureEndX:69.391, captureEndY:49.651, vectorEndX:71.294, vectorEndY:49.651 2025-08-31 07:32:56.397 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:32:56.399 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874318312917,EndPoint:-69.3914404574449 2025-08-31 07:32:56.809 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:32:56.811 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_20_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:01.218 [Thd =34] Info Default Stripes are collected for data processing！strip_no:21 2025-08-31 07:33:01.219 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:01.219 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:01.219 [Thd =33] Info Default Stripes are collected for data processing！strip_no:21 2025-08-31 07:33:01.219 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:01.219 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:A_SourceLightType 2025-08-31 07:33:01.220 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:B_SourceLightType 2025-08-31 07:33:01.220 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,A_SourceLightType 2025-08-31 07:33:01.220 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,B_SourceLightType 2025-08-31 07:33:01.394 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;21/265, 2025-08-31 07:33:01.403 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:01.454 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:01.709 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:01.712 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_21_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:01.795 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 22 2025-08-31 07:33:01.795 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 22 2025-08-31 07:33:01.795 [Thd =273] Info Default 开始扫描条带； [22/265] 2025-08-31 07:33:01.804 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:33:01.807 [Thd =202] Info Default CaptureBeginX: 69.72888, CaptureBeginY:49.22253, CaptureEndX:-69.54999, CaptureEndY:49.22253, VectorBeginX:71.29377, VectorBeginY:49.22253, VectorEndX:-71.50648, VectorEndY:49.22253, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:33:01.807 [Thd =202] Info Default ***row:22, vectorBeginX:71.294, vectorBeginY:49.223, captureBeginX:69.729, captureBeginY:49.223, captureEndX:-69.550, captureEndY:49.223, vectorEndX:-71.506, vectorEndY:49.223 2025-08-31 07:33:01.807 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:01.810 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288794858034,EndPoint:69.5499928029332 2025-08-31 07:33:01.872 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:01 2025-08-31 07:33:01.906 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:01 2025-08-31 07:33:02.247 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:02.250 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_21_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:06.431 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:06 2025-08-31 07:33:06.453 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:06 2025-08-31 07:33:06.627 [Thd =34] Info Default Stripes are collected for data processing！strip_no:22 2025-08-31 07:33:06.627 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:06.627 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:06.627 [Thd =33] Info Default Stripes are collected for data processing！strip_no:22 2025-08-31 07:33:06.627 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:06.627 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:A_SourceLightType 2025-08-31 07:33:06.628 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:B_SourceLightType 2025-08-31 07:33:06.628 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,A_SourceLightType 2025-08-31 07:33:06.628 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,B_SourceLightType 2025-08-31 07:33:06.805 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;22/265, 2025-08-31 07:33:06.821 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:06.894 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:07.114 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:07.131 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_22_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:07.234 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 23 2025-08-31 07:33:07.234 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 23 2025-08-31 07:33:07.234 [Thd =311] Info Default 开始扫描条带； [23/265] 2025-08-31 07:33:07.252 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:33:07.255 [Thd =202] Info Default ***row:23, vectorBeginX:-71.506, vectorBeginY:48.794, captureBeginX:-69.887, captureBeginY:48.794, captureEndX:69.391, captureEndY:48.794, vectorEndX:71.294, vectorEndY:48.794 2025-08-31 07:33:07.255 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:07.256 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874249343191,EndPoint:-69.3914473544176 2025-08-31 07:33:07.631 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:07.633 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_22_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:12.087 [Thd =33] Info Default Stripes are collected for data processing！strip_no:23 2025-08-31 07:33:12.087 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:12.087 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:12.087 [Thd =34] Info Default Stripes are collected for data processing！strip_no:23 2025-08-31 07:33:12.088 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:12.088 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:B_SourceLightType 2025-08-31 07:33:12.088 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:A_SourceLightType 2025-08-31 07:33:12.088 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,B_SourceLightType 2025-08-31 07:33:12.088 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,A_SourceLightType 2025-08-31 07:33:12.259 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;23/265, 2025-08-31 07:33:12.268 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:12.332 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:12.481 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:12 2025-08-31 07:33:12.500 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:12 2025-08-31 07:33:12.583 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:12.586 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_23_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:12.671 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 24 2025-08-31 07:33:12.671 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 24 2025-08-31 07:33:12.671 [Thd =273] Info Default 开始扫描条带； [24/265] 2025-08-31 07:33:12.688 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:33:12.691 [Thd =202] Info Default CaptureBeginX: 69.72886, CaptureBeginY:48.36592, CaptureEndX:-69.55002, CaptureEndY:48.36592, VectorBeginX:71.29374, VectorBeginY:48.36592, VectorEndX:-71.50651, VectorEndY:48.36592, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:33:12.691 [Thd =202] Info Default ***row:24, vectorBeginX:71.294, vectorBeginY:48.366, captureBeginX:69.729, captureBeginY:48.366, captureEndX:-69.550, captureEndY:48.366, vectorEndX:-71.507, vectorEndY:48.366 2025-08-31 07:33:12.691 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:12.693 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288553769167,EndPoint:69.5500169118199 2025-08-31 07:33:13.092 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:13.094 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_23_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:17.525 [Thd =33] Info Default Stripes are collected for data processing！strip_no:24 2025-08-31 07:33:17.525 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:17.525 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:17.526 [Thd =34] Info Default Stripes are collected for data processing！strip_no:24 2025-08-31 07:33:17.527 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:17.527 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:B_SourceLightType 2025-08-31 07:33:17.527 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:A_SourceLightType 2025-08-31 07:33:17.527 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,B_SourceLightType 2025-08-31 07:33:17.527 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,A_SourceLightType 2025-08-31 07:33:17.698 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;24/265, 2025-08-31 07:33:17.707 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:17.758 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:18.011 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:18.015 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_24_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:18.019 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:18 2025-08-31 07:33:18.030 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:18 2025-08-31 07:33:18.099 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 25 2025-08-31 07:33:18.099 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 25 2025-08-31 07:33:18.099 [Thd =322] Info Default 开始扫描条带； [25/265] 2025-08-31 07:33:18.116 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:33:18.119 [Thd =202] Info Default ***row:25, vectorBeginX:-71.507, vectorBeginY:47.938, captureBeginX:-69.887, captureBeginY:47.938, captureEndX:69.391, captureEndY:47.938, vectorEndX:71.294, vectorEndY:47.938 2025-08-31 07:33:18.119 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:18.120 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874521559987,EndPoint:-69.3914201327379 2025-08-31 07:33:18.511 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:18.515 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_24_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:22.959 [Thd =34] Info Default Stripes are collected for data processing！strip_no:25 2025-08-31 07:33:22.959 [Thd =33] Info Default Stripes are collected for data processing！strip_no:25 2025-08-31 07:33:22.960 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:22.960 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:22.960 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:22.960 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:A_SourceLightType 2025-08-31 07:33:22.960 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:B_SourceLightType 2025-08-31 07:33:22.960 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,A_SourceLightType 2025-08-31 07:33:22.960 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,B_SourceLightType 2025-08-31 07:33:23.119 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;25/265, 2025-08-31 07:33:23.128 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:23.182 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:23.443 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:23.446 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_25_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:23.523 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 26 2025-08-31 07:33:23.523 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 26 2025-08-31 07:33:23.523 [Thd =332] Info Default 开始扫描条带； [26/265] 2025-08-31 07:33:23.532 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:33:23.535 [Thd =202] Info Default CaptureBeginX: 69.72886, CaptureBeginY:47.50930, CaptureEndX:-69.55001, CaptureEndY:47.50930, VectorBeginX:71.29375, VectorBeginY:47.50930, VectorEndX:-71.50650, VectorEndY:47.50930, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:33:23.535 [Thd =202] Info Default ***row:26, vectorBeginX:71.294, vectorBeginY:47.509, captureBeginX:69.729, captureBeginY:47.509, captureEndX:-69.550, captureEndY:47.509, vectorEndX:-71.506, vectorEndY:47.509 2025-08-31 07:33:23.535 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:23.537 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288639218386,EndPoint:69.550008366898 2025-08-31 07:33:23.966 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:23.969 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_25_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:24.072 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:24 2025-08-31 07:33:24.085 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:24 2025-08-31 07:33:28.357 [Thd =34] Info Default Stripes are collected for data processing！strip_no:26 2025-08-31 07:33:28.358 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:28.358 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:28.358 [Thd =33] Info Default Stripes are collected for data processing！strip_no:26 2025-08-31 07:33:28.359 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:28.359 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:A_SourceLightType 2025-08-31 07:33:28.359 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:B_SourceLightType 2025-08-31 07:33:28.359 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,A_SourceLightType 2025-08-31 07:33:28.359 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,B_SourceLightType 2025-08-31 07:33:28.542 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;26/265, 2025-08-31 07:33:28.551 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:28.602 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:28.626 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:28 2025-08-31 07:33:28.636 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:28 2025-08-31 07:33:28.858 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:28.861 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_26_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:28.937 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 27 2025-08-31 07:33:28.937 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 27 2025-08-31 07:33:28.937 [Thd =193] Info Default 开始扫描条带； [27/265] 2025-08-31 07:33:28.954 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:33:28.957 [Thd =202] Info Default ***row:27, vectorBeginX:-71.506, vectorBeginY:47.081, captureBeginX:-69.887, captureBeginY:47.081, captureEndX:69.391, captureEndY:47.081, vectorEndX:71.294, vectorEndY:47.081 2025-08-31 07:33:28.957 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:28.960 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874104079519,EndPoint:-69.3914618807848 2025-08-31 07:33:29.366 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:29.369 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_26_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:33.784 [Thd =34] Info Default Stripes are collected for data processing！strip_no:27 2025-08-31 07:33:33.784 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:33.784 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:33.784 [Thd =33] Info Default Stripes are collected for data processing！strip_no:27 2025-08-31 07:33:33.784 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:33.785 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:A_SourceLightType 2025-08-31 07:33:33.785 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,A_SourceLightType 2025-08-31 07:33:33.785 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:B_SourceLightType 2025-08-31 07:33:33.785 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,B_SourceLightType 2025-08-31 07:33:33.963 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;27/265, 2025-08-31 07:33:33.972 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:34.033 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:34.164 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:34 2025-08-31 07:33:34.182 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:34 2025-08-31 07:33:34.284 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:34.286 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_27_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:34.377 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 28 2025-08-31 07:33:34.377 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 28 2025-08-31 07:33:34.377 [Thd =322] Info Default 开始扫描条带； [28/265] 2025-08-31 07:33:34.407 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:33:34.410 [Thd =202] Info Default CaptureBeginX: 69.72888, CaptureBeginY:46.65268, CaptureEndX:-69.54999, CaptureEndY:46.65268, VectorBeginX:71.29377, VectorBeginY:46.65268, VectorEndX:-71.50648, VectorEndY:46.65268, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:33:34.410 [Thd =202] Info Default ***row:28, vectorBeginX:71.294, vectorBeginY:46.653, captureBeginX:69.729, captureBeginY:46.653, captureEndX:-69.550, captureEndY:46.653, vectorEndX:-71.506, vectorEndY:46.653 2025-08-31 07:33:34.410 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:34.413 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288797299441,EndPoint:69.5499925587926 2025-08-31 07:33:34.786 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:34.788 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_27_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:39.234 [Thd =34] Info Default Stripes are collected for data processing！strip_no:28 2025-08-31 07:33:39.235 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:39.235 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:39.235 [Thd =33] Info Default Stripes are collected for data processing！strip_no:28 2025-08-31 07:33:39.235 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:39.235 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:A_SourceLightType 2025-08-31 07:33:39.235 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:B_SourceLightType 2025-08-31 07:33:39.236 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,A_SourceLightType 2025-08-31 07:33:39.236 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,B_SourceLightType 2025-08-31 07:33:39.412 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;28/265, 2025-08-31 07:33:39.421 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:39.475 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:39.719 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:39.735 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_28_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:39.735 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:39 2025-08-31 07:33:39.749 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:39 2025-08-31 07:33:39.810 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 29 2025-08-31 07:33:39.810 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 29 2025-08-31 07:33:39.810 [Thd =261] Info Default 开始扫描条带； [29/265] 2025-08-31 07:33:39.820 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:33:39.822 [Thd =202] Info Default ***row:29, vectorBeginX:-71.506, vectorBeginY:46.224, captureBeginX:-69.887, captureBeginY:46.224, captureEndX:69.391, captureEndY:46.224, vectorEndX:71.294, vectorEndY:46.224 2025-08-31 07:33:39.822 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:39.824 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8874145583425,EndPoint:-69.3914577303941 2025-08-31 07:33:40.241 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:40.244 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_28_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:44.644 [Thd =33] Info Default Stripes are collected for data processing！strip_no:29 2025-08-31 07:33:44.644 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:44.644 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:44.646 [Thd =34] Info Default Stripes are collected for data processing！strip_no:29 2025-08-31 07:33:44.646 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:44.646 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:B_SourceLightType 2025-08-31 07:33:44.646 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:A_SourceLightType 2025-08-31 07:33:44.646 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,B_SourceLightType 2025-08-31 07:33:44.646 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,A_SourceLightType 2025-08-31 07:33:44.835 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;29/265, 2025-08-31 07:33:44.845 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:44.887 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:45.139 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:45.141 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_29_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:45.240 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 30 2025-08-31 07:33:45.240 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 30 2025-08-31 07:33:45.240 [Thd =299] Info Default 开始扫描条带； [30/265] 2025-08-31 07:33:45.264 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:33:45.266 [Thd =202] Info Default CaptureBeginX: 69.72890, CaptureBeginY:45.79606, CaptureEndX:-69.54997, CaptureEndY:45.79606, VectorBeginX:71.29379, VectorBeginY:45.79606, VectorEndX:-71.50646, VectorEndY:45.79606, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:33:45.266 [Thd =202] Info Default ***row:30, vectorBeginX:71.294, vectorBeginY:45.796, captureBeginX:69.729, captureBeginY:45.796, captureEndX:-69.550, captureEndY:45.796, vectorEndX:-71.506, vectorEndY:45.796 2025-08-31 07:33:45.267 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:45.269 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7288984067019,EndPoint:69.5499738820348 2025-08-31 07:33:45.276 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:45 2025-08-31 07:33:45.295 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:45 2025-08-31 07:33:45.642 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:45.644 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_29_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:49.812 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:49 2025-08-31 07:33:49.833 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:49 2025-08-31 07:33:50.105 [Thd =34] Info Default Stripes are collected for data processing！strip_no:30 2025-08-31 07:33:50.105 [Thd =33] Info Default Stripes are collected for data processing！strip_no:30 2025-08-31 07:33:50.105 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:50.105 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:50.105 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:50.105 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:B_SourceLightType 2025-08-31 07:33:50.105 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:A_SourceLightType 2025-08-31 07:33:50.105 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,B_SourceLightType 2025-08-31 07:33:50.105 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,A_SourceLightType 2025-08-31 07:33:50.273 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;30/265, 2025-08-31 07:33:50.283 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:50.319 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:50.591 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:50.594 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_30_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:50.671 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 31 2025-08-31 07:33:50.671 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 31 2025-08-31 07:33:50.671 [Thd =300] Info Default 开始扫描条带； [31/265] 2025-08-31 07:33:50.688 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:33:50.691 [Thd =202] Info Default ***row:31, vectorBeginX:-71.506, vectorBeginY:45.368, captureBeginX:-69.887, captureBeginY:45.368, captureEndX:69.391, captureEndY:45.368, vectorEndX:71.294, vectorEndY:45.368 2025-08-31 07:33:50.691 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:50.694 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8873885573659,EndPoint:-69.3914837313707 2025-08-31 07:33:51.090 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:51.093 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_30_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:55.527 [Thd =34] Info Default Stripes are collected for data processing！strip_no:31 2025-08-31 07:33:55.527 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:55.527 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:33:55.528 [Thd =33] Info Default Stripes are collected for data processing！strip_no:31 2025-08-31 07:33:55.528 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:33:55.529 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:A_SourceLightType 2025-08-31 07:33:55.529 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:B_SourceLightType 2025-08-31 07:33:55.529 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,A_SourceLightType 2025-08-31 07:33:55.529 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,B_SourceLightType 2025-08-31 07:33:55.695 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;31/265, 2025-08-31 07:33:55.704 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:33:55.755 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:33:56.017 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:33:56.020 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_31_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:33:56.108 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 32 2025-08-31 07:33:56.108 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 32 2025-08-31 07:33:56.108 [Thd =340] Info Default 开始扫描条带； [32/265] 2025-08-31 07:33:56.124 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:33:56.127 [Thd =202] Info Default CaptureBeginX: 69.72895, CaptureBeginY:44.93945, CaptureEndX:-69.54992, CaptureEndY:44.93945, VectorBeginX:71.29384, VectorBeginY:44.93945, VectorEndX:-71.50641, VectorEndY:44.93945, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:33:56.127 [Thd =202] Info Default ***row:32, vectorBeginX:71.294, vectorBeginY:44.939, captureBeginX:69.729, captureBeginY:44.939, captureEndX:-69.550, captureEndY:44.939, vectorEndX:-71.506, vectorEndY:44.939 2025-08-31 07:33:56.127 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:33:56.130 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7289512631472,EndPoint:69.5499210255895 2025-08-31 07:33:56.358 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:33:56 2025-08-31 07:33:56.369 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:33:56 2025-08-31 07:33:56.534 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:33:56.537 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_31_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:00.897 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:00 2025-08-31 07:34:00.908 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:00 2025-08-31 07:34:00.950 [Thd =34] Info Default Stripes are collected for data processing！strip_no:32 2025-08-31 07:34:00.950 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:00.950 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:00.950 [Thd =33] Info Default Stripes are collected for data processing！strip_no:32 2025-08-31 07:34:00.950 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:00.951 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:A_SourceLightType 2025-08-31 07:34:00.951 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:B_SourceLightType 2025-08-31 07:34:00.951 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,A_SourceLightType 2025-08-31 07:34:00.951 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,B_SourceLightType 2025-08-31 07:34:01.128 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;32/265, 2025-08-31 07:34:01.137 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:01.175 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:01.442 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:01.460 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_32_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:01.511 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 33 2025-08-31 07:34:01.511 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 33 2025-08-31 07:34:01.511 [Thd =320] Info Default 开始扫描条带； [33/265] 2025-08-31 07:34:01.520 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:34:01.523 [Thd =202] Info Default ***row:33, vectorBeginX:-71.506, vectorBeginY:44.511, captureBeginX:-69.887, captureBeginY:44.511, captureEndX:69.392, captureEndY:44.511, vectorEndX:71.294, vectorEndY:44.511 2025-08-31 07:34:01.523 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:01.525 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8873464431081,EndPoint:-69.3915258456285 2025-08-31 07:34:01.973 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:01.975 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_32_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:06.356 [Thd =33] Info Default Stripes are collected for data processing！strip_no:33 2025-08-31 07:34:06.356 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:06.356 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:06.361 [Thd =34] Info Default Stripes are collected for data processing！strip_no:33 2025-08-31 07:34:06.361 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:06.361 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:B_SourceLightType 2025-08-31 07:34:06.361 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:A_SourceLightType 2025-08-31 07:34:06.361 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,B_SourceLightType 2025-08-31 07:34:06.361 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,A_SourceLightType 2025-08-31 07:34:06.525 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;33/265, 2025-08-31 07:34:06.534 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:06.579 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:06.846 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:06.848 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_33_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:06.925 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 34 2025-08-31 07:34:06.926 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 34 2025-08-31 07:34:06.926 [Thd =209] Info Default 开始扫描条带； [34/265] 2025-08-31 07:34:06.931 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:06 2025-08-31 07:34:06.935 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:34:06.938 [Thd =202] Info Default CaptureBeginX: 69.72896, CaptureBeginY:44.08283, CaptureEndX:-69.54991, CaptureEndY:44.08283, VectorBeginX:71.29385, VectorBeginY:44.08283, VectorEndX:-71.50640, VectorEndY:44.08283, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:34:06.938 [Thd =202] Info Default ***row:34, vectorBeginX:71.294, vectorBeginY:44.083, captureBeginX:69.729, captureBeginY:44.083, captureEndX:-69.550, captureEndY:44.083, vectorEndX:-71.506, vectorEndY:44.083 2025-08-31 07:34:06.938 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:06.939 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7289596859987,EndPoint:69.5499126027379 2025-08-31 07:34:06.942 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:06 2025-08-31 07:34:07.367 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:07.369 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_33_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:11.757 [Thd =34] Info Default Stripes are collected for data processing！strip_no:34 2025-08-31 07:34:11.758 [Thd =33] Info Default Stripes are collected for data processing！strip_no:34 2025-08-31 07:34:11.758 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:11.758 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:11.758 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:11.758 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:B_SourceLightType 2025-08-31 07:34:11.758 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:A_SourceLightType 2025-08-31 07:34:11.758 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,B_SourceLightType 2025-08-31 07:34:11.758 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,A_SourceLightType 2025-08-31 07:34:11.939 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;34/265, 2025-08-31 07:34:11.948 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:11.959 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:11 2025-08-31 07:34:11.975 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:11 2025-08-31 07:34:12.007 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:12.267 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:12.270 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_34_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:12.344 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 35 2025-08-31 07:34:12.344 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 35 2025-08-31 07:34:12.344 [Thd =340] Info Default 开始扫描条带； [35/265] 2025-08-31 07:34:12.353 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:34:12.356 [Thd =202] Info Default ***row:35, vectorBeginX:-71.506, vectorBeginY:43.655, captureBeginX:-69.887, captureBeginY:43.655, captureEndX:69.392, captureEndY:43.655, vectorEndX:71.294, vectorEndY:43.655 2025-08-31 07:34:12.356 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:12.358 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8873334426198,EndPoint:-69.3915388461168 2025-08-31 07:34:12.770 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:12.772 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_34_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:17.194 [Thd =33] Info Default Stripes are collected for data processing！strip_no:35 2025-08-31 07:34:17.194 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:17.194 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:17.198 [Thd =34] Info Default Stripes are collected for data processing！strip_no:35 2025-08-31 07:34:17.198 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:17.198 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:B_SourceLightType 2025-08-31 07:34:17.198 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:A_SourceLightType 2025-08-31 07:34:17.198 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,B_SourceLightType 2025-08-31 07:34:17.198 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,A_SourceLightType 2025-08-31 07:34:17.369 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;35/265, 2025-08-31 07:34:17.386 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:17.425 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:17.691 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:17.694 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_35_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:17.763 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 36 2025-08-31 07:34:17.763 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 36 2025-08-31 07:34:17.763 [Thd =322] Info Default 开始扫描条带； [36/265] 2025-08-31 07:34:17.779 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:34:17.795 [Thd =202] Info Default CaptureBeginX: 69.72902, CaptureBeginY:43.22622, CaptureEndX:-69.54985, CaptureEndY:43.22622, VectorBeginX:71.29391, VectorBeginY:43.22622, VectorEndX:-71.50634, VectorEndY:43.22622, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:34:17.795 [Thd =202] Info Default ***row:36, vectorBeginX:71.294, vectorBeginY:43.226, captureBeginX:69.729, captureBeginY:43.226, captureEndX:-69.550, captureEndY:43.226, vectorEndX:-71.506, vectorEndY:43.226 2025-08-31 07:34:17.795 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:17.798 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7290225522097,EndPoint:69.549849736527 2025-08-31 07:34:18.012 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:18 2025-08-31 07:34:18.023 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:18 2025-08-31 07:34:18.207 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:18.210 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_35_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:22.553 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:22 2025-08-31 07:34:22.574 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:22 2025-08-31 07:34:22.623 [Thd =33] Info Default Stripes are collected for data processing！strip_no:36 2025-08-31 07:34:22.623 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:22.623 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:22.623 [Thd =34] Info Default Stripes are collected for data processing！strip_no:36 2025-08-31 07:34:22.624 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:22.624 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:B_SourceLightType 2025-08-31 07:34:22.624 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,B_SourceLightType 2025-08-31 07:34:22.624 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,A_SourceLightType 2025-08-31 07:34:22.624 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:A_SourceLightType 2025-08-31 07:34:22.803 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;36/265, 2025-08-31 07:34:22.825 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:23.009 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:23.120 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:23.123 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_36_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:23.363 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 37 2025-08-31 07:34:23.363 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 37 2025-08-31 07:34:23.363 [Thd =273] Info Default 开始扫描条带； [37/265] 2025-08-31 07:34:23.373 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:34:23.375 [Thd =202] Info Default ***row:37, vectorBeginX:-71.506, vectorBeginY:42.798, captureBeginX:-69.887, captureBeginY:42.798, captureEndX:69.392, captureEndY:42.798, vectorEndX:71.294, vectorEndY:42.798 2025-08-31 07:34:23.375 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:23.377 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8872629470144,EndPoint:-69.3916093417223 2025-08-31 07:34:23.609 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:23.611 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_36_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:28.228 [Thd =34] Info Default Stripes are collected for data processing！strip_no:37 2025-08-31 07:34:28.228 [Thd =33] Info Default Stripes are collected for data processing！strip_no:37 2025-08-31 07:34:28.228 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:28.229 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:28.229 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:28.229 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:B_SourceLightType 2025-08-31 07:34:28.229 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:A_SourceLightType 2025-08-31 07:34:28.229 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,B_SourceLightType 2025-08-31 07:34:28.229 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,A_SourceLightType 2025-08-31 07:34:28.385 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;37/265, 2025-08-31 07:34:28.394 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:28.444 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:28.725 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:28.727 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_37_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:28.788 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 38 2025-08-31 07:34:28.788 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 38 2025-08-31 07:34:28.788 [Thd =340] Info Default 开始扫描条带； [38/265] 2025-08-31 07:34:28.798 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:34:28.800 [Thd =202] Info Default CaptureBeginX: 69.72907, CaptureBeginY:42.36960, CaptureEndX:-69.54980, CaptureEndY:42.36960, VectorBeginX:71.29396, VectorBeginY:42.36960, VectorEndX:-71.50629, VectorEndY:42.36960, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:34:28.800 [Thd =202] Info Default ***row:38, vectorBeginX:71.294, vectorBeginY:42.370, captureBeginX:69.729, captureBeginY:42.370, captureEndX:-69.550, captureEndY:42.370, vectorEndX:-71.506, vectorEndY:42.370 2025-08-31 07:34:28.800 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:28.802 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7290696103152,EndPoint:69.5498026784215 2025-08-31 07:34:29.116 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:29 2025-08-31 07:34:29.128 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:29 2025-08-31 07:34:29.240 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:29.243 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_37_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:33.624 [Thd =33] Info Default Stripes are collected for data processing！strip_no:38 2025-08-31 07:34:33.624 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:33.624 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:33.625 [Thd =34] Info Default Stripes are collected for data processing！strip_no:38 2025-08-31 07:34:33.625 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:33.626 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:B_SourceLightType 2025-08-31 07:34:33.626 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:A_SourceLightType 2025-08-31 07:34:33.626 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,B_SourceLightType 2025-08-31 07:34:33.626 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,A_SourceLightType 2025-08-31 07:34:33.650 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:33 2025-08-31 07:34:33.670 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:33 2025-08-31 07:34:33.804 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;38/265, 2025-08-31 07:34:33.813 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:33.848 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:34.103 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:34.105 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_38_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:34.188 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 39 2025-08-31 07:34:34.188 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 39 2025-08-31 07:34:34.188 [Thd =340] Info Default 开始扫描条带； [39/265] 2025-08-31 07:34:34.197 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:34:34.200 [Thd =202] Info Default ***row:39, vectorBeginX:-71.506, vectorBeginY:41.941, captureBeginX:-69.887, captureBeginY:41.941, captureEndX:69.392, captureEndY:41.941, vectorEndX:71.294, vectorEndY:41.941 2025-08-31 07:34:34.200 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:34.201 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8871861037527,EndPoint:-69.391686184984 2025-08-31 07:34:34.602 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:34.604 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_38_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:39.022 [Thd =34] Info Default Stripes are collected for data processing！strip_no:39 2025-08-31 07:34:39.022 [Thd =33] Info Default Stripes are collected for data processing！strip_no:39 2025-08-31 07:34:39.022 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:39.022 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:39.022 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:39.022 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:B_SourceLightType 2025-08-31 07:34:39.022 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,B_SourceLightType 2025-08-31 07:34:39.022 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,A_SourceLightType 2025-08-31 07:34:39.023 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:A_SourceLightType 2025-08-31 07:34:39.200 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;39/265, 2025-08-31 07:34:39.201 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:39 2025-08-31 07:34:39.209 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:39.222 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:39 2025-08-31 07:34:39.259 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:39.517 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:39.520 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_39_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:39.604 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 40 2025-08-31 07:34:39.604 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 40 2025-08-31 07:34:39.604 [Thd =337] Info Default 开始扫描条带； [40/265] 2025-08-31 07:34:39.613 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:34:39.616 [Thd =202] Info Default CaptureBeginX: 69.72913, CaptureBeginY:41.51298, CaptureEndX:-69.54974, CaptureEndY:41.51298, VectorBeginX:71.29402, VectorBeginY:41.51298, VectorEndX:-71.50623, VectorEndY:41.51298, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:34:39.616 [Thd =202] Info Default ***row:40, vectorBeginX:71.294, vectorBeginY:41.513, captureBeginX:69.729, captureBeginY:41.513, captureEndX:-69.550, captureEndY:41.513, vectorEndX:-71.506, vectorEndY:41.513 2025-08-31 07:34:39.616 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:39.617 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7291291195925,EndPoint:69.5497431691441 2025-08-31 07:34:40.023 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:40.025 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_39_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:44.257 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:44 2025-08-31 07:34:44.279 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:44 2025-08-31 07:34:44.448 [Thd =34] Info Default Stripes are collected for data processing！strip_no:40 2025-08-31 07:34:44.449 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:44.449 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:44.449 [Thd =33] Info Default Stripes are collected for data processing！strip_no:40 2025-08-31 07:34:44.449 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:44.449 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:A_SourceLightType 2025-08-31 07:34:44.449 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:B_SourceLightType 2025-08-31 07:34:44.449 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,A_SourceLightType 2025-08-31 07:34:44.449 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,B_SourceLightType 2025-08-31 07:34:44.622 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;40/265, 2025-08-31 07:34:44.631 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:44.684 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:44.934 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:44.936 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_40_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:45.023 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 41 2025-08-31 07:34:45.023 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 41 2025-08-31 07:34:45.023 [Thd =340] Info Default 开始扫描条带； [41/265] 2025-08-31 07:34:45.032 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:34:45.035 [Thd =202] Info Default ***row:41, vectorBeginX:-71.506, vectorBeginY:41.085, captureBeginX:-69.887, captureBeginY:41.085, captureEndX:69.392, captureEndY:41.085, vectorEndX:71.294, vectorEndY:41.085 2025-08-31 07:34:45.035 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:45.037 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8871543654714,EndPoint:-69.3917179232652 2025-08-31 07:34:45.437 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:45.440 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_40_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:49.863 [Thd =34] Info Default Stripes are collected for data processing！strip_no:41 2025-08-31 07:34:49.863 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:49.863 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:49.864 [Thd =33] Info Default Stripes are collected for data processing！strip_no:41 2025-08-31 07:34:49.864 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:49.864 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:A_SourceLightType 2025-08-31 07:34:49.864 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:B_SourceLightType 2025-08-31 07:34:49.864 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,A_SourceLightType 2025-08-31 07:34:49.865 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,B_SourceLightType 2025-08-31 07:34:50.039 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;41/265, 2025-08-31 07:34:50.049 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:50.105 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:50.353 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:50.356 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_41_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:50.445 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 42 2025-08-31 07:34:50.445 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 42 2025-08-31 07:34:50.445 [Thd =300] Info Default 开始扫描条带； [42/265] 2025-08-31 07:34:50.454 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:34:50.457 [Thd =202] Info Default CaptureBeginX: 69.72918, CaptureBeginY:40.65636, CaptureEndX:-69.54970, CaptureEndY:40.65636, VectorBeginX:71.29406, VectorBeginY:40.65636, VectorEndX:-71.50619, VectorEndY:40.65636, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:34:50.457 [Thd =202] Info Default ***row:42, vectorBeginX:71.294, vectorBeginY:40.656, captureBeginX:69.729, captureBeginY:40.656, captureEndX:-69.550, captureEndY:40.656, vectorEndX:-71.506, vectorEndY:40.656 2025-08-31 07:34:50.457 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:50.459 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.72917501803,EndPoint:69.5496972707066 2025-08-31 07:34:50.808 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:50 2025-08-31 07:34:50.819 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:50 2025-08-31 07:34:50.877 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:50.879 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_41_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:55.277 [Thd =34] Info Default Stripes are collected for data processing！strip_no:42 2025-08-31 07:34:55.277 [Thd =33] Info Default Stripes are collected for data processing！strip_no:42 2025-08-31 07:34:55.277 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:55.277 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:34:55.277 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:34:55.277 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:B_SourceLightType 2025-08-31 07:34:55.277 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:A_SourceLightType 2025-08-31 07:34:55.277 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,B_SourceLightType 2025-08-31 07:34:55.277 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,A_SourceLightType 2025-08-31 07:34:55.355 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:34:55 2025-08-31 07:34:55.366 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:34:55 2025-08-31 07:34:55.456 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;42/265, 2025-08-31 07:34:55.475 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:34:55.511 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:34:55.775 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:34:55.777 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_42_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:34:55.861 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 43 2025-08-31 07:34:55.861 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 43 2025-08-31 07:34:55.861 [Thd =320] Info Default 开始扫描条带； [43/265] 2025-08-31 07:34:55.870 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:34:55.873 [Thd =202] Info Default ***row:43, vectorBeginX:-71.506, vectorBeginY:40.228, captureBeginX:-69.887, captureBeginY:40.228, captureEndX:69.392, captureEndY:40.228, vectorEndX:71.294, vectorEndY:40.228 2025-08-31 07:34:55.873 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:34:55.876 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8871248854909,EndPoint:-69.3917474032457 2025-08-31 07:34:56.275 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:34:56.277 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_42_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:00.695 [Thd =34] Info Default Stripes are collected for data processing！strip_no:43 2025-08-31 07:35:00.696 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:00.696 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:00.696 [Thd =33] Info Default Stripes are collected for data processing！strip_no:43 2025-08-31 07:35:00.697 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:00.697 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:A_SourceLightType 2025-08-31 07:35:00.697 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:B_SourceLightType 2025-08-31 07:35:00.697 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,A_SourceLightType 2025-08-31 07:35:00.697 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,B_SourceLightType 2025-08-31 07:35:00.874 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;43/265, 2025-08-31 07:35:00.883 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:00.945 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:01.196 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:01.199 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_43_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:01.282 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 44 2025-08-31 07:35:01.282 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 44 2025-08-31 07:35:01.282 [Thd =193] Info Default 开始扫描条带； [44/265] 2025-08-31 07:35:01.291 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:35:01.294 [Thd =202] Info Default CaptureBeginX: 69.72917, CaptureBeginY:39.79973, CaptureEndX:-69.54970, CaptureEndY:39.79973, VectorBeginX:71.29406, VectorBeginY:39.79973, VectorEndX:-71.50619, VectorEndY:39.79973, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:35:01.294 [Thd =202] Info Default ***row:44, vectorBeginX:71.294, vectorBeginY:39.800, captureBeginX:69.729, captureBeginY:39.800, captureEndX:-69.550, captureEndY:39.800, vectorEndX:-71.506, vectorEndY:39.800 2025-08-31 07:35:01.295 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:01.297 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7291682431277,EndPoint:69.549704045609 2025-08-31 07:35:01.425 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:01 2025-08-31 07:35:01.451 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:01 2025-08-31 07:35:01.696 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:01.699 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_43_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:06.129 [Thd =34] Info Default Stripes are collected for data processing！strip_no:44 2025-08-31 07:35:06.129 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:06.129 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:06.130 [Thd =33] Info Default Stripes are collected for data processing！strip_no:44 2025-08-31 07:35:06.130 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:06.130 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:A_SourceLightType 2025-08-31 07:35:06.130 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:B_SourceLightType 2025-08-31 07:35:06.130 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,A_SourceLightType 2025-08-31 07:35:06.131 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,B_SourceLightType 2025-08-31 07:35:06.305 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;44/265, 2025-08-31 07:35:06.314 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:06.349 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:06.485 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:06 2025-08-31 07:35:06.503 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:06 2025-08-31 07:35:06.619 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:06.621 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_44_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:06.700 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 45 2025-08-31 07:35:06.700 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 45 2025-08-31 07:35:06.700 [Thd =332] Info Default 开始扫描条带； [45/265] 2025-08-31 07:35:06.715 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:35:06.718 [Thd =202] Info Default ***row:45, vectorBeginX:-71.506, vectorBeginY:39.371, captureBeginX:-69.887, captureBeginY:39.371, captureEndX:69.392, captureEndY:39.371, vectorEndX:71.294, vectorEndY:39.371 2025-08-31 07:35:06.718 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:06.719 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8871015700612,EndPoint:-69.3917707186754 2025-08-31 07:35:07.134 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:07.136 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_44_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:11.548 [Thd =34] Info Default Stripes are collected for data processing！strip_no:45 2025-08-31 07:35:11.548 [Thd =33] Info Default Stripes are collected for data processing！strip_no:45 2025-08-31 07:35:11.549 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:11.549 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:11.549 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:11.549 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:B_SourceLightType 2025-08-31 07:35:11.549 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:A_SourceLightType 2025-08-31 07:35:11.549 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,B_SourceLightType 2025-08-31 07:35:11.549 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,A_SourceLightType 2025-08-31 07:35:11.720 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;45/265, 2025-08-31 07:35:11.729 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:11.772 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:12.041 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:12 2025-08-31 07:35:12.043 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:12.046 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_45_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:12.057 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:12 2025-08-31 07:35:12.115 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 46 2025-08-31 07:35:12.115 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 46 2025-08-31 07:35:12.115 [Thd =320] Info Default 开始扫描条带； [46/265] 2025-08-31 07:35:12.124 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:35:12.127 [Thd =202] Info Default CaptureBeginX: 69.72924, CaptureBeginY:38.94312, CaptureEndX:-69.54963, CaptureEndY:38.94312, VectorBeginX:71.29413, VectorBeginY:38.94312, VectorEndX:-71.50612, VectorEndY:38.94312, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:35:12.127 [Thd =202] Info Default ***row:46, vectorBeginX:71.294, vectorBeginY:38.943, captureBeginX:69.729, captureBeginY:38.943, captureEndX:-69.550, captureEndY:38.943, vectorEndX:-71.506, vectorEndY:38.943 2025-08-31 07:35:12.127 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:12.129 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7292443539675,EndPoint:69.5496279347691 2025-08-31 07:35:12.568 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:12.570 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_45_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:16.947 [Thd =33] Info Default Stripes are collected for data processing！strip_no:46 2025-08-31 07:35:16.947 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:16.947 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:16.948 [Thd =34] Info Default Stripes are collected for data processing！strip_no:46 2025-08-31 07:35:16.948 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:16.948 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:B_SourceLightType 2025-08-31 07:35:16.948 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:A_SourceLightType 2025-08-31 07:35:16.948 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,B_SourceLightType 2025-08-31 07:35:16.948 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,A_SourceLightType 2025-08-31 07:35:17.073 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:17 2025-08-31 07:35:17.094 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:17 2025-08-31 07:35:17.122 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;46/265, 2025-08-31 07:35:17.137 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:17.189 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:17.432 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:17.449 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_46_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:17.526 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 47 2025-08-31 07:35:17.526 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 47 2025-08-31 07:35:17.526 [Thd =299] Info Default 开始扫描条带； [47/265] 2025-08-31 07:35:17.535 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:35:17.538 [Thd =202] Info Default ***row:47, vectorBeginX:-71.506, vectorBeginY:38.515, captureBeginX:-69.887, captureBeginY:38.515, captureEndX:69.392, captureEndY:38.515, vectorEndX:71.294, vectorEndY:38.515 2025-08-31 07:35:17.538 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:17.540 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8870432204519,EndPoint:-69.3918290682848 2025-08-31 07:35:17.955 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:17.958 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_46_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:22.366 [Thd =33] Info Default Stripes are collected for data processing！strip_no:47 2025-08-31 07:35:22.366 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:22.366 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:22.367 [Thd =34] Info Default Stripes are collected for data processing！strip_no:47 2025-08-31 07:35:22.367 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:22.367 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:B_SourceLightType 2025-08-31 07:35:22.367 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:A_SourceLightType 2025-08-31 07:35:22.367 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,B_SourceLightType 2025-08-31 07:35:22.367 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,A_SourceLightType 2025-08-31 07:35:22.536 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;47/265, 2025-08-31 07:35:22.545 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:22.625 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:22 2025-08-31 07:35:22.641 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:22.651 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:22 2025-08-31 07:35:22.848 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:22.850 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_47_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:22.977 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 48 2025-08-31 07:35:22.977 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 48 2025-08-31 07:35:22.977 [Thd =311] Info Default 开始扫描条带； [48/265] 2025-08-31 07:35:22.986 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:35:22.989 [Thd =202] Info Default CaptureBeginX: 69.72924, CaptureBeginY:38.08650, CaptureEndX:-69.54963, CaptureEndY:38.08650, VectorBeginX:71.29413, VectorBeginY:38.08650, VectorEndX:-71.50612, VectorEndY:38.08650, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:35:22.989 [Thd =202] Info Default ***row:48, vectorBeginX:71.294, vectorBeginY:38.086, captureBeginX:69.729, captureBeginY:38.086, captureEndX:-69.550, captureEndY:38.086, vectorEndX:-71.506, vectorEndY:38.086 2025-08-31 07:35:22.989 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:22.991 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7292397763308,EndPoint:69.5496325124059 2025-08-31 07:35:23.363 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:23.365 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_47_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:27.808 [Thd =34] Info Default Stripes are collected for data processing！strip_no:48 2025-08-31 07:35:27.809 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:27.809 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:27.809 [Thd =33] Info Default Stripes are collected for data processing！strip_no:48 2025-08-31 07:35:27.809 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:27.809 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:A_SourceLightType 2025-08-31 07:35:27.809 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:B_SourceLightType 2025-08-31 07:35:27.809 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,A_SourceLightType 2025-08-31 07:35:27.809 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,B_SourceLightType 2025-08-31 07:35:27.986 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;48/265, 2025-08-31 07:35:27.996 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:28.045 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:28.172 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:28 2025-08-31 07:35:28.196 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:28 2025-08-31 07:35:28.305 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:28.308 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_48_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:28.380 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 49 2025-08-31 07:35:28.380 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 49 2025-08-31 07:35:28.380 [Thd =209] Info Default 开始扫描条带； [49/265] 2025-08-31 07:35:28.389 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:35:28.392 [Thd =202] Info Default ***row:49, vectorBeginX:-71.506, vectorBeginY:37.658, captureBeginX:-69.887, captureBeginY:37.658, captureEndX:69.392, captureEndY:37.658, vectorEndX:71.294, vectorEndY:37.658 2025-08-31 07:35:28.392 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:28.394 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8870448684011,EndPoint:-69.3918274203355 2025-08-31 07:35:28.812 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:28.815 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_48_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:33.216 [Thd =33] Info Default Stripes are collected for data processing！strip_no:49 2025-08-31 07:35:33.217 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:33.217 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:33.217 [Thd =34] Info Default Stripes are collected for data processing！strip_no:49 2025-08-31 07:35:33.217 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:33.217 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:B_SourceLightType 2025-08-31 07:35:33.217 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:A_SourceLightType 2025-08-31 07:35:33.217 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,B_SourceLightType 2025-08-31 07:35:33.217 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,A_SourceLightType 2025-08-31 07:35:33.390 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;49/265, 2025-08-31 07:35:33.399 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:33.450 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:33.699 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:33.701 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_49_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:33.801 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 50 2025-08-31 07:35:33.801 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 50 2025-08-31 07:35:33.801 [Thd =302] Info Default 开始扫描条带； [50/265] 2025-08-31 07:35:33.810 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:35:33.813 [Thd =202] Info Default CaptureBeginX: 69.72924, CaptureBeginY:37.22988, CaptureEndX:-69.54963, CaptureEndY:37.22988, VectorBeginX:71.29413, VectorBeginY:37.22988, VectorEndX:-71.50612, VectorEndY:37.22988, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:35:33.813 [Thd =202] Info Default ***row:50, vectorBeginX:71.294, vectorBeginY:37.230, captureBeginX:69.729, captureBeginY:37.230, captureEndX:-69.550, captureEndY:37.230, vectorEndX:-71.506, vectorEndY:37.230 2025-08-31 07:35:33.813 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:33.814 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7292439267214,EndPoint:69.5496283620152 2025-08-31 07:35:34.227 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:34.229 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_49_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:34.236 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:34 2025-08-31 07:35:34.257 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:34 2025-08-31 07:35:38.632 [Thd =34] Info Default Stripes are collected for data processing！strip_no:50 2025-08-31 07:35:38.633 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:38.633 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:38.633 [Thd =33] Info Default Stripes are collected for data processing！strip_no:50 2025-08-31 07:35:38.634 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:38.634 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:A_SourceLightType 2025-08-31 07:35:38.634 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:B_SourceLightType 2025-08-31 07:35:38.634 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,A_SourceLightType 2025-08-31 07:35:38.634 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,B_SourceLightType 2025-08-31 07:35:38.783 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:38 2025-08-31 07:35:38.794 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:38 2025-08-31 07:35:38.812 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;50/265, 2025-08-31 07:35:38.822 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:38.866 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:39.121 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:39.124 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_50_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:39.204 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 51 2025-08-31 07:35:39.204 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 51 2025-08-31 07:35:39.204 [Thd =193] Info Default 开始扫描条带； [51/265] 2025-08-31 07:35:39.221 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:35:39.224 [Thd =202] Info Default ***row:51, vectorBeginX:-71.506, vectorBeginY:36.802, captureBeginX:-69.887, captureBeginY:36.802, captureEndX:69.392, captureEndY:36.802, vectorEndX:71.294, vectorEndY:36.802 2025-08-31 07:35:39.224 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:39.226 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8870379714284,EndPoint:-69.3918343173082 2025-08-31 07:35:39.645 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:39.648 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_50_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:44.048 [Thd =34] Info Default Stripes are collected for data processing！strip_no:51 2025-08-31 07:35:44.049 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:44.049 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:44.049 [Thd =33] Info Default Stripes are collected for data processing！strip_no:51 2025-08-31 07:35:44.049 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:44.049 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:A_SourceLightType 2025-08-31 07:35:44.049 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:B_SourceLightType 2025-08-31 07:35:44.049 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,A_SourceLightType 2025-08-31 07:35:44.050 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,B_SourceLightType 2025-08-31 07:35:44.220 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;51/265, 2025-08-31 07:35:44.229 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:44.275 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:44.318 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:44 2025-08-31 07:35:44.330 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:44 2025-08-31 07:35:44.555 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:44.558 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_51_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:44.612 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 52 2025-08-31 07:35:44.612 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 52 2025-08-31 07:35:44.612 [Thd =300] Info Default 开始扫描条带； [52/265] 2025-08-31 07:35:44.621 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:35:44.624 [Thd =202] Info Default CaptureBeginX: 69.72925, CaptureBeginY:36.37326, CaptureEndX:-69.54962, CaptureEndY:36.37326, VectorBeginX:71.29414, VectorBeginY:36.37326, VectorEndX:-71.50611, VectorEndY:36.37326, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:35:44.624 [Thd =202] Info Default ***row:52, vectorBeginX:71.294, vectorBeginY:36.373, captureBeginX:69.729, captureBeginY:36.373, captureEndX:-69.550, captureEndY:36.373, vectorEndX:-71.506, vectorEndY:36.373 2025-08-31 07:35:44.624 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:44.625 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7292541195925,EndPoint:69.5496181691441 2025-08-31 07:35:45.068 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:45.070 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_51_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:49.464 [Thd =34] Info Default Stripes are collected for data processing！strip_no:52 2025-08-31 07:35:49.464 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:49.464 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:49.465 [Thd =33] Info Default Stripes are collected for data processing！strip_no:52 2025-08-31 07:35:49.466 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:49.466 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:A_SourceLightType 2025-08-31 07:35:49.466 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,A_SourceLightType 2025-08-31 07:35:49.466 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,B_SourceLightType 2025-08-31 07:35:49.466 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:B_SourceLightType 2025-08-31 07:35:49.633 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;52/265, 2025-08-31 07:35:49.642 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:49.690 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:49.856 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:49 2025-08-31 07:35:49.889 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:49 2025-08-31 07:35:49.947 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:49.950 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_52_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:50.044 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 53 2025-08-31 07:35:50.044 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 53 2025-08-31 07:35:50.044 [Thd =302] Info Default 开始扫描条带； [53/265] 2025-08-31 07:35:50.054 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:35:50.055 [Thd =202] Info Default ***row:53, vectorBeginX:-71.506, vectorBeginY:35.945, captureBeginX:-69.887, captureBeginY:35.945, captureEndX:69.392, captureEndY:35.945, vectorEndX:71.294, vectorEndY:35.945 2025-08-31 07:35:50.056 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:50.058 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8870245436941,EndPoint:-69.3918477450426 2025-08-31 07:35:50.453 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:50.456 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_52_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:54.878 [Thd =34] Info Default Stripes are collected for data processing！strip_no:53 2025-08-31 07:35:54.878 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:54.878 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:35:54.879 [Thd =33] Info Default Stripes are collected for data processing！strip_no:53 2025-08-31 07:35:54.879 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:35:54.879 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:A_SourceLightType 2025-08-31 07:35:54.879 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:B_SourceLightType 2025-08-31 07:35:54.879 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,A_SourceLightType 2025-08-31 07:35:54.879 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,B_SourceLightType 2025-08-31 07:35:55.066 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;53/265, 2025-08-31 07:35:55.075 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:35:55.165 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:35:55.377 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:35:55.380 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_53_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:35:55.428 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:35:55 2025-08-31 07:35:55.440 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:35:55 2025-08-31 07:35:55.502 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 54 2025-08-31 07:35:55.502 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 54 2025-08-31 07:35:55.502 [Thd =299] Info Default 开始扫描条带； [54/265] 2025-08-31 07:35:55.511 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:35:55.514 [Thd =202] Info Default CaptureBeginX: 69.72927, CaptureBeginY:35.51664, CaptureEndX:-69.54960, CaptureEndY:35.51664, VectorBeginX:71.29416, VectorBeginY:35.51664, VectorEndX:-71.50609, VectorEndY:35.51664, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:35:55.514 [Thd =202] Info Default ***row:54, vectorBeginX:71.294, vectorBeginY:35.517, captureBeginX:69.729, captureBeginY:35.517, captureEndX:-69.550, captureEndY:35.517, vectorEndX:-71.506, vectorEndY:35.517 2025-08-31 07:35:55.514 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:35:55.515 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7292713315066,EndPoint:69.5496009572301 2025-08-31 07:35:55.879 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:35:55.881 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_53_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:00.348 [Thd =33] Info Default Stripes are collected for data processing！strip_no:54 2025-08-31 07:36:00.348 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:00.348 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:00.350 [Thd =34] Info Default Stripes are collected for data processing！strip_no:54 2025-08-31 07:36:00.350 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:00.350 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:B_SourceLightType 2025-08-31 07:36:00.350 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:A_SourceLightType 2025-08-31 07:36:00.350 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,B_SourceLightType 2025-08-31 07:36:00.351 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,A_SourceLightType 2025-08-31 07:36:00.457 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:00 2025-08-31 07:36:00.488 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:00 2025-08-31 07:36:00.504 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;54/265, 2025-08-31 07:36:00.513 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:00.560 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:00.835 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:00.838 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_54_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:00.902 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 55 2025-08-31 07:36:00.902 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 55 2025-08-31 07:36:00.902 [Thd =262] Info Default 开始扫描条带； [55/265] 2025-08-31 07:36:00.910 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:36:00.913 [Thd =202] Info Default ***row:55, vectorBeginX:-71.506, vectorBeginY:35.088, captureBeginX:-69.887, captureBeginY:35.088, captureEndX:69.392, captureEndY:35.088, vectorEndX:71.294, vectorEndY:35.088 2025-08-31 07:36:00.913 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:00.914 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8870027541433,EndPoint:-69.3918695345934 2025-08-31 07:36:01.340 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:01.342 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_54_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:05.735 [Thd =33] Info Default Stripes are collected for data processing！strip_no:55 2025-08-31 07:36:05.735 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:05.735 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:05.738 [Thd =34] Info Default Stripes are collected for data processing！strip_no:55 2025-08-31 07:36:05.738 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:05.738 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:B_SourceLightType 2025-08-31 07:36:05.738 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:A_SourceLightType 2025-08-31 07:36:05.738 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,B_SourceLightType 2025-08-31 07:36:05.738 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,A_SourceLightType 2025-08-31 07:36:05.903 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;55/265, 2025-08-31 07:36:05.912 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:05.963 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:06.021 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:06 2025-08-31 07:36:06.030 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:06 2025-08-31 07:36:06.256 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:06.259 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_55_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:06.298 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 56 2025-08-31 07:36:06.298 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 56 2025-08-31 07:36:06.298 [Thd =209] Info Default 开始扫描条带； [56/265] 2025-08-31 07:36:06.307 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:36:06.310 [Thd =202] Info Default CaptureBeginX: 69.72928, CaptureBeginY:34.66001, CaptureEndX:-69.54960, CaptureEndY:34.66001, VectorBeginX:71.29416, VectorBeginY:34.66001, VectorEndX:-71.50609, VectorEndY:34.66001, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:36:06.310 [Thd =202] Info Default ***row:56, vectorBeginX:71.294, vectorBeginY:34.660, captureBeginX:69.729, captureBeginY:34.660, captureEndX:-69.550, captureEndY:34.660, vectorEndX:-71.506, vectorEndY:34.660 2025-08-31 07:36:06.310 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:06.311 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7292753598269,EndPoint:69.5495969289098 2025-08-31 07:36:06.772 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:06.775 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_55_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:11.128 [Thd =34] Info Default Stripes are collected for data processing！strip_no:56 2025-08-31 07:36:11.129 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:11.129 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:11.129 [Thd =33] Info Default Stripes are collected for data processing！strip_no:56 2025-08-31 07:36:11.129 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:11.129 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:A_SourceLightType 2025-08-31 07:36:11.130 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:B_SourceLightType 2025-08-31 07:36:11.130 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,A_SourceLightType 2025-08-31 07:36:11.130 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,B_SourceLightType 2025-08-31 07:36:11.313 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;56/265, 2025-08-31 07:36:11.322 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:11.412 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:11.624 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:11.626 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_56_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:11.751 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 57 2025-08-31 07:36:11.751 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 57 2025-08-31 07:36:11.751 [Thd =332] Info Default 开始扫描条带； [57/265] 2025-08-31 07:36:11.759 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:36:11.762 [Thd =202] Info Default ***row:57, vectorBeginX:-71.506, vectorBeginY:34.232, captureBeginX:-69.887, captureBeginY:34.232, captureEndX:69.392, captureEndY:34.232, vectorEndX:71.294, vectorEndY:34.232 2025-08-31 07:36:11.762 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:11.764 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8869904860769,EndPoint:-69.3918818026598 2025-08-31 07:36:12.056 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:12 2025-08-31 07:36:12.074 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:12 2025-08-31 07:36:12.127 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:12.129 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_56_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:16.586 [Thd =34] Info Default Stripes are collected for data processing！strip_no:57 2025-08-31 07:36:16.586 [Thd =33] Info Default Stripes are collected for data processing！strip_no:57 2025-08-31 07:36:16.587 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:16.587 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:16.587 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:16.587 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:B_SourceLightType 2025-08-31 07:36:16.587 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:A_SourceLightType 2025-08-31 07:36:16.587 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,B_SourceLightType 2025-08-31 07:36:16.587 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,A_SourceLightType 2025-08-31 07:36:16.754 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;57/265, 2025-08-31 07:36:16.763 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:16.841 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:17.082 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:17.084 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_57_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:17.197 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 58 2025-08-31 07:36:17.197 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 58 2025-08-31 07:36:17.197 [Thd =332] Info Default 开始扫描条带； [58/265] 2025-08-31 07:36:17.206 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:36:17.209 [Thd =202] Info Default CaptureBeginX: 69.72933, CaptureBeginY:33.80339, CaptureEndX:-69.54954, CaptureEndY:33.80339, VectorBeginX:71.29422, VectorBeginY:33.80339, VectorEndX:-71.50603, VectorEndY:33.80339, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:36:17.209 [Thd =202] Info Default ***row:58, vectorBeginX:71.294, vectorBeginY:33.803, captureBeginX:69.729, captureBeginY:33.803, captureEndX:-69.550, captureEndY:33.803, vectorEndX:-71.506, vectorEndY:33.803 2025-08-31 07:36:17.209 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:17.210 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7293316342409,EndPoint:69.5495406544957 2025-08-31 07:36:17.594 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:17.596 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_57_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:17.618 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:17 2025-08-31 07:36:17.639 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:17 2025-08-31 07:36:22.032 [Thd =34] Info Default Stripes are collected for data processing！strip_no:58 2025-08-31 07:36:22.032 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:22.032 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:22.033 [Thd =33] Info Default Stripes are collected for data processing！strip_no:58 2025-08-31 07:36:22.033 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:22.033 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:A_SourceLightType 2025-08-31 07:36:22.033 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:B_SourceLightType 2025-08-31 07:36:22.033 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,A_SourceLightType 2025-08-31 07:36:22.033 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,B_SourceLightType 2025-08-31 07:36:22.155 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:22 2025-08-31 07:36:22.165 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:22 2025-08-31 07:36:22.211 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;58/265, 2025-08-31 07:36:22.220 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:22.300 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:22.516 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:22.518 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_58_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:22.639 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 59 2025-08-31 07:36:22.639 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 59 2025-08-31 07:36:22.639 [Thd =273] Info Default 开始扫描条带； [59/265] 2025-08-31 07:36:22.648 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:36:22.651 [Thd =202] Info Default ***row:59, vectorBeginX:-71.506, vectorBeginY:33.375, captureBeginX:-69.887, captureBeginY:33.375, captureEndX:69.392, captureEndY:33.375, vectorEndX:71.294, vectorEndY:33.375 2025-08-31 07:36:22.651 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:22.653 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8869556350026,EndPoint:-69.391916653734 2025-08-31 07:36:23.020 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:23.022 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_58_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:27.473 [Thd =34] Info Default Stripes are collected for data processing！strip_no:59 2025-08-31 07:36:27.473 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:27.473 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:27.473 [Thd =33] Info Default Stripes are collected for data processing！strip_no:59 2025-08-31 07:36:27.473 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:27.474 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:A_SourceLightType 2025-08-31 07:36:27.474 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:B_SourceLightType 2025-08-31 07:36:27.474 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,A_SourceLightType 2025-08-31 07:36:27.474 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,B_SourceLightType 2025-08-31 07:36:27.648 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;59/265, 2025-08-31 07:36:27.657 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:27.699 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:27 2025-08-31 07:36:27.756 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:27.767 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:27 2025-08-31 07:36:27.954 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:27.957 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_59_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:28.097 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 60 2025-08-31 07:36:28.097 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 60 2025-08-31 07:36:28.097 [Thd =340] Info Default 开始扫描条带； [60/265] 2025-08-31 07:36:28.106 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:36:28.109 [Thd =202] Info Default CaptureBeginX: 69.72936, CaptureBeginY:32.94677, CaptureEndX:-69.54951, CaptureEndY:32.94677, VectorBeginX:71.29425, VectorBeginY:32.94677, VectorEndX:-71.50600, VectorEndY:32.94677, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:36:28.109 [Thd =202] Info Default ***row:60, vectorBeginX:71.294, vectorBeginY:32.947, captureBeginX:69.729, captureBeginY:32.947, captureEndX:-69.550, captureEndY:32.947, vectorEndX:-71.506, vectorEndY:32.947 2025-08-31 07:36:28.109 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:28.111 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7293630063112,EndPoint:69.5495092824254 2025-08-31 07:36:28.452 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:28.455 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_59_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:32.929 [Thd =34] Info Default Stripes are collected for data processing！strip_no:60 2025-08-31 07:36:32.929 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:32.929 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:32.929 [Thd =33] Info Default Stripes are collected for data processing！strip_no:60 2025-08-31 07:36:32.930 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:32.930 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:A_SourceLightType 2025-08-31 07:36:32.930 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:B_SourceLightType 2025-08-31 07:36:32.930 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,A_SourceLightType 2025-08-31 07:36:32.930 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,B_SourceLightType 2025-08-31 07:36:33.107 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;60/265, 2025-08-31 07:36:33.116 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:33.206 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:33.291 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:33 2025-08-31 07:36:33.306 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:33 2025-08-31 07:36:33.426 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:33.429 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_60_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:33.556 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 61 2025-08-31 07:36:33.556 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 61 2025-08-31 07:36:33.556 [Thd =340] Info Default 开始扫描条带； [61/265] 2025-08-31 07:36:33.565 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:36:33.568 [Thd =202] Info Default ***row:61, vectorBeginX:-71.506, vectorBeginY:32.518, captureBeginX:-69.887, captureBeginY:32.518, captureEndX:69.392, captureEndY:32.518, vectorEndX:71.294, vectorEndY:32.518 2025-08-31 07:36:33.568 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:33.569 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.886908882073,EndPoint:-69.3919634066637 2025-08-31 07:36:33.920 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:33.923 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_60_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:38.402 [Thd =34] Info Default Stripes are collected for data processing！strip_no:61 2025-08-31 07:36:38.402 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:38.402 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:38.403 [Thd =33] Info Default Stripes are collected for data processing！strip_no:61 2025-08-31 07:36:38.403 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:38.403 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:A_SourceLightType 2025-08-31 07:36:38.403 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:B_SourceLightType 2025-08-31 07:36:38.403 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,A_SourceLightType 2025-08-31 07:36:38.403 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,B_SourceLightType 2025-08-31 07:36:38.559 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;61/265, 2025-08-31 07:36:38.568 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:38.663 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:38.887 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:38.890 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_61_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:38.999 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 62 2025-08-31 07:36:38.999 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 62 2025-08-31 07:36:38.999 [Thd =311] Info Default 开始扫描条带； [62/265] 2025-08-31 07:36:39.009 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:36:39.011 [Thd =202] Info Default CaptureBeginX: 69.72939, CaptureBeginY:32.09016, CaptureEndX:-69.54948, CaptureEndY:32.09016, VectorBeginX:71.29428, VectorBeginY:32.09016, VectorEndX:-71.50597, VectorEndY:32.09016, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:36:39.011 [Thd =202] Info Default ***row:62, vectorBeginX:71.294, vectorBeginY:32.090, captureBeginX:69.729, captureBeginY:32.090, captureEndX:-69.549, captureEndY:32.090, vectorEndX:-71.506, vectorEndY:32.090 2025-08-31 07:36:39.012 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:39.014 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.729392608362,EndPoint:69.5494796803746 2025-08-31 07:36:39.327 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:39 2025-08-31 07:36:39.348 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:39 2025-08-31 07:36:39.402 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:39.404 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_61_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:43.833 [Thd =34] Info Default Stripes are collected for data processing！strip_no:62 2025-08-31 07:36:43.833 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:43.833 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:43.833 [Thd =33] Info Default Stripes are collected for data processing！strip_no:62 2025-08-31 07:36:43.834 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:43.834 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:A_SourceLightType 2025-08-31 07:36:43.834 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:B_SourceLightType 2025-08-31 07:36:43.834 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,A_SourceLightType 2025-08-31 07:36:43.834 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,B_SourceLightType 2025-08-31 07:36:43.870 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:43 2025-08-31 07:36:43.883 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:43 2025-08-31 07:36:44.010 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;62/265, 2025-08-31 07:36:44.019 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:44.132 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:44.313 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:44.316 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_62_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:44.469 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 63 2025-08-31 07:36:44.469 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 63 2025-08-31 07:36:44.469 [Thd =193] Info Default 开始扫描条带； [63/265] 2025-08-31 07:36:44.478 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:36:44.481 [Thd =202] Info Default ***row:63, vectorBeginX:-71.506, vectorBeginY:31.662, captureBeginX:-69.887, captureBeginY:31.662, captureEndX:69.392, captureEndY:31.662, vectorEndX:71.294, vectorEndY:31.662 2025-08-31 07:36:44.481 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:44.483 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8868973464284,EndPoint:-69.3919749423082 2025-08-31 07:36:44.810 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:44.812 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_62_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:49.302 [Thd =34] Info Default Stripes are collected for data processing！strip_no:63 2025-08-31 07:36:49.302 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:49.303 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:49.303 [Thd =33] Info Default Stripes are collected for data processing！strip_no:63 2025-08-31 07:36:49.303 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:49.303 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:A_SourceLightType 2025-08-31 07:36:49.303 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:B_SourceLightType 2025-08-31 07:36:49.304 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,A_SourceLightType 2025-08-31 07:36:49.304 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,B_SourceLightType 2025-08-31 07:36:49.419 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:49 2025-08-31 07:36:49.432 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:49 2025-08-31 07:36:49.479 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;63/265, 2025-08-31 07:36:49.489 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:49.567 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:49.797 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:49.800 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_63_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:49.910 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 64 2025-08-31 07:36:49.910 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 64 2025-08-31 07:36:49.910 [Thd =290] Info Default 开始扫描条带； [64/265] 2025-08-31 07:36:49.933 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:36:49.936 [Thd =202] Info Default CaptureBeginX: 69.72942, CaptureBeginY:31.23354, CaptureEndX:-69.54945, CaptureEndY:31.23354, VectorBeginX:71.29431, VectorBeginY:31.23354, VectorEndX:-71.50594, VectorEndY:31.23354, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:36:49.936 [Thd =202] Info Default ***row:64, vectorBeginX:71.294, vectorBeginY:31.234, captureBeginX:69.729, captureBeginY:31.234, captureEndX:-69.549, captureEndY:31.234, vectorEndX:-71.506, vectorEndY:31.234 2025-08-31 07:36:49.936 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:49.938 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7294194638308,EndPoint:69.5494528249059 2025-08-31 07:36:50.297 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:50.300 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_63_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:54.757 [Thd =34] Info Default Stripes are collected for data processing！strip_no:64 2025-08-31 07:36:54.757 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:54.757 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:36:54.758 [Thd =33] Info Default Stripes are collected for data processing！strip_no:64 2025-08-31 07:36:54.758 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:36:54.758 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:A_SourceLightType 2025-08-31 07:36:54.758 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:B_SourceLightType 2025-08-31 07:36:54.758 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,A_SourceLightType 2025-08-31 07:36:54.758 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,B_SourceLightType 2025-08-31 07:36:54.927 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;64/265, 2025-08-31 07:36:54.937 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:36:54.954 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:36:54 2025-08-31 07:36:54.977 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:36:54.983 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:36:54 2025-08-31 07:36:55.239 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:36:55.242 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_64_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:36:55.318 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 65 2025-08-31 07:36:55.318 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 65 2025-08-31 07:36:55.318 [Thd =340] Info Default 开始扫描条带； [65/265] 2025-08-31 07:36:55.327 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:36:55.330 [Thd =202] Info Default ***row:65, vectorBeginX:-71.506, vectorBeginY:30.805, captureBeginX:-69.887, captureBeginY:30.805, captureEndX:69.392, captureEndY:30.805, vectorEndX:71.294, vectorEndY:30.805 2025-08-31 07:36:55.330 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:36:55.332 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8868560256277,EndPoint:-69.392016263109 2025-08-31 07:36:55.757 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:36:55.759 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_64_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:00.153 [Thd =34] Info Default Stripes are collected for data processing！strip_no:65 2025-08-31 07:37:00.153 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:00.153 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:00.155 [Thd =33] Info Default Stripes are collected for data processing！strip_no:65 2025-08-31 07:37:00.155 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:00.155 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:A_SourceLightType 2025-08-31 07:37:00.155 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:B_SourceLightType 2025-08-31 07:37:00.155 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,A_SourceLightType 2025-08-31 07:37:00.156 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,B_SourceLightType 2025-08-31 07:37:00.324 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;65/265, 2025-08-31 07:37:00.333 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:00.398 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:00.524 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:00 2025-08-31 07:37:00.551 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:00 2025-08-31 07:37:00.653 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:00.656 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_65_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:00.735 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 66 2025-08-31 07:37:00.735 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 66 2025-08-31 07:37:00.735 [Thd =340] Info Default 开始扫描条带； [66/265] 2025-08-31 07:37:00.744 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:37:00.747 [Thd =202] Info Default CaptureBeginX: 69.72943, CaptureBeginY:30.37691, CaptureEndX:-69.54944, CaptureEndY:30.37691, VectorBeginX:71.29432, VectorBeginY:30.37691, VectorEndX:-71.50593, VectorEndY:30.37691, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:37:00.747 [Thd =202] Info Default ***row:66, vectorBeginX:71.294, vectorBeginY:30.377, captureBeginX:69.729, captureBeginY:30.377, captureEndX:-69.549, captureEndY:30.377, vectorEndX:-71.506, vectorEndY:30.377 2025-08-31 07:37:00.748 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:00.749 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7294298398073,EndPoint:69.5494424489293 2025-08-31 07:37:01.181 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:01.184 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_65_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:05.569 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:05 2025-08-31 07:37:05.582 [Thd =33] Info Default Stripes are collected for data processing！strip_no:66 2025-08-31 07:37:05.583 [Thd =34] Info Default Stripes are collected for data processing！strip_no:66 2025-08-31 07:37:05.583 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:05.583 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:05.583 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:05.583 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:A_SourceLightType 2025-08-31 07:37:05.583 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:B_SourceLightType 2025-08-31 07:37:05.583 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,A_SourceLightType 2025-08-31 07:37:05.583 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,B_SourceLightType 2025-08-31 07:37:05.589 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:05 2025-08-31 07:37:05.745 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;66/265, 2025-08-31 07:37:05.754 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:05.795 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:06.069 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:06.071 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_66_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:06.145 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 67 2025-08-31 07:37:06.145 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 67 2025-08-31 07:37:06.145 [Thd =273] Info Default 开始扫描条带； [67/265] 2025-08-31 07:37:06.176 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:37:06.179 [Thd =202] Info Default ***row:67, vectorBeginX:-71.506, vectorBeginY:29.949, captureBeginX:-69.887, captureBeginY:29.949, captureEndX:69.392, captureEndY:29.949, vectorEndX:71.294, vectorEndY:29.949 2025-08-31 07:37:06.180 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:06.181 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8868512648855,EndPoint:-69.3920210238512 2025-08-31 07:37:06.573 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:06.576 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_66_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:11.006 [Thd =34] Info Default Stripes are collected for data processing！strip_no:67 2025-08-31 07:37:11.006 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:11.006 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:11.007 [Thd =33] Info Default Stripes are collected for data processing！strip_no:67 2025-08-31 07:37:11.007 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:11.007 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:A_SourceLightType 2025-08-31 07:37:11.007 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:B_SourceLightType 2025-08-31 07:37:11.007 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,A_SourceLightType 2025-08-31 07:37:11.007 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,B_SourceLightType 2025-08-31 07:37:11.110 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:11 2025-08-31 07:37:11.121 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:11 2025-08-31 07:37:11.178 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;67/265, 2025-08-31 07:37:11.198 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:11.231 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:11.511 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:11.513 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_67_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:11.568 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 68 2025-08-31 07:37:11.568 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 68 2025-08-31 07:37:11.568 [Thd =338] Info Default 开始扫描条带； [68/265] 2025-08-31 07:37:11.577 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:37:11.580 [Thd =202] Info Default CaptureBeginX: 69.72946, CaptureBeginY:29.52029, CaptureEndX:-69.54942, CaptureEndY:29.52029, VectorBeginX:71.29434, VectorBeginY:29.52029, VectorEndX:-71.50591, VectorEndY:29.52029, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:37:11.580 [Thd =202] Info Default ***row:68, vectorBeginX:71.294, vectorBeginY:29.520, captureBeginX:69.729, captureBeginY:29.520, captureEndX:-69.549, captureEndY:29.520, vectorEndX:-71.506, vectorEndY:29.520 2025-08-31 07:37:11.581 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:11.582 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.729455108362,EndPoint:69.5494171803746 2025-08-31 07:37:12.023 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:12.025 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_67_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:16.404 [Thd =34] Info Default Stripes are collected for data processing！strip_no:68 2025-08-31 07:37:16.404 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:16.404 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:16.405 [Thd =33] Info Default Stripes are collected for data processing！strip_no:68 2025-08-31 07:37:16.405 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:16.405 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:A_SourceLightType 2025-08-31 07:37:16.405 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:B_SourceLightType 2025-08-31 07:37:16.405 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,A_SourceLightType 2025-08-31 07:37:16.405 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,B_SourceLightType 2025-08-31 07:37:16.595 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;68/265, 2025-08-31 07:37:16.605 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:16.642 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:16 2025-08-31 07:37:16.687 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:16.698 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:16 2025-08-31 07:37:16.901 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:16.904 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_68_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:17.034 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 69 2025-08-31 07:37:17.034 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 69 2025-08-31 07:37:17.034 [Thd =311] Info Default 开始扫描条带； [69/265] 2025-08-31 07:37:17.043 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:37:17.046 [Thd =202] Info Default ***row:69, vectorBeginX:-71.506, vectorBeginY:29.092, captureBeginX:-69.887, captureBeginY:29.092, captureEndX:69.392, captureEndY:29.092, vectorEndX:71.294, vectorEndY:29.092 2025-08-31 07:37:17.046 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:17.048 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8868265456472,EndPoint:-69.3920457430895 2025-08-31 07:37:17.421 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:17.423 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_68_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:21.868 [Thd =34] Info Default Stripes are collected for data processing！strip_no:69 2025-08-31 07:37:21.868 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:21.868 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:21.868 [Thd =33] Info Default Stripes are collected for data processing！strip_no:69 2025-08-31 07:37:21.869 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:21.869 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:A_SourceLightType 2025-08-31 07:37:21.869 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:B_SourceLightType 2025-08-31 07:37:21.869 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,A_SourceLightType 2025-08-31 07:37:21.869 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,B_SourceLightType 2025-08-31 07:37:22.045 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;69/265, 2025-08-31 07:37:22.054 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:22.099 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:22.222 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:22 2025-08-31 07:37:22.242 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:22 2025-08-31 07:37:22.356 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:22.358 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_69_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:22.436 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 70 2025-08-31 07:37:22.436 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 70 2025-08-31 07:37:22.436 [Thd =193] Info Default 开始扫描条带； [70/265] 2025-08-31 07:37:22.446 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:37:22.449 [Thd =202] Info Default CaptureBeginX: 69.72949, CaptureBeginY:28.66368, CaptureEndX:-69.54938, CaptureEndY:28.66368, VectorBeginX:71.29438, VectorBeginY:28.66368, VectorEndX:-71.50587, VectorEndY:28.66368, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:37:22.449 [Thd =202] Info Default ***row:70, vectorBeginX:71.294, vectorBeginY:28.664, captureBeginX:69.729, captureBeginY:28.664, captureEndX:-69.549, captureEndY:28.664, vectorEndX:-71.506, vectorEndY:28.664 2025-08-31 07:37:22.449 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:22.452 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7294915463503,EndPoint:69.5493807423863 2025-08-31 07:37:22.876 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:22.879 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_69_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:27.275 [Thd =33] Info Default Stripes are collected for data processing！strip_no:70 2025-08-31 07:37:27.275 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:27.275 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:27.277 [Thd =34] Info Default Stripes are collected for data processing！strip_no:70 2025-08-31 07:37:27.277 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:27.277 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:B_SourceLightType 2025-08-31 07:37:27.277 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:A_SourceLightType 2025-08-31 07:37:27.277 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,B_SourceLightType 2025-08-31 07:37:27.277 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,A_SourceLightType 2025-08-31 07:37:27.283 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:27 2025-08-31 07:37:27.303 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:27 2025-08-31 07:37:27.444 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;70/265, 2025-08-31 07:37:27.453 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:27.489 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:27.758 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:27.760 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_70_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:27.831 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 71 2025-08-31 07:37:27.831 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 71 2025-08-31 07:37:27.831 [Thd =320] Info Default 开始扫描条带； [71/265] 2025-08-31 07:37:27.840 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:37:27.843 [Thd =202] Info Default ***row:71, vectorBeginX:-71.506, vectorBeginY:28.235, captureBeginX:-69.887, captureBeginY:28.235, captureEndX:69.392, captureEndY:28.235, vectorEndX:71.294, vectorEndY:28.235 2025-08-31 07:37:27.843 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:27.846 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8867686232839,EndPoint:-69.3921036654527 2025-08-31 07:37:28.277 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:28.279 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_70_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:32.673 [Thd =33] Info Default Stripes are collected for data processing！strip_no:71 2025-08-31 07:37:32.673 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:32.673 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:32.673 [Thd =34] Info Default Stripes are collected for data processing！strip_no:71 2025-08-31 07:37:32.673 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:32.674 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:B_SourceLightType 2025-08-31 07:37:32.674 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:A_SourceLightType 2025-08-31 07:37:32.674 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,B_SourceLightType 2025-08-31 07:37:32.674 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,A_SourceLightType 2025-08-31 07:37:32.827 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:32 2025-08-31 07:37:32.838 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;71/265, 2025-08-31 07:37:32.841 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:32 2025-08-31 07:37:32.847 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:32.925 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:33.170 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:33.172 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_71_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:33.266 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 72 2025-08-31 07:37:33.266 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 72 2025-08-31 07:37:33.266 [Thd =193] Info Default 开始扫描条带； [72/265] 2025-08-31 07:37:33.275 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:37:33.278 [Thd =202] Info Default CaptureBeginX: 69.72956, CaptureBeginY:27.80705, CaptureEndX:-69.54931, CaptureEndY:27.80705, VectorBeginX:71.29445, VectorBeginY:27.80705, VectorEndX:-71.50580, VectorEndY:27.80705, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:37:33.278 [Thd =202] Info Default ***row:72, vectorBeginX:71.294, vectorBeginY:27.807, captureBeginX:69.730, captureBeginY:27.807, captureEndX:-69.549, captureEndY:27.807, vectorEndX:-71.506, vectorEndY:27.807 2025-08-31 07:37:33.278 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:33.280 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7295615536745,EndPoint:69.5493107350621 2025-08-31 07:37:33.675 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:33.691 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_71_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:37.867 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:37 2025-08-31 07:37:37.889 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:37 2025-08-31 07:37:38.098 [Thd =34] Info Default Stripes are collected for data processing！strip_no:72 2025-08-31 07:37:38.098 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:38.098 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:38.099 [Thd =33] Info Default Stripes are collected for data processing！strip_no:72 2025-08-31 07:37:38.099 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:38.099 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:A_SourceLightType 2025-08-31 07:37:38.099 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:B_SourceLightType 2025-08-31 07:37:38.099 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,A_SourceLightType 2025-08-31 07:37:38.099 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,B_SourceLightType 2025-08-31 07:37:38.276 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;72/265, 2025-08-31 07:37:38.285 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:38.326 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:38.591 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:38.594 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_72_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:38.674 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 73 2025-08-31 07:37:38.674 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 73 2025-08-31 07:37:38.674 [Thd =320] Info Default 开始扫描条带； [73/265] 2025-08-31 07:37:38.683 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:37:38.686 [Thd =202] Info Default ***row:73, vectorBeginX:-71.506, vectorBeginY:27.379, captureBeginX:-69.887, captureBeginY:27.379, captureEndX:69.392, captureEndY:27.379, vectorEndX:71.294, vectorEndY:27.379 2025-08-31 07:37:38.686 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:38.689 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8867287673269,EndPoint:-69.3921435214098 2025-08-31 07:37:39.099 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:39.101 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_72_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:43.507 [Thd =34] Info Default Stripes are collected for data processing！strip_no:73 2025-08-31 07:37:43.508 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:43.508 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:43.508 [Thd =33] Info Default Stripes are collected for data processing！strip_no:73 2025-08-31 07:37:43.509 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:43.509 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:A_SourceLightType 2025-08-31 07:37:43.509 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:B_SourceLightType 2025-08-31 07:37:43.509 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,A_SourceLightType 2025-08-31 07:37:43.509 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,B_SourceLightType 2025-08-31 07:37:43.686 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;73/265, 2025-08-31 07:37:43.703 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:43.748 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:44.009 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:44.012 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_73_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:44.087 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 74 2025-08-31 07:37:44.087 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 74 2025-08-31 07:37:44.087 [Thd =262] Info Default 开始扫描条带； [74/265] 2025-08-31 07:37:44.110 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:37:44.113 [Thd =202] Info Default CaptureBeginX: 69.72959, CaptureBeginY:26.95044, CaptureEndX:-69.54928, CaptureEndY:26.95044, VectorBeginX:71.29448, VectorBeginY:26.95044, VectorEndX:-71.50577, VectorEndY:26.95044, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:37:44.113 [Thd =202] Info Default ***row:74, vectorBeginX:71.294, vectorBeginY:26.950, captureBeginX:69.730, captureBeginY:26.950, captureEndX:-69.549, captureEndY:26.950, vectorEndX:-71.506, vectorEndY:26.950 2025-08-31 07:37:44.113 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:44.115 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7295895688112,EndPoint:69.5492827199254 2025-08-31 07:37:44.423 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:44 2025-08-31 07:37:44.435 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:44 2025-08-31 07:37:44.514 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:44.516 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_73_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:48.932 [Thd =34] Info Default Stripes are collected for data processing！strip_no:74 2025-08-31 07:37:48.932 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:48.932 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:48.932 [Thd =33] Info Default Stripes are collected for data processing！strip_no:74 2025-08-31 07:37:48.932 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:48.932 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:A_SourceLightType 2025-08-31 07:37:48.933 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:B_SourceLightType 2025-08-31 07:37:48.933 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,A_SourceLightType 2025-08-31 07:37:48.933 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,B_SourceLightType 2025-08-31 07:37:48.975 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:48 2025-08-31 07:37:49.004 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:49 2025-08-31 07:37:49.110 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;74/265, 2025-08-31 07:37:49.120 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:49.233 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:49.416 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:49.419 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_74_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:49.579 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 75 2025-08-31 07:37:49.579 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 75 2025-08-31 07:37:49.579 [Thd =338] Info Default 开始扫描条带； [75/265] 2025-08-31 07:37:49.588 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:37:49.591 [Thd =202] Info Default ***row:75, vectorBeginX:-71.506, vectorBeginY:26.522, captureBeginX:-69.887, captureBeginY:26.522, captureEndX:69.392, captureEndY:26.522, vectorEndX:71.295, vectorEndY:26.522 2025-08-31 07:37:49.591 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:49.592 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8866734694753,EndPoint:-69.3921988192613 2025-08-31 07:37:49.927 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:49.930 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_74_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:54.412 [Thd =34] Info Default Stripes are collected for data processing！strip_no:75 2025-08-31 07:37:54.412 [Thd =33] Info Default Stripes are collected for data processing！strip_no:75 2025-08-31 07:37:54.412 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:54.412 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:54.412 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:54.413 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:B_SourceLightType 2025-08-31 07:37:54.413 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:A_SourceLightType 2025-08-31 07:37:54.413 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,B_SourceLightType 2025-08-31 07:37:54.413 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,A_SourceLightType 2025-08-31 07:37:54.543 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:37:54 2025-08-31 07:37:54.563 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:37:54 2025-08-31 07:37:54.588 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;75/265, 2025-08-31 07:37:54.597 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:37:54.642 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:37:54.891 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:37:54.894 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_75_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:54.981 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 76 2025-08-31 07:37:54.981 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 76 2025-08-31 07:37:54.981 [Thd =262] Info Default 开始扫描条带； [76/265] 2025-08-31 07:37:54.990 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:37:54.993 [Thd =202] Info Default CaptureBeginX: 69.72964, CaptureBeginY:26.09382, CaptureEndX:-69.54924, CaptureEndY:26.09382, VectorBeginX:71.29453, VectorBeginY:26.09382, VectorEndX:-71.50572, VectorEndY:26.09382, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:37:54.993 [Thd =202] Info Default ***row:76, vectorBeginX:71.295, vectorBeginY:26.094, captureBeginX:69.730, captureBeginY:26.094, captureEndX:-69.549, captureEndY:26.094, vectorEndX:-71.506, vectorEndY:26.094 2025-08-31 07:37:54.993 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:37:54.995 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7296363827761,EndPoint:69.5492359059605 2025-08-31 07:37:55.412 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:37:55.415 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_75_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:37:59.813 [Thd =34] Info Default Stripes are collected for data processing！strip_no:76 2025-08-31 07:37:59.813 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:59.813 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:37:59.813 [Thd =33] Info Default Stripes are collected for data processing！strip_no:76 2025-08-31 07:37:59.814 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:37:59.814 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:A_SourceLightType 2025-08-31 07:37:59.814 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:B_SourceLightType 2025-08-31 07:37:59.832 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,A_SourceLightType 2025-08-31 07:37:59.832 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,B_SourceLightType 2025-08-31 07:37:59.993 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;76/265, 2025-08-31 07:38:00.002 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:00.046 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:00.095 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:00 2025-08-31 07:38:00.106 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:00 2025-08-31 07:38:00.312 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:00.314 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_76_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:00.390 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 77 2025-08-31 07:38:00.390 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 77 2025-08-31 07:38:00.390 [Thd =322] Info Default 开始扫描条带； [77/265] 2025-08-31 07:38:00.401 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:38:00.404 [Thd =202] Info Default ***row:77, vectorBeginX:-71.506, vectorBeginY:25.666, captureBeginX:-69.887, captureBeginY:25.666, captureEndX:69.392, captureEndY:25.666, vectorEndX:71.295, vectorEndY:25.666 2025-08-31 07:38:00.404 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:00.407 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8866358718191,EndPoint:-69.3922364169176 2025-08-31 07:38:00.815 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:00.818 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_76_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:05.241 [Thd =34] Info Default Stripes are collected for data processing！strip_no:77 2025-08-31 07:38:05.241 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:05.241 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:05.242 [Thd =33] Info Default Stripes are collected for data processing！strip_no:77 2025-08-31 07:38:05.242 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:05.242 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:A_SourceLightType 2025-08-31 07:38:05.242 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:B_SourceLightType 2025-08-31 07:38:05.242 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,A_SourceLightType 2025-08-31 07:38:05.242 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,B_SourceLightType 2025-08-31 07:38:05.401 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;77/265, 2025-08-31 07:38:05.410 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:05.455 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:05.728 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:05.730 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_77_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:05.792 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 78 2025-08-31 07:38:05.792 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 78 2025-08-31 07:38:05.792 [Thd =273] Info Default 开始扫描条带； [78/265] 2025-08-31 07:38:05.801 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:38:05.804 [Thd =202] Info Default CaptureBeginX: 69.72967, CaptureBeginY:25.23720, CaptureEndX:-69.54920, CaptureEndY:25.23720, VectorBeginX:71.29456, VectorBeginY:25.23720, VectorEndX:-71.50569, VectorEndY:25.23720, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:38:05.804 [Thd =202] Info Default ***row:78, vectorBeginX:71.295, vectorBeginY:25.237, captureBeginX:69.730, captureBeginY:25.237, captureEndX:-69.549, captureEndY:25.237, vectorEndX:-71.506, vectorEndY:25.237 2025-08-31 07:38:05.804 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:05.806 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7296745907839,EndPoint:69.5491976979527 2025-08-31 07:38:06.139 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:06 2025-08-31 07:38:06.151 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:06 2025-08-31 07:38:06.256 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:06.264 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_77_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:10.624 [Thd =34] Info Default Stripes are collected for data processing！strip_no:78 2025-08-31 07:38:10.624 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:10.624 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:10.625 [Thd =33] Info Default Stripes are collected for data processing！strip_no:78 2025-08-31 07:38:10.625 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:10.625 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:A_SourceLightType 2025-08-31 07:38:10.626 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:B_SourceLightType 2025-08-31 07:38:10.626 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,A_SourceLightType 2025-08-31 07:38:10.626 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,B_SourceLightType 2025-08-31 07:38:10.684 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:10 2025-08-31 07:38:10.703 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:10 2025-08-31 07:38:10.794 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;78/265, 2025-08-31 07:38:10.804 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:10.853 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:11.110 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:11.113 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_78_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:11.189 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 79 2025-08-31 07:38:11.189 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 79 2025-08-31 07:38:11.189 [Thd =262] Info Default 开始扫描条带； [79/265] 2025-08-31 07:38:11.198 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:38:11.201 [Thd =202] Info Default ***row:79, vectorBeginX:-71.506, vectorBeginY:24.809, captureBeginX:-69.887, captureBeginY:24.809, captureEndX:69.392, captureEndY:24.809, vectorEndX:71.295, vectorEndY:24.809 2025-08-31 07:38:11.201 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:11.203 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8866151198659,EndPoint:-69.3922571688707 2025-08-31 07:38:11.633 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:11.635 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_78_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:16.033 [Thd =34] Info Default Stripes are collected for data processing！strip_no:79 2025-08-31 07:38:16.033 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:16.033 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:16.033 [Thd =33] Info Default Stripes are collected for data processing！strip_no:79 2025-08-31 07:38:16.034 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:16.034 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:A_SourceLightType 2025-08-31 07:38:16.034 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:B_SourceLightType 2025-08-31 07:38:16.034 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,A_SourceLightType 2025-08-31 07:38:16.034 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,B_SourceLightType 2025-08-31 07:38:16.202 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;79/265, 2025-08-31 07:38:16.211 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:16.261 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:16.517 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:16.520 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_79_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:16.597 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 80 2025-08-31 07:38:16.597 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 80 2025-08-31 07:38:16.597 [Thd =340] Info Default 开始扫描条带； [80/265] 2025-08-31 07:38:16.606 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:38:16.609 [Thd =202] Info Default CaptureBeginX: 69.72969, CaptureBeginY:24.38058, CaptureEndX:-69.54918, CaptureEndY:24.38058, VectorBeginX:71.29458, VectorBeginY:24.38058, VectorEndX:-71.50567, VectorEndY:24.38058, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:38:16.609 [Thd =202] Info Default ***row:80, vectorBeginX:71.295, vectorBeginY:24.381, captureBeginX:69.730, captureBeginY:24.381, captureEndX:-69.549, captureEndY:24.381, vectorEndX:-71.506, vectorEndY:24.381 2025-08-31 07:38:16.609 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:16.611 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7296927792605,EndPoint:69.5491795094762 2025-08-31 07:38:16.726 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:16 2025-08-31 07:38:16.737 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:16 2025-08-31 07:38:17.038 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:17.040 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_79_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:21.429 [Thd =33] Info Default Stripes are collected for data processing！strip_no:80 2025-08-31 07:38:21.430 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:21.430 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:21.435 [Thd =34] Info Default Stripes are collected for data processing！strip_no:80 2025-08-31 07:38:21.435 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:21.435 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:B_SourceLightType 2025-08-31 07:38:21.435 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:A_SourceLightType 2025-08-31 07:38:21.435 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,B_SourceLightType 2025-08-31 07:38:21.436 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,A_SourceLightType 2025-08-31 07:38:21.602 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;80/265, 2025-08-31 07:38:21.611 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:21.661 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:21.756 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:21 2025-08-31 07:38:21.790 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:21 2025-08-31 07:38:21.935 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:21.937 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_80_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:22.023 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 81 2025-08-31 07:38:22.023 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 81 2025-08-31 07:38:22.023 [Thd =311] Info Default 开始扫描条带； [81/265] 2025-08-31 07:38:22.032 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:38:22.035 [Thd =202] Info Default ***row:81, vectorBeginX:-71.506, vectorBeginY:23.952, captureBeginX:-69.887, captureBeginY:23.952, captureEndX:69.392, captureEndY:23.952, vectorEndX:71.295, vectorEndY:23.952 2025-08-31 07:38:22.035 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:22.036 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8865974807058,EndPoint:-69.3922748080309 2025-08-31 07:38:22.438 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:22.440 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_80_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:26.871 [Thd =34] Info Default Stripes are collected for data processing！strip_no:81 2025-08-31 07:38:26.871 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:26.871 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:26.872 [Thd =33] Info Default Stripes are collected for data processing！strip_no:81 2025-08-31 07:38:26.872 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:26.872 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:A_SourceLightType 2025-08-31 07:38:26.872 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:B_SourceLightType 2025-08-31 07:38:26.872 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,A_SourceLightType 2025-08-31 07:38:26.872 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,B_SourceLightType 2025-08-31 07:38:27.051 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;81/265, 2025-08-31 07:38:27.060 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:27.105 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:27.309 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:27 2025-08-31 07:38:27.320 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:27 2025-08-31 07:38:27.358 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:27.360 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_81_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:27.444 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 82 2025-08-31 07:38:27.444 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 82 2025-08-31 07:38:27.444 [Thd =273] Info Default 开始扫描条带； [82/265] 2025-08-31 07:38:27.454 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:38:27.456 [Thd =202] Info Default CaptureBeginX: 69.72972, CaptureBeginY:23.52396, CaptureEndX:-69.54916, CaptureEndY:23.52396, VectorBeginX:71.29461, VectorBeginY:23.52396, VectorEndX:-71.50564, VectorEndY:23.52396, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:38:27.456 [Thd =202] Info Default ***row:82, vectorBeginX:71.295, vectorBeginY:23.524, captureBeginX:69.730, captureBeginY:23.524, captureEndX:-69.549, captureEndY:23.524, vectorEndX:-71.506, vectorEndY:23.524 2025-08-31 07:38:27.456 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:27.458 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.729716827112,EndPoint:69.5491554616246 2025-08-31 07:38:27.874 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:27.877 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_81_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:32.275 [Thd =34] Info Default Stripes are collected for data processing！strip_no:82 2025-08-31 07:38:32.276 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:32.276 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:32.276 [Thd =33] Info Default Stripes are collected for data processing！strip_no:82 2025-08-31 07:38:32.276 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:32.276 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:A_SourceLightType 2025-08-31 07:38:32.276 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:B_SourceLightType 2025-08-31 07:38:32.276 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,A_SourceLightType 2025-08-31 07:38:32.276 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,B_SourceLightType 2025-08-31 07:38:32.337 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:32 2025-08-31 07:38:32.362 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:32 2025-08-31 07:38:32.453 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;82/265, 2025-08-31 07:38:32.463 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:32.520 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:32.758 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:32.760 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_82_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:32.861 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 83 2025-08-31 07:38:32.861 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 83 2025-08-31 07:38:32.861 [Thd =322] Info Default 开始扫描条带； [83/265] 2025-08-31 07:38:32.870 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:38:32.873 [Thd =202] Info Default ***row:83, vectorBeginX:-71.506, vectorBeginY:23.096, captureBeginX:-69.887, captureBeginY:23.096, captureEndX:69.392, captureEndY:23.096, vectorEndX:71.295, vectorEndY:23.096 2025-08-31 07:38:32.873 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:32.875 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8865445021901,EndPoint:-69.3923277865465 2025-08-31 07:38:33.262 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:33.279 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_82_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:37.700 [Thd =33] Info Default Stripes are collected for data processing！strip_no:83 2025-08-31 07:38:37.700 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:37.700 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:37.702 [Thd =34] Info Default Stripes are collected for data processing！strip_no:83 2025-08-31 07:38:37.702 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:37.702 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:B_SourceLightType 2025-08-31 07:38:37.702 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:A_SourceLightType 2025-08-31 07:38:37.702 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,B_SourceLightType 2025-08-31 07:38:37.702 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,A_SourceLightType 2025-08-31 07:38:37.879 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;83/265, 2025-08-31 07:38:37.888 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:37.937 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:38.202 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:38.204 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_83_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:38.288 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 84 2025-08-31 07:38:38.288 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 84 2025-08-31 07:38:38.289 [Thd =311] Info Default 开始扫描条带； [84/265] 2025-08-31 07:38:38.298 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:38:38.300 [Thd =202] Info Default CaptureBeginX: 69.72977, CaptureBeginY:22.66735, CaptureEndX:-69.54910, CaptureEndY:22.66735, VectorBeginX:71.29466, VectorBeginY:22.66735, VectorEndX:-71.50559, VectorEndY:22.66735, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:38:38.300 [Thd =202] Info Default ***row:84, vectorBeginX:71.295, vectorBeginY:22.667, captureBeginX:69.730, captureBeginY:22.667, captureEndX:-69.549, captureEndY:22.667, vectorEndX:-71.506, vectorEndY:22.667 2025-08-31 07:38:38.301 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:38.303 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7297711484011,EndPoint:69.5491011403355 2025-08-31 07:38:38.392 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:38 2025-08-31 07:38:38.516 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:38 2025-08-31 07:38:38.722 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:38.724 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_83_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:43.132 [Thd =34] Info Default Stripes are collected for data processing！strip_no:84 2025-08-31 07:38:43.133 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:43.133 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:43.133 [Thd =33] Info Default Stripes are collected for data processing！strip_no:84 2025-08-31 07:38:43.133 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:43.133 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:A_SourceLightType 2025-08-31 07:38:43.134 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:B_SourceLightType 2025-08-31 07:38:43.134 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,A_SourceLightType 2025-08-31 07:38:43.134 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,B_SourceLightType 2025-08-31 07:38:43.296 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;84/265, 2025-08-31 07:38:43.305 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:43.342 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:43.546 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:43 2025-08-31 07:38:43.564 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:43 2025-08-31 07:38:43.615 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:43.617 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_84_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:43.694 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 85 2025-08-31 07:38:43.694 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 85 2025-08-31 07:38:43.694 [Thd =261] Info Default 开始扫描条带； [85/265] 2025-08-31 07:38:43.703 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:38:43.706 [Thd =202] Info Default ***row:85, vectorBeginX:-71.506, vectorBeginY:22.239, captureBeginX:-69.887, captureBeginY:22.239, captureEndX:69.392, captureEndY:22.239, vectorEndX:71.295, vectorEndY:22.239 2025-08-31 07:38:43.706 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:43.708 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8865043410573,EndPoint:-69.3923679476793 2025-08-31 07:38:44.151 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:44.154 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_84_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:48.533 [Thd =33] Info Default Stripes are collected for data processing！strip_no:85 2025-08-31 07:38:48.533 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:48.533 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:48.534 [Thd =34] Info Default Stripes are collected for data processing！strip_no:85 2025-08-31 07:38:48.550 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:48.550 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:B_SourceLightType 2025-08-31 07:38:48.550 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:A_SourceLightType 2025-08-31 07:38:48.550 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,B_SourceLightType 2025-08-31 07:38:48.550 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,A_SourceLightType 2025-08-31 07:38:48.709 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;85/265, 2025-08-31 07:38:48.718 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:48.764 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:49.037 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:49.040 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_85_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:49.118 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 86 2025-08-31 07:38:49.118 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 86 2025-08-31 07:38:49.118 [Thd =261] Info Default 开始扫描条带； [86/265] 2025-08-31 07:38:49.127 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:38:49.130 [Thd =202] Info Default CaptureBeginX: 69.72983, CaptureBeginY:21.81073, CaptureEndX:-69.54905, CaptureEndY:21.81073, VectorBeginX:71.29472, VectorBeginY:21.81073, VectorEndX:-71.50554, VectorEndY:21.81073, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:38:49.130 [Thd =202] Info Default ***row:86, vectorBeginX:71.295, vectorBeginY:21.811, captureBeginX:69.730, captureBeginY:21.811, captureEndX:-69.549, captureEndY:21.811, vectorEndX:-71.506, vectorEndY:21.811 2025-08-31 07:38:49.130 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:49.131 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7298258359011,EndPoint:69.5490464528355 2025-08-31 07:38:49.557 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:49.559 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_85_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:49.596 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:49 2025-08-31 07:38:49.609 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:49 2025-08-31 07:38:53.950 [Thd =34] Info Default Stripes are collected for data processing！strip_no:86 2025-08-31 07:38:53.950 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:53.950 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:53.951 [Thd =33] Info Default Stripes are collected for data processing！strip_no:86 2025-08-31 07:38:53.951 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:53.951 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:A_SourceLightType 2025-08-31 07:38:53.951 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:B_SourceLightType 2025-08-31 07:38:53.951 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,A_SourceLightType 2025-08-31 07:38:53.951 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,B_SourceLightType 2025-08-31 07:38:54.136 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;86/265, 2025-08-31 07:38:54.139 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:38:54 2025-08-31 07:38:54.144 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:54.164 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:38:54 2025-08-31 07:38:54.196 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:54.454 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:54.456 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_86_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:54.533 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 87 2025-08-31 07:38:54.533 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 87 2025-08-31 07:38:54.533 [Thd =299] Info Default 开始扫描条带； [87/265] 2025-08-31 07:38:54.542 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:38:54.545 [Thd =202] Info Default ***row:87, vectorBeginX:-71.506, vectorBeginY:21.382, captureBeginX:-69.886, captureBeginY:21.382, captureEndX:69.392, captureEndY:21.382, vectorEndX:71.295, vectorEndY:21.382 2025-08-31 07:38:54.545 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:38:54.547 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8864483718191,EndPoint:-69.3924239169176 2025-08-31 07:38:54.975 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:38:54.978 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_86_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:59.376 [Thd =34] Info Default Stripes are collected for data processing！strip_no:87 2025-08-31 07:38:59.376 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:59.377 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:38:59.377 [Thd =33] Info Default Stripes are collected for data processing！strip_no:87 2025-08-31 07:38:59.377 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:38:59.377 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:A_SourceLightType 2025-08-31 07:38:59.377 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:B_SourceLightType 2025-08-31 07:38:59.377 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,A_SourceLightType 2025-08-31 07:38:59.377 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,B_SourceLightType 2025-08-31 07:38:59.544 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;87/265, 2025-08-31 07:38:59.554 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:38:59.652 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:38:59.863 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:38:59.865 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_87_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:38:59.998 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 88 2025-08-31 07:38:59.998 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 88 2025-08-31 07:38:59.998 [Thd =290] Info Default 开始扫描条带； [88/265] 2025-08-31 07:39:00.007 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:39:00.010 [Thd =202] Info Default CaptureBeginX: 69.72986, CaptureBeginY:20.95411, CaptureEndX:-69.54901, CaptureEndY:20.95411, VectorBeginX:71.29475, VectorBeginY:20.95411, VectorEndX:-71.50550, VectorEndY:20.95411, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:39:00.010 [Thd =202] Info Default ***row:88, vectorBeginX:71.295, vectorBeginY:20.954, captureBeginX:69.730, captureBeginY:20.954, captureEndX:-69.549, captureEndY:20.954, vectorEndX:-71.506, vectorEndY:20.954 2025-08-31 07:39:00.010 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:00.011 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7298584897097,EndPoint:69.549013799027 2025-08-31 07:39:00.260 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:00 2025-08-31 07:39:00.272 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:00 2025-08-31 07:39:00.367 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:00.369 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_87_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:04.831 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:04 2025-08-31 07:39:04.833 [Thd =33] Info Default Stripes are collected for data processing！strip_no:88 2025-08-31 07:39:04.833 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:04.833 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:04.834 [Thd =34] Info Default Stripes are collected for data processing！strip_no:88 2025-08-31 07:39:04.834 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:04.834 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:B_SourceLightType 2025-08-31 07:39:04.834 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:A_SourceLightType 2025-08-31 07:39:04.834 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,B_SourceLightType 2025-08-31 07:39:04.834 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,A_SourceLightType 2025-08-31 07:39:04.843 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:04 2025-08-31 07:39:05.027 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;88/265, 2025-08-31 07:39:05.036 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:05.095 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:05.335 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:05.337 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_88_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:05.431 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 89 2025-08-31 07:39:05.431 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 89 2025-08-31 07:39:05.431 [Thd =265] Info Default 开始扫描条带； [89/265] 2025-08-31 07:39:05.447 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:39:05.450 [Thd =202] Info Default ***row:89, vectorBeginX:-71.505, vectorBeginY:20.526, captureBeginX:-69.886, captureBeginY:20.526, captureEndX:69.392, captureEndY:20.526, vectorEndX:71.295, vectorEndY:20.526 2025-08-31 07:39:05.450 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:05.468 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8864113234792,EndPoint:-69.3924609652574 2025-08-31 07:39:05.836 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:05.839 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_88_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:10.292 [Thd =34] Info Default Stripes are collected for data processing！strip_no:89 2025-08-31 07:39:10.292 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:10.292 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:10.293 [Thd =33] Info Default Stripes are collected for data processing！strip_no:89 2025-08-31 07:39:10.293 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:10.293 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:A_SourceLightType 2025-08-31 07:39:10.293 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:B_SourceLightType 2025-08-31 07:39:10.293 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,A_SourceLightType 2025-08-31 07:39:10.294 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,B_SourceLightType 2025-08-31 07:39:10.366 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:10 2025-08-31 07:39:10.386 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:10 2025-08-31 07:39:10.463 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;89/265, 2025-08-31 07:39:10.473 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:10.505 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:10.790 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:10.792 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_89_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:10.842 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 90 2025-08-31 07:39:10.842 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 90 2025-08-31 07:39:10.842 [Thd =193] Info Default 开始扫描条带； [90/265] 2025-08-31 07:39:10.860 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:39:10.863 [Thd =202] Info Default CaptureBeginX: 69.72990, CaptureBeginY:20.09749, CaptureEndX:-69.54897, CaptureEndY:20.09749, VectorBeginX:71.29479, VectorBeginY:20.09749, VectorEndX:-71.50546, VectorEndY:20.09749, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:39:10.863 [Thd =202] Info Default ***row:90, vectorBeginX:71.295, vectorBeginY:20.097, captureBeginX:69.730, captureBeginY:20.097, captureEndX:-69.549, captureEndY:20.097, vectorEndX:-71.505, vectorEndY:20.097 2025-08-31 07:39:10.863 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:10.866 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7299010312136,EndPoint:69.548971257523 2025-08-31 07:39:11.298 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:11.301 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_89_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:15.689 [Thd =33] Info Default Stripes are collected for data processing！strip_no:90 2025-08-31 07:39:15.689 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:15.689 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:15.689 [Thd =34] Info Default Stripes are collected for data processing！strip_no:90 2025-08-31 07:39:15.689 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:15.689 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:B_SourceLightType 2025-08-31 07:39:15.689 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:A_SourceLightType 2025-08-31 07:39:15.689 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,B_SourceLightType 2025-08-31 07:39:15.690 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,A_SourceLightType 2025-08-31 07:39:15.875 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;90/265, 2025-08-31 07:39:15.885 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:15.922 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:15 2025-08-31 07:39:15.923 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:15.931 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:15 2025-08-31 07:39:16.193 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:16.195 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_90_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:16.258 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 91 2025-08-31 07:39:16.258 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 91 2025-08-31 07:39:16.258 [Thd =265] Info Default 开始扫描条带； [91/265] 2025-08-31 07:39:16.267 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:39:16.270 [Thd =202] Info Default ***row:91, vectorBeginX:-71.505, vectorBeginY:19.669, captureBeginX:-69.886, captureBeginY:19.669, captureEndX:69.392, captureEndY:19.669, vectorEndX:71.295, vectorEndY:19.669 2025-08-31 07:39:16.271 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:16.272 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8863791579519,EndPoint:-69.3924931307848 2025-08-31 07:39:16.707 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:16.710 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_90_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:21.101 [Thd =33] Info Default Stripes are collected for data processing！strip_no:91 2025-08-31 07:39:21.101 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:21.101 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:21.102 [Thd =34] Info Default Stripes are collected for data processing！strip_no:91 2025-08-31 07:39:21.102 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:21.102 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:B_SourceLightType 2025-08-31 07:39:21.103 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:A_SourceLightType 2025-08-31 07:39:21.103 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,B_SourceLightType 2025-08-31 07:39:21.103 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,A_SourceLightType 2025-08-31 07:39:21.265 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;91/265, 2025-08-31 07:39:21.274 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:21.324 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:21.585 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:21.587 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_91_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:21.659 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 92 2025-08-31 07:39:21.659 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 92 2025-08-31 07:39:21.659 [Thd =340] Info Default 开始扫描条带； [92/265] 2025-08-31 07:39:21.668 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:39:21.671 [Thd =202] Info Default CaptureBeginX: 69.72993, CaptureBeginY:19.24087, CaptureEndX:-69.54894, CaptureEndY:19.24087, VectorBeginX:71.29482, VectorBeginY:19.24087, VectorEndX:-71.50543, VectorEndY:19.24087, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:39:21.671 [Thd =202] Info Default ***row:92, vectorBeginX:71.295, vectorBeginY:19.241, captureBeginX:69.730, captureBeginY:19.241, captureEndX:-69.549, captureEndY:19.241, vectorEndX:-71.505, vectorEndY:19.241 2025-08-31 07:39:21.671 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:21.673 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7299275815066,EndPoint:69.5489447072301 2025-08-31 07:39:21.972 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:21 2025-08-31 07:39:21.985 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:21 2025-08-31 07:39:22.113 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:22.116 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_91_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:26.495 [Thd =34] Info Default Stripes are collected for data processing！strip_no:92 2025-08-31 07:39:26.496 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:26.496 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:26.496 [Thd =33] Info Default Stripes are collected for data processing！strip_no:92 2025-08-31 07:39:26.496 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:26.496 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:A_SourceLightType 2025-08-31 07:39:26.496 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:B_SourceLightType 2025-08-31 07:39:26.497 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,A_SourceLightType 2025-08-31 07:39:26.497 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,B_SourceLightType 2025-08-31 07:39:26.674 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;92/265, 2025-08-31 07:39:26.683 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:26.762 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:26.996 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:26.999 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_92_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:27.002 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:27 2025-08-31 07:39:27.021 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:27 2025-08-31 07:39:27.109 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 93 2025-08-31 07:39:27.109 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 93 2025-08-31 07:39:27.109 [Thd =261] Info Default 开始扫描条带； [93/265] 2025-08-31 07:39:27.118 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:39:27.121 [Thd =202] Info Default ***row:93, vectorBeginX:-71.505, vectorBeginY:18.813, captureBeginX:-69.886, captureBeginY:18.813, captureEndX:69.393, captureEndY:18.813, vectorEndX:71.295, vectorEndY:18.813 2025-08-31 07:39:27.121 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:27.123 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8863480300222,EndPoint:-69.3925242587145 2025-08-31 07:39:27.499 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:27.502 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_92_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:31.941 [Thd =34] Info Default Stripes are collected for data processing！strip_no:93 2025-08-31 07:39:31.942 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:31.942 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:31.942 [Thd =33] Info Default Stripes are collected for data processing！strip_no:93 2025-08-31 07:39:31.942 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:31.943 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:A_SourceLightType 2025-08-31 07:39:31.943 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:B_SourceLightType 2025-08-31 07:39:31.943 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,A_SourceLightType 2025-08-31 07:39:31.943 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,B_SourceLightType 2025-08-31 07:39:32.122 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;93/265, 2025-08-31 07:39:32.131 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:32.165 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:32.439 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:32.441 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_93_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:32.508 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 94 2025-08-31 07:39:32.508 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 94 2025-08-31 07:39:32.508 [Thd =265] Info Default 开始扫描条带； [94/265] 2025-08-31 07:39:32.518 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:39:32.521 [Thd =202] Info Default CaptureBeginX: 69.72998, CaptureBeginY:18.38425, CaptureEndX:-69.54889, CaptureEndY:18.38425, VectorBeginX:71.29487, VectorBeginY:18.38425, VectorEndX:-71.50538, VectorEndY:18.38425, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:39:32.521 [Thd =202] Info Default ***row:94, vectorBeginX:71.295, vectorBeginY:18.384, captureBeginX:69.730, captureBeginY:18.384, captureEndX:-69.549, captureEndY:18.384, vectorEndX:-71.505, vectorEndY:18.384 2025-08-31 07:39:32.521 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:32.523 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7299776913698,EndPoint:69.5488945973668 2025-08-31 07:39:32.553 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:32 2025-08-31 07:39:32.565 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:32 2025-08-31 07:39:32.941 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:32.957 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_93_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:37.340 [Thd =34] Info Default Stripes are collected for data processing！strip_no:94 2025-08-31 07:39:37.340 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:37.340 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:37.341 [Thd =33] Info Default Stripes are collected for data processing！strip_no:94 2025-08-31 07:39:37.341 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:37.341 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:A_SourceLightType 2025-08-31 07:39:37.341 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:B_SourceLightType 2025-08-31 07:39:37.341 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,A_SourceLightType 2025-08-31 07:39:37.341 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,B_SourceLightType 2025-08-31 07:39:37.522 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;94/265, 2025-08-31 07:39:37.531 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:37.581 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:37 2025-08-31 07:39:37.581 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:37.589 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:37 2025-08-31 07:39:37.823 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:37.826 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_94_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:37.925 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 95 2025-08-31 07:39:37.925 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 95 2025-08-31 07:39:37.925 [Thd =311] Info Default 开始扫描条带； [95/265] 2025-08-31 07:39:37.950 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:39:37.953 [Thd =202] Info Default ***row:95, vectorBeginX:-71.505, vectorBeginY:17.956, captureBeginX:-69.886, captureBeginY:17.956, captureEndX:69.393, captureEndY:17.956, vectorEndX:71.295, vectorEndY:17.956 2025-08-31 07:39:37.953 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:37.955 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8862855300222,EndPoint:-69.3925867587145 2025-08-31 07:39:38.326 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:38.329 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_94_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:42.778 [Thd =33] Info Default Stripes are collected for data processing！strip_no:95 2025-08-31 07:39:42.778 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:42.778 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:42.779 [Thd =34] Info Default Stripes are collected for data processing！strip_no:95 2025-08-31 07:39:42.779 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:42.779 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:B_SourceLightType 2025-08-31 07:39:42.779 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:A_SourceLightType 2025-08-31 07:39:42.779 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,B_SourceLightType 2025-08-31 07:39:42.779 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,A_SourceLightType 2025-08-31 07:39:42.958 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;95/265, 2025-08-31 07:39:42.967 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:43.019 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:43.258 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:43.261 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_95_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:43.360 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 96 2025-08-31 07:39:43.360 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 96 2025-08-31 07:39:43.360 [Thd =322] Info Default 开始扫描条带； [96/265] 2025-08-31 07:39:43.369 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:39:43.372 [Thd =202] Info Default CaptureBeginX: 69.73001, CaptureBeginY:17.52764, CaptureEndX:-69.54886, CaptureEndY:17.52764, VectorBeginX:71.29490, VectorBeginY:17.52764, VectorEndX:-71.50535, VectorEndY:17.52764, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:39:43.373 [Thd =202] Info Default ***row:96, vectorBeginX:71.295, vectorBeginY:17.528, captureBeginX:69.730, captureBeginY:17.528, captureEndX:-69.549, captureEndY:17.528, vectorEndX:-71.505, vectorEndY:17.528 2025-08-31 07:39:43.373 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:43.374 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7300101010378,EndPoint:69.5488621876988 2025-08-31 07:39:43.627 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:43 2025-08-31 07:39:43.639 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:43 2025-08-31 07:39:43.793 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:43.796 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_95_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:48.192 [Thd =34] Info Default Stripes are collected for data processing！strip_no:96 2025-08-31 07:39:48.192 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:48.192 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:48.192 [Thd =33] Info Default Stripes are collected for data processing！strip_no:96 2025-08-31 07:39:48.192 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:48.192 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:A_SourceLightType 2025-08-31 07:39:48.192 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:B_SourceLightType 2025-08-31 07:39:48.193 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,A_SourceLightType 2025-08-31 07:39:48.193 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,B_SourceLightType 2025-08-31 07:39:48.373 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;96/265, 2025-08-31 07:39:48.382 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:48.420 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:48.662 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:48 2025-08-31 07:39:48.674 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:48 2025-08-31 07:39:48.695 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:48.698 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_96_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:48.762 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 97 2025-08-31 07:39:48.762 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 97 2025-08-31 07:39:48.762 [Thd =338] Info Default 开始扫描条带； [97/265] 2025-08-31 07:39:48.785 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:39:48.788 [Thd =202] Info Default ***row:97, vectorBeginX:-71.505, vectorBeginY:17.099, captureBeginX:-69.886, captureBeginY:17.099, captureEndX:69.393, captureEndY:17.099, vectorEndX:71.295, vectorEndY:17.099 2025-08-31 07:39:48.788 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:48.791 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8862635573659,EndPoint:-69.3926087313707 2025-08-31 07:39:49.199 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:49.201 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_96_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:53.611 [Thd =33] Info Default Stripes are collected for data processing！strip_no:97 2025-08-31 07:39:53.612 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:53.612 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:53.612 [Thd =34] Info Default Stripes are collected for data processing！strip_no:97 2025-08-31 07:39:53.626 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:53.626 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:B_SourceLightType 2025-08-31 07:39:53.626 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:A_SourceLightType 2025-08-31 07:39:53.627 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,B_SourceLightType 2025-08-31 07:39:53.627 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,A_SourceLightType 2025-08-31 07:39:53.781 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;97/265, 2025-08-31 07:39:53.790 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:53.834 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:54.112 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:39:54.114 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_97_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:54.185 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 98 2025-08-31 07:39:54.185 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 98 2025-08-31 07:39:54.185 [Thd =321] Info Default 开始扫描条带； [98/265] 2025-08-31 07:39:54.194 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:39:54.197 [Thd =202] Info Default CaptureBeginX: 69.73002, CaptureBeginY:16.67102, CaptureEndX:-69.54886, CaptureEndY:16.67102, VectorBeginX:71.29491, VectorBeginY:16.67102, VectorEndX:-71.50535, VectorEndY:16.67102, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:39:54.197 [Thd =202] Info Default ***row:98, vectorBeginX:71.295, vectorBeginY:16.671, captureBeginX:69.730, captureBeginY:16.671, captureEndX:-69.549, captureEndY:16.671, vectorEndX:-71.505, vectorEndY:16.671 2025-08-31 07:39:54.197 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:54.199 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7300157162722,EndPoint:69.5488565724644 2025-08-31 07:39:54.634 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:54.637 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_97_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:54.711 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:54 2025-08-31 07:39:54.723 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:54 2025-08-31 07:39:59.017 [Thd =34] Info Default Stripes are collected for data processing！strip_no:98 2025-08-31 07:39:59.017 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:59.017 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:39:59.018 [Thd =33] Info Default Stripes are collected for data processing！strip_no:98 2025-08-31 07:39:59.018 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:39:59.018 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:A_SourceLightType 2025-08-31 07:39:59.018 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:B_SourceLightType 2025-08-31 07:39:59.018 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,A_SourceLightType 2025-08-31 07:39:59.018 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,B_SourceLightType 2025-08-31 07:39:59.198 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;98/265, 2025-08-31 07:39:59.207 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:39:59.238 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:39:59 2025-08-31 07:39:59.255 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:39:59.276 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:39:59 2025-08-31 07:39:59.501 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:39:59.504 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_98_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:39:59.609 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 99 2025-08-31 07:39:59.609 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 99 2025-08-31 07:39:59.609 [Thd =340] Info Default 开始扫描条带； [99/265] 2025-08-31 07:39:59.617 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:39:59.620 [Thd =202] Info Default ***row:99, vectorBeginX:-71.505, vectorBeginY:16.243, captureBeginX:-69.886, captureBeginY:16.243, captureEndX:69.393, captureEndY:16.243, vectorEndX:71.295, vectorEndY:16.243 2025-08-31 07:39:59.620 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:39:59.621 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8862689894948,EndPoint:-69.3926032992418 2025-08-31 07:40:00.003 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:00.006 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_98_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:04.310 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:04 2025-08-31 07:40:04.321 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:04 2025-08-31 07:40:04.442 [Thd =34] Info Default Stripes are collected for data processing！strip_no:99 2025-08-31 07:40:04.442 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:04.442 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:04.443 [Thd =33] Info Default Stripes are collected for data processing！strip_no:99 2025-08-31 07:40:04.443 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:04.443 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:A_SourceLightType 2025-08-31 07:40:04.443 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:B_SourceLightType 2025-08-31 07:40:04.443 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,A_SourceLightType 2025-08-31 07:40:04.443 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,B_SourceLightType 2025-08-31 07:40:04.620 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;99/265, 2025-08-31 07:40:04.629 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:04.671 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:04.930 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:04.932 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_99_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:05.009 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 100 2025-08-31 07:40:05.009 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 100 2025-08-31 07:40:05.009 [Thd =320] Info Default 开始扫描条带； [100/265] 2025-08-31 07:40:05.020 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:40:05.022 [Thd =202] Info Default CaptureBeginX: 69.73007, CaptureBeginY:15.81440, CaptureEndX:-69.54881, CaptureEndY:15.81440, VectorBeginX:71.29496, VectorBeginY:15.81440, VectorEndX:-71.50529, VectorEndY:15.81440, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:40:05.022 [Thd =202] Info Default ***row:100, vectorBeginX:71.295, vectorBeginY:15.814, captureBeginX:69.730, captureBeginY:15.814, captureEndX:-69.549, captureEndY:15.814, vectorEndX:-71.505, vectorEndY:15.814 2025-08-31 07:40:05.022 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:05.024 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7300672299441,EndPoint:69.5488050587926 2025-08-31 07:40:05.452 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:05.454 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_99_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:09.847 [Thd =33] Info Default Stripes are collected for data processing！strip_no:100 2025-08-31 07:40:09.848 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:09.848 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:09.851 [Thd =34] Info Default Stripes are collected for data processing！strip_no:100 2025-08-31 07:40:09.851 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:09.851 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:B_SourceLightType 2025-08-31 07:40:09.851 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:A_SourceLightType 2025-08-31 07:40:09.852 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,B_SourceLightType 2025-08-31 07:40:09.852 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,A_SourceLightType 2025-08-31 07:40:10.034 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;100/265, 2025-08-31 07:40:10.044 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:10.093 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:10.359 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:10 2025-08-31 07:40:10.359 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:10.362 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_100_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:10.369 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:10 2025-08-31 07:40:10.430 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 101 2025-08-31 07:40:10.430 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 101 2025-08-31 07:40:10.430 [Thd =338] Info Default 开始扫描条带； [101/265] 2025-08-31 07:40:10.442 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:40:10.459 [Thd =202] Info Default ***row:101, vectorBeginX:-71.505, vectorBeginY:15.386, captureBeginX:-69.886, captureBeginY:15.386, captureEndX:69.393, captureEndY:15.386, vectorEndX:71.295, vectorEndY:15.386 2025-08-31 07:40:10.460 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:10.461 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8862109450612,EndPoint:-69.3926613436754 2025-08-31 07:40:10.864 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:10.866 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_100_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:15.280 [Thd =34] Info Default Stripes are collected for data processing！strip_no:101 2025-08-31 07:40:15.280 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:15.281 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:15.281 [Thd =33] Info Default Stripes are collected for data processing！strip_no:101 2025-08-31 07:40:15.281 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:15.281 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:A_SourceLightType 2025-08-31 07:40:15.281 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:B_SourceLightType 2025-08-31 07:40:15.281 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,A_SourceLightType 2025-08-31 07:40:15.281 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,B_SourceLightType 2025-08-31 07:40:15.449 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;101/265, 2025-08-31 07:40:15.458 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:15.517 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:15.776 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:15.779 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_101_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:15.854 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 102 2025-08-31 07:40:15.854 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 102 2025-08-31 07:40:15.854 [Thd =302] Info Default 开始扫描条带； [102/265] 2025-08-31 07:40:15.863 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:40:15.866 [Thd =202] Info Default CaptureBeginX: 69.73008, CaptureBeginY:14.95777, CaptureEndX:-69.54879, CaptureEndY:14.95777, VectorBeginX:71.29497, VectorBeginY:14.95777, VectorEndX:-71.50528, VectorEndY:14.95777, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:40:15.866 [Thd =202] Info Default ***row:102, vectorBeginX:71.295, vectorBeginY:14.958, captureBeginX:69.730, captureBeginY:14.958, captureEndX:-69.549, captureEndY:14.958, vectorEndX:-71.505, vectorEndY:14.958 2025-08-31 07:40:15.866 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:15.868 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7300829770144,EndPoint:69.5487893117223 2025-08-31 07:40:15.902 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:15 2025-08-31 07:40:15.914 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:15 2025-08-31 07:40:16.299 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:16.301 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_101_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:20.443 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:20 2025-08-31 07:40:20.463 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:20 2025-08-31 07:40:20.686 [Thd =33] Info Default Stripes are collected for data processing！strip_no:102 2025-08-31 07:40:20.686 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:20.686 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:20.687 [Thd =34] Info Default Stripes are collected for data processing！strip_no:102 2025-08-31 07:40:20.688 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:20.688 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:B_SourceLightType 2025-08-31 07:40:20.688 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:A_SourceLightType 2025-08-31 07:40:20.688 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,B_SourceLightType 2025-08-31 07:40:20.688 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,A_SourceLightType 2025-08-31 07:40:20.858 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;102/265, 2025-08-31 07:40:20.867 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:20.916 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:21.172 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:21.174 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_102_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:21.254 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 103 2025-08-31 07:40:21.254 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 103 2025-08-31 07:40:21.254 [Thd =340] Info Default 开始扫描条带； [103/265] 2025-08-31 07:40:21.263 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:40:21.265 [Thd =202] Info Default ***row:103, vectorBeginX:-71.505, vectorBeginY:14.529, captureBeginX:-69.886, captureBeginY:14.529, captureEndX:69.393, captureEndY:14.529, vectorEndX:71.295, vectorEndY:14.529 2025-08-31 07:40:21.266 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:21.267 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8862005080495,EndPoint:-69.3926717806871 2025-08-31 07:40:21.701 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:21.703 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_102_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:25.982 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:25 2025-08-31 07:40:25.994 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:25 2025-08-31 07:40:26.087 [Thd =34] Info Default Stripes are collected for data processing！strip_no:103 2025-08-31 07:40:26.087 [Thd =33] Info Default Stripes are collected for data processing！strip_no:103 2025-08-31 07:40:26.087 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:26.088 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:26.088 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:26.088 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:B_SourceLightType 2025-08-31 07:40:26.088 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:A_SourceLightType 2025-08-31 07:40:26.088 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,B_SourceLightType 2025-08-31 07:40:26.088 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,A_SourceLightType 2025-08-31 07:40:26.265 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;103/265, 2025-08-31 07:40:26.275 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:26.315 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:26.583 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:26.585 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_103_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:26.660 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 104 2025-08-31 07:40:26.660 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 104 2025-08-31 07:40:26.660 [Thd =322] Info Default 开始扫描条带； [104/265] 2025-08-31 07:40:26.669 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:40:26.672 [Thd =202] Info Default CaptureBeginX: 69.73010, CaptureBeginY:14.10115, CaptureEndX:-69.54878, CaptureEndY:14.10115, VectorBeginX:71.29499, VectorBeginY:14.10115, VectorEndX:-71.50526, VectorEndY:14.10115, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:40:26.672 [Thd =202] Info Default ***row:104, vectorBeginX:71.295, vectorBeginY:14.101, captureBeginX:69.730, captureBeginY:14.101, captureEndX:-69.549, captureEndY:14.101, vectorEndX:-71.505, vectorEndY:14.101 2025-08-31 07:40:26.672 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:26.674 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7300971371706,EndPoint:69.548775151566 2025-08-31 07:40:27.090 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:27.092 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_103_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:31.499 [Thd =34] Info Default Stripes are collected for data processing！strip_no:104 2025-08-31 07:40:31.499 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:31.499 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:31.501 [Thd =33] Info Default Stripes are collected for data processing！strip_no:104 2025-08-31 07:40:31.501 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:31.501 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:A_SourceLightType 2025-08-31 07:40:31.501 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:B_SourceLightType 2025-08-31 07:40:31.501 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,A_SourceLightType 2025-08-31 07:40:31.501 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,B_SourceLightType 2025-08-31 07:40:31.543 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:31 2025-08-31 07:40:31.554 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:31 2025-08-31 07:40:31.669 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;104/265, 2025-08-31 07:40:31.678 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:31.756 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:31.982 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:31.985 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_104_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:32.107 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 105 2025-08-31 07:40:32.107 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 105 2025-08-31 07:40:32.107 [Thd =311] Info Default 开始扫描条带； [105/265] 2025-08-31 07:40:32.116 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:40:32.119 [Thd =202] Info Default ***row:105, vectorBeginX:-71.505, vectorBeginY:13.673, captureBeginX:-69.886, captureBeginY:13.673, captureEndX:69.393, captureEndY:13.673, vectorEndX:71.295, vectorEndY:13.673 2025-08-31 07:40:32.119 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:32.120 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8861817092214,EndPoint:-69.3926905795152 2025-08-31 07:40:32.487 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:32.489 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_104_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:36.957 [Thd =33] Info Default Stripes are collected for data processing！strip_no:105 2025-08-31 07:40:36.958 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:36.958 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:36.958 [Thd =34] Info Default Stripes are collected for data processing！strip_no:105 2025-08-31 07:40:36.959 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:36.959 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:B_SourceLightType 2025-08-31 07:40:36.959 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:A_SourceLightType 2025-08-31 07:40:36.959 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,B_SourceLightType 2025-08-31 07:40:36.959 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,A_SourceLightType 2025-08-31 07:40:37.114 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;105/265, 2025-08-31 07:40:37.123 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:37.228 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:37.470 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:37.473 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_105_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:37.583 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 106 2025-08-31 07:40:37.583 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 106 2025-08-31 07:40:37.583 [Thd =265] Info Default 开始扫描条带； [106/265] 2025-08-31 07:40:37.592 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:40:37.595 [Thd =202] Info Default CaptureBeginX: 69.73014, CaptureBeginY:13.24453, CaptureEndX:-69.54873, CaptureEndY:13.24453, VectorBeginX:71.29503, VectorBeginY:13.24453, VectorEndX:-71.50522, VectorEndY:13.24453, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:40:37.595 [Thd =202] Info Default ***row:106, vectorBeginX:71.295, vectorBeginY:13.245, captureBeginX:69.730, captureBeginY:13.245, captureEndX:-69.549, captureEndY:13.245, vectorEndX:-71.505, vectorEndY:13.245 2025-08-31 07:40:37.595 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:37.597 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7301408383425,EndPoint:69.5487314503941 2025-08-31 07:40:37.993 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:37.995 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_105_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:38.089 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:38 2025-08-31 07:40:38.102 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:38 2025-08-31 07:40:42.415 [Thd =34] Info Default Stripes are collected for data processing！strip_no:106 2025-08-31 07:40:42.415 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:42.415 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:42.416 [Thd =33] Info Default Stripes are collected for data processing！strip_no:106 2025-08-31 07:40:42.416 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:42.416 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:A_SourceLightType 2025-08-31 07:40:42.416 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:B_SourceLightType 2025-08-31 07:40:42.416 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,A_SourceLightType 2025-08-31 07:40:42.416 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,B_SourceLightType 2025-08-31 07:40:42.594 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;106/265, 2025-08-31 07:40:42.603 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:42.631 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:42 2025-08-31 07:40:42.723 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:42.736 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:42 2025-08-31 07:40:42.894 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:42.897 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_106_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:43.062 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 107 2025-08-31 07:40:43.062 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 107 2025-08-31 07:40:43.062 [Thd =265] Info Default 开始扫描条带； [107/265] 2025-08-31 07:40:43.071 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:40:43.074 [Thd =202] Info Default ***row:107, vectorBeginX:-71.505, vectorBeginY:12.816, captureBeginX:-69.886, captureBeginY:12.816, captureEndX:69.393, captureEndY:12.816, vectorEndX:71.295, vectorEndY:12.816 2025-08-31 07:40:43.074 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:43.076 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8861271437917,EndPoint:-69.3927451449449 2025-08-31 07:40:43.393 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:43.396 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_106_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:47.901 [Thd =34] Info Default Stripes are collected for data processing！strip_no:107 2025-08-31 07:40:47.901 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:47.901 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:47.903 [Thd =33] Info Default Stripes are collected for data processing！strip_no:107 2025-08-31 07:40:47.903 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:47.903 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:A_SourceLightType 2025-08-31 07:40:47.903 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:B_SourceLightType 2025-08-31 07:40:47.904 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,A_SourceLightType 2025-08-31 07:40:47.904 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,B_SourceLightType 2025-08-31 07:40:48.069 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;107/265, 2025-08-31 07:40:48.078 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:48.165 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:48.257 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:48 2025-08-31 07:40:48.267 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:48 2025-08-31 07:40:48.389 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:48.391 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_107_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:48.502 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 108 2025-08-31 07:40:48.502 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 108 2025-08-31 07:40:48.502 [Thd =265] Info Default 开始扫描条带； [108/265] 2025-08-31 07:40:48.519 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:40:48.521 [Thd =202] Info Default CaptureBeginX: 69.73019, CaptureBeginY:12.38790, CaptureEndX:-69.54868, CaptureEndY:12.38790, VectorBeginX:71.29508, VectorBeginY:12.38790, VectorEndX:-71.50517, VectorEndY:12.38790, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:40:48.522 [Thd =202] Info Default ***row:108, vectorBeginX:71.295, vectorBeginY:12.388, captureBeginX:69.730, captureBeginY:12.388, captureEndX:-69.549, captureEndY:12.388, vectorEndX:-71.505, vectorEndY:12.388 2025-08-31 07:40:48.522 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:48.523 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7301882016237,EndPoint:69.5486840871129 2025-08-31 07:40:48.887 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:48.889 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_107_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:53.285 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:53 2025-08-31 07:40:53.295 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:53 2025-08-31 07:40:53.352 [Thd =34] Info Default Stripes are collected for data processing！strip_no:108 2025-08-31 07:40:53.352 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:53.352 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:53.353 [Thd =33] Info Default Stripes are collected for data processing！strip_no:108 2025-08-31 07:40:53.353 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:53.353 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:A_SourceLightType 2025-08-31 07:40:53.353 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:B_SourceLightType 2025-08-31 07:40:53.353 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,A_SourceLightType 2025-08-31 07:40:53.354 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,B_SourceLightType 2025-08-31 07:40:53.515 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;108/265, 2025-08-31 07:40:53.524 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:53.636 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:53.839 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:53.842 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_108_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:53.972 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 109 2025-08-31 07:40:53.972 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 109 2025-08-31 07:40:53.972 [Thd =302] Info Default 开始扫描条带； [109/265] 2025-08-31 07:40:53.989 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:40:53.992 [Thd =202] Info Default ***row:109, vectorBeginX:-71.505, vectorBeginY:11.960, captureBeginX:-69.886, captureBeginY:11.960, captureEndX:69.393, captureEndY:11.960, vectorEndX:71.295, vectorEndY:11.960 2025-08-31 07:40:53.992 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:53.995 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8860820998464,EndPoint:-69.3927901888902 2025-08-31 07:40:54.352 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:54.354 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_108_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:58.816 [Thd =33] Info Default Stripes are collected for data processing！strip_no:109 2025-08-31 07:40:58.816 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:58.816 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:40:58.817 [Thd =34] Info Default Stripes are collected for data processing！strip_no:109 2025-08-31 07:40:58.817 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:40:58.817 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:B_SourceLightType 2025-08-31 07:40:58.817 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:A_SourceLightType 2025-08-31 07:40:58.817 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,B_SourceLightType 2025-08-31 07:40:58.817 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,A_SourceLightType 2025-08-31 07:40:59.001 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;109/265, 2025-08-31 07:40:59.010 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:40:59.096 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:40:59.318 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:40:59.320 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_109_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:40:59.333 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:40:59 2025-08-31 07:40:59.345 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:40:59 2025-08-31 07:40:59.436 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 110 2025-08-31 07:40:59.436 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 110 2025-08-31 07:40:59.436 [Thd =193] Info Default 开始扫描条带； [110/265] 2025-08-31 07:40:59.445 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:40:59.448 [Thd =202] Info Default CaptureBeginX: 69.73024, CaptureBeginY:11.53129, CaptureEndX:-69.54863, CaptureEndY:11.53129, VectorBeginX:71.29513, VectorBeginY:11.53129, VectorEndX:-71.50512, VectorEndY:11.53129, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:40:59.448 [Thd =202] Info Default ***row:110, vectorBeginX:71.295, vectorBeginY:11.531, captureBeginX:69.730, captureBeginY:11.531, captureEndX:-69.549, captureEndY:11.531, vectorEndX:-71.505, vectorEndY:11.531 2025-08-31 07:40:59.448 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:40:59.450 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7302432553347,EndPoint:69.548629033402 2025-08-31 07:40:59.825 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:40:59.827 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_109_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:01.725 [Thd =1] Info Default DefectPicID:4100012b-013c-47fa-a48d-8a02170528f8 2025-08-31 07:41:04.289 [Thd =33] Info Default Stripes are collected for data processing！strip_no:110 2025-08-31 07:41:04.289 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:04.289 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:04.289 [Thd =34] Info Default Stripes are collected for data processing！strip_no:110 2025-08-31 07:41:04.289 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:04.289 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:B_SourceLightType 2025-08-31 07:41:04.289 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:A_SourceLightType 2025-08-31 07:41:04.290 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,B_SourceLightType 2025-08-31 07:41:04.290 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,A_SourceLightType 2025-08-31 07:41:04.380 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:04 2025-08-31 07:41:04.399 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:04 2025-08-31 07:41:04.453 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;110/265, 2025-08-31 07:41:04.462 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:04.512 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:04.779 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:04.782 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_110_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:04.861 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 111 2025-08-31 07:41:04.861 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 111 2025-08-31 07:41:04.861 [Thd =193] Info Default 开始扫描条带； [111/265] 2025-08-31 07:41:04.871 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:41:04.873 [Thd =202] Info Default ***row:111, vectorBeginX:-71.505, vectorBeginY:11.103, captureBeginX:-69.886, captureBeginY:11.103, captureEndX:69.393, captureEndY:11.103, vectorEndX:71.295, vectorEndY:11.103 2025-08-31 07:41:04.873 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:04.875 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8860350417409,EndPoint:-69.3928372469957 2025-08-31 07:41:05.279 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:05.282 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_110_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:09.708 [Thd =34] Info Default Stripes are collected for data processing！strip_no:111 2025-08-31 07:41:09.708 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:09.708 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:09.711 [Thd =33] Info Default Stripes are collected for data processing！strip_no:111 2025-08-31 07:41:09.711 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:09.711 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:A_SourceLightType 2025-08-31 07:41:09.711 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,A_SourceLightType 2025-08-31 07:41:09.711 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,B_SourceLightType 2025-08-31 07:41:09.711 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:B_SourceLightType 2025-08-31 07:41:09.873 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;111/265, 2025-08-31 07:41:09.882 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:09.929 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:09.935 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:09 2025-08-31 07:41:09.944 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:09 2025-08-31 07:41:10.159 [Thd =1] Info Default DefectPicID:4100012b-013c-47fa-a48d-8a02170528f8 2025-08-31 07:41:10.200 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:10.202 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_111_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:10.269 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 112 2025-08-31 07:41:10.269 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 112 2025-08-31 07:41:10.269 [Thd =261] Info Default 开始扫描条带； [112/265] 2025-08-31 07:41:10.278 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:41:10.281 [Thd =202] Info Default CaptureBeginX: 69.73028, CaptureBeginY:10.67467, CaptureEndX:-69.54859, CaptureEndY:10.67467, VectorBeginX:71.29517, VectorBeginY:10.67467, VectorEndX:-71.50508, VectorEndY:10.67467, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:41:10.281 [Thd =202] Info Default ***row:112, vectorBeginX:71.295, vectorBeginY:10.675, captureBeginX:69.730, captureBeginY:10.675, captureEndX:-69.549, captureEndY:10.675, vectorEndX:-71.505, vectorEndY:10.675 2025-08-31 07:41:10.281 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:10.283 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7302838437136,EndPoint:69.548588445023 2025-08-31 07:41:10.733 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:10.740 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_111_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:14.963 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:14 2025-08-31 07:41:14.981 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:14 2025-08-31 07:41:15.100 [Thd =34] Info Default Stripes are collected for data processing！strip_no:112 2025-08-31 07:41:15.100 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:15.100 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:15.101 [Thd =33] Info Default Stripes are collected for data processing！strip_no:112 2025-08-31 07:41:15.101 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:15.101 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:A_SourceLightType 2025-08-31 07:41:15.101 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:B_SourceLightType 2025-08-31 07:41:15.101 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,A_SourceLightType 2025-08-31 07:41:15.102 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,B_SourceLightType 2025-08-31 07:41:15.282 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;112/265, 2025-08-31 07:41:15.291 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:15.335 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:15.606 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:15.609 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_112_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:15.674 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 113 2025-08-31 07:41:15.674 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 113 2025-08-31 07:41:15.674 [Thd =338] Info Default 开始扫描条带； [113/265] 2025-08-31 07:41:15.692 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:41:15.694 [Thd =202] Info Default ***row:113, vectorBeginX:-71.505, vectorBeginY:10.246, captureBeginX:-69.886, captureBeginY:10.246, captureEndX:69.393, captureEndY:10.246, vectorEndX:71.295, vectorEndY:10.246 2025-08-31 07:41:15.695 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:15.697 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8859985427175,EndPoint:-69.3928737460191 2025-08-31 07:41:16.114 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:16.116 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_112_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:20.532 [Thd =34] Info Default Stripes are collected for data processing！strip_no:113 2025-08-31 07:41:20.532 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:20.532 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:20.532 [Thd =33] Info Default Stripes are collected for data processing！strip_no:113 2025-08-31 07:41:20.532 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:20.532 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:A_SourceLightType 2025-08-31 07:41:20.532 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:B_SourceLightType 2025-08-31 07:41:20.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,A_SourceLightType 2025-08-31 07:41:20.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,B_SourceLightType 2025-08-31 07:41:20.690 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;113/265, 2025-08-31 07:41:20.699 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:20.743 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:21.002 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:21.004 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_113_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:21.079 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 114 2025-08-31 07:41:21.079 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 114 2025-08-31 07:41:21.079 [Thd =320] Info Default 开始扫描条带； [114/265] 2025-08-31 07:41:21.088 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:41:21.091 [Thd =202] Info Default CaptureBeginX: 69.73029, CaptureBeginY:9.81806, CaptureEndX:-69.54858, CaptureEndY:9.81806, VectorBeginX:71.29518, VectorBeginY:9.81806, VectorEndX:-71.50507, VectorEndY:9.81806, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:41:21.091 [Thd =202] Info Default ***row:114, vectorBeginX:71.295, vectorBeginY:9.818, captureBeginX:69.730, captureBeginY:9.818, captureEndX:-69.549, captureEndY:9.818, vectorEndX:-71.505, vectorEndY:9.818 2025-08-31 07:41:21.092 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:21.094 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7302933041628,EndPoint:69.5485789845738 2025-08-31 07:41:21.517 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:21.520 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_113_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:21.529 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:21 2025-08-31 07:41:21.550 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:21 2025-08-31 07:41:25.911 [Thd =34] Info Default Stripes are collected for data processing！strip_no:114 2025-08-31 07:41:25.911 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:25.911 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:25.912 [Thd =33] Info Default Stripes are collected for data processing！strip_no:114 2025-08-31 07:41:25.912 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:25.912 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:A_SourceLightType 2025-08-31 07:41:25.912 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:B_SourceLightType 2025-08-31 07:41:25.912 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,A_SourceLightType 2025-08-31 07:41:25.912 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,B_SourceLightType 2025-08-31 07:41:26.066 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:26 2025-08-31 07:41:26.077 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:26 2025-08-31 07:41:26.091 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;114/265, 2025-08-31 07:41:26.112 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:26.153 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:26.391 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:26.408 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_114_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:26.490 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 115 2025-08-31 07:41:26.490 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 115 2025-08-31 07:41:26.490 [Thd =290] Info Default 开始扫描条带； [115/265] 2025-08-31 07:41:26.499 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:41:26.502 [Thd =202] Info Default ***row:115, vectorBeginX:-71.505, vectorBeginY:9.390, captureBeginX:-69.886, captureBeginY:9.390, captureEndX:69.393, captureEndY:9.390, vectorEndX:71.295, vectorEndY:9.390 2025-08-31 07:41:26.502 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:26.504 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8859993972097,EndPoint:-69.3928728915269 2025-08-31 07:41:26.922 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:26.924 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_114_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:31.327 [Thd =34] Info Default Stripes are collected for data processing！strip_no:115 2025-08-31 07:41:31.328 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:31.328 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:31.328 [Thd =33] Info Default Stripes are collected for data processing！strip_no:115 2025-08-31 07:41:31.328 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:31.328 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:A_SourceLightType 2025-08-31 07:41:31.328 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,A_SourceLightType 2025-08-31 07:41:31.328 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,B_SourceLightType 2025-08-31 07:41:31.329 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:B_SourceLightType 2025-08-31 07:41:31.502 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;115/265, 2025-08-31 07:41:31.511 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:31.548 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:31.810 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:31.813 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_115_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:31.891 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 116 2025-08-31 07:41:31.891 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 116 2025-08-31 07:41:31.891 [Thd =193] Info Default 开始扫描条带； [116/265] 2025-08-31 07:41:31.900 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:41:31.903 [Thd =202] Info Default CaptureBeginX: 69.73032, CaptureBeginY:8.96144, CaptureEndX:-69.54855, CaptureEndY:8.96144, VectorBeginX:71.29521, VectorBeginY:8.96144, VectorEndX:-71.50504, VectorEndY:8.96144, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:41:31.903 [Thd =202] Info Default ***row:116, vectorBeginX:71.295, vectorBeginY:8.961, captureBeginX:69.730, captureBeginY:8.961, captureEndX:-69.549, captureEndY:8.961, vectorEndX:-71.505, vectorEndY:8.961 2025-08-31 07:41:31.903 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:31.906 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7303244931277,EndPoint:69.548547795609 2025-08-31 07:41:32.119 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:32 2025-08-31 07:41:32.138 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:32 2025-08-31 07:41:32.321 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:32.324 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_115_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:36.670 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:36 2025-08-31 07:41:36.683 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:36 2025-08-31 07:41:36.725 [Thd =34] Info Default Stripes are collected for data processing！strip_no:116 2025-08-31 07:41:36.725 [Thd =33] Info Default Stripes are collected for data processing！strip_no:116 2025-08-31 07:41:36.726 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:36.726 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:36.726 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:36.726 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:B_SourceLightType 2025-08-31 07:41:36.726 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,B_SourceLightType 2025-08-31 07:41:36.727 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,A_SourceLightType 2025-08-31 07:41:36.727 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:A_SourceLightType 2025-08-31 07:41:36.898 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;116/265, 2025-08-31 07:41:36.915 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:37.005 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:37.219 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:37.221 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_116_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:37.341 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 117 2025-08-31 07:41:37.341 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 117 2025-08-31 07:41:37.341 [Thd =261] Info Default 开始扫描条带； [117/265] 2025-08-31 07:41:37.364 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:41:37.367 [Thd =202] Info Default ***row:117, vectorBeginX:-71.505, vectorBeginY:8.533, captureBeginX:-69.886, captureBeginY:8.533, captureEndX:69.393, captureEndY:8.533, vectorEndX:71.295, vectorEndY:8.533 2025-08-31 07:41:37.367 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:37.369 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8859566726003,EndPoint:-69.3929156161363 2025-08-31 07:41:37.719 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:37.721 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_116_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:42.193 [Thd =33] Info Default Stripes are collected for data processing！strip_no:117 2025-08-31 07:41:42.193 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:42.193 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:42.194 [Thd =34] Info Default Stripes are collected for data processing！strip_no:117 2025-08-31 07:41:42.194 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:42.194 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:B_SourceLightType 2025-08-31 07:41:42.194 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:A_SourceLightType 2025-08-31 07:41:42.194 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,B_SourceLightType 2025-08-31 07:41:42.194 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,A_SourceLightType 2025-08-31 07:41:42.366 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;117/265, 2025-08-31 07:41:42.375 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:42.415 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:42.680 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:42.683 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_117_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:42.756 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 118 2025-08-31 07:41:42.757 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 118 2025-08-31 07:41:42.757 [Thd =290] Info Default 开始扫描条带； [118/265] 2025-08-31 07:41:42.766 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:41:42.769 [Thd =202] Info Default CaptureBeginX: 69.73037, CaptureBeginY:8.10482, CaptureEndX:-69.54850, CaptureEndY:8.10482, VectorBeginX:71.29526, VectorBeginY:8.10482, VectorEndX:-71.50499, VectorEndY:8.10482, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:41:42.770 [Thd =202] Info Default ***row:118, vectorBeginX:71.295, vectorBeginY:8.105, captureBeginX:69.730, captureBeginY:8.105, captureEndX:-69.549, captureEndY:8.105, vectorEndX:-71.505, vectorEndY:8.105 2025-08-31 07:41:42.770 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:42.771 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.730367583948,EndPoint:69.5485047047887 2025-08-31 07:41:43.206 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:43.208 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_117_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:43.718 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:43 2025-08-31 07:41:43.738 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:43 2025-08-31 07:41:47.589 [Thd =33] Info Default Stripes are collected for data processing！strip_no:118 2025-08-31 07:41:47.589 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:47.589 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:47.590 [Thd =34] Info Default Stripes are collected for data processing！strip_no:118 2025-08-31 07:41:47.590 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:47.591 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:B_SourceLightType 2025-08-31 07:41:47.591 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:A_SourceLightType 2025-08-31 07:41:47.591 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,B_SourceLightType 2025-08-31 07:41:47.591 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,A_SourceLightType 2025-08-31 07:41:47.767 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:47 2025-08-31 07:41:47.770 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;118/265, 2025-08-31 07:41:47.793 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:47.793 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:47 2025-08-31 07:41:47.881 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:48.071 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:48.074 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_118_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:48.234 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 119 2025-08-31 07:41:48.234 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 119 2025-08-31 07:41:48.234 [Thd =302] Info Default 开始扫描条带； [119/265] 2025-08-31 07:41:48.263 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:41:48.265 [Thd =202] Info Default ***row:119, vectorBeginX:-71.505, vectorBeginY:7.677, captureBeginX:-69.886, captureBeginY:7.677, captureEndX:69.393, captureEndY:7.677, vectorEndX:71.295, vectorEndY:7.677 2025-08-31 07:41:48.266 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:48.266 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8859036330495,EndPoint:-69.3929686556871 2025-08-31 07:41:48.573 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:48.576 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_118_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:53.092 [Thd =33] Info Default Stripes are collected for data processing！strip_no:119 2025-08-31 07:41:53.092 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:53.092 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:53.092 [Thd =34] Info Default Stripes are collected for data processing！strip_no:119 2025-08-31 07:41:53.093 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:53.093 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:B_SourceLightType 2025-08-31 07:41:53.093 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:A_SourceLightType 2025-08-31 07:41:53.093 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,B_SourceLightType 2025-08-31 07:41:53.093 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,A_SourceLightType 2025-08-31 07:41:53.259 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;119/265, 2025-08-31 07:41:53.268 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:53.355 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:53.574 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:53.577 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_119_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:53.707 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 120 2025-08-31 07:41:53.707 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 120 2025-08-31 07:41:53.707 [Thd =302] Info Default 开始扫描条带； [120/265] 2025-08-31 07:41:53.716 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:41:53.719 [Thd =202] Info Default CaptureBeginX: 69.73039, CaptureBeginY:7.24820, CaptureEndX:-69.54848, CaptureEndY:7.24820, VectorBeginX:71.29528, VectorBeginY:7.24820, VectorEndX:-71.50497, VectorEndY:7.24820, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:41:53.719 [Thd =202] Info Default ***row:120, vectorBeginX:71.295, vectorBeginY:7.248, captureBeginX:69.730, captureBeginY:7.248, captureEndX:-69.548, captureEndY:7.248, vectorEndX:-71.505, vectorEndY:7.248 2025-08-31 07:41:53.719 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:53.721 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7303935849245,EndPoint:69.5484787038121 2025-08-31 07:41:53.817 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:53 2025-08-31 07:41:53.836 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:53 2025-08-31 07:41:54.077 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:54.080 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_119_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:58.539 [Thd =33] Info Default Stripes are collected for data processing！strip_no:120 2025-08-31 07:41:58.539 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:120,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:58.539 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:41:58.543 [Thd =34] Info Default Stripes are collected for data processing！strip_no:120 2025-08-31 07:41:58.543 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:120,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:41:58.543 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:120,source_light_Type:B_SourceLightType 2025-08-31 07:41:58.543 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:120,source_light_Type:A_SourceLightType 2025-08-31 07:41:58.543 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：120,B_SourceLightType 2025-08-31 07:41:58.543 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：120,A_SourceLightType 2025-08-31 07:41:58.724 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;120/265, 2025-08-31 07:41:58.734 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:41:58.774 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:41:58.872 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:41:58 2025-08-31 07:41:58.885 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:41:58 2025-08-31 07:41:59.034 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:41:59.036 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":120,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_120_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:41:59.110 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 121 2025-08-31 07:41:59.110 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 121 2025-08-31 07:41:59.110 [Thd =321] Info Default 开始扫描条带； [121/265] 2025-08-31 07:41:59.118 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:41:59.121 [Thd =202] Info Default ***row:121, vectorBeginX:-71.505, vectorBeginY:6.820, captureBeginX:-69.886, captureBeginY:6.820, captureEndX:69.393, captureEndY:6.820, vectorEndX:71.295, vectorEndY:6.820 2025-08-31 07:41:59.121 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:41:59.122 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8858973464284,EndPoint:-69.3929749423082 2025-08-31 07:41:59.535 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:41:59.537 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":120,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_120_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:03.953 [Thd =33] Info Default Stripes are collected for data processing！strip_no:121 2025-08-31 07:42:03.953 [Thd =34] Info Default Stripes are collected for data processing！strip_no:121 2025-08-31 07:42:03.954 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:121,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:03.954 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:03.954 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:121,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:03.954 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:121,source_light_Type:A_SourceLightType 2025-08-31 07:42:03.954 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:121,source_light_Type:B_SourceLightType 2025-08-31 07:42:03.955 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：121,A_SourceLightType 2025-08-31 07:42:03.955 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：121,B_SourceLightType 2025-08-31 07:42:04.112 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;121/265, 2025-08-31 07:42:04.121 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:04.220 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:04.438 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:04.441 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":121,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_121_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:04.559 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 122 2025-08-31 07:42:04.559 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 122 2025-08-31 07:42:04.559 [Thd =340] Info Default 开始扫描条带； [122/265] 2025-08-31 07:42:04.568 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:42:04.571 [Thd =202] Info Default CaptureBeginX: 69.73044, CaptureBeginY:6.39159, CaptureEndX:-69.54844, CaptureEndY:6.39159, VectorBeginX:71.29533, VectorBeginY:6.39159, VectorEndX:-71.50492, VectorEndY:6.39159, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:42:04.571 [Thd =202] Info Default ***row:122, vectorBeginX:71.295, vectorBeginY:6.392, captureBeginX:69.730, captureBeginY:6.392, captureEndX:-69.548, captureEndY:6.392, vectorEndX:-71.505, vectorEndY:6.392 2025-08-31 07:42:04.572 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:04.574 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.73043673678,EndPoint:69.5484355519566 2025-08-31 07:42:04.917 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:04 2025-08-31 07:42:04.928 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:04 2025-08-31 07:42:04.945 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:04.948 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":121,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_121_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:08.964 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:08 2025-08-31 07:42:08.984 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:08 2025-08-31 07:42:09.393 [Thd =34] Info Default Stripes are collected for data processing！strip_no:122 2025-08-31 07:42:09.393 [Thd =33] Info Default Stripes are collected for data processing！strip_no:122 2025-08-31 07:42:09.393 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:122,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:09.394 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:09.394 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:122,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:09.394 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:122,source_light_Type:B_SourceLightType 2025-08-31 07:42:09.395 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:122,source_light_Type:A_SourceLightType 2025-08-31 07:42:09.395 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：122,B_SourceLightType 2025-08-31 07:42:09.395 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：122,A_SourceLightType 2025-08-31 07:42:09.568 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;122/265, 2025-08-31 07:42:09.577 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:09.663 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:09.877 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:09.880 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":122,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_122_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:10.006 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 123 2025-08-31 07:42:10.006 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 123 2025-08-31 07:42:10.006 [Thd =299] Info Default 开始扫描条带； [123/265] 2025-08-31 07:42:10.015 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:42:10.018 [Thd =202] Info Default ***row:123, vectorBeginX:-71.505, vectorBeginY:5.963, captureBeginX:-69.886, captureBeginY:5.963, captureEndX:69.393, captureEndY:5.963, vectorEndX:71.295, vectorEndY:5.963 2025-08-31 07:42:10.018 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:10.020 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8858291091237,EndPoint:-69.3930431796129 2025-08-31 07:42:10.375 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:10.377 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":122,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_122_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:14.839 [Thd =34] Info Default Stripes are collected for data processing！strip_no:123 2025-08-31 07:42:14.840 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:123,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:14.840 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:14.840 [Thd =33] Info Default Stripes are collected for data processing！strip_no:123 2025-08-31 07:42:14.840 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:123,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:14.840 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:123,source_light_Type:A_SourceLightType 2025-08-31 07:42:14.840 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:123,source_light_Type:B_SourceLightType 2025-08-31 07:42:14.840 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：123,A_SourceLightType 2025-08-31 07:42:14.841 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：123,B_SourceLightType 2025-08-31 07:42:15.020 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;123/265, 2025-08-31 07:42:15.029 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:15.139 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:15.330 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:15.333 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":123,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_123_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:15.493 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 124 2025-08-31 07:42:15.493 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 124 2025-08-31 07:42:15.493 [Thd =290] Info Default 开始扫描条带； [124/265] 2025-08-31 07:42:15.502 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:42:15.505 [Thd =202] Info Default CaptureBeginX: 69.73051, CaptureBeginY:5.53497, CaptureEndX:-69.54836, CaptureEndY:5.53497, VectorBeginX:71.29540, VectorBeginY:5.53497, VectorEndX:-71.50485, VectorEndY:5.53497, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:42:15.505 [Thd =202] Info Default ***row:124, vectorBeginX:71.295, vectorBeginY:5.535, captureBeginX:69.731, captureBeginY:5.535, captureEndX:-69.548, captureEndY:5.535, vectorEndX:-71.505, vectorEndY:5.535 2025-08-31 07:42:15.505 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:15.508 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7305080868776,EndPoint:69.548364201859 2025-08-31 07:42:15.528 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:15 2025-08-31 07:42:15.539 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:15 2025-08-31 07:42:15.970 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:15.973 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":123,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_123_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:20.336 [Thd =34] Info Default Stripes are collected for data processing！strip_no:124 2025-08-31 07:42:20.337 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:124,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:20.337 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:20.337 [Thd =33] Info Default Stripes are collected for data processing！strip_no:124 2025-08-31 07:42:20.337 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:124,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:20.337 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:124,source_light_Type:A_SourceLightType 2025-08-31 07:42:20.337 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:124,source_light_Type:B_SourceLightType 2025-08-31 07:42:20.337 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：124,A_SourceLightType 2025-08-31 07:42:20.337 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：124,B_SourceLightType 2025-08-31 07:42:20.512 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;124/265, 2025-08-31 07:42:20.522 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:20.558 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:20.581 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:20 2025-08-31 07:42:20.664 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:20 2025-08-31 07:42:20.816 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:20.818 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":124,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_124_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:20.901 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 125 2025-08-31 07:42:20.901 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 125 2025-08-31 07:42:20.901 [Thd =215] Info Default 开始扫描条带； [125/265] 2025-08-31 07:42:20.917 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:42:20.919 [Thd =202] Info Default ***row:125, vectorBeginX:-71.505, vectorBeginY:5.107, captureBeginX:-69.886, captureBeginY:5.107, captureEndX:69.393, captureEndY:5.107, vectorEndX:71.295, vectorEndY:5.107 2025-08-31 07:42:20.919 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:20.921 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8857993850027,EndPoint:-69.393072903734 2025-08-31 07:42:21.319 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:21.322 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":124,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_124_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:25.747 [Thd =34] Info Default Stripes are collected for data processing！strip_no:125 2025-08-31 07:42:25.747 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:125,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:25.747 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:25.748 [Thd =33] Info Default Stripes are collected for data processing！strip_no:125 2025-08-31 07:42:25.748 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:125,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:25.748 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:125,source_light_Type:A_SourceLightType 2025-08-31 07:42:25.748 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:125,source_light_Type:B_SourceLightType 2025-08-31 07:42:25.748 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：125,A_SourceLightType 2025-08-31 07:42:25.748 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：125,B_SourceLightType 2025-08-31 07:42:25.918 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;125/265, 2025-08-31 07:42:25.927 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:26.012 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:26.238 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:26.240 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":125,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_125_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:26.361 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 126 2025-08-31 07:42:26.361 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 126 2025-08-31 07:42:26.361 [Thd =340] Info Default 开始扫描条带； [126/265] 2025-08-31 07:42:26.370 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:42:26.373 [Thd =202] Info Default CaptureBeginX: 69.73049, CaptureBeginY:4.67835, CaptureEndX:-69.54838, CaptureEndY:4.67835, VectorBeginX:71.29538, VectorBeginY:4.67835, VectorEndX:-71.50487, VectorEndY:4.67835, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:42:26.373 [Thd =202] Info Default ***row:126, vectorBeginX:71.295, vectorBeginY:4.678, captureBeginX:69.730, captureBeginY:4.678, captureEndX:-69.548, captureEndY:4.678, vectorEndX:-71.505, vectorEndY:4.678 2025-08-31 07:42:26.373 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:26.374 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.730490264612,EndPoint:69.5483820241246 2025-08-31 07:42:26.689 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:26 2025-08-31 07:42:26.700 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:26 2025-08-31 07:42:26.756 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:26.759 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":125,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_125_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:31.207 [Thd =34] Info Default Stripes are collected for data processing！strip_no:126 2025-08-31 07:42:31.207 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:126,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:31.207 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:31.207 [Thd =33] Info Default Stripes are collected for data processing！strip_no:126 2025-08-31 07:42:31.207 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:126,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:31.207 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:126,source_light_Type:A_SourceLightType 2025-08-31 07:42:31.207 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：126,A_SourceLightType 2025-08-31 07:42:31.207 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：126,B_SourceLightType 2025-08-31 07:42:31.208 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:126,source_light_Type:B_SourceLightType 2025-08-31 07:42:31.225 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:31 2025-08-31 07:42:31.251 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:31 2025-08-31 07:42:31.376 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;126/265, 2025-08-31 07:42:31.386 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:31.475 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:31.688 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:31.690 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":126,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_126_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:31.815 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 127 2025-08-31 07:42:31.815 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 127 2025-08-31 07:42:31.815 [Thd =302] Info Default 开始扫描条带； [127/265] 2025-08-31 07:42:31.824 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:42:31.826 [Thd =202] Info Default ***row:127, vectorBeginX:-71.505, vectorBeginY:4.250, captureBeginX:-69.886, captureBeginY:4.250, captureEndX:69.393, captureEndY:4.250, vectorEndX:71.295, vectorEndY:4.250 2025-08-31 07:42:31.827 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:31.828 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8857914504323,EndPoint:-69.3930808383043 2025-08-31 07:42:32.206 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:32.208 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":126,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_126_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:36.648 [Thd =34] Info Default Stripes are collected for data processing！strip_no:127 2025-08-31 07:42:36.648 [Thd =33] Info Default Stripes are collected for data processing！strip_no:127 2025-08-31 07:42:36.648 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:127,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:36.648 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:36.648 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:127,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:36.648 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:127,source_light_Type:B_SourceLightType 2025-08-31 07:42:36.649 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：127,B_SourceLightType 2025-08-31 07:42:36.649 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：127,A_SourceLightType 2025-08-31 07:42:36.649 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:127,source_light_Type:A_SourceLightType 2025-08-31 07:42:36.770 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:36 2025-08-31 07:42:36.792 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:36 2025-08-31 07:42:36.817 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;127/265, 2025-08-31 07:42:36.826 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:36.924 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:37.133 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:37.135 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":127,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_127_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:37.282 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 128 2025-08-31 07:42:37.282 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 128 2025-08-31 07:42:37.282 [Thd =262] Info Default 开始扫描条带； [128/265] 2025-08-31 07:42:37.290 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:42:37.293 [Thd =202] Info Default CaptureBeginX: 69.73052, CaptureBeginY:3.82174, CaptureEndX:-69.54836, CaptureEndY:3.82174, VectorBeginX:71.29540, VectorBeginY:3.82174, VectorEndX:-71.50485, VectorEndY:3.82174, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:42:37.294 [Thd =202] Info Default ***row:128, vectorBeginX:71.295, vectorBeginY:3.822, captureBeginX:69.731, captureBeginY:3.822, captureEndX:-69.548, captureEndY:3.822, vectorEndX:-71.505, vectorEndY:3.822 2025-08-31 07:42:37.294 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:37.295 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7305154721316,EndPoint:69.5483568166051 2025-08-31 07:42:37.634 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:37.637 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":127,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_127_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:42.125 [Thd =34] Info Default Stripes are collected for data processing！strip_no:128 2025-08-31 07:42:42.125 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:128,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:42.126 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:42.126 [Thd =33] Info Default Stripes are collected for data processing！strip_no:128 2025-08-31 07:42:42.126 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:128,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:42.126 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:128,source_light_Type:A_SourceLightType 2025-08-31 07:42:42.126 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:128,source_light_Type:B_SourceLightType 2025-08-31 07:42:42.127 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：128,A_SourceLightType 2025-08-31 07:42:42.127 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：128,B_SourceLightType 2025-08-31 07:42:42.286 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;128/265, 2025-08-31 07:42:42.295 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:42.325 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:42 2025-08-31 07:42:42.389 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:42.408 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:42 2025-08-31 07:42:42.603 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:42.606 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":128,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_128_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:42.743 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 129 2025-08-31 07:42:42.743 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 129 2025-08-31 07:42:42.743 [Thd =193] Info Default 开始扫描条带； [129/265] 2025-08-31 07:42:42.752 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:42:42.755 [Thd =202] Info Default ***row:129, vectorBeginX:-71.505, vectorBeginY:3.393, captureBeginX:-69.886, captureBeginY:3.393, captureEndX:69.393, captureEndY:3.393, vectorEndX:71.295, vectorEndY:3.393 2025-08-31 07:42:42.755 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:42.757 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8857706374441,EndPoint:-69.3931016512926 2025-08-31 07:42:43.104 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:43.107 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":128,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_128_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:47.577 [Thd =34] Info Default Stripes are collected for data processing！strip_no:129 2025-08-31 07:42:47.577 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:129,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:47.577 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:47.578 [Thd =33] Info Default Stripes are collected for data processing！strip_no:129 2025-08-31 07:42:47.578 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:129,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:47.578 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:129,source_light_Type:A_SourceLightType 2025-08-31 07:42:47.578 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:129,source_light_Type:B_SourceLightType 2025-08-31 07:42:47.578 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：129,A_SourceLightType 2025-08-31 07:42:47.579 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：129,B_SourceLightType 2025-08-31 07:42:47.754 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;129/265, 2025-08-31 07:42:47.762 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:47.834 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:48.058 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:48.060 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":129,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_129_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:48.186 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 130 2025-08-31 07:42:48.186 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 130 2025-08-31 07:42:48.186 [Thd =340] Info Default 开始扫描条带； [130/265] 2025-08-31 07:42:48.195 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:42:48.198 [Thd =202] Info Default CaptureBeginX: 69.73056, CaptureBeginY:2.96512, CaptureEndX:-69.54831, CaptureEndY:2.96512, VectorBeginX:71.29545, VectorBeginY:2.96512, VectorEndX:-71.50480, VectorEndY:2.96512, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:42:48.198 [Thd =202] Info Default ***row:130, vectorBeginX:71.295, vectorBeginY:2.965, captureBeginX:69.731, captureBeginY:2.965, captureEndX:-69.548, captureEndY:2.965, vectorEndX:-71.505, vectorEndY:2.965 2025-08-31 07:42:48.198 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:48.200 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7305577084597,EndPoint:69.548314580277 2025-08-31 07:42:48.457 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:48 2025-08-31 07:42:48.470 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:48 2025-08-31 07:42:48.576 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:48.578 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":129,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_129_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:52.997 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:52 2025-08-31 07:42:53.017 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:53 2025-08-31 07:42:53.021 [Thd =33] Info Default Stripes are collected for data processing！strip_no:130 2025-08-31 07:42:53.021 [Thd =34] Info Default Stripes are collected for data processing！strip_no:130 2025-08-31 07:42:53.021 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:130,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:53.021 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:53.021 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:130,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:53.021 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:130,source_light_Type:A_SourceLightType 2025-08-31 07:42:53.021 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：130,A_SourceLightType 2025-08-31 07:42:53.021 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：130,B_SourceLightType 2025-08-31 07:42:53.021 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:130,source_light_Type:B_SourceLightType 2025-08-31 07:42:53.198 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;130/265, 2025-08-31 07:42:53.221 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:53.256 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:53.499 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:53.501 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":130,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_130_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:53.592 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 131 2025-08-31 07:42:53.592 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 131 2025-08-31 07:42:53.592 [Thd =302] Info Default 开始扫描条带； [131/265] 2025-08-31 07:42:53.607 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:42:53.610 [Thd =202] Info Default ***row:131, vectorBeginX:-71.505, vectorBeginY:2.537, captureBeginX:-69.886, captureBeginY:2.537, captureEndX:69.393, captureEndY:2.537, vectorEndX:71.295, vectorEndY:2.537 2025-08-31 07:42:53.610 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:53.612 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8857047194753,EndPoint:-69.3931675692613 2025-08-31 07:42:54.016 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:54.019 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":130,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_130_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:58.445 [Thd =33] Info Default Stripes are collected for data processing！strip_no:131 2025-08-31 07:42:58.445 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:131,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:58.445 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:42:58.446 [Thd =34] Info Default Stripes are collected for data processing！strip_no:131 2025-08-31 07:42:58.446 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:131,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:42:58.446 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:131,source_light_Type:B_SourceLightType 2025-08-31 07:42:58.446 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:131,source_light_Type:A_SourceLightType 2025-08-31 07:42:58.446 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：131,B_SourceLightType 2025-08-31 07:42:58.447 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：131,A_SourceLightType 2025-08-31 07:42:58.605 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;131/265, 2025-08-31 07:42:58.613 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:42:58.700 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:42:58.929 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:42:58.931 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":131,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_131_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:42:59.039 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:42:59 2025-08-31 07:42:59.041 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 132 2025-08-31 07:42:59.041 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 132 2025-08-31 07:42:59.041 [Thd =290] Info Default 开始扫描条带； [132/265] 2025-08-31 07:42:59.050 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:42:59.053 [Thd =202] Info Default CaptureBeginX: 69.73058, CaptureBeginY:2.10849, CaptureEndX:-69.54829, CaptureEndY:2.10849, VectorBeginX:71.29547, VectorBeginY:2.10849, VectorEndX:-71.50478, VectorEndY:2.10849, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:42:59.053 [Thd =202] Info Default ***row:132, vectorBeginX:71.295, vectorBeginY:2.108, captureBeginX:69.731, captureBeginY:2.108, captureEndX:-69.548, captureEndY:2.108, vectorEndX:-71.505, vectorEndY:2.108 2025-08-31 07:42:59.053 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:42:59.054 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7305805966433,EndPoint:69.5482916920934 2025-08-31 07:42:59.059 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:42:59 2025-08-31 07:42:59.427 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:42:59.429 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":131,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_131_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:03.590 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:03 2025-08-31 07:43:03.625 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:03 2025-08-31 07:43:03.874 [Thd =33] Info Default Stripes are collected for data processing！strip_no:132 2025-08-31 07:43:03.874 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:132,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:03.874 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:03.878 [Thd =34] Info Default Stripes are collected for data processing！strip_no:132 2025-08-31 07:43:03.878 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:132,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:03.878 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:132,source_light_Type:B_SourceLightType 2025-08-31 07:43:03.879 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:132,source_light_Type:A_SourceLightType 2025-08-31 07:43:03.879 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：132,B_SourceLightType 2025-08-31 07:43:03.879 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：132,A_SourceLightType 2025-08-31 07:43:04.043 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;132/265, 2025-08-31 07:43:04.065 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:04.149 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:04.377 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:04.380 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":132,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_132_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:04.496 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 133 2025-08-31 07:43:04.496 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 133 2025-08-31 07:43:04.496 [Thd =290] Info Default 开始扫描条带； [133/265] 2025-08-31 07:43:04.522 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:43:04.525 [Thd =202] Info Default ***row:133, vectorBeginX:-71.505, vectorBeginY:1.680, captureBeginX:-69.886, captureBeginY:1.680, captureEndX:69.393, captureEndY:1.680, vectorEndX:71.295, vectorEndY:1.680 2025-08-31 07:43:04.525 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:04.527 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8856990432058,EndPoint:-69.3931732455309 2025-08-31 07:43:04.873 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:04.876 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":132,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_132_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:09.361 [Thd =33] Info Default Stripes are collected for data processing！strip_no:133 2025-08-31 07:43:09.361 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:133,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:09.361 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:09.362 [Thd =34] Info Default Stripes are collected for data processing！strip_no:133 2025-08-31 07:43:09.362 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:133,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:09.362 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:133,source_light_Type:B_SourceLightType 2025-08-31 07:43:09.362 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:133,source_light_Type:A_SourceLightType 2025-08-31 07:43:09.362 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：133,B_SourceLightType 2025-08-31 07:43:09.362 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：133,A_SourceLightType 2025-08-31 07:43:09.526 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;133/265, 2025-08-31 07:43:09.536 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:09.631 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:09.843 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:09.845 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":133,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_133_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:09.968 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 134 2025-08-31 07:43:09.968 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 134 2025-08-31 07:43:09.968 [Thd =265] Info Default 开始扫描条带； [134/265] 2025-08-31 07:43:09.977 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:43:09.980 [Thd =202] Info Default CaptureBeginX: 69.73060, CaptureBeginY:1.25187, CaptureEndX:-69.54827, CaptureEndY:1.25187, VectorBeginX:71.29549, VectorBeginY:1.25187, VectorEndX:-71.50476, VectorEndY:1.25187, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:43:09.980 [Thd =202] Info Default ***row:134, vectorBeginX:71.295, vectorBeginY:1.252, captureBeginX:69.731, captureBeginY:1.252, captureEndX:-69.548, captureEndY:1.252, vectorEndX:-71.505, vectorEndY:1.252 2025-08-31 07:43:09.980 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:09.981 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7306009823855,EndPoint:69.5482713063512 2025-08-31 07:43:10.164 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:10 2025-08-31 07:43:10.196 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:10 2025-08-31 07:43:10.361 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:10.364 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":133,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_133_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:14.710 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:14 2025-08-31 07:43:14.730 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:14 2025-08-31 07:43:14.800 [Thd =34] Info Default Stripes are collected for data processing！strip_no:134 2025-08-31 07:43:14.800 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:134,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:14.800 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:14.800 [Thd =33] Info Default Stripes are collected for data processing！strip_no:134 2025-08-31 07:43:14.800 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:134,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:14.800 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:134,source_light_Type:A_SourceLightType 2025-08-31 07:43:14.801 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:134,source_light_Type:B_SourceLightType 2025-08-31 07:43:14.801 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：134,A_SourceLightType 2025-08-31 07:43:14.801 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：134,B_SourceLightType 2025-08-31 07:43:14.970 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;134/265, 2025-08-31 07:43:14.979 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:15.105 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:15.285 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:15.287 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":134,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_134_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:15.442 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 135 2025-08-31 07:43:15.442 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 135 2025-08-31 07:43:15.442 [Thd =265] Info Default 开始扫描条带； [135/265] 2025-08-31 07:43:15.450 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:43:15.453 [Thd =202] Info Default ***row:135, vectorBeginX:-71.505, vectorBeginY:0.824, captureBeginX:-69.886, captureBeginY:0.824, captureEndX:69.393, captureEndY:0.824, vectorEndX:71.296, vectorEndY:0.824 2025-08-31 07:43:15.453 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:15.454 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8856738356862,EndPoint:-69.3931984530504 2025-08-31 07:43:15.802 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:15.804 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":134,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_134_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:20.296 [Thd =33] Info Default Stripes are collected for data processing！strip_no:135 2025-08-31 07:43:20.296 [Thd =34] Info Default Stripes are collected for data processing！strip_no:135 2025-08-31 07:43:20.296 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:135,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:20.296 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:20.297 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:135,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:20.297 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:135,source_light_Type:A_SourceLightType 2025-08-31 07:43:20.297 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：135,A_SourceLightType 2025-08-31 07:43:20.297 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：135,B_SourceLightType 2025-08-31 07:43:20.297 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:135,source_light_Type:B_SourceLightType 2025-08-31 07:43:20.455 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;135/265, 2025-08-31 07:43:20.464 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:20.580 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:20.781 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:20.783 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":135,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_135_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:20.916 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 136 2025-08-31 07:43:20.916 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 136 2025-08-31 07:43:20.916 [Thd =321] Info Default 开始扫描条带； [136/265] 2025-08-31 07:43:20.925 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:43:20.928 [Thd =202] Info Default CaptureBeginX: 69.73061, CaptureBeginY:0.39525, CaptureEndX:-69.54826, CaptureEndY:0.39525, VectorBeginX:71.29550, VectorBeginY:0.39525, VectorEndX:-71.50475, VectorEndY:0.39525, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:43:20.928 [Thd =202] Info Default ***row:136, vectorBeginX:71.295, vectorBeginY:0.395, captureBeginX:69.731, captureBeginY:0.395, captureEndX:-69.548, captureEndY:0.395, vectorEndX:-71.505, vectorEndY:0.395 2025-08-31 07:43:20.928 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:20.930 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7306099545534,EndPoint:69.5482623341832 2025-08-31 07:43:21.300 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:21.302 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":135,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_135_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:21.795 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:21 2025-08-31 07:43:21.815 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:21 2025-08-31 07:43:25.748 [Thd =34] Info Default Stripes are collected for data processing！strip_no:136 2025-08-31 07:43:25.748 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:136,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:25.748 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:25.748 [Thd =33] Info Default Stripes are collected for data processing！strip_no:136 2025-08-31 07:43:25.749 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:136,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:25.749 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:136,source_light_Type:A_SourceLightType 2025-08-31 07:43:25.749 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:136,source_light_Type:B_SourceLightType 2025-08-31 07:43:25.749 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：136,A_SourceLightType 2025-08-31 07:43:25.749 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：136,B_SourceLightType 2025-08-31 07:43:25.936 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;136/265, 2025-08-31 07:43:25.946 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:26.072 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:26.242 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:26.245 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":136,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_136_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:26.344 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:26 2025-08-31 07:43:26.354 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:26 2025-08-31 07:43:26.409 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 137 2025-08-31 07:43:26.409 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 137 2025-08-31 07:43:26.409 [Thd =290] Info Default 开始扫描条带； [137/265] 2025-08-31 07:43:26.418 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:43:26.421 [Thd =202] Info Default ***row:137, vectorBeginX:-71.505, vectorBeginY:-0.033, captureBeginX:-69.886, captureBeginY:-0.033, captureEndX:69.393, captureEndY:-0.033, vectorEndX:71.296, vectorEndY:-0.033 2025-08-31 07:43:26.421 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:26.423 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8856608962331,EndPoint:-69.3932113925035 2025-08-31 07:43:26.734 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:26.737 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":136,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_136_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:31.260 [Thd =33] Info Default Stripes are collected for data processing！strip_no:137 2025-08-31 07:43:31.260 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:137,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:31.260 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:31.266 [Thd =34] Info Default Stripes are collected for data processing！strip_no:137 2025-08-31 07:43:31.266 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:137,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:31.266 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:137,source_light_Type:B_SourceLightType 2025-08-31 07:43:31.266 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:137,source_light_Type:A_SourceLightType 2025-08-31 07:43:31.266 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：137,B_SourceLightType 2025-08-31 07:43:31.266 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：137,A_SourceLightType 2025-08-31 07:43:31.373 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:31 2025-08-31 07:43:31.386 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:31 2025-08-31 07:43:31.426 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;137/265, 2025-08-31 07:43:31.436 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:31.509 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:31.753 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:31.755 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":137,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_137_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:31.845 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 138 2025-08-31 07:43:31.845 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 138 2025-08-31 07:43:31.845 [Thd =311] Info Default 开始扫描条带； [138/265] 2025-08-31 07:43:31.854 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:43:31.857 [Thd =202] Info Default CaptureBeginX: 69.73063, CaptureBeginY:-0.46137, CaptureEndX:-69.54824, CaptureEndY:-0.46137, VectorBeginX:71.29552, VectorBeginY:-0.46137, VectorEndX:-71.50473, VectorEndY:-0.46137, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:43:31.857 [Thd =202] Info Default ***row:138, vectorBeginX:71.296, vectorBeginY:-0.461, captureBeginX:69.731, captureBeginY:-0.461, captureEndX:-69.548, captureEndY:-0.461, vectorEndX:-71.505, vectorEndY:-0.461 2025-08-31 07:43:31.857 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:31.860 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7306302792605,EndPoint:69.5482420094762 2025-08-31 07:43:32.258 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:32.261 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":137,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_137_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:36.414 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:36 2025-08-31 07:43:36.436 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:36 2025-08-31 07:43:36.695 [Thd =33] Info Default Stripes are collected for data processing！strip_no:138 2025-08-31 07:43:36.696 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:138,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:36.696 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:36.697 [Thd =34] Info Default Stripes are collected for data processing！strip_no:138 2025-08-31 07:43:36.697 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:138,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:36.697 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:138,source_light_Type:B_SourceLightType 2025-08-31 07:43:36.697 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:138,source_light_Type:A_SourceLightType 2025-08-31 07:43:36.697 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：138,B_SourceLightType 2025-08-31 07:43:36.697 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：138,A_SourceLightType 2025-08-31 07:43:36.890 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;138/265, 2025-08-31 07:43:36.900 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:36.940 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:37.197 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:37.199 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":138,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_138_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:37.289 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 139 2025-08-31 07:43:37.289 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 139 2025-08-31 07:43:37.289 [Thd =321] Info Default 开始扫描条带； [139/265] 2025-08-31 07:43:37.300 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:43:37.303 [Thd =202] Info Default ***row:139, vectorBeginX:-71.505, vectorBeginY:-0.890, captureBeginX:-69.886, captureBeginY:-0.890, captureEndX:69.393, captureEndY:-0.890, vectorEndX:71.296, vectorEndY:-0.890 2025-08-31 07:43:37.303 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:37.305 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8856481398855,EndPoint:-69.3932241488512 2025-08-31 07:43:37.713 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:37.715 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":138,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_138_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:42.127 [Thd =34] Info Default Stripes are collected for data processing！strip_no:139 2025-08-31 07:43:42.127 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:139,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:42.127 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:42.128 [Thd =33] Info Default Stripes are collected for data processing！strip_no:139 2025-08-31 07:43:42.128 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:139,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:42.128 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:139,source_light_Type:A_SourceLightType 2025-08-31 07:43:42.128 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:139,source_light_Type:B_SourceLightType 2025-08-31 07:43:42.128 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：139,A_SourceLightType 2025-08-31 07:43:42.128 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：139,B_SourceLightType 2025-08-31 07:43:42.304 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;139/265, 2025-08-31 07:43:42.313 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:42.351 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:42.485 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:42 2025-08-31 07:43:42.507 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:42 2025-08-31 07:43:42.608 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:42.611 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":139,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_139_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:42.699 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 140 2025-08-31 07:43:42.699 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 140 2025-08-31 07:43:42.699 [Thd =290] Info Default 开始扫描条带； [140/265] 2025-08-31 07:43:42.708 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:43:42.711 [Thd =202] Info Default CaptureBeginX: 69.73067, CaptureBeginY:-1.31799, CaptureEndX:-69.54821, CaptureEndY:-1.31799, VectorBeginX:71.29556, VectorBeginY:-1.31799, VectorEndX:-71.50469, VectorEndY:-1.31799, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:43:42.711 [Thd =202] Info Default ***row:140, vectorBeginX:71.296, vectorBeginY:-1.318, captureBeginX:69.731, captureBeginY:-1.318, captureEndX:-69.548, captureEndY:-1.318, vectorEndX:-71.505, vectorEndY:-1.318 2025-08-31 07:43:42.711 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:42.713 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7306665951784,EndPoint:69.5482056935582 2025-08-31 07:43:43.117 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:43.119 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":139,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_139_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:47.532 [Thd =34] Info Default Stripes are collected for data processing！strip_no:140 2025-08-31 07:43:47.532 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:140,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:47.532 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:47.533 [Thd =33] Info Default Stripes are collected for data processing！strip_no:140 2025-08-31 07:43:47.533 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:140,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:47.533 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:140,source_light_Type:A_SourceLightType 2025-08-31 07:43:47.533 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:140,source_light_Type:B_SourceLightType 2025-08-31 07:43:47.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：140,A_SourceLightType 2025-08-31 07:43:47.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：140,B_SourceLightType 2025-08-31 07:43:47.710 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;140/265, 2025-08-31 07:43:47.719 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:47.831 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:48.016 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:48.018 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":140,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_140_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:48.041 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:48 2025-08-31 07:43:48.062 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:48 2025-08-31 07:43:48.171 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 141 2025-08-31 07:43:48.171 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 141 2025-08-31 07:43:48.171 [Thd =265] Info Default 开始扫描条带； [141/265] 2025-08-31 07:43:48.189 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:43:48.192 [Thd =202] Info Default ***row:141, vectorBeginX:-71.505, vectorBeginY:-1.746, captureBeginX:-69.886, captureBeginY:-1.746, captureEndX:69.393, captureEndY:-1.746, vectorEndX:71.296, vectorEndY:-1.746 2025-08-31 07:43:48.192 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:48.193 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8856122512136,EndPoint:-69.393260037523 2025-08-31 07:43:48.512 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:48.515 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":140,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_140_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:53.021 [Thd =34] Info Default Stripes are collected for data processing！strip_no:141 2025-08-31 07:43:53.021 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:141,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:53.021 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:53.021 [Thd =33] Info Default Stripes are collected for data processing！strip_no:141 2025-08-31 07:43:53.021 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:141,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:53.022 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:141,source_light_Type:A_SourceLightType 2025-08-31 07:43:53.022 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:141,source_light_Type:B_SourceLightType 2025-08-31 07:43:53.022 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：141,A_SourceLightType 2025-08-31 07:43:53.022 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：141,B_SourceLightType 2025-08-31 07:43:53.191 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;141/265, 2025-08-31 07:43:53.200 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:53.290 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:53.508 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:53.510 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":141,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_141_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:53.637 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 142 2025-08-31 07:43:53.637 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 142 2025-08-31 07:43:53.637 [Thd =262] Info Default 开始扫描条带； [142/265] 2025-08-31 07:43:53.646 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:43:53.649 [Thd =202] Info Default CaptureBeginX: 69.73070, CaptureBeginY:-2.17461, CaptureEndX:-69.54818, CaptureEndY:-2.17461, VectorBeginX:71.29559, VectorBeginY:-2.17461, VectorEndX:-71.50467, VectorEndY:-2.17461, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:43:53.649 [Thd =202] Info Default ***row:142, vectorBeginX:71.296, vectorBeginY:-2.175, captureBeginX:69.731, captureBeginY:-2.175, captureEndX:-69.548, captureEndY:-2.175, vectorEndX:-71.505, vectorEndY:-2.175 2025-08-31 07:43:53.650 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:53.651 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7306961972292,EndPoint:69.5481760915074 2025-08-31 07:43:54.022 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:54.024 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":141,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_141_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:54.089 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:54 2025-08-31 07:43:54.109 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:54 2025-08-31 07:43:58.139 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:43:58 2025-08-31 07:43:58.159 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:43:58 2025-08-31 07:43:58.486 [Thd =33] Info Default Stripes are collected for data processing！strip_no:142 2025-08-31 07:43:58.486 [Thd =34] Info Default Stripes are collected for data processing！strip_no:142 2025-08-31 07:43:58.486 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:142,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:58.486 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:43:58.486 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:142,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:43:58.487 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:142,source_light_Type:A_SourceLightType 2025-08-31 07:43:58.487 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:142,source_light_Type:B_SourceLightType 2025-08-31 07:43:58.487 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：142,A_SourceLightType 2025-08-31 07:43:58.487 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：142,B_SourceLightType 2025-08-31 07:43:58.657 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;142/265, 2025-08-31 07:43:58.666 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:43:58.741 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:43:58.973 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:43:58.976 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":142,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_142_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:43:59.078 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 143 2025-08-31 07:43:59.078 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 143 2025-08-31 07:43:59.078 [Thd =302] Info Default 开始扫描条带； [143/265] 2025-08-31 07:43:59.087 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:43:59.090 [Thd =202] Info Default ***row:143, vectorBeginX:-71.505, vectorBeginY:-2.603, captureBeginX:-69.886, captureBeginY:-2.603, captureEndX:69.393, captureEndY:-2.603, vectorEndX:71.296, vectorEndY:-2.603 2025-08-31 07:43:59.090 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:43:59.093 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8855758742605,EndPoint:-69.3932964144762 2025-08-31 07:43:59.494 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:43:59.497 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":142,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_142_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:03.920 [Thd =34] Info Default Stripes are collected for data processing！strip_no:143 2025-08-31 07:44:03.920 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:143,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:03.920 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:03.921 [Thd =33] Info Default Stripes are collected for data processing！strip_no:143 2025-08-31 07:44:03.921 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:143,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:03.921 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:143,source_light_Type:A_SourceLightType 2025-08-31 07:44:03.921 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：143,A_SourceLightType 2025-08-31 07:44:03.922 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：143,B_SourceLightType 2025-08-31 07:44:03.922 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:143,source_light_Type:B_SourceLightType 2025-08-31 07:44:04.087 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;143/265, 2025-08-31 07:44:04.095 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:04.202 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:04 2025-08-31 07:44:04.264 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:04.285 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:04 2025-08-31 07:44:04.407 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:04.410 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":143,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_143_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:04.611 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 144 2025-08-31 07:44:04.611 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 144 2025-08-31 07:44:04.611 [Thd =193] Info Default 开始扫描条带； [144/265] 2025-08-31 07:44:04.621 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:44:04.624 [Thd =202] Info Default CaptureBeginX: 69.73072, CaptureBeginY:-3.03123, CaptureEndX:-69.54815, CaptureEndY:-3.03123, VectorBeginX:71.29561, VectorBeginY:-3.03123, VectorEndX:-71.50464, VectorEndY:-3.03123, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:44:04.624 [Thd =202] Info Default ***row:144, vectorBeginX:71.296, vectorBeginY:-3.031, captureBeginX:69.731, captureBeginY:-3.031, captureEndX:-69.548, captureEndY:-3.031, vectorEndX:-71.505, vectorEndY:-3.031 2025-08-31 07:44:04.624 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:04.625 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7307229916628,EndPoint:69.5481492970738 2025-08-31 07:44:04.911 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:04.913 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":143,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_143_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:09.442 [Thd =34] Info Default Stripes are collected for data processing！strip_no:144 2025-08-31 07:44:09.443 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:144,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:09.443 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:09.443 [Thd =33] Info Default Stripes are collected for data processing！strip_no:144 2025-08-31 07:44:09.443 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:144,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:09.443 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:144,source_light_Type:A_SourceLightType 2025-08-31 07:44:09.443 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:144,source_light_Type:B_SourceLightType 2025-08-31 07:44:09.444 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：144,A_SourceLightType 2025-08-31 07:44:09.444 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：144,B_SourceLightType 2025-08-31 07:44:09.623 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;144/265, 2025-08-31 07:44:09.632 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:09.675 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:09.823 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:09 2025-08-31 07:44:09.840 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:09 2025-08-31 07:44:09.923 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:09.925 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":144,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_144_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:10.015 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 145 2025-08-31 07:44:10.015 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 145 2025-08-31 07:44:10.015 [Thd =193] Info Default 开始扫描条带； [145/265] 2025-08-31 07:44:10.024 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:44:10.027 [Thd =202] Info Default ***row:145, vectorBeginX:-71.505, vectorBeginY:-3.460, captureBeginX:-69.886, captureBeginY:-3.460, captureEndX:69.393, captureEndY:-3.460, vectorEndX:71.296, vectorEndY:-3.460 2025-08-31 07:44:10.028 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:10.029 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8855552443777,EndPoint:-69.393317044359 2025-08-31 07:44:10.427 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:10.430 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":144,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_144_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:14.848 [Thd =34] Info Default Stripes are collected for data processing！strip_no:145 2025-08-31 07:44:14.849 [Thd =33] Info Default Stripes are collected for data processing！strip_no:145 2025-08-31 07:44:14.849 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:145,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:14.849 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:14.849 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:145,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:14.849 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:145,source_light_Type:B_SourceLightType 2025-08-31 07:44:14.849 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:145,source_light_Type:A_SourceLightType 2025-08-31 07:44:14.849 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：145,B_SourceLightType 2025-08-31 07:44:14.849 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：145,A_SourceLightType 2025-08-31 07:44:15.027 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;145/265, 2025-08-31 07:44:15.037 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:15.157 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:15.350 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:15.352 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":145,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_145_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:15.368 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:15 2025-08-31 07:44:15.379 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:15 2025-08-31 07:44:15.495 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 146 2025-08-31 07:44:15.495 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 146 2025-08-31 07:44:15.495 [Thd =299] Info Default 开始扫描条带； [146/265] 2025-08-31 07:44:15.504 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:44:15.507 [Thd =202] Info Default CaptureBeginX: 69.73077, CaptureBeginY:-3.88785, CaptureEndX:-69.54810, CaptureEndY:-3.88785, VectorBeginX:71.29566, VectorBeginY:-3.88785, VectorEndX:-71.50459, VectorEndY:-3.88785, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:44:15.507 [Thd =202] Info Default ***row:146, vectorBeginX:71.296, vectorBeginY:-3.888, captureBeginX:69.731, captureBeginY:-3.888, captureEndX:-69.548, captureEndY:-3.888, vectorEndX:-71.505, vectorEndY:-3.888 2025-08-31 07:44:15.507 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:15.508 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.73076876803,EndPoint:69.5481035207066 2025-08-31 07:44:15.848 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:15.857 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":145,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_145_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:20.326 [Thd =33] Info Default Stripes are collected for data processing！strip_no:146 2025-08-31 07:44:20.327 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:146,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:20.327 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:20.329 [Thd =34] Info Default Stripes are collected for data processing！strip_no:146 2025-08-31 07:44:20.329 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:146,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:20.329 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:146,source_light_Type:B_SourceLightType 2025-08-31 07:44:20.329 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:146,source_light_Type:A_SourceLightType 2025-08-31 07:44:20.330 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：146,B_SourceLightType 2025-08-31 07:44:20.330 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：146,A_SourceLightType 2025-08-31 07:44:20.398 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:20 2025-08-31 07:44:20.410 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:20 2025-08-31 07:44:20.498 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;146/265, 2025-08-31 07:44:20.507 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:20.561 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:20.812 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:20.814 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":146,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_146_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:20.900 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 147 2025-08-31 07:44:20.900 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 147 2025-08-31 07:44:20.900 [Thd =338] Info Default 开始扫描条带； [147/265] 2025-08-31 07:44:20.909 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:44:20.912 [Thd =202] Info Default ***row:147, vectorBeginX:-71.505, vectorBeginY:-4.316, captureBeginX:-69.886, captureBeginY:-4.316, captureEndX:69.393, captureEndY:-4.316, vectorEndX:71.296, vectorEndY:-4.316 2025-08-31 07:44:20.912 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:20.914 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8855079421316,EndPoint:-69.3933643466051 2025-08-31 07:44:21.331 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:21.333 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":146,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_146_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:25.738 [Thd =34] Info Default Stripes are collected for data processing！strip_no:147 2025-08-31 07:44:25.738 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:147,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:25.738 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:25.738 [Thd =33] Info Default Stripes are collected for data processing！strip_no:147 2025-08-31 07:44:25.738 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:147,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:25.738 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:147,source_light_Type:A_SourceLightType 2025-08-31 07:44:25.739 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:147,source_light_Type:B_SourceLightType 2025-08-31 07:44:25.739 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：147,A_SourceLightType 2025-08-31 07:44:25.739 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：147,B_SourceLightType 2025-08-31 07:44:25.904 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;147/265, 2025-08-31 07:44:25.913 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:25.936 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:25 2025-08-31 07:44:25.953 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:25.962 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:25 2025-08-31 07:44:26.222 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:26.224 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":147,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_147_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:26.302 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 148 2025-08-31 07:44:26.302 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 148 2025-08-31 07:44:26.302 [Thd =193] Info Default 开始扫描条带； [148/265] 2025-08-31 07:44:26.311 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:44:26.314 [Thd =202] Info Default CaptureBeginX: 69.73079, CaptureBeginY:-4.74447, CaptureEndX:-69.54808, CaptureEndY:-4.74447, VectorBeginX:71.29568, VectorBeginY:-4.74447, VectorEndX:-71.50457, VectorEndY:-4.74447, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:44:26.314 [Thd =202] Info Default ***row:148, vectorBeginX:71.296, vectorBeginY:-4.744, captureBeginX:69.731, captureBeginY:-4.744, captureEndX:-69.548, captureEndY:-4.744, vectorEndX:-71.505, vectorEndY:-4.744 2025-08-31 07:44:26.314 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:26.315 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7307939755495,EndPoint:69.5480783131871 2025-08-31 07:44:26.743 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:26.745 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":147,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_147_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:31.138 [Thd =34] Info Default Stripes are collected for data processing！strip_no:148 2025-08-31 07:44:31.138 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:148,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:31.138 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:31.139 [Thd =33] Info Default Stripes are collected for data processing！strip_no:148 2025-08-31 07:44:31.139 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:148,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:31.140 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:148,source_light_Type:A_SourceLightType 2025-08-31 07:44:31.140 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:148,source_light_Type:B_SourceLightType 2025-08-31 07:44:31.140 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：148,A_SourceLightType 2025-08-31 07:44:31.140 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：148,B_SourceLightType 2025-08-31 07:44:31.306 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;148/265, 2025-08-31 07:44:31.316 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:31.380 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:31.480 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:31 2025-08-31 07:44:31.494 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:31 2025-08-31 07:44:31.622 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:31.625 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":148,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_148_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:31.716 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 149 2025-08-31 07:44:31.716 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 149 2025-08-31 07:44:31.730 [Thd =311] Info Default 开始扫描条带； [149/265] 2025-08-31 07:44:31.739 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:44:31.742 [Thd =202] Info Default ***row:149, vectorBeginX:-71.505, vectorBeginY:-5.173, captureBeginX:-69.885, captureBeginY:-5.173, captureEndX:69.393, captureEndY:-5.173, vectorEndX:71.296, vectorEndY:-5.173 2025-08-31 07:44:31.742 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:31.743 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8854739455495,EndPoint:-69.3933983431871 2025-08-31 07:44:32.124 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:32.127 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":148,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_148_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:36.562 [Thd =34] Info Default Stripes are collected for data processing！strip_no:149 2025-08-31 07:44:36.563 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:149,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:36.563 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:36.563 [Thd =33] Info Default Stripes are collected for data processing！strip_no:149 2025-08-31 07:44:36.563 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:149,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:36.563 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:149,source_light_Type:A_SourceLightType 2025-08-31 07:44:36.563 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:149,source_light_Type:B_SourceLightType 2025-08-31 07:44:36.563 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：149,A_SourceLightType 2025-08-31 07:44:36.564 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：149,B_SourceLightType 2025-08-31 07:44:36.739 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;149/265, 2025-08-31 07:44:36.748 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:36.823 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:37.064 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:37.066 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":149,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_149_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:37.159 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 150 2025-08-31 07:44:37.159 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 150 2025-08-31 07:44:37.159 [Thd =322] Info Default 开始扫描条带； [150/265] 2025-08-31 07:44:37.168 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:44:37.171 [Thd =202] Info Default CaptureBeginX: 69.73084, CaptureBeginY:-5.60109, CaptureEndX:-69.54804, CaptureEndY:-5.60109, VectorBeginX:71.29573, VectorBeginY:-5.60109, VectorEndX:-71.50452, VectorEndY:-5.60109, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:44:37.171 [Thd =202] Info Default ***row:150, vectorBeginX:71.296, vectorBeginY:-5.601, captureBeginX:69.731, captureBeginY:-5.601, captureEndX:-69.548, captureEndY:-5.601, vectorEndX:-71.505, vectorEndY:-5.601 2025-08-31 07:44:37.171 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:37.172 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7308366391238,EndPoint:69.5480356496129 2025-08-31 07:44:37.542 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:37 2025-08-31 07:44:37.567 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:37.567 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:37 2025-08-31 07:44:37.569 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":149,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_149_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:42.008 [Thd =34] Info Default Stripes are collected for data processing！strip_no:150 2025-08-31 07:44:42.009 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:150,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:42.009 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:42.009 [Thd =33] Info Default Stripes are collected for data processing！strip_no:150 2025-08-31 07:44:42.009 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:150,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:42.009 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:150,source_light_Type:A_SourceLightType 2025-08-31 07:44:42.009 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:150,source_light_Type:B_SourceLightType 2025-08-31 07:44:42.009 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：150,A_SourceLightType 2025-08-31 07:44:42.009 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：150,B_SourceLightType 2025-08-31 07:44:42.083 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:42 2025-08-31 07:44:42.103 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:42 2025-08-31 07:44:42.175 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;150/265, 2025-08-31 07:44:42.184 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:42.230 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:42.489 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:42.491 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":150,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_150_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:42.571 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 151 2025-08-31 07:44:42.571 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 151 2025-08-31 07:44:42.571 [Thd =290] Info Default 开始扫描条带； [151/265] 2025-08-31 07:44:42.596 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:44:42.598 [Thd =202] Info Default ***row:151, vectorBeginX:-71.504, vectorBeginY:-6.029, captureBeginX:-69.885, captureBeginY:-6.029, captureEndX:69.393, captureEndY:-6.029, vectorEndX:71.296, vectorEndY:-6.029 2025-08-31 07:44:42.598 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:42.600 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8854286574636,EndPoint:-69.393443631273 2025-08-31 07:44:42.993 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:42.995 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":150,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_150_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:47.420 [Thd =33] Info Default Stripes are collected for data processing！strip_no:151 2025-08-31 07:44:47.420 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:151,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:47.420 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:47.420 [Thd =34] Info Default Stripes are collected for data processing！strip_no:151 2025-08-31 07:44:47.420 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:151,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:47.420 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:151,source_light_Type:B_SourceLightType 2025-08-31 07:44:47.420 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:151,source_light_Type:A_SourceLightType 2025-08-31 07:44:47.421 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：151,B_SourceLightType 2025-08-31 07:44:47.421 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：151,A_SourceLightType 2025-08-31 07:44:47.598 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;151/265, 2025-08-31 07:44:47.607 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:47.678 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:47.919 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:47.921 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":151,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_151_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:48.015 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 152 2025-08-31 07:44:48.015 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 152 2025-08-31 07:44:48.015 [Thd =311] Info Default 开始扫描条带； [152/265] 2025-08-31 07:44:48.041 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:44:48.043 [Thd =202] Info Default CaptureBeginX: 69.73090, CaptureBeginY:-6.45770, CaptureEndX:-69.54797, CaptureEndY:-6.45770, VectorBeginX:71.29579, VectorBeginY:-6.45770, VectorEndX:-71.50446, VectorEndY:-6.45770, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:44:48.043 [Thd =202] Info Default ***row:152, vectorBeginX:71.296, vectorBeginY:-6.458, captureBeginX:69.731, captureBeginY:-6.458, captureEndX:-69.548, captureEndY:-6.458, vectorEndX:-71.504, vectorEndY:-6.458 2025-08-31 07:44:48.043 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:48.046 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7308990170534,EndPoint:69.5479732716832 2025-08-31 07:44:48.151 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:48 2025-08-31 07:44:48.170 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:48 2025-08-31 07:44:48.425 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:48.427 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":151,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_151_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:52.686 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:52 2025-08-31 07:44:52.706 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:52 2025-08-31 07:44:52.865 [Thd =33] Info Default Stripes are collected for data processing！strip_no:152 2025-08-31 07:44:52.865 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:152,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:52.865 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:52.867 [Thd =34] Info Default Stripes are collected for data processing！strip_no:152 2025-08-31 07:44:52.867 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:152,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:52.867 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:152,source_light_Type:B_SourceLightType 2025-08-31 07:44:52.867 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:152,source_light_Type:A_SourceLightType 2025-08-31 07:44:52.867 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：152,B_SourceLightType 2025-08-31 07:44:52.867 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：152,A_SourceLightType 2025-08-31 07:44:53.041 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;152/265, 2025-08-31 07:44:53.051 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:53.142 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:53.351 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:53.370 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":152,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_152_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:53.496 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 153 2025-08-31 07:44:53.496 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 153 2025-08-31 07:44:53.496 [Thd =299] Info Default 开始扫描条带； [153/265] 2025-08-31 07:44:53.504 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:44:53.507 [Thd =202] Info Default ***row:153, vectorBeginX:-71.504, vectorBeginY:-6.886, captureBeginX:-69.885, captureBeginY:-6.886, captureEndX:69.393, captureEndY:-6.886, vectorEndX:71.296, vectorEndY:-6.886 2025-08-31 07:44:53.507 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:53.509 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8853737868581,EndPoint:-69.3934985018785 2025-08-31 07:44:53.878 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:53.881 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":152,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_152_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:58.338 [Thd =34] Info Default Stripes are collected for data processing！strip_no:153 2025-08-31 07:44:58.338 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:153,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:58.338 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:44:58.338 [Thd =33] Info Default Stripes are collected for data processing！strip_no:153 2025-08-31 07:44:58.338 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:153,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:44:58.338 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:153,source_light_Type:A_SourceLightType 2025-08-31 07:44:58.338 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:153,source_light_Type:B_SourceLightType 2025-08-31 07:44:58.338 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：153,A_SourceLightType 2025-08-31 07:44:58.338 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：153,B_SourceLightType 2025-08-31 07:44:58.506 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;153/265, 2025-08-31 07:44:58.515 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:44:58.550 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:44:58.840 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:44:58.842 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":153,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_153_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:44:58.885 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 154 2025-08-31 07:44:58.885 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 154 2025-08-31 07:44:58.885 [Thd =338] Info Default 开始扫描条带； [154/265] 2025-08-31 07:44:58.894 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:44:58.897 [Thd =202] Info Default CaptureBeginX: 69.73095, CaptureBeginY:-7.31431, CaptureEndX:-69.54792, CaptureEndY:-7.31431, VectorBeginX:71.29584, VectorBeginY:-7.31431, VectorEndX:-71.50441, VectorEndY:-7.31431, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:44:58.897 [Thd =202] Info Default ***row:154, vectorBeginX:71.296, vectorBeginY:-7.314, captureBeginX:69.731, captureBeginY:-7.314, captureEndX:-69.548, captureEndY:-7.314, vectorEndX:-71.504, vectorEndY:-7.314 2025-08-31 07:44:58.897 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:44:58.899 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7309505307253,EndPoint:69.5479217580113 2025-08-31 07:44:59.232 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:44:59 2025-08-31 07:44:59.245 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:44:59 2025-08-31 07:44:59.347 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:44:59.350 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":153,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_153_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:03.717 [Thd =33] Info Default Stripes are collected for data processing！strip_no:154 2025-08-31 07:45:03.717 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:154,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:03.717 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:03.722 [Thd =34] Info Default Stripes are collected for data processing！strip_no:154 2025-08-31 07:45:03.723 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:154,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:03.723 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:154,source_light_Type:B_SourceLightType 2025-08-31 07:45:03.723 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:154,source_light_Type:A_SourceLightType 2025-08-31 07:45:03.723 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：154,B_SourceLightType 2025-08-31 07:45:03.723 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：154,A_SourceLightType 2025-08-31 07:45:03.759 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:03 2025-08-31 07:45:03.779 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:03 2025-08-31 07:45:03.892 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;154/265, 2025-08-31 07:45:03.901 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:03.955 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:04.209 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:04.211 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":154,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_154_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:04.293 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 155 2025-08-31 07:45:04.293 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 155 2025-08-31 07:45:04.293 [Thd =290] Info Default 开始扫描条带； [155/265] 2025-08-31 07:45:04.302 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:45:04.305 [Thd =202] Info Default ***row:155, vectorBeginX:-71.504, vectorBeginY:-7.743, captureBeginX:-69.885, captureBeginY:-7.743, captureEndX:69.394, captureEndY:-7.743, vectorEndX:71.296, vectorEndY:-7.743 2025-08-31 07:45:04.305 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:04.307 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8853205642019,EndPoint:-69.3935517245348 2025-08-31 07:45:04.722 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:04.724 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":154,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_154_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:09.132 [Thd =34] Info Default Stripes are collected for data processing！strip_no:155 2025-08-31 07:45:09.132 [Thd =33] Info Default Stripes are collected for data processing！strip_no:155 2025-08-31 07:45:09.132 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:155,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:09.132 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:09.132 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:155,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:09.132 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:155,source_light_Type:B_SourceLightType 2025-08-31 07:45:09.133 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:155,source_light_Type:A_SourceLightType 2025-08-31 07:45:09.133 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：155,B_SourceLightType 2025-08-31 07:45:09.133 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：155,A_SourceLightType 2025-08-31 07:45:09.310 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;155/265, 2025-08-31 07:45:09.320 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:09.324 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:09 2025-08-31 07:45:09.359 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:09 2025-08-31 07:45:09.375 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:09.616 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:09.618 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":155,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_155_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:09.713 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 156 2025-08-31 07:45:09.713 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 156 2025-08-31 07:45:09.713 [Thd =299] Info Default 开始扫描条带； [156/265] 2025-08-31 07:45:09.721 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:45:09.724 [Thd =202] Info Default CaptureBeginX: 69.73096, CaptureBeginY:-8.17094, CaptureEndX:-69.54791, CaptureEndY:-8.17094, VectorBeginX:71.29585, VectorBeginY:-8.17094, VectorEndX:-71.50440, VectorEndY:-8.17094, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:45:09.724 [Thd =202] Info Default ***row:156, vectorBeginX:71.296, vectorBeginY:-8.171, captureBeginX:69.731, captureBeginY:-8.171, captureEndX:-69.548, captureEndY:-8.171, vectorEndX:-71.504, vectorEndY:-8.171 2025-08-31 07:45:09.724 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:09.725 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.730964873987,EndPoint:69.5479074147496 2025-08-31 07:45:10.128 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:10.131 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":155,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_155_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:14.543 [Thd =34] Info Default Stripes are collected for data processing！strip_no:156 2025-08-31 07:45:14.543 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:156,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:14.543 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:14.544 [Thd =33] Info Default Stripes are collected for data processing！strip_no:156 2025-08-31 07:45:14.544 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:156,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:14.544 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:156,source_light_Type:A_SourceLightType 2025-08-31 07:45:14.544 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:156,source_light_Type:B_SourceLightType 2025-08-31 07:45:14.544 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：156,A_SourceLightType 2025-08-31 07:45:14.544 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：156,B_SourceLightType 2025-08-31 07:45:14.713 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;156/265, 2025-08-31 07:45:14.736 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:14.855 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:14.889 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:14 2025-08-31 07:45:14.909 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:14 2025-08-31 07:45:15.040 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:15.042 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":156,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_156_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:15.192 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 157 2025-08-31 07:45:15.192 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 157 2025-08-31 07:45:15.192 [Thd =322] Info Default 开始扫描条带； [157/265] 2025-08-31 07:45:15.209 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:45:15.211 [Thd =202] Info Default ***row:157, vectorBeginX:-71.504, vectorBeginY:-8.599, captureBeginX:-69.885, captureBeginY:-8.599, captureEndX:69.394, captureEndY:-8.599, vectorEndX:71.296, vectorEndY:-8.599 2025-08-31 07:45:15.212 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:15.214 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8853230056081,EndPoint:-69.3935492831285 2025-08-31 07:45:15.555 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:15.558 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":156,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_156_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:20.038 [Thd =33] Info Default Stripes are collected for data processing！strip_no:157 2025-08-31 07:45:20.038 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:157,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:20.038 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:20.038 [Thd =34] Info Default Stripes are collected for data processing！strip_no:157 2025-08-31 07:45:20.038 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:157,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:20.038 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:157,source_light_Type:B_SourceLightType 2025-08-31 07:45:20.039 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:157,source_light_Type:A_SourceLightType 2025-08-31 07:45:20.039 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：157,B_SourceLightType 2025-08-31 07:45:20.039 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：157,A_SourceLightType 2025-08-31 07:45:20.216 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;157/265, 2025-08-31 07:45:20.225 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:20.273 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:20.537 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:20.539 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":157,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_157_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:22.262 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 158 2025-08-31 07:45:22.263 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 158 2025-08-31 07:45:22.263 [Thd =322] Info Default 开始扫描条带； [158/265] 2025-08-31 07:45:22.280 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:45:22.283 [Thd =202] Info Default CaptureBeginX: 69.73101, CaptureBeginY:-9.02756, CaptureEndX:-69.54787, CaptureEndY:-9.02756, VectorBeginX:71.29590, VectorBeginY:-9.02756, VectorEndX:-71.50435, VectorEndY:-9.02756, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:45:22.283 [Thd =202] Info Default ***row:158, vectorBeginX:71.296, vectorBeginY:-9.028, captureBeginX:69.731, captureBeginY:-9.028, captureEndX:-69.548, captureEndY:-9.028, vectorEndX:-71.504, vectorEndY:-9.028 2025-08-31 07:45:22.284 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:22.285 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7310068661745,EndPoint:69.5478654225621 2025-08-31 07:45:22.765 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:22 2025-08-31 07:45:22.778 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:22 2025-08-31 07:45:22.883 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:22.885 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":157,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_157_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:26.811 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:26 2025-08-31 07:45:26.835 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:26 2025-08-31 07:45:27.119 [Thd =34] Info Default Stripes are collected for data processing！strip_no:158 2025-08-31 07:45:27.119 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:158,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:27.119 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:27.120 [Thd =33] Info Default Stripes are collected for data processing！strip_no:158 2025-08-31 07:45:27.120 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:158,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:27.120 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:158,source_light_Type:A_SourceLightType 2025-08-31 07:45:27.120 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:158,source_light_Type:B_SourceLightType 2025-08-31 07:45:27.120 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：158,A_SourceLightType 2025-08-31 07:45:27.120 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：158,B_SourceLightType 2025-08-31 07:45:27.288 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;158/265, 2025-08-31 07:45:27.297 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:27.402 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:27.600 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:27.602 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":158,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_158_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:27.754 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 159 2025-08-31 07:45:27.754 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 159 2025-08-31 07:45:27.754 [Thd =340] Info Default 开始扫描条带； [159/265] 2025-08-31 07:45:27.763 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:45:27.766 [Thd =202] Info Default ***row:159, vectorBeginX:-71.504, vectorBeginY:-9.456, captureBeginX:-69.885, captureBeginY:-9.456, captureEndX:69.394, captureEndY:-9.456, vectorEndX:71.296, vectorEndY:-9.456 2025-08-31 07:45:27.766 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:27.767 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.885273750237,EndPoint:-69.3935985384996 2025-08-31 07:45:28.101 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:28.104 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":158,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_158_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:32.589 [Thd =34] Info Default Stripes are collected for data processing！strip_no:159 2025-08-31 07:45:32.589 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:159,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:32.589 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:32.590 [Thd =33] Info Default Stripes are collected for data processing！strip_no:159 2025-08-31 07:45:32.590 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:159,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:32.590 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:159,source_light_Type:A_SourceLightType 2025-08-31 07:45:32.590 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:159,source_light_Type:B_SourceLightType 2025-08-31 07:45:32.590 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：159,A_SourceLightType 2025-08-31 07:45:32.590 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：159,B_SourceLightType 2025-08-31 07:45:32.763 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;159/265, 2025-08-31 07:45:32.772 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:32.874 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:32 2025-08-31 07:45:32.904 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:32.920 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:32 2025-08-31 07:45:33.087 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:33.090 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":159,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_159_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:33.241 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 160 2025-08-31 07:45:33.241 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 160 2025-08-31 07:45:33.241 [Thd =320] Info Default 开始扫描条带； [160/265] 2025-08-31 07:45:33.250 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:45:33.253 [Thd =202] Info Default CaptureBeginX: 69.73105, CaptureBeginY:-9.88418, CaptureEndX:-69.54783, CaptureEndY:-9.88418, VectorBeginX:71.29594, VectorBeginY:-9.88418, VectorEndX:-71.50432, VectorEndY:-9.88418, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:45:33.253 [Thd =202] Info Default ***row:160, vectorBeginX:71.296, vectorBeginY:-9.884, captureBeginX:69.731, captureBeginY:-9.884, captureEndX:-69.548, captureEndY:-9.884, vectorEndX:-71.504, vectorEndY:-9.884 2025-08-31 07:45:33.253 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:33.254 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7310458676394,EndPoint:69.5478264210973 2025-08-31 07:45:33.622 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:33.624 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":159,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_159_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:38.072 [Thd =34] Info Default Stripes are collected for data processing！strip_no:160 2025-08-31 07:45:38.073 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:160,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:38.073 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:38.073 [Thd =33] Info Default Stripes are collected for data processing！strip_no:160 2025-08-31 07:45:38.073 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:160,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:38.073 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:160,source_light_Type:A_SourceLightType 2025-08-31 07:45:38.073 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:160,source_light_Type:B_SourceLightType 2025-08-31 07:45:38.074 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：160,A_SourceLightType 2025-08-31 07:45:38.074 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：160,B_SourceLightType 2025-08-31 07:45:38.250 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;160/265, 2025-08-31 07:45:38.259 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:38.311 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:38.440 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:38 2025-08-31 07:45:38.460 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:38 2025-08-31 07:45:38.568 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:38.570 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":160,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_160_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:38.647 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 161 2025-08-31 07:45:38.647 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 161 2025-08-31 07:45:38.647 [Thd =299] Info Default 开始扫描条带； [161/265] 2025-08-31 07:45:38.658 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:45:38.661 [Thd =202] Info Default ***row:161, vectorBeginX:-71.504, vectorBeginY:-10.312, captureBeginX:-69.885, captureBeginY:-10.312, captureEndX:69.394, captureEndY:-10.312, vectorEndX:71.296, vectorEndY:-10.312 2025-08-31 07:45:38.661 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:38.664 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8852292556081,EndPoint:-69.3936430331285 2025-08-31 07:45:39.079 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:39.082 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":160,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_160_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:43.484 [Thd =33] Info Default Stripes are collected for data processing！strip_no:161 2025-08-31 07:45:43.484 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:161,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:43.484 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:43.485 [Thd =34] Info Default Stripes are collected for data processing！strip_no:161 2025-08-31 07:45:43.485 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:161,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:43.485 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:161,source_light_Type:B_SourceLightType 2025-08-31 07:45:43.485 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:161,source_light_Type:A_SourceLightType 2025-08-31 07:45:43.485 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：161,B_SourceLightType 2025-08-31 07:45:43.485 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：161,A_SourceLightType 2025-08-31 07:45:43.661 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;161/265, 2025-08-31 07:45:43.670 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:43.758 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:43.980 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:43.982 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":161,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_161_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:44.106 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 162 2025-08-31 07:45:44.106 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 162 2025-08-31 07:45:44.106 [Thd =215] Info Default 开始扫描条带； [162/265] 2025-08-31 07:45:44.115 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:45:44.118 [Thd =202] Info Default CaptureBeginX: 69.73107, CaptureBeginY:-10.74080, CaptureEndX:-69.54780, CaptureEndY:-10.74080, VectorBeginX:71.29596, VectorBeginY:-10.74080, VectorEndX:-71.50429, VectorEndY:-10.74080, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:45:44.118 [Thd =202] Info Default ***row:162, vectorBeginX:71.296, vectorBeginY:-10.741, captureBeginX:69.731, captureBeginY:-10.741, captureEndX:-69.548, captureEndY:-10.741, vectorEndX:-71.504, vectorEndY:-10.741 2025-08-31 07:45:44.118 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:44.120 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7310740658816,EndPoint:69.5477982228551 2025-08-31 07:45:44.477 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:44.480 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":161,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_161_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:44.494 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:44 2025-08-31 07:45:44.514 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:44 2025-08-31 07:45:48.946 [Thd =34] Info Default Stripes are collected for data processing！strip_no:162 2025-08-31 07:45:48.947 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:162,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:48.947 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:48.947 [Thd =33] Info Default Stripes are collected for data processing！strip_no:162 2025-08-31 07:45:48.947 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:162,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:48.947 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:162,source_light_Type:A_SourceLightType 2025-08-31 07:45:48.948 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:162,source_light_Type:B_SourceLightType 2025-08-31 07:45:48.948 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：162,A_SourceLightType 2025-08-31 07:45:48.948 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：162,B_SourceLightType 2025-08-31 07:45:49.040 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:49 2025-08-31 07:45:49.062 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:49 2025-08-31 07:45:49.109 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;162/265, 2025-08-31 07:45:49.118 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:49.154 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:49.425 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:49.427 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":162,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_162_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:49.498 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 163 2025-08-31 07:45:49.498 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 163 2025-08-31 07:45:49.498 [Thd =265] Info Default 开始扫描条带； [163/265] 2025-08-31 07:45:49.507 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:45:49.510 [Thd =202] Info Default ***row:163, vectorBeginX:-71.504, vectorBeginY:-11.169, captureBeginX:-69.885, captureBeginY:-11.169, captureEndX:69.394, captureEndY:-11.169, vectorEndX:71.296, vectorEndY:-11.169 2025-08-31 07:45:49.510 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:49.512 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8852086867605,EndPoint:-69.3936636019762 2025-08-31 07:45:49.935 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:49.939 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":162,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_162_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:54.337 [Thd =34] Info Default Stripes are collected for data processing！strip_no:163 2025-08-31 07:45:54.338 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:163,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:54.338 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:54.338 [Thd =33] Info Default Stripes are collected for data processing！strip_no:163 2025-08-31 07:45:54.338 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:163,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:54.338 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:163,source_light_Type:A_SourceLightType 2025-08-31 07:45:54.339 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:163,source_light_Type:B_SourceLightType 2025-08-31 07:45:54.339 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：163,A_SourceLightType 2025-08-31 07:45:54.339 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：163,B_SourceLightType 2025-08-31 07:45:54.517 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;163/265, 2025-08-31 07:45:54.526 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:45:54.564 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:45:54.839 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:45:54.842 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":163,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_163_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:54.920 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 164 2025-08-31 07:45:54.920 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 164 2025-08-31 07:45:54.920 [Thd =302] Info Default 开始扫描条带； [164/265] 2025-08-31 07:45:54.930 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:45:54.933 [Thd =202] Info Default CaptureBeginX: 69.73109, CaptureBeginY:-11.59741, CaptureEndX:-69.54778, CaptureEndY:-11.59741, VectorBeginX:71.29598, VectorBeginY:-11.59741, VectorEndX:-71.50427, VectorEndY:-11.59741, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:45:54.933 [Thd =202] Info Default ***row:164, vectorBeginX:71.296, vectorBeginY:-11.597, captureBeginX:69.731, captureBeginY:-11.597, captureEndX:-69.548, captureEndY:-11.597, vectorEndX:-71.504, vectorEndY:-11.597 2025-08-31 07:45:54.933 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:45:54.935 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7310920712527,EndPoint:69.547780217484 2025-08-31 07:45:55.084 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:45:55 2025-08-31 07:45:55.104 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:45:55 2025-08-31 07:45:55.351 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:45:55.353 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":163,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_163_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:45:59.752 [Thd =34] Info Default Stripes are collected for data processing！strip_no:164 2025-08-31 07:45:59.753 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:164,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:59.753 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:45:59.753 [Thd =33] Info Default Stripes are collected for data processing！strip_no:164 2025-08-31 07:45:59.753 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:164,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:45:59.753 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:164,source_light_Type:A_SourceLightType 2025-08-31 07:45:59.753 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:164,source_light_Type:B_SourceLightType 2025-08-31 07:45:59.754 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：164,A_SourceLightType 2025-08-31 07:45:59.754 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：164,B_SourceLightType 2025-08-31 07:45:59.925 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;164/265, 2025-08-31 07:45:59.934 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:00.026 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:00.134 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:00 2025-08-31 07:46:00.150 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:00 2025-08-31 07:46:00.243 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:00.245 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":164,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_164_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:00.372 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 165 2025-08-31 07:46:00.372 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 165 2025-08-31 07:46:00.372 [Thd =302] Info Default 开始扫描条带； [165/265] 2025-08-31 07:46:00.381 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:46:00.384 [Thd =202] Info Default ***row:165, vectorBeginX:-71.504, vectorBeginY:-12.026, captureBeginX:-69.885, captureBeginY:-12.026, captureEndX:69.394, captureEndY:-12.026, vectorEndX:71.296, vectorEndY:-12.026 2025-08-31 07:46:00.384 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:00.386 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8851884841237,EndPoint:-69.3936838046129 2025-08-31 07:46:00.744 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:00.747 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":164,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_164_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:05.214 [Thd =33] Info Default Stripes are collected for data processing！strip_no:165 2025-08-31 07:46:05.214 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:165,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:05.214 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:05.217 [Thd =34] Info Default Stripes are collected for data processing！strip_no:165 2025-08-31 07:46:05.217 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:165,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:05.217 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:165,source_light_Type:B_SourceLightType 2025-08-31 07:46:05.217 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:165,source_light_Type:A_SourceLightType 2025-08-31 07:46:05.217 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：165,B_SourceLightType 2025-08-31 07:46:05.217 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：165,A_SourceLightType 2025-08-31 07:46:05.377 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;165/265, 2025-08-31 07:46:05.386 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:05.436 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:05.704 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:05.706 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":165,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_165_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:05.778 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 166 2025-08-31 07:46:05.778 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 166 2025-08-31 07:46:05.778 [Thd =193] Info Default 开始扫描条带； [166/265] 2025-08-31 07:46:05.787 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:46:05.790 [Thd =202] Info Default CaptureBeginX: 69.73112, CaptureBeginY:-12.45403, CaptureEndX:-69.54775, CaptureEndY:-12.45403, VectorBeginX:71.29601, VectorBeginY:-12.45403, VectorEndX:-71.50424, VectorEndY:-12.45403, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:46:05.790 [Thd =202] Info Default ***row:166, vectorBeginX:71.296, vectorBeginY:-12.454, captureBeginX:69.731, captureBeginY:-12.454, captureEndX:-69.548, captureEndY:-12.454, vectorEndX:-71.504, vectorEndY:-12.454 2025-08-31 07:46:05.790 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:05.792 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7311239926394,EndPoint:69.5477482960973 2025-08-31 07:46:06.242 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:06.244 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":165,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_165_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:06.684 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:06 2025-08-31 07:46:06.704 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:06 2025-08-31 07:46:10.610 [Thd =34] Info Default Stripes are collected for data processing！strip_no:166 2025-08-31 07:46:10.611 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:166,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:10.611 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:10.611 [Thd =33] Info Default Stripes are collected for data processing！strip_no:166 2025-08-31 07:46:10.611 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:166,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:10.611 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:166,source_light_Type:A_SourceLightType 2025-08-31 07:46:10.611 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:166,source_light_Type:B_SourceLightType 2025-08-31 07:46:10.611 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：166,A_SourceLightType 2025-08-31 07:46:10.611 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：166,B_SourceLightType 2025-08-31 07:46:10.745 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:10 2025-08-31 07:46:10.765 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:10 2025-08-31 07:46:10.791 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;166/265, 2025-08-31 07:46:10.800 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:10.838 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:11.102 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:11.104 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":166,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_166_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:11.175 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 167 2025-08-31 07:46:11.175 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 167 2025-08-31 07:46:11.175 [Thd =311] Info Default 开始扫描条带； [167/265] 2025-08-31 07:46:11.184 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:46:11.194 [Thd =202] Info Default ***row:167, vectorBeginX:-71.504, vectorBeginY:-12.882, captureBeginX:-69.885, captureBeginY:-12.882, captureEndX:69.394, captureEndY:-12.882, vectorEndX:71.296, vectorEndY:-12.882 2025-08-31 07:46:11.194 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:11.195 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8851613845144,EndPoint:-69.3937109042223 2025-08-31 07:46:11.623 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:11.625 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":166,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_166_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:16.015 [Thd =33] Info Default Stripes are collected for data processing！strip_no:167 2025-08-31 07:46:16.016 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:167,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:16.016 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:16.017 [Thd =34] Info Default Stripes are collected for data processing！strip_no:167 2025-08-31 07:46:16.017 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:167,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:16.017 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:167,source_light_Type:B_SourceLightType 2025-08-31 07:46:16.017 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:167,source_light_Type:A_SourceLightType 2025-08-31 07:46:16.017 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：167,B_SourceLightType 2025-08-31 07:46:16.017 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：167,A_SourceLightType 2025-08-31 07:46:16.193 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;167/265, 2025-08-31 07:46:16.203 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:16.286 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:16.302 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:16 2025-08-31 07:46:16.325 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:16 2025-08-31 07:46:16.513 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:16.515 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":167,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_167_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:16.628 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 168 2025-08-31 07:46:16.628 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 168 2025-08-31 07:46:16.629 [Thd =215] Info Default 开始扫描条带； [168/265] 2025-08-31 07:46:16.638 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:46:16.641 [Thd =202] Info Default CaptureBeginX: 69.73115, CaptureBeginY:-13.31065, CaptureEndX:-69.54772, CaptureEndY:-13.31065, VectorBeginX:71.29604, VectorBeginY:-13.31065, VectorEndX:-71.50421, VectorEndY:-13.31065, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:46:16.641 [Thd =202] Info Default ***row:168, vectorBeginX:71.296, vectorBeginY:-13.311, captureBeginX:69.731, captureBeginY:-13.311, captureEndX:-69.548, captureEndY:-13.311, vectorEndX:-71.504, vectorEndY:-13.311 2025-08-31 07:46:16.641 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:16.643 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7311494442995,EndPoint:69.5477228444371 2025-08-31 07:46:17.018 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:17.021 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":167,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_167_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:21.461 [Thd =34] Info Default Stripes are collected for data processing！strip_no:168 2025-08-31 07:46:21.461 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:168,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:21.478 [Thd =33] Info Default Stripes are collected for data processing！strip_no:168 2025-08-31 07:46:21.478 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:168,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:21.478 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:21.478 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:168,source_light_Type:A_SourceLightType 2025-08-31 07:46:21.478 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:168,source_light_Type:B_SourceLightType 2025-08-31 07:46:21.479 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：168,A_SourceLightType 2025-08-31 07:46:21.479 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：168,B_SourceLightType 2025-08-31 07:46:21.634 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;168/265, 2025-08-31 07:46:21.644 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:21.696 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:21.872 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:21 2025-08-31 07:46:21.893 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:21 2025-08-31 07:46:21.969 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:21.971 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":168,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_168_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:22.033 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 169 2025-08-31 07:46:22.033 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 169 2025-08-31 07:46:22.033 [Thd =311] Info Default 开始扫描条带； [169/265] 2025-08-31 07:46:22.042 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:46:22.045 [Thd =202] Info Default ***row:169, vectorBeginX:-71.504, vectorBeginY:-13.739, captureBeginX:-69.885, captureBeginY:-13.739, captureEndX:69.394, captureEndY:-13.739, vectorEndX:71.296, vectorEndY:-13.739 2025-08-31 07:46:22.045 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:22.047 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8851355666433,EndPoint:-69.3937367220934 2025-08-31 07:46:22.492 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:22.498 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":168,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_168_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:26.883 [Thd =34] Info Default Stripes are collected for data processing！strip_no:169 2025-08-31 07:46:26.883 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:169,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:26.884 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:26.884 [Thd =33] Info Default Stripes are collected for data processing！strip_no:169 2025-08-31 07:46:26.884 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:169,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:26.884 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:169,source_light_Type:A_SourceLightType 2025-08-31 07:46:26.884 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:169,source_light_Type:B_SourceLightType 2025-08-31 07:46:26.884 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：169,A_SourceLightType 2025-08-31 07:46:26.885 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：169,B_SourceLightType 2025-08-31 07:46:27.058 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;169/265, 2025-08-31 07:46:27.067 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:27.112 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:27.390 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:27.392 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":169,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_169_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:27.432 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:27 2025-08-31 07:46:27.444 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:27 2025-08-31 07:46:27.448 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 170 2025-08-31 07:46:27.448 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 170 2025-08-31 07:46:27.448 [Thd =290] Info Default 开始扫描条带； [170/265] 2025-08-31 07:46:27.457 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:46:27.460 [Thd =202] Info Default CaptureBeginX: 69.73118, CaptureBeginY:-14.16727, CaptureEndX:-69.54769, CaptureEndY:-14.16727, VectorBeginX:71.29607, VectorBeginY:-14.16727, VectorEndX:-71.50418, VectorEndY:-14.16727, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:46:27.460 [Thd =202] Info Default ***row:170, vectorBeginX:71.296, vectorBeginY:-14.167, captureBeginX:69.731, captureBeginY:-14.167, captureEndX:-69.548, captureEndY:-14.167, vectorEndX:-71.504, vectorEndY:-14.167 2025-08-31 07:46:27.460 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:27.461 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7311801449831,EndPoint:69.5476921437535 2025-08-31 07:46:27.904 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:27.906 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":169,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_169_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:31.978 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:31 2025-08-31 07:46:31.998 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:31 2025-08-31 07:46:32.288 [Thd =34] Info Default Stripes are collected for data processing！strip_no:170 2025-08-31 07:46:32.288 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:170,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:32.288 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:32.288 [Thd =33] Info Default Stripes are collected for data processing！strip_no:170 2025-08-31 07:46:32.289 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:170,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:32.289 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:170,source_light_Type:A_SourceLightType 2025-08-31 07:46:32.289 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：170,A_SourceLightType 2025-08-31 07:46:32.289 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：170,B_SourceLightType 2025-08-31 07:46:32.289 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:170,source_light_Type:B_SourceLightType 2025-08-31 07:46:32.459 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;170/265, 2025-08-31 07:46:32.469 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:32.566 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:32.770 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:32.777 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":170,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_170_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:32.905 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 171 2025-08-31 07:46:32.905 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 171 2025-08-31 07:46:32.905 [Thd =302] Info Default 开始扫描条带； [171/265] 2025-08-31 07:46:32.914 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:46:32.917 [Thd =202] Info Default ***row:171, vectorBeginX:-71.504, vectorBeginY:-14.596, captureBeginX:-69.885, captureBeginY:-14.596, captureEndX:69.394, captureEndY:-14.596, vectorEndX:71.296, vectorEndY:-14.596 2025-08-31 07:46:32.917 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:32.919 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.885075691155,EndPoint:-69.3937965975816 2025-08-31 07:46:33.282 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:33.284 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":170,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_170_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:37.742 [Thd =33] Info Default Stripes are collected for data processing！strip_no:171 2025-08-31 07:46:37.743 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:171,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:37.743 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:37.743 [Thd =34] Info Default Stripes are collected for data processing！strip_no:171 2025-08-31 07:46:37.743 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:171,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:37.743 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:171,source_light_Type:B_SourceLightType 2025-08-31 07:46:37.743 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:171,source_light_Type:A_SourceLightType 2025-08-31 07:46:37.743 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：171,B_SourceLightType 2025-08-31 07:46:37.743 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：171,A_SourceLightType 2025-08-31 07:46:37.918 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;171/265, 2025-08-31 07:46:37.927 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:37.982 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:38.019 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:38 2025-08-31 07:46:38.029 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:38 2025-08-31 07:46:38.230 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:38.232 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":171,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_171_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:38.323 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 172 2025-08-31 07:46:38.323 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 172 2025-08-31 07:46:38.323 [Thd =321] Info Default 开始扫描条带； [172/265] 2025-08-31 07:46:38.332 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:46:38.335 [Thd =202] Info Default CaptureBeginX: 69.73126, CaptureBeginY:-15.02389, CaptureEndX:-69.54762, CaptureEndY:-15.02389, VectorBeginX:71.29615, VectorBeginY:-15.02389, VectorEndX:-71.50410, VectorEndY:-15.02389, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:46:38.335 [Thd =202] Info Default ***row:172, vectorBeginX:71.296, vectorBeginY:-15.024, captureBeginX:69.731, captureBeginY:-15.024, captureEndX:-69.548, captureEndY:-15.024, vectorEndX:-71.504, vectorEndY:-15.024 2025-08-31 07:46:38.335 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:38.336 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.731256255823,EndPoint:69.5476160329137 2025-08-31 07:46:38.737 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:38.740 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":171,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_171_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:43.060 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:43 2025-08-31 07:46:43.080 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:43 2025-08-31 07:46:43.154 [Thd =34] Info Default Stripes are collected for data processing！strip_no:172 2025-08-31 07:46:43.154 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:172,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:43.154 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:43.155 [Thd =33] Info Default Stripes are collected for data processing！strip_no:172 2025-08-31 07:46:43.155 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:172,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:43.155 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:172,source_light_Type:A_SourceLightType 2025-08-31 07:46:43.155 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:172,source_light_Type:B_SourceLightType 2025-08-31 07:46:43.155 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：172,A_SourceLightType 2025-08-31 07:46:43.155 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：172,B_SourceLightType 2025-08-31 07:46:43.331 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;172/265, 2025-08-31 07:46:43.340 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:43.446 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:43.651 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:43.653 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":172,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_172_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:43.796 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 173 2025-08-31 07:46:43.796 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 173 2025-08-31 07:46:43.796 [Thd =215] Info Default 开始扫描条带； [173/265] 2025-08-31 07:46:43.805 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:46:43.808 [Thd =202] Info Default ***row:173, vectorBeginX:-71.504, vectorBeginY:-15.452, captureBeginX:-69.885, captureBeginY:-15.452, captureEndX:69.394, captureEndY:-15.452, vectorEndX:71.296, vectorEndY:-15.452 2025-08-31 07:46:43.808 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:43.810 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.885018257073,EndPoint:-69.3938540316637 2025-08-31 07:46:44.153 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:44.156 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":172,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_172_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:48.631 [Thd =33] Info Default Stripes are collected for data processing！strip_no:173 2025-08-31 07:46:48.631 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:173,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:48.631 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:48.633 [Thd =34] Info Default Stripes are collected for data processing！strip_no:173 2025-08-31 07:46:48.633 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:173,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:48.633 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:173,source_light_Type:B_SourceLightType 2025-08-31 07:46:48.633 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:173,source_light_Type:A_SourceLightType 2025-08-31 07:46:48.633 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：173,B_SourceLightType 2025-08-31 07:46:48.633 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：173,A_SourceLightType 2025-08-31 07:46:48.804 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;173/265, 2025-08-31 07:46:48.813 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:48.860 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:49.149 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:49.151 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":173,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_173_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:49.197 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 174 2025-08-31 07:46:49.197 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 174 2025-08-31 07:46:49.197 [Thd =262] Info Default 开始扫描条带； [174/265] 2025-08-31 07:46:49.206 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:46:49.209 [Thd =202] Info Default CaptureBeginX: 69.73128, CaptureBeginY:-15.88051, CaptureEndX:-69.54759, CaptureEndY:-15.88051, VectorBeginX:71.29617, VectorBeginY:-15.88051, VectorEndX:-71.50408, VectorEndY:-15.88051, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:46:49.209 [Thd =202] Info Default ***row:174, vectorBeginX:71.296, vectorBeginY:-15.881, captureBeginX:69.731, captureBeginY:-15.881, captureEndX:-69.548, captureEndY:-15.881, vectorEndX:-71.504, vectorEndY:-15.881 2025-08-31 07:46:49.209 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:49.210 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7312799984987,EndPoint:69.5475922902379 2025-08-31 07:46:49.613 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:49 2025-08-31 07:46:49.632 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:49 2025-08-31 07:46:49.667 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:49.669 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":173,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_173_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:54.028 [Thd =34] Info Default Stripes are collected for data processing！strip_no:174 2025-08-31 07:46:54.028 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:174,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:54.028 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:54.029 [Thd =33] Info Default Stripes are collected for data processing！strip_no:174 2025-08-31 07:46:54.029 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:174,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:54.029 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:174,source_light_Type:A_SourceLightType 2025-08-31 07:46:54.029 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:174,source_light_Type:B_SourceLightType 2025-08-31 07:46:54.029 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：174,A_SourceLightType 2025-08-31 07:46:54.029 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：174,B_SourceLightType 2025-08-31 07:46:54.148 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:46:54 2025-08-31 07:46:54.160 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:46:54 2025-08-31 07:46:54.207 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;174/265, 2025-08-31 07:46:54.217 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:54.257 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:54.508 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:46:54.511 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":174,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_174_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:54.610 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 175 2025-08-31 07:46:54.610 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 175 2025-08-31 07:46:54.610 [Thd =299] Info Default 开始扫描条带； [175/265] 2025-08-31 07:46:54.619 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:46:54.622 [Thd =202] Info Default ***row:175, vectorBeginX:-71.504, vectorBeginY:-16.309, captureBeginX:-69.885, captureBeginY:-16.309, captureEndX:69.394, captureEndY:-16.309, vectorEndX:71.296, vectorEndY:-16.309 2025-08-31 07:46:54.622 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:46:54.623 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8849998244558,EndPoint:-69.3938724642809 2025-08-31 07:46:55.013 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:55.016 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":174,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_174_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:46:59.444 [Thd =33] Info Default Stripes are collected for data processing！strip_no:175 2025-08-31 07:46:59.444 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:175,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:59.444 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:46:59.448 [Thd =34] Info Default Stripes are collected for data processing！strip_no:175 2025-08-31 07:46:59.448 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:175,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:46:59.448 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:175,source_light_Type:B_SourceLightType 2025-08-31 07:46:59.448 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:175,source_light_Type:A_SourceLightType 2025-08-31 07:46:59.449 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：175,B_SourceLightType 2025-08-31 07:46:59.449 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：175,A_SourceLightType 2025-08-31 07:46:59.633 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;175/265, 2025-08-31 07:46:59.642 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:46:59.687 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:46:59.947 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:46:59.949 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":175,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_175_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:00.039 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 176 2025-08-31 07:47:00.039 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 176 2025-08-31 07:47:00.039 [Thd =338] Info Default 开始扫描条带； [176/265] 2025-08-31 07:47:00.048 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:47:00.050 [Thd =202] Info Default CaptureBeginX: 69.73131, CaptureBeginY:-16.73713, CaptureEndX:-69.54756, CaptureEndY:-16.73713, VectorBeginX:71.29620, VectorBeginY:-16.73713, VectorEndX:-71.50405, VectorEndY:-16.73713, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:47:00.050 [Thd =202] Info Default ***row:176, vectorBeginX:71.296, vectorBeginY:-16.737, captureBeginX:69.731, captureBeginY:-16.737, captureEndX:-69.548, captureEndY:-16.737, vectorEndX:-71.504, vectorEndY:-16.737 2025-08-31 07:47:00.051 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:00.052 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7313107602175,EndPoint:69.5475615285191 2025-08-31 07:47:00.451 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:00.453 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":175,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_175_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:01.199 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:01 2025-08-31 07:47:01.212 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:01 2025-08-31 07:47:04.870 [Thd =33] Info Default Stripes are collected for data processing！strip_no:176 2025-08-31 07:47:04.870 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:176,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:04.870 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:04.873 [Thd =34] Info Default Stripes are collected for data processing！strip_no:176 2025-08-31 07:47:04.873 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:176,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:04.873 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:176,source_light_Type:B_SourceLightType 2025-08-31 07:47:04.873 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:176,source_light_Type:A_SourceLightType 2025-08-31 07:47:04.873 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：176,B_SourceLightType 2025-08-31 07:47:04.873 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：176,A_SourceLightType 2025-08-31 07:47:05.044 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;176/265, 2025-08-31 07:47:05.053 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:05.097 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:05.232 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:05 2025-08-31 07:47:05.259 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:05 2025-08-31 07:47:05.353 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:05.356 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":176,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_176_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:05.432 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 177 2025-08-31 07:47:05.432 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 177 2025-08-31 07:47:05.432 [Thd =299] Info Default 开始扫描条带； [177/265] 2025-08-31 07:47:05.441 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:47:05.444 [Thd =202] Info Default ***row:177, vectorBeginX:-71.504, vectorBeginY:-17.165, captureBeginX:-69.885, captureBeginY:-17.165, captureEndX:69.394, captureEndY:-17.165, vectorEndX:71.296, vectorEndY:-17.165 2025-08-31 07:47:05.444 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:05.446 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8849741896902,EndPoint:-69.3938980990465 2025-08-31 07:47:05.860 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:05.863 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":176,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_176_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:10.270 [Thd =34] Info Default Stripes are collected for data processing！strip_no:177 2025-08-31 07:47:10.270 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:177,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:10.270 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:10.272 [Thd =33] Info Default Stripes are collected for data processing！strip_no:177 2025-08-31 07:47:10.272 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:177,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:10.272 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:177,source_light_Type:A_SourceLightType 2025-08-31 07:47:10.273 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:177,source_light_Type:B_SourceLightType 2025-08-31 07:47:10.273 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：177,A_SourceLightType 2025-08-31 07:47:10.273 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：177,B_SourceLightType 2025-08-31 07:47:10.437 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;177/265, 2025-08-31 07:47:10.446 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:10.483 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:10.753 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:10.755 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":177,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_177_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:10.822 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 178 2025-08-31 07:47:10.822 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 178 2025-08-31 07:47:10.822 [Thd =311] Info Default 开始扫描条带； [178/265] 2025-08-31 07:47:10.831 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:47:10.834 [Thd =202] Info Default CaptureBeginX: 69.73135, CaptureBeginY:-17.59375, CaptureEndX:-69.54753, CaptureEndY:-17.59375, VectorBeginX:71.29624, VectorBeginY:-17.59375, VectorEndX:-71.50401, VectorEndY:-17.59375, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:47:10.834 [Thd =202] Info Default ***row:178, vectorBeginX:71.296, vectorBeginY:-17.594, captureBeginX:69.731, captureBeginY:-17.594, captureEndX:-69.548, captureEndY:-17.594, vectorEndX:-71.504, vectorEndY:-17.594 2025-08-31 07:47:10.834 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:10.836 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7313467099245,EndPoint:69.5475255788121 2025-08-31 07:47:11.282 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:11.285 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":177,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_177_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:11.290 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:11 2025-08-31 07:47:11.301 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:11 2025-08-31 07:47:15.655 [Thd =34] Info Default Stripes are collected for data processing！strip_no:178 2025-08-31 07:47:15.656 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:178,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:15.656 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:15.656 [Thd =33] Info Default Stripes are collected for data processing！strip_no:178 2025-08-31 07:47:15.656 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:178,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:15.656 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:178,source_light_Type:A_SourceLightType 2025-08-31 07:47:15.656 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:178,source_light_Type:B_SourceLightType 2025-08-31 07:47:15.656 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：178,A_SourceLightType 2025-08-31 07:47:15.656 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：178,B_SourceLightType 2025-08-31 07:47:15.833 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;178/265, 2025-08-31 07:47:15.833 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:15 2025-08-31 07:47:15.842 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:15.844 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:15 2025-08-31 07:47:15.881 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:16.150 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:16.152 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":178,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_178_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:16.217 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 179 2025-08-31 07:47:16.217 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 179 2025-08-31 07:47:16.217 [Thd =321] Info Default 开始扫描条带； [179/265] 2025-08-31 07:47:16.226 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:47:16.228 [Thd =202] Info Default ***row:179, vectorBeginX:-71.504, vectorBeginY:-18.022, captureBeginX:-69.885, captureBeginY:-18.022, captureEndX:69.394, captureEndY:-18.022, vectorEndX:71.296, vectorEndY:-18.022 2025-08-31 07:47:16.228 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:16.230 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8849257277761,EndPoint:-69.3939465609605 2025-08-31 07:47:16.653 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:16.655 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":178,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_178_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:21.053 [Thd =34] Info Default Stripes are collected for data processing！strip_no:179 2025-08-31 07:47:21.054 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:179,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:21.054 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:21.055 [Thd =33] Info Default Stripes are collected for data processing！strip_no:179 2025-08-31 07:47:21.055 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:179,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:21.055 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:179,source_light_Type:A_SourceLightType 2025-08-31 07:47:21.055 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:179,source_light_Type:B_SourceLightType 2025-08-31 07:47:21.055 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：179,A_SourceLightType 2025-08-31 07:47:21.055 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：179,B_SourceLightType 2025-08-31 07:47:21.224 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;179/265, 2025-08-31 07:47:21.233 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:21.283 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:21.539 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:21.541 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":179,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_179_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:21.631 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 180 2025-08-31 07:47:21.631 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 180 2025-08-31 07:47:21.631 [Thd =311] Info Default 开始扫描条带； [180/265] 2025-08-31 07:47:21.639 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:47:21.642 [Thd =202] Info Default CaptureBeginX: 69.73138, CaptureBeginY:-18.45038, CaptureEndX:-69.54749, CaptureEndY:-18.45038, VectorBeginX:71.29627, VectorBeginY:-18.45038, VectorEndX:-71.50398, VectorEndY:-18.45038, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:47:21.642 [Thd =202] Info Default ***row:180, vectorBeginX:71.296, vectorBeginY:-18.450, captureBeginX:69.731, captureBeginY:-18.450, captureEndX:-69.547, captureEndY:-18.450, vectorEndX:-71.504, vectorEndY:-18.450 2025-08-31 07:47:21.642 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:21.643 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7313796078737,EndPoint:69.5474926808629 2025-08-31 07:47:21.884 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:21 2025-08-31 07:47:21.896 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:21 2025-08-31 07:47:22.054 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:22.056 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":179,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_179_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:26.463 [Thd =34] Info Default Stripes are collected for data processing！strip_no:180 2025-08-31 07:47:26.463 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:180,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:26.463 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:26.463 [Thd =33] Info Default Stripes are collected for data processing！strip_no:180 2025-08-31 07:47:26.464 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:180,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:26.464 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:180,source_light_Type:A_SourceLightType 2025-08-31 07:47:26.464 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:180,source_light_Type:B_SourceLightType 2025-08-31 07:47:26.464 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：180,A_SourceLightType 2025-08-31 07:47:26.464 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：180,B_SourceLightType 2025-08-31 07:47:26.636 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;180/265, 2025-08-31 07:47:26.645 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:26.783 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:26.924 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:26 2025-08-31 07:47:26.934 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:26 2025-08-31 07:47:26.953 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:26.956 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":180,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_180_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:27.121 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 181 2025-08-31 07:47:27.121 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 181 2025-08-31 07:47:27.121 [Thd =265] Info Default 开始扫描条带； [181/265] 2025-08-31 07:47:27.144 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:47:27.147 [Thd =202] Info Default ***row:181, vectorBeginX:-71.504, vectorBeginY:-18.879, captureBeginX:-69.885, captureBeginY:-18.879, captureEndX:69.394, captureEndY:-18.879, vectorEndX:71.296, vectorEndY:-18.879 2025-08-31 07:47:27.147 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:27.149 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8848873366628,EndPoint:-69.3939849520738 2025-08-31 07:47:27.465 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:27.467 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":180,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_180_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:31.968 [Thd =34] Info Default Stripes are collected for data processing！strip_no:181 2025-08-31 07:47:31.969 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:181,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:31.969 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:31.969 [Thd =33] Info Default Stripes are collected for data processing！strip_no:181 2025-08-31 07:47:31.969 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:181,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:31.969 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:181,source_light_Type:A_SourceLightType 2025-08-31 07:47:31.969 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:181,source_light_Type:B_SourceLightType 2025-08-31 07:47:31.969 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：181,A_SourceLightType 2025-08-31 07:47:31.969 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：181,B_SourceLightType 2025-08-31 07:47:32.147 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;181/265, 2025-08-31 07:47:32.156 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:32.205 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:32.456 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:32 2025-08-31 07:47:32.467 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:32.469 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":181,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_181_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:32.490 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:32 2025-08-31 07:47:32.564 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 182 2025-08-31 07:47:32.564 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 182 2025-08-31 07:47:32.564 [Thd =265] Info Default 开始扫描条带； [182/265] 2025-08-31 07:47:32.573 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:47:32.576 [Thd =202] Info Default CaptureBeginX: 69.73143, CaptureBeginY:-19.30700, CaptureEndX:-69.54744, CaptureEndY:-19.30700, VectorBeginX:71.29632, VectorBeginY:-19.30700, VectorEndX:-71.50393, VectorEndY:-19.30700, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:47:32.576 [Thd =202] Info Default ***row:182, vectorBeginX:71.296, vectorBeginY:-19.307, captureBeginX:69.731, captureBeginY:-19.307, captureEndX:-69.547, captureEndY:-19.307, vectorEndX:-71.504, vectorEndY:-19.307 2025-08-31 07:47:32.576 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:32.578 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7314288022097,EndPoint:69.5474434865269 2025-08-31 07:47:32.968 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:32.971 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":181,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_181_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:37.398 [Thd =34] Info Default Stripes are collected for data processing！strip_no:182 2025-08-31 07:47:37.398 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:182,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:37.398 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:37.400 [Thd =33] Info Default Stripes are collected for data processing！strip_no:182 2025-08-31 07:47:37.400 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:182,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:37.400 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:182,source_light_Type:A_SourceLightType 2025-08-31 07:47:37.400 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:182,source_light_Type:B_SourceLightType 2025-08-31 07:47:37.400 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：182,A_SourceLightType 2025-08-31 07:47:37.400 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：182,B_SourceLightType 2025-08-31 07:47:37.520 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:37 2025-08-31 07:47:37.532 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:37 2025-08-31 07:47:37.577 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;182/265, 2025-08-31 07:47:37.586 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:37.625 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:37.878 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:37.881 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":182,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_182_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:37.971 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 183 2025-08-31 07:47:37.971 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 183 2025-08-31 07:47:37.971 [Thd =290] Info Default 开始扫描条带； [183/265] 2025-08-31 07:47:37.980 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:47:37.983 [Thd =202] Info Default ***row:183, vectorBeginX:-71.504, vectorBeginY:-19.735, captureBeginX:-69.885, captureBeginY:-19.735, captureEndX:69.394, captureEndY:-19.735, vectorEndX:71.296, vectorEndY:-19.735 2025-08-31 07:47:37.983 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:37.984 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8848503493581,EndPoint:-69.3940219393785 2025-08-31 07:47:38.386 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:38.388 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":182,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_182_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:42.817 [Thd =34] Info Default Stripes are collected for data processing！strip_no:183 2025-08-31 07:47:42.818 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:183,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:42.818 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:42.819 [Thd =33] Info Default Stripes are collected for data processing！strip_no:183 2025-08-31 07:47:42.819 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:183,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:42.819 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:183,source_light_Type:A_SourceLightType 2025-08-31 07:47:42.819 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：183,A_SourceLightType 2025-08-31 07:47:42.819 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：183,B_SourceLightType 2025-08-31 07:47:42.819 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:183,source_light_Type:B_SourceLightType 2025-08-31 07:47:42.972 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;183/265, 2025-08-31 07:47:42.981 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:43.053 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:43 2025-08-31 07:47:43.053 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:43.065 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:43 2025-08-31 07:47:43.302 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:43.304 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":183,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_183_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:43.398 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 184 2025-08-31 07:47:43.398 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 184 2025-08-31 07:47:43.398 [Thd =215] Info Default 开始扫描条带； [184/265] 2025-08-31 07:47:43.407 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:47:43.410 [Thd =202] Info Default CaptureBeginX: 69.73145, CaptureBeginY:-20.16362, CaptureEndX:-69.54742, CaptureEndY:-20.16362, VectorBeginX:71.29634, VectorBeginY:-20.16362, VectorEndX:-71.50391, VectorEndY:-20.16362, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:47:43.410 [Thd =202] Info Default ***row:184, vectorBeginX:71.296, vectorBeginY:-20.164, captureBeginX:69.731, captureBeginY:-20.164, captureEndX:-69.547, captureEndY:-20.164, vectorEndX:-71.504, vectorEndY:-20.164 2025-08-31 07:47:43.410 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:43.412 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7314488217409,EndPoint:69.5474234669957 2025-08-31 07:47:43.804 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:43.807 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":183,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_183_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:48.099 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:48 2025-08-31 07:47:48.135 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:48 2025-08-31 07:47:48.235 [Thd =33] Info Default Stripes are collected for data processing！strip_no:184 2025-08-31 07:47:48.236 [Thd =34] Info Default Stripes are collected for data processing！strip_no:184 2025-08-31 07:47:48.236 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:184,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:48.236 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:48.236 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:184,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:48.236 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:184,source_light_Type:A_SourceLightType 2025-08-31 07:47:48.236 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:184,source_light_Type:B_SourceLightType 2025-08-31 07:47:48.236 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：184,A_SourceLightType 2025-08-31 07:47:48.236 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：184,B_SourceLightType 2025-08-31 07:47:48.414 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;184/265, 2025-08-31 07:47:48.423 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:48.505 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:48.719 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:48.721 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":184,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_184_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:48.849 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 185 2025-08-31 07:47:48.849 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 185 2025-08-31 07:47:48.849 [Thd =340] Info Default 开始扫描条带； [185/265] 2025-08-31 07:47:48.858 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:47:48.861 [Thd =202] Info Default ***row:185, vectorBeginX:-71.504, vectorBeginY:-20.592, captureBeginX:-69.885, captureBeginY:-20.592, captureEndX:69.394, captureEndY:-20.592, vectorEndX:71.296, vectorEndY:-20.592 2025-08-31 07:47:48.861 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:48.863 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8848334426198,EndPoint:-69.3940388461168 2025-08-31 07:47:49.233 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:49.235 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":184,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_184_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:53.687 [Thd =34] Info Default Stripes are collected for data processing！strip_no:185 2025-08-31 07:47:53.688 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:185,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:53.688 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:53.688 [Thd =33] Info Default Stripes are collected for data processing！strip_no:185 2025-08-31 07:47:53.688 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:185,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:53.688 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:185,source_light_Type:A_SourceLightType 2025-08-31 07:47:53.688 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:185,source_light_Type:B_SourceLightType 2025-08-31 07:47:53.688 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：185,A_SourceLightType 2025-08-31 07:47:53.689 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：185,B_SourceLightType 2025-08-31 07:47:53.864 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;185/265, 2025-08-31 07:47:53.873 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:53.927 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:54.188 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:54.191 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":185,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_185_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:54.271 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 186 2025-08-31 07:47:54.271 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 186 2025-08-31 07:47:54.271 [Thd =265] Info Default 开始扫描条带； [186/265] 2025-08-31 07:47:54.280 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:47:54.283 [Thd =202] Info Default CaptureBeginX: 69.73150, CaptureBeginY:-21.02023, CaptureEndX:-69.54738, CaptureEndY:-21.02023, VectorBeginX:71.29639, VectorBeginY:-21.02023, VectorEndX:-71.50386, VectorEndY:-21.02023, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:47:54.283 [Thd =202] Info Default ***row:186, vectorBeginX:71.296, vectorBeginY:-21.020, captureBeginX:69.731, captureBeginY:-21.020, captureEndX:-69.547, captureEndY:-21.020, vectorEndX:-71.504, vectorEndY:-21.020 2025-08-31 07:47:54.283 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:54.285 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7314965512331,EndPoint:69.5473757375035 2025-08-31 07:47:54.671 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:54 2025-08-31 07:47:54.683 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:54 2025-08-31 07:47:54.694 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:47:54.697 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":185,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_185_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:59.115 [Thd =34] Info Default Stripes are collected for data processing！strip_no:186 2025-08-31 07:47:59.115 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:186,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:59.115 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:47:59.115 [Thd =33] Info Default Stripes are collected for data processing！strip_no:186 2025-08-31 07:47:59.116 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:186,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:47:59.116 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:186,source_light_Type:A_SourceLightType 2025-08-31 07:47:59.116 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:186,source_light_Type:B_SourceLightType 2025-08-31 07:47:59.116 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：186,A_SourceLightType 2025-08-31 07:47:59.116 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：186,B_SourceLightType 2025-08-31 07:47:59.222 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:47:59 2025-08-31 07:47:59.236 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:47:59 2025-08-31 07:47:59.290 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;186/265, 2025-08-31 07:47:59.299 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:47:59.360 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:47:59.594 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:47:59.596 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":186,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_186_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:47:59.698 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 187 2025-08-31 07:47:59.698 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 187 2025-08-31 07:47:59.698 [Thd =302] Info Default 开始扫描条带； [187/265] 2025-08-31 07:47:59.707 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:47:59.710 [Thd =202] Info Default ***row:187, vectorBeginX:-71.504, vectorBeginY:-21.449, captureBeginX:-69.885, captureBeginY:-21.449, captureEndX:69.394, captureEndY:-21.449, vectorEndX:71.296, vectorEndY:-21.449 2025-08-31 07:47:59.710 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:47:59.711 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8847763747487,EndPoint:-69.3940959139879 2025-08-31 07:48:00.117 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:00.120 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":186,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_186_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:04.533 [Thd =34] Info Default Stripes are collected for data processing！strip_no:187 2025-08-31 07:48:04.533 [Thd =33] Info Default Stripes are collected for data processing！strip_no:187 2025-08-31 07:48:04.533 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:187,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:04.533 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:04.533 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:187,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:04.533 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:187,source_light_Type:B_SourceLightType 2025-08-31 07:48:04.533 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:187,source_light_Type:A_SourceLightType 2025-08-31 07:48:04.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：187,B_SourceLightType 2025-08-31 07:48:04.533 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：187,A_SourceLightType 2025-08-31 07:48:04.714 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;187/265, 2025-08-31 07:48:04.723 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:04.768 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:05.028 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:05.031 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":187,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_187_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:05.125 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 188 2025-08-31 07:48:05.126 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 188 2025-08-31 07:48:05.126 [Thd =340] Info Default 开始扫描条带； [188/265] 2025-08-31 07:48:05.136 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:48:05.138 [Thd =202] Info Default CaptureBeginX: 69.73153, CaptureBeginY:-21.87685, CaptureEndX:-69.54734, CaptureEndY:-21.87685, VectorBeginX:71.29642, VectorBeginY:-21.87685, VectorEndX:-71.50383, VectorEndY:-21.87685, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:48:05.139 [Thd =202] Info Default ***row:188, vectorBeginX:71.296, vectorBeginY:-21.877, captureBeginX:69.732, captureBeginY:-21.877, captureEndX:-69.547, captureEndY:-21.877, vectorEndX:-71.504, vectorEndY:-21.877 2025-08-31 07:48:05.139 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:05.141 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7315282284792,EndPoint:69.5473440602574 2025-08-31 07:48:05.288 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:05 2025-08-31 07:48:05.299 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:05 2025-08-31 07:48:05.534 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:05.537 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":187,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_187_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:09.963 [Thd =33] Info Default Stripes are collected for data processing！strip_no:188 2025-08-31 07:48:09.963 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:188,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:09.964 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:09.967 [Thd =34] Info Default Stripes are collected for data processing！strip_no:188 2025-08-31 07:48:09.968 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:188,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:09.968 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:188,source_light_Type:B_SourceLightType 2025-08-31 07:48:09.968 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:188,source_light_Type:A_SourceLightType 2025-08-31 07:48:09.968 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：188,B_SourceLightType 2025-08-31 07:48:09.968 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：188,A_SourceLightType 2025-08-31 07:48:10.134 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;188/265, 2025-08-31 07:48:10.143 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:10.199 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:10.347 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:10 2025-08-31 07:48:10.365 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:10 2025-08-31 07:48:10.450 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:10.452 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":188,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_188_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:10.536 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 189 2025-08-31 07:48:10.536 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 189 2025-08-31 07:48:10.536 [Thd =265] Info Default 开始扫描条带； [189/265] 2025-08-31 07:48:10.545 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:48:10.548 [Thd =202] Info Default ***row:189, vectorBeginX:-71.504, vectorBeginY:-22.305, captureBeginX:-69.885, captureBeginY:-22.305, captureEndX:69.394, captureEndY:-22.305, vectorEndX:71.296, vectorEndY:-22.305 2025-08-31 07:48:10.548 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:10.550 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8847393264089,EndPoint:-69.3941329623277 2025-08-31 07:48:10.969 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:10.971 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":188,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_188_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:15.371 [Thd =34] Info Default Stripes are collected for data processing！strip_no:189 2025-08-31 07:48:15.371 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:15.371 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:15.372 [Thd =33] Info Default Stripes are collected for data processing！strip_no:189 2025-08-31 07:48:15.372 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:15.372 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:A_SourceLightType 2025-08-31 07:48:15.372 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,A_SourceLightType 2025-08-31 07:48:15.372 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,B_SourceLightType 2025-08-31 07:48:15.372 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:B_SourceLightType 2025-08-31 07:48:15.553 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;189/265, 2025-08-31 07:48:15.562 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:15.598 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:15.869 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:15.871 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_189_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:15.944 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 190 2025-08-31 07:48:15.944 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 190 2025-08-31 07:48:15.945 [Thd =338] Info Default 开始扫描条带； [190/265] 2025-08-31 07:48:15.954 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:48:15.957 [Thd =202] Info Default CaptureBeginX: 69.73158, CaptureBeginY:-22.73347, CaptureEndX:-69.54730, CaptureEndY:-22.73347, VectorBeginX:71.29646, VectorBeginY:-22.73347, VectorEndX:-71.50379, VectorEndY:-22.73347, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:48:15.957 [Thd =202] Info Default ***row:190, vectorBeginX:71.296, vectorBeginY:-22.733, captureBeginX:69.732, captureBeginY:-22.733, captureEndX:-69.547, captureEndY:-22.733, vectorEndX:-71.504, vectorEndY:-22.733 2025-08-31 07:48:15.957 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:15.959 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.731575408655,EndPoint:69.5472968800816 2025-08-31 07:48:16.405 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:16 2025-08-31 07:48:16.414 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:16.416 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_189_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:16.421 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:16 2025-08-31 07:48:20.777 [Thd =34] Info Default Stripes are collected for data processing！strip_no:190 2025-08-31 07:48:20.777 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:20.777 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:20.778 [Thd =33] Info Default Stripes are collected for data processing！strip_no:190 2025-08-31 07:48:20.778 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:20.778 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:A_SourceLightType 2025-08-31 07:48:20.778 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:B_SourceLightType 2025-08-31 07:48:20.778 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,A_SourceLightType 2025-08-31 07:48:20.778 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,B_SourceLightType 2025-08-31 07:48:20.950 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;190/265, 2025-08-31 07:48:20.951 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:20 2025-08-31 07:48:20.967 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:20.984 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:20 2025-08-31 07:48:21.019 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:21.276 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:21.278 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_190_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:21.367 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 191 2025-08-31 07:48:21.367 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 191 2025-08-31 07:48:21.367 [Thd =340] Info Default 开始扫描条带； [191/265] 2025-08-31 07:48:21.376 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:48:21.379 [Thd =202] Info Default ***row:191, vectorBeginX:-71.504, vectorBeginY:-23.162, captureBeginX:-69.885, captureBeginY:-23.162, captureEndX:69.394, captureEndY:-23.162, vectorEndX:71.296, vectorEndY:-23.162 2025-08-31 07:48:21.379 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:21.381 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8846990432058,EndPoint:-69.3941732455309 2025-08-31 07:48:21.777 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:21.779 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_190_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:26.370 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;191/265, 2025-08-31 07:48:26.414 [Thd =34] Info Default Stripes are collected for data processing！strip_no:191 2025-08-31 07:48:26.414 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:26.415 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:26.603 [Thd =33] Info Default Stripes are collected for data processing！strip_no:191 2025-08-31 07:48:26.603 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:26.604 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:A_SourceLightType 2025-08-31 07:48:26.604 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:B_SourceLightType 2025-08-31 07:48:26.604 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,A_SourceLightType 2025-08-31 07:48:26.604 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,B_SourceLightType 2025-08-31 07:48:26.612 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:26.660 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:27.013 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 192 2025-08-31 07:48:27.013 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 192 2025-08-31 07:48:27.013 [Thd =311] Info Default 开始扫描条带； [192/265] 2025-08-31 07:48:27.022 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:48:27.025 [Thd =202] Info Default CaptureBeginX: 69.73160, CaptureBeginY:-23.59009, CaptureEndX:-69.54727, CaptureEndY:-23.59009, VectorBeginX:71.29649, VectorBeginY:-23.59009, VectorEndX:-71.50376, VectorEndY:-23.59009, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:48:27.025 [Thd =202] Info Default ***row:192, vectorBeginX:71.296, vectorBeginY:-23.590, captureBeginX:69.732, captureBeginY:-23.590, captureEndX:-69.547, captureEndY:-23.590, vectorEndX:-71.504, vectorEndY:-23.590 2025-08-31 07:48:27.025 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:27.027 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7316014706667,EndPoint:69.5472708180699 2025-08-31 07:48:27.097 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:27.099 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_191_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:27.641 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:27.643 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_191_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:28.507 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:28 2025-08-31 07:48:28.520 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:28 2025-08-31 07:48:31.845 [Thd =34] Info Default Stripes are collected for data processing！strip_no:192 2025-08-31 07:48:31.845 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:31.845 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:31.845 [Thd =33] Info Default Stripes are collected for data processing！strip_no:192 2025-08-31 07:48:31.845 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:31.846 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:A_SourceLightType 2025-08-31 07:48:31.846 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:B_SourceLightType 2025-08-31 07:48:31.846 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,A_SourceLightType 2025-08-31 07:48:31.846 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,B_SourceLightType 2025-08-31 07:48:32.021 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;192/265, 2025-08-31 07:48:32.031 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:32.143 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:32.338 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:32.340 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_192_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:32.484 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 193 2025-08-31 07:48:32.484 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 193 2025-08-31 07:48:32.484 [Thd =193] Info Default 开始扫描条带； [193/265] 2025-08-31 07:48:32.493 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:48:32.496 [Thd =202] Info Default ***row:193, vectorBeginX:-71.504, vectorBeginY:-24.018, captureBeginX:-69.885, captureBeginY:-24.018, captureEndX:69.394, captureEndY:-24.018, vectorEndX:71.297, vectorEndY:-24.018 2025-08-31 07:48:32.496 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:32.498 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8846843947683,EndPoint:-69.3941878939684 2025-08-31 07:48:32.851 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:32.862 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_192_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:33.541 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:33 2025-08-31 07:48:33.552 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:33 2025-08-31 07:48:37.343 [Thd =34] Info Default Stripes are collected for data processing！strip_no:193 2025-08-31 07:48:37.343 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:37.344 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:37.344 [Thd =33] Info Default Stripes are collected for data processing！strip_no:193 2025-08-31 07:48:37.344 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:37.344 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:A_SourceLightType 2025-08-31 07:48:37.344 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:B_SourceLightType 2025-08-31 07:48:37.344 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,A_SourceLightType 2025-08-31 07:48:37.345 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,B_SourceLightType 2025-08-31 07:48:37.499 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;193/265, 2025-08-31 07:48:37.508 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:37.566 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:37.832 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:37.835 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_193_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:37.905 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 194 2025-08-31 07:48:37.905 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 194 2025-08-31 07:48:37.905 [Thd =338] Info Default 开始扫描条带； [194/265] 2025-08-31 07:48:37.914 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:48:37.917 [Thd =202] Info Default CaptureBeginX: 69.73164, CaptureBeginY:-24.44671, CaptureEndX:-69.54723, CaptureEndY:-24.44671, VectorBeginX:71.29653, VectorBeginY:-24.44671, VectorEndX:-71.50372, VectorEndY:-24.44671, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:48:37.917 [Thd =202] Info Default ***row:194, vectorBeginX:71.297, vectorBeginY:-24.447, captureBeginX:69.732, captureBeginY:-24.447, captureEndX:-69.547, captureEndY:-24.447, vectorEndX:-71.504, vectorEndY:-24.447 2025-08-31 07:48:37.917 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:37.919 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7316424862917,EndPoint:69.5472298024449 2025-08-31 07:48:38.081 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:38 2025-08-31 07:48:38.094 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:38 2025-08-31 07:48:38.338 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:38.359 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_193_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:42.739 [Thd =33] Info Default Stripes are collected for data processing！strip_no:194 2025-08-31 07:48:42.739 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:42.739 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:42.744 [Thd =34] Info Default Stripes are collected for data processing！strip_no:194 2025-08-31 07:48:42.745 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:42.745 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:B_SourceLightType 2025-08-31 07:48:42.745 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:A_SourceLightType 2025-08-31 07:48:42.745 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,B_SourceLightType 2025-08-31 07:48:42.745 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,A_SourceLightType 2025-08-31 07:48:42.919 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;194/265, 2025-08-31 07:48:42.928 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:42.977 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:43.129 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:43 2025-08-31 07:48:43.147 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:43 2025-08-31 07:48:43.239 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:43.241 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_194_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:43.314 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 195 2025-08-31 07:48:43.314 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 195 2025-08-31 07:48:43.314 [Thd =322] Info Default 开始扫描条带； [195/265] 2025-08-31 07:48:43.343 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:48:43.346 [Thd =202] Info Default ***row:195, vectorBeginX:-71.504, vectorBeginY:-24.875, captureBeginX:-69.885, captureBeginY:-24.875, captureEndX:69.394, captureEndY:-24.875, vectorEndX:71.297, vectorEndY:-24.875 2025-08-31 07:48:43.346 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:43.348 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8846333693777,EndPoint:-69.394238919359 2025-08-31 07:48:43.745 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:43.747 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_194_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:48.171 [Thd =34] Info Default Stripes are collected for data processing！strip_no:195 2025-08-31 07:48:48.171 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:48.171 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:48.171 [Thd =33] Info Default Stripes are collected for data processing！strip_no:195 2025-08-31 07:48:48.172 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:48.172 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:A_SourceLightType 2025-08-31 07:48:48.172 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:B_SourceLightType 2025-08-31 07:48:48.172 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,A_SourceLightType 2025-08-31 07:48:48.172 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,B_SourceLightType 2025-08-31 07:48:48.364 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;195/265, 2025-08-31 07:48:48.374 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:48.421 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:48.676 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:48.678 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:48 2025-08-31 07:48:48.678 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_195_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:48.689 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:48 2025-08-31 07:48:48.773 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 196 2025-08-31 07:48:48.773 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 196 2025-08-31 07:48:48.773 [Thd =322] Info Default 开始扫描条带； [196/265] 2025-08-31 07:48:48.782 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:48:48.785 [Thd =202] Info Default CaptureBeginX: 69.73165, CaptureBeginY:-25.30332, CaptureEndX:-69.54722, CaptureEndY:-25.30332, VectorBeginX:71.29654, VectorBeginY:-25.30332, VectorEndX:-71.50371, VectorEndY:-25.30332, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:48:48.785 [Thd =202] Info Default ***row:196, vectorBeginX:71.297, vectorBeginY:-25.303, captureBeginX:69.732, captureBeginY:-25.303, captureEndX:-69.547, captureEndY:-25.303, vectorEndX:-71.504, vectorEndY:-25.303 2025-08-31 07:48:48.785 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:48.787 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7316532895144,EndPoint:69.5472189992223 2025-08-31 07:48:49.182 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:49.184 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_195_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:53.612 [Thd =33] Info Default Stripes are collected for data processing！strip_no:196 2025-08-31 07:48:53.613 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:53.613 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:53.613 [Thd =34] Info Default Stripes are collected for data processing！strip_no:196 2025-08-31 07:48:53.613 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:53.614 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:B_SourceLightType 2025-08-31 07:48:53.614 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:A_SourceLightType 2025-08-31 07:48:53.614 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,B_SourceLightType 2025-08-31 07:48:53.614 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,A_SourceLightType 2025-08-31 07:48:53.719 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:53 2025-08-31 07:48:53.756 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:53 2025-08-31 07:48:53.779 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;196/265, 2025-08-31 07:48:53.788 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:53.827 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:54.095 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:54.098 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_196_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:54.179 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 197 2025-08-31 07:48:54.179 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 197 2025-08-31 07:48:54.179 [Thd =215] Info Default 开始扫描条带； [197/265] 2025-08-31 07:48:54.198 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:48:54.200 [Thd =202] Info Default ***row:197, vectorBeginX:-71.504, vectorBeginY:-25.732, captureBeginX:-69.885, captureBeginY:-25.732, captureEndX:69.394, captureEndY:-25.732, vectorEndX:71.297, vectorEndY:-25.732 2025-08-31 07:48:54.201 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:54.203 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8846321486745,EndPoint:-69.3942401400621 2025-08-31 07:48:54.605 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:48:54.626 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_196_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:59.028 [Thd =33] Info Default Stripes are collected for data processing！strip_no:197 2025-08-31 07:48:59.028 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:197,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:59.028 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:48:59.031 [Thd =34] Info Default Stripes are collected for data processing！strip_no:197 2025-08-31 07:48:59.032 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:197,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:48:59.032 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:197,source_light_Type:B_SourceLightType 2025-08-31 07:48:59.032 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:197,source_light_Type:A_SourceLightType 2025-08-31 07:48:59.032 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：197,B_SourceLightType 2025-08-31 07:48:59.032 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：197,A_SourceLightType 2025-08-31 07:48:59.211 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;197/265, 2025-08-31 07:48:59.220 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:48:59.263 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:48:59.527 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:48:59.529 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":197,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_197_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:48:59.603 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 198 2025-08-31 07:48:59.603 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 198 2025-08-31 07:48:59.603 [Thd =261] Info Default 开始扫描条带； [198/265] 2025-08-31 07:48:59.612 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:48:59.615 [Thd =202] Info Default CaptureBeginX: 69.73168, CaptureBeginY:-26.15994, CaptureEndX:-69.54719, CaptureEndY:-26.15994, VectorBeginX:71.29657, VectorBeginY:-26.15994, VectorEndX:-71.50368, VectorEndY:-26.15994, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:48:59.615 [Thd =202] Info Default ***row:198, vectorBeginX:71.297, vectorBeginY:-26.160, captureBeginX:69.732, captureBeginY:-26.160, captureEndX:-69.547, captureEndY:-26.160, vectorEndX:-71.504, vectorEndY:-26.160 2025-08-31 07:48:59.615 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:48:59.617 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7316834408816,EndPoint:69.5471888478551 2025-08-31 07:48:59.793 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:48:59 2025-08-31 07:48:59.805 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:48:59 2025-08-31 07:49:00.052 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:00.055 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":197,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_197_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:04.332 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:04 2025-08-31 07:49:04.345 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:04 2025-08-31 07:49:04.436 [Thd =34] Info Default Stripes are collected for data processing！strip_no:198 2025-08-31 07:49:04.436 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:198,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:04.436 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:04.436 [Thd =33] Info Default Stripes are collected for data processing！strip_no:198 2025-08-31 07:49:04.437 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:198,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:04.437 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:198,source_light_Type:A_SourceLightType 2025-08-31 07:49:04.437 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:198,source_light_Type:B_SourceLightType 2025-08-31 07:49:04.437 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：198,A_SourceLightType 2025-08-31 07:49:04.437 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：198,B_SourceLightType 2025-08-31 07:49:04.616 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;198/265, 2025-08-31 07:49:04.636 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:04.677 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:04.925 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:04.928 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":198,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_198_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:05.013 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 199 2025-08-31 07:49:05.013 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 199 2025-08-31 07:49:05.013 [Thd =311] Info Default 开始扫描条带； [199/265] 2025-08-31 07:49:05.022 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:49:05.025 [Thd =202] Info Default ***row:199, vectorBeginX:-71.504, vectorBeginY:-26.588, captureBeginX:-69.885, captureBeginY:-26.588, captureEndX:69.394, captureEndY:-26.588, vectorEndX:71.297, vectorEndY:-26.588 2025-08-31 07:49:05.025 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:05.026 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8846007766042,EndPoint:-69.3942715121324 2025-08-31 07:49:05.454 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:05.457 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":198,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_198_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:09.845 [Thd =34] Info Default Stripes are collected for data processing！strip_no:199 2025-08-31 07:49:09.845 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:199,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:09.846 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:09.846 [Thd =33] Info Default Stripes are collected for data processing！strip_no:199 2025-08-31 07:49:09.846 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:199,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:09.846 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:199,source_light_Type:A_SourceLightType 2025-08-31 07:49:09.846 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:199,source_light_Type:B_SourceLightType 2025-08-31 07:49:09.846 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：199,A_SourceLightType 2025-08-31 07:49:09.846 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：199,B_SourceLightType 2025-08-31 07:49:09.871 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:09 2025-08-31 07:49:09.891 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:09 2025-08-31 07:49:10.019 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;199/265, 2025-08-31 07:49:10.028 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:10.105 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:10.330 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:10.332 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":199,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_199_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:10.444 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 200 2025-08-31 07:49:10.444 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 200 2025-08-31 07:49:10.444 [Thd =299] Info Default 开始扫描条带； [200/265] 2025-08-31 07:49:10.453 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:49:10.456 [Thd =202] Info Default CaptureBeginX: 69.73172, CaptureBeginY:-27.01656, CaptureEndX:-69.54716, CaptureEndY:-27.01656, VectorBeginX:71.29660, VectorBeginY:-27.01656, VectorEndX:-71.50365, VectorEndY:-27.01656, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:49:10.456 [Thd =202] Info Default ***row:200, vectorBeginX:71.297, vectorBeginY:-27.017, captureBeginX:69.732, captureBeginY:-27.017, captureEndX:-69.547, captureEndY:-27.017, vectorEndX:-71.504, vectorEndY:-27.017 2025-08-31 07:49:10.456 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:10.457 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7317154843386,EndPoint:69.547156804398 2025-08-31 07:49:10.832 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:10.835 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":199,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_199_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:14.924 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:14 2025-08-31 07:49:14.945 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:14 2025-08-31 07:49:15.275 [Thd =34] Info Default Stripes are collected for data processing！strip_no:200 2025-08-31 07:49:15.276 [Thd =33] Info Default Stripes are collected for data processing！strip_no:200 2025-08-31 07:49:15.276 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:200,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:15.276 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:15.276 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:200,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:15.276 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:200,source_light_Type:B_SourceLightType 2025-08-31 07:49:15.276 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:200,source_light_Type:A_SourceLightType 2025-08-31 07:49:15.276 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：200,B_SourceLightType 2025-08-31 07:49:15.276 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：200,A_SourceLightType 2025-08-31 07:49:15.456 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;200/265, 2025-08-31 07:49:15.465 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:15.573 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:15.761 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:15.763 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":200,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_200_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:15.914 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 201 2025-08-31 07:49:15.914 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 201 2025-08-31 07:49:15.914 [Thd =338] Info Default 开始扫描条带； [201/265] 2025-08-31 07:49:15.931 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:49:15.933 [Thd =202] Info Default ***row:201, vectorBeginX:-71.504, vectorBeginY:-27.445, captureBeginX:-69.885, captureBeginY:-27.445, captureEndX:69.394, captureEndY:-27.445, vectorEndX:71.297, vectorEndY:-27.445 2025-08-31 07:49:15.933 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:15.935 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8845750808034,EndPoint:-69.3942972079332 2025-08-31 07:49:16.277 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:16.279 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":200,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_200_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:20.775 [Thd =33] Info Default Stripes are collected for data processing！strip_no:201 2025-08-31 07:49:20.775 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:201,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:20.775 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:20.778 [Thd =34] Info Default Stripes are collected for data processing！strip_no:201 2025-08-31 07:49:20.778 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:201,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:20.778 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:201,source_light_Type:B_SourceLightType 2025-08-31 07:49:20.778 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:201,source_light_Type:A_SourceLightType 2025-08-31 07:49:20.778 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：201,B_SourceLightType 2025-08-31 07:49:20.778 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：201,A_SourceLightType 2025-08-31 07:49:20.950 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;201/265, 2025-08-31 07:49:20.959 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:20.999 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:21.274 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:21.276 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":201,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_201_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:21.352 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 202 2025-08-31 07:49:21.352 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 202 2025-08-31 07:49:21.352 [Thd =340] Info Default 开始扫描条带； [202/265] 2025-08-31 07:49:21.361 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:49:21.364 [Thd =202] Info Default CaptureBeginX: 69.73174, CaptureBeginY:-27.87317, CaptureEndX:-69.54713, CaptureEndY:-27.87317, VectorBeginX:71.29663, VectorBeginY:-27.87317, VectorEndX:-71.50362, VectorEndY:-27.87317, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:49:21.364 [Thd =202] Info Default ***row:202, vectorBeginX:71.297, vectorBeginY:-27.873, captureBeginX:69.732, captureBeginY:-27.873, captureEndX:-69.547, captureEndY:-27.873, vectorEndX:-71.504, vectorEndY:-27.873 2025-08-31 07:49:21.364 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:21.365 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7317421567019,EndPoint:69.5471301320348 2025-08-31 07:49:21.490 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:21 2025-08-31 07:49:21.573 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:21 2025-08-31 07:49:21.810 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:21.813 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":201,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_201_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:26.115 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:26 2025-08-31 07:49:26.128 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:26 2025-08-31 07:49:26.186 [Thd =33] Info Default Stripes are collected for data processing！strip_no:202 2025-08-31 07:49:26.186 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:202,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:26.186 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:26.188 [Thd =34] Info Default Stripes are collected for data processing！strip_no:202 2025-08-31 07:49:26.189 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:202,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:26.189 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:202,source_light_Type:B_SourceLightType 2025-08-31 07:49:26.189 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:202,source_light_Type:A_SourceLightType 2025-08-31 07:49:26.189 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：202,B_SourceLightType 2025-08-31 07:49:26.189 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：202,A_SourceLightType 2025-08-31 07:49:26.362 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;202/265, 2025-08-31 07:49:26.371 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:26.490 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:26.691 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:26.693 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":202,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_202_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:26.828 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 203 2025-08-31 07:49:26.828 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 203 2025-08-31 07:49:26.828 [Thd =302] Info Default 开始扫描条带； [203/265] 2025-08-31 07:49:26.837 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:49:26.840 [Thd =202] Info Default ***row:203, vectorBeginX:-71.504, vectorBeginY:-28.301, captureBeginX:-69.885, captureBeginY:-28.301, captureEndX:69.394, captureEndY:-28.301, vectorEndX:71.297, vectorEndY:-28.301 2025-08-31 07:49:26.840 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:26.842 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8845359572683,EndPoint:-69.3943363314684 2025-08-31 07:49:27.193 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:27.195 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":202,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_202_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:31.665 [Thd =34] Info Default Stripes are collected for data processing！strip_no:203 2025-08-31 07:49:31.665 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:203,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:31.665 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:31.665 [Thd =33] Info Default Stripes are collected for data processing！strip_no:203 2025-08-31 07:49:31.666 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:203,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:31.666 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:203,source_light_Type:A_SourceLightType 2025-08-31 07:49:31.666 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:203,source_light_Type:B_SourceLightType 2025-08-31 07:49:31.666 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：203,A_SourceLightType 2025-08-31 07:49:31.666 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：203,B_SourceLightType 2025-08-31 07:49:31.857 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;203/265, 2025-08-31 07:49:31.867 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:31.911 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:32.161 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:32 2025-08-31 07:49:32.165 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:32.167 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":203,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_203_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:32.188 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:32 2025-08-31 07:49:32.249 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 204 2025-08-31 07:49:32.249 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 204 2025-08-31 07:49:32.249 [Thd =302] Info Default 开始扫描条带； [204/265] 2025-08-31 07:49:32.266 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:49:32.268 [Thd =202] Info Default CaptureBeginX: 69.73177, CaptureBeginY:-28.72980, CaptureEndX:-69.54711, CaptureEndY:-28.72980, VectorBeginX:71.29666, VectorBeginY:-28.72980, VectorEndX:-71.50359, VectorEndY:-28.72980, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:49:32.269 [Thd =202] Info Default ***row:204, vectorBeginX:71.297, vectorBeginY:-28.730, captureBeginX:69.732, captureBeginY:-28.730, captureEndX:-69.547, captureEndY:-28.730, vectorEndX:-71.504, vectorEndY:-28.730 2025-08-31 07:49:32.269 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:32.270 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7317666317995,EndPoint:69.5471056569371 2025-08-31 07:49:32.665 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:32.667 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":203,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_203_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:37.102 [Thd =34] Info Default Stripes are collected for data processing！strip_no:204 2025-08-31 07:49:37.102 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:204,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:37.102 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:37.102 [Thd =33] Info Default Stripes are collected for data processing！strip_no:204 2025-08-31 07:49:37.103 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:204,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:37.103 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:204,source_light_Type:A_SourceLightType 2025-08-31 07:49:37.103 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:204,source_light_Type:B_SourceLightType 2025-08-31 07:49:37.103 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：204,A_SourceLightType 2025-08-31 07:49:37.103 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：204,B_SourceLightType 2025-08-31 07:49:37.227 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:37 2025-08-31 07:49:37.281 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;204/265, 2025-08-31 07:49:37.290 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:37.292 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:37 2025-08-31 07:49:37.391 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:37.580 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:37.582 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":204,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_204_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:37.728 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 205 2025-08-31 07:49:37.728 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 205 2025-08-31 07:49:37.728 [Thd =261] Info Default 开始扫描条带； [205/265] 2025-08-31 07:49:37.744 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:49:37.746 [Thd =202] Info Default ***row:205, vectorBeginX:-71.504, vectorBeginY:-29.158, captureBeginX:-69.885, captureBeginY:-29.158, captureEndX:69.394, captureEndY:-29.158, vectorEndX:71.297, vectorEndY:-29.158 2025-08-31 07:49:37.746 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:37.749 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8845265578542,EndPoint:-69.3943457308824 2025-08-31 07:49:38.080 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:38.082 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":204,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_204_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:42.575 [Thd =34] Info Default Stripes are collected for data processing！strip_no:205 2025-08-31 07:49:42.575 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:205,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:42.575 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:42.576 [Thd =33] Info Default Stripes are collected for data processing！strip_no:205 2025-08-31 07:49:42.576 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:205,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:42.576 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:205,source_light_Type:A_SourceLightType 2025-08-31 07:49:42.576 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:205,source_light_Type:B_SourceLightType 2025-08-31 07:49:42.576 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：205,A_SourceLightType 2025-08-31 07:49:42.576 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：205,B_SourceLightType 2025-08-31 07:49:42.741 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;205/265, 2025-08-31 07:49:42.750 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:42.793 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:43.061 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:43.063 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":205,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_205_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:43.134 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 206 2025-08-31 07:49:43.134 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 206 2025-08-31 07:49:43.134 [Thd =311] Info Default 开始扫描条带； [206/265] 2025-08-31 07:49:43.143 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:49:43.146 [Thd =202] Info Default CaptureBeginX: 69.73180, CaptureBeginY:-29.58642, CaptureEndX:-69.54707, CaptureEndY:-29.58642, VectorBeginX:71.29669, VectorBeginY:-29.58642, VectorEndX:-71.50356, VectorEndY:-29.58642, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:49:43.146 [Thd =202] Info Default ***row:206, vectorBeginX:71.297, vectorBeginY:-29.586, captureBeginX:69.732, captureBeginY:-29.586, captureEndX:-69.547, captureEndY:-29.586, vectorEndX:-71.504, vectorEndY:-29.586 2025-08-31 07:49:43.146 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:43.148 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7318009335573,EndPoint:69.5470713551793 2025-08-31 07:49:43.342 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:43 2025-08-31 07:49:43.354 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:43 2025-08-31 07:49:43.578 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:43.580 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":205,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_205_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:47.885 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:47 2025-08-31 07:49:47.908 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:47 2025-08-31 07:49:47.971 [Thd =34] Info Default Stripes are collected for data processing！strip_no:206 2025-08-31 07:49:47.972 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:206,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:47.972 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:47.972 [Thd =33] Info Default Stripes are collected for data processing！strip_no:206 2025-08-31 07:49:47.972 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:206,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:47.972 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:206,source_light_Type:A_SourceLightType 2025-08-31 07:49:47.973 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：206,A_SourceLightType 2025-08-31 07:49:47.973 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：206,B_SourceLightType 2025-08-31 07:49:47.973 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:206,source_light_Type:B_SourceLightType 2025-08-31 07:49:48.145 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;206/265, 2025-08-31 07:49:48.154 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:48.216 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:48.453 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:48.455 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":206,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_206_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:48.560 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 207 2025-08-31 07:49:48.560 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 207 2025-08-31 07:49:48.560 [Thd =320] Info Default 开始扫描条带； [207/265] 2025-08-31 07:49:48.570 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:49:48.572 [Thd =202] Info Default ***row:207, vectorBeginX:-71.504, vectorBeginY:-30.015, captureBeginX:-69.884, captureBeginY:-30.015, captureEndX:69.394, captureEndY:-30.015, vectorEndX:71.297, vectorEndY:-30.015 2025-08-31 07:49:48.573 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:48.574 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8844784621511,EndPoint:-69.3943938265855 2025-08-31 07:49:48.956 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:48.958 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":206,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_206_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:53.397 [Thd =34] Info Default Stripes are collected for data processing！strip_no:207 2025-08-31 07:49:53.397 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:207,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:53.398 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:53.398 [Thd =33] Info Default Stripes are collected for data processing！strip_no:207 2025-08-31 07:49:53.398 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:207,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:53.398 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:207,source_light_Type:A_SourceLightType 2025-08-31 07:49:53.398 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:207,source_light_Type:B_SourceLightType 2025-08-31 07:49:53.398 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：207,A_SourceLightType 2025-08-31 07:49:53.398 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：207,B_SourceLightType 2025-08-31 07:49:53.578 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;207/265, 2025-08-31 07:49:53.587 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:53.627 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:53.900 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:53.902 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":207,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_207_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:53.949 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:53 2025-08-31 07:49:53.961 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:53 2025-08-31 07:49:53.979 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 208 2025-08-31 07:49:53.993 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 208 2025-08-31 07:49:53.994 [Thd =290] Info Default 开始扫描条带； [208/265] 2025-08-31 07:49:54.004 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:49:54.007 [Thd =202] Info Default CaptureBeginX: 69.73183, CaptureBeginY:-30.44304, CaptureEndX:-69.54704, CaptureEndY:-30.44304, VectorBeginX:71.29672, VectorBeginY:-30.44304, VectorEndX:-71.50353, VectorEndY:-30.44304, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:49:54.007 [Thd =202] Info Default ***row:208, vectorBeginX:71.297, vectorBeginY:-30.443, captureBeginX:69.732, captureBeginY:-30.443, captureEndX:-69.547, captureEndY:-30.443, vectorEndX:-71.504, vectorEndY:-30.443 2025-08-31 07:49:54.007 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:54.009 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7318306576784,EndPoint:69.5470416310582 2025-08-31 07:49:54.404 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:54.406 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":207,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_207_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:58.845 [Thd =33] Info Default Stripes are collected for data processing！strip_no:208 2025-08-31 07:49:58.846 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:208,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:58.846 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:49:58.846 [Thd =34] Info Default Stripes are collected for data processing！strip_no:208 2025-08-31 07:49:58.846 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:208,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:49:58.846 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:208,source_light_Type:B_SourceLightType 2025-08-31 07:49:58.846 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:208,source_light_Type:A_SourceLightType 2025-08-31 07:49:58.846 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：208,B_SourceLightType 2025-08-31 07:49:58.847 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：208,A_SourceLightType 2025-08-31 07:49:58.994 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:49:58 2025-08-31 07:49:59.009 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;208/265, 2025-08-31 07:49:59.014 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:49:59 2025-08-31 07:49:59.018 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:49:59.098 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:49:59.331 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:49:59.333 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":208,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_208_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:49:59.434 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 209 2025-08-31 07:49:59.434 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 209 2025-08-31 07:49:59.434 [Thd =338] Info Default 开始扫描条带； [209/265] 2025-08-31 07:49:59.443 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:49:59.446 [Thd =202] Info Default ***row:209, vectorBeginX:-71.504, vectorBeginY:-30.871, captureBeginX:-69.884, captureBeginY:-30.871, captureEndX:69.394, captureEndY:-30.871, vectorEndX:71.297, vectorEndY:-30.871 2025-08-31 07:49:59.446 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:49:59.448 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8844572829519,EndPoint:-69.3944150057848 2025-08-31 07:49:59.837 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:49:59.840 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":208,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_208_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:04.280 [Thd =34] Info Default Stripes are collected for data processing！strip_no:209 2025-08-31 07:50:04.281 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:209,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:04.281 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:04.281 [Thd =33] Info Default Stripes are collected for data processing！strip_no:209 2025-08-31 07:50:04.281 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:209,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:04.281 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:209,source_light_Type:A_SourceLightType 2025-08-31 07:50:04.281 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:209,source_light_Type:B_SourceLightType 2025-08-31 07:50:04.281 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：209,A_SourceLightType 2025-08-31 07:50:04.282 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：209,B_SourceLightType 2025-08-31 07:50:04.441 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;209/265, 2025-08-31 07:50:04.450 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:04.501 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:04.552 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:04 2025-08-31 07:50:04.562 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:04 2025-08-31 07:50:04.764 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:04.766 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":209,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_209_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:04.838 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 210 2025-08-31 07:50:04.838 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 210 2025-08-31 07:50:04.838 [Thd =265] Info Default 开始扫描条带； [210/265] 2025-08-31 07:50:04.855 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:50:04.858 [Thd =202] Info Default CaptureBeginX: 69.73186, CaptureBeginY:-31.29966, CaptureEndX:-69.54702, CaptureEndY:-31.29966, VectorBeginX:71.29674, VectorBeginY:-31.29966, VectorEndX:-71.50351, VectorEndY:-31.29966, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:50:04.858 [Thd =202] Info Default ***row:210, vectorBeginX:71.297, vectorBeginY:-31.300, captureBeginX:69.732, captureBeginY:-31.300, captureEndX:-69.547, captureEndY:-31.300, vectorEndX:-71.504, vectorEndY:-31.300 2025-08-31 07:50:04.859 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:04.861 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7318553769167,EndPoint:69.5470169118199 2025-08-31 07:50:05.274 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:05.277 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":209,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_209_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:09.603 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:09 2025-08-31 07:50:09.616 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:09 2025-08-31 07:50:09.696 [Thd =34] Info Default Stripes are collected for data processing！strip_no:210 2025-08-31 07:50:09.696 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:210,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:09.697 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:09.697 [Thd =33] Info Default Stripes are collected for data processing！strip_no:210 2025-08-31 07:50:09.697 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:210,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:09.697 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:210,source_light_Type:A_SourceLightType 2025-08-31 07:50:09.697 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:210,source_light_Type:B_SourceLightType 2025-08-31 07:50:09.697 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：210,A_SourceLightType 2025-08-31 07:50:09.697 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：210,B_SourceLightType 2025-08-31 07:50:09.877 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;210/265, 2025-08-31 07:50:09.886 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:09.968 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:10.192 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:10.194 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":210,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_210_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:10.320 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 211 2025-08-31 07:50:10.320 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 211 2025-08-31 07:50:10.320 [Thd =321] Info Default 开始扫描条带； [211/265] 2025-08-31 07:50:10.334 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:50:10.337 [Thd =202] Info Default ***row:211, vectorBeginX:-71.503, vectorBeginY:-31.728, captureBeginX:-69.884, captureBeginY:-31.728, captureEndX:69.394, captureEndY:-31.728, vectorEndX:71.297, vectorEndY:-31.728 2025-08-31 07:50:10.337 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:10.340 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8844235915456,EndPoint:-69.394448697191 2025-08-31 07:50:10.708 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:10.710 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":210,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_210_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:15.162 [Thd =33] Info Default Stripes are collected for data processing！strip_no:211 2025-08-31 07:50:15.162 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:211,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:15.162 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:15.166 [Thd =34] Info Default Stripes are collected for data processing！strip_no:211 2025-08-31 07:50:15.166 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:211,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:15.166 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:211,source_light_Type:B_SourceLightType 2025-08-31 07:50:15.166 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:211,source_light_Type:A_SourceLightType 2025-08-31 07:50:15.166 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：211,B_SourceLightType 2025-08-31 07:50:15.167 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：211,A_SourceLightType 2025-08-31 07:50:15.348 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;211/265, 2025-08-31 07:50:15.357 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:15.408 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:15.654 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:15 2025-08-31 07:50:15.660 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:15.663 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":211,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_211_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:15.678 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:15 2025-08-31 07:50:15.760 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 212 2025-08-31 07:50:15.760 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 212 2025-08-31 07:50:15.760 [Thd =321] Info Default 开始扫描条带； [212/265] 2025-08-31 07:50:15.769 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:50:15.772 [Thd =202] Info Default CaptureBeginX: 69.73189, CaptureBeginY:-32.15628, CaptureEndX:-69.54698, CaptureEndY:-32.15628, VectorBeginX:71.29678, VectorBeginY:-32.15628, VectorEndX:-71.50347, VectorEndY:-32.15628, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:50:15.772 [Thd =202] Info Default ***row:212, vectorBeginX:71.297, vectorBeginY:-32.156, captureBeginX:69.732, captureBeginY:-32.156, captureEndX:-69.547, captureEndY:-32.156, vectorEndX:-71.503, vectorEndY:-32.156 2025-08-31 07:50:15.773 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:15.774 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7318947445925,EndPoint:69.5469775441441 2025-08-31 07:50:16.175 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:16.178 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":211,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_211_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:20.606 [Thd =34] Info Default Stripes are collected for data processing！strip_no:212 2025-08-31 07:50:20.606 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:212,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:20.607 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:20.607 [Thd =33] Info Default Stripes are collected for data processing！strip_no:212 2025-08-31 07:50:20.607 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:212,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:20.607 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:212,source_light_Type:A_SourceLightType 2025-08-31 07:50:20.607 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:212,source_light_Type:B_SourceLightType 2025-08-31 07:50:20.607 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：212,A_SourceLightType 2025-08-31 07:50:20.607 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：212,B_SourceLightType 2025-08-31 07:50:20.710 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:20 2025-08-31 07:50:20.747 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:20 2025-08-31 07:50:20.764 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;212/265, 2025-08-31 07:50:20.773 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:20.815 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:21.092 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:21.094 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":212,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_212_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:21.165 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 213 2025-08-31 07:50:21.165 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 213 2025-08-31 07:50:21.165 [Thd =340] Info Default 开始扫描条带； [213/265] 2025-08-31 07:50:21.174 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:50:21.177 [Thd =202] Info Default ***row:213, vectorBeginX:-71.503, vectorBeginY:-32.585, captureBeginX:-69.884, captureBeginY:-32.585, captureEndX:69.394, captureEndY:-32.585, vectorEndX:71.297, vectorEndY:-32.585 2025-08-31 07:50:21.177 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:21.180 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8843786696706,EndPoint:-69.394493619066 2025-08-31 07:50:21.606 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:21.608 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":212,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_212_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:25.999 [Thd =33] Info Default Stripes are collected for data processing！strip_no:213 2025-08-31 07:50:25.999 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:213,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:26.000 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:26.003 [Thd =34] Info Default Stripes are collected for data processing！strip_no:213 2025-08-31 07:50:26.003 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:213,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:26.003 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:213,source_light_Type:B_SourceLightType 2025-08-31 07:50:26.003 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:213,source_light_Type:A_SourceLightType 2025-08-31 07:50:26.003 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：213,B_SourceLightType 2025-08-31 07:50:26.003 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：213,A_SourceLightType 2025-08-31 07:50:26.171 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;213/265, 2025-08-31 07:50:26.180 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:26.239 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:26.499 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:26.501 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":213,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_213_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:26.592 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 214 2025-08-31 07:50:26.592 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 214 2025-08-31 07:50:26.592 [Thd =302] Info Default 开始扫描条带； [214/265] 2025-08-31 07:50:26.601 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:50:26.604 [Thd =202] Info Default CaptureBeginX: 69.73192, CaptureBeginY:-33.01289, CaptureEndX:-69.54695, CaptureEndY:-33.01289, VectorBeginX:71.29681, VectorBeginY:-33.01289, VectorEndX:-71.50344, VectorEndY:-33.01289, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:50:26.621 [Thd =202] Info Default ***row:214, vectorBeginX:71.297, vectorBeginY:-33.013, captureBeginX:69.732, captureBeginY:-33.013, captureEndX:-69.547, captureEndY:-33.013, vectorEndX:-71.503, vectorEndY:-33.013 2025-08-31 07:50:26.621 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:26.623 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7319223324831,EndPoint:69.5469499562535 2025-08-31 07:50:26.790 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:26 2025-08-31 07:50:26.800 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:26 2025-08-31 07:50:27.001 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:27.003 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":213,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_213_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:31.457 [Thd =34] Info Default Stripes are collected for data processing！strip_no:214 2025-08-31 07:50:31.457 [Thd =33] Info Default Stripes are collected for data processing！strip_no:214 2025-08-31 07:50:31.458 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:214,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:31.458 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:31.458 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:214,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:31.458 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:214,source_light_Type:B_SourceLightType 2025-08-31 07:50:31.458 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:214,source_light_Type:A_SourceLightType 2025-08-31 07:50:31.459 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：214,B_SourceLightType 2025-08-31 07:50:31.459 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：214,A_SourceLightType 2025-08-31 07:50:31.618 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;214/265, 2025-08-31 07:50:31.627 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:31.667 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:31.819 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:31 2025-08-31 07:50:31.839 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:31 2025-08-31 07:50:31.943 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:31.946 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":214,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_214_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:32.017 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 215 2025-08-31 07:50:32.017 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 215 2025-08-31 07:50:32.017 [Thd =265] Info Default 开始扫描条带； [215/265] 2025-08-31 07:50:32.026 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:50:32.029 [Thd =202] Info Default ***row:215, vectorBeginX:-71.503, vectorBeginY:-33.441, captureBeginX:-69.884, captureBeginY:-33.441, captureEndX:69.395, captureEndY:-33.441, vectorEndX:71.297, vectorEndY:-33.441 2025-08-31 07:50:32.029 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:32.030 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8843580397878,EndPoint:-69.3945142489488 2025-08-31 07:50:32.476 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:32.479 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":214,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_214_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:36.850 [Thd =33] Info Default Stripes are collected for data processing！strip_no:215 2025-08-31 07:50:36.851 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:215,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:36.851 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:36.852 [Thd =34] Info Default Stripes are collected for data processing！strip_no:215 2025-08-31 07:50:36.852 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:215,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:36.852 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:215,source_light_Type:B_SourceLightType 2025-08-31 07:50:36.852 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:215,source_light_Type:A_SourceLightType 2025-08-31 07:50:36.852 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：215,B_SourceLightType 2025-08-31 07:50:36.852 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：215,A_SourceLightType 2025-08-31 07:50:37.019 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;215/265, 2025-08-31 07:50:37.028 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:37.089 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:37.334 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:37.336 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":215,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_215_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:37.425 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 216 2025-08-31 07:50:37.425 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 216 2025-08-31 07:50:37.425 [Thd =265] Info Default 开始扫描条带； [216/265] 2025-08-31 07:50:37.434 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:50:37.437 [Thd =202] Info Default CaptureBeginX: 69.73195, CaptureBeginY:-33.86952, CaptureEndX:-69.54693, CaptureEndY:-33.86952, VectorBeginX:71.29684, VectorBeginY:-33.86952, VectorEndX:-71.50341, VectorEndY:-33.86952, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:50:37.437 [Thd =202] Info Default ***row:216, vectorBeginX:71.297, vectorBeginY:-33.870, captureBeginX:69.732, captureBeginY:-33.870, captureEndX:-69.547, captureEndY:-33.870, vectorEndX:-71.503, vectorEndY:-33.870 2025-08-31 07:50:37.438 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:37.440 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7319471737917,EndPoint:69.5469251149449 2025-08-31 07:50:37.855 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:37.858 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":215,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_215_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:37.878 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:37 2025-08-31 07:50:37.899 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:37 2025-08-31 07:50:42.258 [Thd =33] Info Default Stripes are collected for data processing！strip_no:216 2025-08-31 07:50:42.258 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:216,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:42.258 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:42.259 [Thd =34] Info Default Stripes are collected for data processing！strip_no:216 2025-08-31 07:50:42.259 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:216,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:42.259 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:216,source_light_Type:B_SourceLightType 2025-08-31 07:50:42.259 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:216,source_light_Type:A_SourceLightType 2025-08-31 07:50:42.259 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：216,B_SourceLightType 2025-08-31 07:50:42.259 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：216,A_SourceLightType 2025-08-31 07:50:42.438 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;216/265, 2025-08-31 07:50:42.444 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:42 2025-08-31 07:50:42.447 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:42.468 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:42 2025-08-31 07:50:42.507 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:42.745 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:42.748 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":216,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_216_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:42.845 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 217 2025-08-31 07:50:42.845 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 217 2025-08-31 07:50:42.845 [Thd =311] Info Default 开始扫描条带； [217/265] 2025-08-31 07:50:42.854 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:50:42.857 [Thd =202] Info Default ***row:217, vectorBeginX:-71.503, vectorBeginY:-34.298, captureBeginX:-69.884, captureBeginY:-34.298, captureEndX:69.395, captureEndY:-34.298, vectorEndX:71.297, vectorEndY:-34.298 2025-08-31 07:50:42.857 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:42.858 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8843137892995,EndPoint:-69.3945584994371 2025-08-31 07:50:43.252 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:43.255 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":216,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_216_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:47.678 [Thd =34] Info Default Stripes are collected for data processing！strip_no:217 2025-08-31 07:50:47.678 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:217,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:47.678 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:47.678 [Thd =33] Info Default Stripes are collected for data processing！strip_no:217 2025-08-31 07:50:47.678 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:217,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:47.678 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:217,source_light_Type:A_SourceLightType 2025-08-31 07:50:47.678 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:217,source_light_Type:B_SourceLightType 2025-08-31 07:50:47.678 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：217,A_SourceLightType 2025-08-31 07:50:47.678 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：217,B_SourceLightType 2025-08-31 07:50:47.851 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;217/265, 2025-08-31 07:50:47.861 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:47.928 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:48.170 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:48.173 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":217,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_217_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:48.267 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 218 2025-08-31 07:50:48.267 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 218 2025-08-31 07:50:48.267 [Thd =311] Info Default 开始扫描条带； [218/265] 2025-08-31 07:50:48.276 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:50:48.279 [Thd =202] Info Default CaptureBeginX: 69.73202, CaptureBeginY:-34.72614, CaptureEndX:-69.54686, CaptureEndY:-34.72614, VectorBeginX:71.29691, VectorBeginY:-34.72614, VectorEndX:-71.50335, VectorEndY:-34.72614, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:50:48.279 [Thd =202] Info Default ***row:218, vectorBeginX:71.297, vectorBeginY:-34.726, captureBeginX:69.732, captureBeginY:-34.726, captureEndX:-69.547, captureEndY:-34.726, vectorEndX:-71.503, vectorEndY:-34.726 2025-08-31 07:50:48.279 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:48.281 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.732015655237,EndPoint:69.5468566334996 2025-08-31 07:50:48.497 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:48 2025-08-31 07:50:48.517 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:48 2025-08-31 07:50:48.692 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:48.695 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":217,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_217_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:53.034 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:53 2025-08-31 07:50:53.046 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:53 2025-08-31 07:50:53.108 [Thd =34] Info Default Stripes are collected for data processing！strip_no:218 2025-08-31 07:50:53.108 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:218,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:53.108 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:53.108 [Thd =33] Info Default Stripes are collected for data processing！strip_no:218 2025-08-31 07:50:53.108 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:218,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:53.108 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:218,source_light_Type:A_SourceLightType 2025-08-31 07:50:53.108 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:218,source_light_Type:B_SourceLightType 2025-08-31 07:50:53.108 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：218,A_SourceLightType 2025-08-31 07:50:53.108 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：218,B_SourceLightType 2025-08-31 07:50:53.273 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;218/265, 2025-08-31 07:50:53.282 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:53.365 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:53.588 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:53.591 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":218,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_218_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:53.715 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 219 2025-08-31 07:50:53.715 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 219 2025-08-31 07:50:53.715 [Thd =215] Info Default 开始扫描条带； [219/265] 2025-08-31 07:50:53.724 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:50:53.727 [Thd =202] Info Default ***row:219, vectorBeginX:-71.503, vectorBeginY:-35.154, captureBeginX:-69.884, captureBeginY:-35.154, captureEndX:69.395, captureEndY:-35.154, vectorEndX:71.297, vectorEndY:-35.154 2025-08-31 07:50:53.727 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:53.730 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8842659987722,EndPoint:-69.3946062899645 2025-08-31 07:50:54.092 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:54.095 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":218,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_218_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:58.549 [Thd =34] Info Default Stripes are collected for data processing！strip_no:219 2025-08-31 07:50:58.550 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:219,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:58.550 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:50:58.550 [Thd =33] Info Default Stripes are collected for data processing！strip_no:219 2025-08-31 07:50:58.550 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:219,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:50:58.550 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:219,source_light_Type:A_SourceLightType 2025-08-31 07:50:58.550 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:219,source_light_Type:B_SourceLightType 2025-08-31 07:50:58.550 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：219,A_SourceLightType 2025-08-31 07:50:58.550 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：219,B_SourceLightType 2025-08-31 07:50:58.717 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;219/265, 2025-08-31 07:50:58.736 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:50:58.811 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:50:59.054 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:50:59.056 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":219,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_219_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:50:59.098 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:50:59 2025-08-31 07:50:59.112 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:50:59 2025-08-31 07:50:59.161 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 220 2025-08-31 07:50:59.162 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 220 2025-08-31 07:50:59.162 [Thd =299] Info Default 开始扫描条带； [220/265] 2025-08-31 07:50:59.171 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:50:59.173 [Thd =202] Info Default CaptureBeginX: 69.73202, CaptureBeginY:-35.58275, CaptureEndX:-69.54685, CaptureEndY:-35.58275, VectorBeginX:71.29691, VectorBeginY:-35.58275, VectorEndX:-71.50334, VectorEndY:-35.58275, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:50:59.173 [Thd =202] Info Default ***row:220, vectorBeginX:71.297, vectorBeginY:-35.583, captureBeginX:69.732, captureBeginY:-35.583, captureEndX:-69.547, captureEndY:-35.583, vectorEndX:-71.503, vectorEndY:-35.583 2025-08-31 07:50:59.173 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:50:59.175 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7320242001589,EndPoint:69.5468480885777 2025-08-31 07:50:59.554 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:50:59.557 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":219,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_219_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:04.001 [Thd =34] Info Default Stripes are collected for data processing！strip_no:220 2025-08-31 07:51:04.001 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:220,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:04.001 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:04.001 [Thd =33] Info Default Stripes are collected for data processing！strip_no:220 2025-08-31 07:51:04.001 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:220,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:04.001 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:220,source_light_Type:A_SourceLightType 2025-08-31 07:51:04.001 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：220,A_SourceLightType 2025-08-31 07:51:04.002 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：220,B_SourceLightType 2025-08-31 07:51:04.002 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:220,source_light_Type:B_SourceLightType 2025-08-31 07:51:04.144 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:04 2025-08-31 07:51:04.157 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:04 2025-08-31 07:51:04.164 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;220/265, 2025-08-31 07:51:04.174 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:04.247 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:04.488 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:04.490 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":220,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_220_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:04.590 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 221 2025-08-31 07:51:04.590 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 221 2025-08-31 07:51:04.590 [Thd =193] Info Default 开始扫描条带； [221/265] 2025-08-31 07:51:04.599 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:51:04.602 [Thd =202] Info Default ***row:221, vectorBeginX:-71.503, vectorBeginY:-36.011, captureBeginX:-69.884, captureBeginY:-36.011, captureEndX:69.395, captureEndY:-36.011, vectorEndX:71.297, vectorEndY:-36.011 2025-08-31 07:51:04.602 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:04.604 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8842634963308,EndPoint:-69.3946087924059 2025-08-31 07:51:05.004 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:05.005 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":220,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_220_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:09.424 [Thd =33] Info Default Stripes are collected for data processing！strip_no:221 2025-08-31 07:51:09.424 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:221,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:09.424 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:09.424 [Thd =34] Info Default Stripes are collected for data processing！strip_no:221 2025-08-31 07:51:09.425 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:221,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:09.425 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:221,source_light_Type:B_SourceLightType 2025-08-31 07:51:09.425 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:221,source_light_Type:A_SourceLightType 2025-08-31 07:51:09.425 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：221,B_SourceLightType 2025-08-31 07:51:09.425 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：221,A_SourceLightType 2025-08-31 07:51:09.595 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;221/265, 2025-08-31 07:51:09.604 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:09.648 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:09.918 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:09.920 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":221,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_221_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:09.989 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 222 2025-08-31 07:51:09.989 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 222 2025-08-31 07:51:09.989 [Thd =322] Info Default 开始扫描条带； [222/265] 2025-08-31 07:51:09.998 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:51:10.001 [Thd =202] Info Default CaptureBeginX: 69.73204, CaptureBeginY:-36.43937, CaptureEndX:-69.54683, CaptureEndY:-36.43937, VectorBeginX:71.29693, VectorBeginY:-36.43937, VectorEndX:-71.50332, VectorEndY:-36.43937, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:51:10.001 [Thd =202] Info Default ***row:222, vectorBeginX:71.297, vectorBeginY:-36.439, captureBeginX:69.732, captureBeginY:-36.439, captureEndX:-69.547, captureEndY:-36.439, vectorEndX:-71.503, vectorEndY:-36.439 2025-08-31 07:51:10.001 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:10.003 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7320435483034,EndPoint:69.5468287404332 2025-08-31 07:51:10.185 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:10 2025-08-31 07:51:10.196 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:10 2025-08-31 07:51:10.425 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:10.427 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":221,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_221_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:14.714 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:14 2025-08-31 07:51:14.734 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:14 2025-08-31 07:51:14.843 [Thd =33] Info Default Stripes are collected for data processing！strip_no:222 2025-08-31 07:51:14.843 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:222,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:14.843 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:14.843 [Thd =34] Info Default Stripes are collected for data processing！strip_no:222 2025-08-31 07:51:14.844 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:222,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:14.844 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:222,source_light_Type:B_SourceLightType 2025-08-31 07:51:14.844 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:222,source_light_Type:A_SourceLightType 2025-08-31 07:51:14.844 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：222,B_SourceLightType 2025-08-31 07:51:14.844 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：222,A_SourceLightType 2025-08-31 07:51:15.010 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;222/265, 2025-08-31 07:51:15.019 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:15.061 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:15.325 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:15.327 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":222,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_222_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:15.399 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 223 2025-08-31 07:51:15.399 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 223 2025-08-31 07:51:15.399 [Thd =311] Info Default 开始扫描条带； [223/265] 2025-08-31 07:51:15.424 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:51:15.427 [Thd =202] Info Default ***row:223, vectorBeginX:-71.503, vectorBeginY:-36.868, captureBeginX:-69.884, captureBeginY:-36.868, captureEndX:69.395, captureEndY:-36.868, vectorEndX:71.297, vectorEndY:-36.868 2025-08-31 07:51:15.427 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:15.429 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8842226027761,EndPoint:-69.3946496859605 2025-08-31 07:51:15.827 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:15.830 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":222,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_222_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:20.254 [Thd =34] Info Default Stripes are collected for data processing！strip_no:223 2025-08-31 07:51:20.254 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:223,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:20.254 [Thd =33] Info Default Stripes are collected for data processing！strip_no:223 2025-08-31 07:51:20.254 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:223,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:20.254 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:20.255 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:223,source_light_Type:A_SourceLightType 2025-08-31 07:51:20.255 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:223,source_light_Type:B_SourceLightType 2025-08-31 07:51:20.255 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：223,A_SourceLightType 2025-08-31 07:51:20.255 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：223,B_SourceLightType 2025-08-31 07:51:20.430 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;223/265, 2025-08-31 07:51:20.439 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:20.517 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:20.744 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:20.748 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":223,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_223_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:20.768 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:20 2025-08-31 07:51:20.779 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:20 2025-08-31 07:51:20.851 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 224 2025-08-31 07:51:20.851 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 224 2025-08-31 07:51:20.851 [Thd =340] Info Default 开始扫描条带； [224/265] 2025-08-31 07:51:20.869 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:51:20.872 [Thd =202] Info Default CaptureBeginX: 69.73210, CaptureBeginY:-37.29599, CaptureEndX:-69.54677, CaptureEndY:-37.29599, VectorBeginX:71.29699, VectorBeginY:-37.29599, VectorEndX:-71.50326, VectorEndY:-37.29599, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:51:20.872 [Thd =202] Info Default ***row:224, vectorBeginX:71.297, vectorBeginY:-37.296, captureBeginX:69.732, captureBeginY:-37.296, captureEndX:-69.547, captureEndY:-37.296, vectorEndX:-71.503, vectorEndY:-37.296 2025-08-31 07:51:20.872 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:20.874 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.732100005823,EndPoint:69.5467722829137 2025-08-31 07:51:21.271 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:21.274 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":223,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_223_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:25.698 [Thd =34] Info Default Stripes are collected for data processing！strip_no:224 2025-08-31 07:51:25.714 [Thd =33] Info Default Stripes are collected for data processing！strip_no:224 2025-08-31 07:51:25.715 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:224,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:25.715 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:25.715 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:224,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:25.715 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:224,source_light_Type:B_SourceLightType 2025-08-31 07:51:25.715 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:224,source_light_Type:A_SourceLightType 2025-08-31 07:51:25.716 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：224,B_SourceLightType 2025-08-31 07:51:25.716 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：224,A_SourceLightType 2025-08-31 07:51:25.871 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;224/265, 2025-08-31 07:51:25.880 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:25.923 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:26.198 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:26.201 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":224,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_224_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:26.271 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 225 2025-08-31 07:51:26.271 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 225 2025-08-31 07:51:26.271 [Thd =322] Info Default 开始扫描条带； [225/265] 2025-08-31 07:51:26.281 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:51:26.283 [Thd =202] Info Default ***row:225, vectorBeginX:-71.503, vectorBeginY:-37.724, captureBeginX:-69.884, captureBeginY:-37.724, captureEndX:69.395, captureEndY:-37.724, vectorEndX:71.297, vectorEndY:-37.724 2025-08-31 07:51:26.283 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:26.285 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8841997145925,EndPoint:-69.3946725741441 2025-08-31 07:51:26.323 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:26 2025-08-31 07:51:26.341 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:26 2025-08-31 07:51:26.703 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:26.705 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":224,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_224_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:31.108 [Thd =33] Info Default Stripes are collected for data processing！strip_no:225 2025-08-31 07:51:31.108 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:225,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:31.108 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:31.109 [Thd =34] Info Default Stripes are collected for data processing！strip_no:225 2025-08-31 07:51:31.123 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:225,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:31.123 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:225,source_light_Type:B_SourceLightType 2025-08-31 07:51:31.124 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:225,source_light_Type:A_SourceLightType 2025-08-31 07:51:31.124 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：225,B_SourceLightType 2025-08-31 07:51:31.124 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：225,A_SourceLightType 2025-08-31 07:51:31.285 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;225/265, 2025-08-31 07:51:31.294 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:31.340 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:31.607 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:31.609 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":225,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_225_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:31.690 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 226 2025-08-31 07:51:31.690 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 226 2025-08-31 07:51:31.690 [Thd =262] Info Default 开始扫描条带； [226/265] 2025-08-31 07:51:31.699 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:51:31.701 [Thd =202] Info Default CaptureBeginX: 69.73209, CaptureBeginY:-38.15261, CaptureEndX:-69.54678, CaptureEndY:-38.15261, VectorBeginX:71.29698, VectorBeginY:-38.15261, VectorEndX:-71.50327, VectorEndY:-38.15261, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:51:31.702 [Thd =202] Info Default ***row:226, vectorBeginX:71.297, vectorBeginY:-38.153, captureBeginX:69.732, captureBeginY:-38.153, captureEndX:-69.547, captureEndY:-38.153, vectorEndX:-71.503, vectorEndY:-38.153 2025-08-31 07:51:31.702 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:31.704 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7320948178347,EndPoint:69.5467774709019 2025-08-31 07:51:31.876 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:31 2025-08-31 07:51:31.887 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:31 2025-08-31 07:51:32.109 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:32.112 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":225,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_225_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:36.406 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:36 2025-08-31 07:51:36.436 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:36 2025-08-31 07:51:36.522 [Thd =34] Info Default Stripes are collected for data processing！strip_no:226 2025-08-31 07:51:36.522 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:226,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:36.522 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:36.523 [Thd =33] Info Default Stripes are collected for data processing！strip_no:226 2025-08-31 07:51:36.523 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:226,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:36.523 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:226,source_light_Type:A_SourceLightType 2025-08-31 07:51:36.523 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:226,source_light_Type:B_SourceLightType 2025-08-31 07:51:36.523 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：226,A_SourceLightType 2025-08-31 07:51:36.524 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：226,B_SourceLightType 2025-08-31 07:51:36.695 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;226/265, 2025-08-31 07:51:36.705 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:36.789 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:37.004 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:37.007 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":226,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_226_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:37.125 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 227 2025-08-31 07:51:37.125 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 227 2025-08-31 07:51:37.125 [Thd =299] Info Default 开始扫描条带； [227/265] 2025-08-31 07:51:37.134 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:51:37.137 [Thd =202] Info Default ***row:227, vectorBeginX:-71.503, vectorBeginY:-38.581, captureBeginX:-69.884, captureBeginY:-38.581, captureEndX:69.395, captureEndY:-38.581, vectorEndX:71.297, vectorEndY:-38.581 2025-08-31 07:51:37.137 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:37.139 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.884178840569,EndPoint:-69.3946934481676 2025-08-31 07:51:37.521 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:37.524 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":226,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_226_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:41.960 [Thd =33] Info Default Stripes are collected for data processing！strip_no:227 2025-08-31 07:51:41.960 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:227,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:41.960 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:41.960 [Thd =34] Info Default Stripes are collected for data processing！strip_no:227 2025-08-31 07:51:41.960 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:227,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:41.961 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:227,source_light_Type:B_SourceLightType 2025-08-31 07:51:41.961 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:227,source_light_Type:A_SourceLightType 2025-08-31 07:51:41.961 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：227,B_SourceLightType 2025-08-31 07:51:41.961 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：227,A_SourceLightType 2025-08-31 07:51:42.140 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;227/265, 2025-08-31 07:51:42.149 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:42.192 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:42.460 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:42.462 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":227,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_227_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:42.473 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:42 2025-08-31 07:51:42.485 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:42 2025-08-31 07:51:42.526 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 228 2025-08-31 07:51:42.526 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 228 2025-08-31 07:51:42.526 [Thd =193] Info Default 开始扫描条带； [228/265] 2025-08-31 07:51:42.535 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:51:42.538 [Thd =202] Info Default CaptureBeginX: 69.73215, CaptureBeginY:-39.00923, CaptureEndX:-69.54672, CaptureEndY:-39.00923, VectorBeginX:71.29704, VectorBeginY:-39.00923, VectorEndX:-71.50321, VectorEndY:-39.00923, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:51:42.538 [Thd =202] Info Default ***row:228, vectorBeginX:71.297, vectorBeginY:-39.009, captureBeginX:69.732, captureBeginY:-39.009, captureEndX:-69.547, captureEndY:-39.009, vectorEndX:-71.503, vectorEndY:-39.009 2025-08-31 07:51:42.538 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:42.540 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7321473080691,EndPoint:69.5467249806676 2025-08-31 07:51:42.977 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:42.979 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":227,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_227_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:47.357 [Thd =34] Info Default Stripes are collected for data processing！strip_no:228 2025-08-31 07:51:47.357 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:228,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:47.357 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:47.358 [Thd =33] Info Default Stripes are collected for data processing！strip_no:228 2025-08-31 07:51:47.358 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:228,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:47.358 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:228,source_light_Type:A_SourceLightType 2025-08-31 07:51:47.358 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:228,source_light_Type:B_SourceLightType 2025-08-31 07:51:47.358 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：228,A_SourceLightType 2025-08-31 07:51:47.358 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：228,B_SourceLightType 2025-08-31 07:51:47.520 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:47 2025-08-31 07:51:47.528 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;228/265, 2025-08-31 07:51:47.537 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:47.541 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:47 2025-08-31 07:51:47.618 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:47.837 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:47.839 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":228,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_228_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:47.956 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 229 2025-08-31 07:51:47.956 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 229 2025-08-31 07:51:47.956 [Thd =215] Info Default 开始扫描条带； [229/265] 2025-08-31 07:51:47.965 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:51:47.968 [Thd =202] Info Default ***row:229, vectorBeginX:-71.503, vectorBeginY:-39.438, captureBeginX:-69.884, captureBeginY:-39.438, captureEndX:69.395, captureEndY:-39.438, vectorEndX:71.297, vectorEndY:-39.438 2025-08-31 07:51:47.968 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:47.969 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8841258620534,EndPoint:-69.3947464266832 2025-08-31 07:51:48.341 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:48.344 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":228,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_228_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:52.799 [Thd =34] Info Default Stripes are collected for data processing！strip_no:229 2025-08-31 07:51:52.799 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:229,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:52.799 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:52.800 [Thd =33] Info Default Stripes are collected for data processing！strip_no:229 2025-08-31 07:51:52.800 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:229,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:52.800 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:229,source_light_Type:A_SourceLightType 2025-08-31 07:51:52.800 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:229,source_light_Type:B_SourceLightType 2025-08-31 07:51:52.800 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：229,A_SourceLightType 2025-08-31 07:51:52.800 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：229,B_SourceLightType 2025-08-31 07:51:52.966 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;229/265, 2025-08-31 07:51:52.975 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:53.068 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:53.281 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:53.284 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":229,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_229_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:53.407 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 230 2025-08-31 07:51:53.407 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 230 2025-08-31 07:51:53.407 [Thd =299] Info Default 开始扫描条带； [230/265] 2025-08-31 07:51:53.416 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:51:53.419 [Thd =202] Info Default CaptureBeginX: 69.73221, CaptureBeginY:-39.86585, CaptureEndX:-69.54666, CaptureEndY:-39.86585, VectorBeginX:71.29710, VectorBeginY:-39.86585, VectorEndX:-71.50315, VectorEndY:-39.86585, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:51:53.419 [Thd =202] Info Default ***row:230, vectorBeginX:71.297, vectorBeginY:-39.866, captureBeginX:69.732, captureBeginY:-39.866, captureEndX:-69.547, captureEndY:-39.866, vectorEndX:-71.503, vectorEndY:-39.866 2025-08-31 07:51:53.419 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:53.421 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7322110898073,EndPoint:69.5466611989293 2025-08-31 07:51:53.801 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:53.804 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":229,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_229_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:54.085 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:54 2025-08-31 07:51:54.105 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:54 2025-08-31 07:51:58.126 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:51:58 2025-08-31 07:51:58.149 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:51:58 2025-08-31 07:51:58.239 [Thd =34] Info Default Stripes are collected for data processing！strip_no:230 2025-08-31 07:51:58.239 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:230,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:58.239 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:51:58.239 [Thd =33] Info Default Stripes are collected for data processing！strip_no:230 2025-08-31 07:51:58.239 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:230,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:51:58.240 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:230,source_light_Type:A_SourceLightType 2025-08-31 07:51:58.240 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:230,source_light_Type:B_SourceLightType 2025-08-31 07:51:58.240 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：230,A_SourceLightType 2025-08-31 07:51:58.240 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：230,B_SourceLightType 2025-08-31 07:51:58.421 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;230/265, 2025-08-31 07:51:58.431 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:51:58.478 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:51:58.722 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:51:58.724 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":230,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_230_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:51:58.814 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 231 2025-08-31 07:51:58.814 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 231 2025-08-31 07:51:58.814 [Thd =302] Info Default 开始扫描条带； [231/265] 2025-08-31 07:51:58.823 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:51:58.826 [Thd =202] Info Default ***row:231, vectorBeginX:-71.503, vectorBeginY:-40.294, captureBeginX:-69.884, captureBeginY:-40.294, captureEndX:69.395, captureEndY:-40.294, vectorEndX:71.297, vectorEndY:-40.294 2025-08-31 07:51:58.826 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:51:58.827 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8840652541433,EndPoint:-69.3948070345934 2025-08-31 07:51:59.234 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:51:59.237 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":230,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_230_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:03.648 [Thd =34] Info Default Stripes are collected for data processing！strip_no:231 2025-08-31 07:52:03.648 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:231,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:03.648 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:03.650 [Thd =33] Info Default Stripes are collected for data processing！strip_no:231 2025-08-31 07:52:03.650 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:231,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:03.650 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:231,source_light_Type:A_SourceLightType 2025-08-31 07:52:03.650 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:231,source_light_Type:B_SourceLightType 2025-08-31 07:52:03.650 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：231,A_SourceLightType 2025-08-31 07:52:03.650 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：231,B_SourceLightType 2025-08-31 07:52:03.819 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;231/265, 2025-08-31 07:52:03.829 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:03.878 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:04.140 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:04.143 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":231,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_231_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:04.198 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:04 2025-08-31 07:52:04.209 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:04 2025-08-31 07:52:04.230 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 232 2025-08-31 07:52:04.230 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 232 2025-08-31 07:52:04.230 [Thd =193] Info Default 开始扫描条带； [232/265] 2025-08-31 07:52:04.240 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:52:04.243 [Thd =202] Info Default CaptureBeginX: 69.73225, CaptureBeginY:-40.72247, CaptureEndX:-69.54663, CaptureEndY:-40.72247, VectorBeginX:71.29714, VectorBeginY:-40.72247, VectorEndX:-71.50312, VectorEndY:-40.72247, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:52:04.243 [Thd =202] Info Default ***row:232, vectorBeginX:71.297, vectorBeginY:-40.722, captureBeginX:69.732, captureBeginY:-40.722, captureEndX:-69.547, captureEndY:-40.722, vectorEndX:-71.503, vectorEndY:-40.722 2025-08-31 07:52:04.243 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:04.244 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7322455746706,EndPoint:69.546626714066 2025-08-31 07:52:04.649 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:04.652 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":231,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_231_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:09.062 [Thd =34] Info Default Stripes are collected for data processing！strip_no:232 2025-08-31 07:52:09.062 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:232,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:09.062 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:09.063 [Thd =33] Info Default Stripes are collected for data processing！strip_no:232 2025-08-31 07:52:09.063 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:232,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:09.063 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:232,source_light_Type:A_SourceLightType 2025-08-31 07:52:09.063 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:232,source_light_Type:B_SourceLightType 2025-08-31 07:52:09.063 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：232,A_SourceLightType 2025-08-31 07:52:09.063 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：232,B_SourceLightType 2025-08-31 07:52:09.232 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:09 2025-08-31 07:52:09.233 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;232/265, 2025-08-31 07:52:09.242 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:09.244 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:09 2025-08-31 07:52:09.327 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:09.552 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:09.554 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":232,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_232_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:09.665 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 233 2025-08-31 07:52:09.665 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 233 2025-08-31 07:52:09.665 [Thd =321] Info Default 开始扫描条带； [233/265] 2025-08-31 07:52:09.674 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:52:09.677 [Thd =202] Info Default ***row:233, vectorBeginX:-71.503, vectorBeginY:-41.151, captureBeginX:-69.884, captureBeginY:-41.151, captureEndX:69.395, captureEndY:-41.151, vectorEndX:71.297, vectorEndY:-41.151 2025-08-31 07:52:09.678 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:09.679 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8840286330495,EndPoint:-69.3948436556871 2025-08-31 07:52:10.081 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:10.084 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":232,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_232_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:14.498 [Thd =34] Info Default Stripes are collected for data processing！strip_no:233 2025-08-31 07:52:14.498 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:233,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:14.498 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:14.499 [Thd =33] Info Default Stripes are collected for data processing！strip_no:233 2025-08-31 07:52:14.499 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:233,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:14.499 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:233,source_light_Type:A_SourceLightType 2025-08-31 07:52:14.499 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:233,source_light_Type:B_SourceLightType 2025-08-31 07:52:14.499 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：233,A_SourceLightType 2025-08-31 07:52:14.499 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：233,B_SourceLightType 2025-08-31 07:52:14.675 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;233/265, 2025-08-31 07:52:14.685 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:14.753 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:15.008 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:15.010 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":233,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_233_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:15.094 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 234 2025-08-31 07:52:15.094 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 234 2025-08-31 07:52:15.094 [Thd =302] Info Default 开始扫描条带； [234/265] 2025-08-31 07:52:15.103 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:52:15.106 [Thd =202] Info Default CaptureBeginX: 69.73228, CaptureBeginY:-41.57909, CaptureEndX:-69.54659, CaptureEndY:-41.57909, VectorBeginX:71.29717, VectorBeginY:-41.57909, VectorEndX:-71.50308, VectorEndY:-41.57909, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:52:15.106 [Thd =202] Info Default ***row:234, vectorBeginX:71.297, vectorBeginY:-41.579, captureBeginX:69.732, captureBeginY:-41.579, captureEndX:-69.547, captureEndY:-41.579, vectorEndX:-71.503, vectorEndY:-41.579 2025-08-31 07:52:15.106 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:15.109 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7322822567995,EndPoint:69.5465900319371 2025-08-31 07:52:15.527 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:15.529 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":233,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_233_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:15.804 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:15 2025-08-31 07:52:15.823 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:15 2025-08-31 07:52:19.855 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:19 2025-08-31 07:52:19.875 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:19 2025-08-31 07:52:19.936 [Thd =33] Info Default Stripes are collected for data processing！strip_no:234 2025-08-31 07:52:19.936 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:234,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:19.936 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:19.937 [Thd =34] Info Default Stripes are collected for data processing！strip_no:234 2025-08-31 07:52:19.938 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:234,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:19.938 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:234,source_light_Type:B_SourceLightType 2025-08-31 07:52:19.938 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:234,source_light_Type:A_SourceLightType 2025-08-31 07:52:19.938 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：234,B_SourceLightType 2025-08-31 07:52:19.938 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：234,A_SourceLightType 2025-08-31 07:52:20.103 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;234/265, 2025-08-31 07:52:20.112 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:20.227 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:20.420 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:20.442 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":234,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_234_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:20.570 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 235 2025-08-31 07:52:20.570 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 235 2025-08-31 07:52:20.570 [Thd =215] Info Default 开始扫描条带； [235/265] 2025-08-31 07:52:20.579 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:52:20.582 [Thd =202] Info Default ***row:235, vectorBeginX:-71.503, vectorBeginY:-42.007, captureBeginX:-69.884, captureBeginY:-42.007, captureEndX:69.395, captureEndY:-42.007, vectorEndX:71.297, vectorEndY:-42.007 2025-08-31 07:52:20.582 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:20.584 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8839916457448,EndPoint:-69.3948806429918 2025-08-31 07:52:20.943 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:20.945 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":234,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_234_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:25.404 [Thd =33] Info Default Stripes are collected for data processing！strip_no:235 2025-08-31 07:52:25.405 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:235,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:25.405 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:25.406 [Thd =34] Info Default Stripes are collected for data processing！strip_no:235 2025-08-31 07:52:25.407 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:235,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:25.407 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:235,source_light_Type:B_SourceLightType 2025-08-31 07:52:25.407 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:235,source_light_Type:A_SourceLightType 2025-08-31 07:52:25.407 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：235,B_SourceLightType 2025-08-31 07:52:25.407 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：235,A_SourceLightType 2025-08-31 07:52:25.589 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;235/265, 2025-08-31 07:52:25.598 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:25.687 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:25.901 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:25 2025-08-31 07:52:25.908 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:25.910 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":235,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_235_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:25.911 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:25 2025-08-31 07:52:26.039 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 236 2025-08-31 07:52:26.039 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 236 2025-08-31 07:52:26.039 [Thd =322] Info Default 开始扫描条带； [236/265] 2025-08-31 07:52:26.048 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:52:26.051 [Thd =202] Info Default CaptureBeginX: 69.73233, CaptureBeginY:-42.43571, CaptureEndX:-69.54654, CaptureEndY:-42.43571, VectorBeginX:71.29722, VectorBeginY:-42.43571, VectorEndX:-71.50303, VectorEndY:-42.43571, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:52:26.051 [Thd =202] Info Default ***row:236, vectorBeginX:71.297, vectorBeginY:-42.436, captureBeginX:69.732, captureBeginY:-42.436, captureEndX:-69.547, captureEndY:-42.436, vectorEndX:-71.503, vectorEndY:-42.436 2025-08-31 07:52:26.051 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:26.053 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7323306576784,EndPoint:69.5465416310582 2025-08-31 07:52:26.406 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:26.409 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":235,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_235_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:30.438 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:30 2025-08-31 07:52:30.460 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:30 2025-08-31 07:52:30.871 [Thd =33] Info Default Stripes are collected for data processing！strip_no:236 2025-08-31 07:52:30.871 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:236,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:30.872 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:30.872 [Thd =34] Info Default Stripes are collected for data processing！strip_no:236 2025-08-31 07:52:30.888 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:236,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:30.888 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:236,source_light_Type:B_SourceLightType 2025-08-31 07:52:30.888 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:236,source_light_Type:A_SourceLightType 2025-08-31 07:52:30.889 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：236,B_SourceLightType 2025-08-31 07:52:30.889 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：236,A_SourceLightType 2025-08-31 07:52:31.047 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;236/265, 2025-08-31 07:52:31.057 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:31.097 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:31.374 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:31.377 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":236,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_236_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:31.449 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 237 2025-08-31 07:52:31.449 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 237 2025-08-31 07:52:31.449 [Thd =261] Info Default 开始扫描条带； [237/265] 2025-08-31 07:52:31.458 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:52:31.461 [Thd =202] Info Default ***row:237, vectorBeginX:-71.503, vectorBeginY:-42.864, captureBeginX:-69.884, captureBeginY:-42.864, captureEndX:69.395, captureEndY:-42.864, vectorEndX:71.297, vectorEndY:-42.864 2025-08-31 07:52:31.461 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:31.463 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8839555739675,EndPoint:-69.3949167147691 2025-08-31 07:52:31.875 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:31.878 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":236,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_236_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:36.302 [Thd =34] Info Default Stripes are collected for data processing！strip_no:237 2025-08-31 07:52:36.302 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:237,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:36.302 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:36.302 [Thd =33] Info Default Stripes are collected for data processing！strip_no:237 2025-08-31 07:52:36.302 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:237,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:36.302 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:237,source_light_Type:A_SourceLightType 2025-08-31 07:52:36.302 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:237,source_light_Type:B_SourceLightType 2025-08-31 07:52:36.302 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：237,A_SourceLightType 2025-08-31 07:52:36.303 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：237,B_SourceLightType 2025-08-31 07:52:36.483 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;237/265, 2025-08-31 07:52:36.493 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:36.638 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:36.802 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:36.805 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":237,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_237_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:36.975 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 238 2025-08-31 07:52:36.975 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 238 2025-08-31 07:52:36.975 [Thd =311] Info Default 开始扫描条带； [238/265] 2025-08-31 07:52:36.985 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:52:36.988 [Thd =202] Info Default CaptureBeginX: 69.73236, CaptureBeginY:-43.29233, CaptureEndX:-69.54651, CaptureEndY:-43.29233, VectorBeginX:71.29725, VectorBeginY:-43.29233, VectorEndX:-71.50300, VectorEndY:-43.29233, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:52:36.988 [Thd =202] Info Default ***row:238, vectorBeginX:71.297, vectorBeginY:-43.292, captureBeginX:69.732, captureBeginY:-43.292, captureEndX:-69.547, captureEndY:-43.292, vectorEndX:-71.503, vectorEndY:-43.292 2025-08-31 07:52:36.988 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:36.991 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7323591000612,EndPoint:69.5465131886754 2025-08-31 07:52:36.998 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:36 2025-08-31 07:52:37.016 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:37 2025-08-31 07:52:37.303 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:37.305 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":237,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_237_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:41.545 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:41 2025-08-31 07:52:41.556 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:41 2025-08-31 07:52:41.814 [Thd =34] Info Default Stripes are collected for data processing！strip_no:238 2025-08-31 07:52:41.814 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:238,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:41.814 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:41.814 [Thd =33] Info Default Stripes are collected for data processing！strip_no:238 2025-08-31 07:52:41.814 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:238,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:41.814 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:238,source_light_Type:A_SourceLightType 2025-08-31 07:52:41.814 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:238,source_light_Type:B_SourceLightType 2025-08-31 07:52:41.815 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：238,A_SourceLightType 2025-08-31 07:52:41.815 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：238,B_SourceLightType 2025-08-31 07:52:41.984 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;238/265, 2025-08-31 07:52:41.994 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:42.049 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:42.292 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:42.295 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":238,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_238_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:42.389 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 239 2025-08-31 07:52:42.389 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 239 2025-08-31 07:52:42.389 [Thd =215] Info Default 开始扫描条带； [239/265] 2025-08-31 07:52:42.398 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:52:42.401 [Thd =202] Info Default ***row:239, vectorBeginX:-71.503, vectorBeginY:-43.721, captureBeginX:-69.884, captureBeginY:-43.721, captureEndX:69.395, captureEndY:-43.721, vectorEndX:71.297, vectorEndY:-43.721 2025-08-31 07:52:42.401 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:42.403 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8839148635183,EndPoint:-69.3949574252184 2025-08-31 07:52:42.801 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:42.803 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":238,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_238_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:47.242 [Thd =34] Info Default Stripes are collected for data processing！strip_no:239 2025-08-31 07:52:47.242 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:239,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:47.242 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:47.242 [Thd =33] Info Default Stripes are collected for data processing！strip_no:239 2025-08-31 07:52:47.243 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:239,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:47.243 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:239,source_light_Type:A_SourceLightType 2025-08-31 07:52:47.243 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:239,source_light_Type:B_SourceLightType 2025-08-31 07:52:47.243 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：239,A_SourceLightType 2025-08-31 07:52:47.243 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：239,B_SourceLightType 2025-08-31 07:52:47.405 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;239/265, 2025-08-31 07:52:47.414 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:47.466 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:47.587 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:47 2025-08-31 07:52:47.598 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:47 2025-08-31 07:52:47.725 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:47.728 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":239,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_239_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:47.802 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 240 2025-08-31 07:52:47.802 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 240 2025-08-31 07:52:47.802 [Thd =321] Info Default 开始扫描条带； [240/265] 2025-08-31 07:52:47.830 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:52:47.833 [Thd =202] Info Default CaptureBeginX: 69.73240, CaptureBeginY:-44.14895, CaptureEndX:-69.54648, CaptureEndY:-44.14895, VectorBeginX:71.29729, VectorBeginY:-44.14895, VectorEndX:-71.50297, VectorEndY:-44.14895, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:52:47.833 [Thd =202] Info Default ***row:240, vectorBeginX:71.297, vectorBeginY:-44.149, captureBeginX:69.732, captureBeginY:-44.149, captureEndX:-69.546, captureEndY:-44.149, vectorEndX:-71.503, vectorEndY:-44.149 2025-08-31 07:52:47.833 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:47.835 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7323955380495,EndPoint:69.5464767506871 2025-08-31 07:52:48.232 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:48.235 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":239,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_239_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:52.633 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:52 2025-08-31 07:52:52.654 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:52 2025-08-31 07:52:52.657 [Thd =33] Info Default Stripes are collected for data processing！strip_no:240 2025-08-31 07:52:52.657 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:240,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:52.657 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:52.659 [Thd =34] Info Default Stripes are collected for data processing！strip_no:240 2025-08-31 07:52:52.659 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:240,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:52.659 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:240,source_light_Type:B_SourceLightType 2025-08-31 07:52:52.659 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:240,source_light_Type:A_SourceLightType 2025-08-31 07:52:52.659 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：240,B_SourceLightType 2025-08-31 07:52:52.659 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：240,A_SourceLightType 2025-08-31 07:52:52.829 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;240/265, 2025-08-31 07:52:52.838 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:52.893 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:53.140 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:53.142 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":240,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_240_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:53.239 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 241 2025-08-31 07:52:53.239 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 241 2025-08-31 07:52:53.239 [Thd =320] Info Default 开始扫描条带； [241/265] 2025-08-31 07:52:53.248 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:52:53.251 [Thd =202] Info Default ***row:241, vectorBeginX:-71.503, vectorBeginY:-44.577, captureBeginX:-69.884, captureBeginY:-44.577, captureEndX:69.395, captureEndY:-44.577, vectorEndX:71.297, vectorEndY:-44.577 2025-08-31 07:52:53.251 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:53.253 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8838905715261,EndPoint:-69.3949817172106 2025-08-31 07:52:53.642 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:53.645 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":240,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_240_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:58.073 [Thd =33] Info Default Stripes are collected for data processing！strip_no:241 2025-08-31 07:52:58.073 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:241,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:58.074 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:52:58.075 [Thd =34] Info Default Stripes are collected for data processing！strip_no:241 2025-08-31 07:52:58.075 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:241,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:52:58.075 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:241,source_light_Type:B_SourceLightType 2025-08-31 07:52:58.075 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:241,source_light_Type:A_SourceLightType 2025-08-31 07:52:58.075 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：241,B_SourceLightType 2025-08-31 07:52:58.075 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：241,A_SourceLightType 2025-08-31 07:52:58.249 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;241/265, 2025-08-31 07:52:58.268 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:52:58.316 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:52:58.609 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:52:58.612 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":241,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_241_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:52:58.661 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 242 2025-08-31 07:52:58.661 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 242 2025-08-31 07:52:58.661 [Thd =215] Info Default 开始扫描条带； [242/265] 2025-08-31 07:52:58.674 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:52:58.677 [Thd =202] Info Default CaptureBeginX: 69.73241, CaptureBeginY:-45.00557, CaptureEndX:-69.54646, CaptureEndY:-45.00557, VectorBeginX:71.29730, VectorBeginY:-45.00557, VectorEndX:-71.50295, VectorEndY:-45.00557, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:52:58.677 [Thd =202] Info Default ***row:242, vectorBeginX:71.297, vectorBeginY:-45.006, captureBeginX:69.732, captureBeginY:-45.006, captureEndX:-69.546, captureEndY:-45.006, vectorEndX:-71.503, vectorEndY:-45.006 2025-08-31 07:52:58.677 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:52:58.678 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7324076840456,EndPoint:69.546464604691 2025-08-31 07:52:58.709 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:52:58 2025-08-31 07:52:58.720 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:52:58 2025-08-31 07:52:59.116 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:52:59.119 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":241,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_241_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:03.313 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:03 2025-08-31 07:53:03.332 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:03 2025-08-31 07:53:03.512 [Thd =34] Info Default Stripes are collected for data processing！strip_no:242 2025-08-31 07:53:03.513 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:242,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:03.513 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:03.514 [Thd =33] Info Default Stripes are collected for data processing！strip_no:242 2025-08-31 07:53:03.514 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:242,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:03.514 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:242,source_light_Type:A_SourceLightType 2025-08-31 07:53:03.514 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:242,source_light_Type:B_SourceLightType 2025-08-31 07:53:03.514 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：242,A_SourceLightType 2025-08-31 07:53:03.514 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：242,B_SourceLightType 2025-08-31 07:53:03.686 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;242/265, 2025-08-31 07:53:03.695 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:03.751 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:04.001 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:04.003 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":242,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_242_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:04.087 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 243 2025-08-31 07:53:04.087 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 243 2025-08-31 07:53:04.087 [Thd =340] Info Default 开始扫描条带； [243/265] 2025-08-31 07:53:04.105 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:53:04.108 [Thd =202] Info Default ***row:243, vectorBeginX:-71.503, vectorBeginY:-45.434, captureBeginX:-69.884, captureBeginY:-45.434, captureEndX:69.395, captureEndY:-45.434, vectorEndX:71.297, vectorEndY:-45.434 2025-08-31 07:53:04.108 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:04.109 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8838764113698,EndPoint:-69.3949958773668 2025-08-31 07:53:04.526 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:04.528 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":242,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_242_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:08.854 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:08 2025-08-31 07:53:08.865 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:08 2025-08-31 07:53:08.932 [Thd =33] Info Default Stripes are collected for data processing！strip_no:243 2025-08-31 07:53:08.933 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:243,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:08.933 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:08.934 [Thd =34] Info Default Stripes are collected for data processing！strip_no:243 2025-08-31 07:53:08.935 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:243,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:08.935 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:243,source_light_Type:B_SourceLightType 2025-08-31 07:53:08.935 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:243,source_light_Type:A_SourceLightType 2025-08-31 07:53:08.935 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：243,B_SourceLightType 2025-08-31 07:53:08.935 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：243,A_SourceLightType 2025-08-31 07:53:09.124 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;243/265, 2025-08-31 07:53:09.133 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:09.265 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:09.431 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:09.434 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":243,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_243_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:09.604 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 244 2025-08-31 07:53:09.604 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 244 2025-08-31 07:53:09.604 [Thd =302] Info Default 开始扫描条带； [244/265] 2025-08-31 07:53:09.614 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:53:09.617 [Thd =202] Info Default CaptureBeginX: 69.73242, CaptureBeginY:-45.86219, CaptureEndX:-69.54645, CaptureEndY:-45.86219, VectorBeginX:71.29731, VectorBeginY:-45.86219, VectorEndX:-71.50294, VectorEndY:-45.86219, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:53:09.617 [Thd =202] Info Default ***row:244, vectorBeginX:71.297, vectorBeginY:-45.862, captureBeginX:69.732, captureBeginY:-45.862, captureEndX:-69.546, captureEndY:-45.862, vectorEndX:-71.503, vectorEndY:-45.862 2025-08-31 07:53:09.617 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:09.618 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7324222104128,EndPoint:69.5464500783238 2025-08-31 07:53:09.931 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:09.934 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":243,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_243_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:14.386 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:14 2025-08-31 07:53:14.406 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:14 2025-08-31 07:53:14.438 [Thd =34] Info Default Stripes are collected for data processing！strip_no:244 2025-08-31 07:53:14.439 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:244,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:14.439 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:14.439 [Thd =33] Info Default Stripes are collected for data processing！strip_no:244 2025-08-31 07:53:14.439 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:244,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:14.439 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:244,source_light_Type:A_SourceLightType 2025-08-31 07:53:14.439 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:244,source_light_Type:B_SourceLightType 2025-08-31 07:53:14.439 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：244,A_SourceLightType 2025-08-31 07:53:14.439 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：244,B_SourceLightType 2025-08-31 07:53:14.624 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;244/265, 2025-08-31 07:53:14.633 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:14.720 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:14.933 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:14.935 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":244,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_244_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:15.068 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 245 2025-08-31 07:53:15.068 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 245 2025-08-31 07:53:15.068 [Thd =193] Info Default 开始扫描条带； [245/265] 2025-08-31 07:53:15.086 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:53:15.088 [Thd =202] Info Default ***row:245, vectorBeginX:-71.503, vectorBeginY:-46.290, captureBeginX:-69.884, captureBeginY:-46.290, captureEndX:69.395, captureEndY:-46.290, vectorEndX:71.297, vectorEndY:-46.290 2025-08-31 07:53:15.089 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:15.091 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8838496779714,EndPoint:-69.3950226107652 2025-08-31 07:53:15.430 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:15.433 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":244,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_244_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:19.921 [Thd =34] Info Default Stripes are collected for data processing！strip_no:245 2025-08-31 07:53:19.921 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:245,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:19.921 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:19.922 [Thd =33] Info Default Stripes are collected for data processing！strip_no:245 2025-08-31 07:53:19.922 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:245,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:19.922 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:245,source_light_Type:A_SourceLightType 2025-08-31 07:53:19.922 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：245,A_SourceLightType 2025-08-31 07:53:19.922 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：245,B_SourceLightType 2025-08-31 07:53:19.922 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:245,source_light_Type:B_SourceLightType 2025-08-31 07:53:20.090 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;245/265, 2025-08-31 07:53:20.099 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:20.201 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:20.409 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:20.415 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":245,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_245_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:20.446 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:20 2025-08-31 07:53:20.470 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:20 2025-08-31 07:53:20.537 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 246 2025-08-31 07:53:20.537 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 246 2025-08-31 07:53:20.537 [Thd =302] Info Default 开始扫描条带； [246/265] 2025-08-31 07:53:20.546 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:53:20.548 [Thd =202] Info Default CaptureBeginX: 69.73246, CaptureBeginY:-46.71881, CaptureEndX:-69.54642, CaptureEndY:-46.71881, VectorBeginX:71.29735, VectorBeginY:-46.71881, VectorEndX:-71.50291, VectorEndY:-46.71881, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:53:20.548 [Thd =202] Info Default ***row:246, vectorBeginX:71.297, vectorBeginY:-46.719, captureBeginX:69.732, captureBeginY:-46.719, captureEndX:-69.546, captureEndY:-46.719, vectorEndX:-71.503, vectorEndY:-46.719 2025-08-31 07:53:20.549 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:20.551 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7324560849245,EndPoint:69.5464162038121 2025-08-31 07:53:20.912 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:20.914 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":245,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_245_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:25.368 [Thd =34] Info Default Stripes are collected for data processing！strip_no:246 2025-08-31 07:53:25.368 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:246,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:25.368 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:25.369 [Thd =33] Info Default Stripes are collected for data processing！strip_no:246 2025-08-31 07:53:25.369 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:246,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:25.369 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:246,source_light_Type:A_SourceLightType 2025-08-31 07:53:25.369 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:246,source_light_Type:B_SourceLightType 2025-08-31 07:53:25.369 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：246,A_SourceLightType 2025-08-31 07:53:25.386 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：246,B_SourceLightType 2025-08-31 07:53:25.489 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:25 2025-08-31 07:53:25.509 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:25 2025-08-31 07:53:25.546 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;246/265, 2025-08-31 07:53:25.555 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:25.670 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:25.865 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:25.867 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":246,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_246_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:26.022 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 247 2025-08-31 07:53:26.022 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 247 2025-08-31 07:53:26.022 [Thd =299] Info Default 开始扫描条带； [247/265] 2025-08-31 07:53:26.032 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:53:26.034 [Thd =202] Info Default ***row:247, vectorBeginX:-71.503, vectorBeginY:-47.147, captureBeginX:-69.884, captureBeginY:-47.147, captureEndX:69.395, captureEndY:-47.147, vectorEndX:71.297, vectorEndY:-47.147 2025-08-31 07:53:26.034 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:26.037 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8838280104909,EndPoint:-69.3950442782457 2025-08-31 07:53:26.357 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:26.359 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":246,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_246_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:30.856 [Thd =34] Info Default Stripes are collected for data processing！strip_no:247 2025-08-31 07:53:30.856 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:247,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:30.856 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:30.857 [Thd =33] Info Default Stripes are collected for data processing！strip_no:247 2025-08-31 07:53:30.857 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:247,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:30.857 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:247,source_light_Type:A_SourceLightType 2025-08-31 07:53:30.857 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:247,source_light_Type:B_SourceLightType 2025-08-31 07:53:30.857 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：247,A_SourceLightType 2025-08-31 07:53:30.857 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：247,B_SourceLightType 2025-08-31 07:53:31.031 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;247/265, 2025-08-31 07:53:31.047 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:31.106 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:31.355 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:31.358 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":247,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_247_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:31.459 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 248 2025-08-31 07:53:31.459 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 248 2025-08-31 07:53:31.459 [Thd =311] Info Default 开始扫描条带； [248/265] 2025-08-31 07:53:31.469 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:53:31.471 [Thd =202] Info Default CaptureBeginX: 69.73248, CaptureBeginY:-47.57543, CaptureEndX:-69.54639, CaptureEndY:-47.57543, VectorBeginX:71.29737, VectorBeginY:-47.57543, VectorEndX:-71.50288, VectorEndY:-47.57543, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:53:31.471 [Thd =202] Info Default ***row:248, vectorBeginX:71.297, vectorBeginY:-47.575, captureBeginX:69.732, captureBeginY:-47.575, captureEndX:-69.546, captureEndY:-47.575, vectorEndX:-71.503, vectorEndY:-47.575 2025-08-31 07:53:31.472 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:31.474 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7324832455691,EndPoint:69.5463890431676 2025-08-31 07:53:31.531 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:31 2025-08-31 07:53:31.543 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:31 2025-08-31 07:53:31.858 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:31.860 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":247,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_247_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:36.293 [Thd =34] Info Default Stripes are collected for data processing！strip_no:248 2025-08-31 07:53:36.294 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:248,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:36.294 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:36.294 [Thd =33] Info Default Stripes are collected for data processing！strip_no:248 2025-08-31 07:53:36.294 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:248,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:36.294 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:248,source_light_Type:A_SourceLightType 2025-08-31 07:53:36.294 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:248,source_light_Type:B_SourceLightType 2025-08-31 07:53:36.294 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：248,A_SourceLightType 2025-08-31 07:53:36.294 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：248,B_SourceLightType 2025-08-31 07:53:36.483 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;248/265, 2025-08-31 07:53:36.492 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:36.543 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:36.560 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:36 2025-08-31 07:53:36.569 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:36 2025-08-31 07:53:36.783 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:36.800 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":248,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_248_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:36.882 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 249 2025-08-31 07:53:36.882 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 249 2025-08-31 07:53:36.882 [Thd =311] Info Default 开始扫描条带； [249/265] 2025-08-31 07:53:36.891 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:53:36.894 [Thd =202] Info Default ***row:249, vectorBeginX:-71.503, vectorBeginY:-48.004, captureBeginX:-69.884, captureBeginY:-48.004, captureEndX:69.395, captureEndY:-48.004, vectorEndX:71.297, vectorEndY:-48.004 2025-08-31 07:53:36.894 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:36.897 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8837811354909,EndPoint:-69.3950911532457 2025-08-31 07:53:37.297 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:37.300 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":248,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_248_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:41.716 [Thd =34] Info Default Stripes are collected for data processing！strip_no:249 2025-08-31 07:53:41.716 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:249,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:41.716 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:41.716 [Thd =33] Info Default Stripes are collected for data processing！strip_no:249 2025-08-31 07:53:41.716 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:249,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:41.716 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:249,source_light_Type:A_SourceLightType 2025-08-31 07:53:41.716 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:249,source_light_Type:B_SourceLightType 2025-08-31 07:53:41.717 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：249,A_SourceLightType 2025-08-31 07:53:41.717 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：249,B_SourceLightType 2025-08-31 07:53:41.908 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;249/265, 2025-08-31 07:53:41.917 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:42.016 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:42.217 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:42.219 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":249,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_249_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:42.366 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 250 2025-08-31 07:53:42.366 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 250 2025-08-31 07:53:42.366 [Thd =311] Info Default 开始扫描条带； [250/265] 2025-08-31 07:53:42.377 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:53:42.379 [Thd =202] Info Default CaptureBeginX: 69.73253, CaptureBeginY:-48.43205, CaptureEndX:-69.54634, CaptureEndY:-48.43205, VectorBeginX:71.29742, VectorBeginY:-48.43205, VectorEndX:-71.50283, VectorEndY:-48.43205, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:53:42.380 [Thd =202] Info Default ***row:250, vectorBeginX:71.297, vectorBeginY:-48.432, captureBeginX:69.733, captureBeginY:-48.432, captureEndX:-69.546, captureEndY:-48.432, vectorEndX:-71.503, vectorEndY:-48.432 2025-08-31 07:53:42.380 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:42.382 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7325278012331,EndPoint:69.5463444875035 2025-08-31 07:53:42.605 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:42 2025-08-31 07:53:42.616 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:42 2025-08-31 07:53:42.717 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:42.719 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":249,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_249_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:47.150 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:47 2025-08-31 07:53:47.171 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:47 2025-08-31 07:53:47.204 [Thd =33] Info Default Stripes are collected for data processing！strip_no:250 2025-08-31 07:53:47.205 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:250,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:47.205 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:47.206 [Thd =34] Info Default Stripes are collected for data processing！strip_no:250 2025-08-31 07:53:47.207 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:250,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:47.207 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:250,source_light_Type:B_SourceLightType 2025-08-31 07:53:47.207 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:250,source_light_Type:A_SourceLightType 2025-08-31 07:53:47.207 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：250,B_SourceLightType 2025-08-31 07:53:47.207 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：250,A_SourceLightType 2025-08-31 07:53:47.386 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;250/265, 2025-08-31 07:53:47.395 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:47.487 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:47.699 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:47.701 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":250,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_250_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:47.830 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 251 2025-08-31 07:53:47.830 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 251 2025-08-31 07:53:47.830 [Thd =302] Info Default 开始扫描条带； [251/265] 2025-08-31 07:53:47.839 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:53:47.842 [Thd =202] Info Default ***row:251, vectorBeginX:-71.503, vectorBeginY:-48.860, captureBeginX:-69.884, captureBeginY:-48.860, captureEndX:69.395, captureEndY:-48.860, vectorEndX:71.297, vectorEndY:-48.860 2025-08-31 07:53:47.842 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:47.844 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8837418898855,EndPoint:-69.3951303988512 2025-08-31 07:53:48.196 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:48.199 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":250,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_250_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:52.682 [Thd =33] Info Default Stripes are collected for data processing！strip_no:251 2025-08-31 07:53:52.682 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:251,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:52.682 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:52.684 [Thd =34] Info Default Stripes are collected for data processing！strip_no:251 2025-08-31 07:53:52.684 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:251,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:52.684 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:251,source_light_Type:B_SourceLightType 2025-08-31 07:53:52.685 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:251,source_light_Type:A_SourceLightType 2025-08-31 07:53:52.685 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：251,B_SourceLightType 2025-08-31 07:53:52.685 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：251,A_SourceLightType 2025-08-31 07:53:52.847 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;251/265, 2025-08-31 07:53:52.857 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:52.908 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:53.169 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:53.171 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":251,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_251_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:53.202 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:53 2025-08-31 07:53:53.216 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:53 2025-08-31 07:53:53.259 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 252 2025-08-31 07:53:53.259 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 252 2025-08-31 07:53:53.259 [Thd =262] Info Default 开始扫描条带； [252/265] 2025-08-31 07:53:53.268 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:53:53.271 [Thd =202] Info Default CaptureBeginX: 69.73257, CaptureBeginY:-49.28866, CaptureEndX:-69.54631, CaptureEndY:-49.28866, VectorBeginX:71.29745, VectorBeginY:-49.28866, VectorEndX:-71.50280, VectorEndY:-49.28866, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:53:53.271 [Thd =202] Info Default ***row:252, vectorBeginX:71.297, vectorBeginY:-49.289, captureBeginX:69.733, captureBeginY:-49.289, captureEndX:-69.546, captureEndY:-49.289, vectorEndX:-71.503, vectorEndY:-49.289 2025-08-31 07:53:53.271 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:53.272 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7325653988894,EndPoint:69.5463068898473 2025-08-31 07:53:53.678 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:53.681 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":251,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_251_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:58.106 [Thd =33] Info Default Stripes are collected for data processing！strip_no:252 2025-08-31 07:53:58.106 [Thd =34] Info Default Stripes are collected for data processing！strip_no:252 2025-08-31 07:53:58.107 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:252,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:58.107 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:53:58.107 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:252,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:53:58.107 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:252,source_light_Type:A_SourceLightType 2025-08-31 07:53:58.107 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:252,source_light_Type:B_SourceLightType 2025-08-31 07:53:58.107 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：252,A_SourceLightType 2025-08-31 07:53:58.107 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：252,B_SourceLightType 2025-08-31 07:53:58.253 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:53:58 2025-08-31 07:53:58.264 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;252/265, 2025-08-31 07:53:58.265 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:53:58 2025-08-31 07:53:58.273 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:53:58.341 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:53:58.591 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:53:58.593 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":252,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_252_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:53:58.684 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 253 2025-08-31 07:53:58.684 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 253 2025-08-31 07:53:58.684 [Thd =340] Info Default 开始扫描条带； [253/265] 2025-08-31 07:53:58.693 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:53:58.711 [Thd =202] Info Default ***row:253, vectorBeginX:-71.503, vectorBeginY:-49.717, captureBeginX:-69.884, captureBeginY:-49.717, captureEndX:69.395, captureEndY:-49.717, vectorEndX:71.297, vectorEndY:-49.717 2025-08-31 07:53:58.711 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:53:58.714 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.883713203362,EndPoint:-69.3951590853746 2025-08-31 07:53:59.094 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:53:59.096 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":252,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_252_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:03.542 [Thd =34] Info Default Stripes are collected for data processing！strip_no:253 2025-08-31 07:54:03.542 [Thd =33] Info Default Stripes are collected for data processing！strip_no:253 2025-08-31 07:54:03.542 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:253,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:03.542 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:03.543 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:253,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:03.543 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:253,source_light_Type:B_SourceLightType 2025-08-31 07:54:03.543 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:253,source_light_Type:A_SourceLightType 2025-08-31 07:54:03.543 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：253,B_SourceLightType 2025-08-31 07:54:03.543 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：253,A_SourceLightType 2025-08-31 07:54:03.710 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;253/265, 2025-08-31 07:54:03.719 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:03.764 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:04.028 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:04.031 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":253,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_253_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:04.107 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 254 2025-08-31 07:54:04.107 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 254 2025-08-31 07:54:04.107 [Thd =215] Info Default 开始扫描条带； [254/265] 2025-08-31 07:54:04.117 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:54:04.120 [Thd =202] Info Default CaptureBeginX: 69.73260, CaptureBeginY:-50.14528, CaptureEndX:-69.54627, CaptureEndY:-50.14528, VectorBeginX:71.29749, VectorBeginY:-50.14528, VectorEndX:-71.50276, VectorEndY:-50.14528, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:54:04.120 [Thd =202] Info Default ***row:254, vectorBeginX:71.297, vectorBeginY:-50.145, captureBeginX:69.733, captureBeginY:-50.145, captureEndX:-69.546, captureEndY:-50.145, vectorEndX:-71.503, vectorEndY:-50.145 2025-08-31 07:54:04.120 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:04.123 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7326031796511,EndPoint:69.5462691090855 2025-08-31 07:54:04.562 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:04.564 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":253,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_253_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:04.800 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:04 2025-08-31 07:54:04.828 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:04 2025-08-31 07:54:08.944 [Thd =33] Info Default Stripes are collected for data processing！strip_no:254 2025-08-31 07:54:08.945 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:254,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:08.945 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:08.945 [Thd =34] Info Default Stripes are collected for data processing！strip_no:254 2025-08-31 07:54:08.945 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:254,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:08.945 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:254,source_light_Type:B_SourceLightType 2025-08-31 07:54:08.945 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：254,B_SourceLightType 2025-08-31 07:54:08.945 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：254,A_SourceLightType 2025-08-31 07:54:08.946 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:254,source_light_Type:A_SourceLightType 2025-08-31 07:54:09.118 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;254/265, 2025-08-31 07:54:09.128 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:09.183 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:09.447 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:09.449 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":254,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_254_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:09.534 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 255 2025-08-31 07:54:09.534 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 255 2025-08-31 07:54:09.534 [Thd =302] Info Default 开始扫描条带； [255/265] 2025-08-31 07:54:09.543 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:54:09.561 [Thd =202] Info Default ***row:255, vectorBeginX:-71.503, vectorBeginY:-50.574, captureBeginX:-69.884, captureBeginY:-50.574, captureEndX:69.395, captureEndY:-50.574, vectorEndX:71.297, vectorEndY:-50.574 2025-08-31 07:54:09.561 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:09.563 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8836933669362,EndPoint:-69.3951789218004 2025-08-31 07:54:09.857 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:09 2025-08-31 07:54:09.871 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:09 2025-08-31 07:54:09.951 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:09.953 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":254,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_254_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:14.386 [Thd =33] Info Default Stripes are collected for data processing！strip_no:255 2025-08-31 07:54:14.386 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:255,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:14.386 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:14.387 [Thd =34] Info Default Stripes are collected for data processing！strip_no:255 2025-08-31 07:54:14.387 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:255,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:14.387 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:255,source_light_Type:B_SourceLightType 2025-08-31 07:54:14.387 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:255,source_light_Type:A_SourceLightType 2025-08-31 07:54:14.387 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：255,B_SourceLightType 2025-08-31 07:54:14.387 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：255,A_SourceLightType 2025-08-31 07:54:14.570 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;255/265, 2025-08-31 07:54:14.580 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:14.619 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:14.894 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:14.896 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":255,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_255_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:14.957 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 256 2025-08-31 07:54:14.957 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 256 2025-08-31 07:54:14.957 [Thd =215] Info Default 开始扫描条带； [256/265] 2025-08-31 07:54:14.977 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:14 2025-08-31 07:54:14.988 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:54:14.989 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:14 2025-08-31 07:54:14.991 [Thd =202] Info Default CaptureBeginX: 69.73262, CaptureBeginY:-51.00190, CaptureEndX:-69.54625, CaptureEndY:-51.00190, VectorBeginX:71.29751, VectorBeginY:-51.00190, VectorEndX:-71.50274, VectorEndY:-51.00190, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:54:14.991 [Thd =202] Info Default ***row:256, vectorBeginX:71.298, vectorBeginY:-51.002, captureBeginX:69.733, captureBeginY:-51.002, captureEndX:-69.546, captureEndY:-51.002, vectorEndX:-71.503, vectorEndY:-51.002 2025-08-31 07:54:14.991 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:14.993 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7326186215456,EndPoint:69.546253667191 2025-08-31 07:54:15.411 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:15.413 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":255,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_255_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:19.816 [Thd =33] Info Default Stripes are collected for data processing！strip_no:256 2025-08-31 07:54:19.816 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:256,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:19.816 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:19.816 [Thd =34] Info Default Stripes are collected for data processing！strip_no:256 2025-08-31 07:54:19.816 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:256,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:19.816 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:256,source_light_Type:B_SourceLightType 2025-08-31 07:54:19.817 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:256,source_light_Type:A_SourceLightType 2025-08-31 07:54:19.817 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：256,B_SourceLightType 2025-08-31 07:54:19.817 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：256,A_SourceLightType 2025-08-31 07:54:19.987 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;256/265, 2025-08-31 07:54:19.996 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:20.025 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:20 2025-08-31 07:54:20.051 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:20.058 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:20 2025-08-31 07:54:20.312 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:20.314 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":256,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_256_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:20.387 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 257 2025-08-31 07:54:20.387 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 257 2025-08-31 07:54:20.387 [Thd =340] Info Default 开始扫描条带； [257/265] 2025-08-31 07:54:20.404 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:54:20.407 [Thd =202] Info Default ***row:257, vectorBeginX:-71.503, vectorBeginY:-51.430, captureBeginX:-69.884, captureBeginY:-51.430, captureEndX:69.395, captureEndY:-51.430, vectorEndX:71.298, vectorEndY:-51.430 2025-08-31 07:54:20.407 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:20.409 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8836770705495,EndPoint:-69.3951952181871 2025-08-31 07:54:20.814 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:20.816 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":256,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_256_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:25.236 [Thd =34] Info Default Stripes are collected for data processing！strip_no:257 2025-08-31 07:54:25.236 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:257,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:25.237 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:25.237 [Thd =33] Info Default Stripes are collected for data processing！strip_no:257 2025-08-31 07:54:25.237 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:257,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:25.237 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:257,source_light_Type:A_SourceLightType 2025-08-31 07:54:25.237 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:257,source_light_Type:B_SourceLightType 2025-08-31 07:54:25.237 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：257,A_SourceLightType 2025-08-31 07:54:25.238 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：257,B_SourceLightType 2025-08-31 07:54:25.412 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;257/265, 2025-08-31 07:54:25.421 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:25.486 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:25.720 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:25.723 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":257,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_257_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:25.822 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 258 2025-08-31 07:54:25.822 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 258 2025-08-31 07:54:25.822 [Thd =311] Info Default 开始扫描条带； [258/265] 2025-08-31 07:54:25.839 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:54:25.842 [Thd =202] Info Default CaptureBeginX: 69.73264, CaptureBeginY:-51.85852, CaptureEndX:-69.54623, CaptureEndY:-51.85852, VectorBeginX:71.29753, VectorBeginY:-51.85852, VectorEndX:-71.50272, VectorEndY:-51.85852, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:54:25.842 [Thd =202] Info Default ***row:258, vectorBeginX:71.298, vectorBeginY:-51.859, captureBeginX:69.733, captureBeginY:-51.859, captureEndX:-69.546, captureEndY:-51.859, vectorEndX:-71.503, vectorEndY:-51.859 2025-08-31 07:54:25.842 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:25.844 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.732642608362,EndPoint:69.5462296803746 2025-08-31 07:54:26.082 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:26 2025-08-31 07:54:26.093 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:26 2025-08-31 07:54:26.242 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:26.244 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":257,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_257_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:30.609 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:30 2025-08-31 07:54:30.641 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:30 2025-08-31 07:54:30.666 [Thd =33] Info Default Stripes are collected for data processing！strip_no:258 2025-08-31 07:54:30.667 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:258,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:30.667 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:30.670 [Thd =34] Info Default Stripes are collected for data processing！strip_no:258 2025-08-31 07:54:30.670 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:258,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:30.670 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:258,source_light_Type:B_SourceLightType 2025-08-31 07:54:30.670 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:258,source_light_Type:A_SourceLightType 2025-08-31 07:54:30.670 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：258,B_SourceLightType 2025-08-31 07:54:30.670 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：258,A_SourceLightType 2025-08-31 07:54:30.836 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;258/265, 2025-08-31 07:54:30.845 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:30.952 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:31.158 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:31.160 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":258,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_258_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:31.291 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 259 2025-08-31 07:54:31.291 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 259 2025-08-31 07:54:31.291 [Thd =265] Info Default 开始扫描条带； [259/265] 2025-08-31 07:54:31.302 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:54:31.305 [Thd =202] Info Default ***row:259, vectorBeginX:-71.503, vectorBeginY:-52.287, captureBeginX:-69.884, captureBeginY:-52.287, captureEndX:69.395, captureEndY:-52.287, vectorEndX:71.298, vectorEndY:-52.287 2025-08-31 07:54:31.306 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:31.307 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8836254958425,EndPoint:-69.3952467928941 2025-08-31 07:54:31.652 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:31.654 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":258,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_258_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:36.126 [Thd =34] Info Default Stripes are collected for data processing！strip_no:259 2025-08-31 07:54:36.126 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:259,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:36.126 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:36.127 [Thd =33] Info Default Stripes are collected for data processing！strip_no:259 2025-08-31 07:54:36.127 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:259,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:36.127 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:259,source_light_Type:A_SourceLightType 2025-08-31 07:54:36.127 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:259,source_light_Type:B_SourceLightType 2025-08-31 07:54:36.127 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：259,A_SourceLightType 2025-08-31 07:54:36.127 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：259,B_SourceLightType 2025-08-31 07:54:36.317 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;259/265, 2025-08-31 07:54:36.327 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:36.378 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:36.635 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:36.637 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":259,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_259_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:36.669 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:36 2025-08-31 07:54:36.682 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:36 2025-08-31 07:54:36.722 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 260 2025-08-31 07:54:36.722 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 260 2025-08-31 07:54:36.722 [Thd =321] Info Default 开始扫描条带； [260/265] 2025-08-31 07:54:36.735 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:54:36.738 [Thd =202] Info Default CaptureBeginX: 69.73270, CaptureBeginY:-52.71514, CaptureEndX:-69.54617, CaptureEndY:-52.71514, VectorBeginX:71.29759, VectorBeginY:-52.71514, VectorEndX:-71.50266, VectorEndY:-52.71514, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:54:36.738 [Thd =202] Info Default ***row:260, vectorBeginX:71.298, vectorBeginY:-52.715, captureBeginX:69.733, captureBeginY:-52.715, captureEndX:-69.546, captureEndY:-52.715, vectorEndX:-71.503, vectorEndY:-52.715 2025-08-31 07:54:36.738 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:36.741 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7327009579714,EndPoint:69.5461713307652 2025-08-31 07:54:37.172 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:37.174 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":259,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_259_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:41.562 [Thd =34] Info Default Stripes are collected for data processing！strip_no:260 2025-08-31 07:54:41.562 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:260,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:41.562 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:41.563 [Thd =33] Info Default Stripes are collected for data processing！strip_no:260 2025-08-31 07:54:41.563 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:260,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:41.563 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:260,source_light_Type:A_SourceLightType 2025-08-31 07:54:41.563 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:260,source_light_Type:B_SourceLightType 2025-08-31 07:54:41.564 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：260,A_SourceLightType 2025-08-31 07:54:41.564 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：260,B_SourceLightType 2025-08-31 07:54:41.742 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;260/265, 2025-08-31 07:54:41.752 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:41.797 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:42.060 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:42.062 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":260,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_260_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:42.138 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 261 2025-08-31 07:54:42.138 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 261 2025-08-31 07:54:42.138 [Thd =299] Info Default 开始扫描条带； [261/265] 2025-08-31 07:54:42.162 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:54:42.165 [Thd =202] Info Default ***row:261, vectorBeginX:-71.503, vectorBeginY:-53.143, captureBeginX:-69.884, captureBeginY:-53.143, captureEndX:69.395, captureEndY:-53.143, vectorEndX:71.298, vectorEndY:-53.143 2025-08-31 07:54:42.165 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:42.167 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8835754470144,EndPoint:-69.3952968417223 2025-08-31 07:54:42.202 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:42 2025-08-31 07:54:42.214 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:42 2025-08-31 07:54:42.566 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:42.569 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":260,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_260_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:46.987 [Thd =34] Info Default Stripes are collected for data processing！strip_no:261 2025-08-31 07:54:46.987 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:261,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:46.987 [Thd =34] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:46.988 [Thd =33] Info Default Stripes are collected for data processing！strip_no:261 2025-08-31 07:54:46.988 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:261,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:46.988 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:261,source_light_Type:A_SourceLightType 2025-08-31 07:54:46.988 [Thd =33] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:261,source_light_Type:B_SourceLightType 2025-08-31 07:54:46.988 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：261,A_SourceLightType 2025-08-31 07:54:46.988 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：261,B_SourceLightType 2025-08-31 07:54:47.162 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;261/265, 2025-08-31 07:54:47.171 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:47.222 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:47.485 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:47.488 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":261,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_261_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:47.560 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 262 2025-08-31 07:54:47.560 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 262 2025-08-31 07:54:47.560 [Thd =302] Info Default 开始扫描条带； [262/265] 2025-08-31 07:54:47.569 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:54:47.572 [Thd =202] Info Default CaptureBeginX: 69.73274, CaptureBeginY:-53.57175, CaptureEndX:-69.54613, CaptureEndY:-53.57175, VectorBeginX:71.29763, VectorBeginY:-53.57175, VectorEndX:-71.50262, VectorEndY:-53.57175, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:54:47.572 [Thd =202] Info Default ***row:262, vectorBeginX:71.298, vectorBeginY:-53.572, captureBeginX:69.733, captureBeginY:-53.572, captureEndX:-69.546, captureEndY:-53.572, vectorEndX:-71.503, vectorEndY:-53.572 2025-08-31 07:54:47.572 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:47.574 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7327419735964,EndPoint:69.5461303151402 2025-08-31 07:54:47.749 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:47 2025-08-31 07:54:47.762 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:47 2025-08-31 07:54:48.008 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:48.011 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":261,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_261_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:52.293 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:52 2025-08-31 07:54:52.309 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:52 2025-08-31 07:54:52.391 [Thd =34] Info Default Stripes are collected for data processing！strip_no:262 2025-08-31 07:54:52.391 [Thd =33] Info Default Stripes are collected for data processing！strip_no:262 2025-08-31 07:54:52.392 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:262,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:52.392 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:52.392 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:262,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:52.392 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:262,source_light_Type:B_SourceLightType 2025-08-31 07:54:52.392 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:262,source_light_Type:A_SourceLightType 2025-08-31 07:54:52.392 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：262,B_SourceLightType 2025-08-31 07:54:52.392 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：262,A_SourceLightType 2025-08-31 07:54:52.562 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;262/265, 2025-08-31 07:54:52.571 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:52.606 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:52.876 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:52.879 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":262,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_262_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:52.943 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 263 2025-08-31 07:54:52.943 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 263 2025-08-31 07:54:52.943 [Thd =299] Info Default 开始扫描条带； [263/265] 2025-08-31 07:54:52.952 [Thd =202] Info Default ScanDirection is Negative 2025-08-31 07:54:52.955 [Thd =202] Info Default ***row:263, vectorBeginX:-71.503, vectorBeginY:-54.000, captureBeginX:-69.884, captureBeginY:-54.000, captureEndX:69.395, captureEndY:-54.000, vectorEndX:71.298, vectorEndY:-54.000 2025-08-31 07:54:52.955 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:52.957 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456300717697,BeginPoint:69.8835260085378,EndPoint:-69.3953462801988 2025-08-31 07:54:53.397 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:53.400 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":262,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_262_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:57.778 [Thd =33] Info Default Stripes are collected for data processing！strip_no:263 2025-08-31 07:54:57.779 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:263,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:57.779 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:54:57.779 [Thd =34] Info Default Stripes are collected for data processing！strip_no:263 2025-08-31 07:54:57.779 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:263,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:54:57.779 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:263,source_light_Type:B_SourceLightType 2025-08-31 07:54:57.779 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:263,source_light_Type:A_SourceLightType 2025-08-31 07:54:57.779 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：263,B_SourceLightType 2025-08-31 07:54:57.779 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：263,A_SourceLightType 2025-08-31 07:54:57.953 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;263/265, 2025-08-31 07:54:57.963 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:54:58.016 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:54:58.267 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:54:58.269 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":263,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_263_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:58.364 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 264 2025-08-31 07:54:58.364 [Thd =202] Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 264 2025-08-31 07:54:58.364 [Thd =320] Info Default 开始扫描条带； [264/265] 2025-08-31 07:54:58.373 [Thd =202] Info Default ScanDirection is Positive 2025-08-31 07:54:58.376 [Thd =202] Info Default CaptureBeginX: 69.73278, CaptureBeginY:-54.42837, CaptureEndX:-69.54609, CaptureEndY:-54.42837, VectorBeginX:71.29767, VectorBeginY:-54.42837, VectorEndX:-71.50258, VectorEndY:-54.42837, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000 2025-08-31 07:54:58.376 [Thd =202] Info Default ***row:264, vectorBeginX:71.298, vectorBeginY:-54.428, captureBeginX:69.733, captureBeginY:-54.428, captureEndX:-69.546, captureEndY:-54.428, vectorEndX:-71.503, vectorEndY:-54.428 2025-08-31 07:54:58.376 [Thd =202] Info Default m_focusMapMode：0 2025-08-31 07:54:58.379 [Thd =202] Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456300717697,BeginPoint:-69.7327827450808,EndPoint:69.5460895436559 2025-08-31 07:54:58.776 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:54:58.778 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":263,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_263_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:54:58.847 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:54:58 2025-08-31 07:54:58.867 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:54:58 2025-08-31 07:55:03.202 [Thd =33] Info Default Stripes are collected for data processing！strip_no:264 2025-08-31 07:55:03.202 [Thd =33] Info Default Singleton.addTask ,m_strip_idx:264,source_light_Type:B_SourceLightType,lockTaskObj:26416594 2025-08-31 07:55:03.202 [Thd =33] Info Default Singleton.addTask ,taskQueue:1 2025-08-31 07:55:03.202 [Thd =34] Info Default Stripes are collected for data processing！strip_no:264 2025-08-31 07:55:03.202 [Thd =34] Info Default Singleton.addTask ,m_strip_idx:264,source_light_Type:A_SourceLightType,lockTaskObj:26416594 2025-08-31 07:55:03.202 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:264,source_light_Type:B_SourceLightType 2025-08-31 07:55:03.202 [Thd =34] Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:264,source_light_Type:A_SourceLightType 2025-08-31 07:55:03.203 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：264,B_SourceLightType 2025-08-31 07:55:03.203 [Thd =56] Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：264,A_SourceLightType 2025-08-31 07:55:03.372 [Thd =202] Info Default Strip scanning complete, waiting for collection... ;264/265, 2025-08-31 07:55:03.381 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 2025-08-31 07:55:03.425 [Thd =202] Info Default singleAixsScan Testing 2 2025-08-31 07:55:03.686 [Thd =39] Info Default --source_light_Type:1,count:1 2025-08-31 07:55:03.688 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":264,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_264_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:55:03.767 [Thd =202] Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 265 2025-08-31 07:55:03.767 [Thd =202] Info Default begin--m_TaskFinish_event---------- 2025-08-31 07:55:03.767 [Thd =340] Info Default 扫描完成,等待结果处理... 2025-08-31 07:55:04.309 [Thd =39] Info Default --source_light_Type:0,count:1 2025-08-31 07:55:04.311 [Thd =39] Info Default Sending data to the MCU,stripInfo:{"strip_no":264,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":319,"count_pack":1316,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-31\\rcp_DB_1\\StripData\\strip_264_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0} 2025-08-31 07:55:04.409 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:55:04 2025-08-31 07:55:04.420 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:55:04 2025-08-31 07:55:04.768 [Thd =202] Info Default end--m_TaskFinish_event---------- 2025-08-31 07:55:06.409 [Thd =202] Info Default ***********Task finished.************** 2025-08-31 07:55:06.409 [Thd =202] Info Default Stop the detection thread; 2025-08-31 07:55:06.471 [Thd =193] Warn Default 还原光源最大功率 2025-08-31 07:55:06.471 [Thd =340] Info Default LaserLamp MaxPower:300 2025-08-31 07:55:07.411 [Thd =299] Info MMSFocus _isStop = true 2025-08-31 07:55:07.472 [Thd =340] Info Default OpenLamp Transmission 2025-08-31 07:55:08.275 [Thd =320] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:55:08.476 [Thd =340] Info Default CloseLamp Reflection 2025-08-31 07:55:09.506 [Thd =338] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:55:10.457 [Thd =299] Info Default QuerySubstrateMode Area OK 2025-08-31 07:55:10.457 [Thd =321] Info Default 已切换到面阵聚焦模式 2025-08-31 07:55:11.007 [Thd =338] Error Default SyncSend recv cmd timeout 2025-08-31 07:55:11.445 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:55:11 2025-08-31 07:55:11.465 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:55:11 2025-08-31 07:55:12.459 [Thd =299] Info Default SetFocusTrack CloseTrack OK 2025-08-31 07:55:12.459 [Thd =338] Info Default 聚焦Track已关闭 2025-08-31 07:55:15.481 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:55:15 2025-08-31 07:55:15.493 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:55:15 2025-08-31 07:55:15.500 [Thd =258] Info Default RecordCompleteStripNo begin:2025-08-31 07:55:15 2025-08-31 07:55:15.510 [Thd =258] Info Default RecordCompleteStripNo end:2025-08-31 07:55:15 2025-08-31 07:55:15.510 [Thd =322] Info Default 等待硬件处理中... 2025-08-31 07:55:18.504 [Thd =290] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:55:18.504 [Thd =290] Error Default InitializeService: : ChangeLightPath to Area error 2025-08-31 07:55:18.504 [Thd =202] Info Default Finally Over！ 2025-08-31 07:55:18.504 [Thd =202] Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over! 2025-08-31 07:55:18.504 [Thd =258] Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Finished 2025-08-31 07:55:18.504 [Thd =258] Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Finished 2025-08-31 07:55:18.504 [Thd =321] Info Default 硬件处理完成。 2025-08-31 07:55:18.505 [Thd =258] Info Default SetSystemStatus:WR DM0 1 2025-08-31 07:55:18.507 [Thd =258] Info Default SetSystemStatus Success 2025-08-31 07:55:18.508 [Thd =338] Info Default 结果处理全部完成！ 2025-08-31 07:55:18.512 [Thd =321] Info Default Chuck vacuum close 2025-08-31 07:55:19.512 [Thd =1] Info Default ChuckVac: :False 2025-08-31 07:55:19.512 [Thd =1] Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished! CurTaskName:4138 2025-08-31 07:55:20.339 [Thd =1] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:55:20.581 [Thd =258] Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down. 2025-08-31 07:55:20.581 [Thd =258] Info Default *********Reset2********** 2025-08-31 07:55:20.581 [Thd =340] Info Default 检测完成！ 2025-08-31 07:55:20.581 [Thd =322] Info Default MCUHelper.ResetMcu(),Restart service！ 2025-08-31 07:55:20.658 [Thd =1] Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished End! CurTaskName:4138 2025-08-31 07:55:22.048 [Thd =262] Error Default EFEM is ready 2025-08-31 07:55:22.048 [Thd =338] Info Default EFEM is ready 2025-08-31 07:55:25.125 [Thd =320] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033183,"ServiceStartTime":"2025\/8\/31 7:28:50","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:25.126 [Thd =338] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033183,"ServiceStartTime":"2025\/8\/31 7:28:49","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:25.126 [Thd =299] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033183,"ServiceStartTime":"2025\/8\/31 7:28:49","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:25.126 [Thd =299] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033183,"ServiceStartTime":"2025\/8\/31 7:30:49","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:27.628 [Thd =262] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033188,"ServiceStartTime":"2025\/8\/31 7:55:24","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:27.659 [Thd =265] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033188,"ServiceStartTime":"2025\/8\/31 7:55:25","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:27.890 [Thd =338] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033188,"ServiceStartTime":"2025\/8\/31 7:55:24","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:28.003 [Thd =321] Error Default The DPU online and offline message was received！{"KeepTimeStamp":2033188,"ServiceStartTime":"2025\/8\/31 7:57:24","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":28,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.8.15.49180.10615.51040"} 2025-08-31 07:55:28.106 [Thd =322] Info Default MCUHelper.ResetMcu(),All Dpus are restarted！ 2025-08-31 07:56:47.460 [Thd =1] Info LensSwitchService Unload Lens Switch Service 2025-08-31 07:56:47.461 [Thd =311] Info Default LaserLamp MaxPower:300,currentPower:0 2025-08-31 07:56:47.480 [Thd =1] Info Default APPLICATION EXITED. 2025-08-31 07:56:59.260 [Thd =19] Info Default InitEnvirment begin time: 2025-08-31 07:56:59.262 [Thd =19] Info Default InitEnvirment end time: 2025-08-31 07:56:59.262 [Thd =18] Info Default APPLICATION LAUNCHED... 2025-08-31 07:56:59.263 [Thd =19] Info Default PluginLoad begin time: 2025-08-31 07:56:59.270 [Thd =19] Info Default PluginLoad end time: 2025-08-31 07:57:07.868 [Thd =18] Info First found plugin {0} and init it.] PLCStandard 2025-08-31 07:57:08.943 [Thd =18] Info Default SetSystemStatus:WR DM0 1 2025-08-31 07:57:08.945 [Thd =18] Info Default SetSystemStatus Success 2025-08-31 07:57:08.946 [Thd =18] Info First found plugin {0} and init it.] VPMMS Focus00 2025-08-31 07:57:08.946 [Thd =24] Info Default 缺少机械手插件，停止LOT在位监听线程 2025-08-31 07:57:08.959 [Thd =18] Info VPMMSFocus MMS Initialize. 2025-08-31 07:57:09.096 [Thd =18] Info First found plugin {0} and init it.] StandardACS 2025-08-31 07:57:09.097 [Thd =18] Info Initialize ACS IP:10.0.0.100 2025-08-31 07:58:16.003 [Thd =18] Info Default load Wafer setting :D:\VPTEK_AOI\VPTEKCONFIG\ACSStandardConfig.json 2025-08-31 07:58:16.027 [Thd =18] Info Default aSwitchIndex index:0 2025-08-31 07:58:16.028 [Thd =18] Info Default lens from ATF: 2025-08-31 07:58:16.028 [Thd =18] Info Default objCount:3 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:P200;objId:0 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:P140;objId:1 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:P100;objId:2 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:;objId:0 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:;objId:0 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:;objId:0 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:;objId:0 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:;objId:0 2025-08-31 07:58:16.029 [Thd =18] Info Default lens from system settings: 2025-08-31 07:58:16.029 [Thd =18] Info Default systemlensettings lens count:3 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:P200;objId:0 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:P140;objId:1 2025-08-31 07:58:16.029 [Thd =18] Info Default ratio:P100;objId:2 2025-08-31 07:58:16.032 [Thd =18] Info Default VPMicroscope Initialize Success 2025-08-31 07:58:17.655 [Thd =18] Error Default SyncSend recv cmd timeout 2025-08-31 07:58:17.655 [Thd =18] Info Default LaserLamp:matchCode：FI91497,LaserSetting.MatchCode:hiZmXFL/G0c= 2025-08-31 07:58:17.660 [Thd =18] Info Default LaserLamp 2:hiZmXFL/G0c= 2025-08-31 07:58:20.163 [Thd =18] Error Default SyncSend recv cmd timeout 2025-08-31 07:58:20.164 [Thd =18] Info Default LaserLamp 4:1561.80000000021 2025-08-31 07:58:20.164 [Thd =18] Info Default LaserLamp 8:10176 2025-08-31 07:58:20.164 [Thd =18] Info Default LaserLamp 16:300 2025-08-31 07:58:20.165 [Thd =18] Info Default LaserLamp MaxPower:300 2025-08-31 07:58:22.436 [Thd =18] Info Default IKAP Camera initialize is true! 2025-08-31 07:58:22.438 [Thd =18] Info Default CurrentBufferCount:50 2025-08-31 07:58:22.456 [Thd =18] Info Default ConfigFile：D:\VPTEK_AOI\VPTEKCONFIG\config1_IKAP.js 2025-08-31 07:58:25.468 [Thd =18] Info Default CurrentBufferCount:50 2025-08-31 07:58:25.475 [Thd =18] Info Default ConfigFile：D:\VPTEK_AOI\VPTEKCONFIG\config0_IKAP.js 2025-08-31 07:58:27.474 [Thd =18] Info Default Using camera: serial: 1839D009, name: TS5MSGV-36M, interface: GigEVision. 2025-08-31 07:58:29.591 [Thd =1] Info LensSwitchService Initialize Lens Switch Service 2025-08-31 07:58:29.936 [Thd =18] Info Default LaserLamp MaxPower:300,currentPower:0 2025-08-31 07:58:30.058 [Thd =1] Info Default Initialize System Service 2025-08-31 07:58:30.060 [Thd =1] Info Default D:\VPTEK_AOI\StormData\DataPrepare 2025-08-31 07:58:31.061 [Thd =1] Info Default ChuckVac: :False 2025-08-31 07:58:31.408 [Thd =37] Error Default EFEM is ready 2025-08-31 07:58:31.408 [Thd =18] Info Default EFEM is ready 2025-08-31 07:58:32.461 [Thd =34] Info Default initialize MCUHelper！ 2025-08-31 07:58:32.475 [Thd =34] Info Default MCUHelper.Init MCUSDK MCUIP:10.0.10.100,MCUPort:8000,LocalIP:,LocalPort:0 2025-08-31 07:58:32.534 [Thd =34] Info Default Connecting to the MCU service succeeded! 2025-08-31 07:58:32.546 [Thd =41] Info Default MCUHelper.ResetMcu(),Restart service！ 2025-08-31 07:58:33.157 [Thd =34] Info Default Register MCU message：SUB_DEVICE_STATUS_CHANGE 2025-08-31 07:58:33.158 [Thd =43] Info Default Register MCU message：SUB_RUNNING_EVENT 2025-08-31 07:58:34.596 [Thd =42] Info Default Register MCU message：SUB_DIE_DB_RESULT 2025-08-31 07:58:34.596 [Thd =1] Info Default VPDMgtService:Storm.Common.VPDMgtServiceHelper,VPDMgtSdk: 2025-08-31 07:58:34.597 [Thd =43] Info Default Register MCU message：SUB_DEVICE_STATUS_CHANGE 2025-08-31 07:58:35.117 [Thd =1] Info Default ===SystemSettingHelper:10023380 2025-08-31 07:58:35.413 [Thd =49] Info Default CloseLamp Transmission 2025-08-31 07:58:36.218 [Thd =43] Info Default PolarizationBaffleControl False: 2! 2025-08-31 07:58:36.416 [Thd =49] Info Default CloseLamp Reflection 2025-08-31 07:58:36.525 [Thd =43] Info Default aSwitchIndex index:0 2025-08-31 07:58:36.526 [Thd =43] Info Default lens from ATF: 2025-08-31 07:58:36.526 [Thd =43] Info Default objCount:3 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:P200;objId:0 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:P140;objId:1 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:P100;objId:2 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:;objId:0 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:;objId:0 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:;objId:0 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:;objId:0 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:;objId:0 2025-08-31 07:58:36.526 [Thd =43] Info Default lens from system settings: 2025-08-31 07:58:36.526 [Thd =43] Info Default systemlensettings lens count:3 2025-08-31 07:58:36.526 [Thd =43] Info Default ratio:P200;objId:0 2025-08-31 07:58:36.527 [Thd =43] Info Default ratio:P140;objId:1 2025-08-31 07:58:36.527 [Thd =43] Info Default ratio:P100;objId:2 2025-08-31 07:58:36.529 [Thd =43] Info AbstractMicroscope Switch Lens:Broadcast Event 2025-08-31 07:58:36.571 [Thd =43] Info AbstractMicroscope Broadcast Event Finished 2025-08-31 07:58:37.419 [Thd =49] Info Default CloseLamp Reflection 2025-08-31 07:58:38.423 [Thd =49] Info Default CloseLamp Transmission 2025-08-31 07:58:40.377 [Thd =46] Error Default EFEM is ready 2025-08-31 07:58:40.378 [Thd =42] Info Default EFEM is ready 2025-08-31 07:58:40.606 [Thd =41] Info Default MCUHelper.ResetMcu(),All Dpus are restarted！ 2025-08-31 07:58:41.534 [Thd =47] Info Default OpenLamp Transmission 2025-08-31 07:58:41.553 [Thd =49] Info Default LaserLamp MaxPower:300,currentPower:150 2025-08-31 07:58:42.337 [Thd =46] Info Default PolarizationBaffleControl True: 3! 2025-08-31 07:58:43.054 [Thd =49] Error Default SyncSend recv cmd timeout 2025-08-31 07:58:45.148 [Thd =47] Error Default Transmission: : Perspec Light unlock fault! 2025-08-31 07:58:47.450 [Thd =48] Error Default ChangeLightPath: : Switch to area cam fault return:-1! 2025-08-31 07:58:47.450 [Thd =48] Info Default ChangeLightPath: False! 2025-08-31 07:59:15.677 [Thd =42] Error Default EFEM is ready 2025-08-31 07:59:15.677 [Thd =37] Info Default EFEM is ready 2025-08-31 07:59:52.123 [Thd =1] Info Default CurrentMenthod:ClassName:Module.Setups_Storm.Views.UCSetupMainMethodName:SelectProductSetup After Memory usage:682.3438MB VirtualMemorySize:134.2 GB 2025-08-31 07:59:52.239 [Thd =1] Error Default SetProductSetup start 2025-08-31 07:59:52.358 [Thd =1] Info Default CaptureCmd,CanExec:True 2025-08-31 07:59:54.607 [Thd =43] Info MMSFocus _isStop = true 2025-08-31 07:59:54.650 [Thd =43] Info Default IKAP Start of stream 2025-08-31 07:59:54.650 [Thd =43] Info Default Preview Camera StartSnap 2025-08-31 07:59:54.691 [Thd =43] Info Default IKAP End of stream 2025-08-31 07:59:54.691 [Thd =43] Info Default Preview Camera StopSnap 2025-08-31 07:59:54.734 [Thd =43] Info Default IKAP Start of stream 2025-08-31 07:59:54.735 [Thd =43] Info Default Preview Camera StartSnap 2025-08-31 07:59:54.739 [Thd =43] Info Default camera_line StartTrigger 2025-08-31 07:59:55.079 [Thd =43] Info Default m_focusMapMode：0 2025-08-31 07:59:55.082 [Thd =43] Info Default Axis Y:5,PulseWidth:0.002,TriggerDistance:0.082975679542,BeginPoint:-175,EndPoint:0 2025-08-31 08:00:05.300 [Thd =43] Error Default CaptureImage4Preview：System.Exception: 相机捕获图像超时！ 在 Picasso.UI.WPF.View.LineThumbnail.CaptureImage() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\Picasso\UI\Picasso.UI.WPF\View\ThumbnailView\CameraThumbnail\ThumbnailScan\LineThumbnail.cs:行号 104 2025-08-31 08:00:05.349 [Thd =43] Info Default IKAP End of stream 2025-08-31 08:00:05.349 [Thd =43] Info Default Preview Camera StopSnap 2025-08-31 08:00:05.396 [Thd =43] Info Default RefLamp Rise: True! 2025-08-31 08:08:09.576 [Thd =34] Info MMSFocus _isStop = true 2025-08-31 08:08:09.618 [Thd =34] Info Default IKAP Start of stream 2025-08-31 08:08:09.618 [Thd =34] Info Default Preview Camera StartSnap 2025-08-31 08:08:09.658 [Thd =34] Info Default IKAP End of stream 2025-08-31 08:08:09.658 [Thd =34] Info Default Preview Camera StopSnap 2025-08-31 08:08:09.700 [Thd =34] Info Default IKAP Start of stream 2025-08-31 08:08:09.700 [Thd =34] Info Default Preview Camera StartSnap 2025-08-31 08:08:09.704 [Thd =34] Info Default camera_line StartTrigger 2025-08-31 08:08:10.044 [Thd =34] Info Default m_focusMapMode：0 2025-08-31 08:08:10.047 [Thd =34] Info Default Axis Y:5,PulseWidth:0.002,TriggerDistance:0.082975679542,BeginPoint:-175,EndPoint:0 2025-08-31 08:08:20.237 [Thd =34] Error Default CaptureImage4Preview：System.Exception: 相机捕获图像超时！ 在 Picasso.UI.WPF.View.LineThumbnail.CaptureImage() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\Picasso\UI\Picasso.UI.WPF\View\ThumbnailView\CameraThumbnail\ThumbnailScan\LineThumbnail.cs:行号 104 2025-08-31 08:08:20.286 [Thd =34] Info Default IKAP End of stream 2025-08-31 08:08:20.286 [Thd =34] Info Default Preview Camera StopSnap 2025-08-31 08:08:20.334 [Thd =34] Info Default RefLamp Rise: True! 2025-08-31 11:15:47.826 [Thd =42] Warn Default 开始移出,移出过程中禁止操作 2025-08-31 11:15:48.826 [Thd =1] Info Default ChuckVac: :False 2025-08-31 11:15:48.827 [Thd =34] Info Default RefLamp Down: True! 2025-08-31 11:15:49.426 [Thd =34] Info MMSFocus _isStop = true 2025-08-31 11:15:49.427 [Thd =34] Info Default StageOut 000 2025-08-31 11:15:49.428 [Thd =34] Info Default StageOut 111 2025-08-31 11:15:49.490 [Thd =34] Info Default StageOut Z 2025-08-31 11:15:50.505 [Thd =34] Info Default StageOut XY:-0.5,-160 2025-08-31 11:15:50.548 [Thd =34] Info Default StageOut VectorA XY 2025-08-31 11:15:50.555 [Thd =34] Info Default StageOut SetVelocity XY 2025-08-31 11:15:51.862 [Thd =34] Info Default The Stage is Moved Out and the Alignment State is Reset!SetupName:6266517-YXC 2025-08-31 11:15:51.862 [Thd =43] Info Default 移出完成 2025-08-31 11:17:56.840 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 2025-08-31 11:17:56.840 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.OnStateChanged(String axis) 2025-08-31 11:18:04.669 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 2025-08-31 11:18:04.669 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.OnStateChanged(String axis) 2025-08-31 11:18:20.785 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 2025-08-31 11:18:20.785 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.OnStateChanged(String axis) 2025-08-31 11:22:58.481 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 2025-08-31 11:22:58.481 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.OnStateChanged(String axis) 2025-08-31 11:23:06.336 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 2025-08-31 11:23:06.336 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.OnStateChanged(String axis) 2025-08-31 11:23:22.455 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 2025-08-31 11:23:22.455 [Thd =21] Error Default Communication closed by the controller 在 ACS.SPiiPlusNET.Api.Š() 在 ACS.SPiiPlusNET.Api.‹(Int32 ) 在 ACS.SPiiPlusNET.Api.GetFPosition(Axis axis) 在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.GetAxisPosition(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.GetAxisMotionParam(String axis) 在 Plugins.WaferStage.Standard.ACS.StandardACS.OnStateChanged(String axis) 2025-08-31 11:32:13.790 [Thd =1] Info LensSwitchService Unload Lens Switch Service 2025-08-31 11:32:13.791 [Thd =49] Info Default LaserLamp MaxPower:300,currentPower:0 2025-08-31 11:32:13.799 [Thd =1] Info Default APPLICATION EXITED.