2025-08-03 08:15:34.585 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 189
2025-08-03 08:15:34.605 [Thd =187]  Info Default  开始扫描条带； [189/238]
2025-08-03 08:15:34.615 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:15:34.617 [Thd =212]  Info Default ***row:189, vectorBeginX:-67.428, vectorBeginY:-28.557, captureBeginX:-65.809, captureBeginY:-28.557, captureEndX:64.768, captureEndY:-28.557, vectorEndX:66.670, vectorEndY:-28.557
2025-08-03 08:15:34.617 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:15:34.619 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8085853733648,EndPoint:-64.7679185456535
2025-08-03 08:15:34.867 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:15:34.870 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":188,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_188_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:35.872 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:15:35
2025-08-03 08:15:35.917 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:15:35
2025-08-03 08:15:39.157 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:189
2025-08-03 08:15:39.157 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:39.158 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:15:39.159 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:189
2025-08-03 08:15:39.159 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:39.159 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:B_SourceLightType
2025-08-03 08:15:39.159 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:A_SourceLightType
2025-08-03 08:15:39.159 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,B_SourceLightType
2025-08-03 08:15:39.159 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,A_SourceLightType
2025-08-03 08:15:39.324 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;189/238,
2025-08-03 08:15:39.333 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:15:39.416 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:15:39.611 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:15:39.614 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_189_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:39.758 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 190
2025-08-03 08:15:39.758 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 190
2025-08-03 08:15:39.758 [Thd =202]  Info Default  开始扫描条带； [190/238]
2025-08-03 08:15:39.784 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:15:39.786 [Thd =212]  Info Default CaptureBeginX: 65.10536, CaptureBeginY:-28.98570, CaptureEndX:-65.47115, CaptureEndY:-28.98570, VectorBeginX:66.67025, VectorBeginY:-28.98570, VectorEndX:-67.42763, VectorEndY:-28.98570, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:15:39.787 [Thd =212]  Info Default ***row:190, vectorBeginX:66.670, vectorBeginY:-28.986, captureBeginX:65.105, captureBeginY:-28.986, captureEndX:-65.471, captureEndY:-28.986, vectorEndX:-67.428, vectorEndY:-28.986
2025-08-03 08:15:39.787 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:15:39.788 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1053589069601,EndPoint:65.4711450120582
2025-08-03 08:15:40.086 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:15:40.089 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_189_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:40.937 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:15:40
2025-08-03 08:15:40.949 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:15:40
2025-08-03 08:15:44.319 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:190
2025-08-03 08:15:44.319 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:44.319 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:15:44.319 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:190
2025-08-03 08:15:44.319 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:44.319 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:A_SourceLightType
2025-08-03 08:15:44.319 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:B_SourceLightType
2025-08-03 08:15:44.319 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,A_SourceLightType
2025-08-03 08:15:44.320 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,B_SourceLightType
2025-08-03 08:15:44.492 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;190/238,
2025-08-03 08:15:44.502 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:15:44.762 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:15:44.780 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:15:44.782 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_190_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:45.101 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 191
2025-08-03 08:15:45.101 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 191
2025-08-03 08:15:45.101 [Thd =202]  Info Default  开始扫描条带； [191/238]
2025-08-03 08:15:45.110 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:15:45.113 [Thd =212]  Info Default ***row:191, vectorBeginX:-67.428, vectorBeginY:-29.414, captureBeginX:-65.809, captureBeginY:-29.414, captureEndX:64.768, captureEndY:-29.414, vectorEndX:66.670, vectorEndY:-29.414
2025-08-03 08:15:45.113 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:15:45.115 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8085500482798,EndPoint:-64.7679538707385
2025-08-03 08:15:45.235 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:15:45.241 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_190_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:45.973 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:15:45
2025-08-03 08:15:46.168 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:15:46
2025-08-03 08:15:49.648 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:191
2025-08-03 08:15:49.648 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:49.648 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:15:49.658 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:191
2025-08-03 08:15:49.658 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:49.658 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:B_SourceLightType
2025-08-03 08:15:49.658 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:A_SourceLightType
2025-08-03 08:15:49.658 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,B_SourceLightType
2025-08-03 08:15:49.658 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,A_SourceLightType
2025-08-03 08:15:49.812 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;191/238,
2025-08-03 08:15:49.822 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:15:49.876 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:15:50.115 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:15:50.117 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_191_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:50.215 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 192
2025-08-03 08:15:50.216 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 192
2025-08-03 08:15:50.216 [Thd =203]  Info Default  开始扫描条带； [192/238]
2025-08-03 08:15:50.225 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:15:50.228 [Thd =212]  Info Default CaptureBeginX: 65.10539, CaptureBeginY:-29.84232, CaptureEndX:-65.47111, CaptureEndY:-29.84232, VectorBeginX:66.67028, VectorBeginY:-29.84232, VectorEndX:-67.42760, VectorEndY:-29.84232, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:15:50.228 [Thd =212]  Info Default ***row:192, vectorBeginX:66.670, vectorBeginY:-29.842, captureBeginX:65.105, captureBeginY:-29.842, captureEndX:-65.471, captureEndY:-29.842, vectorEndX:-67.428, vectorEndY:-29.842
2025-08-03 08:15:50.228 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:15:50.230 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1053942320452,EndPoint:65.4711096869732
2025-08-03 08:15:50.595 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:15:50.599 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_191_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:50.686 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:15:50
2025-08-03 08:15:50.707 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:15:50
2025-08-03 08:15:54.757 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:192
2025-08-03 08:15:54.758 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:54.758 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:15:54.758 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:192
2025-08-03 08:15:54.758 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:54.758 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:A_SourceLightType
2025-08-03 08:15:54.758 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:B_SourceLightType
2025-08-03 08:15:54.758 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,A_SourceLightType
2025-08-03 08:15:54.768 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,B_SourceLightType
2025-08-03 08:15:54.934 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;192/238,
2025-08-03 08:15:54.943 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:15:55.068 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:15:55.212 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:15:55.215 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_192_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:55.405 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 193
2025-08-03 08:15:55.405 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 193
2025-08-03 08:15:55.405 [Thd =202]  Info Default  开始扫描条带； [193/238]
2025-08-03 08:15:55.415 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:15:55.418 [Thd =212]  Info Default ***row:193, vectorBeginX:-67.428, vectorBeginY:-30.271, captureBeginX:-65.809, captureBeginY:-30.271, captureEndX:64.768, captureEndY:-30.271, vectorEndX:66.670, vectorEndY:-30.271
2025-08-03 08:15:55.418 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:15:55.420 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8085147231948,EndPoint:-64.7679891958235
2025-08-03 08:15:55.680 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:15:55.683 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_192_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:15:55.723 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:15:55
2025-08-03 08:15:55.917 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:15:55
2025-08-03 08:15:59.950 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:193
2025-08-03 08:15:59.950 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:59.950 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:15:59.950 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:193
2025-08-03 08:15:59.950 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:15:59.950 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:A_SourceLightType
2025-08-03 08:15:59.950 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:B_SourceLightType
2025-08-03 08:15:59.950 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,A_SourceLightType
2025-08-03 08:15:59.951 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,B_SourceLightType
2025-08-03 08:16:00.123 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;193/238,
2025-08-03 08:16:00.132 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:00.341 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:00.409 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:00.411 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_193_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:00.678 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 194
2025-08-03 08:16:00.678 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 194
2025-08-03 08:16:00.678 [Thd =191]  Info Default  开始扫描条带； [194/238]
2025-08-03 08:16:00.687 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:16:00.690 [Thd =212]  Info Default CaptureBeginX: 65.10543, CaptureBeginY:-30.69895, CaptureEndX:-65.47107, CaptureEndY:-30.69895, VectorBeginX:66.67032, VectorBeginY:-30.69895, VectorEndX:-67.42756, VectorEndY:-30.69895, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:16:00.690 [Thd =212]  Info Default ***row:194, vectorBeginX:66.670, vectorBeginY:-30.699, captureBeginX:65.105, captureBeginY:-30.699, captureEndX:-65.471, captureEndY:-30.699, vectorEndX:-67.428, vectorEndY:-30.699
2025-08-03 08:16:00.690 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:00.693 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1054295571302,EndPoint:65.4710743618881
2025-08-03 08:16:00.872 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:00.875 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_193_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:01.937 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:01
2025-08-03 08:16:01.954 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:01
2025-08-03 08:16:05.226 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:194
2025-08-03 08:16:05.227 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:05.227 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:05.227 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:194
2025-08-03 08:16:05.227 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:05.227 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:B_SourceLightType
2025-08-03 08:16:05.227 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:A_SourceLightType
2025-08-03 08:16:05.227 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,B_SourceLightType
2025-08-03 08:16:05.227 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,A_SourceLightType
2025-08-03 08:16:05.411 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;194/238,
2025-08-03 08:16:05.420 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:05.465 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:05.683 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:05.686 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_194_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:05.810 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 195
2025-08-03 08:16:05.810 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 195
2025-08-03 08:16:05.810 [Thd =23]  Info Default  开始扫描条带； [195/238]
2025-08-03 08:16:05.819 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:16:05.822 [Thd =212]  Info Default ***row:195, vectorBeginX:-67.428, vectorBeginY:-31.127, captureBeginX:-65.808, captureBeginY:-31.127, captureEndX:64.768, captureEndY:-31.127, vectorEndX:66.670, vectorEndY:-31.127
2025-08-03 08:16:05.822 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:05.823 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8084793981097,EndPoint:-64.7680245209086
2025-08-03 08:16:06.160 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:06.163 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_194_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:07.472 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:07
2025-08-03 08:16:07.624 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:07
2025-08-03 08:16:10.353 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:195
2025-08-03 08:16:10.353 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:10.353 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:10.353 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:195
2025-08-03 08:16:10.354 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:10.354 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:A_SourceLightType
2025-08-03 08:16:10.354 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:B_SourceLightType
2025-08-03 08:16:10.354 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,A_SourceLightType
2025-08-03 08:16:10.354 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,B_SourceLightType
2025-08-03 08:16:10.527 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;195/238,
2025-08-03 08:16:10.537 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:10.603 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:10.810 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:10.813 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_195_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:10.952 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 196
2025-08-03 08:16:10.952 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 196
2025-08-03 08:16:10.952 [Thd =185]  Info Default  开始扫描条带； [196/238]
2025-08-03 08:16:10.971 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:16:10.974 [Thd =212]  Info Default CaptureBeginX: 65.10546, CaptureBeginY:-31.55557, CaptureEndX:-65.47104, CaptureEndY:-31.55557, VectorBeginX:66.67035, VectorBeginY:-31.55557, VectorEndX:-67.42753, VectorEndY:-31.55557, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:16:10.974 [Thd =212]  Info Default ***row:196, vectorBeginX:66.670, vectorBeginY:-31.556, captureBeginX:65.105, captureBeginY:-31.556, captureEndX:-65.471, captureEndY:-31.556, vectorEndX:-67.428, vectorEndY:-31.556
2025-08-03 08:16:10.974 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:10.976 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1054648822152,EndPoint:65.4710390368031
2025-08-03 08:16:11.276 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:11.278 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_195_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:11.648 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:11
2025-08-03 08:16:11.868 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:11
2025-08-03 08:16:15.505 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:196
2025-08-03 08:16:15.505 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:15.505 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:15.509 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:196
2025-08-03 08:16:15.509 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:15.509 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:B_SourceLightType
2025-08-03 08:16:15.509 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:A_SourceLightType
2025-08-03 08:16:15.509 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,B_SourceLightType
2025-08-03 08:16:15.509 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,A_SourceLightType
2025-08-03 08:16:15.678 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;196/238,
2025-08-03 08:16:15.688 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:15.875 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:15.961 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:15.964 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_196_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:16.212 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 197
2025-08-03 08:16:16.212 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 197
2025-08-03 08:16:16.212 [Thd =187]  Info Default  开始扫描条带； [197/238]
2025-08-03 08:16:16.221 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:16:16.224 [Thd =212]  Info Default ***row:197, vectorBeginX:-67.428, vectorBeginY:-31.984, captureBeginX:-65.808, captureBeginY:-31.984, captureEndX:64.768, captureEndY:-31.984, vectorEndX:66.670, vectorEndY:-31.984
2025-08-03 08:16:16.224 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:16.227 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8084440730247,EndPoint:-64.7680598459936
2025-08-03 08:16:16.425 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:16.428 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_196_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:17.387 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:17
2025-08-03 08:16:17.579 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:17
2025-08-03 08:16:20.757 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:197
2025-08-03 08:16:20.758 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:197,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:20.758 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:20.758 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:197
2025-08-03 08:16:20.758 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:197,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:20.758 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:197,source_light_Type:B_SourceLightType
2025-08-03 08:16:20.758 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:197,source_light_Type:A_SourceLightType
2025-08-03 08:16:20.758 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：197,B_SourceLightType
2025-08-03 08:16:20.759 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：197,A_SourceLightType
2025-08-03 08:16:20.927 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;197/238,
2025-08-03 08:16:20.941 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:21.075 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:21.219 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:21.222 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":197,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_197_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:21.423 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 198
2025-08-03 08:16:21.423 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 198
2025-08-03 08:16:21.423 [Thd =249]  Info Default  开始扫描条带； [198/238]
2025-08-03 08:16:21.432 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:16:21.435 [Thd =212]  Info Default CaptureBeginX: 65.10550, CaptureBeginY:-32.41220, CaptureEndX:-65.47100, CaptureEndY:-32.41220, VectorBeginX:66.67039, VectorBeginY:-32.41220, VectorEndX:-67.42749, VectorEndY:-32.41220, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:16:21.435 [Thd =212]  Info Default ***row:198, vectorBeginX:66.670, vectorBeginY:-32.412, captureBeginX:65.106, captureBeginY:-32.412, captureEndX:-65.471, captureEndY:-32.412, vectorEndX:-67.427, vectorEndY:-32.412
2025-08-03 08:16:21.435 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:21.438 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1055002073003,EndPoint:65.471003711718
2025-08-03 08:16:21.681 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:21.684 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":197,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_197_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:22.106 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:22
2025-08-03 08:16:22.156 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:22
2025-08-03 08:16:25.981 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:198
2025-08-03 08:16:25.981 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:198,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:25.981 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:25.988 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:198
2025-08-03 08:16:25.988 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:198,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:25.988 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:198,source_light_Type:B_SourceLightType
2025-08-03 08:16:25.988 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:198,source_light_Type:A_SourceLightType
2025-08-03 08:16:25.988 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：198,B_SourceLightType
2025-08-03 08:16:25.988 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：198,A_SourceLightType
2025-08-03 08:16:26.152 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;198/238,
2025-08-03 08:16:26.162 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:26.356 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:26.450 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:26.453 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":198,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_198_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:26.705 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 199
2025-08-03 08:16:26.705 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 199
2025-08-03 08:16:26.705 [Thd =23]  Info Default  开始扫描条带； [199/238]
2025-08-03 08:16:26.716 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:16:26.719 [Thd =212]  Info Default ***row:199, vectorBeginX:-67.427, vectorBeginY:-32.841, captureBeginX:-65.808, captureBeginY:-32.841, captureEndX:64.768, captureEndY:-32.841, vectorEndX:66.670, vectorEndY:-32.841
2025-08-03 08:16:26.719 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:26.720 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8084087479397,EndPoint:-64.7680951710786
2025-08-03 08:16:26.926 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:26.929 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":198,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_198_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:28.181 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:28
2025-08-03 08:16:28.201 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:28
2025-08-03 08:16:31.256 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:199
2025-08-03 08:16:31.256 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:199,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:31.256 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:31.257 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:199
2025-08-03 08:16:31.257 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:199,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:31.257 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:199,source_light_Type:B_SourceLightType
2025-08-03 08:16:31.257 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：199,B_SourceLightType
2025-08-03 08:16:31.257 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：199,A_SourceLightType
2025-08-03 08:16:31.258 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:199,source_light_Type:A_SourceLightType
2025-08-03 08:16:31.427 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;199/238,
2025-08-03 08:16:31.437 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:31.606 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:31.712 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:31.714 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":199,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_199_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:31.954 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 200
2025-08-03 08:16:31.954 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 200
2025-08-03 08:16:31.954 [Thd =249]  Info Default  开始扫描条带； [200/238]
2025-08-03 08:16:31.963 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:16:31.966 [Thd =212]  Info Default CaptureBeginX: 65.10554, CaptureBeginY:-33.26882, CaptureEndX:-65.47097, CaptureEndY:-33.26882, VectorBeginX:66.67043, VectorBeginY:-33.26882, VectorEndX:-67.42746, VectorEndY:-33.26882, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:16:31.966 [Thd =212]  Info Default ***row:200, vectorBeginX:66.670, vectorBeginY:-33.269, captureBeginX:65.106, captureBeginY:-33.269, captureEndX:-65.471, captureEndY:-33.269, vectorEndX:-67.427, vectorEndY:-33.269
2025-08-03 08:16:31.966 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:31.968 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1055355323853,EndPoint:65.470968386633
2025-08-03 08:16:32.180 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:32.182 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":199,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_199_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:32.720 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:32
2025-08-03 08:16:32.843 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:32
2025-08-03 08:16:36.497 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:200
2025-08-03 08:16:36.497 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:200
2025-08-03 08:16:36.497 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:200,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:36.498 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:36.498 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:200,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:36.498 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:200,source_light_Type:B_SourceLightType
2025-08-03 08:16:36.498 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:200,source_light_Type:A_SourceLightType
2025-08-03 08:16:36.498 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：200,B_SourceLightType
2025-08-03 08:16:36.498 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：200,A_SourceLightType
2025-08-03 08:16:36.676 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;200/238,
2025-08-03 08:16:36.685 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:36.827 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:36.963 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:36.966 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":200,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_200_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:37.189 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 201
2025-08-03 08:16:37.189 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 201
2025-08-03 08:16:37.190 [Thd =207]  Info Default  开始扫描条带； [201/238]
2025-08-03 08:16:37.198 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:16:37.201 [Thd =212]  Info Default ***row:201, vectorBeginX:-67.427, vectorBeginY:-33.697, captureBeginX:-65.808, captureBeginY:-33.697, captureEndX:64.768, captureEndY:-33.697, vectorEndX:66.670, vectorEndY:-33.697
2025-08-03 08:16:37.201 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:37.203 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8083734228546,EndPoint:-64.7681304961637
2025-08-03 08:16:37.427 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:37.430 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":200,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_200_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:37.861 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:37
2025-08-03 08:16:38.029 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:38
2025-08-03 08:16:41.739 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:201
2025-08-03 08:16:41.740 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:201,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:41.740 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:41.741 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:201
2025-08-03 08:16:41.741 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:201,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:41.741 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:201,source_light_Type:B_SourceLightType
2025-08-03 08:16:41.741 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:201,source_light_Type:A_SourceLightType
2025-08-03 08:16:41.741 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：201,B_SourceLightType
2025-08-03 08:16:41.741 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：201,A_SourceLightType
2025-08-03 08:16:41.908 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;201/238,
2025-08-03 08:16:41.917 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:42.082 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:42.185 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:42.198 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":201,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_201_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:42.425 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 202
2025-08-03 08:16:42.425 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 202
2025-08-03 08:16:42.425 [Thd =207]  Info Default  开始扫描条带； [202/238]
2025-08-03 08:16:42.444 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:16:42.446 [Thd =212]  Info Default CaptureBeginX: 65.10557, CaptureBeginY:-34.12545, CaptureEndX:-65.47093, CaptureEndY:-34.12545, VectorBeginX:66.67046, VectorBeginY:-34.12545, VectorEndX:-67.42742, VectorEndY:-34.12545, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:16:42.446 [Thd =212]  Info Default ***row:202, vectorBeginX:66.670, vectorBeginY:-34.125, captureBeginX:65.106, captureBeginY:-34.125, captureEndX:-65.471, captureEndY:-34.125, vectorEndX:-67.427, vectorEndY:-34.125
2025-08-03 08:16:42.447 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:42.449 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1055708574703,EndPoint:65.470933061548
2025-08-03 08:16:42.648 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:42.652 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":201,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_201_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:43.548 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:43
2025-08-03 08:16:43.646 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:43
2025-08-03 08:16:46.977 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:202
2025-08-03 08:16:46.977 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:202,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:46.977 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:46.979 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:202
2025-08-03 08:16:46.979 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:202,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:46.979 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:202,source_light_Type:B_SourceLightType
2025-08-03 08:16:46.979 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:202,source_light_Type:A_SourceLightType
2025-08-03 08:16:46.979 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：202,B_SourceLightType
2025-08-03 08:16:46.979 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：202,A_SourceLightType
2025-08-03 08:16:47.152 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;202/238,
2025-08-03 08:16:47.161 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:47.279 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:47.433 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:47.436 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":202,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_202_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:47.631 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 203
2025-08-03 08:16:47.631 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 203
2025-08-03 08:16:47.631 [Thd =206]  Info Default  开始扫描条带； [203/238]
2025-08-03 08:16:47.640 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:16:47.643 [Thd =212]  Info Default ***row:203, vectorBeginX:-67.427, vectorBeginY:-34.554, captureBeginX:-65.808, captureBeginY:-34.554, captureEndX:64.768, captureEndY:-34.554, vectorEndX:66.670, vectorEndY:-34.554
2025-08-03 08:16:47.643 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:47.644 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8083380977696,EndPoint:-64.7681658212487
2025-08-03 08:16:47.666 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:47
2025-08-03 08:16:47.675 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:47
2025-08-03 08:16:47.907 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:47.909 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":202,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_202_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:52.173 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:203
2025-08-03 08:16:52.173 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:203,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:52.173 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:52.173 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:203
2025-08-03 08:16:52.174 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:203,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:52.174 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:203,source_light_Type:A_SourceLightType
2025-08-03 08:16:52.174 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:203,source_light_Type:B_SourceLightType
2025-08-03 08:16:52.174 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：203,A_SourceLightType
2025-08-03 08:16:52.174 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：203,B_SourceLightType
2025-08-03 08:16:52.354 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;203/238,
2025-08-03 08:16:52.364 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:52.495 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:52.627 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:52.630 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":203,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_203_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:52.837 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 204
2025-08-03 08:16:52.837 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 204
2025-08-03 08:16:52.837 [Thd =206]  Info Default  开始扫描条带； [204/238]
2025-08-03 08:16:52.846 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:16:52.849 [Thd =212]  Info Default CaptureBeginX: 65.10561, CaptureBeginY:-34.98207, CaptureEndX:-65.47090, CaptureEndY:-34.98207, VectorBeginX:66.67050, VectorBeginY:-34.98207, VectorEndX:-67.42739, VectorEndY:-34.98207, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:16:52.849 [Thd =212]  Info Default ***row:204, vectorBeginX:66.670, vectorBeginY:-34.982, captureBeginX:65.106, captureBeginY:-34.982, captureEndX:-65.471, captureEndY:-34.982, vectorEndX:-67.427, vectorEndY:-34.982
2025-08-03 08:16:52.849 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:52.850 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1056061825554,EndPoint:65.4708977364629
2025-08-03 08:16:53.095 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:53.098 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":203,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_203_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:53.200 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:53
2025-08-03 08:16:53.219 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:53
2025-08-03 08:16:57.377 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:204
2025-08-03 08:16:57.378 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:204,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:57.378 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:16:57.378 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:204
2025-08-03 08:16:57.378 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:204,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:16:57.378 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:204,source_light_Type:A_SourceLightType
2025-08-03 08:16:57.378 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:204,source_light_Type:B_SourceLightType
2025-08-03 08:16:57.378 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：204,A_SourceLightType
2025-08-03 08:16:57.379 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：204,B_SourceLightType
2025-08-03 08:16:57.547 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;204/238,
2025-08-03 08:16:57.559 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:16:57.726 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:16:57.839 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:16:57.842 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":204,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_204_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:58.061 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 205
2025-08-03 08:16:58.061 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 205
2025-08-03 08:16:58.061 [Thd =187]  Info Default  开始扫描条带； [205/238]
2025-08-03 08:16:58.078 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:16:58.081 [Thd =212]  Info Default ***row:205, vectorBeginX:-67.427, vectorBeginY:-35.410, captureBeginX:-65.808, captureBeginY:-35.410, captureEndX:64.768, captureEndY:-35.410, vectorEndX:66.671, vectorEndY:-35.410
2025-08-03 08:16:58.081 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:16:58.084 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8083027726846,EndPoint:-64.7682011463338
2025-08-03 08:16:58.304 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:16:58.307 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":204,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_204_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:16:59.256 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:16:59
2025-08-03 08:16:59.344 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:16:59
2025-08-03 08:17:02.618 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:205
2025-08-03 08:17:02.618 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:205,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:02.618 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:02.619 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:205
2025-08-03 08:17:02.619 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:205,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:02.619 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:205,source_light_Type:A_SourceLightType
2025-08-03 08:17:02.619 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：205,A_SourceLightType
2025-08-03 08:17:02.619 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：205,B_SourceLightType
2025-08-03 08:17:02.619 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:205,source_light_Type:B_SourceLightType
2025-08-03 08:17:02.792 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;205/238,
2025-08-03 08:17:02.801 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:02.865 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:03.087 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:03.089 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":205,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_205_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:03.209 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 206
2025-08-03 08:17:03.209 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 206
2025-08-03 08:17:03.209 [Thd =203]  Info Default  开始扫描条带； [206/238]
2025-08-03 08:17:03.224 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:17:03.227 [Thd =212]  Info Default CaptureBeginX: 65.10564, CaptureBeginY:-35.83870, CaptureEndX:-65.47086, CaptureEndY:-35.83870, VectorBeginX:66.67053, VectorBeginY:-35.83870, VectorEndX:-67.42735, VectorEndY:-35.83870, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:17:03.227 [Thd =212]  Info Default ***row:206, vectorBeginX:66.671, vectorBeginY:-35.839, captureBeginX:65.106, captureBeginY:-35.839, captureEndX:-65.471, captureEndY:-35.839, vectorEndX:-67.427, vectorEndY:-35.839
2025-08-03 08:17:03.227 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:03.228 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1056415076404,EndPoint:65.4708624113779
2025-08-03 08:17:03.571 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:03.573 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":205,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_205_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:04.365 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:04
2025-08-03 08:17:04.507 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:04
2025-08-03 08:17:07.757 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:206
2025-08-03 08:17:07.757 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:206,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:07.757 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:07.759 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:206
2025-08-03 08:17:07.759 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:206,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:07.759 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:206,source_light_Type:B_SourceLightType
2025-08-03 08:17:07.759 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:206,source_light_Type:A_SourceLightType
2025-08-03 08:17:07.760 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：206,B_SourceLightType
2025-08-03 08:17:07.760 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：206,A_SourceLightType
2025-08-03 08:17:07.939 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;206/238,
2025-08-03 08:17:07.949 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:07.990 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:08.216 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:08.218 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":206,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_206_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:08.325 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 207
2025-08-03 08:17:08.325 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 207
2025-08-03 08:17:08.325 [Thd =205]  Info Default  开始扫描条带； [207/238]
2025-08-03 08:17:08.334 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:17:08.337 [Thd =212]  Info Default ***row:207, vectorBeginX:-67.427, vectorBeginY:-36.267, captureBeginX:-65.808, captureBeginY:-36.267, captureEndX:64.768, captureEndY:-36.267, vectorEndX:66.671, vectorEndY:-36.267
2025-08-03 08:17:08.337 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:08.339 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8082674475995,EndPoint:-64.7682364714188
2025-08-03 08:17:08.698 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:08.701 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":206,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_206_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:10.056 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:10
2025-08-03 08:17:10.181 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:10
2025-08-03 08:17:12.875 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:207
2025-08-03 08:17:12.875 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:207,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:12.876 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:12.876 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:207
2025-08-03 08:17:12.876 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:207,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:12.876 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:207,source_light_Type:A_SourceLightType
2025-08-03 08:17:12.876 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:207,source_light_Type:B_SourceLightType
2025-08-03 08:17:12.876 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：207,A_SourceLightType
2025-08-03 08:17:12.876 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：207,B_SourceLightType
2025-08-03 08:17:13.054 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;207/238,
2025-08-03 08:17:13.063 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:13.108 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:13.332 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:13.335 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":207,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_207_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:13.441 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 208
2025-08-03 08:17:13.441 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 208
2025-08-03 08:17:13.441 [Thd =192]  Info Default  开始扫描条带； [208/238]
2025-08-03 08:17:13.450 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:17:13.453 [Thd =212]  Info Default CaptureBeginX: 65.10568, CaptureBeginY:-36.69532, CaptureEndX:-65.47083, CaptureEndY:-36.69532, VectorBeginX:66.67057, VectorBeginY:-36.69532, VectorEndX:-67.42732, VectorEndY:-36.69532, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:17:13.453 [Thd =212]  Info Default ***row:208, vectorBeginX:66.671, vectorBeginY:-36.695, captureBeginX:65.106, captureBeginY:-36.695, captureEndX:-65.471, captureEndY:-36.695, vectorEndX:-67.427, vectorEndY:-36.695
2025-08-03 08:17:13.453 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:13.455 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1056768327255,EndPoint:65.4708270862929
2025-08-03 08:17:13.812 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:13.814 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":207,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_207_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:14.696 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:14
2025-08-03 08:17:14.893 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:14
2025-08-03 08:17:17.986 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:208
2025-08-03 08:17:17.986 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:208,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:17.986 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:17.995 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:208
2025-08-03 08:17:17.996 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:208,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:17.996 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:208,source_light_Type:B_SourceLightType
2025-08-03 08:17:17.996 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：208,B_SourceLightType
2025-08-03 08:17:17.996 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：208,A_SourceLightType
2025-08-03 08:17:17.996 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:208,source_light_Type:A_SourceLightType
2025-08-03 08:17:18.157 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;208/238,
2025-08-03 08:17:18.166 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:18.269 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:18.452 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:18.455 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":208,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_208_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:18.614 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 209
2025-08-03 08:17:18.614 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 209
2025-08-03 08:17:18.614 [Thd =246]  Info Default  开始扫描条带； [209/238]
2025-08-03 08:17:18.623 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:17:18.626 [Thd =212]  Info Default ***row:209, vectorBeginX:-67.427, vectorBeginY:-37.124, captureBeginX:-65.808, captureBeginY:-37.124, captureEndX:64.768, captureEndY:-37.124, vectorEndX:66.671, vectorEndY:-37.124
2025-08-03 08:17:18.626 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:18.628 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8082321225145,EndPoint:-64.7682717965038
2025-08-03 08:17:18.924 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:18.926 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":208,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_208_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:20.424 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:20
2025-08-03 08:17:20.541 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:20
2025-08-03 08:17:23.163 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:209
2025-08-03 08:17:23.163 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:209
2025-08-03 08:17:23.164 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:209,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:23.164 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:23.164 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:209,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:23.164 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:209,source_light_Type:B_SourceLightType
2025-08-03 08:17:23.164 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:209,source_light_Type:A_SourceLightType
2025-08-03 08:17:23.164 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：209,B_SourceLightType
2025-08-03 08:17:23.164 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：209,A_SourceLightType
2025-08-03 08:17:23.337 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;209/238,
2025-08-03 08:17:23.346 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:23.493 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:23.623 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:23.625 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":209,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_209_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:23.828 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 210
2025-08-03 08:17:23.828 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 210
2025-08-03 08:17:23.828 [Thd =249]  Info Default  开始扫描条带； [210/238]
2025-08-03 08:17:23.846 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:17:23.848 [Thd =212]  Info Default CaptureBeginX: 65.10571, CaptureBeginY:-37.55195, CaptureEndX:-65.47079, CaptureEndY:-37.55195, VectorBeginX:66.67060, VectorBeginY:-37.55195, VectorEndX:-67.42728, VectorEndY:-37.55195, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:17:23.848 [Thd =212]  Info Default ***row:210, vectorBeginX:66.671, vectorBeginY:-37.552, captureBeginX:65.106, captureBeginY:-37.552, captureEndX:-65.471, captureEndY:-37.552, vectorEndX:-67.427, vectorEndY:-37.552
2025-08-03 08:17:23.849 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:23.850 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1057121578105,EndPoint:65.4707917612078
2025-08-03 08:17:24.090 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:24.093 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":209,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_209_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:25.068 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:25
2025-08-03 08:17:25.081 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:25
2025-08-03 08:17:28.394 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:210
2025-08-03 08:17:28.394 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:210,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:28.394 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:28.396 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:210
2025-08-03 08:17:28.396 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:210,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:28.396 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:210,source_light_Type:B_SourceLightType
2025-08-03 08:17:28.396 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:210,source_light_Type:A_SourceLightType
2025-08-03 08:17:28.396 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：210,B_SourceLightType
2025-08-03 08:17:28.397 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：210,A_SourceLightType
2025-08-03 08:17:28.554 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;210/238,
2025-08-03 08:17:28.563 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:28.597 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:28.842 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:28.845 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":210,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_210_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:28.943 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 211
2025-08-03 08:17:28.943 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 211
2025-08-03 08:17:28.943 [Thd =174]  Info Default  开始扫描条带； [211/238]
2025-08-03 08:17:28.952 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:17:28.955 [Thd =212]  Info Default ***row:211, vectorBeginX:-67.427, vectorBeginY:-37.980, captureBeginX:-65.808, captureBeginY:-37.980, captureEndX:64.768, captureEndY:-37.980, vectorEndX:66.671, vectorEndY:-37.980
2025-08-03 08:17:28.955 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:28.957 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8081967974294,EndPoint:-64.7683071215889
2025-08-03 08:17:29.334 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:29.337 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":210,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_210_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:30.613 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:30
2025-08-03 08:17:30.762 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:30
2025-08-03 08:17:33.498 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:211
2025-08-03 08:17:33.499 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:211,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:33.499 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:33.501 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:211
2025-08-03 08:17:33.501 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:211,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:33.501 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:211,source_light_Type:B_SourceLightType
2025-08-03 08:17:33.501 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:211,source_light_Type:A_SourceLightType
2025-08-03 08:17:33.502 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：211,B_SourceLightType
2025-08-03 08:17:33.502 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：211,A_SourceLightType
2025-08-03 08:17:33.672 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;211/238,
2025-08-03 08:17:33.682 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:33.718 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:33.957 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:33.960 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":211,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_211_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:34.058 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 212
2025-08-03 08:17:34.058 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 212
2025-08-03 08:17:34.058 [Thd =252]  Info Default  开始扫描条带； [212/238]
2025-08-03 08:17:34.067 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:17:34.069 [Thd =212]  Info Default CaptureBeginX: 65.10575, CaptureBeginY:-38.40858, CaptureEndX:-65.47076, CaptureEndY:-38.40858, VectorBeginX:66.67064, VectorBeginY:-38.40858, VectorEndX:-67.42725, VectorEndY:-38.40858, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:17:34.069 [Thd =212]  Info Default ***row:212, vectorBeginX:66.671, vectorBeginY:-38.409, captureBeginX:65.106, captureBeginY:-38.409, captureEndX:-65.471, captureEndY:-38.409, vectorEndX:-67.427, vectorEndY:-38.409
2025-08-03 08:17:34.069 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:34.070 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1057474828955,EndPoint:65.4707564361228
2025-08-03 08:17:34.275 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:34
2025-08-03 08:17:34.303 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:34
2025-08-03 08:17:34.439 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:34.441 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":211,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_211_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:38.600 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:212
2025-08-03 08:17:38.600 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:212,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:38.600 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:38.605 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:212
2025-08-03 08:17:38.605 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:212,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:38.617 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:212,source_light_Type:B_SourceLightType
2025-08-03 08:17:38.617 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:212,source_light_Type:A_SourceLightType
2025-08-03 08:17:38.618 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：212,B_SourceLightType
2025-08-03 08:17:38.618 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：212,A_SourceLightType
2025-08-03 08:17:38.776 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;212/238,
2025-08-03 08:17:38.785 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:38.942 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:39.065 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:39.068 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":212,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_212_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:39.289 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 213
2025-08-03 08:17:39.289 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 213
2025-08-03 08:17:39.289 [Thd =217]  Info Default  开始扫描条带； [213/238]
2025-08-03 08:17:39.298 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:17:39.301 [Thd =212]  Info Default ***row:213, vectorBeginX:-67.427, vectorBeginY:-38.837, captureBeginX:-65.808, captureBeginY:-38.837, captureEndX:64.768, captureEndY:-38.837, vectorEndX:66.671, vectorEndY:-38.837
2025-08-03 08:17:39.301 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:39.302 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8081614723444,EndPoint:-64.7683424466739
2025-08-03 08:17:39.533 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:39.536 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":212,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_212_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:40.322 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:40
2025-08-03 08:17:40.677 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:40
2025-08-03 08:17:43.831 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:213
2025-08-03 08:17:43.831 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:213,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:43.831 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:43.833 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:213
2025-08-03 08:17:43.833 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:213,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:43.833 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:213,source_light_Type:B_SourceLightType
2025-08-03 08:17:43.833 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:213,source_light_Type:A_SourceLightType
2025-08-03 08:17:43.833 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：213,B_SourceLightType
2025-08-03 08:17:43.833 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：213,A_SourceLightType
2025-08-03 08:17:44.010 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;213/238,
2025-08-03 08:17:44.020 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:44.183 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:44.292 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:44.294 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":213,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_213_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:44.531 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 214
2025-08-03 08:17:44.531 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 214
2025-08-03 08:17:44.531 [Thd =207]  Info Default  开始扫描条带； [214/238]
2025-08-03 08:17:44.540 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:17:44.542 [Thd =212]  Info Default CaptureBeginX: 65.10578, CaptureBeginY:-39.26520, CaptureEndX:-65.47072, CaptureEndY:-39.26520, VectorBeginX:66.67067, VectorBeginY:-39.26520, VectorEndX:-67.42721, VectorEndY:-39.26520, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:17:44.542 [Thd =212]  Info Default ***row:214, vectorBeginX:66.671, vectorBeginY:-39.265, captureBeginX:65.106, captureBeginY:-39.265, captureEndX:-65.471, captureEndY:-39.265, vectorEndX:-67.427, vectorEndY:-39.265
2025-08-03 08:17:44.542 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:44.544 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1057828079806,EndPoint:65.4707211110377
2025-08-03 08:17:44.756 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:44.759 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":213,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_213_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:45.705 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:45
2025-08-03 08:17:45.725 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:45
2025-08-03 08:17:49.076 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:214
2025-08-03 08:17:49.077 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:214,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:49.077 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:49.077 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:214
2025-08-03 08:17:49.078 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:214,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:49.078 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:214,source_light_Type:A_SourceLightType
2025-08-03 08:17:49.078 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:214,source_light_Type:B_SourceLightType
2025-08-03 08:17:49.078 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：214,A_SourceLightType
2025-08-03 08:17:49.078 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：214,B_SourceLightType
2025-08-03 08:17:49.247 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;214/238,
2025-08-03 08:17:49.257 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:49.424 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:49.530 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:49.533 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":214,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_214_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:49.762 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 215
2025-08-03 08:17:49.762 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 215
2025-08-03 08:17:49.762 [Thd =207]  Info Default  开始扫描条带； [215/238]
2025-08-03 08:17:49.771 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:17:49.774 [Thd =212]  Info Default ***row:215, vectorBeginX:-67.427, vectorBeginY:-39.694, captureBeginX:-65.808, captureBeginY:-39.694, captureEndX:64.768, captureEndY:-39.694, vectorEndX:66.671, vectorEndY:-39.694
2025-08-03 08:17:49.774 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:49.776 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8081261472594,EndPoint:-64.7683777717589
2025-08-03 08:17:49.994 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:49.997 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":214,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_214_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:51.254 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:51
2025-08-03 08:17:51.334 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:51
2025-08-03 08:17:54.305 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:215
2025-08-03 08:17:54.305 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:215
2025-08-03 08:17:54.305 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:215,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:54.306 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:54.306 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:215,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:54.306 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:215,source_light_Type:A_SourceLightType
2025-08-03 08:17:54.306 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:215,source_light_Type:B_SourceLightType
2025-08-03 08:17:54.306 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：215,A_SourceLightType
2025-08-03 08:17:54.306 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：215,B_SourceLightType
2025-08-03 08:17:54.476 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;215/238,
2025-08-03 08:17:54.492 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:54.533 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:54.762 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:54.764 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":215,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_215_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:54.889 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 216
2025-08-03 08:17:54.889 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 216
2025-08-03 08:17:54.889 [Thd =203]  Info Default  开始扫描条带； [216/238]
2025-08-03 08:17:54.898 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:17:54.901 [Thd =212]  Info Default CaptureBeginX: 65.10582, CaptureBeginY:-40.12183, CaptureEndX:-65.47069, CaptureEndY:-40.12183, VectorBeginX:66.67071, VectorBeginY:-40.12183, VectorEndX:-67.42717, VectorEndY:-40.12183, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:17:54.901 [Thd =212]  Info Default ***row:216, vectorBeginX:66.671, vectorBeginY:-40.122, captureBeginX:65.106, captureBeginY:-40.122, captureEndX:-65.471, captureEndY:-40.122, vectorEndX:-67.427, vectorEndY:-40.122
2025-08-03 08:17:54.901 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:17:54.903 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1058181330656,EndPoint:65.4706857859527
2025-08-03 08:17:55.237 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:17:55.239 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":215,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_215_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:17:55.852 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:17:55
2025-08-03 08:17:55.994 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:17:55
2025-08-03 08:17:59.435 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:216
2025-08-03 08:17:59.435 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:216,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:59.435 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:17:59.435 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:216
2025-08-03 08:17:59.436 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:216,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:17:59.436 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:216,source_light_Type:A_SourceLightType
2025-08-03 08:17:59.436 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:216,source_light_Type:B_SourceLightType
2025-08-03 08:17:59.436 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：216,A_SourceLightType
2025-08-03 08:17:59.436 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：216,B_SourceLightType
2025-08-03 08:17:59.611 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;216/238,
2025-08-03 08:17:59.621 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:17:59.876 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:17:59.899 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:17:59.902 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":216,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_216_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:00.213 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 217
2025-08-03 08:18:00.213 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 217
2025-08-03 08:18:00.213 [Thd =203]  Info Default  开始扫描条带； [217/238]
2025-08-03 08:18:00.222 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:18:00.225 [Thd =212]  Info Default ***row:217, vectorBeginX:-67.427, vectorBeginY:-40.550, captureBeginX:-65.808, captureBeginY:-40.550, captureEndX:64.768, captureEndY:-40.550, vectorEndX:66.671, vectorEndY:-40.550
2025-08-03 08:18:00.225 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:00.227 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8080908221743,EndPoint:-64.768413096844
2025-08-03 08:18:00.387 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:00.389 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":216,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_216_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:01.019 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:01
2025-08-03 08:18:01.105 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:01
2025-08-03 08:18:04.761 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:217
2025-08-03 08:18:04.761 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:217,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:04.761 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:04.762 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:217
2025-08-03 08:18:04.762 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:217,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:04.763 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:217,source_light_Type:B_SourceLightType
2025-08-03 08:18:04.763 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:217,source_light_Type:A_SourceLightType
2025-08-03 08:18:04.766 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：217,B_SourceLightType
2025-08-03 08:18:04.766 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：217,A_SourceLightType
2025-08-03 08:18:04.934 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;217/238,
2025-08-03 08:18:04.944 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:04.985 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:05.215 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:05.218 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":217,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_217_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:05.342 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 218
2025-08-03 08:18:05.342 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 218
2025-08-03 08:18:05.342 [Thd =23]  Info Default  开始扫描条带； [218/238]
2025-08-03 08:18:05.360 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:18:05.363 [Thd =212]  Info Default CaptureBeginX: 65.10585, CaptureBeginY:-40.97845, CaptureEndX:-65.47065, CaptureEndY:-40.97845, VectorBeginX:66.67074, VectorBeginY:-40.97845, VectorEndX:-67.42714, VectorEndY:-40.97845, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:18:05.363 [Thd =212]  Info Default ***row:218, vectorBeginX:66.671, vectorBeginY:-40.978, captureBeginX:65.106, captureBeginY:-40.978, captureEndX:-65.471, captureEndY:-40.978, vectorEndX:-67.427, vectorEndY:-40.978
2025-08-03 08:18:05.363 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:05.365 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1058534581506,EndPoint:65.4706504608677
2025-08-03 08:18:05.696 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:05.699 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":217,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_217_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:06.627 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:06
2025-08-03 08:18:06.813 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:06
2025-08-03 08:18:09.893 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:218
2025-08-03 08:18:09.893 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:218,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:09.893 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:09.893 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:218
2025-08-03 08:18:09.893 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:218,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:09.893 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:218,source_light_Type:B_SourceLightType
2025-08-03 08:18:09.893 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:218,source_light_Type:A_SourceLightType
2025-08-03 08:18:09.894 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：218,B_SourceLightType
2025-08-03 08:18:09.894 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：218,A_SourceLightType
2025-08-03 08:18:10.071 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;218/238,
2025-08-03 08:18:10.080 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:10.158 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:10.349 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:10.351 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":218,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_218_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:10.493 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 219
2025-08-03 08:18:10.493 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 219
2025-08-03 08:18:10.493 [Thd =23]  Info Default  开始扫描条带； [219/238]
2025-08-03 08:18:10.502 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:18:10.505 [Thd =212]  Info Default ***row:219, vectorBeginX:-67.427, vectorBeginY:-41.407, captureBeginX:-65.808, captureBeginY:-41.407, captureEndX:64.768, captureEndY:-41.407, vectorEndX:66.671, vectorEndY:-41.407
2025-08-03 08:18:10.505 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:10.507 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8080554970893,EndPoint:-64.768448421929
2025-08-03 08:18:10.815 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:10.818 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":218,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_218_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:11.845 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:11
2025-08-03 08:18:12.098 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:12
2025-08-03 08:18:15.039 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:219
2025-08-03 08:18:15.039 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:219,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:15.039 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:15.041 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:219
2025-08-03 08:18:15.042 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:219,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:15.042 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:219,source_light_Type:B_SourceLightType
2025-08-03 08:18:15.042 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:219,source_light_Type:A_SourceLightType
2025-08-03 08:18:15.042 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：219,B_SourceLightType
2025-08-03 08:18:15.042 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：219,A_SourceLightType
2025-08-03 08:18:15.214 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;219/238,
2025-08-03 08:18:15.223 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:15.373 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:15.500 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:15.502 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":219,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_219_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:15.712 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 220
2025-08-03 08:18:15.712 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 220
2025-08-03 08:18:15.712 [Thd =249]  Info Default  开始扫描条带； [220/238]
2025-08-03 08:18:15.723 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:18:15.726 [Thd =212]  Info Default CaptureBeginX: 65.10589, CaptureBeginY:-41.83508, CaptureEndX:-65.47062, CaptureEndY:-41.83508, VectorBeginX:66.67078, VectorBeginY:-41.83508, VectorEndX:-67.42710, VectorEndY:-41.83508, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:18:15.726 [Thd =212]  Info Default ***row:220, vectorBeginX:66.671, vectorBeginY:-41.835, captureBeginX:65.106, captureBeginY:-41.835, captureEndX:-65.471, captureEndY:-41.835, vectorEndX:-67.427, vectorEndY:-41.835
2025-08-03 08:18:15.726 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:15.728 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1058887832357,EndPoint:65.4706151357826
2025-08-03 08:18:15.972 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:15.974 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":219,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_219_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:16.120 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:16
2025-08-03 08:18:16.287 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:16
2025-08-03 08:18:20.256 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:220
2025-08-03 08:18:20.256 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:220
2025-08-03 08:18:20.256 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:220,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:20.257 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:20.257 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:220,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:20.257 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:220,source_light_Type:B_SourceLightType
2025-08-03 08:18:20.257 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:220,source_light_Type:A_SourceLightType
2025-08-03 08:18:20.257 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：220,B_SourceLightType
2025-08-03 08:18:20.257 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：220,A_SourceLightType
2025-08-03 08:18:20.427 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;220/238,
2025-08-03 08:18:20.437 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:20.687 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:20.714 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:20.716 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":220,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_220_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:21.033 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 221
2025-08-03 08:18:21.033 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 221
2025-08-03 08:18:21.033 [Thd =174]  Info Default  开始扫描条带； [221/238]
2025-08-03 08:18:21.042 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:18:21.045 [Thd =212]  Info Default ***row:221, vectorBeginX:-67.427, vectorBeginY:-42.263, captureBeginX:-65.808, captureBeginY:-42.263, captureEndX:64.768, captureEndY:-42.263, vectorEndX:66.671, vectorEndY:-42.263
2025-08-03 08:18:21.045 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:21.047 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8080201720043,EndPoint:-64.768483747014
2025-08-03 08:18:21.206 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:21.208 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":220,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_220_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:21.806 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:21
2025-08-03 08:18:21.979 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:21
2025-08-03 08:18:25.577 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:221
2025-08-03 08:18:25.578 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:221,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:25.578 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:25.580 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:221
2025-08-03 08:18:25.580 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:221,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:25.580 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:221,source_light_Type:B_SourceLightType
2025-08-03 08:18:25.580 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:221,source_light_Type:A_SourceLightType
2025-08-03 08:18:25.580 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：221,B_SourceLightType
2025-08-03 08:18:25.580 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：221,A_SourceLightType
2025-08-03 08:18:25.757 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;221/238,
2025-08-03 08:18:25.766 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:25.801 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:26.037 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:26.039 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":221,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_221_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:26.146 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 222
2025-08-03 08:18:26.146 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 222
2025-08-03 08:18:26.146 [Thd =187]  Info Default  开始扫描条带； [222/238]
2025-08-03 08:18:26.163 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:18:26.165 [Thd =212]  Info Default CaptureBeginX: 65.10592, CaptureBeginY:-42.69170, CaptureEndX:-65.47058, CaptureEndY:-42.69170, VectorBeginX:66.67081, VectorBeginY:-42.69170, VectorEndX:-67.42707, VectorEndY:-42.69170, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:18:26.166 [Thd =212]  Info Default ***row:222, vectorBeginX:66.671, vectorBeginY:-42.692, captureBeginX:65.106, captureBeginY:-42.692, captureEndX:-65.471, captureEndY:-42.692, vectorEndX:-67.427, vectorEndY:-42.692
2025-08-03 08:18:26.166 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:26.167 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1059241083207,EndPoint:65.4705798106976
2025-08-03 08:18:26.508 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:26
2025-08-03 08:18:26.515 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:26.518 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":221,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_221_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:26.612 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:26
2025-08-03 08:18:30.706 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:222
2025-08-03 08:18:30.706 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:222,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:30.706 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:30.708 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:222
2025-08-03 08:18:30.708 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:222,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:30.708 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:222,source_light_Type:B_SourceLightType
2025-08-03 08:18:30.708 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:222,source_light_Type:A_SourceLightType
2025-08-03 08:18:30.709 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：222,B_SourceLightType
2025-08-03 08:18:30.709 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：222,A_SourceLightType
2025-08-03 08:18:30.880 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;222/238,
2025-08-03 08:18:30.889 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:30.985 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:31.164 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:31.166 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":222,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_222_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:31.329 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 223
2025-08-03 08:18:31.329 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 223
2025-08-03 08:18:31.329 [Thd =206]  Info Default  开始扫描条带； [223/238]
2025-08-03 08:18:31.346 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:18:31.349 [Thd =212]  Info Default ***row:223, vectorBeginX:-67.427, vectorBeginY:-43.120, captureBeginX:-65.808, captureBeginY:-43.120, captureEndX:64.769, captureEndY:-43.120, vectorEndX:66.671, vectorEndY:-43.120
2025-08-03 08:18:31.349 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:31.351 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8079848469192,EndPoint:-64.7685190720991
2025-08-03 08:18:31.630 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:31.632 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":222,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_222_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:32.632 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:32
2025-08-03 08:18:32.838 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:32
2025-08-03 08:18:35.897 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:223
2025-08-03 08:18:35.897 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:223,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:35.897 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:35.897 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:223
2025-08-03 08:18:35.897 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:223,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:35.897 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:223,source_light_Type:B_SourceLightType
2025-08-03 08:18:35.897 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:223,source_light_Type:A_SourceLightType
2025-08-03 08:18:35.897 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：223,B_SourceLightType
2025-08-03 08:18:35.898 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：223,A_SourceLightType
2025-08-03 08:18:36.063 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;223/238,
2025-08-03 08:18:36.072 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:36.167 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:36.353 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:36.355 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":223,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_223_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:36.515 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 224
2025-08-03 08:18:36.515 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 224
2025-08-03 08:18:36.515 [Thd =191]  Info Default  开始扫描条带； [224/238]
2025-08-03 08:18:36.524 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:18:36.527 [Thd =212]  Info Default CaptureBeginX: 65.10596, CaptureBeginY:-43.54833, CaptureEndX:-65.47054, CaptureEndY:-43.54833, VectorBeginX:66.67085, VectorBeginY:-43.54833, VectorEndX:-67.42703, VectorEndY:-43.54833, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:18:36.527 [Thd =212]  Info Default ***row:224, vectorBeginX:66.671, vectorBeginY:-43.548, captureBeginX:65.106, captureBeginY:-43.548, captureEndX:-65.471, captureEndY:-43.548, vectorEndX:-67.427, vectorEndY:-43.548
2025-08-03 08:18:36.527 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:36.529 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1059594334057,EndPoint:65.4705444856126
2025-08-03 08:18:36.829 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:36.831 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":223,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_223_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:37.354 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:37
2025-08-03 08:18:37.366 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:37
2025-08-03 08:18:41.057 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:224
2025-08-03 08:18:41.058 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:224
2025-08-03 08:18:41.058 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:224,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:41.058 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:41.058 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:224,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:41.058 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:224,source_light_Type:B_SourceLightType
2025-08-03 08:18:41.058 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:224,source_light_Type:A_SourceLightType
2025-08-03 08:18:41.058 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：224,B_SourceLightType
2025-08-03 08:18:41.058 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：224,A_SourceLightType
2025-08-03 08:18:41.237 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;224/238,
2025-08-03 08:18:41.246 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:41.341 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:41.518 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:41.521 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":224,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_224_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:41.687 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 225
2025-08-03 08:18:41.687 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 225
2025-08-03 08:18:41.687 [Thd =23]  Info Default  开始扫描条带； [225/238]
2025-08-03 08:18:41.696 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:18:41.698 [Thd =212]  Info Default ***row:225, vectorBeginX:-67.427, vectorBeginY:-43.977, captureBeginX:-65.808, captureBeginY:-43.977, captureEndX:64.769, captureEndY:-43.977, vectorEndX:66.671, vectorEndY:-43.977
2025-08-03 08:18:41.698 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:41.701 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8079495218342,EndPoint:-64.7685543971841
2025-08-03 08:18:41.984 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:41.986 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":224,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_224_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:42.896 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:42
2025-08-03 08:18:42.925 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:42
2025-08-03 08:18:46.242 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:225
2025-08-03 08:18:46.243 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:225
2025-08-03 08:18:46.243 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:225,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:46.243 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:46.243 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:225,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:46.243 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:225,source_light_Type:B_SourceLightType
2025-08-03 08:18:46.243 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:225,source_light_Type:A_SourceLightType
2025-08-03 08:18:46.243 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：225,B_SourceLightType
2025-08-03 08:18:46.243 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：225,A_SourceLightType
2025-08-03 08:18:46.400 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;225/238,
2025-08-03 08:18:46.409 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:46.521 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:46.702 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:46.704 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":225,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_225_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:46.868 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 226
2025-08-03 08:18:46.868 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 226
2025-08-03 08:18:46.868 [Thd =192]  Info Default  开始扫描条带； [226/238]
2025-08-03 08:18:46.877 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:18:46.880 [Thd =212]  Info Default CaptureBeginX: 65.10599, CaptureBeginY:-44.40495, CaptureEndX:-65.47051, CaptureEndY:-44.40495, VectorBeginX:66.67088, VectorBeginY:-44.40495, VectorEndX:-67.42700, VectorEndY:-44.40495, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:18:46.880 [Thd =212]  Info Default ***row:226, vectorBeginX:66.671, vectorBeginY:-44.405, captureBeginX:65.106, captureBeginY:-44.405, captureEndX:-65.471, captureEndY:-44.405, vectorEndX:-67.427, vectorEndY:-44.405
2025-08-03 08:18:46.880 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:46.882 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1059947584908,EndPoint:65.4705091605275
2025-08-03 08:18:47.164 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:47.167 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":225,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_225_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:48.442 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:48
2025-08-03 08:18:48.738 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:48
2025-08-03 08:18:51.410 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:226
2025-08-03 08:18:51.410 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:226,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:51.410 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:51.411 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:226
2025-08-03 08:18:51.411 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:226,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:51.411 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:226,source_light_Type:A_SourceLightType
2025-08-03 08:18:51.411 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:226,source_light_Type:B_SourceLightType
2025-08-03 08:18:51.411 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：226,A_SourceLightType
2025-08-03 08:18:51.411 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：226,B_SourceLightType
2025-08-03 08:18:51.586 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;226/238,
2025-08-03 08:18:51.596 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:51.632 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:51.864 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:51.866 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":226,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_226_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:51.969 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 227
2025-08-03 08:18:51.969 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 227
2025-08-03 08:18:51.969 [Thd =205]  Info Default  开始扫描条带； [227/238]
2025-08-03 08:18:51.978 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:18:51.981 [Thd =212]  Info Default ***row:227, vectorBeginX:-67.427, vectorBeginY:-44.833, captureBeginX:-65.808, captureBeginY:-44.833, captureEndX:64.769, captureEndY:-44.833, vectorEndX:66.671, vectorEndY:-44.833
2025-08-03 08:18:51.981 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:51.984 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8079141967492,EndPoint:-64.7685897222692
2025-08-03 08:18:52.348 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:52.351 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":226,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_226_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:53.755 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:53
2025-08-03 08:18:53.775 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:53
2025-08-03 08:18:56.519 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:227
2025-08-03 08:18:56.519 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:227,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:56.519 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:18:56.520 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:227
2025-08-03 08:18:56.521 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:227,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:18:56.531 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:227,source_light_Type:B_SourceLightType
2025-08-03 08:18:56.531 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:227,source_light_Type:A_SourceLightType
2025-08-03 08:18:56.531 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：227,B_SourceLightType
2025-08-03 08:18:56.531 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：227,A_SourceLightType
2025-08-03 08:18:56.693 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;227/238,
2025-08-03 08:18:56.702 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:18:56.974 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:18:56.977 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":227,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_227_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:57.048 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:18:57.393 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 228
2025-08-03 08:18:57.393 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 228
2025-08-03 08:18:57.393 [Thd =191]  Info Default  开始扫描条带； [228/238]
2025-08-03 08:18:57.402 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:18:57.405 [Thd =212]  Info Default CaptureBeginX: 65.10603, CaptureBeginY:-45.26158, CaptureEndX:-65.47047, CaptureEndY:-45.26158, VectorBeginX:66.67092, VectorBeginY:-45.26158, VectorEndX:-67.42696, VectorEndY:-45.26158, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:18:57.405 [Thd =212]  Info Default ***row:228, vectorBeginX:66.671, vectorBeginY:-45.262, captureBeginX:65.106, captureBeginY:-45.262, captureEndX:-65.470, captureEndY:-45.262, vectorEndX:-67.427, vectorEndY:-45.262
2025-08-03 08:18:57.405 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:18:57.406 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1060300835758,EndPoint:65.4704738354425
2025-08-03 08:18:57.432 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:18:57.434 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":227,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_227_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:18:57.793 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:18:57
2025-08-03 08:18:57.813 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:18:57
2025-08-03 08:19:01.937 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:228
2025-08-03 08:19:01.937 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:228
2025-08-03 08:19:01.937 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:228,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:01.937 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:01.937 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:228,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:01.937 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:228,source_light_Type:B_SourceLightType
2025-08-03 08:19:01.937 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:228,source_light_Type:A_SourceLightType
2025-08-03 08:19:01.938 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：228,B_SourceLightType
2025-08-03 08:19:01.938 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：228,A_SourceLightType
2025-08-03 08:19:02.116 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;228/238,
2025-08-03 08:19:02.126 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:02.262 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:02.405 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:02.408 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":228,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_228_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:02.609 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 229
2025-08-03 08:19:02.609 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 229
2025-08-03 08:19:02.609 [Thd =203]  Info Default  开始扫描条带； [229/238]
2025-08-03 08:19:02.618 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:19:02.621 [Thd =212]  Info Default ***row:229, vectorBeginX:-67.427, vectorBeginY:-45.690, captureBeginX:-65.808, captureBeginY:-45.690, captureEndX:64.769, captureEndY:-45.690, vectorEndX:66.671, vectorEndY:-45.690
2025-08-03 08:19:02.621 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:02.623 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8078788716641,EndPoint:-64.7686250473542
2025-08-03 08:19:02.868 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:02.870 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":228,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_228_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:03.489 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:03
2025-08-03 08:19:03.936 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:03
2025-08-03 08:19:07.154 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:229
2025-08-03 08:19:07.155 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:229,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:07.155 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:07.155 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:229
2025-08-03 08:19:07.156 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:229,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:07.156 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:229,source_light_Type:A_SourceLightType
2025-08-03 08:19:07.156 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:229,source_light_Type:B_SourceLightType
2025-08-03 08:19:07.156 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：229,A_SourceLightType
2025-08-03 08:19:07.156 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：229,B_SourceLightType
2025-08-03 08:19:07.324 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;229/238,
2025-08-03 08:19:07.333 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:07.621 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:07.624 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":229,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_229_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:07.692 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:08.026 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 230
2025-08-03 08:19:08.026 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 230
2025-08-03 08:19:08.026 [Thd =23]  Info Default  开始扫描条带； [230/238]
2025-08-03 08:19:08.035 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:19:08.038 [Thd =212]  Info Default CaptureBeginX: 65.10607, CaptureBeginY:-46.11820, CaptureEndX:-65.47044, CaptureEndY:-46.11820, VectorBeginX:66.67096, VectorBeginY:-46.11820, VectorEndX:-67.42693, VectorEndY:-46.11820, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:19:08.038 [Thd =212]  Info Default ***row:230, vectorBeginX:66.671, vectorBeginY:-46.118, captureBeginX:65.106, captureBeginY:-46.118, captureEndX:-65.470, captureEndY:-46.118, vectorEndX:-67.427, vectorEndY:-46.118
2025-08-03 08:19:08.038 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:08.039 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1060654086609,EndPoint:65.4704385103575
2025-08-03 08:19:08.089 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:08.091 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":229,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_229_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:08.469 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:08
2025-08-03 08:19:08.490 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:08
2025-08-03 08:19:12.568 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:230
2025-08-03 08:19:12.568 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:230,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:12.568 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:12.568 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:230
2025-08-03 08:19:12.568 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:230,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:12.568 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:230,source_light_Type:B_SourceLightType
2025-08-03 08:19:12.569 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:230,source_light_Type:A_SourceLightType
2025-08-03 08:19:12.569 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：230,B_SourceLightType
2025-08-03 08:19:12.569 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：230,A_SourceLightType
2025-08-03 08:19:12.744 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;230/238,
2025-08-03 08:19:12.753 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:12.888 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:13.004 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:13
2025-08-03 08:19:13.015 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:13
2025-08-03 08:19:13.028 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:13.030 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":230,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_230_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:13.234 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 231
2025-08-03 08:19:13.235 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 231
2025-08-03 08:19:13.235 [Thd =191]  Info Default  开始扫描条带； [231/238]
2025-08-03 08:19:13.244 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:19:13.247 [Thd =212]  Info Default ***row:231, vectorBeginX:-67.427, vectorBeginY:-46.547, captureBeginX:-65.808, captureBeginY:-46.547, captureEndX:64.769, captureEndY:-46.547, vectorEndX:66.671, vectorEndY:-46.547
2025-08-03 08:19:13.247 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:13.248 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.8078435465791,EndPoint:-64.7686603724392
2025-08-03 08:19:13.497 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:13.499 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":230,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_230_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:17.778 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:231
2025-08-03 08:19:17.778 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:231,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:17.778 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:17.778 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:231
2025-08-03 08:19:17.779 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:231,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:17.779 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:231,source_light_Type:A_SourceLightType
2025-08-03 08:19:17.779 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:231,source_light_Type:B_SourceLightType
2025-08-03 08:19:17.779 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：231,A_SourceLightType
2025-08-03 08:19:17.779 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：231,B_SourceLightType
2025-08-03 08:19:17.954 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;231/238,
2025-08-03 08:19:17.964 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:18.104 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:18.237 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:18.239 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":231,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_231_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:18.447 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 232
2025-08-03 08:19:18.447 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 232
2025-08-03 08:19:18.447 [Thd =249]  Info Default  开始扫描条带； [232/238]
2025-08-03 08:19:18.457 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:19:18.459 [Thd =212]  Info Default CaptureBeginX: 65.10610, CaptureBeginY:-46.97483, CaptureEndX:-65.47040, CaptureEndY:-46.97483, VectorBeginX:66.67099, VectorBeginY:-46.97483, VectorEndX:-67.42689, VectorEndY:-46.97483, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:19:18.460 [Thd =212]  Info Default ***row:232, vectorBeginX:66.671, vectorBeginY:-46.975, captureBeginX:65.106, captureBeginY:-46.975, captureEndX:-65.470, captureEndY:-46.975, vectorEndX:-67.427, vectorEndY:-46.975
2025-08-03 08:19:18.460 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:18.462 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1061007337459,EndPoint:65.4704031852724
2025-08-03 08:19:18.535 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:18
2025-08-03 08:19:18.721 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:18.724 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":231,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_231_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:18.734 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:18
2025-08-03 08:19:22.991 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:232
2025-08-03 08:19:22.991 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:232,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:22.991 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:23.002 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:232
2025-08-03 08:19:23.002 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:232,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:23.002 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:232,source_light_Type:B_SourceLightType
2025-08-03 08:19:23.002 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:232,source_light_Type:A_SourceLightType
2025-08-03 08:19:23.003 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：232,B_SourceLightType
2025-08-03 08:19:23.003 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：232,A_SourceLightType
2025-08-03 08:19:23.167 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;232/238,
2025-08-03 08:19:23.176 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:23.360 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:23.452 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:23.464 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":232,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_232_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:23.694 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 233
2025-08-03 08:19:23.694 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 233
2025-08-03 08:19:23.694 [Thd =174]  Info Default  开始扫描条带； [233/238]
2025-08-03 08:19:23.703 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:19:23.706 [Thd =212]  Info Default ***row:233, vectorBeginX:-67.427, vectorBeginY:-47.403, captureBeginX:-65.808, captureBeginY:-47.403, captureEndX:64.769, captureEndY:-47.403, vectorEndX:66.671, vectorEndY:-47.403
2025-08-03 08:19:23.706 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:23.708 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.807808221494,EndPoint:-64.7686956975243
2025-08-03 08:19:23.917 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:23.919 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":232,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_232_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:24.760 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:24
2025-08-03 08:19:24.888 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:24
2025-08-03 08:19:28.243 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:233
2025-08-03 08:19:28.243 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:233,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:28.243 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:28.249 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:233
2025-08-03 08:19:28.249 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:233,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:28.249 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:233,source_light_Type:B_SourceLightType
2025-08-03 08:19:28.249 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:233,source_light_Type:A_SourceLightType
2025-08-03 08:19:28.249 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：233,B_SourceLightType
2025-08-03 08:19:28.249 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：233,A_SourceLightType
2025-08-03 08:19:28.409 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;233/238,
2025-08-03 08:19:28.418 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:28.533 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:28.713 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:28.715 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":233,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_233_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:28.876 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 234
2025-08-03 08:19:28.876 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 234
2025-08-03 08:19:28.876 [Thd =203]  Info Default  开始扫描条带； [234/238]
2025-08-03 08:19:28.894 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:19:28.905 [Thd =212]  Info Default CaptureBeginX: 65.10614, CaptureBeginY:-47.83146, CaptureEndX:-65.47037, CaptureEndY:-47.83146, VectorBeginX:66.67103, VectorBeginY:-47.83146, VectorEndX:-67.42686, VectorEndY:-47.83146, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:19:28.906 [Thd =212]  Info Default ***row:234, vectorBeginX:66.671, vectorBeginY:-47.831, captureBeginX:65.106, captureBeginY:-47.831, captureEndX:-65.470, captureEndY:-47.831, vectorEndX:-67.427, vectorEndY:-47.831
2025-08-03 08:19:28.906 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:28.907 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.1061360588309,EndPoint:65.4703678601874
2025-08-03 08:19:29.182 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:29.184 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":233,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_233_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:29.911 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:29
2025-08-03 08:19:29.943 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:29
2025-08-03 08:19:33.435 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:234
2025-08-03 08:19:33.435 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:234,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:33.435 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:33.438 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:234
2025-08-03 08:19:33.438 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:234,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:33.438 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:234,source_light_Type:B_SourceLightType
2025-08-03 08:19:33.438 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:234,source_light_Type:A_SourceLightType
2025-08-03 08:19:33.438 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：234,B_SourceLightType
2025-08-03 08:19:33.438 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：234,A_SourceLightType
2025-08-03 08:19:33.610 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;234/238,
2025-08-03 08:19:33.627 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:33.666 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:33.896 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:33.899 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":234,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_234_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:34.013 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 235
2025-08-03 08:19:34.013 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 235
2025-08-03 08:19:34.013 [Thd =206]  Info Default  开始扫描条带； [235/238]
2025-08-03 08:19:34.022 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:19:34.024 [Thd =212]  Info Default ***row:235, vectorBeginX:-67.427, vectorBeginY:-48.260, captureBeginX:-65.808, captureBeginY:-48.260, captureEndX:64.769, captureEndY:-48.260, vectorEndX:66.671, vectorEndY:-48.260
2025-08-03 08:19:34.024 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:34.027 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.807772896409,EndPoint:-64.7687310226093
2025-08-03 08:19:34.364 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:34.366 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":234,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_234_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:35.468 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:35
2025-08-03 08:19:35.533 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:35
2025-08-03 08:19:38.557 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:235
2025-08-03 08:19:38.557 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:235,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:38.557 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:38.558 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:235
2025-08-03 08:19:38.558 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:235,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:38.558 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:235,source_light_Type:A_SourceLightType
2025-08-03 08:19:38.558 [Thd =30]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:235,source_light_Type:B_SourceLightType
2025-08-03 08:19:38.558 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：235,A_SourceLightType
2025-08-03 08:19:38.558 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：235,B_SourceLightType
2025-08-03 08:19:38.735 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;235/238,
2025-08-03 08:19:38.745 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:38.952 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:39.029 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:39.035 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":235,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_235_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:39.298 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 236
2025-08-03 08:19:39.298 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 236
2025-08-03 08:19:39.298 [Thd =202]  Info Default  开始扫描条带； [236/238]
2025-08-03 08:19:39.307 [Thd =212]  Info Default ScanDirection is Positive
2025-08-03 08:19:39.310 [Thd =212]  Info Default CaptureBeginX: 65.10617, CaptureBeginY:-48.68808, CaptureEndX:-65.47033, CaptureEndY:-48.68808, VectorBeginX:66.67106, VectorBeginY:-48.68808, VectorEndX:-67.42682, VectorEndY:-48.68808, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 08:19:39.310 [Thd =212]  Info Default ***row:236, vectorBeginX:66.671, vectorBeginY:-48.688, captureBeginX:65.106, captureBeginY:-48.688, captureEndX:-65.470, captureEndY:-48.688, vectorEndX:-67.427, vectorEndY:-48.688
2025-08-03 08:19:39.310 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:39.311 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-65.106171383916,EndPoint:65.4703325351023
2025-08-03 08:19:39.502 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:39.504 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":235,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_235_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:40.050 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:40
2025-08-03 08:19:40.062 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:40
2025-08-03 08:19:43.841 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:236
2025-08-03 08:19:43.842 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:236
2025-08-03 08:19:43.842 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:236,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:43.842 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:43.842 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:236,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:43.842 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:236,source_light_Type:B_SourceLightType
2025-08-03 08:19:43.842 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:236,source_light_Type:A_SourceLightType
2025-08-03 08:19:43.842 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：236,B_SourceLightType
2025-08-03 08:19:43.842 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：236,A_SourceLightType
2025-08-03 08:19:44.011 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;236/238,
2025-08-03 08:19:44.020 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:44.239 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:44.304 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:44.307 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":236,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_236_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:44.575 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 237
2025-08-03 08:19:44.575 [Thd =212]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 237
2025-08-03 08:19:44.575 [Thd =185]  Info Default  开始扫描条带； [237/238]
2025-08-03 08:19:44.584 [Thd =212]  Info Default ScanDirection is Negative
2025-08-03 08:19:44.587 [Thd =212]  Info Default ***row:237, vectorBeginX:-67.427, vectorBeginY:-49.116, captureBeginX:-65.808, captureBeginY:-49.116, captureEndX:64.769, captureEndY:-49.116, vectorEndX:66.671, vectorEndY:-49.116
2025-08-03 08:19:44.587 [Thd =212]  Info Default m_focusMapMode：0
2025-08-03 08:19:44.589 [Thd =212]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:65.807737571324,EndPoint:-64.7687663476943
2025-08-03 08:19:44.779 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:44.782 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":236,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_236_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:45.582 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:45
2025-08-03 08:19:45.651 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:45
2025-08-03 08:19:49.121 [Thd =30]  Info Default Stripes are collected for data processing！strip_no:237
2025-08-03 08:19:49.121 [Thd =30]  Info Default Singleton.addTask ,m_strip_idx:237,source_light_Type:B_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:49.121 [Thd =30]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 08:19:49.134 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:237
2025-08-03 08:19:49.134 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:237,source_light_Type:A_SourceLightType,lockTaskObj:5500712
2025-08-03 08:19:49.135 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:237,source_light_Type:B_SourceLightType
2025-08-03 08:19:49.135 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：237,B_SourceLightType
2025-08-03 08:19:49.135 [Thd =52]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：237,A_SourceLightType
2025-08-03 08:19:49.135 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:237,source_light_Type:A_SourceLightType
2025-08-03 08:19:49.294 [Thd =212]  Info Default Strip scanning complete, waiting for collection... ;237/238,
2025-08-03 08:19:49.303 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 08:19:49.587 [Thd =65]  Info Default --source_light_Type:1,count:1
2025-08-03 08:19:49.590 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":237,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_237_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:50.048 [Thd =65]  Info Default --source_light_Type:0,count:1
2025-08-03 08:19:50.050 [Thd =65]  Info Default Sending data to the MCU,stripInfo:{"strip_no":237,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":299,"count_pack":1231,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_237_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 08:19:50.171 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:19:50
2025-08-03 08:19:50.615 [Thd =212]  Info Default singleAixsScan Testing 2
2025-08-03 08:19:50.701 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:19:50
2025-08-03 08:19:50.958 [Thd =212]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 238
2025-08-03 08:19:50.958 [Thd =212]  Info Default begin--m_TaskFinish_event----------
2025-08-03 08:19:50.958 [Thd =191]  Info Default 扫描完成,等待结果处理...
2025-08-03 08:19:51.958 [Thd =212]  Info Default end--m_TaskFinish_event----------
2025-08-03 08:19:59.605 [Thd =212]  Info Default ***********Task finished.**************
2025-08-03 08:19:59.606 [Thd =212]  Info Default Stop the detection thread;
2025-08-03 08:19:59.666 [Thd =207]  Warn Default 还原光源最大功率
2025-08-03 08:19:59.666 [Thd =205]  Info Default LaserLamp MaxPower:300
2025-08-03 08:20:00.639 [Thd =174]  Info MMSFocus _isStop = true 
2025-08-03 08:20:00.667 [Thd =205]  Info Default OpenLamp Transmission
2025-08-03 08:20:01.470 [Thd =217]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:20:01.670 [Thd =205]  Info Default CloseLamp Reflection
2025-08-03 08:20:02.710 [Thd =207]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:20:03.156 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:20:03
2025-08-03 08:20:03.218 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:20:03
2025-08-03 08:20:03.666 [Thd =174]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:20:03.666 [Thd =206]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:20:03.720 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:20:03
2025-08-03 08:20:03.740 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:20:03
2025-08-03 08:20:04.211 [Thd =207]  Error Default SyncSend recv cmd timeout
2025-08-03 08:20:05.668 [Thd =174]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:20:05.668 [Thd =202]  Info Default 聚焦Track已关闭
2025-08-03 08:20:08.253 [Thd =201]  Info Default RecordCompleteStripNo begin:2025-08-03 08:20:08
2025-08-03 08:20:08.265 [Thd =201]  Info Default RecordCompleteStripNo end:2025-08-03 08:20:08
2025-08-03 08:20:08.265 [Thd =206]  Info Default 等待硬件处理中...
2025-08-03 08:20:11.690 [Thd =192]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:20:11.690 [Thd =192]  Error Default InitializeService: : ChangeLightPath to Area error
2025-08-03 08:20:11.690 [Thd =212]  Info Default Finally Over！
2025-08-03 08:20:11.690 [Thd =212]  Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over!
2025-08-03 08:20:11.690 [Thd =201]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Finished
2025-08-03 08:20:11.690 [Thd =201]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Finished
2025-08-03 08:20:11.690 [Thd =174]  Info Default 硬件处理完成。
2025-08-03 08:20:11.691 [Thd =201]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 08:20:11.692 [Thd =201]  Info Default SetSystemStatus Success
2025-08-03 08:20:11.692 [Thd =187]  Info Default 结果处理全部完成！
2025-08-03 08:20:11.697 [Thd =207]  Info Default Chuck vacuum close
2025-08-03 08:20:12.698 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:20:12.698 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished! CurTaskName:2946
2025-08-03 08:20:13.514 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:20:13.770 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished End! CurTaskName:2946
2025-08-03 08:20:13.833 [Thd =201]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-08-03 08:20:13.834 [Thd =201]  Info Default *********Reset2**********
2025-08-03 08:20:13.834 [Thd =252]  Info Default 检测完成！
2025-08-03 08:20:13.834 [Thd =206]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 08:20:18.434 [Thd =174]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424877,"ServiceStartTime":"2025\/8\/3 7:58:03","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:18.435 [Thd =174]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424877,"ServiceStartTime":"2025\/8\/3 7:58:01","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:18.435 [Thd =249]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424877,"ServiceStartTime":"2025\/8\/3 7:58:02","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:18.435 [Thd =249]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424877,"ServiceStartTime":"2025\/8\/3 7:58:58","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:20.955 [Thd =192]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424882,"ServiceStartTime":"2025\/8\/3 8:20:18","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:20.956 [Thd =202]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424882,"ServiceStartTime":"2025\/8\/3 8:20:17","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:20.976 [Thd =249]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424882,"ServiceStartTime":"2025\/8\/3 8:20:17","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:20.985 [Thd =187]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":424882,"ServiceStartTime":"2025\/8\/3 8:21:13","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:20:21.357 [Thd =206]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 08:20:28.532 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:20:28.532 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:20:28.791 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:20:28.791 [Thd =1]  Info Default MaskScaleY:0.999999796822418
2025-08-03 08:20:28.791 [Thd =1]  Info Default MaskScaleX:0.999996661968144,Orth_Y_BeforR:0.141764054199409
2025-08-03 08:22:37.216 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:22:37.265 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:22:37.265 [Thd =1]  Info Default MaskScaleY:0.999999796822418
2025-08-03 08:22:37.265 [Thd =1]  Info Default MaskScaleX:0.999996661968144,Orth_Y_BeforR:0.141764054199409
2025-08-03 08:22:37.266 [Thd =252]  Info Default located_pos:(62.0411249646476, 72.6672313024301)
2025-08-03 08:22:37.266 [Thd =252]  Info Default deltax_stage 0, deltay_stage:-124.400025275296.
2025-08-03 08:22:37.266 [Thd =252]  Info Default MoveStageForMarkCol102 point (-62.3589003106487, 72.6672313024301), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:37.266 [Thd =252]  Info Default located_pos:(-62.3589003106487, 72.6672313024301)
2025-08-03 08:22:37.266 [Thd =252]  Info Default deltax_stage 141.40047199928, deltay_stage:0.
2025-08-03 08:22:37.266 [Thd =252]  Info Default MoveStageForMarkCol101 point (62.0469559654525, -68.7332408170779), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:37.266 [Thd =252]  Info Default deltax_stage 0, deltay_stage:-124.400025275296.
2025-08-03 08:22:37.266 [Thd =252]  Info Default MoveStageForMarkCol102 point (-62.3530693098438, -68.7332408170779), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0469559654525, -68.7332408170779).
2025-08-03 08:22:37.266 [Thd =252]  Info Default located_pos:(-62.3530693098438, -68.7332408170779)
2025-08-03 08:22:37.266 [Thd =252]  Info Default AliPt:(62.0411249646476, 72.6672313024301), GDS2StagePt:(62.0411249646476, 72.6672313024301), XOffset:5, YOffset:5
2025-08-03 08:22:37.266 [Thd =252]  Info Default AliPt:(-62.3589003106487, 72.6672313024333), GDS2StagePt:(-62.3589003106487, 72.6672313024301), XOffset:5, YOffset:5
2025-08-03 08:22:37.267 [Thd =252]  Info Default AliPt:(-62.3530693098487, -68.7332406968467), GDS2StagePt:(-62.3530693098438, -68.7332408170779), XOffset:5, YOffset:5
2025-08-03 08:22:37.276 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:22:37.276 [Thd =1]  Info Default MaskScaleY:0.999999796822418
2025-08-03 08:22:37.276 [Thd =1]  Info Default MaskScaleX:0.999996661968144,Orth_Y_BeforR:0.141764054199409
2025-08-03 08:22:37.276 [Thd =1]  Info Default deltax_stage 19.9013234312516, deltay_stage:0.
2025-08-03 08:22:37.276 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0419456453094, 52.7659078542571), GDS ref(5500000, 138400000), gdsObject(25401257, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:37.276 [Thd =1]  Info Default deltax_stage 0, deltay_stage:2.62514153336991.
2025-08-03 08:22:37.276 [Thd =1]  Info Default MoveStageForMarkCol102 point (64.6670871786793, 52.7659078542571), GDS ref(25401257, 138400000), gdsObject(25401257, 141025141), stageRef(62.0419456453094, 52.7659078542571).
2025-08-03 08:22:37.277 [Thd =1]  Info Default located_pos:(64.6670871786793, 52.7659078542571)
2025-08-03 08:22:37.277 [Thd =1]  Info Default deltax_stage 121.455988423958, deltay_stage:0.
2025-08-03 08:22:37.277 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0461335049746, -48.7887572247982), GDS ref(5500000, 138400000), gdsObject(126955583, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:37.277 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-126.992275801983.
2025-08-03 08:22:37.277 [Thd =1]  Info Default MoveStageForMarkCol102 point (-64.9461422970089, -48.7887572247982), GDS ref(126955583, 138400000), gdsObject(126955583, 11407750), stageRef(62.0461335049746, -48.7887572247982).
2025-08-03 08:22:37.277 [Thd =1]  Info Default located_pos:(-64.9461422970089, -48.7887572247982)
2025-08-03 08:22:39.763 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:22:48.342 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:22:48.355 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:22:48.356 [Thd =1]  Info Default MaskScaleY:0.999999796822418
2025-08-03 08:22:48.356 [Thd =1]  Info Default MaskScaleX:0.999996661968144,Orth_Y_BeforR:0.141764054199409
2025-08-03 08:22:48.356 [Thd =205]  Info Default located_pos:(62.0411249646476, 72.6672313024301)
2025-08-03 08:22:48.356 [Thd =205]  Info Default deltax_stage 0, deltay_stage:-124.400025275296.
2025-08-03 08:22:48.356 [Thd =205]  Info Default MoveStageForMarkCol102 point (-62.3589003106487, 72.6672313024301), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:48.356 [Thd =205]  Info Default located_pos:(-62.3589003106487, 72.6672313024301)
2025-08-03 08:22:48.357 [Thd =205]  Info Default deltax_stage 141.40047199928, deltay_stage:0.
2025-08-03 08:22:48.357 [Thd =205]  Info Default MoveStageForMarkCol101 point (62.0469559654525, -68.7332408170779), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:48.357 [Thd =205]  Info Default deltax_stage 0, deltay_stage:-124.400025275296.
2025-08-03 08:22:48.357 [Thd =205]  Info Default MoveStageForMarkCol102 point (-62.3530693098438, -68.7332408170779), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0469559654525, -68.7332408170779).
2025-08-03 08:22:48.357 [Thd =205]  Info Default located_pos:(-62.3530693098438, -68.7332408170779)
2025-08-03 08:22:48.357 [Thd =205]  Info Default AliPt:(62.0411249646476, 72.6672313024301), GDS2StagePt:(62.0411249646476, 72.6672313024301), XOffset:5, YOffset:5
2025-08-03 08:22:48.357 [Thd =205]  Info Default AliPt:(-62.3589003106487, 72.6672313024333), GDS2StagePt:(-62.3589003106487, 72.6672313024301), XOffset:5, YOffset:5
2025-08-03 08:22:48.357 [Thd =205]  Info Default AliPt:(-62.3530693098487, -68.7332406968467), GDS2StagePt:(-62.3530693098438, -68.7332408170779), XOffset:5, YOffset:5
2025-08-03 08:22:48.369 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:22:48.369 [Thd =1]  Info Default MaskScaleY:0.999999796822418
2025-08-03 08:22:48.369 [Thd =1]  Info Default MaskScaleX:0.999996661968144,Orth_Y_BeforR:0.141764054199409
2025-08-03 08:22:48.370 [Thd =1]  Info Default deltax_stage 14.9114237748076, deltay_stage:0.
2025-08-03 08:22:48.370 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0417398743632, 57.7558075149438), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:48.370 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59981554411214.
2025-08-03 08:22:48.370 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6415554184754, 57.7558075149438), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0417398743632, 57.7558075149438).
2025-08-03 08:22:48.370 [Thd =1]  Info Default located_pos:(69.6415554184754, 57.7558075149438)
2025-08-03 08:22:48.371 [Thd =1]  Info Default deltax_stage 126.458495122485, deltay_stage:0.
2025-08-03 08:22:48.371 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0463397958036, -53.7912639275784), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:22:48.371 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.98640981668.
2025-08-03 08:22:48.371 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.940070020876, -53.7912639275784), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.0463397958036, -53.7912639275784).
2025-08-03 08:22:48.371 [Thd =1]  Info Default located_pos:(-69.940070020876, -53.7912639275784)
2025-08-03 08:23:09.196 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:24:39.426 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:27736.59MB VirtualMemorySize:200.4 GB
2025-08-03 08:24:39.551 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:24:39.551 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:24:39.606 [Thd =174]  Info Default 设置光标定环境中，请等待......
2025-08-03 08:24:39.606 [Thd =202]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 08:24:39.607 [Thd =202]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:24:39.607 [Thd =202]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:24:39.611 [Thd =202]  Info Default SetDistortionPara disaabled
2025-08-03 08:24:40.351 [Thd =202]  Info MMSFocus _isStop = true 
2025-08-03 08:24:40.351 [Thd =202]  Info Default aSwitchIndex index:0
2025-08-03 08:24:40.351 [Thd =202]  Info Default lens from ATF:
2025-08-03 08:24:40.351 [Thd =202]  Info Default objCount:3
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:P200;objId:0
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:P140;objId:1
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:P100;objId:2
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:;objId:0
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:;objId:0
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:;objId:0
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:;objId:0
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:;objId:0
2025-08-03 08:24:40.352 [Thd =202]  Info Default lens from system settings:
2025-08-03 08:24:40.352 [Thd =202]  Info Default systemlensettings lens count:3
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:P200;objId:0
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:P140;objId:1
2025-08-03 08:24:40.352 [Thd =202]  Info Default ratio:P100;objId:2
2025-08-03 08:24:40.355 [Thd =202]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:24:40.388 [Thd =202]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:24:40.391 [Thd =202]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:24:40.392 [Thd =202]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:24:40.392 [Thd =202]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:24:40.392 [Thd =202]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:24:40.392 [Thd =202]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:24:40.392 [Thd =202]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:24:40.392 [Thd =202]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:24:40.392 [Thd =202]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109976404593,StepStep:0.431712033068519,CosValueY:1,SinValueY:0
2025-08-03 08:24:40.652 [Thd =202]  Info strip vectorBegin:(6.438288,7.534189),VectorEnd:(1.132958,7.534189),CaptureBegin:(4.438288,7.534189)，CaptureEnd：(3.132958,7.534189),StepScan:0.435109976404593
2025-08-03 08:24:40.652 [Thd =202]  Info Default VectorBegin:(6.43828827572257,7.53418872057944)
2025-08-03 08:24:41.880 [Thd =206]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:24:41.880 [Thd =202]  Info Default SetMaxPower:300
2025-08-03 08:24:42.882 [Thd =206]  Info Default 打开光源，亮度：42%
2025-08-03 08:24:42.882 [Thd =233]  Info Default OpenLamp Transmission
2025-08-03 08:24:42.899 [Thd =185]  Info Default LaserLamp MaxPower:300,currentPower:126
2025-08-03 08:24:43.688 [Thd =245]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:24:44.409 [Thd =185]  Error Default SyncSend recv cmd timeout
2025-08-03 08:24:44.882 [Thd =202]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:24:44.882 [Thd =187]  Info Default 聚焦Track已关闭
2025-08-03 08:24:46.360 [Thd =202]  Info MMSFocus _isStop = true 
2025-08-03 08:24:46.510 [Thd =233]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:24:46.510 [Thd =233]  Info Default OpenLamp Reflection
2025-08-03 08:24:47.865 [Thd =202]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:24:47.865 [Thd =206]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:24:48.316 [Thd =233]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:24:50.867 [Thd =202]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:24:50.867 [Thd =233]  Info Default 聚焦Track已开启
2025-08-03 08:24:54.897 [Thd =205]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:24:54.897 [Thd =205]  Info Default ChangeLightPath: False!
2025-08-03 08:24:54.897 [Thd =205]  Info Default 标定中，请等待......
2025-08-03 08:24:54.897 [Thd =245]  Info Default CurrentSize:2048,2048
2025-08-03 08:24:54.897 [Thd =245]  Info Default Camera size no change
2025-08-03 08:24:54.897 [Thd =185]  Info Default CurrentSize:2048,2048
2025-08-03 08:24:54.897 [Thd =185]  Info Default Camera size no change
2025-08-03 08:24:54.899 [Thd =245]  Info Default Set camera size success
2025-08-03 08:24:54.899 [Thd =245]  Info Default Current:TDIStage：TDI248，Target：TDI256
2025-08-03 08:24:54.899 [Thd =185]  Info Default Set camera size success
2025-08-03 08:24:54.899 [Thd =185]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:24:56.352 [Thd =185]  Info Default Set camera parameter
2025-08-03 08:24:56.352 [Thd =185]  Info Default TriggerMode is On,dont set
2025-08-03 08:24:56.352 [Thd =185]  Info Default BUFFER_COUNT no change
2025-08-03 08:24:56.855 [Thd =245]  Info Default Set camera parameter
2025-08-03 08:24:56.855 [Thd =245]  Info Default TriggerMode is On,dont set
2025-08-03 08:24:56.855 [Thd =245]  Info Default BUFFER_COUNT no change
2025-08-03 08:24:56.861 [Thd =202]  Info Default scanStrips:1,LampResult:42
2025-08-03 08:24:56.861 [Thd =202]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 08:24:56.861 [Thd =202]  Info Default strip.VectorBegin.X:6.43828827572257,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:24:56.912 [Thd =202]  Info Default m_focusMapMode：0
2025-08-03 08:24:56.913 [Thd =202]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.43828827572257,EndPoint:-3.13295834650879
2025-08-03 08:24:56.913 [Thd =202]  Info Default strip.VectorBegin.X:1.13295834650879,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:24:57.127 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:24:57.129 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:24:57.985 [Thd =202]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 08:24:57.985 [Thd =202]  Info Default strip.VectorBegin.X:6.43828827572257,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:24:57.998 [Thd =187]  Info Default LaserLamp MaxPower:300,currentPower:123
2025-08-03 08:24:58.410 [Thd =202]  Info Default m_focusMapMode：0
2025-08-03 08:24:58.412 [Thd =202]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.43828827572257,EndPoint:-3.13295834650879
2025-08-03 08:24:58.412 [Thd =202]  Info Default strip.VectorBegin.X:1.13295834650879,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:24:58.626 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:24:58.629 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:24:59.482 [Thd =202]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 08:24:59.482 [Thd =202]  Info Default strip.VectorBegin.X:6.43828827572257,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:24:59.499 [Thd =187]  Error Default SyncSend recv cmd timeout
2025-08-03 08:24:59.515 [Thd =6]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-08-03 08:24:59.899 [Thd =202]  Info Default m_focusMapMode：0
2025-08-03 08:24:59.910 [Thd =202]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.43828827572257,EndPoint:-3.13295834650879
2025-08-03 08:24:59.910 [Thd =202]  Info Default strip.VectorBegin.X:1.13295834650879,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:25:00.124 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:00.127 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:00.981 [Thd =202]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 08:25:01.016 [Thd =6]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:01.018 [Thd =202]  Info Default AutoLightReturn:48,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 08:25:01.018 [Thd =202]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 08:25:01.018 [Thd =202]  Info Default strip.VectorBegin.X:6.43828827572257,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:25:01.049 [Thd =185]  Info Default LaserLamp MaxPower:300,currentPower:144
2025-08-03 08:25:01.434 [Thd =202]  Info Default m_focusMapMode：0
2025-08-03 08:25:01.436 [Thd =202]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.43828827572257,EndPoint:-3.13295834650879
2025-08-03 08:25:01.437 [Thd =202]  Info Default strip.VectorBegin.X:1.13295834650879,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:25:01.654 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:01.657 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:02.514 [Thd =202]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 08:25:02.514 [Thd =202]  Info Default strip.VectorBegin.X:6.43828827572257,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:25:02.550 [Thd =185]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:02.566 [Thd =6]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 08:25:02.930 [Thd =202]  Info Default m_focusMapMode：0
2025-08-03 08:25:02.933 [Thd =202]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.43828827572257,EndPoint:-3.13295834650879
2025-08-03 08:25:02.933 [Thd =202]  Info Default strip.VectorBegin.X:1.13295834650879,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:25:03.149 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:03.152 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:04.004 [Thd =202]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 08:25:04.004 [Thd =202]  Info Default strip.VectorBegin.X:6.43828827572257,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:25:04.067 [Thd =6]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:04.100 [Thd =247]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:25:04.425 [Thd =202]  Info Default m_focusMapMode：0
2025-08-03 08:25:04.427 [Thd =202]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.43828827572257,EndPoint:-3.13295834650879
2025-08-03 08:25:04.427 [Thd =202]  Info Default strip.VectorBegin.X:1.13295834650879,strip.VectorBegin.Y:7.53418872057944
2025-08-03 08:25:04.640 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:04.644 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:05.492 [Thd =202]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 08:25:05.531 [Thd =202]  Info Default AutoLightReturn:46,trans_result:0,ref_result:4，stripsIndex：0,scanStrips.Count:1
2025-08-03 08:25:05.532 [Thd =202]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:05.532 [Thd =202]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:05.532 [Thd =202]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:05.532 [Thd =202]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:05.601 [Thd =247]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:05.734 [Thd =202]  Info Default Light Complete 5,ResultMessge:结果:46,下调反射光台阶数
2025-08-03 08:25:05.779 [Thd =187]  Warn Default 还原光源最大功率
2025-08-03 08:25:05.780 [Thd =229]  Info Default LaserLamp MaxPower:300
2025-08-03 08:25:06.781 [Thd =187]  Info Default OpenLamp Transmission
2025-08-03 08:25:06.887 [Thd =207]  Info MMSFocus _isStop = true 
2025-08-03 08:25:07.585 [Thd =6]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:25:08.589 [Thd =187]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:25:08.589 [Thd =187]  Info Default CloseLamp Reflection
2025-08-03 08:25:09.392 [Thd =207]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:25:09.392 [Thd =205]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:25:09.621 [Thd =205]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:25:11.122 [Thd =205]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:11.393 [Thd =207]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:25:11.393 [Thd =185]  Info Default 聚焦Track已关闭
2025-08-03 08:25:18.792 [Thd =245]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:25:18.830 [Thd =229]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:27867.98MB VirtualMemorySize:200.3 GB
2025-08-03 08:25:31.423 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:27864.39MB VirtualMemorySize:200.3 GB
2025-08-03 08:25:31.548 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:25:31.548 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:25:31.592 [Thd =6]  Info Default 设置光标定环境中，请等待......
2025-08-03 08:25:31.593 [Thd =185]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 08:25:31.593 [Thd =185]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:31.593 [Thd =185]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:31.597 [Thd =185]  Info Default SetDistortionPara disaabled
2025-08-03 08:25:31.810 [Thd =185]  Info MMSFocus _isStop = true 
2025-08-03 08:25:31.810 [Thd =185]  Info Default aSwitchIndex index:0
2025-08-03 08:25:31.810 [Thd =185]  Info Default lens from ATF:
2025-08-03 08:25:31.810 [Thd =185]  Info Default objCount:3
2025-08-03 08:25:31.810 [Thd =185]  Info Default ratio:P200;objId:0
2025-08-03 08:25:31.810 [Thd =185]  Info Default ratio:P140;objId:1
2025-08-03 08:25:31.810 [Thd =185]  Info Default ratio:P100;objId:2
2025-08-03 08:25:31.810 [Thd =185]  Info Default ratio:;objId:0
2025-08-03 08:25:31.810 [Thd =185]  Info Default ratio:;objId:0
2025-08-03 08:25:31.810 [Thd =185]  Info Default ratio:;objId:0
2025-08-03 08:25:31.810 [Thd =185]  Info Default ratio:;objId:0
2025-08-03 08:25:31.811 [Thd =185]  Info Default ratio:;objId:0
2025-08-03 08:25:31.811 [Thd =185]  Info Default lens from system settings:
2025-08-03 08:25:31.811 [Thd =185]  Info Default systemlensettings lens count:3
2025-08-03 08:25:31.811 [Thd =185]  Info Default ratio:P200;objId:0
2025-08-03 08:25:31.811 [Thd =185]  Info Default ratio:P140;objId:1
2025-08-03 08:25:31.811 [Thd =185]  Info Default ratio:P100;objId:2
2025-08-03 08:25:31.813 [Thd =185]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:25:31.846 [Thd =185]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:25:31.849 [Thd =185]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:25:31.849 [Thd =185]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:25:31.850 [Thd =185]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:25:31.850 [Thd =185]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:25:31.850 [Thd =185]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:25:31.850 [Thd =185]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:25:31.850 [Thd =185]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:25:31.850 [Thd =185]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109976404593,StepStep:0.431712033068519,CosValueY:1,SinValueY:0
2025-08-03 08:25:32.097 [Thd =185]  Info strip vectorBegin:(6.404468,7.422525),VectorEnd:(1.099139,7.422525),CaptureBegin:(4.404468,7.422525)，CaptureEnd：(3.099139,7.422525),StepScan:0.435109976404593
2025-08-03 08:25:32.097 [Thd =185]  Info Default VectorBegin:(6.40446847072257,7.42252505557944)
2025-08-03 08:25:33.338 [Thd =23]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:25:33.339 [Thd =185]  Info Default SetMaxPower:300
2025-08-03 08:25:34.339 [Thd =247]  Info Default 打开光源，亮度：46%
2025-08-03 08:25:34.339 [Thd =205]  Info Default OpenLamp Transmission
2025-08-03 08:25:34.351 [Thd =206]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:25:35.143 [Thd =6]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:25:35.852 [Thd =206]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:36.341 [Thd =185]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:25:36.341 [Thd =6]  Info Default 聚焦Track已关闭
2025-08-03 08:25:37.825 [Thd =185]  Info MMSFocus _isStop = true 
2025-08-03 08:25:37.979 [Thd =205]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:25:37.979 [Thd =205]  Info Default OpenLamp Reflection
2025-08-03 08:25:39.329 [Thd =185]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:25:39.329 [Thd =23]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:25:39.787 [Thd =205]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:25:42.331 [Thd =185]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:25:42.331 [Thd =202]  Info Default 聚焦Track已开启
2025-08-03 08:25:46.371 [Thd =224]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:25:46.371 [Thd =224]  Info Default ChangeLightPath: False!
2025-08-03 08:25:46.371 [Thd =205]  Info Default 标定中，请等待......
2025-08-03 08:25:46.371 [Thd =247]  Info Default CurrentSize:2048,2048
2025-08-03 08:25:46.371 [Thd =247]  Info Default Camera size no change
2025-08-03 08:25:46.371 [Thd =6]  Info Default CurrentSize:2048,2048
2025-08-03 08:25:46.371 [Thd =6]  Info Default Camera size no change
2025-08-03 08:25:46.373 [Thd =247]  Info Default Set camera size success
2025-08-03 08:25:46.373 [Thd =247]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:25:46.373 [Thd =6]  Info Default Set camera size success
2025-08-03 08:25:46.373 [Thd =6]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:25:47.823 [Thd =247]  Info Default Set camera parameter
2025-08-03 08:25:47.823 [Thd =247]  Info Default TriggerMode is On,dont set
2025-08-03 08:25:47.823 [Thd =247]  Info Default BUFFER_COUNT no change
2025-08-03 08:25:48.327 [Thd =6]  Info Default Set camera parameter
2025-08-03 08:25:48.327 [Thd =6]  Info Default TriggerMode is On,dont set
2025-08-03 08:25:48.328 [Thd =6]  Info Default BUFFER_COUNT no change
2025-08-03 08:25:48.332 [Thd =185]  Info Default scanStrips:1,LampResult:46
2025-08-03 08:25:48.332 [Thd =185]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 08:25:48.333 [Thd =185]  Info Default strip.VectorBegin.X:6.40446847072257,strip.VectorBegin.Y:7.42252505557944
2025-08-03 08:25:48.372 [Thd =185]  Info Default m_focusMapMode：0
2025-08-03 08:25:48.374 [Thd =185]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:25:48.374 [Thd =185]  Info Default strip.VectorBegin.X:1.09913854150879,strip.VectorBegin.Y:7.42252505557944
2025-08-03 08:25:48.586 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:48.590 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:49.442 [Thd =185]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 08:25:49.442 [Thd =185]  Info Default strip.VectorBegin.X:6.40446847072257,strip.VectorBegin.Y:7.42252505557944
2025-08-03 08:25:49.487 [Thd =205]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:25:49.861 [Thd =185]  Info Default m_focusMapMode：0
2025-08-03 08:25:49.863 [Thd =185]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:25:49.863 [Thd =185]  Info Default strip.VectorBegin.X:1.09913854150879,strip.VectorBegin.Y:7.42252505557944
2025-08-03 08:25:50.075 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:50.079 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:50.933 [Thd =185]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 08:25:50.933 [Thd =185]  Info Default strip.VectorBegin.X:6.40446847072257,strip.VectorBegin.Y:7.42252505557944
2025-08-03 08:25:50.989 [Thd =205]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:51.021 [Thd =206]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 08:25:51.349 [Thd =185]  Info Default m_focusMapMode：0
2025-08-03 08:25:51.351 [Thd =185]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:25:51.351 [Thd =185]  Info Default strip.VectorBegin.X:1.09913854150879,strip.VectorBegin.Y:7.42252505557944
2025-08-03 08:25:51.563 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:51.567 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:52.419 [Thd =185]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 08:25:52.457 [Thd =185]  Info Default AutoLightReturn:45,trans_result:0,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 08:25:52.457 [Thd =185]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:52.457 [Thd =185]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:52.457 [Thd =185]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:52.457 [Thd =185]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 08:25:52.522 [Thd =206]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:52.658 [Thd =185]  Info Default Light Complete 5,ResultMessge:结果:45
2025-08-03 08:25:52.705 [Thd =206]  Warn Default 还原光源最大功率
2025-08-03 08:25:52.705 [Thd =205]  Info Default LaserLamp MaxPower:300
2025-08-03 08:25:53.706 [Thd =185]  Info Default OpenLamp Transmission
2025-08-03 08:25:54.350 [Thd =245]  Info MMSFocus _isStop = true 
2025-08-03 08:25:54.509 [Thd =6]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:25:55.514 [Thd =185]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:25:55.514 [Thd =185]  Info Default CloseLamp Reflection
2025-08-03 08:25:56.542 [Thd =206]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:25:56.854 [Thd =245]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:25:56.854 [Thd =185]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:25:58.044 [Thd =206]  Error Default SyncSend recv cmd timeout
2025-08-03 08:25:58.857 [Thd =245]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:25:58.857 [Thd =247]  Info Default 聚焦Track已关闭
2025-08-03 08:26:05.727 [Thd =224]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:26:05.765 [Thd =205]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:27865.55MB VirtualMemorySize:200.3 GB
2025-08-03 08:26:05.776 [Thd =205]  Info Default 光标定完成！
2025-08-03 08:26:10.611 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:26:10.721 [Thd =1]  Info Default ModuleBaseControl_Loaded：WaferStagePoint:3.74498658931797,7.57184324357944,,,AFCalibrationPoint:65008028.2887441,66152840.3976027
2025-08-03 08:26:12.818 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:Make0Calibration Before Memory usage:27869.33MB VirtualMemorySize:200.3 GB
2025-08-03 08:26:12.834 [Thd =224]  Info Default LineCameraStage:25
2025-08-03 08:26:12.835 [Thd =6]  Info Default CurrentSize:2048,2048
2025-08-03 08:26:12.835 [Thd =6]  Info Default Camera size no change
2025-08-03 08:26:12.835 [Thd =23]  Info Default CurrentSize:2048,2048
2025-08-03 08:26:12.835 [Thd =23]  Info Default Camera size no change
2025-08-03 08:26:12.836 [Thd =6]  Info Default Set camera size success
2025-08-03 08:26:12.836 [Thd =6]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:26:12.837 [Thd =23]  Info Default Set camera size success
2025-08-03 08:26:12.837 [Thd =23]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:26:14.286 [Thd =6]  Info Default Set camera parameter
2025-08-03 08:26:14.286 [Thd =6]  Info Default TriggerMode is On,dont set
2025-08-03 08:26:14.286 [Thd =6]  Info Default BUFFER_COUNT no change
2025-08-03 08:26:14.790 [Thd =23]  Info Default Set camera parameter
2025-08-03 08:26:14.791 [Thd =23]  Info Default TriggerMode is On,dont set
2025-08-03 08:26:14.791 [Thd =23]  Info Default BUFFER_COUNT no change
2025-08-03 08:26:14.799 [Thd =224]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:26:14.800 [Thd =224]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:26:14.800 [Thd =224]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:26:14.800 [Thd =224]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:26:14.800 [Thd =224]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:26:14.800 [Thd =224]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:26:14.800 [Thd =224]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:26:14.800 [Thd =224]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109976404593,StepStep:0.431712033068519,CosValueY:1,SinValueY:0
2025-08-03 08:26:15.045 [Thd =224]  Info strip vectorBegin:(6.404468,7.422525),VectorEnd:(1.099139,7.422525),CaptureBegin:(4.404468,7.422525)，CaptureEnd：(3.099139,7.422525),StepScan:0.435109976404593
2025-08-03 08:26:15.045 [Thd =224]  Info Default Calibreation AreaToLinePoint:(3.96935849431797,7.42252505557944)
2025-08-03 08:26:15.045 [Thd =6]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:26:15.045 [Thd =224]  Info Default SetMaxPower:300
2025-08-03 08:26:16.048 [Thd =247]  Info Default 打开光源，亮度：45%
2025-08-03 08:26:16.049 [Thd =6]  Info Default OpenLamp Transmission
2025-08-03 08:26:16.069 [Thd =245]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:26:16.853 [Thd =206]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:26:17.570 [Thd =245]  Error Default SyncSend recv cmd timeout
2025-08-03 08:26:17.747 [Thd =224]  Info MMSFocus _isStop = true 
2025-08-03 08:26:19.255 [Thd =224]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:26:19.255 [Thd =247]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:26:19.668 [Thd =6]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:26:19.668 [Thd =6]  Info Default OpenLamp Reflection
2025-08-03 08:26:21.474 [Thd =6]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:26:28.068 [Thd =229]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:26:28.068 [Thd =229]  Info Default ChangeLightPath: False!
2025-08-03 08:26:28.068 [Thd =6]  Info Default 设置Make0标定环境中,请等待......
2025-08-03 08:26:28.073 [Thd =228]  Info Default 标定中，请稍等......
2025-08-03 08:26:30.076 [Thd =224]  Info MMSFocus _isStop = true 
2025-08-03 08:26:31.197 [Thd =23]  Warn Default Optimum:1.300um
2025-08-03 08:26:33.867 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:33.869 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:35.076 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:35.078 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:36.286 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:36.288 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:37.501 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:37.503 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:38.710 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:38.712 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:39.924 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:39.927 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:41.142 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:41.145 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:42.355 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:42.357 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:43.586 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:43.588 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:44.805 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:44.806 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:46.017 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 08:26:46.019 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:-4.40446847072257,EndPoint:-3.09913854150879
2025-08-03 08:26:46.587 [Thd =224]  Info Default FitPosition:1.2398727944599,score:38.3293805209938
2025-08-03 08:26:46.587 [Thd =224]  Info Default FitPosition:0.993137559001651,score:98.4576113100111
2025-08-03 08:26:46.587 [Thd =206]  Info Default Restore,Please wait......
2025-08-03 08:26:46.587 [Thd =205]  Warn Default 还原光源最大功率
2025-08-03 08:26:46.588 [Thd =224]  Info Default LaserLamp MaxPower:300
2025-08-03 08:26:47.588 [Thd =217]  Info MMSFocus _isStop = true 
2025-08-03 08:26:47.588 [Thd =205]  Info Default OpenLamp Transmission
2025-08-03 08:26:48.401 [Thd =247]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:26:49.397 [Thd =205]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:26:49.397 [Thd =205]  Info Default CloseLamp Reflection
2025-08-03 08:26:50.413 [Thd =217]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:26:51.915 [Thd =217]  Error Default SyncSend recv cmd timeout
2025-08-03 08:26:59.621 [Thd =251]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:26:59.710 [Thd =247]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:<Make0Calibration>b__23_1 End Memory usage:27890.03MB VirtualMemorySize:200.4 GB
2025-08-03 08:27:06.050 [Thd =1]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:27:06.294 [Thd =1]  Info Default make0 AreaToLinePoint:(3.96935849431797,7.42252505557944)
2025-08-03 08:27:06.351 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:ButtonMake_Click Before Memory usage:27892.37MB VirtualMemorySize:200.4 GB
2025-08-03 08:27:06.630 [Thd =205]  Info MMSFocus _isStop = true 
2025-08-03 08:27:09.881 [Thd =205]  Info Default 保存AF标定结果成功！
2025-08-03 08:27:10.161 [Thd =232]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0+<>c__DisplayClass33_0MethodName:<ButtonMake_Click>b__1 End Memory usage:27894.4MB VirtualMemorySize:200.4 GB
2025-08-03 08:27:10.161 [Thd =217]  Info Default SavePoint：WaferStagePoint:3.74498658931797,7.57184324357944,,,AFCalibrationPoint:65095388.0035056,66106571.2704959
2025-08-03 08:27:13.879 [Thd =205]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:27:13.879 [Thd =206]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:27:15.890 [Thd =205]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:27:15.890 [Thd =206]  Info Default 聚焦Track已关闭
2025-08-03 08:27:42.564 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:27899.7MB VirtualMemorySize:200.4 GB
2025-08-03 08:27:42.723 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click End Memory usage:27899.7MB VirtualMemorySize:200.4 GB
2025-08-03 08:27:42.821 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:27900.27MB VirtualMemorySize:200.4 GB
2025-08-03 08:27:46.618 [Thd =232]  Info Default 设置平场校正环境中......
2025-08-03 08:27:46.619 [Thd =206]  Info Default Flatfield Corrention Init******************
2025-08-03 08:27:47.223 [Thd =206]  Info MMSFocus _isStop = true 
2025-08-03 08:27:47.223 [Thd =206]  Info Default aSwitchIndex index:0
2025-08-03 08:27:47.223 [Thd =206]  Info Default lens from ATF:
2025-08-03 08:27:47.223 [Thd =206]  Info Default objCount:3
2025-08-03 08:27:47.223 [Thd =206]  Info Default ratio:P200;objId:0
2025-08-03 08:27:47.223 [Thd =206]  Info Default ratio:P140;objId:1
2025-08-03 08:27:47.223 [Thd =206]  Info Default ratio:P100;objId:2
2025-08-03 08:27:47.223 [Thd =206]  Info Default ratio:;objId:0
2025-08-03 08:27:47.223 [Thd =206]  Info Default ratio:;objId:0
2025-08-03 08:27:47.223 [Thd =206]  Info Default ratio:;objId:0
2025-08-03 08:27:47.223 [Thd =206]  Info Default ratio:;objId:0
2025-08-03 08:27:47.224 [Thd =206]  Info Default ratio:;objId:0
2025-08-03 08:27:47.224 [Thd =206]  Info Default lens from system settings:
2025-08-03 08:27:47.224 [Thd =206]  Info Default systemlensettings lens count:3
2025-08-03 08:27:47.224 [Thd =206]  Info Default ratio:P200;objId:0
2025-08-03 08:27:47.224 [Thd =206]  Info Default ratio:P140;objId:1
2025-08-03 08:27:47.224 [Thd =206]  Info Default ratio:P100;objId:2
2025-08-03 08:27:47.226 [Thd =206]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:27:47.260 [Thd =206]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:27:47.263 [Thd =206]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:27:47.263 [Thd =206]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:27:47.264 [Thd =206]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:27:47.264 [Thd =206]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:27:47.264 [Thd =206]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:27:47.264 [Thd =206]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:27:47.264 [Thd =206]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:27:47.264 [Thd =206]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109976404593,StepStep:0.431712033068519,CosValueY:1,SinValueY:0
2025-08-03 08:27:47.511 [Thd =206]  Info strip vectorBegin:(-10.465493,70.294625),VectorEnd:(-15.770822,70.294625),CaptureBegin:(-12.465493,70.294625)，CaptureEnd：(-13.770822,70.294625),StepScan:0.435109976404593
2025-08-03 08:27:48.219 [Thd =251]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:27:48.219 [Thd =206]  Info Default SetMaxPower:300
2025-08-03 08:27:49.221 [Thd =224]  Info Default 打开光源，亮度：45%
2025-08-03 08:27:49.221 [Thd =247]  Info Default OpenLamp Transmission
2025-08-03 08:27:49.245 [Thd =229]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:27:50.025 [Thd =217]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:27:50.747 [Thd =229]  Error Default SyncSend recv cmd timeout
2025-08-03 08:27:51.221 [Thd =206]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:27:51.221 [Thd =229]  Info Default 聚焦Track已关闭
2025-08-03 08:27:52.835 [Thd =247]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:27:52.835 [Thd =247]  Info Default OpenLamp Reflection
2025-08-03 08:27:53.231 [Thd =206]  Info MMSFocus _isStop = true 
2025-08-03 08:27:54.641 [Thd =247]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:27:54.735 [Thd =206]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:27:54.735 [Thd =205]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:27:57.746 [Thd =206]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:27:57.747 [Thd =207]  Info Default 聚焦Track已开启
2025-08-03 08:28:01.240 [Thd =6]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:28:01.243 [Thd =6]  Info Default ChangeLightPath: False!
2025-08-03 08:28:01.243 [Thd =217]  Info Default Open lamp，Power:45%
2025-08-03 08:28:01.243 [Thd =206]  Info Default OpenLamp Transmission
2025-08-03 08:28:02.046 [Thd =187]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:28:02.247 [Thd =206]  Info Default OpenLamp Reflection
2025-08-03 08:28:04.052 [Thd =206]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:28:04.058 [Thd =207]  Info Default 扫描图片......
2025-08-03 08:28:04.059 [Thd =202]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:256
2025-08-03 08:28:04.059 [Thd =202]  Info Default CurrentSize:2048,2048
2025-08-03 08:28:04.059 [Thd =202]  Info Default Camera size no change
2025-08-03 08:28:04.059 [Thd =205]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:192
2025-08-03 08:28:04.059 [Thd =205]  Info Default CurrentSize:2048,2048
2025-08-03 08:28:04.059 [Thd =205]  Info Default Camera size no change
2025-08-03 08:28:04.059 [Thd =217]  Info Default 平场校正中,请等待 ......
2025-08-03 08:28:04.060 [Thd =202]  Info Default Set camera size success
2025-08-03 08:28:04.060 [Thd =202]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:28:04.535 [Thd =205]  Info Default Set camera size success
2025-08-03 08:28:04.535 [Thd =205]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:28:05.039 [Thd =202]  Info Default Set camera parameter
2025-08-03 08:28:05.039 [Thd =202]  Info Default TriggerMode is On,dont set
2025-08-03 08:28:05.039 [Thd =202]  Info Default BUFFER_COUNT no change
2025-08-03 08:28:06.017 [Thd =205]  Info Default Set camera parameter
2025-08-03 08:28:06.018 [Thd =205]  Info Default TriggerMode is On,dont set
2025-08-03 08:28:06.018 [Thd =205]  Info Default BUFFER_COUNT no change
2025-08-03 08:28:11.020 [Thd =206]  Info Default FlatfieldCorrention scanStrips:1,Intensity:45
2025-08-03 08:28:11.020 [Thd =206]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:0,Light:45
2025-08-03 08:28:11.020 [Thd =206]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4654925113566,strip.VectorBegin.Y:70.2946254550633
2025-08-03 08:28:11.348 [Thd =206]  Info Default m_focusMapMode：0
2025-08-03 08:28:11.350 [Thd =206]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:12.4654925113566,EndPoint:13.7708224405704
2025-08-03 08:28:11.350 [Thd =206]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7708224405704,strip.VectorBegin.Y:70.2946254550633
2025-08-03 08:28:11.560 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\Flatfield
2025-08-03 08:28:11.560 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\Flatfield
2025-08-03 08:28:12.421 [Thd =206]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:1,Light:44
2025-08-03 08:28:12.421 [Thd =206]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4654925113566,strip.VectorBegin.Y:70.2946254550633
2025-08-03 08:28:12.458 [Thd =6]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 08:28:12.841 [Thd =206]  Info Default m_focusMapMode：0
2025-08-03 08:28:12.843 [Thd =206]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:12.4654925113566,EndPoint:13.7708224405704
2025-08-03 08:28:12.843 [Thd =206]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7708224405704,strip.VectorBegin.Y:70.2946254550633
2025-08-03 08:28:13.054 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\Flatfield
2025-08-03 08:28:13.054 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\Flatfield
2025-08-03 08:28:13.908 [Thd =206]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:2,Light:45
2025-08-03 08:28:13.908 [Thd =206]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4654925113566,strip.VectorBegin.Y:70.2946254550633
2025-08-03 08:28:13.959 [Thd =6]  Error Default SyncSend recv cmd timeout
2025-08-03 08:28:13.975 [Thd =251]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:28:14.331 [Thd =206]  Info Default m_focusMapMode：0
2025-08-03 08:28:14.333 [Thd =206]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:12.4654925113566,EndPoint:13.7708224405704
2025-08-03 08:28:14.333 [Thd =206]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7708224405704,strip.VectorBegin.Y:70.2946254550633
2025-08-03 08:28:14.543 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\Flatfield
2025-08-03 08:28:14.544 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-YXC\rcp_DB_1\Flatfield
2025-08-03 08:28:15.476 [Thd =251]  Error Default SyncSend recv cmd timeout
2025-08-03 08:28:15.607 [Thd =217]  Warn Default 还原光源最大功率
2025-08-03 08:28:15.607 [Thd =206]  Info Default LaserLamp MaxPower:300
2025-08-03 08:28:16.609 [Thd =202]  Info Default OpenLamp Transmission
2025-08-03 08:28:16.758 [Thd =247]  Info MMSFocus _isStop = true 
2025-08-03 08:28:17.412 [Thd =205]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:28:18.416 [Thd =202]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:28:18.416 [Thd =202]  Info Default CloseLamp Reflection
2025-08-03 08:28:19.262 [Thd =247]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:28:19.262 [Thd =205]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:28:19.433 [Thd =205]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:28:20.934 [Thd =205]  Error Default SyncSend recv cmd timeout
2025-08-03 08:28:21.271 [Thd =247]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:28:21.271 [Thd =247]  Info Default 聚焦Track已关闭
2025-08-03 08:28:28.628 [Thd =229]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:28:28.628 [Thd =229]  Info Default 平场校正中,请等待 ......
2025-08-03 08:28:29.779 [Thd =251]  Info Default 校正完成
2025-08-03 08:28:32.278 [Thd =1]  Info flatfieldbtn Ok_Click  begin
2025-08-03 08:28:32.279 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm begin
2025-08-03 08:28:32.281 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy begin
2025-08-03 08:28:32.281 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy end
2025-08-03 08:28:32.281 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm end
2025-08-03 08:28:32.281 [Thd =1]  Info ExecuteSuccess  begin
2025-08-03 08:28:32.281 [Thd =1]  Info ExecuteSuccess  end
2025-08-03 08:28:33.729 [Thd =1]  Info flatfield btnOk_Click  end
2025-08-03 08:28:35.429 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnXYCalib_Click Before Memory usage:27992.98MB VirtualMemorySize:200.5 GB
2025-08-03 08:28:35.610 [Thd =217]  Info Default 设置RTB 标定环境中,请等待 ......
2025-08-03 08:28:35.611 [Thd =228]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 08:28:35.615 [Thd =228]  Info Default SetDistortionPara disaabled
2025-08-03 08:28:35.641 [Thd =228]  Info MMSFocus _isStop = true 
2025-08-03 08:28:35.641 [Thd =228]  Info Default aSwitchIndex index:0
2025-08-03 08:28:35.641 [Thd =228]  Info Default lens from ATF:
2025-08-03 08:28:35.641 [Thd =228]  Info Default objCount:3
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:P200;objId:0
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:P140;objId:1
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:P100;objId:2
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:;objId:0
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:;objId:0
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:;objId:0
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:;objId:0
2025-08-03 08:28:35.641 [Thd =228]  Info Default ratio:;objId:0
2025-08-03 08:28:35.642 [Thd =228]  Info Default lens from system settings:
2025-08-03 08:28:35.642 [Thd =228]  Info Default systemlensettings lens count:3
2025-08-03 08:28:35.642 [Thd =228]  Info Default ratio:P200;objId:0
2025-08-03 08:28:35.642 [Thd =228]  Info Default ratio:P140;objId:1
2025-08-03 08:28:35.642 [Thd =228]  Info Default ratio:P100;objId:2
2025-08-03 08:28:35.644 [Thd =228]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:28:35.677 [Thd =228]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:28:35.680 [Thd =228]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:28:35.680 [Thd =228]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:28:35.680 [Thd =228]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:28:35.681 [Thd =228]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:28:35.681 [Thd =228]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:28:35.681 [Thd =228]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:28:35.681 [Thd =228]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:28:35.681 [Thd =228]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109976404593,StepStep:0.431712033068519,CosValueY:1,SinValueY:0
2025-08-03 08:28:35.681 [Thd =228]  Info Default deltax_stage 22.6110754764902, deltay_stage:0.
2025-08-03 08:28:35.681 [Thd =228]  Info Default MoveStageForMarkCol101 point (62.0420573886872, 50.0561558067144), GDS ref(5500000, 138400000), gdsObject(28111000, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:28:35.681 [Thd =228]  Info Default deltax_stage 0, deltay_stage:-123.226025036766.
2025-08-03 08:28:35.681 [Thd =228]  Info Default MoveStageForMarkCol102 point (-61.1839676480786, 50.0561558067144), GDS ref(28111000, 138400000), gdsObject(28111000, 15174000), stageRef(62.0420573886872, 50.0561558067144).
2025-08-03 08:28:35.681 [Thd =228]  Info Default located_pos:(-61.1839676480786, 50.0561558067144)
2025-08-03 08:28:42.415 [Thd =228]  Info strip vectorBegin:(-58.524486,49.906838),VectorEnd:(-63.829816,49.906838),CaptureBegin:(-60.524486,49.906838)，CaptureEnd：(-61.829816,49.906838),StepScan:0.435109976404593
2025-08-03 08:28:42.415 [Thd =228]  Info Default VectorBegin:(-58.524485766674,49.9068376187144)
2025-08-03 08:28:43.643 [Thd =202]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:28:43.643 [Thd =228]  Info Default SetMaxPower:300
2025-08-03 08:28:44.645 [Thd =174]  Info Default 打开光源，亮度：45%
2025-08-03 08:28:44.645 [Thd =217]  Info Default OpenLamp Transmission
2025-08-03 08:28:44.659 [Thd =202]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:28:45.448 [Thd =206]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:28:46.161 [Thd =202]  Error Default SyncSend recv cmd timeout
2025-08-03 08:28:46.646 [Thd =228]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:28:46.646 [Thd =251]  Info Default 聚焦Track已关闭
2025-08-03 08:28:48.259 [Thd =217]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:28:48.259 [Thd =217]  Info Default OpenLamp Reflection
2025-08-03 08:28:48.652 [Thd =228]  Info MMSFocus _isStop = true 
2025-08-03 08:28:50.065 [Thd =217]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:28:50.156 [Thd =228]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:28:50.156 [Thd =187]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:28:53.158 [Thd =228]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:28:53.158 [Thd =217]  Info Default 聚焦Track已开启
2025-08-03 08:28:56.677 [Thd =205]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:28:56.677 [Thd =205]  Info Default ChangeLightPath: False!
2025-08-03 08:28:56.677 [Thd =205]  Info Default RTB 标定中,请等待 ......
2025-08-03 08:28:56.677 [Thd =251]  Info Default CurrentSize:2048,2048
2025-08-03 08:28:56.677 [Thd =251]  Info Default Camera size no change
2025-08-03 08:28:56.677 [Thd =217]  Info Default CurrentSize:2048,2048
2025-08-03 08:28:56.678 [Thd =217]  Info Default Camera size no change
2025-08-03 08:28:56.679 [Thd =251]  Info Default Set camera size success
2025-08-03 08:28:56.679 [Thd =251]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:28:56.679 [Thd =217]  Info Default Set camera size success
2025-08-03 08:28:56.679 [Thd =217]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:28:58.131 [Thd =251]  Info Default Set camera parameter
2025-08-03 08:28:58.131 [Thd =251]  Info Default TriggerMode is On,dont set
2025-08-03 08:28:58.131 [Thd =251]  Info Default BUFFER_COUNT no change
2025-08-03 08:28:58.633 [Thd =217]  Info Default Set camera parameter
2025-08-03 08:28:58.634 [Thd =217]  Info Default TriggerMode is On,dont set
2025-08-03 08:28:58.634 [Thd =217]  Info Default BUFFER_COUNT no change
2025-08-03 08:28:58.641 [Thd =228]  Info Default SetDistortionPara disaabled
2025-08-03 08:28:58.641 [Thd =228]  Info Default scanStrips:1
2025-08-03 08:28:58.685 [Thd =228]  Info Default m_focusMapMode：0
2025-08-03 08:28:58.687 [Thd =228]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456043166305,BeginPoint:60.524485766674,EndPoint:61.8298156958878
2025-08-03 08:28:59.701 [Thd =228]  Info Default Get_Tolerance_and_Rounding:******Tolerance********
2025-08-03 08:29:02.519 [Thd =228]  Info Default Get_Tolerance_and_Rounding:-----------Tolerance-------------
2025-08-03 08:29:02.565 [Thd =228]  Warn Default 还原光源最大功率
2025-08-03 08:29:02.565 [Thd =217]  Info Default LaserLamp MaxPower:300
2025-08-03 08:29:03.566 [Thd =202]  Info Default OpenLamp Transmission
2025-08-03 08:29:04.172 [Thd =251]  Info MMSFocus _isStop = true 
2025-08-03 08:29:04.370 [Thd =187]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:29:05.373 [Thd =202]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:29:05.373 [Thd =202]  Info Default CloseLamp Reflection
2025-08-03 08:29:06.399 [Thd =187]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:29:06.687 [Thd =251]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:29:06.687 [Thd =228]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:29:07.900 [Thd =187]  Error Default SyncSend recv cmd timeout
2025-08-03 08:29:08.688 [Thd =251]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:29:08.688 [Thd =228]  Info Default 聚焦Track已关闭
2025-08-03 08:29:15.583 [Thd =206]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:29:15.593 [Thd =229]  Info Default 公差标定完成
2025-08-03 08:29:15.620 [Thd =217]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:<btnXYCalib_Click>b__28_1 Before Memory usage:28009.48MB VirtualMemorySize:200.5 GB
2025-08-03 08:33:50.708 [Thd =1]  Info Default CDdefectResolution is 0.2
2025-08-03 08:33:50.709 [Thd =1]  Info Default CDdefectResolutionBil is 0.25
2025-08-03 08:33:50.709 [Thd =1]  Info Default PHdefectResolution is 0.2
2025-08-03 08:33:55.590 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:33:55.590 [Thd =1]  Info Default MaskScaleY:0.999999796822418
2025-08-03 08:33:55.590 [Thd =1]  Info Default MaskScaleX:0.999996661968144,Orth_Y_BeforR:0.141764054199409
2025-08-03 08:33:57.811 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:34:12.018 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 08:34:12.061 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 08:34:12.061 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 08:34:12.061 [Thd =205]  Info Default Start [1/1]
2025-08-03 08:34:12.066 [Thd =224]  Info Default 开始检查！
2025-08-03 08:34:19.434 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 08:34:19.434 [Thd =247]  Info Default 初始化插件
2025-08-03 08:34:19.434 [Thd =207]  Info Default CurrentSize:2048,2048
2025-08-03 08:34:19.434 [Thd =207]  Info Default Camera size no change
2025-08-03 08:34:19.434 [Thd =228]  Info Default CurrentSize:2048,2048
2025-08-03 08:34:19.435 [Thd =228]  Info Default Camera size no change
2025-08-03 08:34:19.435 [Thd =202]  Info Default 设置 TDI 相机参数...
2025-08-03 08:34:19.435 [Thd =206]  Info Default 初始化DB目录
2025-08-03 08:34:19.436 [Thd =207]  Info Default Set camera size success
2025-08-03 08:34:19.436 [Thd =207]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:34:19.437 [Thd =228]  Info Default Set camera size success
2025-08-03 08:34:19.437 [Thd =228]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:34:19.437 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:34:19.437 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:34:19.437 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 08:34:19.560 [Thd =1]  Info Default deltax_stage 14.9114237748076, deltay_stage:0.
2025-08-03 08:34:19.560 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0417398743632, 57.7558075149438), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:34:19.560 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59981554411214.
2025-08-03 08:34:19.560 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6415554184754, 57.7558075149438), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0417398743632, 57.7558075149438).
2025-08-03 08:34:19.560 [Thd =1]  Info Default located_pos:(69.6415554184754, 57.7558075149438)
2025-08-03 08:34:19.561 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.400025275296.
2025-08-03 08:34:19.561 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3589003106487, 72.6672313024301), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0411249646476, 72.6672313024301).
2025-08-03 08:34:19.561 [Thd =1]  Info Default located_pos:(-62.3589003106487, 72.6672313024301)
2025-08-03 08:34:19.561 [Thd =217]  Info Default 初始化DPU服务器！
2025-08-03 08:34:19.561 [Thd =187]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 08:34:27.032 [Thd =233]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425439,"ServiceStartTime":"2025\/8\/3 8:20:18","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:27.033 [Thd =249]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425439,"ServiceStartTime":"2025\/8\/3 8:20:17","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":2},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:27.033 [Thd =233]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425439,"ServiceStartTime":"2025\/8\/3 8:20:17","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:27.034 [Thd =249]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425439,"ServiceStartTime":"2025\/8\/3 8:21:13","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:27.561 [Thd =228]  Info Default Set camera parameter
2025-08-03 08:34:27.561 [Thd =228]  Info Default TriggerMode is On,dont set
2025-08-03 08:34:27.561 [Thd =228]  Info Default BUFFER_COUNT no change
2025-08-03 08:34:28.039 [Thd =207]  Info Default Set camera parameter
2025-08-03 08:34:28.040 [Thd =207]  Info Default TriggerMode is On,dont set
2025-08-03 08:34:28.040 [Thd =207]  Info Default BUFFER_COUNT no change
2025-08-03 08:34:29.554 [Thd =228]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425444,"ServiceStartTime":"2025\/8\/3 8:34:26","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":1,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:29.556 [Thd =217]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425444,"ServiceStartTime":"2025\/8\/3 8:34:26","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:29.602 [Thd =188]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425444,"ServiceStartTime":"2025\/8\/3 8:34:27","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:29.616 [Thd =206]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":425444,"ServiceStartTime":"2025\/8\/3 8:35:22","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:34:30.071 [Thd =187]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 08:34:30.104 [Thd =1]  Info Default Register inspect event！
2025-08-03 08:34:30.120 [Thd =1]  Info Default initial*****Light_intensity:45, min:10, max:220
2025-08-03 08:34:30.120 [Thd =228]  Info Default 初始化检测数据
2025-08-03 08:34:30.120 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 08:34:30.121 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 08:34:30.121 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3589003106487, reference point Stage_Y: 72.6672313024301, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 08:34:30.121 [Thd =217]  Info Default m_start_strip_no:0
2025-08-03 08:34:30.121 [Thd =217]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 08:34:30.132 [Thd =217]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.092,"m_y_tolerance":-0.096,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,221,3,0,1130102784,1065353216,1065353216,0,0,0],"m_R_collect":[200,204,104,906139867,1128792064,1065353216,1065353216,0,0,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.136,"m_y_tolerance_R":-0.194,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 08:34:30.133 [Thd =217]  Info Default m_line_camera_cols:321
2025-08-03 08:34:30.133 [Thd =217]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 08:34:30.133 [Thd =217]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 08:34:30.137 [Thd =217]  Info Default SetDistortionPara disaabled
2025-08-03 08:34:30.137 [Thd =217]  Info Default Set distortion correction parameters End
2025-08-03 08:34:30.137 [Thd =217]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 08:34:30.565 [Thd =217]  Info Default InitDie2DBRes Success!!!!
2025-08-03 08:34:33.779 [Thd =1]  Info Default Successful alignment！
2025-08-03 08:34:33.779 [Thd =233]  Info Default 对准完成！
2025-08-03 08:34:33.780 [Thd =207]  Info Default 稍等！设置相机参数中
2025-08-03 08:34:33.780 [Thd =228]  Info Default 注册相机取图
2025-08-03 08:34:33.780 [Thd =174]  Info Default 移动到起始点位
2025-08-03 08:34:34.037 [Thd =217]  Info MMSFocus _isStop = true 
2025-08-03 08:34:34.242 [Thd =217]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109976404593,StepStep:0.431712033068519,CosValueY:1,SinValueY:0
2025-08-03 08:34:34.242 [Thd =188]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:34:34.242 [Thd =217]  Info Default SetMaxPower:300
2025-08-03 08:34:35.243 [Thd =174]  Info Default 打开光源，亮度：45%
2025-08-03 08:34:35.243 [Thd =187]  Info Default OpenLamp Transmission
2025-08-03 08:34:35.257 [Thd =249]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:34:36.047 [Thd =188]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:34:36.759 [Thd =249]  Error Default SyncSend recv cmd timeout
2025-08-03 08:34:37.252 [Thd =207]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:34:37.252 [Thd =174]  Info Default 聚焦Track已关闭
2025-08-03 08:34:38.553 [Thd =207]  Info MMSFocus _isStop = true 
2025-08-03 08:34:38.858 [Thd =187]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:34:38.858 [Thd =187]  Info Default OpenLamp Reflection
2025-08-03 08:34:40.058 [Thd =207]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:34:40.059 [Thd =251]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:34:40.680 [Thd =187]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:34:42.060 [Thd =207]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:34:42.060 [Thd =207]  Info Default 聚焦Track已开启
2025-08-03 08:34:47.264 [Thd =233]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:34:47.264 [Thd =233]  Info Default ChangeLightPath: False!
2025-08-03 08:34:47.264 [Thd =233]  Info Default 执行MarkOffSet......
2025-08-03 08:34:47.264 [Thd =251]  Info Default CurrentSize:2048,2048
2025-08-03 08:34:47.264 [Thd =251]  Info Default Camera size no change
2025-08-03 08:34:47.264 [Thd =251]  Info Default Set camera size success
2025-08-03 08:34:47.264 [Thd =251]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:34:48.242 [Thd =251]  Info Default Set camera parameter
2025-08-03 08:34:48.242 [Thd =251]  Info Default TriggerMode is On,dont set
2025-08-03 08:34:48.242 [Thd =251]  Info Default BUFFER_COUNT no change
2025-08-03 08:34:48.245 [Thd =217]  Info strip vectorBegin:(59.449453,72.517913),VectorEnd:(64.754783,72.517913),CaptureBegin:(61.449453,72.517913)，CaptureEnd：(62.754783,72.517913),StepScan:0.435109976404593
2025-08-03 08:34:52.334 [Thd =217]  Info Default m_focusMapMode：0
2025-08-03 08:34:52.336 [Thd =217]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456043166305,BeginPoint:-61.4494531968384,EndPoint:-62.7547831260522
2025-08-03 08:34:52.529 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 
2025-08-03 08:34:52.552 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 
2025-08-03 08:34:52.856 [Thd =31]  Info Default stormCore.MatchTemplate:0.8588921
2025-08-03 08:34:52.856 [Thd =251]  Warn Default Mark offset match score:0.85889
2025-08-03 08:34:53.271 [Thd =217]  Info MMSFocus _isStop = true 
2025-08-03 08:34:53.794 [Thd =206]  Warn Default 还原光源最大功率
2025-08-03 08:34:53.794 [Thd =217]  Info Default LaserLamp MaxPower:300
2025-08-03 08:34:54.796 [Thd =251]  Info Default OpenLamp Transmission
2025-08-03 08:34:54.796 [Thd =224]  Info MMSFocus _isStop = true 
2025-08-03 08:34:55.599 [Thd =187]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:34:56.605 [Thd =251]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:34:56.605 [Thd =251]  Info Default CloseLamp Reflection
2025-08-03 08:34:57.301 [Thd =224]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:34:57.301 [Thd =228]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:34:57.625 [Thd =188]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:34:59.127 [Thd =188]  Error Default SyncSend recv cmd timeout
2025-08-03 08:34:59.303 [Thd =224]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:34:59.303 [Thd =233]  Info Default 聚焦Track已关闭
2025-08-03 08:35:06.812 [Thd =207]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:35:08.031 [Thd =1]  Info MMSFocus _isStop = true 
2025-08-03 08:35:09.152 [Thd =1]  Info Default Move to the inspect start point，Starting point coordinates：X:69.6415554184754,Y:57.7558075149438,OffSet.X:5,OffSet.Y:5
2025-08-03 08:35:09.152 [Thd =251]  Warn Default 标记偏移点X:5，Y:5
2025-08-03 08:35:11.274 [Thd =217]  Info Default Zposition:0
2025-08-03 08:35:22.662 [Thd =249]  Info Default Wait! Setting camera parameters 
2025-08-03 08:35:22.662 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 08:35:22.696 [Thd =1]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 08:35:22.698 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 08:35:22.699 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 08:35:22.699 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() Running ! 
2025-08-03 08:35:22.699 [Thd =1]  Info Default AutoWorderHelper:StartWorker.
2025-08-03 08:35:22.699 [Thd =1]  Info Default AutoWorderHelper:SaveTask2DB.
2025-08-03 08:35:22.904 [Thd =1]  Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 2947
2025-08-03 08:35:22.904 [Thd =1]  Info Default AutoWorderHelper:InitInspectingData.
2025-08-03 08:35:22.904 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0
2025-08-03 08:35:22.905 [Thd =224]  Info Default 检测线程启动！
2025-08-03 08:35:22.905 [Thd =232]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 08:35:22.905 [Thd =188]  Info Default 结果处理线程启动！
2025-08-03 08:35:22.907 [Thd =232]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 08:35:22.908 [Thd =232]  Info Default SetSystemStatus Success
2025-08-03 08:35:22.908 [Thd =232]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 08:35:22.932 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2947
2025-08-03 08:35:22.932 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2947
2025-08-03 08:35:23.171 [Thd =232]  Info MMSFocus _isStop = true 
2025-08-03 08:35:23.171 [Thd =232]  Info Default aSwitchIndex index:0
2025-08-03 08:35:23.171 [Thd =232]  Info Default lens from ATF:
2025-08-03 08:35:23.171 [Thd =232]  Info Default objCount:3
2025-08-03 08:35:23.171 [Thd =232]  Info Default ratio:P200;objId:0
2025-08-03 08:35:23.171 [Thd =232]  Info Default ratio:P140;objId:1
2025-08-03 08:35:23.171 [Thd =232]  Info Default ratio:P100;objId:2
2025-08-03 08:35:23.171 [Thd =232]  Info Default ratio:;objId:0
2025-08-03 08:35:23.172 [Thd =232]  Info Default ratio:;objId:0
2025-08-03 08:35:23.172 [Thd =232]  Info Default ratio:;objId:0
2025-08-03 08:35:23.172 [Thd =232]  Info Default ratio:;objId:0
2025-08-03 08:35:23.172 [Thd =232]  Info Default ratio:;objId:0
2025-08-03 08:35:23.172 [Thd =232]  Info Default lens from system settings:
2025-08-03 08:35:23.172 [Thd =232]  Info Default systemlensettings lens count:3
2025-08-03 08:35:23.172 [Thd =232]  Info Default ratio:P200;objId:0
2025-08-03 08:35:23.172 [Thd =232]  Info Default ratio:P140;objId:1
2025-08-03 08:35:23.172 [Thd =232]  Info Default ratio:P100;objId:2
2025-08-03 08:35:23.175 [Thd =232]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:35:23.208 [Thd =232]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:35:23.208 [Thd =232]  Info Default defectData.RecivePicCount:0
2025-08-03 08:35:23.208 [Thd =232]  Info Default start inspect task pic_count of one strip:321, big_strip_count:261. 
2025-08-03 08:35:23.208 [Thd =232]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:35:23.208 [Thd =232]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:35:23.208 [Thd =232]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:35:23.209 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:35:23.209 [Thd =1]  Info Default MaskScaleY:0.999999796822418
2025-08-03 08:35:23.209 [Thd =1]  Info Default MaskScaleX:0.999996661968144,Orth_Y_BeforR:0.141764054199409
2025-08-03 08:35:23.209 [Thd =232]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:35:23.209 [Thd =232]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:35:23.209 [Thd =232]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:35:23.209 [Thd =232]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:35:23.209 [Thd =232]  Info Default scaleX: 0.999996661968144, scaleY:0.999999796822418
2025-08-03 08:35:23.209 [Thd =232]  Info Default Orth_Y_BeforR: 0.141764054199409,StageScaleX:0.999996661968144,Y:0.999999796822418
2025-08-03 08:35:23.209 [Thd =232]  Info Default LengthOfAccelerationAndDeceleration: 2
2025-08-03 08:35:25.218 [Thd =232]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:35:25.218 [Thd =228]  Info Default 聚焦Track已关闭
2025-08-03 08:35:25.219 [Thd =188]  Info Default 正在切换线阵相机光路
2025-08-03 08:35:30.618 [Thd =1]  Info Default VerifyModule.StopInspect() Stop !
2025-08-03 08:35:30.628 [Thd =1]  Info Default InspectProxy.Stop, InspectRuntimeInfo Thread health：
No memory resources：0001-01-01 00:00:00 
Excessive striping：0001-01-01 00:00:00 
 
Camera capture：
Camera capture received：2025-08-03 08:34:52 
no received resource：0001-01-01 00:00:00 
 
result handles thread health：
Result processing time：2025-08-03 08:35:30 
The number of images processed：0/0 
 
algorithm returns ：
MCU returns time：2025-08-03 08:20:08 
MCUSDK ReceiveCount：0 
Effect return time：2025-08-03 07:35:01 
 return time：0001-01-01 00:00:00 
return count：0 
max begin_pos： 
real_batch sum：0 
 
ThreadPool：
Runing：181 , Available：190 ,I/O：200 

2025-08-03 08:35:37.268 [Thd =232]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:35:37.268 [Thd =232]  Info Default ChangeLightPath: False!
2025-08-03 08:35:37.269 [Thd =232]  Info Default SnakeScanLine: Paddle Rotate angle is 0 !
2025-08-03 08:35:39.365 [Thd =232]  Info Default InspectOverlayX: 16, InspectOverlayY:16
2025-08-03 08:35:39.377 [Thd =228]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:35:39.378 [Thd =232]  Info Default SetMaxPower:300
2025-08-03 08:35:40.379 [Thd =228]  Info Default 正在打开透射、反射光源，亮度 45%
2025-08-03 08:35:40.379 [Thd =232]  Info Default OpenLamp Transmission
2025-08-03 08:35:41.181 [Thd =206]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:35:44.001 [Thd =232]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:35:44.001 [Thd =232]  Info Default OpenLamp Reflection
2025-08-03 08:35:45.024 [Thd =217]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:35:45.807 [Thd =232]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:35:45.807 [Thd =207]  Info Default 正在启用实时聚焦
2025-08-03 08:35:46.218 [Thd =232]  Info MMSFocus _isStop = true 
2025-08-03 08:35:46.525 [Thd =217]  Error Default SyncSend recv cmd timeout
2025-08-03 08:35:48.749 [Thd =232]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:35:48.749 [Thd =249]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:35:49.717 [Thd =1]  Info Default VerifyModule.StopInspect() Stop !
2025-08-03 08:35:49.726 [Thd =1]  Info Default InspectProxy.Stop, InspectRuntimeInfo Thread health：
No memory resources：0001-01-01 00:00:00 
Excessive striping：0001-01-01 00:00:00 
 
Camera capture：
Camera capture received：2025-08-03 08:34:52 
no received resource：0001-01-01 00:00:00 
 
result handles thread health：
Result processing time：2025-08-03 08:35:49 
The number of images processed：0/0 
 
algorithm returns ：
MCU returns time：2025-08-03 08:20:08 
MCUSDK ReceiveCount：0 
Effect return time：2025-08-03 07:35:01 
 return time：0001-01-01 00:00:00 
return count：0 
max begin_pos： 
real_batch sum：0 
 
ThreadPool：
Runing：180 , Available：190 ,I/O：200 

2025-08-03 08:35:49.762 [Thd =249]  Info Default 正在设置扫描控制参数
2025-08-03 08:35:49.762 [Thd =232]  Info Default GetParameter: stepCompX is 0.000212456043166305
2025-08-03 08:35:50.567 [Thd =232]  Info Default Allocate resources!
2025-08-03 08:35:50.567 [Thd =232]  Info Default GPU num is 2!
2025-08-03 08:35:51.381 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Stopping
2025-08-03 08:35:51.383 [Thd =1]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 08:35:51.384 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 08:35:51.384 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Stopping
2025-08-03 08:35:51.384 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Stopping
2025-08-03 08:35:51.387 [Thd =1]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 08:35:51.387 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 08:35:51.388 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Stopping
2025-08-03 08:35:51.470 [Thd =233]  Info Default 结果处理全部完成！
2025-08-03 08:35:51.470 [Thd =29]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Stopped
2025-08-03 08:35:51.474 [Thd =29]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Stopped
2025-08-03 08:35:51.476 [Thd =29]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 08:35:51.477 [Thd =29]  Info Default SetSystemStatus Success
2025-08-03 08:35:51.513 [Thd =1]  Info Default AutoWorkerHelper.Stop() Abort() Complate 
2025-08-03 08:35:51.621 [Thd =232]  Error Default AutoWorkerHelpe:AutoInspecting: Scanning thread error!System.Threading.ThreadAbortException: 正在中止线程。
   在 System.Threading.Thread.SleepInternal(Int32 millisecondsTimeout)
   在 System.Threading.Thread.Sleep(Int32 millisecondsTimeout)
   在 VPATFLib.VPATF.OpenTrack()
   在 Storm.AutoFocus.VPMMSFocus.VPMMSFocus.Execute(String command) 位置 E:\software\Go-Agent-21.4.0\pipelines\Plugin4.0\AutoFocus Plugins\AutoFocus.VPMMSFocus\VPMMSFocus.cs:行号 336
   在 Storm.Command.Common.ComponentControlHelp.SetFocusTrack(Boolean IsOpen) 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\System Common\Storm.Command.Common\ControlCommand\ComponentControlHelp.cs:行号 416
   在 Storm.Defect.AutoWorkerHelper.SnakeScanLine() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\Storm.Common\Defect\Worker\AutoWorkerHelper.cs:行号 1454
   在 Storm.Defect.AutoWorkerHelper.AutoInspecting() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\Storm.Common\Defect\Worker\AutoWorkerHelper.cs:行号 812
2025-08-03 08:35:53.588 [Thd =29]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-08-03 08:35:53.588 [Thd =29]  Info Default *********Reset2**********
2025-08-03 08:35:53.588 [Thd =207]  Info Default 检测完成！
2025-08-03 08:35:53.588 [Thd =206]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 08:36:00.108 [Thd =206]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 08:36:03.651 [Thd =1]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:36:03.651 [Thd =1]  Info Default Stop End!
2025-08-03 08:36:03.651 [Thd =1]  Info Default release timer --begin
2025-08-03 08:36:04.651 [Thd =1]  Info Default release timer --end
2025-08-03 08:36:04.651 [Thd =206]  Warn Default 还原光源最大功率
2025-08-03 08:36:04.651 [Thd =245]  Info Default LaserLamp MaxPower:300
2025-08-03 08:36:04.773 [Thd =217]  Info MMSFocus _isStop = true 
2025-08-03 08:36:05.653 [Thd =245]  Info Default OpenLamp Transmission
2025-08-03 08:36:06.456 [Thd =161]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:36:06.656 [Thd =245]  Info Default CloseLamp Reflection
2025-08-03 08:36:07.682 [Thd =185]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:36:07.799 [Thd =217]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:36:07.799 [Thd =161]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:36:09.183 [Thd =185]  Error Default SyncSend recv cmd timeout
2025-08-03 08:36:09.801 [Thd =217]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:36:09.801 [Thd =214]  Info Default 聚焦Track已关闭
2025-08-03 08:36:16.662 [Thd =224]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:36:16.662 [Thd =224]  Error Default InitializeService: : ChangeLightPath to Area error
2025-08-03 08:36:16.676 [Thd =217]  Info Default Chuck vacuum close
2025-08-03 08:36:17.677 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:36:17.677 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:2947
2025-08-03 08:36:17.678 [Thd =233]  Info Default Chuck vacuum close
2025-08-03 08:36:18.679 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:36:18.679 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:2947
2025-08-03 08:36:18.680 [Thd =245]  Info Default Chuck vacuum close
2025-08-03 08:36:19.682 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:36:19.682 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopped! CurTaskName:2947
2025-08-03 08:36:19.682 [Thd =185]  Info Default Inspection Stop!
2025-08-03 08:36:20.497 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:36:53.819 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.Views.UCSetupMainMethodName:SelectProductSetup After Memory usage:28690.65MB VirtualMemorySize:200.3 GB
2025-08-03 08:37:01.684 [Thd =1]  Error Default SetProductSetup start
2025-08-03 08:37:01.740 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:37:01.740 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:37:04.651 [Thd =245]  Info MMSFocus _isStop = true 
2025-08-03 08:37:04.693 [Thd =245]  Info Default IKAP  Start of stream
2025-08-03 08:37:04.693 [Thd =245]  Info Default Preview Camera StartSnap
2025-08-03 08:37:04.733 [Thd =245]  Info Default IKAP End of stream
2025-08-03 08:37:04.733 [Thd =245]  Info Default Preview Camera StopSnap
2025-08-03 08:37:04.775 [Thd =245]  Info Default IKAP  Start of stream
2025-08-03 08:37:04.776 [Thd =245]  Info Default Preview Camera StartSnap
2025-08-03 08:37:04.780 [Thd =245]  Info Default camera_line StartTrigger
2025-08-03 08:37:25.194 [Thd =245]  Info Default m_focusMapMode：0
2025-08-03 08:37:25.196 [Thd =245]  Info Default Axis Y:5,PulseWidth:0.002,TriggerDistance:0.082975679542,BeginPoint:-175,EndPoint:0
2025-08-03 08:37:35.422 [Thd =245]  Info Default IKAP End of stream
2025-08-03 08:37:35.422 [Thd =245]  Info Default Preview Camera StopSnap
2025-08-03 08:37:36.119 [Thd =245]  Info Default RefLamp Rise: True!
2025-08-03 08:37:40.365 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:37:40.365 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:37:45.094 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:37:45.094 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:37:52.977 [Thd =228]  Info Default Chuck vacuum close
2025-08-03 08:37:53.978 [Thd =233]  Info Default ChuckVac: :False
2025-08-03 08:37:56.832 [Thd =1]  Info Default GetMarkPos  offsetX:745,offsety:341
2025-08-03 08:38:01.610 [Thd =1]  Info Default GetMarkPos  offsetX:612,offsety:512
2025-08-03 08:38:03.685 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:38:03.686 [Thd =251]  Info Default Chuck vacuum close
2025-08-03 08:38:04.687 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:38:14.920 [Thd =245]  Info Default Chuck vacuum close
2025-08-03 08:38:15.921 [Thd =214]  Info Default ChuckVac: :False
2025-08-03 08:38:29.630 [Thd =1]  Info Default GetMarkPos  offsetX:999,offsety:326
2025-08-03 08:38:39.398 [Thd =1]  Info Default GetMarkPos  offsetX:613,offsety:511
2025-08-03 08:38:42.125 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:38:42.126 [Thd =228]  Info Default Chuck vacuum close
2025-08-03 08:38:43.127 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:38:54.057 [Thd =188]  Info Default Chuck vacuum close
2025-08-03 08:38:55.057 [Thd =251]  Info Default ChuckVac: :False
2025-08-03 08:39:12.203 [Thd =1]  Info Default GetMarkPos  offsetX:430,offsety:332
2025-08-03 08:39:15.711 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:39:15.711 [Thd =251]  Info Default Chuck vacuum close
2025-08-03 08:39:16.713 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:39:21.605 [Thd =245]  Info Default Alignment ...
2025-08-03 08:39:21.725 [Thd =228]  Info Default Chuck vacuum close
2025-08-03 08:39:22.727 [Thd =207]  Info Default ChuckVac: :False
2025-08-03 08:39:32.395 [Thd =187]  Info Default Switch light...
2025-08-03 08:39:32.395 [Thd =207]  Info Default OpenLamp Transmission
2025-08-03 08:39:33.198 [Thd =233]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:39:36.008 [Thd =207]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:39:36.509 [Thd =207]  Info Default CloseLamp Reflection
2025-08-03 08:39:38.335 [Thd =207]  Info MMSFocus _isStop = true 
2025-08-03 08:39:38.335 [Thd =231]  Info Default Execute alignment 1/2
2025-08-03 08:39:43.491 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9988929,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:39:43.491 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 08:39:43.491 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 08:39:43.614 [Thd =207]  Info Default Flag:Fine1, Position:62.22387805684,73.19779984468
2025-08-03 08:39:53.328 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9999019,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:39:53.328 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 08:39:53.328 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 08:39:53.451 [Thd =207]  Info Default Flag:Fine2, Position:-62.17571784352,72.87069542548
2025-08-03 08:40:03.791 [Thd =228]  Info Default Execute alignment 2/2
2025-08-03 08:40:13.105 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9957808,xOffSet:583,yOffSet:521,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:40:13.106 [Thd =207]  Info Default D2DMatchMark ******** :errorX:-29,errorY:9
2025-08-03 08:40:14.747 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9976923,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:40:14.748 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 08:40:14.870 [Thd =207]  Info Default Flag:Fine1, Position:62.0435113659071,72.6740561322657
2025-08-03 08:40:24.581 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9972658,xOffSet:597,yOffSet:521,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:40:24.581 [Thd =207]  Info Default D2DMatchMark ******** :errorX:-15,errorY:9
2025-08-03 08:40:26.208 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9978918,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:40:26.208 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 08:40:26.331 [Thd =207]  Info Default Flag:Fine2, Position:-62.3565145885674,72.6699755625142
2025-08-03 08:40:29.252 [Thd =217]  Info Default Checking Mark ...
2025-08-03 08:40:38.590 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9969412,xOffSet:614,yOffSet:513,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:40:38.590 [Thd =207]  Info Default D2DMatchMark ******** :errorX:2,errorY:1
2025-08-03 08:40:40.195 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9969364,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:40:40.195 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 08:40:40.318 [Thd =207]  Info Default Flag:Fine1, Position:62.0409939579424,72.6668312399436
2025-08-03 08:40:50.018 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9979397,xOffSet:612,yOffSet:513,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:40:50.018 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:1
2025-08-03 08:40:50.018 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:1,Successed:True
2025-08-03 08:40:50.142 [Thd =207]  Info Default Flag:Fine2, Position:-62.3587405134175,72.6674143400258
2025-08-03 08:41:00.544 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9966258,xOffSet:614,yOffSet:495,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:41:00.544 [Thd =207]  Info Default D2DMatchMark ******** :errorX:2,errorY:-17
2025-08-03 08:41:02.171 [Thd =207]  Info Default D2DSearchMark matchResult:0， score:0.9978837,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 08:41:02.172 [Thd =207]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 08:41:02.296 [Thd =207]  Info Default Flag:Fine3, Position:-62.3537841627375,-68.7333492092542
2025-08-03 08:41:03.297 [Thd =207]  Info Default IsAlignAngleOK fine1:62.0409939579424,72.6668312399436,fine2:-62.3587405134175,72.6674143400258
2025-08-03 08:41:03.297 [Thd =187]  Info Default Height difference : 0.20 um 
2025-08-03 08:41:03.297 [Thd =207]  Info Default IsAlignAngleOK delta:-0.00200000000748219.
2025-08-03 08:41:21.572 [Thd =207]  Info MMSFocus _isStop = true 
2025-08-03 08:41:21.572 [Thd =251]  Info Default Alignment finish 
2025-08-03 08:41:21.572 [Thd =214]  Info Default Chuck vacuum open
2025-08-03 08:41:22.572 [Thd =207]  Info Default ChuckVac: :True
2025-08-03 08:41:23.501 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:41:48.767 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 08:41:56.567 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 08:41:58.708 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 08:42:01.713 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:09.686 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:09.698 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:09.698 [Thd =1]  Info Default MaskScaleY:1.00000213447915
2025-08-03 08:42:09.698 [Thd =1]  Info Default MaskScaleX:0.999994600104972,Orth_Y_BeforR:0.120499197605735
2025-08-03 08:42:09.699 [Thd =231]  Info Default located_pos:(62.0409939579424, 72.6668312399436)
2025-08-03 08:42:09.699 [Thd =231]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:42:09.699 [Thd =231]  Info Default MoveStageForMarkCol102 point (-62.3587405134175, 72.6668312399436), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:09.699 [Thd =231]  Info Default located_pos:(-62.3587405134175, 72.6668312399436)
2025-08-03 08:42:09.699 [Thd =231]  Info Default deltax_stage 141.40076354928, deltay_stage:0.
2025-08-03 08:42:09.699 [Thd =231]  Info Default MoveStageForMarkCol101 point (62.0459503086255, -68.7339323962009), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:09.700 [Thd =231]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:42:09.700 [Thd =231]  Info Default MoveStageForMarkCol102 point (-62.3537841627344, -68.7339323962009), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0459503086255, -68.7339323962009).
2025-08-03 08:42:09.700 [Thd =231]  Info Default located_pos:(-62.3537841627344, -68.7339323962009)
2025-08-03 08:42:09.700 [Thd =231]  Info Default AliPt:(62.0409939579424, 72.6668312399436), GDS2StagePt:(62.0409939579424, 72.6668312399436), XOffset:5, YOffset:5
2025-08-03 08:42:09.700 [Thd =231]  Info Default AliPt:(-62.3587405134175, 72.6674143400258), GDS2StagePt:(-62.3587405134175, 72.6668312399436), XOffset:5, YOffset:5
2025-08-03 08:42:09.700 [Thd =231]  Info Default AliPt:(-62.3537841627375, -68.7333492092542), GDS2StagePt:(-62.3537841627344, -68.7339323962009), XOffset:5, YOffset:5
2025-08-03 08:42:09.710 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:09.710 [Thd =1]  Info Default MaskScaleY:1.00000213447915
2025-08-03 08:42:09.710 [Thd =1]  Info Default MaskScaleX:0.999994600104972,Orth_Y_BeforR:0.120499197605735
2025-08-03 08:42:09.710 [Thd =1]  Info Default deltax_stage 14.9114545202891, deltay_stage:0.
2025-08-03 08:42:09.710 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0415166312006, 57.7553767104942), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:09.710 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59979777839006.
2025-08-03 08:42:09.710 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6413144095907, 57.7553767104942), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0415166312006, 57.7553767104942).
2025-08-03 08:42:09.710 [Thd =1]  Info Default located_pos:(69.6413144095907, 57.7553767104942)
2025-08-03 08:42:09.711 [Thd =1]  Info Default deltax_stage 126.458755864007, deltay_stage:0.
2025-08-03 08:42:09.711 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.045426564424, -53.7919247017487), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:09.711 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.986101278418.
2025-08-03 08:42:09.711 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9406747139941, -53.7919247017487), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.045426564424, -53.7919247017487).
2025-08-03 08:42:09.711 [Thd =1]  Info Default located_pos:(-69.9406747139941, -53.7919247017487)
2025-08-03 08:42:26.592 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:26.786 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:53.104 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:53.104 [Thd =1]  Info Default MaskScaleY:1.00000213447915
2025-08-03 08:42:53.104 [Thd =1]  Info Default MaskScaleX:0.999994600104972,Orth_Y_BeforR:0.120499197605735
2025-08-03 08:42:57.503 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:57.589 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:57.590 [Thd =1]  Info Default MaskScaleY:1.00000213447915
2025-08-03 08:42:57.590 [Thd =1]  Info Default MaskScaleX:0.999994600104972,Orth_Y_BeforR:0.120499197605735
2025-08-03 08:42:57.590 [Thd =246]  Info Default located_pos:(62.0409939579424, 72.6668312399436)
2025-08-03 08:42:57.590 [Thd =246]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:42:57.590 [Thd =246]  Info Default MoveStageForMarkCol102 point (-62.3587405134175, 72.6668312399436), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:57.590 [Thd =246]  Info Default located_pos:(-62.3587405134175, 72.6668312399436)
2025-08-03 08:42:57.590 [Thd =246]  Info Default deltax_stage 141.40076354928, deltay_stage:0.
2025-08-03 08:42:57.590 [Thd =246]  Info Default MoveStageForMarkCol101 point (62.0459503086255, -68.7339323962009), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:57.591 [Thd =246]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:42:57.591 [Thd =246]  Info Default MoveStageForMarkCol102 point (-62.3537841627344, -68.7339323962009), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0459503086255, -68.7339323962009).
2025-08-03 08:42:57.591 [Thd =246]  Info Default located_pos:(-62.3537841627344, -68.7339323962009)
2025-08-03 08:42:57.591 [Thd =246]  Info Default AliPt:(62.0409939579424, 72.6668312399436), GDS2StagePt:(62.0409939579424, 72.6668312399436), XOffset:5, YOffset:5
2025-08-03 08:42:57.591 [Thd =246]  Info Default AliPt:(-62.3587405134175, 72.6674143400258), GDS2StagePt:(-62.3587405134175, 72.6668312399436), XOffset:5, YOffset:5
2025-08-03 08:42:57.591 [Thd =246]  Info Default AliPt:(-62.3537841627375, -68.7333492092542), GDS2StagePt:(-62.3537841627344, -68.7339323962009), XOffset:5, YOffset:5
2025-08-03 08:42:57.599 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:42:57.600 [Thd =1]  Info Default MaskScaleY:1.00000213447915
2025-08-03 08:42:57.600 [Thd =1]  Info Default MaskScaleX:0.999994600104972,Orth_Y_BeforR:0.120499197605735
2025-08-03 08:42:57.600 [Thd =1]  Info Default deltax_stage 14.9114545202891, deltay_stage:0.
2025-08-03 08:42:57.600 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0415166312006, 57.7553767104942), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:57.600 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59979777839006.
2025-08-03 08:42:57.600 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6413144095907, 57.7553767104942), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0415166312006, 57.7553767104942).
2025-08-03 08:42:57.600 [Thd =1]  Info Default located_pos:(69.6413144095907, 57.7553767104942)
2025-08-03 08:42:57.600 [Thd =1]  Info Default deltax_stage 126.458755864007, deltay_stage:0.
2025-08-03 08:42:57.601 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.045426564424, -53.7919247017487), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:42:57.601 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.986101278418.
2025-08-03 08:42:57.601 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9406747139941, -53.7919247017487), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.045426564424, -53.7919247017487).
2025-08-03 08:42:57.601 [Thd =1]  Info Default located_pos:(-69.9406747139941, -53.7919247017487)
2025-08-03 08:43:05.704 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:43:05.930 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:43:54.062 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:28823.89MB VirtualMemorySize:200.4 GB
2025-08-03 08:43:54.187 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:43:54.187 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:43:54.269 [Thd =206]  Info Default 设置光标定环境中，请等待......
2025-08-03 08:43:54.269 [Thd =217]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 08:43:54.270 [Thd =217]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:43:54.270 [Thd =217]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:43:54.272 [Thd =217]  Info Default SetDistortionPara disaabled
2025-08-03 08:43:55.245 [Thd =217]  Info MMSFocus _isStop = true 
2025-08-03 08:43:55.245 [Thd =217]  Info Default aSwitchIndex index:0
2025-08-03 08:43:55.245 [Thd =217]  Info Default lens from ATF:
2025-08-03 08:43:55.245 [Thd =217]  Info Default objCount:3
2025-08-03 08:43:55.245 [Thd =217]  Info Default ratio:P200;objId:0
2025-08-03 08:43:55.245 [Thd =217]  Info Default ratio:P140;objId:1
2025-08-03 08:43:55.245 [Thd =217]  Info Default ratio:P100;objId:2
2025-08-03 08:43:55.245 [Thd =217]  Info Default ratio:;objId:0
2025-08-03 08:43:55.245 [Thd =217]  Info Default ratio:;objId:0
2025-08-03 08:43:55.246 [Thd =217]  Info Default ratio:;objId:0
2025-08-03 08:43:55.246 [Thd =217]  Info Default ratio:;objId:0
2025-08-03 08:43:55.246 [Thd =217]  Info Default ratio:;objId:0
2025-08-03 08:43:55.246 [Thd =217]  Info Default lens from system settings:
2025-08-03 08:43:55.246 [Thd =217]  Info Default systemlensettings lens count:3
2025-08-03 08:43:55.246 [Thd =217]  Info Default ratio:P200;objId:0
2025-08-03 08:43:55.246 [Thd =217]  Info Default ratio:P140;objId:1
2025-08-03 08:43:55.246 [Thd =217]  Info Default ratio:P100;objId:2
2025-08-03 08:43:55.248 [Thd =217]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:43:55.282 [Thd =217]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:43:55.284 [Thd =217]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:43:55.284 [Thd =217]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:43:55.285 [Thd =217]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:43:55.285 [Thd =217]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:43:55.285 [Thd =217]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:43:55.285 [Thd =217]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:43:55.285 [Thd =217]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:43:55.285 [Thd =217]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:43:55.543 [Thd =217]  Info strip vectorBegin:(6.455385,7.291719),VectorEnd:(1.150058,7.291719),CaptureBegin:(4.455385,7.291719)，CaptureEnd：(3.150058,7.291719),StepScan:0.435108959268996
2025-08-03 08:43:55.543 [Thd =217]  Info Default VectorBegin:(6.45538468029395,7.29171924437096)
2025-08-03 08:43:56.777 [Thd =161]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:43:56.777 [Thd =217]  Info Default SetMaxPower:300
2025-08-03 08:43:57.778 [Thd =206]  Info Default 打开光源，亮度：42%
2025-08-03 08:43:57.778 [Thd =245]  Info Default OpenLamp Transmission
2025-08-03 08:43:57.812 [Thd =230]  Info Default LaserLamp MaxPower:300,currentPower:126
2025-08-03 08:43:58.582 [Thd =246]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:43:59.314 [Thd =230]  Error Default SyncSend recv cmd timeout
2025-08-03 08:43:59.789 [Thd =217]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:43:59.789 [Thd =228]  Info Default 聚焦Track已关闭
2025-08-03 08:44:01.265 [Thd =217]  Info MMSFocus _isStop = true 
2025-08-03 08:44:01.402 [Thd =245]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:44:01.411 [Thd =245]  Info Default OpenLamp Reflection
2025-08-03 08:44:02.768 [Thd =217]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:44:02.768 [Thd =251]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:44:03.217 [Thd =245]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:44:05.780 [Thd =217]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:44:05.780 [Thd =243]  Info Default 聚焦Track已开启
2025-08-03 08:44:09.795 [Thd =231]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:44:09.795 [Thd =231]  Info Default ChangeLightPath: False!
2025-08-03 08:44:09.795 [Thd =245]  Info Default 标定中，请等待......
2025-08-03 08:44:09.795 [Thd =243]  Info Default CurrentSize:2048,2048
2025-08-03 08:44:09.795 [Thd =243]  Info Default Camera size no change
2025-08-03 08:44:09.795 [Thd =214]  Info Default CurrentSize:2048,2048
2025-08-03 08:44:09.795 [Thd =214]  Info Default Camera size no change
2025-08-03 08:44:09.797 [Thd =243]  Info Default Set camera size success
2025-08-03 08:44:09.797 [Thd =243]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:44:09.797 [Thd =214]  Info Default Set camera size success
2025-08-03 08:44:09.797 [Thd =214]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:44:11.248 [Thd =243]  Info Default Set camera parameter
2025-08-03 08:44:11.248 [Thd =243]  Info Default TriggerMode is On,dont set
2025-08-03 08:44:11.248 [Thd =243]  Info Default BUFFER_COUNT no change
2025-08-03 08:44:11.751 [Thd =214]  Info Default Set camera parameter
2025-08-03 08:44:11.752 [Thd =214]  Info Default TriggerMode is On,dont set
2025-08-03 08:44:11.752 [Thd =214]  Info Default BUFFER_COUNT no change
2025-08-03 08:44:11.780 [Thd =217]  Info Default scanStrips:1,LampResult:42
2025-08-03 08:44:11.780 [Thd =217]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 08:44:11.780 [Thd =217]  Info Default strip.VectorBegin.X:6.45538468029395,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:11.822 [Thd =217]  Info Default m_focusMapMode：0
2025-08-03 08:44:11.823 [Thd =217]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.45538468029395,EndPoint:-3.15005780248696
2025-08-03 08:44:11.823 [Thd =217]  Info Default strip.VectorBegin.X:1.15005780248696,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:12.036 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:12.040 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:12.904 [Thd =217]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 08:44:12.904 [Thd =217]  Info Default strip.VectorBegin.X:6.45538468029395,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:12.937 [Thd =206]  Info Default LaserLamp MaxPower:300,currentPower:123
2025-08-03 08:44:13.319 [Thd =217]  Info Default m_focusMapMode：0
2025-08-03 08:44:13.321 [Thd =217]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.45538468029395,EndPoint:-3.15005780248696
2025-08-03 08:44:13.321 [Thd =217]  Info Default strip.VectorBegin.X:1.15005780248696,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:13.536 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:13.538 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:14.387 [Thd =217]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 08:44:14.387 [Thd =217]  Info Default strip.VectorBegin.X:6.45538468029395,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:14.439 [Thd =206]  Error Default SyncSend recv cmd timeout
2025-08-03 08:44:14.455 [Thd =246]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-08-03 08:44:14.814 [Thd =217]  Info Default m_focusMapMode：0
2025-08-03 08:44:14.817 [Thd =217]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.45538468029395,EndPoint:-3.15005780248696
2025-08-03 08:44:14.817 [Thd =217]  Info Default strip.VectorBegin.X:1.15005780248696,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:15.034 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:15.037 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:15.890 [Thd =217]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 08:44:15.926 [Thd =217]  Info Default AutoLightReturn:48,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 08:44:15.926 [Thd =217]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 08:44:15.926 [Thd =217]  Info Default strip.VectorBegin.X:6.45538468029395,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:15.956 [Thd =246]  Error Default SyncSend recv cmd timeout
2025-08-03 08:44:15.995 [Thd =228]  Info Default LaserLamp MaxPower:300,currentPower:144
2025-08-03 08:44:16.345 [Thd =217]  Info Default m_focusMapMode：0
2025-08-03 08:44:16.348 [Thd =217]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.45538468029395,EndPoint:-3.15005780248696
2025-08-03 08:44:16.348 [Thd =217]  Info Default strip.VectorBegin.X:1.15005780248696,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:16.561 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:16.563 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:17.413 [Thd =217]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 08:44:17.413 [Thd =217]  Info Default strip.VectorBegin.X:6.45538468029395,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:17.496 [Thd =228]  Error Default SyncSend recv cmd timeout
2025-08-03 08:44:17.532 [Thd =187]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 08:44:17.833 [Thd =217]  Info Default m_focusMapMode：0
2025-08-03 08:44:17.834 [Thd =217]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.45538468029395,EndPoint:-3.15005780248696
2025-08-03 08:44:17.835 [Thd =217]  Info Default strip.VectorBegin.X:1.15005780248696,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:18.046 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:18.049 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:18.898 [Thd =217]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 08:44:18.898 [Thd =217]  Info Default strip.VectorBegin.X:6.45538468029395,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:19.033 [Thd =187]  Error Default SyncSend recv cmd timeout
2025-08-03 08:44:19.065 [Thd =188]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:44:19.316 [Thd =217]  Info Default m_focusMapMode：0
2025-08-03 08:44:19.319 [Thd =217]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.45538468029395,EndPoint:-3.15005780248696
2025-08-03 08:44:19.319 [Thd =217]  Info Default strip.VectorBegin.X:1.15005780248696,strip.VectorBegin.Y:7.29171924437096
2025-08-03 08:44:19.537 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:19.540 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:20.398 [Thd =217]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 08:44:20.436 [Thd =217]  Info Default AutoLightReturn:46,trans_result:0,ref_result:4，stripsIndex：0,scanStrips.Count:1
2025-08-03 08:44:20.436 [Thd =217]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:20.436 [Thd =217]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:20.436 [Thd =217]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:20.436 [Thd =217]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:20.567 [Thd =188]  Error Default SyncSend recv cmd timeout
2025-08-03 08:44:20.638 [Thd =217]  Info Default Light Complete 5,ResultMessge:结果:46,下调反射光台阶数
2025-08-03 08:44:20.686 [Thd =217]  Warn Default 还原光源最大功率
2025-08-03 08:44:20.686 [Thd =161]  Info Default LaserLamp MaxPower:300
2025-08-03 08:44:21.687 [Thd =207]  Info Default OpenLamp Transmission
2025-08-03 08:44:21.794 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 08:44:22.499 [Thd =188]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:44:23.503 [Thd =207]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:44:23.503 [Thd =207]  Info Default CloseLamp Reflection
2025-08-03 08:44:24.305 [Thd =187]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:44:24.305 [Thd =233]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:44:24.534 [Thd =207]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:44:26.035 [Thd =207]  Error Default SyncSend recv cmd timeout
2025-08-03 08:44:26.307 [Thd =187]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:44:26.307 [Thd =207]  Info Default 聚焦Track已关闭
2025-08-03 08:44:33.717 [Thd =246]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:44:33.755 [Thd =161]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:28447.22MB VirtualMemorySize:200.4 GB
2025-08-03 08:44:59.647 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:28468.25MB VirtualMemorySize:200.4 GB
2025-08-03 08:44:59.772 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:44:59.772 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:44:59.819 [Thd =224]  Info Default 设置光标定环境中，请等待......
2025-08-03 08:44:59.820 [Thd =214]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 08:44:59.820 [Thd =214]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:59.820 [Thd =214]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:44:59.825 [Thd =214]  Info Default SetDistortionPara disaabled
2025-08-03 08:45:00.750 [Thd =214]  Info MMSFocus _isStop = true 
2025-08-03 08:45:00.750 [Thd =214]  Info Default aSwitchIndex index:0
2025-08-03 08:45:00.750 [Thd =214]  Info Default lens from ATF:
2025-08-03 08:45:00.750 [Thd =214]  Info Default objCount:3
2025-08-03 08:45:00.750 [Thd =214]  Info Default ratio:P200;objId:0
2025-08-03 08:45:00.750 [Thd =214]  Info Default ratio:P140;objId:1
2025-08-03 08:45:00.750 [Thd =214]  Info Default ratio:P100;objId:2
2025-08-03 08:45:00.750 [Thd =214]  Info Default ratio:;objId:0
2025-08-03 08:45:00.750 [Thd =214]  Info Default ratio:;objId:0
2025-08-03 08:45:00.751 [Thd =214]  Info Default ratio:;objId:0
2025-08-03 08:45:00.751 [Thd =214]  Info Default ratio:;objId:0
2025-08-03 08:45:00.751 [Thd =214]  Info Default ratio:;objId:0
2025-08-03 08:45:00.751 [Thd =214]  Info Default lens from system settings:
2025-08-03 08:45:00.751 [Thd =214]  Info Default systemlensettings lens count:3
2025-08-03 08:45:00.751 [Thd =214]  Info Default ratio:P200;objId:0
2025-08-03 08:45:00.751 [Thd =214]  Info Default ratio:P140;objId:1
2025-08-03 08:45:00.751 [Thd =214]  Info Default ratio:P100;objId:2
2025-08-03 08:45:00.753 [Thd =214]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:45:00.785 [Thd =214]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:45:00.789 [Thd =214]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:45:00.789 [Thd =214]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:45:00.789 [Thd =214]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:45:00.789 [Thd =214]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:45:00.789 [Thd =214]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:45:00.790 [Thd =214]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:45:00.790 [Thd =214]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:45:00.804 [Thd =214]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:45:01.052 [Thd =214]  Info strip vectorBegin:(6.407279,7.275392),VectorEnd:(1.101952,7.275392),CaptureBegin:(4.407279,7.275392)，CaptureEnd：(3.101952,7.275392),StepScan:0.435108959268996
2025-08-03 08:45:01.052 [Thd =214]  Info Default VectorBegin:(6.40727892429395,7.27539244137096)
2025-08-03 08:45:02.278 [Thd =185]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:45:02.278 [Thd =214]  Info Default SetMaxPower:300
2025-08-03 08:45:03.280 [Thd =224]  Info Default 打开光源，亮度：46%
2025-08-03 08:45:03.280 [Thd =206]  Info Default OpenLamp Transmission
2025-08-03 08:45:03.306 [Thd =217]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:45:04.084 [Thd =161]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:45:04.807 [Thd =217]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:05.280 [Thd =214]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:45:05.280 [Thd =243]  Info Default 聚焦Track已关闭
2025-08-03 08:45:06.758 [Thd =214]  Info MMSFocus _isStop = true 
2025-08-03 08:45:06.895 [Thd =206]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:45:06.895 [Thd =206]  Info Default OpenLamp Reflection
2025-08-03 08:45:08.262 [Thd =214]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:45:08.262 [Thd =187]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:45:08.701 [Thd =206]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:45:11.264 [Thd =214]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:45:11.264 [Thd =230]  Info Default 聚焦Track已开启
2025-08-03 08:45:15.310 [Thd =246]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:45:15.310 [Thd =246]  Info Default ChangeLightPath: False!
2025-08-03 08:45:15.310 [Thd =224]  Info Default 标定中，请等待......
2025-08-03 08:45:15.310 [Thd =231]  Info Default CurrentSize:2048,2048
2025-08-03 08:45:15.310 [Thd =231]  Info Default Camera size no change
2025-08-03 08:45:15.310 [Thd =185]  Info Default CurrentSize:2048,2048
2025-08-03 08:45:15.310 [Thd =185]  Info Default Camera size no change
2025-08-03 08:45:15.311 [Thd =231]  Info Default Set camera size success
2025-08-03 08:45:15.311 [Thd =231]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:45:15.311 [Thd =185]  Info Default Set camera size success
2025-08-03 08:45:15.311 [Thd =185]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:45:16.763 [Thd =231]  Info Default Set camera parameter
2025-08-03 08:45:16.763 [Thd =231]  Info Default TriggerMode is On,dont set
2025-08-03 08:45:16.763 [Thd =231]  Info Default BUFFER_COUNT no change
2025-08-03 08:45:17.266 [Thd =185]  Info Default Set camera parameter
2025-08-03 08:45:17.267 [Thd =185]  Info Default TriggerMode is On,dont set
2025-08-03 08:45:17.267 [Thd =185]  Info Default BUFFER_COUNT no change
2025-08-03 08:45:17.272 [Thd =214]  Info Default scanStrips:1,LampResult:46
2025-08-03 08:45:17.272 [Thd =214]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 08:45:17.272 [Thd =214]  Info Default strip.VectorBegin.X:6.40727892429395,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:17.311 [Thd =214]  Info Default m_focusMapMode：0
2025-08-03 08:45:17.313 [Thd =214]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:45:17.313 [Thd =214]  Info Default strip.VectorBegin.X:1.10195204648696,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:17.526 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:17.530 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:18.380 [Thd =214]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 08:45:18.380 [Thd =214]  Info Default strip.VectorBegin.X:6.40727892429395,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:18.405 [Thd =228]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:45:18.799 [Thd =214]  Info Default m_focusMapMode：0
2025-08-03 08:45:18.801 [Thd =214]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:45:18.801 [Thd =214]  Info Default strip.VectorBegin.X:1.10195204648696,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:19.029 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:19.030 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:19.883 [Thd =214]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 08:45:19.883 [Thd =214]  Info Default strip.VectorBegin.X:6.40727892429395,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:19.906 [Thd =228]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:19.922 [Thd =245]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 08:45:20.302 [Thd =214]  Info Default m_focusMapMode：0
2025-08-03 08:45:20.303 [Thd =214]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:45:20.303 [Thd =214]  Info Default strip.VectorBegin.X:1.10195204648696,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:20.516 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:20.518 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:21.376 [Thd =214]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 08:45:21.423 [Thd =245]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:21.423 [Thd =214]  Info Default AutoLightReturn:48,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 08:45:21.423 [Thd =214]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 08:45:21.423 [Thd =214]  Info Default strip.VectorBegin.X:6.40727892429395,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:21.466 [Thd =246]  Info Default LaserLamp MaxPower:300,currentPower:144
2025-08-03 08:45:21.844 [Thd =214]  Info Default m_focusMapMode：0
2025-08-03 08:45:21.846 [Thd =214]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:45:21.846 [Thd =214]  Info Default strip.VectorBegin.X:1.10195204648696,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:22.058 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:22.062 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:22.913 [Thd =214]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 08:45:22.913 [Thd =214]  Info Default strip.VectorBegin.X:6.40727892429395,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:22.967 [Thd =246]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:23.000 [Thd =206]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 08:45:23.327 [Thd =214]  Info Default m_focusMapMode：0
2025-08-03 08:45:23.330 [Thd =214]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:45:23.330 [Thd =214]  Info Default strip.VectorBegin.X:1.10195204648696,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:23.559 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:23.561 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:24.402 [Thd =214]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 08:45:24.402 [Thd =214]  Info Default strip.VectorBegin.X:6.40727892429395,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:24.501 [Thd =206]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:24.517 [Thd =245]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:45:24.817 [Thd =214]  Info Default m_focusMapMode：0
2025-08-03 08:45:24.818 [Thd =214]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:45:24.818 [Thd =214]  Info Default strip.VectorBegin.X:1.10195204648696,strip.VectorBegin.Y:7.27539244137096
2025-08-03 08:45:25.032 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:25.034 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:25.893 [Thd =214]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 08:45:25.940 [Thd =214]  Info Default AutoLightReturn:46,trans_result:0,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 08:45:25.940 [Thd =214]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:25.940 [Thd =214]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:25.941 [Thd =214]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:25.941 [Thd =214]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\OpticalCalibration
2025-08-03 08:45:26.018 [Thd =245]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:26.143 [Thd =214]  Info Default Light Complete 5,ResultMessge:结果:46
2025-08-03 08:45:26.188 [Thd =230]  Warn Default 还原光源最大功率
2025-08-03 08:45:26.188 [Thd =161]  Info Default LaserLamp MaxPower:300
2025-08-03 08:45:27.190 [Thd =207]  Info Default OpenLamp Transmission
2025-08-03 08:45:27.316 [Thd =230]  Info MMSFocus _isStop = true 
2025-08-03 08:45:27.993 [Thd =206]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:45:28.996 [Thd =207]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:45:28.996 [Thd =207]  Info Default CloseLamp Reflection
2025-08-03 08:45:29.822 [Thd =230]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:45:29.822 [Thd =251]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:45:30.028 [Thd =228]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:45:31.529 [Thd =228]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:31.823 [Thd =230]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:45:31.823 [Thd =251]  Info Default 聚焦Track已关闭
2025-08-03 08:45:39.204 [Thd =245]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:45:39.242 [Thd =161]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:28477.45MB VirtualMemorySize:200.5 GB
2025-08-03 08:45:39.247 [Thd =185]  Info Default 光标定完成！
2025-08-03 08:45:43.737 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 08:45:43.846 [Thd =1]  Info Default ModuleBaseControl_Loaded：WaferStagePoint:3.74779806002495,7.42471062937096,,,AFCalibrationPoint:,
2025-08-03 08:45:45.118 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:Make0Calibration Before Memory usage:28481.29MB VirtualMemorySize:200.5 GB
2025-08-03 08:45:45.134 [Thd =187]  Info Default LineCameraStage:25
2025-08-03 08:45:45.135 [Thd =231]  Info Default CurrentSize:2048,2048
2025-08-03 08:45:45.135 [Thd =231]  Info Default Camera size no change
2025-08-03 08:45:45.135 [Thd =217]  Info Default CurrentSize:2048,2048
2025-08-03 08:45:45.135 [Thd =217]  Info Default Camera size no change
2025-08-03 08:45:45.136 [Thd =231]  Info Default Set camera size success
2025-08-03 08:45:45.136 [Thd =231]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:45:45.136 [Thd =217]  Info Default Set camera size success
2025-08-03 08:45:45.137 [Thd =217]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:45:46.587 [Thd =231]  Info Default Set camera parameter
2025-08-03 08:45:46.588 [Thd =231]  Info Default TriggerMode is On,dont set
2025-08-03 08:45:46.588 [Thd =231]  Info Default BUFFER_COUNT no change
2025-08-03 08:45:47.092 [Thd =217]  Info Default Set camera parameter
2025-08-03 08:45:47.092 [Thd =217]  Info Default TriggerMode is On,dont set
2025-08-03 08:45:47.092 [Thd =217]  Info Default BUFFER_COUNT no change
2025-08-03 08:45:47.101 [Thd =187]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:45:47.101 [Thd =187]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:45:47.102 [Thd =187]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:45:47.102 [Thd =187]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:45:47.102 [Thd =187]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:45:47.102 [Thd =187]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:45:47.102 [Thd =187]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:45:47.102 [Thd =187]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:45:47.346 [Thd =187]  Info strip vectorBegin:(6.407279,7.275392),VectorEnd:(1.101952,7.275392),CaptureBegin:(4.407279,7.275392)，CaptureEnd：(3.101952,7.275392),StepScan:0.435108959268996
2025-08-03 08:45:47.347 [Thd =187]  Info Default Calibreation AreaToLinePoint:(3.97216996502495,7.27539244137096)
2025-08-03 08:45:47.347 [Thd =231]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:45:47.347 [Thd =187]  Info Default SetMaxPower:300
2025-08-03 08:45:48.348 [Thd =231]  Info Default 打开光源，亮度：46%
2025-08-03 08:45:48.348 [Thd =207]  Info Default OpenLamp Transmission
2025-08-03 08:45:48.381 [Thd =230]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:45:49.152 [Thd =233]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:45:49.883 [Thd =230]  Error Default SyncSend recv cmd timeout
2025-08-03 08:45:50.217 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 08:45:51.724 [Thd =187]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:45:51.724 [Thd =246]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:45:51.965 [Thd =207]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:45:51.965 [Thd =207]  Info Default OpenLamp Reflection
2025-08-03 08:45:53.772 [Thd =207]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:46:00.373 [Thd =161]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:46:00.373 [Thd =161]  Info Default ChangeLightPath: False!
2025-08-03 08:46:00.373 [Thd =224]  Info Default 设置Make0标定环境中,请等待......
2025-08-03 08:46:00.373 [Thd =207]  Info Default 标定中，请稍等......
2025-08-03 08:46:02.377 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 08:46:03.499 [Thd =224]  Warn Default Optimum:1.000um
2025-08-03 08:46:06.177 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:06.179 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:07.394 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:07.396 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:08.614 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:08.617 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:09.830 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:09.832 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:11.045 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:11.048 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:12.275 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:12.278 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:13.504 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:13.506 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:14.715 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:14.717 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:15.918 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:15.920 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:17.155 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:17.157 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:18.359 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:46:18.360 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:-4.40727892429395,EndPoint:-3.10195204648696
2025-08-03 08:46:18.926 [Thd =187]  Info Default FitPosition:1.38364890363244,score:46.0990154828703
2025-08-03 08:46:18.926 [Thd =187]  Info Default FitPosition:0.853908026210315,score:121.054131972581
2025-08-03 08:46:18.926 [Thd =230]  Warn Default 还原光源最大功率
2025-08-03 08:46:18.926 [Thd =187]  Info Default LaserLamp MaxPower:300
2025-08-03 08:46:18.927 [Thd =185]  Info Default Restore,Please wait......
2025-08-03 08:46:19.927 [Thd =230]  Info Default OpenLamp Transmission
2025-08-03 08:46:19.927 [Thd =207]  Info MMSFocus _isStop = true 
2025-08-03 08:46:20.730 [Thd =161]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:46:21.740 [Thd =230]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:46:21.740 [Thd =230]  Info Default CloseLamp Reflection
2025-08-03 08:46:22.763 [Thd =185]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:46:24.264 [Thd =185]  Error Default SyncSend recv cmd timeout
2025-08-03 08:46:31.940 [Thd =224]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:46:32.036 [Thd =214]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:<Make0Calibration>b__23_1 End Memory usage:28486.86MB VirtualMemorySize:200.5 GB
2025-08-03 08:46:36.351 [Thd =1]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:46:36.597 [Thd =1]  Info Default make0 AreaToLinePoint:(3.97216996502495,7.27539244137096)
2025-08-03 08:46:36.651 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:ButtonMake_Click Before Memory usage:28487.51MB VirtualMemorySize:200.5 GB
2025-08-03 08:46:36.943 [Thd =233]  Info MMSFocus _isStop = true 
2025-08-03 08:46:40.107 [Thd =233]  Info Default 保存AF标定结果成功！
2025-08-03 08:46:40.389 [Thd =214]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0+<>c__DisplayClass33_0MethodName:<ButtonMake_Click>b__1 End Memory usage:28488.19MB VirtualMemorySize:200.5 GB
2025-08-03 08:46:40.389 [Thd =246]  Info Default SavePoint：WaferStagePoint:3.74779806002495,7.42471062937096,,,AFCalibrationPoint:65242703.6705754,66108825.4473657
2025-08-03 08:46:44.387 [Thd =230]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:46:44.387 [Thd =231]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:46:46.389 [Thd =230]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:46:46.389 [Thd =217]  Info Default 聚焦Track已关闭
2025-08-03 08:47:03.186 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:28487.27MB VirtualMemorySize:200.5 GB
2025-08-03 08:47:03.365 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click End Memory usage:28487.52MB VirtualMemorySize:200.5 GB
2025-08-03 08:47:03.470 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:28488.38MB VirtualMemorySize:200.5 GB
2025-08-03 08:47:07.197 [Thd =207]  Info Default 设置平场校正环境中......
2025-08-03 08:47:07.197 [Thd =187]  Info Default Flatfield Corrention Init******************
2025-08-03 08:47:07.427 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 08:47:07.427 [Thd =187]  Info Default aSwitchIndex index:0
2025-08-03 08:47:07.427 [Thd =187]  Info Default lens from ATF:
2025-08-03 08:47:07.427 [Thd =187]  Info Default objCount:3
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:P200;objId:0
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:P140;objId:1
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:P100;objId:2
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:07.427 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:07.428 [Thd =187]  Info Default lens from system settings:
2025-08-03 08:47:07.428 [Thd =187]  Info Default systemlensettings lens count:3
2025-08-03 08:47:07.428 [Thd =187]  Info Default ratio:P200;objId:0
2025-08-03 08:47:07.428 [Thd =187]  Info Default ratio:P140;objId:1
2025-08-03 08:47:07.428 [Thd =187]  Info Default ratio:P100;objId:2
2025-08-03 08:47:07.430 [Thd =187]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:47:07.462 [Thd =187]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:47:07.465 [Thd =187]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:47:07.465 [Thd =187]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:47:07.465 [Thd =187]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:47:07.466 [Thd =187]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:47:07.466 [Thd =187]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:47:07.466 [Thd =187]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:47:07.466 [Thd =187]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:47:07.469 [Thd =187]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:47:07.716 [Thd =187]  Info strip vectorBegin:(-10.474635,70.557855),VectorEnd:(-15.779962,70.557855),CaptureBegin:(-12.474635,70.557855)，CaptureEnd：(-13.779962,70.557855),StepScan:0.435108959268996
2025-08-03 08:47:08.420 [Thd =251]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:47:08.420 [Thd =187]  Info Default SetMaxPower:300
2025-08-03 08:47:09.421 [Thd =185]  Info Default 打开光源，亮度：46%
2025-08-03 08:47:09.421 [Thd =251]  Info Default OpenLamp Transmission
2025-08-03 08:47:09.447 [Thd =245]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:47:10.225 [Thd =228]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:47:10.949 [Thd =245]  Error Default SyncSend recv cmd timeout
2025-08-03 08:47:11.422 [Thd =187]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:47:11.422 [Thd =231]  Info Default 聚焦Track已关闭
2025-08-03 08:47:13.054 [Thd =251]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:47:13.054 [Thd =251]  Info Default OpenLamp Reflection
2025-08-03 08:47:13.433 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 08:47:14.860 [Thd =251]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:47:14.954 [Thd =187]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:47:14.954 [Thd =224]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:47:17.958 [Thd =187]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:47:17.958 [Thd =233]  Info Default 聚焦Track已开启
2025-08-03 08:47:21.435 [Thd =243]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:47:21.435 [Thd =243]  Info Default ChangeLightPath: False!
2025-08-03 08:47:21.435 [Thd =243]  Info Default Open lamp，Power:46%
2025-08-03 08:47:21.435 [Thd =187]  Info Default OpenLamp Transmission
2025-08-03 08:47:22.238 [Thd =251]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:47:22.438 [Thd =187]  Info Default OpenLamp Reflection
2025-08-03 08:47:24.253 [Thd =187]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:47:24.257 [Thd =231]  Info Default 平场校正中,请等待 ......
2025-08-03 08:47:24.258 [Thd =187]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:192
2025-08-03 08:47:24.258 [Thd =185]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:256
2025-08-03 08:47:24.258 [Thd =187]  Info Default CurrentSize:2048,2048
2025-08-03 08:47:24.258 [Thd =187]  Info Default Camera size no change
2025-08-03 08:47:24.258 [Thd =185]  Info Default CurrentSize:2048,2048
2025-08-03 08:47:24.258 [Thd =185]  Info Default Camera size no change
2025-08-03 08:47:24.258 [Thd =246]  Info Default 扫描图片......
2025-08-03 08:47:24.259 [Thd =187]  Info Default Set camera size success
2025-08-03 08:47:24.259 [Thd =187]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:47:24.733 [Thd =185]  Info Default Set camera size success
2025-08-03 08:47:24.734 [Thd =185]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:47:25.238 [Thd =187]  Info Default Set camera parameter
2025-08-03 08:47:25.238 [Thd =187]  Info Default TriggerMode is On,dont set
2025-08-03 08:47:25.238 [Thd =187]  Info Default BUFFER_COUNT no change
2025-08-03 08:47:26.217 [Thd =185]  Info Default Set camera parameter
2025-08-03 08:47:26.217 [Thd =185]  Info Default TriggerMode is On,dont set
2025-08-03 08:47:26.217 [Thd =185]  Info Default BUFFER_COUNT no change
2025-08-03 08:47:31.220 [Thd =187]  Info Default FlatfieldCorrention scanStrips:1,Intensity:46
2025-08-03 08:47:31.220 [Thd =187]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:0,Light:46
2025-08-03 08:47:31.220 [Thd =187]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4746354016405,strip.VectorBegin.Y:70.5578546594561
2025-08-03 08:47:31.559 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:47:31.561 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:12.4746354016405,EndPoint:13.7799622794475
2025-08-03 08:47:31.561 [Thd =187]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7799622794475,strip.VectorBegin.Y:70.5578546594561
2025-08-03 08:47:31.781 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\Flatfield
2025-08-03 08:47:31.782 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\Flatfield
2025-08-03 08:47:32.633 [Thd =187]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:1,Light:45
2025-08-03 08:47:32.633 [Thd =187]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4746354016405,strip.VectorBegin.Y:70.5578546594561
2025-08-03 08:47:32.661 [Thd =207]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 08:47:33.065 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:47:33.068 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:12.4746354016405,EndPoint:13.7799622794475
2025-08-03 08:47:33.068 [Thd =187]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7799622794475,strip.VectorBegin.Y:70.5578546594561
2025-08-03 08:47:33.279 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\Flatfield
2025-08-03 08:47:33.280 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\Flatfield
2025-08-03 08:47:34.134 [Thd =187]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:2,Light:46
2025-08-03 08:47:34.134 [Thd =187]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4746354016405,strip.VectorBegin.Y:70.5578546594561
2025-08-03 08:47:34.163 [Thd =207]  Error Default SyncSend recv cmd timeout
2025-08-03 08:47:34.195 [Thd =224]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:47:34.559 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:47:34.562 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:12.4746354016405,EndPoint:13.7799622794475
2025-08-03 08:47:34.562 [Thd =187]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7799622794475,strip.VectorBegin.Y:70.5578546594561
2025-08-03 08:47:34.776 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\Flatfield
2025-08-03 08:47:34.777 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\62142255-YXC-02\rcp_DB_1\Flatfield
2025-08-03 08:47:35.696 [Thd =224]  Error Default SyncSend recv cmd timeout
2025-08-03 08:47:35.844 [Thd =185]  Warn Default 还原光源最大功率
2025-08-03 08:47:35.844 [Thd =187]  Info Default LaserLamp MaxPower:300
2025-08-03 08:47:36.845 [Thd =214]  Info Default OpenLamp Transmission
2025-08-03 08:47:36.985 [Thd =228]  Info MMSFocus _isStop = true 
2025-08-03 08:47:37.649 [Thd =185]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:47:38.653 [Thd =214]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:47:38.653 [Thd =214]  Info Default CloseLamp Reflection
2025-08-03 08:47:39.502 [Thd =228]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:47:39.502 [Thd =207]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:47:39.690 [Thd =245]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:47:41.191 [Thd =245]  Error Default SyncSend recv cmd timeout
2025-08-03 08:47:41.504 [Thd =228]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:47:41.504 [Thd =251]  Info Default 聚焦Track已关闭
2025-08-03 08:47:48.872 [Thd =188]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:47:48.872 [Thd =243]  Info Default 平场校正中,请等待 ......
2025-08-03 08:47:49.971 [Thd =228]  Info Default 校正完成
2025-08-03 08:47:52.786 [Thd =1]  Info flatfieldbtn Ok_Click  begin
2025-08-03 08:47:52.787 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm begin
2025-08-03 08:47:52.788 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy begin
2025-08-03 08:47:52.788 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy end
2025-08-03 08:47:52.788 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm end
2025-08-03 08:47:52.789 [Thd =1]  Info ExecuteSuccess  begin
2025-08-03 08:47:52.789 [Thd =1]  Info ExecuteSuccess  end
2025-08-03 08:47:53.999 [Thd =1]  Info flatfield btnOk_Click  end
2025-08-03 08:47:55.399 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnXYCalib_Click Before Memory usage:28562.34MB VirtualMemorySize:200.6 GB
2025-08-03 08:47:55.570 [Thd =230]  Info Default 设置RTB 标定环境中,请等待 ......
2025-08-03 08:47:55.570 [Thd =187]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 08:47:55.573 [Thd =187]  Info Default SetDistortionPara disaabled
2025-08-03 08:47:55.887 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 08:47:55.887 [Thd =187]  Info Default aSwitchIndex index:0
2025-08-03 08:47:55.887 [Thd =187]  Info Default lens from ATF:
2025-08-03 08:47:55.887 [Thd =187]  Info Default objCount:3
2025-08-03 08:47:55.887 [Thd =187]  Info Default ratio:P200;objId:0
2025-08-03 08:47:55.887 [Thd =187]  Info Default ratio:P140;objId:1
2025-08-03 08:47:55.887 [Thd =187]  Info Default ratio:P100;objId:2
2025-08-03 08:47:55.887 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:55.887 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:55.887 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:55.888 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:55.888 [Thd =187]  Info Default ratio:;objId:0
2025-08-03 08:47:55.888 [Thd =187]  Info Default lens from system settings:
2025-08-03 08:47:55.888 [Thd =187]  Info Default systemlensettings lens count:3
2025-08-03 08:47:55.888 [Thd =187]  Info Default ratio:P200;objId:0
2025-08-03 08:47:55.888 [Thd =187]  Info Default ratio:P140;objId:1
2025-08-03 08:47:55.888 [Thd =187]  Info Default ratio:P100;objId:2
2025-08-03 08:47:55.890 [Thd =187]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 08:47:55.924 [Thd =187]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 08:47:55.927 [Thd =187]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 08:47:55.927 [Thd =187]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 08:47:55.927 [Thd =187]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 08:47:55.928 [Thd =187]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 08:47:55.928 [Thd =187]  Info Default BaseScanObjectLine:------------------
2025-08-03 08:47:55.928 [Thd =187]  Info Default BaseScanObjectLine:*****************
2025-08-03 08:47:55.928 [Thd =187]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 08:47:55.928 [Thd =187]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:47:55.928 [Thd =187]  Info Default deltax_stage 22.6111220976858, deltay_stage:0.
2025-08-03 08:47:55.928 [Thd =187]  Info Default MoveStageForMarkCol101 point (62.0417865183759, 50.0557091283675), GDS ref(5500000, 138400000), gdsObject(28111000, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:47:55.928 [Thd =187]  Info Default deltax_stage 0, deltay_stage:-123.225736977233.
2025-08-03 08:47:55.928 [Thd =187]  Info Default MoveStageForMarkCol102 point (-61.1839504588572, 50.0557091283675), GDS ref(28111000, 138400000), gdsObject(28111000, 15174000), stageRef(62.0417865183759, 50.0557091283675).
2025-08-03 08:47:55.928 [Thd =187]  Info Default located_pos:(-61.1839504588572, 50.0557091283675)
2025-08-03 08:48:02.678 [Thd =187]  Info strip vectorBegin:(-58.52447,49.906391),VectorEnd:(-63.829796,49.906391),CaptureBegin:(-60.52447,49.906391)，CaptureEnd：(-61.829796,49.906391),StepScan:0.435108959268996
2025-08-03 08:48:02.678 [Thd =187]  Info Default VectorBegin:(-58.5244695945882,49.9063909403675)
2025-08-03 08:48:03.906 [Thd =206]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:48:03.906 [Thd =187]  Info Default SetMaxPower:300
2025-08-03 08:48:04.908 [Thd =230]  Info Default 打开光源，亮度：46%
2025-08-03 08:48:04.908 [Thd =224]  Info Default OpenLamp Transmission
2025-08-03 08:48:04.933 [Thd =246]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:48:05.718 [Thd =217]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:48:06.434 [Thd =246]  Error Default SyncSend recv cmd timeout
2025-08-03 08:48:06.908 [Thd =187]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:48:06.908 [Thd =243]  Info Default 聚焦Track已关闭
2025-08-03 08:48:08.539 [Thd =224]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:48:08.539 [Thd =224]  Info Default OpenLamp Reflection
2025-08-03 08:48:08.905 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 08:48:10.345 [Thd =224]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:48:10.409 [Thd =187]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:48:10.409 [Thd =161]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:48:13.418 [Thd =187]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:48:13.418 [Thd =217]  Info Default 聚焦Track已开启
2025-08-03 08:48:16.929 [Thd =214]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:48:16.929 [Thd =214]  Info Default ChangeLightPath: False!
2025-08-03 08:48:16.929 [Thd =188]  Info Default RTB 标定中,请等待 ......
2025-08-03 08:48:16.929 [Thd =231]  Info Default CurrentSize:2048,2048
2025-08-03 08:48:16.929 [Thd =231]  Info Default Camera size no change
2025-08-03 08:48:16.929 [Thd =228]  Info Default CurrentSize:2048,2048
2025-08-03 08:48:16.930 [Thd =228]  Info Default Camera size no change
2025-08-03 08:48:16.931 [Thd =231]  Info Default Set camera size success
2025-08-03 08:48:16.931 [Thd =231]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:48:16.931 [Thd =228]  Info Default Set camera size success
2025-08-03 08:48:16.931 [Thd =228]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:48:18.382 [Thd =231]  Info Default Set camera parameter
2025-08-03 08:48:18.382 [Thd =231]  Info Default TriggerMode is On,dont set
2025-08-03 08:48:18.382 [Thd =231]  Info Default BUFFER_COUNT no change
2025-08-03 08:48:18.885 [Thd =228]  Info Default Set camera parameter
2025-08-03 08:48:18.886 [Thd =228]  Info Default TriggerMode is On,dont set
2025-08-03 08:48:18.886 [Thd =228]  Info Default BUFFER_COUNT no change
2025-08-03 08:48:18.893 [Thd =187]  Info Default SetDistortionPara disaabled
2025-08-03 08:48:18.893 [Thd =187]  Info Default scanStrips:1
2025-08-03 08:48:18.944 [Thd =187]  Info Default m_focusMapMode：0
2025-08-03 08:48:18.946 [Thd =187]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455546518065,BeginPoint:60.5244695945882,EndPoint:61.8297964723952
2025-08-03 08:48:19.953 [Thd =187]  Info Default Get_Tolerance_and_Rounding:******Tolerance********
2025-08-03 08:48:22.765 [Thd =187]  Info Default Get_Tolerance_and_Rounding:-----------Tolerance-------------
2025-08-03 08:48:22.811 [Thd =251]  Warn Default 还原光源最大功率
2025-08-03 08:48:22.811 [Thd =207]  Info Default LaserLamp MaxPower:300
2025-08-03 08:48:23.812 [Thd =231]  Info Default OpenLamp Transmission
2025-08-03 08:48:24.427 [Thd =214]  Info MMSFocus _isStop = true 
2025-08-03 08:48:24.616 [Thd =224]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:48:25.619 [Thd =231]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:48:25.619 [Thd =231]  Info Default CloseLamp Reflection
2025-08-03 08:48:26.656 [Thd =161]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:48:26.941 [Thd =214]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:48:26.941 [Thd =224]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:48:28.157 [Thd =161]  Error Default SyncSend recv cmd timeout
2025-08-03 08:48:28.944 [Thd =214]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:48:28.944 [Thd =214]  Info Default 聚焦Track已关闭
2025-08-03 08:48:35.830 [Thd =228]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:48:35.834 [Thd =206]  Info Default 公差标定完成
2025-08-03 08:48:35.867 [Thd =207]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:<btnXYCalib_Click>b__28_1 Before Memory usage:28577.79MB VirtualMemorySize:200.6 GB
2025-08-03 08:48:46.868 [Thd =1]  Info Default CDdefectResolution is 0.2
2025-08-03 08:48:46.868 [Thd =1]  Info Default CDdefectResolutionBil is 0.25
2025-08-03 08:48:46.868 [Thd =1]  Info Default PHdefectResolution is 0.2
2025-08-03 08:49:03.382 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 08:49:03.437 [Thd =224]  Info Default Start [1/1]
2025-08-03 08:49:03.438 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 08:49:03.438 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 08:49:03.444 [Thd =23]  Info Default 开始检查！
2025-08-03 08:49:11.342 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 08:49:11.342 [Thd =217]  Info Default 初始化插件
2025-08-03 08:49:11.342 [Thd =246]  Info Default CurrentSize:2048,2048
2025-08-03 08:49:11.342 [Thd =246]  Info Default Camera size no change
2025-08-03 08:49:11.343 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:49:11.343 [Thd =206]  Info Default CurrentSize:2048,2048
2025-08-03 08:49:11.343 [Thd =206]  Info Default Camera size no change
2025-08-03 08:49:11.343 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:49:11.343 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 08:49:11.343 [Thd =246]  Info Default Set camera size success
2025-08-03 08:49:11.343 [Thd =246]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:49:11.345 [Thd =245]  Info Default 设置 TDI 相机参数...
2025-08-03 08:49:11.345 [Thd =188]  Info Default 初始化DB目录
2025-08-03 08:49:11.466 [Thd =1]  Info Default deltax_stage 14.9114545202891, deltay_stage:0.
2025-08-03 08:49:11.466 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0415166312006, 57.7553767104942), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:49:11.466 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59979777839006.
2025-08-03 08:49:11.466 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6413144095907, 57.7553767104942), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0415166312006, 57.7553767104942).
2025-08-03 08:49:11.466 [Thd =1]  Info Default located_pos:(69.6413144095907, 57.7553767104942)
2025-08-03 08:49:11.466 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:49:11.467 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3587405134175, 72.6668312399436), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:49:11.467 [Thd =1]  Info Default located_pos:(-62.3587405134175, 72.6668312399436)
2025-08-03 08:49:11.467 [Thd =205]  Info Default Measuring the height difference of inspection area
2025-08-03 08:49:11.817 [Thd =206]  Info Default Set camera size success
2025-08-03 08:49:11.818 [Thd =206]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:49:12.323 [Thd =246]  Info Default Set camera parameter
2025-08-03 08:49:12.323 [Thd =246]  Info Default TriggerMode is On,dont set
2025-08-03 08:49:12.323 [Thd =246]  Info Default BUFFER_COUNT no change
2025-08-03 08:49:13.301 [Thd =206]  Info Default Set camera parameter
2025-08-03 08:49:13.301 [Thd =206]  Info Default TriggerMode is On,dont set
2025-08-03 08:49:13.301 [Thd =206]  Info Default BUFFER_COUNT no change
2025-08-03 08:49:18.574 [Thd =214]  Info Default 初始化DPU服务器！
2025-08-03 08:49:18.574 [Thd =161]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 08:49:26.974 [Thd =206]  Info MMSFocus _isStop = true 
2025-08-03 08:49:30.502 [Thd =161]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 08:49:30.536 [Thd =1]  Info Default Register inspect event！
2025-08-03 08:49:30.548 [Thd =1]  Info Default initial*****Light_intensity:46, min:10, max:220
2025-08-03 08:49:30.548 [Thd =231]  Info Default 初始化检测数据
2025-08-03 08:49:30.549 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 08:49:30.549 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 08:49:30.549 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3587405134175, reference point Stage_Y: 72.6668312399436, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 08:49:30.549 [Thd =217]  Info Default m_start_strip_no:0
2025-08-03 08:49:30.549 [Thd =217]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 08:49:30.550 [Thd =217]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.084,"m_y_tolerance":-0.116,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,220,3,0,1130102784,1065353216,1065353216,0,40,0],"m_R_collect":[200,201,105,0,1128792064,1065353216,1065353216,0,257,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.172,"m_y_tolerance_R":-0.196,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 08:49:30.551 [Thd =217]  Info Default m_line_camera_cols:321
2025-08-03 08:49:30.551 [Thd =217]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 08:49:30.551 [Thd =217]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 08:49:30.555 [Thd =217]  Info Default SetDistortionPara disaabled
2025-08-03 08:49:30.555 [Thd =217]  Info Default Set distortion correction parameters End
2025-08-03 08:49:30.555 [Thd =217]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 08:49:33.811 [Thd =217]  Info Default InitDie2DBRes Success!!!!
2025-08-03 08:49:37.856 [Thd =206]  Info Default DemarcateInspectZ:2.7
2025-08-03 08:49:38.637 [Thd =206]  Info MMSFocus _isStop = true 
2025-08-03 08:49:49.799 [Thd =206]  Info Default DemarcateInspectZ:2.6
2025-08-03 08:49:50.579 [Thd =206]  Info MMSFocus _isStop = true 
2025-08-03 08:50:00.613 [Thd =206]  Info Default DemarcateInspectZ:0.1
2025-08-03 08:50:01.393 [Thd =206]  Info MMSFocus _isStop = true 
2025-08-03 08:50:12.550 [Thd =206]  Info Default DemarcateInspectZ:0.8
2025-08-03 08:50:12.557 [Thd =206]  Info Default MarkHeightDifference:2.6
2025-08-03 08:50:12.558 [Thd =217]  Info Default Difference of the Inspection Area2.60μm
2025-08-03 08:50:33.528 [Thd =1]  Info Default Successful alignment！
2025-08-03 08:50:33.528 [Thd =228]  Info Default 对准完成！
2025-08-03 08:50:33.528 [Thd =214]  Info Default 稍等！设置相机参数中
2025-08-03 08:50:33.528 [Thd =206]  Info Default 移动到起始点位
2025-08-03 08:50:33.528 [Thd =161]  Info Default 注册相机取图
2025-08-03 08:50:34.367 [Thd =230]  Info MMSFocus _isStop = true 
2025-08-03 08:50:34.585 [Thd =230]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:50:34.585 [Thd =23]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:50:34.585 [Thd =230]  Info Default SetMaxPower:300
2025-08-03 08:50:35.586 [Thd =205]  Info Default 打开光源，亮度：46%
2025-08-03 08:50:35.586 [Thd =206]  Info Default OpenLamp Transmission
2025-08-03 08:50:35.615 [Thd =251]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:50:36.391 [Thd =211]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:50:37.116 [Thd =251]  Error Default SyncSend recv cmd timeout
2025-08-03 08:50:37.587 [Thd =191]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:50:37.587 [Thd =188]  Info Default 聚焦Track已关闭
2025-08-03 08:50:38.890 [Thd =191]  Info MMSFocus _isStop = true 
2025-08-03 08:50:39.207 [Thd =206]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:50:39.207 [Thd =206]  Info Default OpenLamp Reflection
2025-08-03 08:50:40.394 [Thd =191]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:50:40.394 [Thd =233]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:50:41.017 [Thd =206]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:50:42.397 [Thd =191]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:50:42.398 [Thd =251]  Info Default 聚焦Track已开启
2025-08-03 08:50:47.605 [Thd =231]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:50:47.605 [Thd =231]  Info Default ChangeLightPath: False!
2025-08-03 08:50:47.605 [Thd =251]  Info Default 执行MarkOffSet......
2025-08-03 08:50:47.605 [Thd =217]  Info Default CurrentSize:2048,2048
2025-08-03 08:50:47.605 [Thd =217]  Info Default Camera size no change
2025-08-03 08:50:47.606 [Thd =217]  Info Default Set camera size success
2025-08-03 08:50:47.606 [Thd =217]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:50:48.586 [Thd =217]  Info Default Set camera parameter
2025-08-03 08:50:48.586 [Thd =217]  Info Default TriggerMode is On,dont set
2025-08-03 08:50:48.586 [Thd =217]  Info Default BUFFER_COUNT no change
2025-08-03 08:50:48.589 [Thd =230]  Info strip vectorBegin:(59.449324,72.517513),VectorEnd:(64.754651,72.517513),CaptureBegin:(61.449324,72.517513)，CaptureEnd：(62.754651,72.517513),StepScan:0.435108959268996
2025-08-03 08:50:50.857 [Thd =230]  Info Default m_focusMapMode：0
2025-08-03 08:50:50.859 [Thd =230]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455546518065,BeginPoint:-61.4493242244044,EndPoint:-62.7546511022114
2025-08-03 08:50:51.454 [Thd =31]  Info Default stormCore.MatchTemplate:0.1654232
2025-08-03 08:50:51.455 [Thd =205]  Warn Default Mark offset match score:0.16542
2025-08-03 08:50:51.609 [Thd =230]  Info MMSFocus _isStop = true 
2025-08-03 08:50:52.133 [Thd =233]  Warn Default 还原光源最大功率
2025-08-03 08:50:52.133 [Thd =230]  Info Default LaserLamp MaxPower:300
2025-08-03 08:50:53.141 [Thd =214]  Info MMSFocus _isStop = true 
2025-08-03 08:50:53.141 [Thd =246]  Info Default OpenLamp Transmission
2025-08-03 08:50:53.945 [Thd =217]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:50:54.949 [Thd =246]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:50:54.949 [Thd =246]  Info Default CloseLamp Reflection
2025-08-03 08:50:55.664 [Thd =214]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:50:55.664 [Thd =179]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:50:55.971 [Thd =185]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:50:57.473 [Thd =185]  Error Default SyncSend recv cmd timeout
2025-08-03 08:50:57.665 [Thd =214]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:50:57.665 [Thd =191]  Info Default 聚焦Track已关闭
2025-08-03 08:51:05.168 [Thd =231]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:51:05.792 [Thd =191]  Error Default Mark匹配分值过低或者匹配失败！
2025-08-03 08:51:05.793 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Aborted
2025-08-03 08:51:05.796 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Aborted
2025-08-03 08:51:05.797 [Thd =1]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 08:51:05.798 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 08:51:05.818 [Thd =246]  Info Default Chuck vacuum close
2025-08-03 08:51:06.820 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:51:06.820 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Aborted!CurTaskName:2948
2025-08-03 08:51:06.820 [Thd =161]  Info Default Inspection stop!
2025-08-03 08:51:07.636 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:52:07.643 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 08:52:07.794 [Thd =228]  Info Default Start [1/1]
2025-08-03 08:52:07.794 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 08:52:07.794 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 08:52:07.796 [Thd =161]  Info Default 开始检查！
2025-08-03 08:52:15.976 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 08:52:15.977 [Thd =191]  Info Default 初始化插件
2025-08-03 08:52:15.977 [Thd =188]  Info Default CurrentSize:2048,2048
2025-08-03 08:52:15.977 [Thd =188]  Info Default Camera size no change
2025-08-03 08:52:15.977 [Thd =245]  Info Default CurrentSize:2048,2048
2025-08-03 08:52:15.977 [Thd =245]  Info Default Camera size no change
2025-08-03 08:52:15.977 [Thd =188]  Info Default Set camera size success
2025-08-03 08:52:15.977 [Thd =188]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:52:15.978 [Thd =246]  Info Default 设置 TDI 相机参数...
2025-08-03 08:52:15.979 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:52:15.979 [Thd =230]  Info Default 初始化DB目录
2025-08-03 08:52:15.980 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:52:15.980 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 08:52:16.102 [Thd =1]  Info Default deltax_stage 14.9114545202891, deltay_stage:0.
2025-08-03 08:52:16.102 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0415166312006, 57.7553767104942), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:52:16.102 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59979777839006.
2025-08-03 08:52:16.102 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6413144095907, 57.7553767104942), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0415166312006, 57.7553767104942).
2025-08-03 08:52:16.102 [Thd =1]  Info Default located_pos:(69.6413144095907, 57.7553767104942)
2025-08-03 08:52:16.103 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:52:16.103 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3587405134175, 72.6668312399436), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:52:16.103 [Thd =1]  Info Default located_pos:(-62.3587405134175, 72.6668312399436)
2025-08-03 08:52:16.103 [Thd =217]  Info Default 初始化DPU服务器！
2025-08-03 08:52:16.103 [Thd =185]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 08:52:23.825 [Thd =245]  Info Default Set camera size success
2025-08-03 08:52:23.826 [Thd =245]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:52:23.826 [Thd =205]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426151,"ServiceStartTime":"2025\/8\/3 8:49:27","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:23.827 [Thd =187]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426151,"ServiceStartTime":"2025\/8\/3 8:49:25","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":35,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:23.827 [Thd =203]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426151,"ServiceStartTime":"2025\/8\/3 8:49:26","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:23.828 [Thd =246]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426151,"ServiceStartTime":"2025\/8\/3 8:50:22","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:24.486 [Thd =188]  Info Default Set camera parameter
2025-08-03 08:52:24.487 [Thd =188]  Info Default TriggerMode is On,dont set
2025-08-03 08:52:24.487 [Thd =188]  Info Default BUFFER_COUNT no change
2025-08-03 08:52:25.308 [Thd =245]  Info Default Set camera parameter
2025-08-03 08:52:25.308 [Thd =245]  Info Default TriggerMode is On,dont set
2025-08-03 08:52:25.309 [Thd =245]  Info Default BUFFER_COUNT no change
2025-08-03 08:52:26.342 [Thd =6]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426156,"ServiceStartTime":"2025\/8\/3 8:52:22","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:26.358 [Thd =228]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426156,"ServiceStartTime":"2025\/8\/3 8:52:23","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:26.360 [Thd =23]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426156,"ServiceStartTime":"2025\/8\/3 8:52:23","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:26.412 [Thd =174]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426156,"ServiceStartTime":"2025\/8\/3 8:53:18","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:52:26.504 [Thd =185]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 08:52:26.535 [Thd =1]  Info Default Register inspect event！
2025-08-03 08:52:26.554 [Thd =1]  Info Default initial*****Light_intensity:46, min:10, max:220
2025-08-03 08:52:26.554 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 08:52:26.554 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 08:52:26.554 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3587405134175, reference point Stage_Y: 72.6668312399436, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 08:52:26.555 [Thd =203]  Info Default m_start_strip_no:0
2025-08-03 08:52:26.555 [Thd =203]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 08:52:26.555 [Thd =179]  Info Default 初始化检测数据
2025-08-03 08:52:26.555 [Thd =203]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.084,"m_y_tolerance":-0.116,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,220,3,0,1130102784,1065353216,1065353216,0,40,0],"m_R_collect":[200,201,105,0,1128792064,1065353216,1065353216,0,257,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.172,"m_y_tolerance_R":-0.196,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 08:52:26.556 [Thd =203]  Info Default m_line_camera_cols:321
2025-08-03 08:52:26.556 [Thd =203]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 08:52:26.556 [Thd =203]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 08:52:26.559 [Thd =203]  Info Default SetDistortionPara disaabled
2025-08-03 08:52:26.559 [Thd =203]  Info Default Set distortion correction parameters End
2025-08-03 08:52:26.559 [Thd =203]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 08:52:27.066 [Thd =203]  Info Default InitDie2DBRes Success!!!!
2025-08-03 08:52:27.068 [Thd =1]  Info Default Successful alignment！
2025-08-03 08:52:27.068 [Thd =228]  Info Default 对准完成！
2025-08-03 08:52:27.068 [Thd =243]  Info Default 注册相机取图
2025-08-03 08:52:27.068 [Thd =207]  Info Default 稍等！设置相机参数中
2025-08-03 08:52:27.069 [Thd =187]  Info Default 移动到起始点位
2025-08-03 08:52:27.835 [Thd =214]  Info MMSFocus _isStop = true 
2025-08-03 08:52:28.040 [Thd =214]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:52:28.040 [Thd =187]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:52:28.040 [Thd =214]  Info Default SetMaxPower:300
2025-08-03 08:52:29.041 [Thd =207]  Info Default 打开光源，亮度：46%
2025-08-03 08:52:29.041 [Thd =161]  Info Default OpenLamp Transmission
2025-08-03 08:52:29.077 [Thd =185]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:52:29.846 [Thd =231]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:52:30.587 [Thd =185]  Error Default SyncSend recv cmd timeout
2025-08-03 08:52:31.043 [Thd =211]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:52:31.043 [Thd =174]  Info Default 聚焦Track已关闭
2025-08-03 08:52:32.354 [Thd =211]  Info MMSFocus _isStop = true 
2025-08-03 08:52:32.656 [Thd =161]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:52:32.656 [Thd =161]  Info Default OpenLamp Reflection
2025-08-03 08:52:33.858 [Thd =211]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:52:33.858 [Thd =231]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:52:34.462 [Thd =161]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:52:35.861 [Thd =211]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:52:35.861 [Thd =211]  Info Default 聚焦Track已开启
2025-08-03 08:52:41.058 [Thd =188]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:52:41.058 [Thd =188]  Info Default ChangeLightPath: False!
2025-08-03 08:52:41.058 [Thd =188]  Info Default 执行MarkOffSet......
2025-08-03 08:52:41.058 [Thd =6]  Info Default CurrentSize:2048,2048
2025-08-03 08:52:41.058 [Thd =6]  Info Default Camera size no change
2025-08-03 08:52:41.058 [Thd =6]  Info Default Set camera size success
2025-08-03 08:52:41.058 [Thd =6]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:52:42.036 [Thd =6]  Info Default Set camera parameter
2025-08-03 08:52:42.036 [Thd =6]  Info Default TriggerMode is On,dont set
2025-08-03 08:52:42.036 [Thd =6]  Info Default BUFFER_COUNT no change
2025-08-03 08:52:42.040 [Thd =214]  Info strip vectorBegin:(59.449324,72.517513),VectorEnd:(64.754651,72.517513),CaptureBegin:(61.449324,72.517513)，CaptureEnd：(62.754651,72.517513),StepScan:0.435108959268996
2025-08-03 08:52:44.317 [Thd =214]  Info Default m_focusMapMode：0
2025-08-03 08:52:44.320 [Thd =214]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455546518065,BeginPoint:-61.4493242244044,EndPoint:-62.7546511022114
2025-08-03 08:52:44.899 [Thd =31]  Info Default stormCore.MatchTemplate:0.1654567
2025-08-03 08:52:44.900 [Thd =207]  Warn Default Mark offset match score:0.16546
2025-08-03 08:52:45.061 [Thd =214]  Info MMSFocus _isStop = true 
2025-08-03 08:52:45.585 [Thd =231]  Warn Default 还原光源最大功率
2025-08-03 08:52:45.585 [Thd =214]  Info Default LaserLamp MaxPower:300
2025-08-03 08:52:46.586 [Thd =228]  Info MMSFocus _isStop = true 
2025-08-03 08:52:46.586 [Thd =191]  Info Default OpenLamp Transmission
2025-08-03 08:52:47.390 [Thd =230]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:52:48.393 [Thd =191]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:52:48.393 [Thd =191]  Info Default CloseLamp Reflection
2025-08-03 08:52:49.098 [Thd =228]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:52:49.098 [Thd =243]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:52:49.442 [Thd =174]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:52:50.947 [Thd =174]  Error Default SyncSend recv cmd timeout
2025-08-03 08:52:51.106 [Thd =228]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:52:51.106 [Thd =245]  Info Default 聚焦Track已关闭
2025-08-03 08:52:58.630 [Thd =207]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:52:59.260 [Thd =206]  Error Default Mark匹配分值过低或者匹配失败！
2025-08-03 08:52:59.260 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Aborted
2025-08-03 08:52:59.265 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Aborted
2025-08-03 08:52:59.267 [Thd =1]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 08:52:59.268 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 08:52:59.291 [Thd =179]  Info Default Chuck vacuum close
2025-08-03 08:53:00.292 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:53:00.292 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Aborted!CurTaskName:2949
2025-08-03 08:53:00.292 [Thd =203]  Info Default Inspection stop!
2025-08-03 08:53:01.110 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:53:26.875 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 08:53:27.008 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 08:53:27.008 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 08:53:27.008 [Thd =217]  Info Default Start [1/1]
2025-08-03 08:53:27.009 [Thd =161]  Info Default 开始检查！
2025-08-03 08:53:34.391 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 08:53:34.391 [Thd =211]  Info Default 初始化插件
2025-08-03 08:53:34.391 [Thd =174]  Info Default CurrentSize:2048,2048
2025-08-03 08:53:34.391 [Thd =174]  Info Default Camera size no change
2025-08-03 08:53:34.392 [Thd =174]  Info Default Set camera size success
2025-08-03 08:53:34.392 [Thd =174]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:53:34.392 [Thd =230]  Info Default 初始化DB目录
2025-08-03 08:53:34.393 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:53:34.394 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:53:34.394 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 08:53:34.394 [Thd =185]  Info Default 设置 TDI 相机参数...
2025-08-03 08:53:34.394 [Thd =243]  Info Default CurrentSize:2048,2048
2025-08-03 08:53:34.394 [Thd =243]  Info Default Camera size no change
2025-08-03 08:53:34.516 [Thd =1]  Info Default deltax_stage 14.9114545202891, deltay_stage:0.
2025-08-03 08:53:34.516 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0415166312006, 57.7553767104942), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:53:34.516 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59979777839006.
2025-08-03 08:53:34.516 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6413144095907, 57.7553767104942), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0415166312006, 57.7553767104942).
2025-08-03 08:53:34.516 [Thd =1]  Info Default located_pos:(69.6413144095907, 57.7553767104942)
2025-08-03 08:53:34.517 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:53:34.517 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3587405134175, 72.6668312399436), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:53:34.517 [Thd =1]  Info Default located_pos:(-62.3587405134175, 72.6668312399436)
2025-08-03 08:53:34.517 [Thd =245]  Info Default 初始化DPU服务器！
2025-08-03 08:53:34.517 [Thd =23]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 08:53:34.948 [Thd =243]  Info Default Set camera size success
2025-08-03 08:53:34.949 [Thd =243]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:53:42.416 [Thd =174]  Info Default Set camera parameter
2025-08-03 08:53:42.417 [Thd =207]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426200,"ServiceStartTime":"2025\/8\/3 8:52:23","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:42.417 [Thd =174]  Info Default TriggerMode is On,dont set
2025-08-03 08:53:42.417 [Thd =174]  Info Default BUFFER_COUNT no change
2025-08-03 08:53:42.417 [Thd =224]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426200,"ServiceStartTime":"2025\/8\/3 8:52:23","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":35,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:42.418 [Thd =179]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426200,"ServiceStartTime":"2025\/8\/3 8:52:22","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:42.418 [Thd =224]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426200,"ServiceStartTime":"2025\/8\/3 8:53:18","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:43.037 [Thd =243]  Info Default Set camera parameter
2025-08-03 08:53:43.037 [Thd =243]  Info Default TriggerMode is On,dont set
2025-08-03 08:53:43.037 [Thd =243]  Info Default BUFFER_COUNT no change
2025-08-03 08:53:44.945 [Thd =174]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426205,"ServiceStartTime":"2025\/8\/3 8:53:41","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:44.950 [Thd =230]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426205,"ServiceStartTime":"2025\/8\/3 8:53:41","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:44.950 [Thd =179]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426205,"ServiceStartTime":"2025\/8\/3 8:53:42","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:44.962 [Thd =191]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426205,"ServiceStartTime":"2025\/8\/3 8:54:37","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":1,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:53:45.055 [Thd =23]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 08:53:45.090 [Thd =1]  Info Default Register inspect event！
2025-08-03 08:53:45.100 [Thd =1]  Info Default initial*****Light_intensity:46, min:10, max:220
2025-08-03 08:53:45.100 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 08:53:45.100 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 08:53:45.101 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3587405134175, reference point Stage_Y: 72.6668312399436, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 08:53:45.101 [Thd =231]  Info Default m_start_strip_no:0
2025-08-03 08:53:45.101 [Thd =231]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 08:53:45.101 [Thd =231]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.084,"m_y_tolerance":-0.116,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,220,3,0,1130102784,1065353216,1065353216,0,40,0],"m_R_collect":[200,201,105,0,1128792064,1065353216,1065353216,0,257,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.172,"m_y_tolerance_R":-0.196,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 08:53:45.102 [Thd =231]  Info Default m_line_camera_cols:321
2025-08-03 08:53:45.102 [Thd =231]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 08:53:45.102 [Thd =231]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 08:53:45.103 [Thd =217]  Info Default 初始化检测数据
2025-08-03 08:53:45.105 [Thd =231]  Info Default SetDistortionPara disaabled
2025-08-03 08:53:45.105 [Thd =231]  Info Default Set distortion correction parameters End
2025-08-03 08:53:45.106 [Thd =231]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 08:53:45.613 [Thd =231]  Info Default InitDie2DBRes Success!!!!
2025-08-03 08:53:48.808 [Thd =1]  Info Default Successful alignment！
2025-08-03 08:53:48.808 [Thd =188]  Info Default 对准完成！
2025-08-03 08:53:48.809 [Thd =251]  Info Default 稍等！设置相机参数中
2025-08-03 08:53:48.809 [Thd =230]  Info Default 注册相机取图
2025-08-03 08:53:48.809 [Thd =211]  Info Default 移动到起始点位
2025-08-03 08:53:49.428 [Thd =231]  Info MMSFocus _isStop = true 
2025-08-03 08:53:49.631 [Thd =231]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:53:49.632 [Thd =206]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:53:49.632 [Thd =231]  Info Default SetMaxPower:300
2025-08-03 08:53:50.633 [Thd =205]  Info Default 打开光源，亮度：46%
2025-08-03 08:53:50.633 [Thd =187]  Info Default OpenLamp Transmission
2025-08-03 08:53:50.645 [Thd =6]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:53:51.437 [Thd =185]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:53:52.147 [Thd =6]  Error Default SyncSend recv cmd timeout
2025-08-03 08:53:52.634 [Thd =203]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:53:52.634 [Thd =243]  Info Default 聚焦Track已关闭
2025-08-03 08:53:53.936 [Thd =203]  Info MMSFocus _isStop = true 
2025-08-03 08:53:54.248 [Thd =187]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:53:54.248 [Thd =187]  Info Default OpenLamp Reflection
2025-08-03 08:53:55.441 [Thd =203]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:53:55.441 [Thd =23]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:53:56.053 [Thd =187]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:53:57.442 [Thd =203]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:53:57.442 [Thd =203]  Info Default 聚焦Track已开启
2025-08-03 08:54:02.648 [Thd =228]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:54:02.648 [Thd =228]  Info Default ChangeLightPath: False!
2025-08-03 08:54:02.648 [Thd =228]  Info Default 执行MarkOffSet......
2025-08-03 08:54:02.648 [Thd =206]  Info Default CurrentSize:2048,2048
2025-08-03 08:54:02.648 [Thd =206]  Info Default Camera size no change
2025-08-03 08:54:02.648 [Thd =206]  Info Default Set camera size success
2025-08-03 08:54:02.648 [Thd =206]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:54:03.633 [Thd =206]  Info Default Set camera parameter
2025-08-03 08:54:03.633 [Thd =206]  Info Default TriggerMode is On,dont set
2025-08-03 08:54:03.633 [Thd =206]  Info Default BUFFER_COUNT no change
2025-08-03 08:54:03.636 [Thd =231]  Info strip vectorBegin:(59.449324,72.517513),VectorEnd:(64.754651,72.517513),CaptureBegin:(61.449324,72.517513)，CaptureEnd：(62.754651,72.517513),StepScan:0.435108959268996
2025-08-03 08:54:05.910 [Thd =231]  Info Default m_focusMapMode：0
2025-08-03 08:54:05.911 [Thd =231]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455546518065,BeginPoint:-61.4493242244044,EndPoint:-62.7546511022114
2025-08-03 08:54:06.479 [Thd =31]  Info Default stormCore.MatchTemplate:0.1643782
2025-08-03 08:54:06.479 [Thd =6]  Warn Default Mark offset match score:0.16438
2025-08-03 08:54:06.652 [Thd =231]  Info MMSFocus _isStop = true 
2025-08-03 08:54:07.175 [Thd =191]  Warn Default 还原光源最大功率
2025-08-03 08:54:07.175 [Thd =231]  Info Default LaserLamp MaxPower:300
2025-08-03 08:54:08.186 [Thd =6]  Info Default OpenLamp Transmission
2025-08-03 08:54:08.186 [Thd =217]  Info MMSFocus _isStop = true 
2025-08-03 08:54:08.990 [Thd =246]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:54:09.994 [Thd =6]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:54:09.994 [Thd =6]  Info Default CloseLamp Reflection
2025-08-03 08:54:10.692 [Thd =217]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:54:10.692 [Thd =243]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:54:11.028 [Thd =251]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:54:12.528 [Thd =251]  Error Default SyncSend recv cmd timeout
2025-08-03 08:54:12.695 [Thd =217]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:54:12.695 [Thd =230]  Info Default 聚焦Track已关闭
2025-08-03 08:54:20.224 [Thd =188]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:54:20.845 [Thd =179]  Error Default Mark匹配分值过低或者匹配失败！
2025-08-03 08:54:20.846 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Aborted
2025-08-03 08:54:20.850 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Aborted
2025-08-03 08:54:20.851 [Thd =1]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 08:54:20.852 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 08:54:20.869 [Thd =217]  Info Default Chuck vacuum close
2025-08-03 08:54:21.870 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:54:21.870 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Aborted!CurTaskName:2950
2025-08-03 08:54:21.870 [Thd =164]  Info Default Inspection stop!
2025-08-03 08:54:22.686 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:55:23.541 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:55:23.542 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:55:26.136 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 08:55:26.136 [Thd =1]  Info Default MaskScaleY:1.00000213447915
2025-08-03 08:55:26.136 [Thd =1]  Info Default MaskScaleX:0.999994600104972,Orth_Y_BeforR:0.120499197605735
2025-08-03 08:55:52.723 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 08:55:52.854 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 08:55:52.855 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 08:55:52.855 [Thd =207]  Info Default Start [1/1]
2025-08-03 08:55:52.856 [Thd =245]  Info Default 开始检查！
2025-08-03 08:56:00.280 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 08:56:00.280 [Thd =211]  Info Default 初始化插件
2025-08-03 08:56:00.280 [Thd =23]  Info Default CurrentSize:2048,2048
2025-08-03 08:56:00.280 [Thd =23]  Info Default Camera size no change
2025-08-03 08:56:00.281 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:56:00.281 [Thd =230]  Info Default CurrentSize:2048,2048
2025-08-03 08:56:00.281 [Thd =230]  Info Default Camera size no change
2025-08-03 08:56:00.281 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 08:56:00.281 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 08:56:00.281 [Thd =164]  Info Default 初始化DB目录
2025-08-03 08:56:00.281 [Thd =23]  Info Default Set camera size success
2025-08-03 08:56:00.281 [Thd =23]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 08:56:00.281 [Thd =230]  Info Default Set camera size success
2025-08-03 08:56:00.281 [Thd =230]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:56:00.282 [Thd =231]  Info Default 设置 TDI 相机参数...
2025-08-03 08:56:00.403 [Thd =1]  Info Default deltax_stage 14.9114545202891, deltay_stage:0.
2025-08-03 08:56:00.403 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0415166312006, 57.7553767104942), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:56:00.404 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59979777839006.
2025-08-03 08:56:00.404 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6413144095907, 57.7553767104942), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0415166312006, 57.7553767104942).
2025-08-03 08:56:00.404 [Thd =1]  Info Default located_pos:(69.6413144095907, 57.7553767104942)
2025-08-03 08:56:00.404 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.39973447136.
2025-08-03 08:56:00.404 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3587405134175, 72.6668312399436), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0409939579424, 72.6668312399436).
2025-08-03 08:56:00.404 [Thd =1]  Info Default located_pos:(-62.3587405134175, 72.6668312399436)
2025-08-03 08:56:00.404 [Thd =243]  Info Default 初始化DPU服务器！
2025-08-03 08:56:00.404 [Thd =224]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 08:56:08.510 [Thd =23]  Info Default Set camera parameter
2025-08-03 08:56:08.510 [Thd =23]  Info Default TriggerMode is On,dont set
2025-08-03 08:56:08.510 [Thd =23]  Info Default BUFFER_COUNT no change
2025-08-03 08:56:08.510 [Thd =214]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426295,"ServiceStartTime":"2025\/8\/3 8:53:42","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":3},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:08.511 [Thd =206]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426295,"ServiceStartTime":"2025\/8\/3 8:53:41","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":35,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:08.511 [Thd =161]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426295,"ServiceStartTime":"2025\/8\/3 8:53:41","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:08.511 [Thd =211]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426295,"ServiceStartTime":"2025\/8\/3 8:54:37","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:09.014 [Thd =230]  Info Default Set camera parameter
2025-08-03 08:56:09.014 [Thd =230]  Info Default TriggerMode is On,dont set
2025-08-03 08:56:09.014 [Thd =230]  Info Default BUFFER_COUNT no change
2025-08-03 08:56:11.044 [Thd =164]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426300,"ServiceStartTime":"2025\/8\/3 8:56:08","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:11.045 [Thd =206]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426300,"ServiceStartTime":"2025\/8\/3 8:56:07","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":1,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:11.056 [Thd =217]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426300,"ServiceStartTime":"2025\/8\/3 8:56:07","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:11.074 [Thd =214]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":426300,"ServiceStartTime":"2025\/8\/3 8:57:03","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 08:56:11.523 [Thd =224]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 08:56:11.562 [Thd =1]  Info Default Register inspect event！
2025-08-03 08:56:11.572 [Thd =1]  Info Default initial*****Light_intensity:46, min:10, max:220
2025-08-03 08:56:11.572 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 08:56:11.572 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 08:56:11.572 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3587405134175, reference point Stage_Y: 72.6668312399436, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 08:56:11.572 [Thd =245]  Info Default m_start_strip_no:0
2025-08-03 08:56:11.573 [Thd =245]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 08:56:11.573 [Thd =23]  Info Default 初始化检测数据
2025-08-03 08:56:11.573 [Thd =245]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.084,"m_y_tolerance":-0.116,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,220,3,0,1130102784,1065353216,1065353216,0,40,0],"m_R_collect":[200,201,105,0,1128792064,1065353216,1065353216,0,257,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.172,"m_y_tolerance_R":-0.196,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 08:56:11.577 [Thd =245]  Info Default m_line_camera_cols:321
2025-08-03 08:56:11.577 [Thd =245]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 08:56:11.577 [Thd =245]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 08:56:11.580 [Thd =245]  Info Default SetDistortionPara disaabled
2025-08-03 08:56:11.580 [Thd =245]  Info Default Set distortion correction parameters End
2025-08-03 08:56:11.580 [Thd =245]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 08:56:11.925 [Thd =245]  Info Default InitDie2DBRes Success!!!!
2025-08-03 08:56:15.204 [Thd =1]  Info Default Successful alignment！
2025-08-03 08:56:15.205 [Thd =246]  Info Default 对准完成！
2025-08-03 08:56:15.205 [Thd =214]  Info Default 稍等！设置相机参数中
2025-08-03 08:56:15.205 [Thd =230]  Info Default 注册相机取图
2025-08-03 08:56:15.206 [Thd =23]  Info Default 移动到起始点位
2025-08-03 08:56:15.522 [Thd =233]  Info MMSFocus _isStop = true 
2025-08-03 08:56:15.729 [Thd =233]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435108959268996,StepStep:0.431712923204467,CosValueY:1,SinValueY:0
2025-08-03 08:56:15.729 [Thd =23]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 08:56:15.729 [Thd =233]  Info Default SetMaxPower:300
2025-08-03 08:56:16.731 [Thd =187]  Info Default 打开光源，亮度：46%
2025-08-03 08:56:16.731 [Thd =188]  Info Default OpenLamp Transmission
2025-08-03 08:56:16.760 [Thd =224]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 08:56:17.549 [Thd =245]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:56:18.261 [Thd =224]  Error Default SyncSend recv cmd timeout
2025-08-03 08:56:18.739 [Thd =161]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:56:18.739 [Thd =251]  Info Default 聚焦Track已关闭
2025-08-03 08:56:20.042 [Thd =161]  Info MMSFocus _isStop = true 
2025-08-03 08:56:20.345 [Thd =188]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 08:56:20.345 [Thd =188]  Info Default OpenLamp Reflection
2025-08-03 08:56:21.546 [Thd =161]  Info Default QuerySubstrateMode Line OK 
2025-08-03 08:56:21.546 [Thd =179]  Info Default 已切换到线阵聚焦模式
2025-08-03 08:56:22.152 [Thd =188]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 08:56:23.547 [Thd =161]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 08:56:23.547 [Thd =185]  Info Default 聚焦Track已开启
2025-08-03 08:56:28.754 [Thd =230]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:56:28.754 [Thd =230]  Info Default ChangeLightPath: False!
2025-08-03 08:56:28.754 [Thd =6]  Info Default 执行MarkOffSet......
2025-08-03 08:56:28.754 [Thd =243]  Info Default CurrentSize:2048,2048
2025-08-03 08:56:28.754 [Thd =243]  Info Default Camera size no change
2025-08-03 08:56:28.754 [Thd =243]  Info Default Set camera size success
2025-08-03 08:56:28.754 [Thd =243]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 08:56:29.732 [Thd =243]  Info Default Set camera parameter
2025-08-03 08:56:29.733 [Thd =243]  Info Default TriggerMode is On,dont set
2025-08-03 08:56:29.733 [Thd =243]  Info Default BUFFER_COUNT no change
2025-08-03 08:56:29.736 [Thd =233]  Info strip vectorBegin:(59.449324,72.517513),VectorEnd:(64.754651,72.517513),CaptureBegin:(61.449324,72.517513)，CaptureEnd：(62.754651,72.517513),StepScan:0.435108959268996
2025-08-03 08:56:32.000 [Thd =233]  Info Default m_focusMapMode：0
2025-08-03 08:56:32.002 [Thd =233]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455546518065,BeginPoint:-61.4493242244044,EndPoint:-62.7546511022114
2025-08-03 08:56:32.540 [Thd =31]  Info Default stormCore.MatchTemplate:0.1646075
2025-08-03 08:56:32.540 [Thd =174]  Warn Default Mark offset match score:0.16461
2025-08-03 08:56:32.762 [Thd =233]  Info MMSFocus _isStop = true 
2025-08-03 08:56:33.285 [Thd =203]  Warn Default 还原光源最大功率
2025-08-03 08:56:33.285 [Thd =233]  Info Default LaserLamp MaxPower:300
2025-08-03 08:56:34.287 [Thd =224]  Info MMSFocus _isStop = true 
2025-08-03 08:56:34.287 [Thd =214]  Info Default OpenLamp Transmission
2025-08-03 08:56:35.091 [Thd =185]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:56:36.094 [Thd =214]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:56:36.094 [Thd =214]  Info Default CloseLamp Reflection
2025-08-03 08:56:36.792 [Thd =224]  Info Default QuerySubstrateMode Area OK 
2025-08-03 08:56:36.792 [Thd =191]  Info Default 已切换到面阵聚焦模式
2025-08-03 08:56:37.142 [Thd =206]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 08:56:38.643 [Thd =206]  Error Default SyncSend recv cmd timeout
2025-08-03 08:56:38.794 [Thd =224]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 08:56:38.794 [Thd =179]  Info Default 聚焦Track已关闭
2025-08-03 08:56:46.313 [Thd =231]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 08:56:46.936 [Thd =6]  Error Default Mark匹配分值过低或者匹配失败！
2025-08-03 08:56:46.936 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Aborted
2025-08-03 08:56:46.940 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Aborted
2025-08-03 08:56:46.942 [Thd =1]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 08:56:46.944 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 08:56:46.959 [Thd =217]  Info Default Chuck vacuum close
2025-08-03 08:56:47.960 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 08:56:47.960 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Aborted!CurTaskName:2951
2025-08-03 08:56:47.960 [Thd =224]  Info Default Inspection stop!
2025-08-03 08:56:48.776 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 08:59:12.600 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:59:12.600 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 08:59:44.108 [Thd =161]  Info Default Chuck vacuum close
2025-08-03 08:59:45.108 [Thd =246]  Info Default ChuckVac: :False
2025-08-03 09:03:23.130 [Thd =224]  Info Default Chuck vacuum close
2025-08-03 09:03:24.130 [Thd =188]  Info Default ChuckVac: :False
2025-08-03 09:03:36.451 [Thd =246]  Info Default Chuck vacuum close
2025-08-03 09:03:37.452 [Thd =233]  Info Default ChuckVac: :False
2025-08-03 09:03:49.606 [Thd =224]  Info Default Chuck vacuum close
2025-08-03 09:03:50.607 [Thd =179]  Info Default ChuckVac: :False
2025-08-03 09:06:36.806 [Thd =246]  Info Default Alignment ...
2025-08-03 09:06:36.927 [Thd =245]  Info Default Chuck vacuum close
2025-08-03 09:06:37.928 [Thd =23]  Info Default ChuckVac: :False
2025-08-03 09:06:37.986 [Thd =205]  Info Default Switch light...
2025-08-03 09:06:37.986 [Thd =23]  Info Default OpenLamp Transmission
2025-08-03 09:06:38.790 [Thd =6]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:06:41.601 [Thd =23]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:06:42.103 [Thd =23]  Info Default CloseLamp Reflection
2025-08-03 09:06:44.146 [Thd =23]  Info MMSFocus _isStop = true 
2025-08-03 09:06:44.146 [Thd =188]  Info Default Execute alignment 1/2
2025-08-03 09:06:49.287 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9981131,xOffSet:611,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:06:49.287 [Thd =23]  Info Default D2DMatchMark ******** :errorX:-1,errorY:0
2025-08-03 09:06:49.287 [Thd =23]  Info Default D2DMatchMark ******** :errorX:-1,errorY:0,Successed:True
2025-08-03 09:06:49.411 [Thd =23]  Info Default Flag:Fine1, Position:62.22387805684,73.19779984468
2025-08-03 09:06:59.122 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9987848,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:06:59.122 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:06:59.122 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:06:59.244 [Thd =23]  Info Default Flag:Fine2, Position:-62.17571784352,72.87069542548
2025-08-03 09:07:09.586 [Thd =185]  Info Default Execute alignment 2/2
2025-08-03 09:07:18.903 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9957813,xOffSet:580,yOffSet:521,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:07:18.903 [Thd =23]  Info Default D2DMatchMark ******** :errorX:-32,errorY:9
2025-08-03 09:07:20.546 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9971354,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:07:20.546 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:07:20.670 [Thd =23]  Info Default Flag:Fine1, Position:62.0435113659071,72.6749307823857
2025-08-03 09:07:30.388 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.996285,xOffSet:596,yOffSet:520,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:07:30.388 [Thd =23]  Info Default D2DMatchMark ******** :errorX:-16,errorY:8
2025-08-03 09:07:32.017 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9969131,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:07:32.017 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:07:32.141 [Thd =23]  Info Default Flag:Fine2, Position:-62.3562230385274,72.6702671125542
2025-08-03 09:07:35.074 [Thd =174]  Info Default Checking Mark ...
2025-08-03 09:07:44.390 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9970704,xOffSet:614,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:07:44.390 [Thd =23]  Info Default D2DMatchMark ******** :errorX:2,errorY:0
2025-08-03 09:07:45.995 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.997115,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:07:45.995 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:07:46.118 [Thd =23]  Info Default Flag:Fine1, Position:62.0409674491977,72.6667567997572
2025-08-03 09:07:55.850 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9978295,xOffSet:612,yOffSet:513,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:07:55.850 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:1
2025-08-03 09:07:55.851 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:1,Successed:True
2025-08-03 09:07:55.974 [Thd =23]  Info Default Flag:Fine2, Position:-62.3587670426558,72.6673398998404
2025-08-03 09:08:06.361 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9961352,xOffSet:614,yOffSet:496,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:08:06.361 [Thd =23]  Info Default D2DMatchMark ******** :errorX:2,errorY:-16
2025-08-03 09:08:07.991 [Thd =23]  Info Default D2DSearchMark matchResult:0， score:0.9975027,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:08:07.992 [Thd =23]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:08:08.115 [Thd =23]  Info Default Flag:Fine3, Position:-62.3541022420158,-68.7334236494396
2025-08-03 09:08:09.117 [Thd =23]  Info Default IsAlignAngleOK fine1:62.0409674491977,72.6667567997572,fine2:-62.3587670426558,72.6673398998404
2025-08-03 09:08:09.117 [Thd =211]  Info Default Height difference : 0.20 um 
2025-08-03 09:08:09.117 [Thd =23]  Info Default IsAlignAngleOK delta:-0.00200000001118661.
2025-08-03 09:08:27.282 [Thd =23]  Info MMSFocus _isStop = true 
2025-08-03 09:08:27.282 [Thd =251]  Info Default Alignment finish 
2025-08-03 09:08:27.282 [Thd =230]  Info Default Chuck vacuum open
2025-08-03 09:08:28.282 [Thd =23]  Info Default ChuckVac: :True
2025-08-03 09:08:29.123 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:08:41.126 [Thd =233]  Info Default Chuck vacuum close
2025-08-03 09:08:42.126 [Thd =228]  Info Default ChuckVac: :False
2025-08-03 09:09:23.485 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:09:23.486 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:09:34.703 [Thd =174]  Info Default Chuck vacuum close
2025-08-03 09:09:35.703 [Thd =187]  Info Default ChuckVac: :False
2025-08-03 09:09:45.422 [Thd =1]  Info Default GetMarkPos  offsetX:616,offsety:514
2025-08-03 09:09:47.331 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:09:47.331 [Thd =161]  Info Default Chuck vacuum close
2025-08-03 09:09:48.333 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:09:58.409 [Thd =23]  Info Default Chuck vacuum close
2025-08-03 09:09:59.409 [Thd =246]  Info Default ChuckVac: :False
2025-08-03 09:10:06.262 [Thd =1]  Info Default GetMarkPos  offsetX:614,offsety:514
2025-08-03 09:10:08.845 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:10:08.846 [Thd =217]  Info Default Chuck vacuum close
2025-08-03 09:10:09.847 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:10:20.507 [Thd =231]  Info Default Chuck vacuum close
2025-08-03 09:10:21.508 [Thd =179]  Info Default ChuckVac: :False
2025-08-03 09:10:27.200 [Thd =1]  Info Default GetMarkPos  offsetX:612,offsety:516
2025-08-03 09:10:31.022 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:10:31.022 [Thd =191]  Info Default Chuck vacuum close
2025-08-03 09:10:32.023 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:10:37.872 [Thd =211]  Info Default Alignment ...
2025-08-03 09:10:37.993 [Thd =23]  Info Default Chuck vacuum close
2025-08-03 09:10:38.994 [Thd =161]  Info Default ChuckVac: :False
2025-08-03 09:11:02.791 [Thd =230]  Info Default Switch light...
2025-08-03 09:11:02.791 [Thd =161]  Info Default OpenLamp Transmission
2025-08-03 09:11:03.594 [Thd =203]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:11:06.407 [Thd =161]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:11:06.908 [Thd =161]  Info Default CloseLamp Reflection
2025-08-03 09:11:08.980 [Thd =161]  Info MMSFocus _isStop = true 
2025-08-03 09:11:08.980 [Thd =224]  Info Default Execute alignment 1/2
2025-08-03 09:11:14.151 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.999719,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:11:14.152 [Thd =161]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:11:14.152 [Thd =161]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:11:14.275 [Thd =161]  Info Default Flag:Fine1, Position:62.22329495676,73.19663364452
2025-08-03 09:11:24.006 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9999392,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:11:24.006 [Thd =161]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:11:24.006 [Thd =161]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:11:24.130 [Thd =161]  Info Default Flag:Fine2, Position:-62.1763009436,72.8701123254
2025-08-03 09:11:34.468 [Thd =203]  Info Default Execute alignment 2/2
2025-08-03 09:11:43.769 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9958756,xOffSet:580,yOffSet:520,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:11:43.769 [Thd =161]  Info Default D2DMatchMark ******** :errorX:-32,errorY:8
2025-08-03 09:11:45.429 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9973146,xOffSet:611,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:11:45.429 [Thd =161]  Info Default D2DMatchMark ******** :errorX:-1,errorY:0,Successed:True
2025-08-03 09:11:45.552 [Thd =161]  Info Default Flag:Fine1, Position:62.0435348476273,72.6747135725607
2025-08-03 09:11:55.273 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9969439,xOffSet:595,yOffSet:520,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:11:55.273 [Thd =161]  Info Default D2DMatchMark ******** :errorX:-17,errorY:8
2025-08-03 09:11:56.911 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9974105,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:11:56.911 [Thd =161]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:11:57.035 [Thd =161]  Info Default Flag:Fine2, Position:-62.3564895749777,72.6703414467326
2025-08-03 09:11:59.965 [Thd =243]  Info Default Checking Mark ...
2025-08-03 09:12:09.284 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9972916,xOffSet:613,yOffSet:513,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:12:09.284 [Thd =161]  Info Default D2DMatchMark ******** :errorX:1,errorY:1
2025-08-03 09:12:09.284 [Thd =161]  Info Default D2DMatchMark ******** :errorX:1,errorY:1,Successed:True
2025-08-03 09:12:09.407 [Thd =161]  Info Default Flag:Fine1, Position:62.0411499672363,72.6675972327627
2025-08-03 09:12:19.112 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9974921,xOffSet:613,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:12:19.113 [Thd =161]  Info Default D2DMatchMark ******** :errorX:1,errorY:0
2025-08-03 09:12:19.113 [Thd =161]  Info Default D2DMatchMark ******** :errorX:1,errorY:0,Successed:True
2025-08-03 09:12:19.235 [Thd =161]  Info Default Flag:Fine2, Position:-62.3588745321994,72.6675972327654
2025-08-03 09:12:29.628 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9955032,xOffSet:614,yOffSet:493,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:12:29.628 [Thd =161]  Info Default D2DMatchMark ******** :errorX:2,errorY:-19
2025-08-03 09:12:31.266 [Thd =161]  Info Default D2DSearchMark matchResult:0， score:0.9973345,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:12:31.266 [Thd =161]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:12:31.390 [Thd =161]  Info Default Flag:Fine3, Position:-62.3533350814394,-68.7325832164346
2025-08-03 09:12:32.391 [Thd =161]  Info Default IsAlignAngleOK fine1:62.0411499672363,72.6675972327627,fine2:-62.3588745321994,72.6675972327654
2025-08-03 09:12:32.391 [Thd =230]  Info Default Height difference : 0.10 um 
2025-08-03 09:12:32.391 [Thd =161]  Info Default IsAlignAngleOK delta:-9.26105993979072E-12.
2025-08-03 09:12:51.154 [Thd =161]  Info MMSFocus _isStop = true 
2025-08-03 09:12:51.154 [Thd =179]  Info Default Alignment finish 
2025-08-03 09:12:51.154 [Thd =233]  Info Default Chuck vacuum open
2025-08-03 09:12:52.159 [Thd =161]  Info Default ChuckVac: :True
2025-08-03 09:12:53.012 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:12:57.631 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:12:57.631 [Thd =1]  Info Default MaskScaleY:0.999999803059238
2025-08-03 09:12:57.631 [Thd =1]  Info Default MaskScaleX:0.999998723840384,Orth_Y_BeforR:0.134676129170957
2025-08-03 09:12:59.844 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:13:33.483 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:13:33.483 [Thd =1]  Info Default MaskScaleY:0.999999803059238
2025-08-03 09:13:33.483 [Thd =1]  Info Default MaskScaleX:0.999998723840384,Orth_Y_BeforR:0.134676129170957
2025-08-03 09:13:43.407 [Thd =1]  Info Default CDdefectResolution is 0.2
2025-08-03 09:13:43.407 [Thd =1]  Info Default CDdefectResolutionBil is 0.25
2025-08-03 09:13:43.407 [Thd =1]  Info Default PHdefectResolution is 0.2
2025-08-03 09:13:56.146 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 09:13:56.195 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 09:13:56.196 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 09:13:56.196 [Thd =179]  Info Default Start [1/1]
2025-08-03 09:13:56.201 [Thd =174]  Info Default 开始检查！
2025-08-03 09:14:04.392 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 09:14:04.392 [Thd =164]  Info Default 初始化插件
2025-08-03 09:14:04.392 [Thd =185]  Info Default CurrentSize:2048,2048
2025-08-03 09:14:04.392 [Thd =185]  Info Default Camera size no change
2025-08-03 09:14:04.393 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 09:14:04.393 [Thd =217]  Info Default 初始化DB目录
2025-08-03 09:14:04.393 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 09:14:04.393 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 09:14:04.394 [Thd =185]  Info Default Set camera size success
2025-08-03 09:14:04.394 [Thd =185]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:14:04.395 [Thd =214]  Info Default CurrentSize:2048,2048
2025-08-03 09:14:04.395 [Thd =214]  Info Default Camera size no change
2025-08-03 09:14:04.395 [Thd =233]  Info Default 设置 TDI 相机参数...
2025-08-03 09:14:04.395 [Thd =214]  Info Default Set camera size success
2025-08-03 09:14:04.395 [Thd =214]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 09:14:04.515 [Thd =1]  Info Default deltax_stage 14.9113930293176, deltay_stage:0.
2025-08-03 09:14:04.516 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0417341314661, 57.7562041920025), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0411499672363, 72.6675972327627).
2025-08-03 09:14:04.516 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59981549671346.
2025-08-03 09:14:04.517 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6415496281796, 57.7562041920025), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0417341314661, 57.7562041920025).
2025-08-03 09:14:04.517 [Thd =1]  Info Default located_pos:(69.6415496281796, 57.7562041920025)
2025-08-03 09:14:04.517 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.400024499436.
2025-08-03 09:14:04.517 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3588745321994, 72.6675972327627), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0411499672363, 72.6675972327627).
2025-08-03 09:14:04.517 [Thd =1]  Info Default located_pos:(-62.3588745321994, 72.6675972327627)
2025-08-03 09:14:04.517 [Thd =228]  Info Default 初始化DPU服务器！
2025-08-03 09:14:04.517 [Thd =243]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 09:14:11.954 [Thd =211]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427014,"ServiceStartTime":"2025\/8\/3 8:56:08","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:11.955 [Thd =228]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427014,"ServiceStartTime":"2025\/8\/3 8:56:07","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:11.955 [Thd =228]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427014,"ServiceStartTime":"2025\/8\/3 8:56:07","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":35,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:11.956 [Thd =233]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427014,"ServiceStartTime":"2025\/8\/3 8:57:03","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:12.458 [Thd =214]  Info Default Set camera parameter
2025-08-03 09:14:12.459 [Thd =214]  Info Default TriggerMode is On,dont set
2025-08-03 09:14:12.459 [Thd =214]  Info Default BUFFER_COUNT no change
2025-08-03 09:14:12.962 [Thd =185]  Info Default Set camera parameter
2025-08-03 09:14:12.962 [Thd =185]  Info Default TriggerMode is On,dont set
2025-08-03 09:14:12.962 [Thd =185]  Info Default BUFFER_COUNT no change
2025-08-03 09:14:14.493 [Thd =245]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427019,"ServiceStartTime":"2025\/8\/3 9:14:11","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:14.494 [Thd =179]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427019,"ServiceStartTime":"2025\/8\/3 9:14:11","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":1,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:14.496 [Thd =251]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427019,"ServiceStartTime":"2025\/8\/3 9:14:10","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:14.513 [Thd =231]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427019,"ServiceStartTime":"2025\/8\/3 9:15:07","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:14:14.968 [Thd =243]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 09:14:15.002 [Thd =1]  Info Default Register inspect event！
2025-08-03 09:14:15.020 [Thd =1]  Info Default initial*****Light_intensity:46, min:10, max:220
2025-08-03 09:14:15.020 [Thd =214]  Info Default 初始化检测数据
2025-08-03 09:14:15.021 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 09:14:15.021 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 09:14:15.021 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3588745321994, reference point Stage_Y: 72.6675972327627, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 09:14:15.021 [Thd =207]  Info Default m_start_strip_no:0
2025-08-03 09:14:15.021 [Thd =207]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 09:14:15.021 [Thd =207]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.084,"m_y_tolerance":-0.116,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,220,3,0,1130102784,1065353216,1065353216,0,40,0],"m_R_collect":[200,201,105,0,1128792064,1065353216,1065353216,0,257,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.172,"m_y_tolerance_R":-0.196,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 09:14:15.022 [Thd =207]  Info Default m_line_camera_cols:321
2025-08-03 09:14:15.022 [Thd =207]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 09:14:15.023 [Thd =207]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 09:14:15.026 [Thd =207]  Info Default SetDistortionPara disaabled
2025-08-03 09:14:15.027 [Thd =207]  Info Default Set distortion correction parameters End
2025-08-03 09:14:15.027 [Thd =207]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 09:14:17.817 [Thd =207]  Info Default InitDie2DBRes Success!!!!
2025-08-03 09:14:18.021 [Thd =1]  Info Default Successful alignment！
2025-08-03 09:14:18.022 [Thd =206]  Info Default 对准完成！
2025-08-03 09:14:18.022 [Thd =23]  Info Default 稍等！设置相机参数中
2025-08-03 09:14:18.022 [Thd =164]  Info Default 移动到起始点位
2025-08-03 09:14:18.022 [Thd =187]  Info Default 注册相机取图
2025-08-03 09:14:18.967 [Thd =205]  Info MMSFocus _isStop = true 
2025-08-03 09:14:19.170 [Thd =205]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.43510997369089,StepStep:0.431711142932327,CosValueY:1,SinValueY:0
2025-08-03 09:14:19.170 [Thd =205]  Info Default SetMaxPower:300
2025-08-03 09:14:19.171 [Thd =203]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 09:14:20.171 [Thd =174]  Info Default 打开光源，亮度：46%
2025-08-03 09:14:20.171 [Thd =214]  Info Default OpenLamp Transmission
2025-08-03 09:14:20.185 [Thd =188]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:14:20.975 [Thd =246]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:14:21.686 [Thd =188]  Error Default SyncSend recv cmd timeout
2025-08-03 09:14:22.173 [Thd =187]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:14:22.173 [Thd =185]  Info Default 聚焦Track已关闭
2025-08-03 09:14:23.476 [Thd =187]  Info MMSFocus _isStop = true 
2025-08-03 09:14:23.786 [Thd =214]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:14:23.786 [Thd =214]  Info Default OpenLamp Reflection
2025-08-03 09:14:24.985 [Thd =187]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:14:24.985 [Thd =161]  Info Default 已切换到线阵聚焦模式
2025-08-03 09:14:25.603 [Thd =214]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:14:26.986 [Thd =187]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 09:14:26.986 [Thd =187]  Info Default 聚焦Track已开启
2025-08-03 09:14:32.187 [Thd =224]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:14:32.187 [Thd =224]  Info Default ChangeLightPath: False!
2025-08-03 09:14:32.187 [Thd =228]  Info Default 执行MarkOffSet......
2025-08-03 09:14:32.187 [Thd =188]  Info Default CurrentSize:2048,2048
2025-08-03 09:14:32.187 [Thd =188]  Info Default Camera size no change
2025-08-03 09:14:32.187 [Thd =188]  Info Default Set camera size success
2025-08-03 09:14:32.188 [Thd =188]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:14:33.166 [Thd =188]  Info Default Set camera parameter
2025-08-03 09:14:33.166 [Thd =188]  Info Default TriggerMode is On,dont set
2025-08-03 09:14:33.166 [Thd =188]  Info Default BUFFER_COUNT no change
2025-08-03 09:14:33.169 [Thd =205]  Info strip vectorBegin:(59.449478,72.518279),VectorEnd:(64.754808,72.518279),CaptureBegin:(61.449478,72.518279)，CaptureEnd：(62.754808,72.518279),StepScan:0.43510997369089
2025-08-03 09:14:38.893 [Thd =205]  Info Default m_focusMapMode：0
2025-08-03 09:14:38.895 [Thd =205]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456041841255,BeginPoint:-61.4494782048545,EndPoint:-62.7548081259272
2025-08-03 09:14:39.515 [Thd =31]  Info Default stormCore.MatchTemplate:0.1655255
2025-08-03 09:14:39.516 [Thd =211]  Warn Default Mark offset match score:0.16553
2025-08-03 09:14:40.195 [Thd =205]  Info MMSFocus _isStop = true 
2025-08-03 09:14:40.719 [Thd =251]  Warn Default 还原光源最大功率
2025-08-03 09:14:40.719 [Thd =205]  Info Default LaserLamp MaxPower:300
2025-08-03 09:14:41.720 [Thd =207]  Info MMSFocus _isStop = true 
2025-08-03 09:14:41.720 [Thd =217]  Info Default OpenLamp Transmission
2025-08-03 09:14:42.523 [Thd =233]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:14:43.527 [Thd =217]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:14:43.527 [Thd =217]  Info Default CloseLamp Reflection
2025-08-03 09:14:44.224 [Thd =207]  Info Default QuerySubstrateMode Area OK 
2025-08-03 09:14:44.224 [Thd =211]  Info Default 已切换到面阵聚焦模式
2025-08-03 09:14:44.554 [Thd =251]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:14:46.056 [Thd =251]  Error Default SyncSend recv cmd timeout
2025-08-03 09:14:46.226 [Thd =207]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:14:46.226 [Thd =228]  Info Default 聚焦Track已关闭
2025-08-03 09:14:53.754 [Thd =224]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:14:58.483 [Thd =207]  Error Default Mark匹配分值过低或者匹配失败！
2025-08-03 09:14:58.483 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Aborted
2025-08-03 09:14:58.487 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Aborted
2025-08-03 09:14:58.489 [Thd =1]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 09:14:58.490 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 09:14:58.524 [Thd =179]  Info Default Chuck vacuum close
2025-08-03 09:14:59.525 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:14:59.525 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Aborted!CurTaskName:2952
2025-08-03 09:14:59.525 [Thd =233]  Info Default Inspection stop!
2025-08-03 09:15:00.341 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:15:48.557 [Thd =228]  Error Default EFEM is ready
2025-08-03 09:15:48.558 [Thd =203]  Info Default EFEM is ready
2025-08-03 09:18:13.149 [Thd =246]  Error Default EFEM is ready
2025-08-03 09:18:13.149 [Thd =191]  Info Default EFEM is ready
2025-08-03 09:18:48.454 [Thd =161]  Error Default EFEM is ready
2025-08-03 09:18:48.454 [Thd =251]  Info Default EFEM is ready
2025-08-03 09:20:21.972 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.Views.UCSetupMainMethodName:SelectProductSetup After Memory usage:28197.22MB VirtualMemorySize:200.6 GB
2025-08-03 09:20:29.500 [Thd =1]  Error Default SetProductSetup start
2025-08-03 09:20:29.538 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:20:29.538 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:20:31.723 [Thd =191]  Info MMSFocus _isStop = true 
2025-08-03 09:20:31.766 [Thd =191]  Info Default IKAP  Start of stream
2025-08-03 09:20:31.766 [Thd =191]  Info Default Preview Camera StartSnap
2025-08-03 09:20:31.806 [Thd =191]  Info Default IKAP End of stream
2025-08-03 09:20:31.806 [Thd =191]  Info Default Preview Camera StopSnap
2025-08-03 09:20:31.894 [Thd =191]  Info Default IKAP  Start of stream
2025-08-03 09:20:31.894 [Thd =191]  Info Default Preview Camera StartSnap
2025-08-03 09:20:31.902 [Thd =191]  Info Default camera_line StartTrigger
2025-08-03 09:20:33.255 [Thd =191]  Info Default m_focusMapMode：0
2025-08-03 09:20:33.257 [Thd =191]  Info Default Axis Y:5,PulseWidth:0.002,TriggerDistance:0.082975679542,BeginPoint:-175,EndPoint:0
2025-08-03 09:20:43.486 [Thd =191]  Info Default IKAP End of stream
2025-08-03 09:20:43.486 [Thd =191]  Info Default Preview Camera StopSnap
2025-08-03 09:20:44.190 [Thd =191]  Info Default RefLamp Rise: True!
2025-08-03 09:20:51.399 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:20:51.400 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:21:00.001 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:21:00.001 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:21:07.207 [Thd =191]  Info Default Chuck vacuum close
2025-08-03 09:21:08.207 [Thd =174]  Info Default ChuckVac: :False
2025-08-03 09:21:14.725 [Thd =1]  Info Default GetMarkPos  offsetX:686,offsety:342
2025-08-03 09:21:17.123 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:21:17.123 [Thd =206]  Info Default Chuck vacuum close
2025-08-03 09:21:18.124 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:21:29.186 [Thd =191]  Info Default Chuck vacuum close
2025-08-03 09:21:30.187 [Thd =251]  Info Default ChuckVac: :False
2025-08-03 09:21:34.969 [Thd =1]  Info Default GetMarkPos  offsetX:1102,offsety:341
2025-08-03 09:21:38.999 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:21:38.999 [Thd =214]  Info Default Chuck vacuum close
2025-08-03 09:21:40.000 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:21:53.566 [Thd =217]  Info Default Chuck vacuum close
2025-08-03 09:21:54.566 [Thd =228]  Info Default ChuckVac: :False
2025-08-03 09:22:07.779 [Thd =1]  Info Default GetMarkPos  offsetX:614,offsety:297
2025-08-03 09:22:15.450 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:22:15.450 [Thd =231]  Info Default Chuck vacuum close
2025-08-03 09:22:16.451 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:22:21.924 [Thd =214]  Info Default Alignment ...
2025-08-03 09:22:22.044 [Thd =251]  Info Default Chuck vacuum close
2025-08-03 09:22:23.046 [Thd =164]  Info Default ChuckVac: :False
2025-08-03 09:22:32.716 [Thd =243]  Info Default Switch light...
2025-08-03 09:22:32.716 [Thd =164]  Info Default OpenLamp Transmission
2025-08-03 09:22:33.519 [Thd =245]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:22:36.332 [Thd =164]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:22:36.833 [Thd =164]  Info Default CloseLamp Reflection
2025-08-03 09:22:38.398 [Thd =164]  Info MMSFocus _isStop = true 
2025-08-03 09:22:38.398 [Thd =214]  Info Default Execute alignment 1/2
2025-08-03 09:22:43.533 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9997267,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:22:43.533 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:22:43.533 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:22:43.657 [Thd =164]  Info Default Flag:Fine1, Position:62.2235865068,73.21500129704
2025-08-03 09:22:53.378 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9999149,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:22:53.378 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:22:53.378 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:22:53.501 [Thd =164]  Info Default Flag:Fine2, Position:-62.17630094316,72.9030574804
2025-08-03 09:23:03.504 [Thd =6]  Info Default Execute alignment 2/2
2025-08-03 09:23:12.796 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9973309,xOffSet:582,yOffSet:520,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:23:12.796 [Thd =164]  Info Default D2DMatchMark ******** :errorX:-30,errorY:8
2025-08-03 09:23:14.435 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.997744,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:23:14.435 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:23:14.558 [Thd =164]  Info Default Flag:Fine1, Position:62.0518238161339,72.7161859994957
2025-08-03 09:23:24.271 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9967229,xOffSet:596,yOffSet:520,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:23:24.271 [Thd =164]  Info Default D2DMatchMark ******** :errorX:-16,errorY:8
2025-08-03 09:23:25.921 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9969081,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:23:25.921 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:23:26.044 [Thd =164]  Info Default Flag:Fine2, Position:-62.3484547466871,72.712105279683
2025-08-03 09:23:28.974 [Thd =187]  Info Default Checking Mark ...
2025-08-03 09:23:38.283 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9967453,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:23:38.283 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:23:38.283 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:23:38.405 [Thd =164]  Info Default Flag:Fine1, Position:62.049599262858,72.7095437037533
2025-08-03 09:23:48.130 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9975477,xOffSet:612,yOffSet:511,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:23:48.131 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:-1
2025-08-03 09:23:48.131 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:-1,Successed:True
2025-08-03 09:23:48.256 [Thd =164]  Info Default Flag:Fine2, Position:-62.3506793668932,72.7095437037555
2025-08-03 09:23:58.638 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.9948919,xOffSet:614,yOffSet:489,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:23:58.638 [Thd =164]  Info Default D2DMatchMark ******** :errorX:2,errorY:-23
2025-08-03 09:24:00.279 [Thd =164]  Info Default D2DSearchMark matchResult:0， score:0.997737,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:24:00.279 [Thd =164]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:24:00.401 [Thd =164]  Info Default Flag:Fine3, Position:-62.3439737159732,-68.6915113958045
2025-08-03 09:24:01.403 [Thd =164]  Info Default IsAlignAngleOK fine1:62.049599262858,72.7095437037533,fine2:-62.3506793668932,72.7095437037555
2025-08-03 09:24:01.403 [Thd =205]  Info Default Height difference : 0.20 um 
2025-08-03 09:24:01.403 [Thd =164]  Info Default IsAlignAngleOK delta:-7.50633279330405E-12.
2025-08-03 09:24:19.547 [Thd =164]  Info MMSFocus _isStop = true 
2025-08-03 09:24:19.547 [Thd =251]  Info Default Alignment finish 
2025-08-03 09:24:19.547 [Thd =23]  Info Default Chuck vacuum open
2025-08-03 09:24:20.549 [Thd =164]  Info Default ChuckVac: :True
2025-08-03 09:24:21.482 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:24:39.315 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:24:39.316 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:24:45.750 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 09:24:54.656 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 09:24:56.813 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 09:24:59.900 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:25:08.049 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:25:08.069 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:25:08.069 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:25:08.069 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:25:08.070 [Thd =23]  Info Default located_pos:(62.049599262858, 72.7095437037533)
2025-08-03 09:25:08.070 [Thd =23]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:25:08.070 [Thd =23]  Info Default MoveStageForMarkCol102 point (-62.3506793668932, 72.7095437037533), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:25:08.070 [Thd =23]  Info Default located_pos:(-62.3506793668932, 72.7095437037533)
2025-08-03 09:25:08.070 [Thd =23]  Info Default deltax_stage 141.40105509956, deltay_stage:0.
2025-08-03 09:25:08.070 [Thd =23]  Info Default MoveStageForMarkCol101 point (62.0563049137855, -68.6915115548074), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:25:08.070 [Thd =23]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:25:08.070 [Thd =23]  Info Default MoveStageForMarkCol102 point (-62.3439737159657, -68.6915115548074), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0563049137855, -68.6915115548074).
2025-08-03 09:25:08.070 [Thd =23]  Info Default located_pos:(-62.3439737159657, -68.6915115548074)
2025-08-03 09:25:08.070 [Thd =23]  Info Default AliPt:(62.049599262858, 72.7095437037533), GDS2StagePt:(62.049599262858, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:25:08.070 [Thd =23]  Info Default AliPt:(-62.3506793668932, 72.7095437037555), GDS2StagePt:(-62.3506793668932, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:25:08.071 [Thd =23]  Info Default AliPt:(-62.3439737159732, -68.6915113958045), GDS2StagePt:(-62.3439737159657, -68.6915115548074), XOffset:5, YOffset:5
2025-08-03 09:25:08.080 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:25:08.080 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:25:08.080 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:25:08.081 [Thd =1]  Info Default deltax_stage 14.9114852658002, deltay_stage:0.
2025-08-03 09:25:08.081 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503064090312, 57.7980584211857), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:25:08.081 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59983102197977.
2025-08-03 09:25:08.081 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.650137431011, 57.7980584211857), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503064090312, 57.7980584211857).
2025-08-03 09:25:08.081 [Thd =1]  Info Default located_pos:(69.650137431011, 57.7980584211857)
2025-08-03 09:25:08.081 [Thd =1]  Info Default deltax_stage 126.459016605779, deltay_stage:0.
2025-08-03 09:25:08.081 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.055596318689, -53.7494730442248), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:25:08.081 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.986678621648.
2025-08-03 09:25:08.081 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9310823029593, -53.7494730442248), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.055596318689, -53.7494730442248).
2025-08-03 09:25:08.081 [Thd =1]  Info Default located_pos:(-69.9310823029593, -53.7494730442248)
2025-08-03 09:25:11.424 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:25:11.628 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:25:51.473 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:28459.84MB VirtualMemorySize:200.5 GB
2025-08-03 09:25:51.597 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 09:25:51.597 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 09:25:51.679 [Thd =179]  Info Default 设置光标定环境中，请等待......
2025-08-03 09:25:51.679 [Thd =6]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 09:25:51.680 [Thd =6]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:25:51.681 [Thd =6]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:25:51.683 [Thd =6]  Info Default SetDistortionPara disaabled
2025-08-03 09:25:52.454 [Thd =6]  Info MMSFocus _isStop = true 
2025-08-03 09:25:52.454 [Thd =6]  Info Default aSwitchIndex index:0
2025-08-03 09:25:52.454 [Thd =6]  Info Default lens from ATF:
2025-08-03 09:25:52.454 [Thd =6]  Info Default objCount:3
2025-08-03 09:25:52.454 [Thd =6]  Info Default ratio:P200;objId:0
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:P140;objId:1
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:P100;objId:2
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:25:52.455 [Thd =6]  Info Default lens from system settings:
2025-08-03 09:25:52.455 [Thd =6]  Info Default systemlensettings lens count:3
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:P200;objId:0
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:P140;objId:1
2025-08-03 09:25:52.455 [Thd =6]  Info Default ratio:P100;objId:2
2025-08-03 09:25:52.458 [Thd =6]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 09:25:52.490 [Thd =6]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 09:25:52.493 [Thd =6]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 09:25:52.493 [Thd =6]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 09:25:52.493 [Thd =6]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 09:25:52.494 [Thd =6]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 09:25:52.494 [Thd =6]  Info Default BaseScanObjectLine:------------------
2025-08-03 09:25:52.494 [Thd =6]  Info Default BaseScanObjectLine:*****************
2025-08-03 09:25:52.494 [Thd =6]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 09:25:52.494 [Thd =6]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.43511086255434,StepStep:0.431713813341271,CosValueY:1,SinValueY:0
2025-08-03 09:25:52.740 [Thd =6]  Info strip vectorBegin:(6.42618,5.047685),VectorEnd:(1.120847,5.047685),CaptureBegin:(4.42618,5.047685)，CaptureEnd：(3.120847,5.047685),StepScan:0.43511086255434
2025-08-03 09:25:52.740 [Thd =6]  Info Default VectorBegin:(6.42617950844988,5.04768456901353)
2025-08-03 09:25:53.971 [Thd =231]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 09:25:53.971 [Thd =6]  Info Default SetMaxPower:300
2025-08-03 09:25:54.972 [Thd =214]  Info Default 打开光源，亮度：42%
2025-08-03 09:25:54.972 [Thd =185]  Info Default OpenLamp Transmission
2025-08-03 09:25:55.017 [Thd =243]  Info Default LaserLamp MaxPower:300,currentPower:126
2025-08-03 09:25:55.788 [Thd =233]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:25:56.518 [Thd =243]  Error Default SyncSend recv cmd timeout
2025-08-03 09:25:56.974 [Thd =6]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:25:56.974 [Thd =188]  Info Default 聚焦Track已关闭
2025-08-03 09:25:58.462 [Thd =6]  Info MMSFocus _isStop = true 
2025-08-03 09:25:58.594 [Thd =185]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:25:58.594 [Thd =185]  Info Default OpenLamp Reflection
2025-08-03 09:25:59.966 [Thd =6]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:25:59.966 [Thd =188]  Info Default 已切换到线阵聚焦模式
2025-08-03 09:26:00.400 [Thd =185]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:26:02.968 [Thd =6]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 09:26:02.968 [Thd =224]  Info Default 聚焦Track已开启
2025-08-03 09:26:06.981 [Thd =206]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:26:06.981 [Thd =206]  Info Default ChangeLightPath: False!
2025-08-03 09:26:06.981 [Thd =164]  Info Default 标定中，请等待......
2025-08-03 09:26:06.981 [Thd =246]  Info Default CurrentSize:2048,2048
2025-08-03 09:26:06.981 [Thd =246]  Info Default Camera size no change
2025-08-03 09:26:06.981 [Thd =211]  Info Default CurrentSize:2048,2048
2025-08-03 09:26:06.981 [Thd =211]  Info Default Camera size no change
2025-08-03 09:26:06.981 [Thd =246]  Info Default Set camera size success
2025-08-03 09:26:06.982 [Thd =246]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 09:26:07.456 [Thd =211]  Info Default Set camera size success
2025-08-03 09:26:07.456 [Thd =211]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:26:07.960 [Thd =246]  Info Default Set camera parameter
2025-08-03 09:26:07.961 [Thd =246]  Info Default TriggerMode is On,dont set
2025-08-03 09:26:07.961 [Thd =246]  Info Default BUFFER_COUNT no change
2025-08-03 09:26:08.938 [Thd =211]  Info Default Set camera parameter
2025-08-03 09:26:08.938 [Thd =211]  Info Default TriggerMode is On,dont set
2025-08-03 09:26:08.938 [Thd =211]  Info Default BUFFER_COUNT no change
2025-08-03 09:26:08.943 [Thd =6]  Info Default scanStrips:1,LampResult:42
2025-08-03 09:26:08.943 [Thd =6]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 09:26:08.943 [Thd =6]  Info Default strip.VectorBegin.X:6.42617950844988,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:08.986 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:26:08.987 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42617950844988,EndPoint:-3.12084692078686
2025-08-03 09:26:08.988 [Thd =6]  Info Default strip.VectorBegin.X:1.12084692078686,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:09.199 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:09.204 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:10.057 [Thd =6]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 09:26:10.057 [Thd =6]  Info Default strip.VectorBegin.X:6.42617950844988,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:10.078 [Thd =228]  Info Default LaserLamp MaxPower:300,currentPower:123
2025-08-03 09:26:10.478 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:26:10.480 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42617950844988,EndPoint:-3.12084692078686
2025-08-03 09:26:10.480 [Thd =6]  Info Default strip.VectorBegin.X:1.12084692078686,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:10.691 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:10.695 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:11.547 [Thd =6]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 09:26:11.547 [Thd =6]  Info Default strip.VectorBegin.X:6.42617950844988,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:11.579 [Thd =228]  Error Default SyncSend recv cmd timeout
2025-08-03 09:26:11.595 [Thd =207]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-08-03 09:26:11.963 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:26:11.965 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42617950844988,EndPoint:-3.12084692078686
2025-08-03 09:26:11.965 [Thd =6]  Info Default strip.VectorBegin.X:1.12084692078686,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:12.178 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:12.181 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:13.034 [Thd =6]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 09:26:13.083 [Thd =6]  Info Default AutoLightReturn:48,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 09:26:13.083 [Thd =6]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 09:26:13.083 [Thd =6]  Info Default strip.VectorBegin.X:6.42617950844988,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:13.095 [Thd =207]  Error Default SyncSend recv cmd timeout
2025-08-03 09:26:13.128 [Thd =203]  Info Default LaserLamp MaxPower:300,currentPower:144
2025-08-03 09:26:13.509 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:26:13.511 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42617950844988,EndPoint:-3.12084692078686
2025-08-03 09:26:13.511 [Thd =6]  Info Default strip.VectorBegin.X:1.12084692078686,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:13.724 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:13.727 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:14.580 [Thd =6]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 09:26:14.580 [Thd =6]  Info Default strip.VectorBegin.X:6.42617950844988,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:14.630 [Thd =203]  Error Default SyncSend recv cmd timeout
2025-08-03 09:26:14.646 [Thd =243]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 09:26:15.001 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:26:15.002 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42617950844988,EndPoint:-3.12084692078686
2025-08-03 09:26:15.003 [Thd =6]  Info Default strip.VectorBegin.X:1.12084692078686,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:15.216 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:15.220 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:16.076 [Thd =6]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 09:26:16.076 [Thd =6]  Info Default strip.VectorBegin.X:6.42617950844988,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:16.147 [Thd =243]  Error Default SyncSend recv cmd timeout
2025-08-03 09:26:16.179 [Thd =207]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:26:16.497 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:26:16.498 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42617950844988,EndPoint:-3.12084692078686
2025-08-03 09:26:16.498 [Thd =6]  Info Default strip.VectorBegin.X:1.12084692078686,strip.VectorBegin.Y:5.04768456901353
2025-08-03 09:26:16.711 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:16.715 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:17.566 [Thd =6]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 09:26:17.606 [Thd =6]  Info Default AutoLightReturn:47,trans_result:0,ref_result:4，stripsIndex：0,scanStrips.Count:1
2025-08-03 09:26:17.606 [Thd =6]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:17.606 [Thd =6]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:17.606 [Thd =6]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:17.606 [Thd =6]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:17.681 [Thd =207]  Error Default SyncSend recv cmd timeout
2025-08-03 09:26:17.808 [Thd =6]  Info Default Light Complete 5,ResultMessge:结果:47,下调反射光台阶数
2025-08-03 09:26:17.854 [Thd =6]  Warn Default 还原光源最大功率
2025-08-03 09:26:17.855 [Thd =203]  Info Default LaserLamp MaxPower:300
2025-08-03 09:26:18.856 [Thd =233]  Info Default OpenLamp Transmission
2025-08-03 09:26:18.976 [Thd =191]  Info MMSFocus _isStop = true 
2025-08-03 09:26:19.667 [Thd =187]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:26:20.663 [Thd =233]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:26:20.663 [Thd =233]  Info Default CloseLamp Reflection
2025-08-03 09:26:21.481 [Thd =191]  Info Default QuerySubstrateMode Area OK 
2025-08-03 09:26:21.481 [Thd =174]  Info Default 已切换到面阵聚焦模式
2025-08-03 09:26:21.700 [Thd =161]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:26:23.202 [Thd =161]  Error Default SyncSend recv cmd timeout
2025-08-03 09:26:23.483 [Thd =191]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:26:23.483 [Thd =217]  Info Default 聚焦Track已关闭
2025-08-03 09:26:30.872 [Thd =245]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:26:30.910 [Thd =203]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:28542.28MB VirtualMemorySize:200.5 GB
2025-08-03 09:26:35.741 [Thd =244]  Info Default m_bIdel
2025-08-03 09:26:36.742 [Thd =34]  Error Default ReadDeviceCmd failed.
2025-08-03 09:26:47.377 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:28635.85MB VirtualMemorySize:200.5 GB
2025-08-03 09:26:47.501 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 09:26:47.501 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 09:26:47.574 [Thd =233]  Info Default 设置光标定环境中，请等待......
2025-08-03 09:26:47.575 [Thd =179]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 09:26:47.575 [Thd =179]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:47.575 [Thd =179]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:26:47.579 [Thd =179]  Info Default SetDistortionPara disaabled
2025-08-03 09:26:47.884 [Thd =179]  Info MMSFocus _isStop = true 
2025-08-03 09:26:47.884 [Thd =179]  Info Default aSwitchIndex index:0
2025-08-03 09:26:47.884 [Thd =179]  Info Default lens from ATF:
2025-08-03 09:26:47.884 [Thd =179]  Info Default objCount:3
2025-08-03 09:26:47.884 [Thd =179]  Info Default ratio:P200;objId:0
2025-08-03 09:26:47.884 [Thd =179]  Info Default ratio:P140;objId:1
2025-08-03 09:26:47.884 [Thd =179]  Info Default ratio:P100;objId:2
2025-08-03 09:26:47.884 [Thd =179]  Info Default ratio:;objId:0
2025-08-03 09:26:47.884 [Thd =179]  Info Default ratio:;objId:0
2025-08-03 09:26:47.885 [Thd =179]  Info Default ratio:;objId:0
2025-08-03 09:26:47.885 [Thd =179]  Info Default ratio:;objId:0
2025-08-03 09:26:47.885 [Thd =179]  Info Default ratio:;objId:0
2025-08-03 09:26:47.885 [Thd =179]  Info Default lens from system settings:
2025-08-03 09:26:47.885 [Thd =179]  Info Default systemlensettings lens count:3
2025-08-03 09:26:47.885 [Thd =179]  Info Default ratio:P200;objId:0
2025-08-03 09:26:47.885 [Thd =179]  Info Default ratio:P140;objId:1
2025-08-03 09:26:47.885 [Thd =179]  Info Default ratio:P100;objId:2
2025-08-03 09:26:47.888 [Thd =179]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 09:26:47.935 [Thd =179]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 09:26:47.939 [Thd =179]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 09:26:47.939 [Thd =179]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 09:26:47.939 [Thd =179]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 09:26:47.939 [Thd =179]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 09:26:47.939 [Thd =179]  Info Default BaseScanObjectLine:------------------
2025-08-03 09:26:47.939 [Thd =179]  Info Default BaseScanObjectLine:*****************
2025-08-03 09:26:47.939 [Thd =179]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 09:26:47.940 [Thd =179]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.43511086255434,StepStep:0.431713813341271,CosValueY:1,SinValueY:0
2025-08-03 09:26:48.186 [Thd =179]  Info strip vectorBegin:(6.425013,5.031649),VectorEnd:(1.119681,5.031649),CaptureBegin:(4.425013,5.031649)，CaptureEnd：(3.119681,5.031649),StepScan:0.43511086255434
2025-08-03 09:26:48.187 [Thd =179]  Info Default VectorBegin:(6.42501330844988,5.03164931601353)
2025-08-03 09:26:49.415 [Thd =206]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 09:26:49.415 [Thd =179]  Info Default SetMaxPower:300
2025-08-03 09:26:50.416 [Thd =205]  Info Default 打开光源，亮度：47%
2025-08-03 09:26:50.416 [Thd =6]  Info Default OpenLamp Transmission
2025-08-03 09:26:50.445 [Thd =233]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 09:26:51.220 [Thd =214]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:26:51.946 [Thd =233]  Error Default SyncSend recv cmd timeout
2025-08-03 09:26:52.427 [Thd =179]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:26:52.428 [Thd =224]  Info Default 聚焦Track已关闭
2025-08-03 09:26:53.893 [Thd =179]  Info MMSFocus _isStop = true 
2025-08-03 09:26:54.039 [Thd =6]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:26:54.039 [Thd =6]  Info Default OpenLamp Reflection
2025-08-03 09:26:55.397 [Thd =179]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:26:55.397 [Thd =164]  Info Default 已切换到线阵聚焦模式
2025-08-03 09:26:55.845 [Thd =6]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:26:58.401 [Thd =179]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 09:26:58.401 [Thd =174]  Info Default 聚焦Track已开启
2025-08-03 09:27:02.446 [Thd =161]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:27:02.446 [Thd =161]  Info Default ChangeLightPath: False!
2025-08-03 09:27:02.446 [Thd =231]  Info Default 标定中，请等待......
2025-08-03 09:27:02.447 [Thd =161]  Info Default CurrentSize:2048,2048
2025-08-03 09:27:02.447 [Thd =161]  Info Default Camera size no change
2025-08-03 09:27:02.447 [Thd =174]  Info Default CurrentSize:2048,2048
2025-08-03 09:27:02.447 [Thd =174]  Info Default Camera size no change
2025-08-03 09:27:02.448 [Thd =161]  Info Default Set camera size success
2025-08-03 09:27:02.448 [Thd =161]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:27:02.448 [Thd =174]  Info Default Set camera size success
2025-08-03 09:27:02.448 [Thd =174]  Info Default Current:TDIStage：TDI256，Target：TDI248
2025-08-03 09:27:03.427 [Thd =161]  Info Default Set camera parameter
2025-08-03 09:27:03.428 [Thd =161]  Info Default TriggerMode is On,dont set
2025-08-03 09:27:03.428 [Thd =161]  Info Default BUFFER_COUNT no change
2025-08-03 09:27:04.405 [Thd =174]  Info Default Set camera parameter
2025-08-03 09:27:04.406 [Thd =174]  Info Default TriggerMode is On,dont set
2025-08-03 09:27:04.406 [Thd =174]  Info Default BUFFER_COUNT no change
2025-08-03 09:27:04.411 [Thd =179]  Info Default scanStrips:1,LampResult:47
2025-08-03 09:27:04.411 [Thd =179]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 09:27:04.411 [Thd =179]  Info Default strip.VectorBegin.X:6.42501330844988,strip.VectorBegin.Y:5.03164931601353
2025-08-03 09:27:04.454 [Thd =179]  Info Default m_focusMapMode：0
2025-08-03 09:27:04.455 [Thd =179]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:04.455 [Thd =179]  Info Default strip.VectorBegin.X:1.11968072078686,strip.VectorBegin.Y:5.03164931601353
2025-08-03 09:27:04.672 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:04.677 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:05.532 [Thd =179]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 09:27:05.532 [Thd =179]  Info Default strip.VectorBegin.X:6.42501330844988,strip.VectorBegin.Y:5.03164931601353
2025-08-03 09:27:05.544 [Thd =6]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:27:05.950 [Thd =179]  Info Default m_focusMapMode：0
2025-08-03 09:27:05.952 [Thd =179]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:05.952 [Thd =179]  Info Default strip.VectorBegin.X:1.11968072078686,strip.VectorBegin.Y:5.03164931601353
2025-08-03 09:27:06.165 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:06.167 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:07.018 [Thd =179]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 09:27:07.018 [Thd =179]  Info Default strip.VectorBegin.X:6.42501330844988,strip.VectorBegin.Y:5.03164931601353
2025-08-03 09:27:07.045 [Thd =6]  Error Default SyncSend recv cmd timeout
2025-08-03 09:27:07.078 [Thd =211]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 09:27:07.443 [Thd =179]  Info Default m_focusMapMode：0
2025-08-03 09:27:07.445 [Thd =179]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:07.445 [Thd =179]  Info Default strip.VectorBegin.X:1.11968072078686,strip.VectorBegin.Y:5.03164931601353
2025-08-03 09:27:07.659 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:07.661 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:08.520 [Thd =179]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 09:27:08.558 [Thd =179]  Info Default AutoLightReturn:46,trans_result:0,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 09:27:08.559 [Thd =179]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:08.559 [Thd =179]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:08.559 [Thd =179]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:08.559 [Thd =179]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\OpticalCalibration
2025-08-03 09:27:08.579 [Thd =211]  Error Default SyncSend recv cmd timeout
2025-08-03 09:27:08.761 [Thd =179]  Info Default Light Complete 5,ResultMessge:结果:46
2025-08-03 09:27:08.808 [Thd =179]  Warn Default 还原光源最大功率
2025-08-03 09:27:08.808 [Thd =231]  Info Default LaserLamp MaxPower:300
2025-08-03 09:27:09.809 [Thd =187]  Info Default OpenLamp Transmission
2025-08-03 09:27:10.409 [Thd =185]  Info MMSFocus _isStop = true 
2025-08-03 09:27:10.613 [Thd =164]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:27:11.616 [Thd =187]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:27:11.616 [Thd =187]  Info Default CloseLamp Reflection
2025-08-03 09:27:12.652 [Thd =228]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:27:12.916 [Thd =185]  Info Default QuerySubstrateMode Area OK 
2025-08-03 09:27:12.916 [Thd =233]  Info Default 已切换到面阵聚焦模式
2025-08-03 09:27:14.153 [Thd =228]  Error Default SyncSend recv cmd timeout
2025-08-03 09:27:14.930 [Thd =185]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:27:14.931 [Thd =224]  Info Default 聚焦Track已关闭
2025-08-03 09:27:21.837 [Thd =161]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:27:21.877 [Thd =231]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:28706.77MB VirtualMemorySize:200.5 GB
2025-08-03 09:27:21.880 [Thd =231]  Info Default 光标定完成！
2025-08-03 09:27:26.499 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 09:27:26.602 [Thd =1]  Info Default ModuleBaseControl_Loaded：WaferStagePoint:3.76553054089554,5.18096750401353,,,AFCalibrationPoint:,
2025-08-03 09:27:28.329 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:Make0Calibration Before Memory usage:28713.42MB VirtualMemorySize:200.5 GB
2025-08-03 09:27:28.347 [Thd =224]  Info Default LineCameraStage:25
2025-08-03 09:27:28.347 [Thd =206]  Info Default CurrentSize:2048,2048
2025-08-03 09:27:28.347 [Thd =206]  Info Default Camera size no change
2025-08-03 09:27:28.348 [Thd =251]  Info Default CurrentSize:2048,2048
2025-08-03 09:27:28.348 [Thd =251]  Info Default Camera size no change
2025-08-03 09:27:28.349 [Thd =206]  Info Default Set camera size success
2025-08-03 09:27:28.349 [Thd =206]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 09:27:28.350 [Thd =251]  Info Default Set camera size success
2025-08-03 09:27:28.350 [Thd =251]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:27:29.800 [Thd =206]  Info Default Set camera parameter
2025-08-03 09:27:29.800 [Thd =206]  Info Default TriggerMode is On,dont set
2025-08-03 09:27:29.800 [Thd =206]  Info Default BUFFER_COUNT no change
2025-08-03 09:27:30.304 [Thd =251]  Info Default Set camera parameter
2025-08-03 09:27:30.304 [Thd =251]  Info Default TriggerMode is On,dont set
2025-08-03 09:27:30.304 [Thd =251]  Info Default BUFFER_COUNT no change
2025-08-03 09:27:30.313 [Thd =224]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 09:27:30.313 [Thd =224]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 09:27:30.313 [Thd =224]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 09:27:30.313 [Thd =224]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 09:27:30.313 [Thd =224]  Info Default BaseScanObjectLine:------------------
2025-08-03 09:27:30.313 [Thd =224]  Info Default BaseScanObjectLine:*****************
2025-08-03 09:27:30.313 [Thd =224]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 09:27:30.314 [Thd =224]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.43511086255434,StepStep:0.431713813341271,CosValueY:1,SinValueY:0
2025-08-03 09:27:30.567 [Thd =224]  Info strip vectorBegin:(6.425013,5.031649),VectorEnd:(1.119681,5.031649),CaptureBegin:(4.425013,5.031649)，CaptureEnd：(3.119681,5.031649),StepScan:0.43511086255434
2025-08-03 09:27:30.568 [Thd =224]  Info Default Calibreation AreaToLinePoint:(3.98990244589554,5.03164931601353)
2025-08-03 09:27:30.568 [Thd =214]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 09:27:30.568 [Thd =224]  Info Default SetMaxPower:300
2025-08-03 09:27:31.569 [Thd =231]  Info Default 打开光源，亮度：46%
2025-08-03 09:27:31.569 [Thd =207]  Info Default OpenLamp Transmission
2025-08-03 09:27:31.597 [Thd =205]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:27:32.383 [Thd =23]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:27:32.861 [Thd =224]  Info MMSFocus _isStop = true 
2025-08-03 09:27:33.098 [Thd =205]  Error Default SyncSend recv cmd timeout
2025-08-03 09:27:34.365 [Thd =224]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:27:34.365 [Thd =205]  Info Default 已切换到线阵聚焦模式
2025-08-03 09:27:35.196 [Thd =207]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:27:35.196 [Thd =207]  Info Default OpenLamp Reflection
2025-08-03 09:27:37.002 [Thd =207]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:27:43.605 [Thd =217]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:27:43.605 [Thd =217]  Info Default ChangeLightPath: False!
2025-08-03 09:27:43.605 [Thd =217]  Info Default 设置Make0标定环境中,请等待......
2025-08-03 09:27:43.605 [Thd =161]  Info Default 标定中，请稍等......
2025-08-03 09:27:45.617 [Thd =224]  Info MMSFocus _isStop = true 
2025-08-03 09:27:46.738 [Thd =191]  Warn Default Optimum:0.800um
2025-08-03 09:27:49.414 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:49.416 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:50.631 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:50.631 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:51.849 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:51.851 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:53.061 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:53.063 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:54.284 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:54.286 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:55.508 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:55.510 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:56.723 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:56.726 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:57.940 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:57.942 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:27:59.146 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:27:59.149 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:28:00.367 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:28:00.368 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:28:01.580 [Thd =224]  Info Default m_focusMapMode：0
2025-08-03 09:28:01.583 [Thd =224]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:-4.42501330844988,EndPoint:-3.11968072078686
2025-08-03 09:28:02.154 [Thd =224]  Info Default FitPosition:1.19861432052908,score:46.2150263084568
2025-08-03 09:28:02.154 [Thd =224]  Info Default FitPosition:0.993308523172853,score:132.304259969294
2025-08-03 09:28:02.154 [Thd =251]  Info Default Restore,Please wait......
2025-08-03 09:28:02.154 [Thd =224]  Info Default LaserLamp MaxPower:300
2025-08-03 09:28:02.155 [Thd =245]  Warn Default 还原光源最大功率
2025-08-03 09:28:03.155 [Thd =231]  Info Default OpenLamp Transmission
2025-08-03 09:28:03.155 [Thd =243]  Info MMSFocus _isStop = true 
2025-08-03 09:28:03.967 [Thd =203]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:28:04.962 [Thd =231]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:28:04.962 [Thd =231]  Info Default CloseLamp Reflection
2025-08-03 09:28:05.995 [Thd =251]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:28:07.503 [Thd =251]  Error Default SyncSend recv cmd timeout
2025-08-03 09:28:15.168 [Thd =214]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:28:15.254 [Thd =224]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:<Make0Calibration>b__23_1 End Memory usage:28813.79MB VirtualMemorySize:200.5 GB
2025-08-03 09:28:26.405 [Thd =1]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:28:26.649 [Thd =1]  Info Default make0 AreaToLinePoint:(3.98990244589554,5.03164931601353)
2025-08-03 09:28:26.713 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:ButtonMake_Click Before Memory usage:28872.02MB VirtualMemorySize:200.5 GB
2025-08-03 09:28:27.175 [Thd =191]  Info MMSFocus _isStop = true 
2025-08-03 09:28:30.332 [Thd =191]  Info Default 保存AF标定结果成功！
2025-08-03 09:28:30.621 [Thd =217]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0+<>c__DisplayClass33_0MethodName:<ButtonMake_Click>b__1 End Memory usage:28816.39MB VirtualMemorySize:200.6 GB
2025-08-03 09:28:30.621 [Thd =217]  Info Default SavePoint：WaferStagePoint:3.76553054089554,5.18096750401353,,,AFCalibrationPoint:67528576.1238084,66119412.3100537
2025-08-03 09:28:58.661 [Thd =1]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:28:58.904 [Thd =1]  Info Default make0 AreaToLinePoint:(3.98990244589554,5.03164931601353)
2025-08-03 09:28:58.972 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:ButtonMake_Click Before Memory usage:28818MB VirtualMemorySize:200.6 GB
2025-08-03 09:28:59.649 [Thd =243]  Info MMSFocus _isStop = true 
2025-08-03 09:29:02.802 [Thd =243]  Info Default 保存AF标定结果成功！
2025-08-03 09:29:03.084 [Thd =230]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0+<>c__DisplayClass33_0MethodName:<ButtonMake_Click>b__1 End Memory usage:28822.5MB VirtualMemorySize:200.6 GB
2025-08-03 09:29:03.084 [Thd =185]  Info Default SavePoint：WaferStagePoint:3.76553054089554,5.18096750401353,,,AFCalibrationPoint:67528576.1238084,66119412.3100537
2025-08-03 09:29:07.885 [Thd =206]  Info Default QuerySubstrateMode Area OK 
2025-08-03 09:29:07.885 [Thd =179]  Info Default 已切换到面阵聚焦模式
2025-08-03 09:29:09.887 [Thd =206]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:29:09.887 [Thd =211]  Info Default 聚焦Track已关闭
2025-08-03 09:29:39.656 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:28822.95MB VirtualMemorySize:200.6 GB
2025-08-03 09:29:39.831 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click End Memory usage:28822.98MB VirtualMemorySize:200.6 GB
2025-08-03 09:29:39.915 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:28823.88MB VirtualMemorySize:200.6 GB
2025-08-03 09:29:46.792 [Thd =203]  Info Default 设置平场校正环境中......
2025-08-03 09:29:46.793 [Thd =6]  Info Default Flatfield Corrention Init******************
2025-08-03 09:29:47.136 [Thd =6]  Info MMSFocus _isStop = true 
2025-08-03 09:29:47.136 [Thd =6]  Info Default aSwitchIndex index:0
2025-08-03 09:29:47.136 [Thd =6]  Info Default lens from ATF:
2025-08-03 09:29:47.136 [Thd =6]  Info Default objCount:3
2025-08-03 09:29:47.136 [Thd =6]  Info Default ratio:P200;objId:0
2025-08-03 09:29:47.136 [Thd =6]  Info Default ratio:P140;objId:1
2025-08-03 09:29:47.136 [Thd =6]  Info Default ratio:P100;objId:2
2025-08-03 09:29:47.136 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:29:47.136 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:29:47.136 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:29:47.136 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:29:47.137 [Thd =6]  Info Default ratio:;objId:0
2025-08-03 09:29:47.137 [Thd =6]  Info Default lens from system settings:
2025-08-03 09:29:47.137 [Thd =6]  Info Default systemlensettings lens count:3
2025-08-03 09:29:47.137 [Thd =6]  Info Default ratio:P200;objId:0
2025-08-03 09:29:47.137 [Thd =6]  Info Default ratio:P140;objId:1
2025-08-03 09:29:47.137 [Thd =6]  Info Default ratio:P100;objId:2
2025-08-03 09:29:47.139 [Thd =6]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 09:29:47.172 [Thd =6]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 09:29:47.175 [Thd =6]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 09:29:47.175 [Thd =6]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 09:29:47.175 [Thd =6]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 09:29:47.176 [Thd =6]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 09:29:47.176 [Thd =6]  Info Default BaseScanObjectLine:------------------
2025-08-03 09:29:47.176 [Thd =6]  Info Default BaseScanObjectLine:*****************
2025-08-03 09:29:47.176 [Thd =6]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 09:29:47.176 [Thd =6]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.43511086255434,StepStep:0.431713813341271,CosValueY:1,SinValueY:0
2025-08-03 09:29:47.421 [Thd =6]  Info strip vectorBegin:(-10.715889,68.864396),VectorEnd:(-16.021222,68.864396),CaptureBegin:(-12.715889,68.864396)，CaptureEnd：(-14.021222,68.864396),StepScan:0.43511086255434
2025-08-03 09:29:48.122 [Thd =174]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 09:29:48.122 [Thd =6]  Info Default SetMaxPower:300
2025-08-03 09:29:49.124 [Thd =217]  Info Default 打开光源，亮度：46%
2025-08-03 09:29:49.124 [Thd =228]  Info Default OpenLamp Transmission
2025-08-03 09:29:49.136 [Thd =207]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:29:49.927 [Thd =161]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:29:50.637 [Thd =207]  Error Default SyncSend recv cmd timeout
2025-08-03 09:29:51.124 [Thd =6]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:29:51.124 [Thd =191]  Info Default 聚焦Track已关闭
2025-08-03 09:29:52.741 [Thd =228]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:29:52.741 [Thd =228]  Info Default OpenLamp Reflection
2025-08-03 09:29:53.144 [Thd =6]  Info MMSFocus _isStop = true 
2025-08-03 09:29:54.547 [Thd =228]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:29:54.657 [Thd =6]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:29:54.657 [Thd =217]  Info Default 已切换到线阵聚焦模式
2025-08-03 09:29:57.659 [Thd =6]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 09:29:57.659 [Thd =185]  Info Default 聚焦Track已开启
2025-08-03 09:30:01.149 [Thd =23]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:30:01.149 [Thd =23]  Info Default ChangeLightPath: False!
2025-08-03 09:30:01.149 [Thd =6]  Info Default OpenLamp Transmission
2025-08-03 09:30:01.149 [Thd =207]  Info Default Open lamp，Power:46%
2025-08-03 09:30:01.951 [Thd =23]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:30:02.151 [Thd =6]  Info Default OpenLamp Reflection
2025-08-03 09:30:03.965 [Thd =6]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:30:03.970 [Thd =188]  Info Default 平场校正中,请等待 ......
2025-08-03 09:30:03.970 [Thd =206]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:248
2025-08-03 09:30:03.970 [Thd =206]  Info Default CurrentSize:2048,2048
2025-08-03 09:30:03.970 [Thd =206]  Info Default Camera size no change
2025-08-03 09:30:03.971 [Thd =233]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:192
2025-08-03 09:30:03.971 [Thd =233]  Info Default CurrentSize:2048,2048
2025-08-03 09:30:03.971 [Thd =233]  Info Default Camera size no change
2025-08-03 09:30:03.971 [Thd =230]  Info Default 扫描图片......
2025-08-03 09:30:03.972 [Thd =206]  Info Default Set camera size success
2025-08-03 09:30:03.972 [Thd =206]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 09:30:03.972 [Thd =233]  Info Default Set camera size success
2025-08-03 09:30:03.972 [Thd =233]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:30:05.435 [Thd =206]  Info Default Set camera parameter
2025-08-03 09:30:05.435 [Thd =206]  Info Default TriggerMode is On,dont set
2025-08-03 09:30:05.435 [Thd =206]  Info Default BUFFER_COUNT no change
2025-08-03 09:30:05.926 [Thd =233]  Info Default Set camera parameter
2025-08-03 09:30:05.927 [Thd =233]  Info Default TriggerMode is On,dont set
2025-08-03 09:30:05.927 [Thd =233]  Info Default BUFFER_COUNT no change
2025-08-03 09:30:10.929 [Thd =6]  Info Default FlatfieldCorrention scanStrips:1,Intensity:46
2025-08-03 09:30:10.929 [Thd =6]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:0,Light:46
2025-08-03 09:30:10.929 [Thd =6]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.7158891969707,strip.VectorBegin.Y:68.8643960483783
2025-08-03 09:30:11.264 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:30:11.265 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:12.7158891969707,EndPoint:14.0212217846338
2025-08-03 09:30:11.265 [Thd =6]  Info Default FlatfieldCorrention strip.VectorBegin.X:-16.0212217846338,strip.VectorBegin.Y:68.8643960483783
2025-08-03 09:30:11.476 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\Flatfield
2025-08-03 09:30:11.477 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\Flatfield
2025-08-03 09:30:12.346 [Thd =6]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:1,Light:45
2025-08-03 09:30:12.346 [Thd =6]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.7158891969707,strip.VectorBegin.Y:68.8643960483783
2025-08-03 09:30:12.386 [Thd =174]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 09:30:12.776 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:30:12.779 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:12.7158891969707,EndPoint:14.0212217846338
2025-08-03 09:30:12.779 [Thd =6]  Info Default FlatfieldCorrention strip.VectorBegin.X:-16.0212217846338,strip.VectorBegin.Y:68.8643960483783
2025-08-03 09:30:12.994 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\Flatfield
2025-08-03 09:30:12.994 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\Flatfield
2025-08-03 09:30:13.857 [Thd =6]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:2,Light:46
2025-08-03 09:30:13.857 [Thd =6]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.7158891969707,strip.VectorBegin.Y:68.8643960483783
2025-08-03 09:30:13.886 [Thd =174]  Error Default SyncSend recv cmd timeout
2025-08-03 09:30:13.918 [Thd =211]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:30:14.276 [Thd =6]  Info Default m_focusMapMode：0
2025-08-03 09:30:14.278 [Thd =6]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:12.7158891969707,EndPoint:14.0212217846338
2025-08-03 09:30:14.278 [Thd =6]  Info Default FlatfieldCorrention strip.VectorBegin.X:-16.0212217846338,strip.VectorBegin.Y:68.8643960483783
2025-08-03 09:30:14.489 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\Flatfield
2025-08-03 09:30:14.490 [Thd =30]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-DB-YXC\rcp_DB_1\Flatfield
2025-08-03 09:30:15.419 [Thd =211]  Error Default SyncSend recv cmd timeout
2025-08-03 09:30:15.562 [Thd =246]  Warn Default 还原光源最大功率
2025-08-03 09:30:15.562 [Thd =6]  Info Default LaserLamp MaxPower:300
2025-08-03 09:30:16.563 [Thd =228]  Info Default OpenLamp Transmission
2025-08-03 09:30:16.671 [Thd =179]  Info MMSFocus _isStop = true 
2025-08-03 09:30:17.367 [Thd =185]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:30:18.371 [Thd =228]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:30:18.371 [Thd =228]  Info Default CloseLamp Reflection
2025-08-03 09:30:19.175 [Thd =179]  Info Default QuerySubstrateMode Area OK 
2025-08-03 09:30:19.175 [Thd =206]  Info Default 已切换到面阵聚焦模式
2025-08-03 09:30:19.387 [Thd =205]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:30:20.889 [Thd =205]  Error Default SyncSend recv cmd timeout
2025-08-03 09:30:21.180 [Thd =179]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:30:21.180 [Thd =174]  Info Default 聚焦Track已关闭
2025-08-03 09:30:28.573 [Thd =230]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:30:28.573 [Thd =23]  Info Default 平场校正中,请等待 ......
2025-08-03 09:30:29.757 [Thd =224]  Info Default 校正完成
2025-08-03 09:30:32.153 [Thd =1]  Info flatfieldbtn Ok_Click  begin
2025-08-03 09:30:32.153 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm begin
2025-08-03 09:30:32.154 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy begin
2025-08-03 09:30:32.155 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy end
2025-08-03 09:30:32.155 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm end
2025-08-03 09:30:32.155 [Thd =1]  Info ExecuteSuccess  begin
2025-08-03 09:30:32.155 [Thd =1]  Info ExecuteSuccess  end
2025-08-03 09:30:33.784 [Thd =1]  Info flatfield btnOk_Click  end
2025-08-03 09:30:35.098 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnXYCalib_Click Before Memory usage:28895.36MB VirtualMemorySize:200.7 GB
2025-08-03 09:30:35.277 [Thd =206]  Info Default 设置RTB 标定环境中,请等待 ......
2025-08-03 09:30:35.278 [Thd =233]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 09:30:35.281 [Thd =233]  Info Default SetDistortionPara disaabled
2025-08-03 09:30:35.580 [Thd =233]  Info MMSFocus _isStop = true 
2025-08-03 09:30:35.580 [Thd =233]  Info Default aSwitchIndex index:0
2025-08-03 09:30:35.580 [Thd =233]  Info Default lens from ATF:
2025-08-03 09:30:35.580 [Thd =233]  Info Default objCount:3
2025-08-03 09:30:35.580 [Thd =233]  Info Default ratio:P200;objId:0
2025-08-03 09:30:35.580 [Thd =233]  Info Default ratio:P140;objId:1
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:P100;objId:2
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:;objId:0
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:;objId:0
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:;objId:0
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:;objId:0
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:;objId:0
2025-08-03 09:30:35.581 [Thd =233]  Info Default lens from system settings:
2025-08-03 09:30:35.581 [Thd =233]  Info Default systemlensettings lens count:3
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:P200;objId:0
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:P140;objId:1
2025-08-03 09:30:35.581 [Thd =233]  Info Default ratio:P100;objId:2
2025-08-03 09:30:35.584 [Thd =233]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 09:30:35.616 [Thd =233]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 09:30:35.619 [Thd =233]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 09:30:35.619 [Thd =233]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 09:30:35.619 [Thd =233]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 09:30:35.620 [Thd =233]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 09:30:35.620 [Thd =233]  Info Default BaseScanObjectLine:------------------
2025-08-03 09:30:35.620 [Thd =233]  Info Default BaseScanObjectLine:*****************
2025-08-03 09:30:35.620 [Thd =233]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 09:30:35.620 [Thd =233]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.43511086255434,StepStep:0.431713813341271,CosValueY:1,SinValueY:0
2025-08-03 09:30:35.620 [Thd =233]  Info Default deltax_stage 22.6111687189261, deltay_stage:0.
2025-08-03 09:30:35.620 [Thd =233]  Info Default MoveStageForMarkCol101 point (62.0506715505038, 50.0983749594017), GDS ref(5500000, 138400000), gdsObject(28111000, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:30:35.620 [Thd =233]  Info Default deltax_stage 0, deltay_stage:-123.226276000239.
2025-08-03 09:30:35.620 [Thd =233]  Info Default MoveStageForMarkCol102 point (-61.1756044497351, 50.0983749594017), GDS ref(28111000, 138400000), gdsObject(28111000, 15174000), stageRef(62.0506715505038, 50.0983749594017).
2025-08-03 09:30:35.620 [Thd =233]  Info Default located_pos:(-61.1756044497351, 50.0983749594017)
2025-08-03 09:30:42.256 [Thd =233]  Info strip vectorBegin:(-58.516122,49.949057),VectorEnd:(-63.821454,49.949057),CaptureBegin:(-60.516122,49.949057)，CaptureEnd：(-61.821454,49.949057),StepScan:0.43511086255434
2025-08-03 09:30:42.256 [Thd =233]  Info Default VectorBegin:(-58.5161216821807,49.9490567714017)
2025-08-03 09:30:43.484 [Thd =207]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 09:30:43.484 [Thd =233]  Info Default SetMaxPower:300
2025-08-03 09:30:44.485 [Thd =161]  Info Default 打开光源，亮度：46%
2025-08-03 09:30:44.485 [Thd =206]  Info Default OpenLamp Transmission
2025-08-03 09:30:44.497 [Thd =224]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:30:45.289 [Thd =230]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:30:45.999 [Thd =224]  Error Default SyncSend recv cmd timeout
2025-08-03 09:30:46.494 [Thd =233]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:30:46.504 [Thd =228]  Info Default 聚焦Track已关闭
2025-08-03 09:30:48.105 [Thd =206]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:30:48.105 [Thd =206]  Info Default OpenLamp Reflection
2025-08-03 09:30:48.603 [Thd =233]  Info MMSFocus _isStop = true 
2025-08-03 09:30:49.912 [Thd =206]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:30:50.107 [Thd =233]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:30:50.107 [Thd =246]  Info Default 已切换到线阵聚焦模式
2025-08-03 09:30:53.111 [Thd =233]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 09:30:53.111 [Thd =251]  Info Default 聚焦Track已开启
2025-08-03 09:30:56.495 [Thd =185]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:30:56.495 [Thd =185]  Info Default ChangeLightPath: False!
2025-08-03 09:30:56.495 [Thd =245]  Info Default RTB 标定中,请等待 ......
2025-08-03 09:30:56.495 [Thd =205]  Info Default CurrentSize:2048,2048
2025-08-03 09:30:56.495 [Thd =205]  Info Default Camera size no change
2025-08-03 09:30:56.495 [Thd =230]  Info Default CurrentSize:2048,2048
2025-08-03 09:30:56.496 [Thd =230]  Info Default Camera size no change
2025-08-03 09:30:56.497 [Thd =205]  Info Default Set camera size success
2025-08-03 09:30:56.497 [Thd =205]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:30:56.497 [Thd =230]  Info Default Set camera size success
2025-08-03 09:30:56.497 [Thd =230]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 09:30:57.947 [Thd =205]  Info Default Set camera parameter
2025-08-03 09:30:57.947 [Thd =205]  Info Default TriggerMode is On,dont set
2025-08-03 09:30:57.947 [Thd =205]  Info Default BUFFER_COUNT no change
2025-08-03 09:30:58.451 [Thd =230]  Info Default Set camera parameter
2025-08-03 09:30:58.451 [Thd =230]  Info Default TriggerMode is On,dont set
2025-08-03 09:30:58.451 [Thd =230]  Info Default BUFFER_COUNT no change
2025-08-03 09:30:58.459 [Thd =233]  Info Default SetDistortionPara disaabled
2025-08-03 09:30:58.460 [Thd =233]  Info Default scanStrips:1
2025-08-03 09:30:58.500 [Thd =233]  Info Default m_focusMapMode：0
2025-08-03 09:30:58.501 [Thd =233]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456475856611,BeginPoint:60.5161216821807,EndPoint:61.8214542698438
2025-08-03 09:30:59.576 [Thd =233]  Info Default Get_Tolerance_and_Rounding:******Tolerance********
2025-08-03 09:31:02.360 [Thd =233]  Info Default Get_Tolerance_and_Rounding:-----------Tolerance-------------
2025-08-03 09:31:02.407 [Thd =233]  Warn Default 还原光源最大功率
2025-08-03 09:31:02.408 [Thd =205]  Info Default LaserLamp MaxPower:300
2025-08-03 09:31:03.408 [Thd =246]  Info Default OpenLamp Transmission
2025-08-03 09:31:04.121 [Thd =188]  Info MMSFocus _isStop = true 
2025-08-03 09:31:04.211 [Thd =179]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:31:05.216 [Thd =246]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:31:05.216 [Thd =246]  Info Default CloseLamp Reflection
2025-08-03 09:31:06.237 [Thd =228]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:31:06.625 [Thd =188]  Info Default QuerySubstrateMode Area OK 
2025-08-03 09:31:06.625 [Thd =23]  Info Default 已切换到面阵聚焦模式
2025-08-03 09:31:07.738 [Thd =228]  Error Default SyncSend recv cmd timeout
2025-08-03 09:31:08.628 [Thd =188]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:31:08.628 [Thd =185]  Info Default 聚焦Track已关闭
2025-08-03 09:31:15.430 [Thd =174]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:31:15.433 [Thd =185]  Info Default 公差标定完成
2025-08-03 09:31:15.468 [Thd =205]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:<btnXYCalib_Click>b__28_1 Before Memory usage:28945.47MB VirtualMemorySize:200.7 GB
2025-08-03 09:31:24.911 [Thd =1]  Info Default CDdefectResolution is 0.2
2025-08-03 09:31:24.911 [Thd =1]  Info Default CDdefectResolutionBil is 0.25
2025-08-03 09:31:24.911 [Thd =1]  Info Default PHdefectResolution is 0.2
2025-08-03 09:31:44.922 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 09:31:44.966 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 09:31:44.966 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 09:31:44.967 [Thd =230]  Info Default Start [1/1]
2025-08-03 09:31:44.970 [Thd =214]  Info Default 开始检查！
2025-08-03 09:31:52.408 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 09:31:52.408 [Thd =206]  Info Default 初始化插件
2025-08-03 09:31:52.408 [Thd =243]  Info Default CurrentSize:2048,2048
2025-08-03 09:31:52.408 [Thd =243]  Info Default Camera size no change
2025-08-03 09:31:52.408 [Thd =246]  Info Default CurrentSize:2048,2048
2025-08-03 09:31:52.408 [Thd =246]  Info Default Camera size no change
2025-08-03 09:31:52.409 [Thd =185]  Info Default 设置 TDI 相机参数...
2025-08-03 09:31:52.409 [Thd =164]  Info Default 初始化DB目录
2025-08-03 09:31:52.409 [Thd =243]  Info Default Set camera size success
2025-08-03 09:31:52.409 [Thd =243]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 09:31:52.410 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 09:31:52.411 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 09:31:52.411 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 09:31:52.533 [Thd =1]  Info Default deltax_stage 14.9114852658002, deltay_stage:0.
2025-08-03 09:31:52.533 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503064090312, 57.7980584211857), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:31:52.533 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59983102197977.
2025-08-03 09:31:52.534 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.650137431011, 57.7980584211857), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503064090312, 57.7980584211857).
2025-08-03 09:31:52.534 [Thd =1]  Info Default located_pos:(69.650137431011, 57.7980584211857)
2025-08-03 09:31:52.534 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:31:52.534 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3506793668932, 72.7095437037533), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:31:52.534 [Thd =1]  Info Default located_pos:(-62.3506793668932, 72.7095437037533)
2025-08-03 09:31:52.534 [Thd =187]  Info Default Measuring the height difference of inspection area
2025-08-03 09:31:52.884 [Thd =246]  Info Default Set camera size success
2025-08-03 09:31:52.884 [Thd =246]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:31:53.388 [Thd =243]  Info Default Set camera parameter
2025-08-03 09:31:53.388 [Thd =243]  Info Default TriggerMode is On,dont set
2025-08-03 09:31:53.388 [Thd =243]  Info Default BUFFER_COUNT no change
2025-08-03 09:31:54.366 [Thd =246]  Info Default Set camera parameter
2025-08-03 09:31:54.366 [Thd =246]  Info Default TriggerMode is On,dont set
2025-08-03 09:31:54.367 [Thd =246]  Info Default BUFFER_COUNT no change
2025-08-03 09:31:59.628 [Thd =231]  Info Default 初始化DPU服务器！
2025-08-03 09:31:59.628 [Thd =207]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 09:32:07.924 [Thd =188]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427727,"ServiceStartTime":"2025\/8\/3 9:14:11","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:07.925 [Thd =245]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427727,"ServiceStartTime":"2025\/8\/3 9:14:11","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:07.926 [Thd =233]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427727,"ServiceStartTime":"2025\/8\/3 9:14:10","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":35,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:07.927 [Thd =224]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427727,"ServiceStartTime":"2025\/8\/3 9:15:07","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:08.927 [Thd =246]  Info MMSFocus _isStop = true 
2025-08-03 09:32:10.453 [Thd =179]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427732,"ServiceStartTime":"2025\/8\/3 9:32:06","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:10.471 [Thd =185]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427732,"ServiceStartTime":"2025\/8\/3 9:33:03","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:10.473 [Thd =174]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427732,"ServiceStartTime":"2025\/8\/3 9:32:07","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:10.488 [Thd =161]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427732,"ServiceStartTime":"2025\/8\/3 9:32:07","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:32:10.938 [Thd =207]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 09:32:10.977 [Thd =1]  Info Default Register inspect event！
2025-08-03 09:32:10.996 [Thd =1]  Info Default initial*****Light_intensity:46, min:10, max:220
2025-08-03 09:32:10.996 [Thd =228]  Info Default 初始化检测数据
2025-08-03 09:32:10.996 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 09:32:10.996 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 09:32:10.996 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3506793668932, reference point Stage_Y: 72.7095437037533, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 09:32:10.996 [Thd =187]  Info Default m_start_strip_no:0
2025-08-03 09:32:10.997 [Thd =187]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 09:32:10.997 [Thd =187]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.092,"m_y_tolerance":-0.1,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,217,3,0,1130102784,1065353216,1065353216,0,1092026625,0],"m_R_collect":[200,199,103,0,1128792064,1065353216,1065353216,1701868398,0,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.144,"m_y_tolerance_R":-0.194,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 09:32:10.998 [Thd =187]  Info Default m_line_camera_cols:321
2025-08-03 09:32:10.998 [Thd =187]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 09:32:10.998 [Thd =187]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 09:32:11.002 [Thd =187]  Info Default SetDistortionPara disaabled
2025-08-03 09:32:11.002 [Thd =187]  Info Default Set distortion correction parameters End
2025-08-03 09:32:11.002 [Thd =187]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 09:32:13.084 [Thd =187]  Info Default InitDie2DBRes Success!!!!
2025-08-03 09:32:19.817 [Thd =246]  Info Default DemarcateInspectZ:2.7
2025-08-03 09:32:20.597 [Thd =246]  Info MMSFocus _isStop = true 
2025-08-03 09:32:31.752 [Thd =246]  Info Default DemarcateInspectZ:2.6
2025-08-03 09:32:32.532 [Thd =246]  Info MMSFocus _isStop = true 
2025-08-03 09:32:42.568 [Thd =246]  Info Default DemarcateInspectZ:0
2025-08-03 09:32:43.347 [Thd =246]  Info MMSFocus _isStop = true 
2025-08-03 09:32:54.505 [Thd =246]  Info Default DemarcateInspectZ:0.7
2025-08-03 09:32:54.512 [Thd =246]  Info Default MarkHeightDifference:2.7
2025-08-03 09:32:54.513 [Thd =188]  Info Default Difference of the Inspection Area2.70μm
2025-08-03 09:33:12.962 [Thd =1]  Info Default Successful alignment！
2025-08-03 09:33:12.962 [Thd =224]  Info Default 对准完成！
2025-08-03 09:33:12.962 [Thd =214]  Info Default 稍等！设置相机参数中
2025-08-03 09:33:12.962 [Thd =228]  Info Default 注册相机取图
2025-08-03 09:33:12.962 [Thd =179]  Info Default 移动到起始点位
2025-08-03 09:33:13.305 [Thd =211]  Info MMSFocus _isStop = true 
2025-08-03 09:33:13.509 [Thd =211]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.43511086255434,StepStep:0.431713813341271,CosValueY:1,SinValueY:0
2025-08-03 09:33:13.510 [Thd =164]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 09:33:13.510 [Thd =211]  Info Default SetMaxPower:300
2025-08-03 09:33:14.511 [Thd =224]  Info Default 打开光源，亮度：46%
2025-08-03 09:33:14.511 [Thd =191]  Info Default OpenLamp Transmission
2025-08-03 09:33:14.535 [Thd =214]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 09:33:15.315 [Thd =233]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:33:16.037 [Thd =214]  Error Default SyncSend recv cmd timeout
2025-08-03 09:33:16.512 [Thd =179]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:33:16.512 [Thd =161]  Info Default 聚焦Track已关闭
2025-08-03 09:33:17.821 [Thd =179]  Info MMSFocus _isStop = true 
2025-08-03 09:33:18.127 [Thd =191]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:33:18.127 [Thd =191]  Info Default OpenLamp Reflection
2025-08-03 09:33:19.335 [Thd =179]  Info Default QuerySubstrateMode Line OK 
2025-08-03 09:33:19.335 [Thd =164]  Info Default 已切换到线阵聚焦模式
2025-08-03 09:33:19.933 [Thd =191]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:33:21.338 [Thd =179]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 09:33:21.338 [Thd =251]  Info Default 聚焦Track已开启
2025-08-03 09:33:26.545 [Thd =246]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:33:26.545 [Thd =246]  Info Default ChangeLightPath: False!
2025-08-03 09:33:26.545 [Thd =224]  Info Default 执行MarkOffSet......
2025-08-03 09:33:26.545 [Thd =188]  Info Default CurrentSize:2048,2048
2025-08-03 09:33:26.557 [Thd =188]  Info Default Camera size no change
2025-08-03 09:33:26.557 [Thd =188]  Info Default Set camera size success
2025-08-03 09:33:26.558 [Thd =188]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:33:27.535 [Thd =188]  Info Default Set camera parameter
2025-08-03 09:33:27.536 [Thd =188]  Info Default TriggerMode is On,dont set
2025-08-03 09:33:27.536 [Thd =188]  Info Default BUFFER_COUNT no change
2025-08-03 09:33:27.539 [Thd =211]  Info strip vectorBegin:(59.457926,72.560226),VectorEnd:(64.763258,72.560226),CaptureBegin:(61.457926,72.560226)，CaptureEnd：(62.763258,72.560226),StepScan:0.43511086255434
2025-08-03 09:33:29.804 [Thd =211]  Info Default m_focusMapMode：0
2025-08-03 09:33:29.806 [Thd =211]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456475856611,BeginPoint:-61.4579257227493,EndPoint:-62.7632583104123
2025-08-03 09:33:30.416 [Thd =31]  Info Default stormCore.MatchTemplate:0.165811
2025-08-03 09:33:30.417 [Thd =191]  Warn Default Mark offset match score:0.16581
2025-08-03 09:33:30.561 [Thd =211]  Info MMSFocus _isStop = true 
2025-08-03 09:33:31.085 [Thd =185]  Warn Default 还原光源最大功率
2025-08-03 09:33:31.085 [Thd =211]  Info Default LaserLamp MaxPower:300
2025-08-03 09:33:32.086 [Thd =179]  Info Default OpenLamp Transmission
2025-08-03 09:33:32.086 [Thd =23]  Info MMSFocus _isStop = true 
2025-08-03 09:33:32.890 [Thd =191]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:33:33.893 [Thd =179]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:33:33.893 [Thd =179]  Info Default CloseLamp Reflection
2025-08-03 09:33:34.602 [Thd =23]  Info Default QuerySubstrateMode Area OK 
2025-08-03 09:33:34.602 [Thd =187]  Info Default 已切换到面阵聚焦模式
2025-08-03 09:33:34.917 [Thd =187]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:33:36.419 [Thd =187]  Error Default SyncSend recv cmd timeout
2025-08-03 09:33:36.604 [Thd =23]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 09:33:36.604 [Thd =23]  Info Default 聚焦Track已关闭
2025-08-03 09:33:44.099 [Thd =251]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:33:44.734 [Thd =203]  Error Default Mark匹配分值过低或者匹配失败！
2025-08-03 09:33:44.734 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Aborted
2025-08-03 09:33:44.738 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Aborted
2025-08-03 09:33:44.740 [Thd =1]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 09:33:44.741 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 09:33:44.765 [Thd =217]  Info Default Chuck vacuum close
2025-08-03 09:33:45.765 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:33:45.765 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Aborted!CurTaskName:2953
2025-08-03 09:33:45.765 [Thd =230]  Info Default Inspection stop!
2025-08-03 09:33:46.584 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:35:19.238 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:35:19.238 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:35:20.527 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:35:20.527 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:35:20.527 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:35:32.606 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:35:32.606 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:35:38.750 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:35:38.751 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:35:38.751 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:35:40.631 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:35:40.632 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:35:53.645 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:35:53.645 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:35:53.645 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:36:19.005 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:36:19.006 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:36:28.866 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:36:28.868 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:36:28.868 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:36:38.086 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:36:38.086 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:36:38.086 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:18.316 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:18.317 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:18.317 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:19.994 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:20.005 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:20.005 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:20.006 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:20.006 [Thd =203]  Info Default located_pos:(62.049599262858, 72.7095437037533)
2025-08-03 09:37:20.006 [Thd =203]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:20.006 [Thd =203]  Info Default MoveStageForMarkCol102 point (-62.3506793668932, 72.7095437037533), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:20.006 [Thd =203]  Info Default located_pos:(-62.3506793668932, 72.7095437037533)
2025-08-03 09:37:20.006 [Thd =203]  Info Default deltax_stage 141.40105509956, deltay_stage:0.
2025-08-03 09:37:20.006 [Thd =203]  Info Default MoveStageForMarkCol101 point (62.0563049137855, -68.6915115548074), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:20.007 [Thd =203]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:20.007 [Thd =203]  Info Default MoveStageForMarkCol102 point (-62.3439737159657, -68.6915115548074), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0563049137855, -68.6915115548074).
2025-08-03 09:37:20.007 [Thd =203]  Info Default located_pos:(-62.3439737159657, -68.6915115548074)
2025-08-03 09:37:20.007 [Thd =203]  Info Default AliPt:(62.049599262858, 72.7095437037533), GDS2StagePt:(62.049599262858, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:20.007 [Thd =203]  Info Default AliPt:(-62.3506793668932, 72.7095437037555), GDS2StagePt:(-62.3506793668932, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:20.007 [Thd =203]  Info Default AliPt:(-62.3439737159732, -68.6915113958045), GDS2StagePt:(-62.3439737159657, -68.6915115548074), XOffset:5, YOffset:5
2025-08-03 09:37:20.016 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:20.016 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:20.016 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:20.017 [Thd =1]  Info Default deltax_stage 14.9114852658002, deltay_stage:0.
2025-08-03 09:37:20.017 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503064090312, 57.7980584211857), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:20.017 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59983102197977.
2025-08-03 09:37:20.017 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.650137431011, 57.7980584211857), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503064090312, 57.7980584211857).
2025-08-03 09:37:20.017 [Thd =1]  Info Default located_pos:(69.650137431011, 57.7980584211857)
2025-08-03 09:37:20.017 [Thd =1]  Info Default deltax_stage 126.459016605779, deltay_stage:0.
2025-08-03 09:37:20.017 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.055596318689, -53.7494730442248), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:20.017 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.986678621648.
2025-08-03 09:37:20.018 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9310823029593, -53.7494730442248), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.055596318689, -53.7494730442248).
2025-08-03 09:37:20.018 [Thd =1]  Info Default located_pos:(-69.9310823029593, -53.7494730442248)
2025-08-03 09:37:23.103 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:30.665 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:30.676 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:30.676 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:30.676 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:30.676 [Thd =205]  Info Default located_pos:(62.049599262858, 72.7095437037533)
2025-08-03 09:37:30.677 [Thd =205]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:30.677 [Thd =205]  Info Default MoveStageForMarkCol102 point (-62.3506793668932, 72.7095437037533), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:30.677 [Thd =205]  Info Default located_pos:(-62.3506793668932, 72.7095437037533)
2025-08-03 09:37:30.677 [Thd =205]  Info Default deltax_stage 141.40105509956, deltay_stage:0.
2025-08-03 09:37:30.677 [Thd =205]  Info Default MoveStageForMarkCol101 point (62.0563049137855, -68.6915115548074), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:30.677 [Thd =205]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:30.677 [Thd =205]  Info Default MoveStageForMarkCol102 point (-62.3439737159657, -68.6915115548074), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0563049137855, -68.6915115548074).
2025-08-03 09:37:30.677 [Thd =205]  Info Default located_pos:(-62.3439737159657, -68.6915115548074)
2025-08-03 09:37:30.677 [Thd =205]  Info Default AliPt:(62.049599262858, 72.7095437037533), GDS2StagePt:(62.049599262858, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:30.677 [Thd =205]  Info Default AliPt:(-62.3506793668932, 72.7095437037555), GDS2StagePt:(-62.3506793668932, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:30.677 [Thd =205]  Info Default AliPt:(-62.3439737159732, -68.6915113958045), GDS2StagePt:(-62.3439737159657, -68.6915115548074), XOffset:5, YOffset:5
2025-08-03 09:37:30.686 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:30.686 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:30.686 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:30.687 [Thd =1]  Info Default deltax_stage 14.9114852658002, deltay_stage:0.
2025-08-03 09:37:30.687 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503064090312, 57.7980584211857), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:30.687 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59983102197977.
2025-08-03 09:37:30.687 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.650137431011, 57.7980584211857), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503064090312, 57.7980584211857).
2025-08-03 09:37:30.687 [Thd =1]  Info Default located_pos:(69.650137431011, 57.7980584211857)
2025-08-03 09:37:31.009 [Thd =1]  Info Default deltax_stage 126.459016605779, deltay_stage:0.
2025-08-03 09:37:31.009 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.055596318689, -53.7494730442248), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:31.009 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.986678621648.
2025-08-03 09:37:31.009 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9310823029593, -53.7494730442248), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.055596318689, -53.7494730442248).
2025-08-03 09:37:31.009 [Thd =1]  Info Default located_pos:(-69.9310823029593, -53.7494730442248)
2025-08-03 09:37:33.714 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:33.727 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:33.727 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:33.727 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:33.727 [Thd =251]  Info Default located_pos:(62.049599262858, 72.7095437037533)
2025-08-03 09:37:33.727 [Thd =251]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:33.728 [Thd =251]  Info Default MoveStageForMarkCol102 point (-62.3506793668932, 72.7095437037533), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:33.728 [Thd =251]  Info Default located_pos:(-62.3506793668932, 72.7095437037533)
2025-08-03 09:37:33.728 [Thd =251]  Info Default deltax_stage 141.40105509956, deltay_stage:0.
2025-08-03 09:37:33.728 [Thd =251]  Info Default MoveStageForMarkCol101 point (62.0563049137855, -68.6915115548074), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:33.728 [Thd =251]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:33.728 [Thd =251]  Info Default MoveStageForMarkCol102 point (-62.3439737159657, -68.6915115548074), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0563049137855, -68.6915115548074).
2025-08-03 09:37:33.728 [Thd =251]  Info Default located_pos:(-62.3439737159657, -68.6915115548074)
2025-08-03 09:37:33.728 [Thd =251]  Info Default AliPt:(62.049599262858, 72.7095437037533), GDS2StagePt:(62.049599262858, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:33.728 [Thd =251]  Info Default AliPt:(-62.3506793668932, 72.7095437037555), GDS2StagePt:(-62.3506793668932, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:33.728 [Thd =251]  Info Default AliPt:(-62.3439737159732, -68.6915113958045), GDS2StagePt:(-62.3439737159657, -68.6915115548074), XOffset:5, YOffset:5
2025-08-03 09:37:33.737 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:33.737 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:33.737 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:33.737 [Thd =1]  Info Default deltax_stage 14.9114852658002, deltay_stage:0.
2025-08-03 09:37:33.737 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503064090312, 57.7980584211857), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:33.737 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59983102197977.
2025-08-03 09:37:33.737 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.650137431011, 57.7980584211857), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503064090312, 57.7980584211857).
2025-08-03 09:37:33.737 [Thd =1]  Info Default located_pos:(69.650137431011, 57.7980584211857)
2025-08-03 09:37:33.738 [Thd =1]  Info Default deltax_stage 126.459016605779, deltay_stage:0.
2025-08-03 09:37:33.738 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.055596318689, -53.7494730442248), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:33.738 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.986678621648.
2025-08-03 09:37:33.738 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9310823029593, -53.7494730442248), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.055596318689, -53.7494730442248).
2025-08-03 09:37:33.738 [Thd =1]  Info Default located_pos:(-69.9310823029593, -53.7494730442248)
2025-08-03 09:37:35.946 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:35.957 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:35.957 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:35.957 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:35.957 [Thd =211]  Info Default located_pos:(62.049599262858, 72.7095437037533)
2025-08-03 09:37:35.958 [Thd =211]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:35.958 [Thd =211]  Info Default MoveStageForMarkCol102 point (-62.3506793668932, 72.7095437037533), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:35.958 [Thd =211]  Info Default located_pos:(-62.3506793668932, 72.7095437037533)
2025-08-03 09:37:35.958 [Thd =211]  Info Default deltax_stage 141.40105509956, deltay_stage:0.
2025-08-03 09:37:35.958 [Thd =211]  Info Default MoveStageForMarkCol101 point (62.0563049137855, -68.6915115548074), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:35.958 [Thd =211]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:37:35.958 [Thd =211]  Info Default MoveStageForMarkCol102 point (-62.3439737159657, -68.6915115548074), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0563049137855, -68.6915115548074).
2025-08-03 09:37:35.958 [Thd =211]  Info Default located_pos:(-62.3439737159657, -68.6915115548074)
2025-08-03 09:37:35.958 [Thd =211]  Info Default AliPt:(62.049599262858, 72.7095437037533), GDS2StagePt:(62.049599262858, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:35.958 [Thd =211]  Info Default AliPt:(-62.3506793668932, 72.7095437037555), GDS2StagePt:(-62.3506793668932, 72.7095437037533), XOffset:5, YOffset:5
2025-08-03 09:37:35.958 [Thd =211]  Info Default AliPt:(-62.3439737159732, -68.6915113958045), GDS2StagePt:(-62.3439737159657, -68.6915115548074), XOffset:5, YOffset:5
2025-08-03 09:37:35.966 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:35.967 [Thd =1]  Info Default MaskScaleY:0.99999776021602
2025-08-03 09:37:35.967 [Thd =1]  Info Default MaskScaleX:0.999992538248323,Orth_Y_BeforR:0.163027990057365
2025-08-03 09:37:35.967 [Thd =1]  Info Default deltax_stage 14.9114852658002, deltay_stage:0.
2025-08-03 09:37:35.967 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503064090312, 57.7980584211857), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:35.967 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59983102197977.
2025-08-03 09:37:35.967 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.650137431011, 57.7980584211857), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503064090312, 57.7980584211857).
2025-08-03 09:37:35.967 [Thd =1]  Info Default located_pos:(69.650137431011, 57.7980584211857)
2025-08-03 09:37:35.967 [Thd =1]  Info Default deltax_stage 126.459016605779, deltay_stage:0.
2025-08-03 09:37:35.968 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.055596318689, -53.7494730442248), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:37:35.968 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.986678621648.
2025-08-03 09:37:35.968 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9310823029593, -53.7494730442248), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.055596318689, -53.7494730442248).
2025-08-03 09:37:35.968 [Thd =1]  Info Default located_pos:(-69.9310823029593, -53.7494730442248)
2025-08-03 09:37:46.970 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:37:47.204 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 09:38:04.387 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 09:38:04.431 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 09:38:04.431 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 09:38:04.431 [Thd =205]  Info Default Start [1/1]
2025-08-03 09:38:04.435 [Thd =224]  Info Default 开始检查！
2025-08-03 09:38:22.726 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 09:38:22.726 [Thd =206]  Info Default 初始化插件
2025-08-03 09:38:22.726 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 09:38:22.726 [Thd =187]  Info Default CurrentSize:2048,2048
2025-08-03 09:38:22.726 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 09:38:22.727 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 09:38:22.727 [Thd =187]  Info Default Camera size no change
2025-08-03 09:38:22.727 [Thd =179]  Info Default 设置 TDI 相机参数...
2025-08-03 09:38:22.727 [Thd =233]  Info Default CurrentSize:2048,2048
2025-08-03 09:38:22.727 [Thd =233]  Info Default Camera size no change
2025-08-03 09:38:22.727 [Thd =233]  Info Default Set camera size success
2025-08-03 09:38:22.728 [Thd =233]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 09:38:22.728 [Thd =187]  Info Default Set camera size success
2025-08-03 09:38:22.728 [Thd =187]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 09:38:22.729 [Thd =246]  Info Default 初始化DB目录
2025-08-03 09:38:22.848 [Thd =1]  Info Default deltax_stage 14.9114852658002, deltay_stage:0.
2025-08-03 09:38:22.848 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503064090312, 57.7980584211857), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:38:22.848 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59983102197977.
2025-08-03 09:38:22.848 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.650137431011, 57.7980584211857), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503064090312, 57.7980584211857).
2025-08-03 09:38:22.849 [Thd =1]  Info Default located_pos:(69.650137431011, 57.7980584211857)
2025-08-03 09:38:22.849 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.400278629751.
2025-08-03 09:38:22.849 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3506793668932, 72.7095437037533), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.049599262858, 72.7095437037533).
2025-08-03 09:38:22.849 [Thd =1]  Info Default located_pos:(-62.3506793668932, 72.7095437037533)
2025-08-03 09:38:22.849 [Thd =245]  Info Default 初始化DPU服务器！
2025-08-03 09:38:22.849 [Thd =207]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 09:38:30.164 [Thd =217]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427979,"ServiceStartTime":"2025\/8\/3 9:32:07","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:31.605 [Thd =233]  Info Default Set camera parameter
2025-08-03 09:38:31.606 [Thd =187]  Info Default Set camera parameter
2025-08-03 09:38:31.606 [Thd =233]  Info Default TriggerMode is On,dont set
2025-08-03 09:38:31.606 [Thd =233]  Info Default BUFFER_COUNT no change
2025-08-03 09:38:31.606 [Thd =187]  Info Default TriggerMode is On,dont set
2025-08-03 09:38:31.607 [Thd =187]  Info Default BUFFER_COUNT no change
2025-08-03 09:38:31.666 [Thd =228]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427980,"ServiceStartTime":"2025\/8\/3 9:32:07","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:31.667 [Thd =230]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427980,"ServiceStartTime":"2025\/8\/3 9:32:06","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:31.667 [Thd =191]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427980,"ServiceStartTime":"2025\/8\/3 9:33:03","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":34,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:32.694 [Thd =245]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427984,"ServiceStartTime":"2025\/8\/3 9:38:29","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:36.209 [Thd =211]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427985,"ServiceStartTime":"2025\/8\/3 9:38:30","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:36.211 [Thd =6]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427985,"ServiceStartTime":"2025\/8\/3 9:39:26","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:36.212 [Thd =174]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":427985,"ServiceStartTime":"2025\/8\/3 9:38:31","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 09:38:36.213 [Thd =207]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 09:39:00.528 [Thd =1]  Info Default Application starting...
2025-08-03 09:39:04.002 [Thd =1]  Info Default MainForm:begin.
2025-08-03 09:39:04.815 [Thd =1]  Info Default MainForm:end.
2025-08-03 09:39:04.853 [Thd =1]  Info Default MainForm_Load:begin onload.
2025-08-03 09:39:04.884 [Thd =1]  Info Default FormMain.UpdateTaskDataTable() m_Table_JobList_Running Updated! DataCount:0
2025-08-03 09:39:04.977 [Thd =1]  Info Default MainForm_Load:end onload.
2025-08-03 09:39:04.998 [Thd =1]  Info Default FormMain.UpdateTaskDataTable() m_Table_JobList_Running Updated! DataCount:0
2025-08-03 09:39:52.127 [Thd =19]  Info Default InitEnvirment begin time:
2025-08-03 09:39:52.129 [Thd =19]  Info Default InitEnvirment end time:
2025-08-03 09:39:52.129 [Thd =21]  Info Default APPLICATION LAUNCHED...
2025-08-03 09:39:52.130 [Thd =19]  Info Default PluginLoad begin time:
2025-08-03 09:39:52.138 [Thd =19]  Info Default PluginLoad end time:
2025-08-03 09:41:27.218 [Thd =19]  Info Default InitEnvirment begin time:
2025-08-03 09:41:27.220 [Thd =19]  Info Default InitEnvirment end time:
2025-08-03 09:41:27.220 [Thd =21]  Info Default APPLICATION LAUNCHED...
2025-08-03 09:41:27.221 [Thd =19]  Info Default PluginLoad begin time:
2025-08-03 09:41:27.229 [Thd =19]  Info Default PluginLoad end time:
2025-08-03 09:42:33.379 [Thd =19]  Info Default InitEnvirment begin time:
2025-08-03 09:42:33.380 [Thd =19]  Info Default InitEnvirment end time:
2025-08-03 09:42:33.380 [Thd =21]  Info Default APPLICATION LAUNCHED...
2025-08-03 09:42:33.381 [Thd =19]  Info Default PluginLoad begin time:
2025-08-03 09:42:33.389 [Thd =19]  Info Default PluginLoad end time:
2025-08-03 09:42:48.158 [Thd =18]  Info First found plugin {0} and init it.] PLCStandard
2025-08-03 09:42:49.216 [Thd =18]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 09:42:49.217 [Thd =18]  Info Default SetSystemStatus Success
2025-08-03 09:42:49.218 [Thd =18]  Info First found plugin {0} and init it.] VPMMS Focus00
2025-08-03 09:42:49.219 [Thd =24]  Info Default 缺少机械手插件，停止LOT在位监听线程
2025-08-03 09:42:49.220 [Thd =18]  Info VPMMSFocus MMS Initialize.
2025-08-03 09:42:49.372 [Thd =18]  Info First found plugin {0} and init it.] StandardACS
2025-08-03 09:42:49.373 [Thd =18]  Info Initialize ACS IP:10.0.0.100
2025-08-03 09:43:52.768 [Thd =18]  Info Default load Wafer setting :D:\VPTEK_AOI\VPTEKCONFIG\ACSStandardConfig.json
2025-08-03 09:43:52.787 [Thd =18]  Info Default aSwitchIndex index:0
2025-08-03 09:43:52.788 [Thd =18]  Info Default lens from ATF:
2025-08-03 09:43:52.788 [Thd =18]  Info Default objCount:3
2025-08-03 09:43:52.788 [Thd =18]  Info Default ratio:P200;objId:0
2025-08-03 09:43:52.788 [Thd =18]  Info Default ratio:P140;objId:1
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:P100;objId:2
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:;objId:0
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:;objId:0
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:;objId:0
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:;objId:0
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:;objId:0
2025-08-03 09:43:52.789 [Thd =18]  Info Default lens from system settings:
2025-08-03 09:43:52.789 [Thd =18]  Info Default systemlensettings lens count:3
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:P200;objId:0
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:P140;objId:1
2025-08-03 09:43:52.789 [Thd =18]  Info Default ratio:P100;objId:2
2025-08-03 09:43:52.793 [Thd =18]  Info Default VPMicroscope Initialize Success
2025-08-03 09:43:54.421 [Thd =18]  Error Default SyncSend recv cmd timeout
2025-08-03 09:43:54.421 [Thd =18]  Info Default LaserLamp:matchCode：FI91497,LaserSetting.MatchCode:hiZmXFL/G0c=
2025-08-03 09:43:54.427 [Thd =18]  Info Default LaserLamp 2:hiZmXFL/G0c=
2025-08-03 09:43:56.928 [Thd =18]  Error Default SyncSend recv cmd timeout
2025-08-03 09:43:56.929 [Thd =18]  Info Default LaserLamp 4:766.000000000044
2025-08-03 09:43:56.929 [Thd =18]  Info Default LaserLamp 8:10176
2025-08-03 09:43:56.929 [Thd =18]  Info Default LaserLamp 16:300
2025-08-03 09:43:56.930 [Thd =18]  Info Default LaserLamp MaxPower:300
2025-08-03 09:43:59.226 [Thd =18]  Info Default IKAP Camera initialize is true!
2025-08-03 09:43:59.229 [Thd =18]  Info Default CurrentBufferCount:50
2025-08-03 09:43:59.247 [Thd =18]  Info Default ConfigFile：D:\VPTEK_AOI\VPTEKCONFIG\config1_IKAP.js
2025-08-03 09:44:02.426 [Thd =18]  Info Default CurrentBufferCount:50
2025-08-03 09:44:02.432 [Thd =18]  Info Default ConfigFile：D:\VPTEK_AOI\VPTEKCONFIG\config0_IKAP.js
2025-08-03 09:44:04.392 [Thd =18]  Info Default Using camera: serial: 1839D009, name: TS5MSGV-36M, interface: GigEVision.
2025-08-03 09:44:06.502 [Thd =1]  Info LensSwitchService Initialize Lens Switch Service
2025-08-03 09:44:06.845 [Thd =20]  Info Default LaserLamp MaxPower:300,currentPower:0
2025-08-03 09:44:06.967 [Thd =1]  Info Default Initialize  System Service
2025-08-03 09:44:06.972 [Thd =1]  Info Default D:\VPTEK_AOI\StormData\DataPrepare
2025-08-03 09:44:07.975 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:44:09.328 [Thd =35]  Info Default initialize MCUHelper！
2025-08-03 09:44:09.343 [Thd =35]  Info Default MCUHelper.Init MCUSDK MCUIP:10.0.10.100,MCUPort:8000,LocalIP:,LocalPort:0
2025-08-03 09:44:09.400 [Thd =35]  Info Default Connecting to the MCU service succeeded!
2025-08-03 09:44:09.404 [Thd =42]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 09:44:09.948 [Thd =41]  Info Default Register MCU message：SUB_DEVICE_STATUS_CHANGE
2025-08-03 09:44:09.949 [Thd =43]  Info Default Register MCU message：SUB_RUNNING_EVENT
2025-08-03 09:44:11.952 [Thd =35]  Info Default Register MCU message：SUB_DEVICE_STATUS_CHANGE
2025-08-03 09:44:11.952 [Thd =1]  Info Default VPDMgtService:Storm.Common.VPDMgtServiceHelper,VPDMgtSdk:
2025-08-03 09:44:11.953 [Thd =43]  Info Default Register MCU message：SUB_DIE_DB_RESULT
2025-08-03 09:44:12.451 [Thd =1]  Info Default ===SystemSettingHelper:46967960
2025-08-03 09:44:12.766 [Thd =41]  Info Default CloseLamp Transmission
2025-08-03 09:44:13.570 [Thd =47]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 09:44:13.770 [Thd =41]  Info Default CloseLamp Reflection
2025-08-03 09:44:13.786 [Thd =51]  Info Default aSwitchIndex index:0
2025-08-03 09:44:13.786 [Thd =51]  Info Default lens from ATF:
2025-08-03 09:44:13.787 [Thd =51]  Info Default objCount:3
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:P200;objId:0
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:P140;objId:1
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:P100;objId:2
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:;objId:0
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:;objId:0
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:;objId:0
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:;objId:0
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:;objId:0
2025-08-03 09:44:13.787 [Thd =51]  Info Default lens from system settings:
2025-08-03 09:44:13.787 [Thd =51]  Info Default systemlensettings lens count:3
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:P200;objId:0
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:P140;objId:1
2025-08-03 09:44:13.787 [Thd =51]  Info Default ratio:P100;objId:2
2025-08-03 09:44:13.790 [Thd =51]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 09:44:13.827 [Thd =51]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 09:44:14.774 [Thd =41]  Info Default CloseLamp Reflection
2025-08-03 09:44:15.776 [Thd =41]  Info Default CloseLamp Transmission
2025-08-03 09:44:15.962 [Thd =42]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 09:44:18.794 [Thd =48]  Info Default OpenLamp Transmission
2025-08-03 09:44:18.825 [Thd =47]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 09:44:19.597 [Thd =46]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:44:20.326 [Thd =47]  Error Default SyncSend recv cmd timeout
2025-08-03 09:44:22.408 [Thd =48]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:44:24.802 [Thd =50]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:44:24.802 [Thd =50]  Info Default ChangeLightPath: False!
2025-08-03 09:56:26.173 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.Views.UCSetupMainMethodName:SelectProductSetup After Memory usage:682.6406MB VirtualMemorySize:134.2 GB
2025-08-03 09:56:26.289 [Thd =1]  Error Default SetProductSetup start
2025-08-03 09:56:26.362 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:56:28.131 [Thd =43]  Info MMSFocus _isStop = true 
2025-08-03 09:56:28.173 [Thd =43]  Info Default IKAP  Start of stream
2025-08-03 09:56:28.174 [Thd =43]  Info Default Preview Camera StartSnap
2025-08-03 09:56:28.214 [Thd =43]  Info Default IKAP End of stream
2025-08-03 09:56:28.214 [Thd =43]  Info Default Preview Camera StopSnap
2025-08-03 09:56:28.257 [Thd =43]  Info Default IKAP  Start of stream
2025-08-03 09:56:28.258 [Thd =43]  Info Default Preview Camera StartSnap
2025-08-03 09:56:28.262 [Thd =43]  Info Default camera_line StartTrigger
2025-08-03 09:56:37.500 [Thd =43]  Info Default m_focusMapMode：0
2025-08-03 09:56:37.502 [Thd =43]  Info Default Axis Y:5,PulseWidth:0.002,TriggerDistance:0.082975679542,BeginPoint:-175,EndPoint:0
2025-08-03 09:56:47.731 [Thd =43]  Info Default IKAP End of stream
2025-08-03 09:56:47.731 [Thd =43]  Info Default Preview Camera StopSnap
2025-08-03 09:56:48.435 [Thd =43]  Info Default RefLamp Rise: True!
2025-08-03 09:56:53.183 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:56:53.183 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:56:57.743 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:56:57.743 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:57:04.729 [Thd =51]  Info Default Chuck vacuum close
2025-08-03 09:57:05.729 [Thd =41]  Info Default ChuckVac: :False
2025-08-03 09:57:11.673 [Thd =1]  Info Default GetMarkPos  offsetX:686,offsety:341
2025-08-03 09:57:13.999 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:57:14.001 [Thd =48]  Info Default Chuck vacuum close
2025-08-03 09:57:15.002 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:57:25.224 [Thd =50]  Info Default Chuck vacuum close
2025-08-03 09:57:26.224 [Thd =41]  Info Default ChuckVac: :False
2025-08-03 09:57:30.140 [Thd =1]  Info Default GetMarkPos  offsetX:1102,offsety:340
2025-08-03 09:57:35.180 [Thd =1]  Info Default GetMarkPos  offsetX:613,offsety:511
2025-08-03 09:57:37.663 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:57:37.663 [Thd =41]  Info Default Chuck vacuum close
2025-08-03 09:57:38.665 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:57:48.700 [Thd =41]  Info Default Chuck vacuum close
2025-08-03 09:57:49.701 [Thd =43]  Info Default ChuckVac: :False
2025-08-03 09:57:56.299 [Thd =1]  Info Default GetMarkPos  offsetX:786,offsety:425
2025-08-03 09:58:01.231 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 09:58:01.231 [Thd =41]  Info Default Chuck vacuum close
2025-08-03 09:58:02.232 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:58:05.348 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 09:58:05.348 [Thd =51]  Warn Default 开始移入,移入过程中禁止操作
2025-08-03 09:58:18.663 [Thd =50]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 09:58:18.663 [Thd =50]  Info Default ChangeLightPath: False!
2025-08-03 09:58:18.663 [Thd =50]  Info Default RefLamp Down: True!
2025-08-03 09:58:18.663 [Thd =50]  Error Default RefLamp Down: : PLC ISwitch is NULL!
2025-08-03 09:58:19.551 [Thd =50]  Info MMSFocus _isStop = true 
2025-08-03 09:58:20.673 [Thd =50]  Error Default WindowCommand_Close debugMode:False
2025-08-03 09:58:20.673 [Thd =50]  Error Default WindowCommand_Close!
2025-08-03 09:58:20.674 [Thd =50]  Info Default StageBack 000
2025-08-03 09:58:20.675 [Thd =50]  Info Default StageBack 111
2025-08-03 09:58:20.734 [Thd =50]  Info Default StageBack Z
2025-08-03 09:58:21.743 [Thd =50]  Info Default StageBack XY:0,0
2025-08-03 09:58:23.823 [Thd =50]  Info Default  StageBack VectorA XY
2025-08-03 09:58:23.832 [Thd =50]  Info Default StageBack SetVelocity XY
2025-08-03 09:58:23.833 [Thd =48]  Info Default RefLamp Rise: True!
2025-08-03 09:58:23.833 [Thd =48]  Error Default RefLamp Rise: : PLC ISwitch is NULL!
2025-08-03 09:58:23.833 [Thd =44]  Info Default 移入完成
2025-08-03 09:58:25.874 [Thd =43]  Info Default Alignment ...
2025-08-03 09:58:25.996 [Thd =44]  Info Default Chuck vacuum close
2025-08-03 09:58:26.997 [Thd =46]  Info Default ChuckVac: :False
2025-08-03 09:58:32.059 [Thd =41]  Info Default Switch light...
2025-08-03 09:58:32.061 [Thd =46]  Info Default OpenLamp Transmission
2025-08-03 09:58:32.864 [Thd =48]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 09:58:35.675 [Thd =46]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 09:58:36.177 [Thd =46]  Info Default CloseLamp Reflection
2025-08-03 09:58:37.682 [Thd =46]  Info MMSFocus _isStop = true 
2025-08-03 09:58:37.683 [Thd =48]  Info Default Execute alignment 1/2
2025-08-03 09:58:42.820 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9998453,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:58:42.821 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:58:42.821 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:58:42.943 [Thd =46]  Info Default Flag:Fine1, Position:62.22387805684,73.21500129704
2025-08-03 09:58:52.649 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9998857,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:58:52.649 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:58:52.649 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:58:52.773 [Thd =46]  Info Default Flag:Fine2, Position:-62.17571784308,72.90276593036
2025-08-03 09:59:02.776 [Thd =43]  Info Default Execute alignment 2/2
2025-08-03 09:59:12.066 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9968223,xOffSet:582,yOffSet:520,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:12.066 [Thd =46]  Info Default D2DMatchMark ******** :errorX:-30,errorY:8
2025-08-03 09:59:13.707 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9979597,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:13.707 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:59:13.830 [Thd =46]  Info Default Flag:Fine1, Position:62.0519560176853,72.7157102992736
2025-08-03 09:59:23.531 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9967499,xOffSet:596,yOffSet:520,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:23.531 [Thd =46]  Info Default D2DMatchMark ******** :errorX:-16,errorY:8
2025-08-03 09:59:25.170 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9972359,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:25.170 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:59:25.293 [Thd =46]  Info Default Flag:Fine2, Position:-62.3480317274411,72.711629582218
2025-08-03 09:59:28.207 [Thd =44]  Info Default Checking Mark ...
2025-08-03 09:59:37.499 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9969833,xOffSet:611,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:37.500 [Thd =46]  Info Default D2DMatchMark ******** :errorX:-1,errorY:0
2025-08-03 09:59:37.500 [Thd =46]  Info Default D2DMatchMark ******** :errorX:-1,errorY:0,Successed:True
2025-08-03 09:59:37.623 [Thd =46]  Info Default Flag:Fine1, Position:62.0497314451071,72.7090679881552
2025-08-03 09:59:47.325 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9978192,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:47.325 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 09:59:47.325 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:59:47.449 [Thd =46]  Info Default Flag:Fine2, Position:-62.3502563669495,72.7090679881574
2025-08-03 09:59:57.822 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9951164,xOffSet:614,yOffSet:491,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:57.822 [Thd =46]  Info Default D2DMatchMark ******** :errorX:2,errorY:-21
2025-08-03 09:59:59.463 [Thd =46]  Info Default D2DSearchMark matchResult:0， score:0.9974057,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 09:59:59.463 [Thd =46]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 09:59:59.586 [Thd =46]  Info Default Flag:Fine3, Position:-62.3441338161095,-68.6914040122426
2025-08-03 10:00:00.587 [Thd =46]  Info Default IsAlignAngleOK fine1:62.0497314451071,72.7090679881552,fine2:-62.3502563669495,72.7090679881574
2025-08-03 10:00:00.588 [Thd =41]  Info Default Height difference : 0.10 um 
2025-08-03 10:00:00.588 [Thd =46]  Info Default IsAlignAngleOK delta:-7.50633279330405E-12.
2025-08-03 10:00:18.799 [Thd =46]  Info MMSFocus _isStop = true 
2025-08-03 10:00:18.799 [Thd =43]  Info Default Alignment finish 
2025-08-03 10:00:18.800 [Thd =41]  Info Default Chuck vacuum open
2025-08-03 10:00:19.801 [Thd =46]  Info Default ChuckVac: :True
2025-08-03 10:00:20.683 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:00:28.393 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:00:28.491 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 10:00:28.775 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 10:00:30.312 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 10:00:32.814 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:00:33.076 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:00:33.090 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:00:33.094 [Thd =1]  Info Default MaskScaleY:1.00000009797383
2025-08-03 10:00:33.094 [Thd =1]  Info Default MaskScaleX:0.999996661960223,Orth_Y_BeforR:0.148852256912439
2025-08-03 10:00:33.106 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:00:33.106 [Thd =1]  Info Default MaskScaleY:1.00000009797383
2025-08-03 10:00:33.106 [Thd =1]  Info Default MaskScaleX:0.999996661960223,Orth_Y_BeforR:0.148852256912439
2025-08-03 10:00:33.106 [Thd =44]  Info Default located_pos:(62.0497314451071, 72.7090679881552)
2025-08-03 10:00:33.108 [Thd =44]  Info Default deltax_stage 0, deltay_stage:-124.399987812057.
2025-08-03 10:00:33.108 [Thd =44]  Info Default MoveStageForMarkCol102 point (-62.3502563669495, 72.7090679881552), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0497314451071, 72.7090679881552).
2025-08-03 10:00:33.108 [Thd =44]  Info Default located_pos:(-62.3502563669495, 72.7090679881552)
2025-08-03 10:00:33.109 [Thd =44]  Info Default deltax_stage 141.4004720004, deltay_stage:0.
2025-08-03 10:00:33.109 [Thd =44]  Info Default MoveStageForMarkCol101 point (62.0558539959529, -68.691404144796), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.0497314451071, 72.7090679881552).
2025-08-03 10:00:33.109 [Thd =44]  Info Default deltax_stage 0, deltay_stage:-124.399987812057.
2025-08-03 10:00:33.109 [Thd =44]  Info Default MoveStageForMarkCol102 point (-62.3441338161038, -68.691404144796), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0558539959529, -68.691404144796).
2025-08-03 10:00:33.109 [Thd =44]  Info Default located_pos:(-62.3441338161038, -68.691404144796)
2025-08-03 10:00:33.110 [Thd =44]  Info Default AliPt:(62.0497314451071, 72.7090679881552), GDS2StagePt:(62.0497314451071, 72.7090679881552), XOffset:5, YOffset:5
2025-08-03 10:00:33.110 [Thd =44]  Info Default AliPt:(-62.3502563669495, 72.7090679881574), GDS2StagePt:(-62.3502563669495, 72.7090679881552), XOffset:5, YOffset:5
2025-08-03 10:00:33.110 [Thd =44]  Info Default AliPt:(-62.3441338161095, -68.6914040122426), GDS2StagePt:(-62.3441338161038, -68.691404144796), XOffset:5, YOffset:5
2025-08-03 10:00:33.113 [Thd =1]  Info Default deltax_stage 14.9114237749257, deltay_stage:0.
2025-08-03 10:00:33.113 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503771003087, 57.7976441992513), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0497314451071, 72.7090679881552).
2025-08-03 10:00:33.113 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59981325541718.
2025-08-03 10:00:33.113 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6501903557258, 57.7976441992513), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503771003087, 57.7976441992513).
2025-08-03 10:00:33.113 [Thd =1]  Info Default located_pos:(69.6501903557258, 57.7976441992513)
2025-08-03 10:00:33.113 [Thd =1]  Info Default deltax_stage 126.458495123487, deltay_stage:0.
2025-08-03 10:00:33.113 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0552070178214, -53.749427253876), GDS ref(5500000, 138400000), gdsObject(131958073, 138400000), stageRef(62.0497314451071, 72.7090679881552).
2025-08-03 10:00:33.113 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-131.98637006879.
2025-08-03 10:00:33.113 [Thd =1]  Info Default MoveStageForMarkCol102 point (-69.9311630509683, -53.749427253876), GDS ref(131958073, 138400000), gdsObject(131958073, 6413617), stageRef(62.0552070178214, -53.749427253876).
2025-08-03 10:00:33.113 [Thd =1]  Info Default located_pos:(-69.9311630509683, -53.749427253876)
2025-08-03 10:00:36.114 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:00:36.326 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:01:19.404 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:896.4531MB VirtualMemorySize:134.9 GB
2025-08-03 10:01:19.531 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:01:19.531 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:01:19.575 [Thd =50]  Info Default 设置光标定环境中，请等待......
2025-08-03 10:01:19.592 [Thd =44]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 10:01:19.597 [Thd =44]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:19.598 [Thd =44]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:19.607 [Thd =44]  Info Default SetDistortionPara disaabled
2025-08-03 10:01:19.759 [Thd =44]  Info MMSFocus _isStop = true 
2025-08-03 10:01:19.759 [Thd =44]  Info Default aSwitchIndex index:0
2025-08-03 10:01:19.759 [Thd =44]  Info Default lens from ATF:
2025-08-03 10:01:19.759 [Thd =44]  Info Default objCount:3
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:P200;objId:0
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:P140;objId:1
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:P100;objId:2
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:;objId:0
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:;objId:0
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:;objId:0
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:;objId:0
2025-08-03 10:01:19.759 [Thd =44]  Info Default ratio:;objId:0
2025-08-03 10:01:19.760 [Thd =44]  Info Default lens from system settings:
2025-08-03 10:01:19.760 [Thd =44]  Info Default systemlensettings lens count:3
2025-08-03 10:01:19.760 [Thd =44]  Info Default ratio:P200;objId:0
2025-08-03 10:01:19.760 [Thd =44]  Info Default ratio:P140;objId:1
2025-08-03 10:01:19.760 [Thd =44]  Info Default ratio:P100;objId:2
2025-08-03 10:01:19.762 [Thd =44]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:01:19.794 [Thd =44]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:01:19.802 [Thd =44]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:01:19.803 [Thd =44]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:01:19.803 [Thd =44]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:01:19.803 [Thd =44]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:01:19.803 [Thd =44]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:01:19.803 [Thd =44]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:01:19.803 [Thd =44]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:01:19.805 [Thd =44]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109845370622,StepStep:0.431712033071939,CosValueY:1,SinValueY:0
2025-08-03 10:01:20.058 [Thd =44]  Info strip vectorBegin:(6.418807,5.035723),VectorEnd:(1.113478,5.035723),CaptureBegin:(4.418807,5.035723)，CaptureEnd：(3.113478,5.035723),StepScan:0.435109845370622
2025-08-03 10:01:20.059 [Thd =44]  Info Default VectorBegin:(6.41880735462396,5.03572275058644)
2025-08-03 10:01:21.288 [Thd =41]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:01:21.289 [Thd =44]  Info Default SetMaxPower:300
2025-08-03 10:01:22.291 [Thd =50]  Info Default 打开光源，亮度：42%
2025-08-03 10:01:22.292 [Thd =34]  Info Default OpenLamp Transmission
2025-08-03 10:01:22.316 [Thd =43]  Info Default LaserLamp MaxPower:300,currentPower:126
2025-08-03 10:01:23.094 [Thd =46]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:01:23.817 [Thd =43]  Error Default SyncSend recv cmd timeout
2025-08-03 10:01:24.293 [Thd =44]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:01:24.293 [Thd =41]  Info Default 聚焦Track已关闭
2025-08-03 10:01:25.766 [Thd =44]  Info MMSFocus _isStop = true 
2025-08-03 10:01:25.905 [Thd =34]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:01:25.905 [Thd =34]  Info Default OpenLamp Reflection
2025-08-03 10:01:27.272 [Thd =44]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:01:27.272 [Thd =51]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:01:27.711 [Thd =34]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:01:30.276 [Thd =44]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:01:30.276 [Thd =41]  Info Default 聚焦Track已开启
2025-08-03 10:01:34.301 [Thd =35]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:01:34.301 [Thd =35]  Info Default ChangeLightPath: False!
2025-08-03 10:01:34.301 [Thd =35]  Info Default 标定中，请等待......
2025-08-03 10:01:34.307 [Thd =57]  Info Default CurrentSize:1,1
2025-08-03 10:01:34.308 [Thd =46]  Info Default CurrentSize:1,1
2025-08-03 10:01:34.322 [Thd =46]  Info Default Set camera size success
2025-08-03 10:01:34.322 [Thd =46]  Info Default Current:TDIStage：256，Target：TDI256
2025-08-03 10:01:34.323 [Thd =57]  Info Default Set camera size success
2025-08-03 10:01:34.323 [Thd =57]  Info Default Current:TDIStage：256，Target：TDI192
2025-08-03 10:01:35.780 [Thd =57]  Info Default Set camera parameter
2025-08-03 10:01:35.781 [Thd =57]  Info Default TriggerMode is On,dont set
2025-08-03 10:01:35.781 [Thd =57]  Info Default Set BUFFER_COUNT：50
2025-08-03 10:01:36.285 [Thd =46]  Info Default Set camera parameter
2025-08-03 10:01:36.285 [Thd =46]  Info Default TriggerMode is On,dont set
2025-08-03 10:01:36.285 [Thd =46]  Info Default Set BUFFER_COUNT：50
2025-08-03 10:01:38.343 [Thd =44]  Info Default scanStrips:1,LampResult:42
2025-08-03 10:01:38.344 [Thd =44]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:01:38.345 [Thd =44]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:38.385 [Thd =44]  Info Default m_focusMapMode：0
2025-08-03 10:01:38.388 [Thd =44]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:01:38.388 [Thd =44]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:38.607 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:38.610 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:39.471 [Thd =44]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:01:39.471 [Thd =44]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:39.496 [Thd =35]  Info Default LaserLamp MaxPower:300,currentPower:123
2025-08-03 10:01:39.890 [Thd =44]  Info Default m_focusMapMode：0
2025-08-03 10:01:39.891 [Thd =44]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:01:39.891 [Thd =44]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:40.103 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:40.107 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:40.963 [Thd =44]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:01:40.963 [Thd =44]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:40.997 [Thd =35]  Error Default SyncSend recv cmd timeout
2025-08-03 10:01:41.030 [Thd =57]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-08-03 10:01:41.380 [Thd =44]  Info Default m_focusMapMode：0
2025-08-03 10:01:41.381 [Thd =44]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:01:41.382 [Thd =44]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:41.594 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:41.597 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:42.449 [Thd =44]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:01:42.531 [Thd =57]  Error Default SyncSend recv cmd timeout
2025-08-03 10:01:42.829 [Thd =44]  Info Default AutoLightReturn:48,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:01:42.829 [Thd =44]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:01:42.829 [Thd =44]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:42.864 [Thd =46]  Info Default LaserLamp MaxPower:300,currentPower:144
2025-08-03 10:01:43.250 [Thd =44]  Info Default m_focusMapMode：0
2025-08-03 10:01:43.251 [Thd =44]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:01:43.252 [Thd =44]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:43.463 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:43.467 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:44.321 [Thd =44]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:01:44.323 [Thd =44]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:44.365 [Thd =46]  Error Default SyncSend recv cmd timeout
2025-08-03 10:01:44.381 [Thd =57]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 10:01:44.740 [Thd =44]  Info Default m_focusMapMode：0
2025-08-03 10:01:44.742 [Thd =44]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:01:44.743 [Thd =44]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:44.956 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:44.958 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:45.812 [Thd =44]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:01:45.812 [Thd =44]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:45.883 [Thd =57]  Error Default SyncSend recv cmd timeout
2025-08-03 10:01:45.915 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:01:46.232 [Thd =44]  Info Default m_focusMapMode：0
2025-08-03 10:01:46.233 [Thd =44]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:01:46.234 [Thd =44]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:01:46.446 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:46.449 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:47.300 [Thd =44]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:01:47.336 [Thd =44]  Info Default AutoLightReturn:46,trans_result:0,ref_result:4，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:01:47.336 [Thd =44]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:47.337 [Thd =44]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:47.337 [Thd =44]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:47.337 [Thd =44]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:01:47.416 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:01:47.538 [Thd =44]  Info Default Light Complete 5,ResultMessge:结果:46,下调反射光台阶数
2025-08-03 10:01:47.586 [Thd =43]  Warn Default 还原光源最大功率
2025-08-03 10:01:47.589 [Thd =35]  Info Default LaserLamp MaxPower:300
2025-08-03 10:01:48.591 [Thd =51]  Info Default OpenLamp Transmission
2025-08-03 10:01:49.282 [Thd =34]  Info MMSFocus _isStop = true 
2025-08-03 10:01:49.394 [Thd =57]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:01:50.398 [Thd =51]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:01:50.398 [Thd =51]  Info Default CloseLamp Reflection
2025-08-03 10:01:51.436 [Thd =41]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:01:51.787 [Thd =34]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:01:51.787 [Thd =46]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:01:52.936 [Thd =41]  Error Default SyncSend recv cmd timeout
2025-08-03 10:01:53.789 [Thd =34]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:01:53.789 [Thd =57]  Info Default 聚焦Track已关闭
2025-08-03 10:02:00.601 [Thd =43]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:02:00.638 [Thd =35]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:1387.711MB VirtualMemorySize:135.7 GB
2025-08-03 10:02:15.516 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:1389.906MB VirtualMemorySize:135.7 GB
2025-08-03 10:02:15.644 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:02:15.644 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:02:15.695 [Thd =50]  Info Default 设置光标定环境中，请等待......
2025-08-03 10:02:15.695 [Thd =53]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 10:02:15.696 [Thd =53]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:15.696 [Thd =53]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:15.699 [Thd =53]  Info Default SetDistortionPara disaabled
2025-08-03 10:02:16.610 [Thd =53]  Info MMSFocus _isStop = true 
2025-08-03 10:02:16.610 [Thd =53]  Info Default aSwitchIndex index:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default lens from ATF:
2025-08-03 10:02:16.611 [Thd =53]  Info Default objCount:3
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:P200;objId:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:P140;objId:1
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:P100;objId:2
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default lens from system settings:
2025-08-03 10:02:16.611 [Thd =53]  Info Default systemlensettings lens count:3
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:P200;objId:0
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:P140;objId:1
2025-08-03 10:02:16.611 [Thd =53]  Info Default ratio:P100;objId:2
2025-08-03 10:02:16.614 [Thd =53]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:02:16.648 [Thd =53]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:02:16.651 [Thd =53]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:02:16.651 [Thd =53]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:02:16.651 [Thd =53]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:02:16.652 [Thd =53]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:02:16.652 [Thd =53]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:02:16.652 [Thd =53]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:02:16.652 [Thd =53]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:02:16.652 [Thd =53]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109845370622,StepStep:0.431712033071939,CosValueY:1,SinValueY:0
2025-08-03 10:02:16.898 [Thd =53]  Info strip vectorBegin:(6.418807,5.035723),VectorEnd:(1.113478,5.035723),CaptureBegin:(4.418807,5.035723)，CaptureEnd：(3.113478,5.035723),StepScan:0.435109845370622
2025-08-03 10:02:16.898 [Thd =53]  Info Default VectorBegin:(6.41880735462396,5.03572275058644)
2025-08-03 10:02:18.125 [Thd =47]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:02:18.125 [Thd =53]  Info Default SetMaxPower:300
2025-08-03 10:02:19.127 [Thd =57]  Info Default 打开光源，亮度：46%
2025-08-03 10:02:19.127 [Thd =50]  Info Default OpenLamp Transmission
2025-08-03 10:02:19.157 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:02:19.931 [Thd =47]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:02:20.658 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:02:21.128 [Thd =53]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:02:21.128 [Thd =57]  Info Default 聚焦Track已关闭
2025-08-03 10:02:22.618 [Thd =53]  Info MMSFocus _isStop = true 
2025-08-03 10:02:22.742 [Thd =50]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:02:22.742 [Thd =50]  Info Default OpenLamp Reflection
2025-08-03 10:02:24.123 [Thd =53]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:02:24.123 [Thd =56]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:02:24.548 [Thd =50]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:02:27.126 [Thd =53]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:02:27.126 [Thd =34]  Info Default 聚焦Track已开启
2025-08-03 10:02:31.138 [Thd =35]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:02:31.138 [Thd =35]  Info Default ChangeLightPath: False!
2025-08-03 10:02:31.138 [Thd =35]  Info Default 标定中，请等待......
2025-08-03 10:02:31.138 [Thd =44]  Info Default CurrentSize:2048,2048
2025-08-03 10:02:31.138 [Thd =44]  Info Default Camera size no change
2025-08-03 10:02:31.138 [Thd =56]  Info Default CurrentSize:2048,2048
2025-08-03 10:02:31.138 [Thd =56]  Info Default Camera size no change
2025-08-03 10:02:31.139 [Thd =44]  Info Default Set camera size success
2025-08-03 10:02:31.140 [Thd =44]  Info Default Current:TDIStage：TDI256，Target：TDI248
2025-08-03 10:02:31.140 [Thd =56]  Info Default Set camera size success
2025-08-03 10:02:31.140 [Thd =56]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:02:32.594 [Thd =56]  Info Default Set camera parameter
2025-08-03 10:02:32.594 [Thd =56]  Info Default TriggerMode is On,dont set
2025-08-03 10:02:32.594 [Thd =56]  Info Default BUFFER_COUNT no change
2025-08-03 10:02:33.098 [Thd =44]  Info Default Set camera parameter
2025-08-03 10:02:33.098 [Thd =44]  Info Default TriggerMode is On,dont set
2025-08-03 10:02:33.098 [Thd =44]  Info Default BUFFER_COUNT no change
2025-08-03 10:02:33.103 [Thd =53]  Info Default scanStrips:1,LampResult:46
2025-08-03 10:02:33.103 [Thd =53]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:02:33.103 [Thd =53]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:33.144 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:02:33.146 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:02:33.146 [Thd =53]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:33.359 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:33.361 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:34.219 [Thd =53]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:02:34.219 [Thd =53]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:34.256 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:02:34.643 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:02:34.645 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:02:34.645 [Thd =53]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:34.859 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:34.862 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:35.713 [Thd =53]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:02:35.713 [Thd =53]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:35.757 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:02:35.773 [Thd =34]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 10:02:36.129 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:02:36.131 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:02:36.131 [Thd =53]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:36.345 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:36.348 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:37.202 [Thd =53]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:02:37.239 [Thd =53]  Info Default AutoLightReturn:48,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:02:37.239 [Thd =53]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:02:37.239 [Thd =53]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:37.273 [Thd =34]  Error Default SyncSend recv cmd timeout
2025-08-03 10:02:37.316 [Thd =46]  Info Default LaserLamp MaxPower:300,currentPower:144
2025-08-03 10:02:37.659 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:02:37.660 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:02:37.660 [Thd =53]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:37.873 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:37.876 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:38.730 [Thd =53]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:02:38.730 [Thd =53]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:38.817 [Thd =46]  Error Default SyncSend recv cmd timeout
2025-08-03 10:02:38.850 [Thd =35]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 10:02:39.155 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:02:39.156 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:02:39.156 [Thd =53]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:39.370 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:39.373 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:40.226 [Thd =53]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:02:40.226 [Thd =53]  Info Default strip.VectorBegin.X:6.41880735462396,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:40.350 [Thd =35]  Error Default SyncSend recv cmd timeout
2025-08-03 10:02:40.367 [Thd =57]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:02:40.639 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:02:40.641 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:02:40.641 [Thd =53]  Info Default strip.VectorBegin.X:1.1134778185121,strip.VectorBegin.Y:5.03572275058644
2025-08-03 10:02:40.854 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:40.857 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:41.709 [Thd =53]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:02:41.746 [Thd =53]  Info Default AutoLightReturn:46,trans_result:0,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:02:41.747 [Thd =53]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:41.747 [Thd =53]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:41.747 [Thd =53]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:41.747 [Thd =53]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\OpticalCalibration
2025-08-03 10:02:41.868 [Thd =57]  Error Default SyncSend recv cmd timeout
2025-08-03 10:02:41.949 [Thd =53]  Info Default Light Complete 5,ResultMessge:结果:46
2025-08-03 10:02:41.994 [Thd =47]  Warn Default 还原光源最大功率
2025-08-03 10:02:41.995 [Thd =35]  Info Default LaserLamp MaxPower:300
2025-08-03 10:02:42.996 [Thd =47]  Info Default OpenLamp Transmission
2025-08-03 10:02:43.135 [Thd =34]  Info MMSFocus _isStop = true 
2025-08-03 10:02:43.799 [Thd =56]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:02:44.803 [Thd =47]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:02:44.803 [Thd =47]  Info Default CloseLamp Reflection
2025-08-03 10:02:45.640 [Thd =34]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:02:45.640 [Thd =44]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:02:45.825 [Thd =41]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:02:47.327 [Thd =41]  Error Default SyncSend recv cmd timeout
2025-08-03 10:02:47.641 [Thd =34]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:02:47.641 [Thd =51]  Info Default 聚焦Track已关闭
2025-08-03 10:02:55.005 [Thd =50]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:02:55.041 [Thd =35]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:1387.566MB VirtualMemorySize:135.7 GB
2025-08-03 10:02:55.043 [Thd =34]  Info Default 光标定完成！
2025-08-03 10:02:58.900 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:02:59.408 [Thd =1]  Info Default ModuleBaseControl_Loaded：WaferStagePoint:3.75932560425334,5.18504093858644,,,AFCalibrationPoint:,
2025-08-03 10:03:00.860 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:Make0Calibration Before Memory usage:1401.004MB VirtualMemorySize:135.8 GB
2025-08-03 10:03:00.879 [Thd =53]  Info Default LineCameraStage:25
2025-08-03 10:03:00.880 [Thd =50]  Info Default CurrentSize:2048,2048
2025-08-03 10:03:00.880 [Thd =50]  Info Default Camera size no change
2025-08-03 10:03:00.881 [Thd =57]  Info Default CurrentSize:2048,2048
2025-08-03 10:03:00.881 [Thd =57]  Info Default Camera size no change
2025-08-03 10:03:00.882 [Thd =50]  Info Default Set camera size success
2025-08-03 10:03:00.882 [Thd =50]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:03:00.882 [Thd =57]  Info Default Set camera size success
2025-08-03 10:03:00.882 [Thd =57]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 10:03:02.333 [Thd =50]  Info Default Set camera parameter
2025-08-03 10:03:02.333 [Thd =50]  Info Default TriggerMode is On,dont set
2025-08-03 10:03:02.333 [Thd =50]  Info Default BUFFER_COUNT no change
2025-08-03 10:03:02.838 [Thd =57]  Info Default Set camera parameter
2025-08-03 10:03:02.838 [Thd =57]  Info Default TriggerMode is On,dont set
2025-08-03 10:03:02.838 [Thd =57]  Info Default BUFFER_COUNT no change
2025-08-03 10:03:02.847 [Thd =53]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:03:02.847 [Thd =53]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:03:02.848 [Thd =53]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:03:02.848 [Thd =53]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:03:02.848 [Thd =53]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:03:02.848 [Thd =53]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:03:02.848 [Thd =53]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:03:02.848 [Thd =53]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109845370622,StepStep:0.431712033071939,CosValueY:1,SinValueY:0
2025-08-03 10:03:03.094 [Thd =53]  Info strip vectorBegin:(6.418807,5.035723),VectorEnd:(1.113478,5.035723),CaptureBegin:(4.418807,5.035723)，CaptureEnd：(3.113478,5.035723),StepScan:0.435109845370622
2025-08-03 10:03:03.094 [Thd =53]  Info Default Calibreation AreaToLinePoint:(3.98369750925334,5.03572275058644)
2025-08-03 10:03:03.094 [Thd =41]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:03:03.094 [Thd =53]  Info Default SetMaxPower:300
2025-08-03 10:03:04.095 [Thd =44]  Info Default 打开光源，亮度：46%
2025-08-03 10:03:04.095 [Thd =43]  Info Default OpenLamp Transmission
2025-08-03 10:03:04.126 [Thd =46]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:03:04.899 [Thd =41]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:03:05.627 [Thd =46]  Error Default SyncSend recv cmd timeout
2025-08-03 10:03:06.016 [Thd =53]  Info MMSFocus _isStop = true 
2025-08-03 10:03:07.521 [Thd =53]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:03:07.521 [Thd =41]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:03:07.710 [Thd =43]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:03:07.710 [Thd =43]  Info Default OpenLamp Reflection
2025-08-03 10:03:09.516 [Thd =43]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:03:16.106 [Thd =50]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:03:16.106 [Thd =50]  Info Default ChangeLightPath: False!
2025-08-03 10:03:16.108 [Thd =44]  Info Default 设置Make0标定环境中,请等待......
2025-08-03 10:03:19.004 [Thd =43]  Info Default 标定中，请稍等......
2025-08-03 10:03:21.010 [Thd =53]  Info MMSFocus _isStop = true 
2025-08-03 10:03:22.132 [Thd =44]  Warn Default Optimum:0.900um
2025-08-03 10:03:24.819 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:24.821 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:26.026 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:26.027 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:27.241 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:27.243 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:28.458 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:28.460 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:29.668 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:29.669 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:30.878 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:30.880 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:32.084 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:32.086 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:33.298 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:33.300 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:34.510 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:34.513 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:35.729 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:35.731 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:36.935 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:03:36.937 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-4.41880735462396,EndPoint:-3.1134778185121
2025-08-03 10:03:37.510 [Thd =53]  Info Default FitPosition:1.2631434239227,score:47.2464198987211
2025-08-03 10:03:37.510 [Thd =53]  Info Default FitPosition:1.16230556819755,score:132.8833255203
2025-08-03 10:03:37.510 [Thd =47]  Info Default Restore,Please wait......
2025-08-03 10:03:37.510 [Thd =53]  Info Default LaserLamp MaxPower:300
2025-08-03 10:03:37.511 [Thd =34]  Warn Default 还原光源最大功率
2025-08-03 10:03:38.511 [Thd =44]  Info Default OpenLamp Transmission
2025-08-03 10:03:38.511 [Thd =51]  Info MMSFocus _isStop = true 
2025-08-03 10:03:39.314 [Thd =34]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:03:40.318 [Thd =44]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:03:40.318 [Thd =44]  Info Default CloseLamp Reflection
2025-08-03 10:03:41.338 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:03:42.839 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:03:50.522 [Thd =43]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:03:50.606 [Thd =46]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:<Make0Calibration>b__23_1 End Memory usage:1501.734MB VirtualMemorySize:136.8 GB
2025-08-03 10:03:55.411 [Thd =1]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:03:55.654 [Thd =1]  Info Default make0 AreaToLinePoint:(3.98369750925334,5.03572275058644)
2025-08-03 10:03:55.715 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:ButtonMake_Click Before Memory usage:1500.902MB VirtualMemorySize:136.8 GB
2025-08-03 10:03:56.526 [Thd =47]  Info MMSFocus _isStop = true 
2025-08-03 10:03:59.674 [Thd =47]  Info Default 保存AF标定结果成功！
2025-08-03 10:03:59.963 [Thd =51]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0+<>c__DisplayClass33_0MethodName:<ButtonMake_Click>b__1 End Memory usage:1500.988MB VirtualMemorySize:136.8 GB
2025-08-03 10:03:59.964 [Thd =51]  Info Default SavePoint：WaferStagePoint:3.75932560425334,5.18504093858644,,,AFCalibrationPoint:67524026.9862728,66112505.7187879
2025-08-03 10:04:04.991 [Thd =57]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:04:04.991 [Thd =35]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:04:06.993 [Thd =57]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:04:06.993 [Thd =53]  Info Default 聚焦Track已关闭
2025-08-03 10:04:23.003 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:1502.609MB VirtualMemorySize:136.8 GB
2025-08-03 10:04:23.107 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click End Memory usage:1502.656MB VirtualMemorySize:136.8 GB
2025-08-03 10:04:25.585 [Thd =43]  Info Default 设置平场校正环境中......
2025-08-03 10:04:25.586 [Thd =53]  Info Default Flatfield Corrention Init******************
2025-08-03 10:04:25.980 [Thd =53]  Info MMSFocus _isStop = true 
2025-08-03 10:04:25.980 [Thd =53]  Info Default aSwitchIndex index:0
2025-08-03 10:04:25.981 [Thd =53]  Info Default lens from ATF:
2025-08-03 10:04:25.981 [Thd =53]  Info Default objCount:3
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:P200;objId:0
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:P140;objId:1
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:P100;objId:2
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:04:25.981 [Thd =53]  Info Default ratio:;objId:0
2025-08-03 10:04:25.981 [Thd =53]  Info Default lens from system settings:
2025-08-03 10:04:25.981 [Thd =53]  Info Default systemlensettings lens count:3
2025-08-03 10:04:25.982 [Thd =53]  Info Default ratio:P200;objId:0
2025-08-03 10:04:25.982 [Thd =53]  Info Default ratio:P140;objId:1
2025-08-03 10:04:25.982 [Thd =53]  Info Default ratio:P100;objId:2
2025-08-03 10:04:25.985 [Thd =53]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:04:26.029 [Thd =53]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:04:26.032 [Thd =53]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:04:26.033 [Thd =53]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:04:26.033 [Thd =53]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:04:26.033 [Thd =53]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:04:26.033 [Thd =53]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:04:26.033 [Thd =53]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:04:26.033 [Thd =53]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:04:26.033 [Thd =53]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109845370622,StepStep:0.431712033071939,CosValueY:1,SinValueY:0
2025-08-03 10:04:26.279 [Thd =53]  Info strip vectorBegin:(-10.464861,71.681605),VectorEnd:(-15.77019,71.681605),CaptureBegin:(-12.464861,71.681605)，CaptureEnd：(-13.77019,71.681605),StepScan:0.435109845370622
2025-08-03 10:04:26.981 [Thd =43]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:04:26.981 [Thd =53]  Info Default SetMaxPower:300
2025-08-03 10:04:27.982 [Thd =34]  Info Default 打开光源，亮度：46%
2025-08-03 10:04:27.982 [Thd =51]  Info Default OpenLamp Transmission
2025-08-03 10:04:28.012 [Thd =46]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:04:28.786 [Thd =47]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:04:29.514 [Thd =46]  Error Default SyncSend recv cmd timeout
2025-08-03 10:04:29.983 [Thd =53]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:04:29.983 [Thd =34]  Info Default 聚焦Track已关闭
2025-08-03 10:04:31.597 [Thd =51]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:04:31.597 [Thd =51]  Info Default OpenLamp Reflection
2025-08-03 10:04:31.988 [Thd =53]  Info MMSFocus _isStop = true 
2025-08-03 10:04:33.402 [Thd =51]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:04:33.492 [Thd =53]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:04:33.492 [Thd =46]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:04:36.497 [Thd =53]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:04:36.497 [Thd =34]  Info Default 聚焦Track已开启
2025-08-03 10:04:39.993 [Thd =35]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:04:39.993 [Thd =35]  Info Default ChangeLightPath: False!
2025-08-03 10:04:39.993 [Thd =44]  Info Default Open lamp，Power:46%
2025-08-03 10:04:39.994 [Thd =53]  Info Default OpenLamp Transmission
2025-08-03 10:04:40.797 [Thd =47]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:04:40.998 [Thd =53]  Info Default OpenLamp Reflection
2025-08-03 10:04:42.804 [Thd =53]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:04:42.815 [Thd =51]  Info Default 平场校正中,请等待 ......
2025-08-03 10:04:42.815 [Thd =44]  Info Default 扫描图片......
2025-08-03 10:04:42.818 [Thd =53]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:192
2025-08-03 10:04:42.818 [Thd =53]  Info Default CurrentSize:2048,2048
2025-08-03 10:04:42.818 [Thd =53]  Info Default Camera size no change
2025-08-03 10:04:42.818 [Thd =57]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:248
2025-08-03 10:04:42.818 [Thd =57]  Info Default CurrentSize:2048,2048
2025-08-03 10:04:42.818 [Thd =57]  Info Default Camera size no change
2025-08-03 10:04:42.819 [Thd =53]  Info Default Set camera size success
2025-08-03 10:04:42.819 [Thd =53]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:04:42.820 [Thd =57]  Info Default Set camera size success
2025-08-03 10:04:42.820 [Thd =57]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 10:04:44.270 [Thd =53]  Info Default Set camera parameter
2025-08-03 10:04:44.270 [Thd =53]  Info Default TriggerMode is On,dont set
2025-08-03 10:04:44.270 [Thd =53]  Info Default BUFFER_COUNT no change
2025-08-03 10:04:44.775 [Thd =57]  Info Default Set camera parameter
2025-08-03 10:04:44.775 [Thd =57]  Info Default TriggerMode is On,dont set
2025-08-03 10:04:44.775 [Thd =57]  Info Default BUFFER_COUNT no change
2025-08-03 10:04:49.778 [Thd =53]  Info Default FlatfieldCorrention scanStrips:1,Intensity:46
2025-08-03 10:04:49.778 [Thd =53]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:0,Light:46
2025-08-03 10:04:49.778 [Thd =53]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4648606606036,strip.VectorBegin.Y:71.6816046173305
2025-08-03 10:04:50.116 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:04:50.118 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:12.4648606606036,EndPoint:13.7701901967155
2025-08-03 10:04:50.118 [Thd =53]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7701901967155,strip.VectorBegin.Y:71.6816046173305
2025-08-03 10:04:50.329 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\Flatfield
2025-08-03 10:04:50.329 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\Flatfield
2025-08-03 10:04:51.184 [Thd =53]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:1,Light:45
2025-08-03 10:04:51.184 [Thd =53]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4648606606036,strip.VectorBegin.Y:71.6816046173305
2025-08-03 10:04:51.200 [Thd =44]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:04:51.605 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:04:51.606 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:12.4648606606036,EndPoint:13.7701901967155
2025-08-03 10:04:51.607 [Thd =53]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7701901967155,strip.VectorBegin.Y:71.6816046173305
2025-08-03 10:04:51.817 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\Flatfield
2025-08-03 10:04:51.817 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\Flatfield
2025-08-03 10:04:52.676 [Thd =53]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:2,Light:46
2025-08-03 10:04:52.676 [Thd =53]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4648606606036,strip.VectorBegin.Y:71.6816046173305
2025-08-03 10:04:52.701 [Thd =44]  Error Default SyncSend recv cmd timeout
2025-08-03 10:04:52.717 [Thd =46]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:04:53.098 [Thd =53]  Info Default m_focusMapMode：0
2025-08-03 10:04:53.100 [Thd =53]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:12.4648606606036,EndPoint:13.7701901967155
2025-08-03 10:04:53.100 [Thd =53]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7701901967155,strip.VectorBegin.Y:71.6816046173305
2025-08-03 10:04:53.310 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\Flatfield
2025-08-03 10:04:53.310 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6242255-yxc-03\rcp_DB_1\Flatfield
2025-08-03 10:04:54.218 [Thd =46]  Error Default SyncSend recv cmd timeout
2025-08-03 10:04:54.363 [Thd =57]  Warn Default 还原光源最大功率
2025-08-03 10:04:54.363 [Thd =53]  Info Default LaserLamp MaxPower:300
2025-08-03 10:04:55.364 [Thd =47]  Info Default OpenLamp Transmission
2025-08-03 10:04:55.507 [Thd =44]  Info MMSFocus _isStop = true 
2025-08-03 10:04:56.168 [Thd =51]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:04:57.173 [Thd =47]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:04:57.174 [Thd =47]  Info Default CloseLamp Reflection
2025-08-03 10:04:58.013 [Thd =44]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:04:58.014 [Thd =43]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:04:58.202 [Thd =46]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:04:59.702 [Thd =46]  Error Default SyncSend recv cmd timeout
2025-08-03 10:05:00.015 [Thd =44]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:05:00.015 [Thd =42]  Info Default 聚焦Track已关闭
2025-08-03 10:05:07.376 [Thd =34]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:05:07.376 [Thd =57]  Info Default 平场校正中,请等待 ......
2025-08-03 10:05:08.851 [Thd =57]  Info Default 校正完成
2025-08-03 10:05:20.103 [Thd =1]  Info flatfieldbtn Ok_Click  begin
2025-08-03 10:05:20.104 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm begin
2025-08-03 10:05:20.115 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy begin
2025-08-03 10:05:20.115 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy end
2025-08-03 10:05:20.115 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm end
2025-08-03 10:05:20.115 [Thd =1]  Info ExecuteSuccess  begin
2025-08-03 10:05:20.115 [Thd =1]  Info ExecuteSuccess  end
2025-08-03 10:05:21.305 [Thd =1]  Info flatfield btnOk_Click  end
2025-08-03 10:05:22.581 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnXYCalib_Click Before Memory usage:1590.508MB VirtualMemorySize:137.2 GB
2025-08-03 10:05:22.752 [Thd =42]  Info Default 设置RTB 标定环境中,请等待 ......
2025-08-03 10:05:22.753 [Thd =47]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 10:05:22.759 [Thd =47]  Info Default SetDistortionPara disaabled
2025-08-03 10:05:23.392 [Thd =47]  Info MMSFocus _isStop = true 
2025-08-03 10:05:23.393 [Thd =47]  Info Default aSwitchIndex index:0
2025-08-03 10:05:23.393 [Thd =47]  Info Default lens from ATF:
2025-08-03 10:05:23.393 [Thd =47]  Info Default objCount:3
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:P200;objId:0
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:P140;objId:1
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:P100;objId:2
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:;objId:0
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:;objId:0
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:;objId:0
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:;objId:0
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:;objId:0
2025-08-03 10:05:23.393 [Thd =47]  Info Default lens from system settings:
2025-08-03 10:05:23.393 [Thd =47]  Info Default systemlensettings lens count:3
2025-08-03 10:05:23.393 [Thd =47]  Info Default ratio:P200;objId:0
2025-08-03 10:05:23.394 [Thd =47]  Info Default ratio:P140;objId:1
2025-08-03 10:05:23.394 [Thd =47]  Info Default ratio:P100;objId:2
2025-08-03 10:05:23.397 [Thd =47]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:05:23.429 [Thd =47]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:05:23.432 [Thd =47]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:05:23.432 [Thd =47]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:05:23.433 [Thd =47]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:05:23.433 [Thd =47]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:05:23.433 [Thd =47]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:05:23.433 [Thd =47]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:05:23.433 [Thd =47]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:05:23.433 [Thd =47]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109845370622,StepStep:0.431712033071939,CosValueY:1,SinValueY:0
2025-08-03 10:05:23.434 [Thd =47]  Info Default deltax_stage 22.6110754766693, deltay_stage:0.
2025-08-03 10:05:23.434 [Thd =47]  Info Default MoveStageForMarkCol101 point (62.0507104903488, 50.0979924902899), GDS ref(5500000, 138400000), gdsObject(28111000, 138400000), stageRef(62.0497314451071, 72.7090679881552).
2025-08-03 10:05:23.434 [Thd =47]  Info Default deltax_stage 0, deltay_stage:-123.225987927078.
2025-08-03 10:05:23.434 [Thd =47]  Info Default MoveStageForMarkCol102 point (-61.1752774367291, 50.0979924902899), GDS ref(28111000, 138400000), gdsObject(28111000, 15174000), stageRef(62.0507104903488, 50.0979924902899).
2025-08-03 10:05:23.434 [Thd =47]  Info Default located_pos:(-61.1752774367291, 50.0979924902899)
2025-08-03 10:05:30.227 [Thd =47]  Info strip vectorBegin:(-58.515796,49.948674),VectorEnd:(-63.821125,49.948674),CaptureBegin:(-60.515796,49.948674)，CaptureEnd：(-61.821125,49.948674),StepScan:0.435109845370622
2025-08-03 10:05:30.227 [Thd =47]  Info Default VectorBegin:(-58.5157956863585,49.9486743022899)
2025-08-03 10:05:31.455 [Thd =44]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:05:31.455 [Thd =47]  Info Default SetMaxPower:300
2025-08-03 10:05:32.456 [Thd =53]  Info Default 打开光源，亮度：46%
2025-08-03 10:05:32.456 [Thd =51]  Info Default OpenLamp Transmission
2025-08-03 10:05:32.477 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:05:33.261 [Thd =50]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:05:33.978 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:05:34.457 [Thd =47]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:05:34.457 [Thd =53]  Info Default 聚焦Track已关闭
2025-08-03 10:05:36.073 [Thd =51]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:05:36.073 [Thd =51]  Info Default OpenLamp Reflection
2025-08-03 10:05:36.405 [Thd =47]  Info MMSFocus _isStop = true 
2025-08-03 10:05:37.879 [Thd =51]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:05:37.910 [Thd =47]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:05:37.910 [Thd =34]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:05:40.912 [Thd =47]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:05:40.912 [Thd =53]  Info Default 聚焦Track已开启
2025-08-03 10:05:44.469 [Thd =35]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:05:44.469 [Thd =35]  Info Default ChangeLightPath: False!
2025-08-03 10:05:44.469 [Thd =35]  Info Default RTB 标定中,请等待 ......
2025-08-03 10:05:44.472 [Thd =34]  Info Default CurrentSize:2048,2048
2025-08-03 10:05:44.472 [Thd =34]  Info Default Camera size no change
2025-08-03 10:05:44.472 [Thd =56]  Info Default CurrentSize:2048,2048
2025-08-03 10:05:44.473 [Thd =56]  Info Default Camera size no change
2025-08-03 10:05:44.474 [Thd =34]  Info Default Set camera size success
2025-08-03 10:05:44.477 [Thd =34]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 10:05:44.477 [Thd =56]  Info Default Set camera size success
2025-08-03 10:05:44.477 [Thd =56]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:05:45.928 [Thd =34]  Info Default Set camera parameter
2025-08-03 10:05:45.929 [Thd =34]  Info Default TriggerMode is On,dont set
2025-08-03 10:05:45.929 [Thd =34]  Info Default BUFFER_COUNT no change
2025-08-03 10:05:46.432 [Thd =56]  Info Default Set camera parameter
2025-08-03 10:05:46.433 [Thd =56]  Info Default TriggerMode is On,dont set
2025-08-03 10:05:46.433 [Thd =56]  Info Default BUFFER_COUNT no change
2025-08-03 10:05:46.441 [Thd =47]  Info Default SetDistortionPara disaabled
2025-08-03 10:05:46.441 [Thd =47]  Info Default scanStrips:1
2025-08-03 10:05:46.482 [Thd =47]  Info Default m_focusMapMode：0
2025-08-03 10:05:46.484 [Thd =47]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:60.5157956863585,EndPoint:61.8211252224703
2025-08-03 10:05:47.591 [Thd =47]  Info Default Get_Tolerance_and_Rounding:******Tolerance********
2025-08-03 10:05:50.297 [Thd =47]  Info Default Get_Tolerance_and_Rounding:-----------Tolerance-------------
2025-08-03 10:05:50.344 [Thd =53]  Warn Default 还原光源最大功率
2025-08-03 10:05:50.344 [Thd =50]  Info Default LaserLamp MaxPower:300
2025-08-03 10:05:51.345 [Thd =44]  Info Default OpenLamp Transmission
2025-08-03 10:05:51.919 [Thd =47]  Info MMSFocus _isStop = true 
2025-08-03 10:05:52.149 [Thd =35]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:05:53.153 [Thd =44]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:05:53.153 [Thd =44]  Info Default CloseLamp Reflection
2025-08-03 10:05:54.191 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:05:54.424 [Thd =47]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:05:54.424 [Thd =35]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:05:55.691 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:05:56.426 [Thd =47]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:05:56.426 [Thd =55]  Info Default 聚焦Track已关闭
2025-08-03 10:06:03.357 [Thd =53]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:06:03.358 [Thd =44]  Info Default 公差标定完成
2025-08-03 10:06:03.401 [Thd =50]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:<btnXYCalib_Click>b__28_1 Before Memory usage:1614.598MB VirtualMemorySize:137.3 GB
2025-08-03 10:06:10.929 [Thd =1]  Info Default CDdefectResolution is 0.2
2025-08-03 10:06:10.929 [Thd =1]  Info Default CDdefectResolutionBil is 0.25
2025-08-03 10:06:10.929 [Thd =1]  Info Default PHdefectResolution is 0.2
2025-08-03 10:06:20.640 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 10:06:20.678 [Thd =39]  Info Default Start [1/1]
2025-08-03 10:06:20.678 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 10:06:20.686 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 10:06:20.690 [Thd =55]  Info Default 开始检查！
2025-08-03 10:06:20.790 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:20411374,145999815 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 10:06:20.791 [Thd =46]  Info Default 初始化插件
2025-08-03 10:06:20.791 [Thd =50]  Info Default 初始化DB目录
2025-08-03 10:06:20.791 [Thd =35]  Info Default 设置 TDI 相机参数...
2025-08-03 10:06:20.791 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 10:06:20.792 [Thd =51]  Info Default CurrentSize:2048,2048
2025-08-03 10:06:20.792 [Thd =56]  Info Default CurrentSize:2048,2048
2025-08-03 10:06:20.792 [Thd =56]  Info Default Camera size no change
2025-08-03 10:06:20.792 [Thd =51]  Info Default Camera size no change
2025-08-03 10:06:20.793 [Thd =56]  Info Default Set camera size success
2025-08-03 10:06:20.793 [Thd =56]  Info Default Current:TDIStage：TDI248，Target：TDI248
2025-08-03 10:06:20.794 [Thd =51]  Info Default Set camera size success
2025-08-03 10:06:20.794 [Thd =51]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:06:20.795 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 10:06:20.795 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 10:06:20.918 [Thd =1]  Info Default deltax_stage 14.9114237749257, deltay_stage:0.
2025-08-03 10:06:20.918 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0503771003087, 57.7976441992513), GDS ref(5500000, 138400000), gdsObject(20411374, 138400000), stageRef(62.0497314451071, 72.7090679881552).
2025-08-03 10:06:20.918 [Thd =1]  Info Default deltax_stage 0, deltay_stage:7.59981325541718.
2025-08-03 10:06:20.918 [Thd =1]  Info Default MoveStageForMarkCol102 point (69.6501903557258, 57.7976441992513), GDS ref(20411374, 138400000), gdsObject(20411374, 145999814), stageRef(62.0503771003087, 57.7976441992513).
2025-08-03 10:06:20.918 [Thd =1]  Info Default located_pos:(69.6501903557258, 57.7976441992513)
2025-08-03 10:06:20.918 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.399987812057.
2025-08-03 10:06:20.918 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3502563669495, 72.7090679881552), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0497314451071, 72.7090679881552).
2025-08-03 10:06:20.919 [Thd =1]  Info Default located_pos:(-62.3502563669495, 72.7090679881552)
2025-08-03 10:06:20.919 [Thd =57]  Info Default Measuring the height difference of inspection area
2025-08-03 10:06:22.245 [Thd =56]  Info Default Set camera parameter
2025-08-03 10:06:22.246 [Thd =56]  Info Default TriggerMode is On,dont set
2025-08-03 10:06:22.246 [Thd =56]  Info Default BUFFER_COUNT no change
2025-08-03 10:06:22.748 [Thd =51]  Info Default Set camera parameter
2025-08-03 10:06:22.749 [Thd =51]  Info Default TriggerMode is On,dont set
2025-08-03 10:06:22.749 [Thd =51]  Info Default BUFFER_COUNT no change
2025-08-03 10:06:28.020 [Thd =53]  Info Default 初始化DPU服务器！
2025-08-03 10:06:28.021 [Thd =51]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 10:06:30.387 [Thd =41]  Info MMSFocus _isStop = true 
2025-08-03 10:06:35.544 [Thd =51]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 10:06:35.576 [Thd =1]  Info Default Register inspect event！
2025-08-03 10:06:35.597 [Thd =55]  Info Default 初始化检测数据
2025-08-03 10:06:35.599 [Thd =1]  Info Default initial*****Light_intensity:46, min:10, max:220
2025-08-03 10:06:35.600 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 10:06:35.600 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 10:06:35.601 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3502563669495, reference point Stage_Y: 72.7090679881552, starting point GDS_X: 20411374, starting point GDS_Y: 145999815
2025-08-03 10:06:35.615 [Thd =46]  Info Default m_start_strip_no:0
2025-08-03 10:06:35.616 [Thd =46]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 10:06:35.643 [Thd =46]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\B166957A870D9985309A2463F6991AC5.oas","m_layerMode":0,"m_layerNo":10,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1042,"m_col":1325,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":20411374,"m_beginY":145999815,"m_endX":131958073,"m_endY":6413616,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1284,"m_tolerance_mode":0,"m_x_tolerance":-0.098,"m_y_tolerance":-0.096,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6242255-YXC-01\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":261,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.35,"m_optical_head_id":0,"m_outer_round":0.35,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,223,3,0,1130102784,1065353216,1065353216,1,2060,10752],"m_R_collect":[200,204,106,0,1128792064,1065353216,1065353216,6,0,0],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.146,"m_y_tolerance_R":-0.18,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 10:06:35.649 [Thd =46]  Info Default m_line_camera_cols:321
2025-08-03 10:06:35.650 [Thd =46]  Info Default AllocHGlobal img mem pic_count:321, img_w:2032, img_h:2048
2025-08-03 10:06:35.651 [Thd =46]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 10:06:35.654 [Thd =46]  Info Default SetDistortionPara disaabled
2025-08-03 10:06:35.654 [Thd =46]  Info Default Set distortion correction parameters End
2025-08-03 10:06:35.654 [Thd =46]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1042,pic_count(Grid2.Cols):1284,pic_count_pack(Grid.Cols):1325,max_batch:20,mode:0,m_channel:4 
2025-08-03 10:06:35.998 [Thd =46]  Info Default InitDie2DBRes Success!!!!
2025-08-03 10:06:41.268 [Thd =41]  Info Default DemarcateInspectZ:2.8
2025-08-03 10:06:42.046 [Thd =41]  Info MMSFocus _isStop = true 
2025-08-03 10:06:53.201 [Thd =41]  Info Default DemarcateInspectZ:2.7
2025-08-03 10:06:53.981 [Thd =41]  Info MMSFocus _isStop = true 
2025-08-03 10:07:04.010 [Thd =41]  Info Default DemarcateInspectZ:0.1
2025-08-03 10:07:04.790 [Thd =41]  Info MMSFocus _isStop = true 
2025-08-03 10:07:15.945 [Thd =41]  Info Default DemarcateInspectZ:0.8
2025-08-03 10:07:15.958 [Thd =41]  Info Default MarkHeightDifference:2.7
2025-08-03 10:07:15.958 [Thd =56]  Info Default Difference of the Inspection Area2.70μm
2025-08-03 10:07:33.653 [Thd =1]  Info Default Successful alignment！
2025-08-03 10:07:33.653 [Thd =51]  Info Default 对准完成！
2025-08-03 10:07:33.654 [Thd =50]  Info Default 稍等！设置相机参数中
2025-08-03 10:07:33.654 [Thd =47]  Info Default 注册相机取图
2025-08-03 10:07:33.654 [Thd =44]  Info Default 移动到起始点位
2025-08-03 10:07:34.733 [Thd =55]  Info MMSFocus _isStop = true 
2025-08-03 10:07:34.940 [Thd =55]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435109845370622,StepStep:0.431712033071939,CosValueY:1,SinValueY:0
2025-08-03 10:07:34.941 [Thd =34]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:07:34.941 [Thd =55]  Info Default SetMaxPower:300
2025-08-03 10:07:35.942 [Thd =34]  Info Default 打开光源，亮度：46%
2025-08-03 10:07:35.942 [Thd =47]  Info Default OpenLamp Transmission
2025-08-03 10:07:35.975 [Thd =50]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:07:36.746 [Thd =46]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:07:37.476 [Thd =50]  Error Default SyncSend recv cmd timeout
2025-08-03 10:07:37.944 [Thd =23]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:07:37.944 [Thd =65]  Info Default 聚焦Track已关闭
2025-08-03 10:07:39.245 [Thd =23]  Info MMSFocus _isStop = true 
2025-08-03 10:07:39.556 [Thd =47]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:07:39.556 [Thd =47]  Info Default OpenLamp Reflection
2025-08-03 10:07:40.749 [Thd =23]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:07:40.749 [Thd =46]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:07:41.363 [Thd =47]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:07:42.751 [Thd =23]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:07:42.751 [Thd =64]  Info Default 聚焦Track已开启
2025-08-03 10:07:47.953 [Thd =56]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:07:47.953 [Thd =56]  Info Default ChangeLightPath: False!
2025-08-03 10:07:47.955 [Thd =23]  Info Default 执行MarkOffSet......
2025-08-03 10:07:47.955 [Thd =56]  Info Default CurrentSize:2048,2048
2025-08-03 10:07:47.955 [Thd =56]  Info Default Camera size no change
2025-08-03 10:07:47.956 [Thd =56]  Info Default Set camera size success
2025-08-03 10:07:47.956 [Thd =56]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:07:48.932 [Thd =56]  Info Default Set camera parameter
2025-08-03 10:07:48.933 [Thd =56]  Info Default TriggerMode is On,dont set
2025-08-03 10:07:48.933 [Thd =56]  Info Default BUFFER_COUNT no change
2025-08-03 10:07:48.938 [Thd =55]  Info strip vectorBegin:(59.45806,72.55975),VectorEnd:(64.763389,72.55975),CaptureBegin:(61.45806,72.55975)，CaptureEnd：(62.763389,72.55975),StepScan:0.435109845370622
2025-08-03 10:07:51.204 [Thd =55]  Info Default m_focusMapMode：0
2025-08-03 10:07:51.205 [Thd =55]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:-61.4580599393659,EndPoint:-62.7633894754778
2025-08-03 10:07:51.401 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:Initial 
2025-08-03 10:07:51.414 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:Initial 
2025-08-03 10:07:51.758 [Thd =31]  Info Default stormCore.MatchTemplate:0.853141
2025-08-03 10:07:51.758 [Thd =23]  Warn Default Mark offset match score:0.85314
2025-08-03 10:07:51.957 [Thd =55]  Info MMSFocus _isStop = true 
2025-08-03 10:07:52.482 [Thd =34]  Warn Default 还原光源最大功率
2025-08-03 10:07:52.482 [Thd =55]  Info Default LaserLamp MaxPower:300
2025-08-03 10:07:53.483 [Thd =41]  Info Default OpenLamp Transmission
2025-08-03 10:07:53.483 [Thd =44]  Info MMSFocus _isStop = true 
2025-08-03 10:07:54.286 [Thd =47]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:07:55.290 [Thd =41]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:07:55.290 [Thd =41]  Info Default CloseLamp Reflection
2025-08-03 10:07:55.988 [Thd =44]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:07:55.988 [Thd =47]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:07:56.315 [Thd =64]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:07:57.815 [Thd =64]  Error Default SyncSend recv cmd timeout
2025-08-03 10:07:57.990 [Thd =44]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:07:57.990 [Thd =56]  Info Default 聚焦Track已关闭
2025-08-03 10:08:05.494 [Thd =50]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:08:06.236 [Thd =1]  Info Default Move to the inspect start point，Starting point coordinates：X:69.6501903557258,Y:57.7976441992513,OffSet.X:3,OffSet.Y:3
2025-08-03 10:08:06.236 [Thd =50]  Warn Default 标记偏移点X:3，Y:3
2025-08-03 10:08:08.358 [Thd =44]  Info Default Zposition:0
2025-08-03 10:08:09.099 [Thd =51]  Info Default Wait! Setting camera parameters 
2025-08-03 10:08:09.101 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 10:08:09.103 [Thd =1]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:08:09.104 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 10:08:09.104 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 10:08:09.104 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() Running ! 
2025-08-03 10:08:09.104 [Thd =1]  Info Default AutoWorderHelper:StartWorker.
2025-08-03 10:08:09.106 [Thd =1]  Info Default AutoWorderHelper:SaveTask2DB.
2025-08-03 10:08:09.386 [Thd =1]  Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 2954
2025-08-03 10:08:09.386 [Thd =1]  Info Default AutoWorderHelper:InitInspectingData.
2025-08-03 10:08:09.386 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0
2025-08-03 10:08:09.387 [Thd =46]  Info Default 检测线程启动！
2025-08-03 10:08:09.387 [Thd =70]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 10:08:09.387 [Thd =34]  Info Default 结果处理线程启动！
2025-08-03 10:08:09.389 [Thd =70]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:08:09.390 [Thd =70]  Info Default SetSystemStatus Success
2025-08-03 10:08:09.390 [Thd =70]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 10:08:09.393 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2954
2025-08-03 10:08:09.393 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2954
2025-08-03 10:08:09.615 [Thd =70]  Info MMSFocus _isStop = true 
2025-08-03 10:08:09.616 [Thd =70]  Info Default aSwitchIndex index:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default lens from ATF:
2025-08-03 10:08:09.616 [Thd =70]  Info Default objCount:3
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:P200;objId:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:P140;objId:1
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:P100;objId:2
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:;objId:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:;objId:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:;objId:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:;objId:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:;objId:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default lens from system settings:
2025-08-03 10:08:09.616 [Thd =70]  Info Default systemlensettings lens count:3
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:P200;objId:0
2025-08-03 10:08:09.616 [Thd =70]  Info Default ratio:P140;objId:1
2025-08-03 10:08:09.617 [Thd =70]  Info Default ratio:P100;objId:2
2025-08-03 10:08:09.619 [Thd =70]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:08:09.651 [Thd =70]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:08:09.652 [Thd =70]  Info Default defectData.RecivePicCount:0
2025-08-03 10:08:09.652 [Thd =70]  Info Default start inspect task pic_count of one strip:321, big_strip_count:261. 
2025-08-03 10:08:09.653 [Thd =70]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:08:09.653 [Thd =70]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:08:09.653 [Thd =70]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:08:09.653 [Thd =70]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:08:09.653 [Thd =70]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:08:09.653 [Thd =70]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:08:09.653 [Thd =70]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:08:09.653 [Thd =70]  Info Default scaleX: 0.999996661960223, scaleY:1.00000009797383
2025-08-03 10:08:09.653 [Thd =70]  Info Default Orth_Y_BeforR: 0.148852256912439,StageScaleX:0.999996661960223,Y:1.00000009797383
2025-08-03 10:08:09.653 [Thd =70]  Info Default LengthOfAccelerationAndDeceleration: 2
2025-08-03 10:08:11.655 [Thd =70]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:08:11.655 [Thd =34]  Info Default 聚焦Track已关闭
2025-08-03 10:08:11.655 [Thd =46]  Info Default 正在切换线阵相机光路
2025-08-03 10:08:23.665 [Thd =70]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:08:23.665 [Thd =70]  Info Default ChangeLightPath: False!
2025-08-03 10:08:23.665 [Thd =70]  Info Default SnakeScanLine: Paddle Rotate angle is 0 !
2025-08-03 10:08:25.773 [Thd =70]  Info Default InspectOverlayX: 16, InspectOverlayY:16
2025-08-03 10:08:25.788 [Thd =44]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:08:25.788 [Thd =70]  Info Default SetMaxPower:300
2025-08-03 10:08:26.789 [Thd =23]  Info Default 正在打开透射、反射光源，亮度 46%
2025-08-03 10:08:26.789 [Thd =70]  Info Default OpenLamp Transmission
2025-08-03 10:08:27.592 [Thd =46]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:08:30.403 [Thd =70]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:08:30.403 [Thd =70]  Info Default OpenLamp Reflection
2025-08-03 10:08:31.437 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:08:32.209 [Thd =70]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:08:32.209 [Thd =46]  Info Default 正在启用实时聚焦
2025-08-03 10:08:32.633 [Thd =70]  Info MMSFocus _isStop = true 
2025-08-03 10:08:32.938 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:08:35.138 [Thd =70]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:08:35.138 [Thd =46]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:08:36.141 [Thd =64]  Info Default 正在设置扫描控制参数
2025-08-03 10:08:36.141 [Thd =70]  Info Default GetParameter: stepCompX is 0.000212455979184874
2025-08-03 10:08:36.944 [Thd =70]  Info Default Allocate resources!
2025-08-03 10:08:36.944 [Thd =70]  Info Default GPU num is 2!
2025-08-03 10:08:38.948 [Thd =70]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:08:38.948 [Thd =46]  Info Default 聚焦Track已开启
2025-08-03 10:08:38.948 [Thd =70]  Info Default Start scanning; Start strip number: 0, total strip number: 261
2025-08-03 10:08:38.949 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 0
2025-08-03 10:08:38.949 [Thd =23]  Info Default  开始扫描条带； [0/261]
2025-08-03 10:08:38.960 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:08:38.966 [Thd =70]  Info Default CaptureBeginX: 70.08553, CaptureBeginY:57.42588, CaptureEndX:-70.06335, CaptureEndY:57.42588, VectorBeginX:71.65042, VectorBeginY:57.42588, VectorEndX:-72.01984, VectorEndY:57.42588, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:08:38.966 [Thd =70]  Info Default ***row:0, vectorBeginX:71.650, vectorBeginY:57.426, captureBeginX:70.086, captureBeginY:57.426, captureEndX:-70.063, captureEndY:57.426, vectorEndX:-72.020, vectorEndY:57.426
2025-08-03 10:08:38.966 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:08:38.968 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0855310474112,EndPoint:70.0633501464661
2025-08-03 10:08:43.813 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:0
2025-08-03 10:08:43.814 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:08:43.814 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:08:43.816 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:0
2025-08-03 10:08:43.816 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:08:43.816 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:A_SourceLightType
2025-08-03 10:08:43.816 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:B_SourceLightType
2025-08-03 10:08:43.817 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,A_SourceLightType
2025-08-03 10:08:43.817 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,B_SourceLightType
2025-08-03 10:08:43.989 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;0/261,
2025-08-03 10:08:43.999 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:08:44.134 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:08:44.297 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:08:44.322 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_0_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:08:44.480 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 1
2025-08-03 10:08:44.480 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 1
2025-08-03 10:08:44.481 [Thd =64]  Info Default  开始扫描条带； [1/261]
2025-08-03 10:08:44.490 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:08:44.492 [Thd =70]  Info Default ***row:1, vectorBeginX:-72.020, vectorBeginY:56.998, captureBeginX:-70.401, captureBeginY:56.998, captureEndX:69.748, captureEndY:56.998, vectorEndX:71.650, vectorEndY:56.998
2025-08-03 10:08:44.492 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:08:44.494 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.40075418163,EndPoint:-69.7481270122472
2025-08-03 10:08:44.779 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:08:44.782 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_0_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:08:49.342 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:1
2025-08-03 10:08:49.342 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:08:49.342 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:08:49.344 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:1
2025-08-03 10:08:49.344 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:08:49.344 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:A_SourceLightType
2025-08-03 10:08:49.344 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:B_SourceLightType
2025-08-03 10:08:49.344 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,A_SourceLightType
2025-08-03 10:08:49.344 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,B_SourceLightType
2025-08-03 10:08:49.513 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;1/261,
2025-08-03 10:08:49.522 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:08:49.575 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:08:49.789 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:08:49.805 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_1_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:08:49.914 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 2
2025-08-03 10:08:49.914 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 2
2025-08-03 10:08:49.914 [Thd =64]  Info Default  开始扫描条带； [2/261]
2025-08-03 10:08:49.931 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:08:49.934 [Thd =70]  Info Default CaptureBeginX: 70.08557, CaptureBeginY:56.56926, CaptureEndX:-70.06331, CaptureEndY:56.56926, VectorBeginX:71.65046, VectorBeginY:56.56926, VectorEndX:-72.01980, VectorEndY:56.56926, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:08:49.934 [Thd =70]  Info Default ***row:2, vectorBeginX:71.650, vectorBeginY:56.569, captureBeginX:70.086, captureBeginY:56.569, captureEndX:-70.063, captureEndY:56.569, vectorEndX:-72.020, vectorEndY:56.569
2025-08-03 10:08:49.934 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:08:49.936 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0855681387504,EndPoint:70.0633130551268
2025-08-03 10:08:50.268 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:08:50.271 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_1_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:08:54.781 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:2
2025-08-03 10:08:54.782 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:08:54.782 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:08:54.783 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:2
2025-08-03 10:08:54.783 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:08:54.783 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:A_SourceLightType
2025-08-03 10:08:54.784 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:B_SourceLightType
2025-08-03 10:08:54.784 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,A_SourceLightType
2025-08-03 10:08:54.784 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,B_SourceLightType
2025-08-03 10:08:54.963 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;2/261,
2025-08-03 10:08:54.974 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:08:55.026 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:08:55.234 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:08:55.249 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_2_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:08:55.369 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 3
2025-08-03 10:08:55.369 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 3
2025-08-03 10:08:55.369 [Thd =23]  Info Default  开始扫描条带； [3/261]
2025-08-03 10:08:55.378 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:08:55.381 [Thd =70]  Info Default ***row:3, vectorBeginX:-72.020, vectorBeginY:56.141, captureBeginX:-70.401, captureBeginY:56.141, captureEndX:69.748, captureEndY:56.141, vectorEndX:71.650, vectorEndY:56.141
2025-08-03 10:08:55.381 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:08:55.383 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4007170902907,EndPoint:-69.7481641035865
2025-08-03 10:08:55.708 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:08:55.711 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_2_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:00.230 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:3
2025-08-03 10:09:00.230 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:00.230 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:00.232 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:3
2025-08-03 10:09:00.232 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:00.232 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:A_SourceLightType
2025-08-03 10:09:00.232 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:B_SourceLightType
2025-08-03 10:09:00.232 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,A_SourceLightType
2025-08-03 10:09:00.233 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,B_SourceLightType
2025-08-03 10:09:00.402 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;3/261,
2025-08-03 10:09:00.412 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:00.471 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:00.684 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:00.702 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_3_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:00.806 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 4
2025-08-03 10:09:00.806 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 4
2025-08-03 10:09:00.806 [Thd =64]  Info Default  开始扫描条带； [4/261]
2025-08-03 10:09:00.815 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:09:00.818 [Thd =70]  Info Default CaptureBeginX: 70.08561, CaptureBeginY:55.71263, CaptureEndX:-70.06328, CaptureEndY:55.71263, VectorBeginX:71.65050, VectorBeginY:55.71263, VectorEndX:-72.01976, VectorEndY:55.71263, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:09:00.818 [Thd =70]  Info Default ***row:4, vectorBeginX:71.650, vectorBeginY:55.713, captureBeginX:70.086, captureBeginY:55.713, captureEndX:-70.063, captureEndY:55.713, vectorEndX:-72.020, vectorEndY:55.713
2025-08-03 10:09:00.818 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:00.820 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0856052300897,EndPoint:70.0632759637875
2025-08-03 10:09:01.172 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:01.174 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_3_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:03.476 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:03
2025-08-03 10:09:03.489 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:03
2025-08-03 10:09:05.665 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:4
2025-08-03 10:09:05.666 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:05.666 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:05.668 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:4
2025-08-03 10:09:05.668 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:05.668 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:A_SourceLightType
2025-08-03 10:09:05.668 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:B_SourceLightType
2025-08-03 10:09:05.669 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,A_SourceLightType
2025-08-03 10:09:05.669 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,B_SourceLightType
2025-08-03 10:09:05.840 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;4/261,
2025-08-03 10:09:05.850 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:05.902 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:06.119 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:06.122 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_4_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:06.246 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 5
2025-08-03 10:09:06.246 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 5
2025-08-03 10:09:06.246 [Thd =67]  Info Default  开始扫描条带； [5/261]
2025-08-03 10:09:06.255 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:09:06.260 [Thd =70]  Info Default ***row:5, vectorBeginX:-72.020, vectorBeginY:55.284, captureBeginX:-70.401, captureBeginY:55.284, captureEndX:69.748, captureEndY:55.284, vectorEndX:71.651, vectorEndY:55.284
2025-08-03 10:09:06.260 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:06.262 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4006799989514,EndPoint:-69.7482011949258
2025-08-03 10:09:06.585 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:06.588 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_4_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:10.009 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:10
2025-08-03 10:09:10.030 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:10
2025-08-03 10:09:11.112 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:5
2025-08-03 10:09:11.113 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:11.113 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:11.115 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:5
2025-08-03 10:09:11.115 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:11.115 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:A_SourceLightType
2025-08-03 10:09:11.115 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:B_SourceLightType
2025-08-03 10:09:11.115 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,A_SourceLightType
2025-08-03 10:09:11.115 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,B_SourceLightType
2025-08-03 10:09:11.290 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;5/261,
2025-08-03 10:09:11.299 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:11.363 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:11.586 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:11.592 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_5_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:11.699 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 6
2025-08-03 10:09:11.699 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 6
2025-08-03 10:09:11.699 [Thd =46]  Info Default  开始扫描条带； [6/261]
2025-08-03 10:09:11.713 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:09:11.716 [Thd =70]  Info Default CaptureBeginX: 70.08564, CaptureBeginY:54.85601, CaptureEndX:-70.06324, CaptureEndY:54.85601, VectorBeginX:71.65053, VectorBeginY:54.85601, VectorEndX:-72.01973, VectorEndY:54.85601, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:09:11.716 [Thd =70]  Info Default ***row:6, vectorBeginX:71.651, vectorBeginY:54.856, captureBeginX:70.086, captureBeginY:54.856, captureEndX:-70.063, captureEndY:54.856, vectorEndX:-72.020, vectorEndY:54.856
2025-08-03 10:09:11.716 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:11.718 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.085642321429,EndPoint:70.0632388724482
2025-08-03 10:09:12.062 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:12.065 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_5_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:14.545 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:14
2025-08-03 10:09:14.556 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:14
2025-08-03 10:09:16.563 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:6
2025-08-03 10:09:16.563 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:16.563 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:16.565 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:6
2025-08-03 10:09:16.565 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:16.565 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:A_SourceLightType
2025-08-03 10:09:16.565 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:B_SourceLightType
2025-08-03 10:09:16.566 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,A_SourceLightType
2025-08-03 10:09:16.566 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,B_SourceLightType
2025-08-03 10:09:16.743 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;6/261,
2025-08-03 10:09:16.752 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:16.798 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:17.019 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:17.021 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_6_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:17.133 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 7
2025-08-03 10:09:17.133 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 7
2025-08-03 10:09:17.133 [Thd =44]  Info Default  开始扫描条带； [7/261]
2025-08-03 10:09:17.148 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:09:17.151 [Thd =70]  Info Default ***row:7, vectorBeginX:-72.020, vectorBeginY:54.428, captureBeginX:-70.401, captureBeginY:54.428, captureEndX:69.748, captureEndY:54.428, vectorEndX:71.651, vectorEndY:54.428
2025-08-03 10:09:17.151 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:17.153 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4006429076121,EndPoint:-69.7482382862651
2025-08-03 10:09:17.489 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:17.491 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_6_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:20.576 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:20
2025-08-03 10:09:20.599 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:20
2025-08-03 10:09:21.602 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:21
2025-08-03 10:09:21.623 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:21
2025-08-03 10:09:22.003 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:7
2025-08-03 10:09:22.003 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:22.003 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:22.005 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:7
2025-08-03 10:09:22.005 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:22.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:A_SourceLightType
2025-08-03 10:09:22.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:B_SourceLightType
2025-08-03 10:09:22.005 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,A_SourceLightType
2025-08-03 10:09:22.005 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,B_SourceLightType
2025-08-03 10:09:22.183 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;7/261,
2025-08-03 10:09:22.192 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:22.350 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:22.458 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:22.460 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_7_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:22.685 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 8
2025-08-03 10:09:22.685 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 8
2025-08-03 10:09:22.685 [Thd =23]  Info Default  开始扫描条带； [8/261]
2025-08-03 10:09:22.693 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:09:22.696 [Thd =70]  Info Default CaptureBeginX: 70.08568, CaptureBeginY:53.99938, CaptureEndX:-70.06320, CaptureEndY:53.99938, VectorBeginX:71.65057, VectorBeginY:53.99938, VectorEndX:-72.01969, VectorEndY:53.99938, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:09:22.696 [Thd =70]  Info Default ***row:8, vectorBeginX:71.651, vectorBeginY:53.999, captureBeginX:70.086, captureBeginY:53.999, captureEndX:-70.063, captureEndY:53.999, vectorEndX:-72.020, vectorEndY:53.999
2025-08-03 10:09:22.697 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:22.699 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0856794127683,EndPoint:70.0632017811089
2025-08-03 10:09:22.921 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:22.924 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_7_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:27.543 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:8
2025-08-03 10:09:27.543 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:27.543 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:27.545 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:8
2025-08-03 10:09:27.545 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:27.546 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:A_SourceLightType
2025-08-03 10:09:27.546 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:B_SourceLightType
2025-08-03 10:09:27.546 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,A_SourceLightType
2025-08-03 10:09:27.546 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,B_SourceLightType
2025-08-03 10:09:27.725 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;8/261,
2025-08-03 10:09:27.734 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:27.787 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:27.996 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:27.999 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_8_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:28.131 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 9
2025-08-03 10:09:28.131 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 9
2025-08-03 10:09:28.131 [Thd =67]  Info Default  开始扫描条带； [9/261]
2025-08-03 10:09:28.147 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:09:28.150 [Thd =70]  Info Default ***row:9, vectorBeginX:-72.020, vectorBeginY:53.571, captureBeginX:-70.401, captureBeginY:53.571, captureEndX:69.748, captureEndY:53.571, vectorEndX:71.651, vectorEndY:53.571
2025-08-03 10:09:28.150 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:28.151 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4006058162728,EndPoint:-69.7482753776044
2025-08-03 10:09:28.464 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:28.466 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_8_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:29.151 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:29
2025-08-03 10:09:29.163 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:29
2025-08-03 10:09:33.000 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:9
2025-08-03 10:09:33.000 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:33.000 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:33.012 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:9
2025-08-03 10:09:33.012 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:33.012 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:B_SourceLightType
2025-08-03 10:09:33.012 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:A_SourceLightType
2025-08-03 10:09:33.012 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,B_SourceLightType
2025-08-03 10:09:33.013 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,A_SourceLightType
2025-08-03 10:09:33.170 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;9/261,
2025-08-03 10:09:33.176 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:33
2025-08-03 10:09:33.179 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:33.200 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:33
2025-08-03 10:09:33.238 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:33.499 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:33.501 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_9_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:33.573 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 10
2025-08-03 10:09:33.573 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 10
2025-08-03 10:09:33.573 [Thd =67]  Info Default  开始扫描条带； [10/261]
2025-08-03 10:09:33.581 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:09:33.584 [Thd =70]  Info Default CaptureBeginX: 70.08572, CaptureBeginY:53.14276, CaptureEndX:-70.06316, CaptureEndY:53.14276, VectorBeginX:71.65061, VectorBeginY:53.14276, VectorEndX:-72.01965, VectorEndY:53.14276, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:09:33.584 [Thd =70]  Info Default ***row:10, vectorBeginX:71.651, vectorBeginY:53.143, captureBeginX:70.086, captureBeginY:53.143, captureEndX:-70.063, captureEndY:53.143, vectorEndX:-72.020, vectorEndY:53.143
2025-08-03 10:09:33.585 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:33.586 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0857165041076,EndPoint:70.0631646897696
2025-08-03 10:09:33.968 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:33.971 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_9_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:38.216 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:38
2025-08-03 10:09:38.238 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:38
2025-08-03 10:09:38.431 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:10
2025-08-03 10:09:38.431 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:38.431 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:38.433 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:10
2025-08-03 10:09:38.434 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:38.434 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:A_SourceLightType
2025-08-03 10:09:38.434 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:B_SourceLightType
2025-08-03 10:09:38.434 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,A_SourceLightType
2025-08-03 10:09:38.434 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,B_SourceLightType
2025-08-03 10:09:38.614 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;10/261,
2025-08-03 10:09:38.624 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:38.659 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:38.891 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:38.893 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_10_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:38.995 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 11
2025-08-03 10:09:38.995 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 11
2025-08-03 10:09:38.995 [Thd =46]  Info Default  开始扫描条带； [11/261]
2025-08-03 10:09:39.011 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:09:39.014 [Thd =70]  Info Default ***row:11, vectorBeginX:-72.020, vectorBeginY:52.714, captureBeginX:-70.401, captureBeginY:52.714, captureEndX:69.748, captureEndY:52.714, vectorEndX:71.651, vectorEndY:52.714
2025-08-03 10:09:39.014 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:39.016 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4005687249335,EndPoint:-69.7483124689437
2025-08-03 10:09:39.365 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:39.368 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_10_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:43.862 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:11
2025-08-03 10:09:43.863 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:43.863 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:43.865 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:11
2025-08-03 10:09:43.866 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:43
2025-08-03 10:09:43.866 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:43.866 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:A_SourceLightType
2025-08-03 10:09:43.866 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,A_SourceLightType
2025-08-03 10:09:43.866 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,B_SourceLightType
2025-08-03 10:09:43.866 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:B_SourceLightType
2025-08-03 10:09:43.892 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:43
2025-08-03 10:09:44.037 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;11/261,
2025-08-03 10:09:44.048 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:44.092 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:44.320 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:44.323 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_11_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:44.437 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 12
2025-08-03 10:09:44.437 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 12
2025-08-03 10:09:44.437 [Thd =23]  Info Default  开始扫描条带； [12/261]
2025-08-03 10:09:44.446 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:09:44.449 [Thd =70]  Info Default CaptureBeginX: 70.08575, CaptureBeginY:52.28613, CaptureEndX:-70.06313, CaptureEndY:52.28613, VectorBeginX:71.65064, VectorBeginY:52.28613, VectorEndX:-72.01962, VectorEndY:52.28613, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:09:44.449 [Thd =70]  Info Default ***row:12, vectorBeginX:71.651, vectorBeginY:52.286, captureBeginX:70.086, captureBeginY:52.286, captureEndX:-70.063, captureEndY:52.286, vectorEndX:-72.020, vectorEndY:52.286
2025-08-03 10:09:44.449 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:44.451 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0857535954469,EndPoint:70.0631275984303
2025-08-03 10:09:44.790 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:44.792 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_11_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:49.296 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:12
2025-08-03 10:09:49.296 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:49.296 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:49.298 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:12
2025-08-03 10:09:49.298 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:49.298 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:A_SourceLightType
2025-08-03 10:09:49.298 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:B_SourceLightType
2025-08-03 10:09:49.298 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,A_SourceLightType
2025-08-03 10:09:49.298 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,B_SourceLightType
2025-08-03 10:09:49.466 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;12/261,
2025-08-03 10:09:49.475 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:49.529 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:49.752 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:49.754 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_12_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:49.865 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 13
2025-08-03 10:09:49.865 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 13
2025-08-03 10:09:49.865 [Thd =41]  Info Default  开始扫描条带； [13/261]
2025-08-03 10:09:49.882 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:09:49.885 [Thd =70]  Info Default ***row:13, vectorBeginX:-72.020, vectorBeginY:51.858, captureBeginX:-70.401, captureBeginY:51.858, captureEndX:69.748, captureEndY:51.858, vectorEndX:71.651, vectorEndY:51.858
2025-08-03 10:09:49.885 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:49.887 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4005316335942,EndPoint:-69.748349560283
2025-08-03 10:09:50.222 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:50.225 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_12_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:50.572 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:50
2025-08-03 10:09:50.591 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:50
2025-08-03 10:09:54.740 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:13
2025-08-03 10:09:54.740 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:54.740 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:09:54.903 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:13
2025-08-03 10:09:54.903 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:09:54.903 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:B_SourceLightType
2025-08-03 10:09:54.903 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,B_SourceLightType
2025-08-03 10:09:54.904 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:A_SourceLightType
2025-08-03 10:09:54.904 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,A_SourceLightType
2025-08-03 10:09:54.916 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;13/261,
2025-08-03 10:09:54.926 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:09:54.983 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:09:55.328 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 14
2025-08-03 10:09:55.328 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 14
2025-08-03 10:09:55.328 [Thd =48]  Info Default  开始扫描条带； [14/261]
2025-08-03 10:09:55.341 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:09:55.343 [Thd =70]  Info Default CaptureBeginX: 70.08579, CaptureBeginY:51.42951, CaptureEndX:-70.06309, CaptureEndY:51.42951, VectorBeginX:71.65068, VectorBeginY:51.42951, VectorEndX:-72.01958, VectorEndY:51.42951, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:09:55.343 [Thd =70]  Info Default ***row:14, vectorBeginX:71.651, vectorBeginY:51.430, captureBeginX:70.086, captureBeginY:51.430, captureEndX:-70.063, captureEndY:51.430, vectorEndX:-72.020, vectorEndY:51.430
2025-08-03 10:09:55.343 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:09:55.345 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0857906867862,EndPoint:70.063090507091
2025-08-03 10:09:55.358 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:09:55.361 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_13_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:09:55.607 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:09:55
2025-08-03 10:09:55.618 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:09:55
2025-08-03 10:09:55.839 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:09:55.842 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_13_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:00.130 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:00
2025-08-03 10:10:00.155 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:00
2025-08-03 10:10:00.189 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:14
2025-08-03 10:10:00.194 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:00.194 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:00.196 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:14
2025-08-03 10:10:00.197 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:00.197 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:A_SourceLightType
2025-08-03 10:10:00.197 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:B_SourceLightType
2025-08-03 10:10:00.197 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,A_SourceLightType
2025-08-03 10:10:00.197 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,B_SourceLightType
2025-08-03 10:10:00.364 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;14/261,
2025-08-03 10:10:00.373 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:00.476 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:00.680 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:00.683 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_14_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:00.811 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 15
2025-08-03 10:10:00.811 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 15
2025-08-03 10:10:00.811 [Thd =56]  Info Default  开始扫描条带； [15/261]
2025-08-03 10:10:00.822 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:10:00.826 [Thd =70]  Info Default ***row:15, vectorBeginX:-72.020, vectorBeginY:51.001, captureBeginX:-70.400, captureBeginY:51.001, captureEndX:69.748, captureEndY:51.001, vectorEndX:71.651, vectorEndY:51.001
2025-08-03 10:10:00.826 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:00.828 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4004945422549,EndPoint:-69.7483866516223
2025-08-03 10:10:01.162 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:01.164 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_14_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:05.680 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:15
2025-08-03 10:10:05.680 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:05.680 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:05.681 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:15
2025-08-03 10:10:05.681 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:05.681 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:A_SourceLightType
2025-08-03 10:10:05.681 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:B_SourceLightType
2025-08-03 10:10:05.682 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,A_SourceLightType
2025-08-03 10:10:05.682 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,B_SourceLightType
2025-08-03 10:10:05.858 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;15/261,
2025-08-03 10:10:05.867 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:05.918 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:06.136 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:06.139 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_15_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:06.261 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 16
2025-08-03 10:10:06.261 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 16
2025-08-03 10:10:06.261 [Thd =64]  Info Default  开始扫描条带； [16/261]
2025-08-03 10:10:06.270 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:10:06.273 [Thd =70]  Info Default CaptureBeginX: 70.08583, CaptureBeginY:50.57288, CaptureEndX:-70.06305, CaptureEndY:50.57288, VectorBeginX:71.65072, VectorBeginY:50.57288, VectorEndX:-72.01954, VectorEndY:50.57288, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:10:06.273 [Thd =70]  Info Default ***row:16, vectorBeginX:71.651, vectorBeginY:50.573, captureBeginX:70.086, captureBeginY:50.573, captureEndX:-70.063, captureEndY:50.573, vectorEndX:-72.020, vectorEndY:50.573
2025-08-03 10:10:06.273 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:06.275 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0858277781255,EndPoint:70.0630534157517
2025-08-03 10:10:06.606 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:06.608 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_15_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:07.172 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:07
2025-08-03 10:10:07.184 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:07
2025-08-03 10:10:11.120 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:16
2025-08-03 10:10:11.121 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:11.121 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:11.123 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:16
2025-08-03 10:10:11.123 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:11.123 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:A_SourceLightType
2025-08-03 10:10:11.123 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:B_SourceLightType
2025-08-03 10:10:11.123 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,A_SourceLightType
2025-08-03 10:10:11.123 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,B_SourceLightType
2025-08-03 10:10:11.295 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;16/261,
2025-08-03 10:10:11.305 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:11.344 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:11.579 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:11.581 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_16_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:11.679 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 17
2025-08-03 10:10:11.679 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 17
2025-08-03 10:10:11.679 [Thd =50]  Info Default  开始扫描条带； [17/261]
2025-08-03 10:10:11.688 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:10:11.691 [Thd =70]  Info Default ***row:17, vectorBeginX:-72.020, vectorBeginY:50.145, captureBeginX:-70.400, captureBeginY:50.145, captureEndX:69.748, captureEndY:50.145, vectorEndX:71.651, vectorEndY:50.145
2025-08-03 10:10:11.691 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:11.692 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4004574509156,EndPoint:-69.7484237429616
2025-08-03 10:10:12.050 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:12.053 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_16_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:14.206 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:14
2025-08-03 10:10:14.218 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:14
2025-08-03 10:10:16.542 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:17
2025-08-03 10:10:16.543 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:16.543 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:16.545 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:17
2025-08-03 10:10:16.545 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:16.545 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:A_SourceLightType
2025-08-03 10:10:16.545 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:B_SourceLightType
2025-08-03 10:10:16.545 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,A_SourceLightType
2025-08-03 10:10:16.545 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,B_SourceLightType
2025-08-03 10:10:16.714 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;17/261,
2025-08-03 10:10:16.723 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:16.772 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:16.999 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:17.001 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_17_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:17.119 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 18
2025-08-03 10:10:17.119 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 18
2025-08-03 10:10:17.119 [Thd =50]  Info Default  开始扫描条带； [18/261]
2025-08-03 10:10:17.128 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:10:17.131 [Thd =70]  Info Default CaptureBeginX: 70.08586, CaptureBeginY:49.71625, CaptureEndX:-70.06302, CaptureEndY:49.71625, VectorBeginX:71.65076, VectorBeginY:49.71625, VectorEndX:-72.01951, VectorEndY:49.71625, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:10:17.131 [Thd =70]  Info Default ***row:18, vectorBeginX:71.651, vectorBeginY:49.716, captureBeginX:70.086, captureBeginY:49.716, captureEndX:-70.063, captureEndY:49.716, vectorEndX:-72.020, vectorEndY:49.716
2025-08-03 10:10:17.131 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:17.132 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0858648694648,EndPoint:70.0630163244124
2025-08-03 10:10:17.466 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:17.470 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_17_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:18.732 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:18
2025-08-03 10:10:18.745 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:18
2025-08-03 10:10:21.977 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:18
2025-08-03 10:10:21.977 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:21.978 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:21.979 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:18
2025-08-03 10:10:21.979 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:21.980 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:A_SourceLightType
2025-08-03 10:10:21.980 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:B_SourceLightType
2025-08-03 10:10:21.980 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,A_SourceLightType
2025-08-03 10:10:21.980 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,B_SourceLightType
2025-08-03 10:10:22.159 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;18/261,
2025-08-03 10:10:22.168 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:22.223 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:22.439 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:22.442 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_18_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:22.557 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 19
2025-08-03 10:10:22.557 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 19
2025-08-03 10:10:22.557 [Thd =64]  Info Default  开始扫描条带； [19/261]
2025-08-03 10:10:22.566 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:10:22.569 [Thd =70]  Info Default ***row:19, vectorBeginX:-72.019, vectorBeginY:49.288, captureBeginX:-70.400, captureBeginY:49.288, captureEndX:69.748, captureEndY:49.288, vectorEndX:71.651, vectorEndY:49.288
2025-08-03 10:10:22.569 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:22.570 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4004203595763,EndPoint:-69.7484608343009
2025-08-03 10:10:22.909 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:22.913 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_18_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:25.266 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:25
2025-08-03 10:10:25.278 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:25
2025-08-03 10:10:27.417 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:19
2025-08-03 10:10:27.417 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:27.417 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:27.420 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:19
2025-08-03 10:10:27.420 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:27.420 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:A_SourceLightType
2025-08-03 10:10:27.420 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:B_SourceLightType
2025-08-03 10:10:27.420 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,A_SourceLightType
2025-08-03 10:10:27.420 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,B_SourceLightType
2025-08-03 10:10:27.594 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;19/261,
2025-08-03 10:10:27.604 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:27.658 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:27.878 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:27.881 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_19_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:28.002 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 20
2025-08-03 10:10:28.002 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 20
2025-08-03 10:10:28.002 [Thd =23]  Info Default  开始扫描条带； [20/261]
2025-08-03 10:10:28.014 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:10:28.016 [Thd =70]  Info Default CaptureBeginX: 70.08590, CaptureBeginY:48.85963, CaptureEndX:-70.06298, CaptureEndY:48.85963, VectorBeginX:71.65079, VectorBeginY:48.85963, VectorEndX:-72.01947, VectorEndY:48.85963, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:10:28.017 [Thd =70]  Info Default ***row:20, vectorBeginX:71.651, vectorBeginY:48.860, captureBeginX:70.086, captureBeginY:48.860, captureEndX:-70.063, captureEndY:48.860, vectorEndX:-72.019, vectorEndY:48.860
2025-08-03 10:10:28.017 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:28.018 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0859019608041,EndPoint:70.0629792330731
2025-08-03 10:10:28.287 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:28
2025-08-03 10:10:28.300 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:28
2025-08-03 10:10:28.351 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:28.356 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_19_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:32.862 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:20
2025-08-03 10:10:32.862 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:32.862 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:32.867 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:20
2025-08-03 10:10:32.867 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:32.868 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:A_SourceLightType
2025-08-03 10:10:32.868 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:B_SourceLightType
2025-08-03 10:10:32.868 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,A_SourceLightType
2025-08-03 10:10:32.868 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,B_SourceLightType
2025-08-03 10:10:33.041 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;20/261,
2025-08-03 10:10:33.050 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:33.096 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:33.345 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:33.348 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_20_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:33.440 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 21
2025-08-03 10:10:33.440 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 21
2025-08-03 10:10:33.440 [Thd =44]  Info Default  开始扫描条带； [21/261]
2025-08-03 10:10:33.449 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:10:33.452 [Thd =70]  Info Default ***row:21, vectorBeginX:-72.019, vectorBeginY:48.431, captureBeginX:-70.400, captureBeginY:48.431, captureEndX:69.748, captureEndY:48.431, vectorEndX:71.651, vectorEndY:48.431
2025-08-03 10:10:33.452 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:33.453 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4003832682371,EndPoint:-69.7484979256402
2025-08-03 10:10:33.813 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:33.815 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_20_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:34.823 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:34
2025-08-03 10:10:34.836 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:34
2025-08-03 10:10:38.300 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:21
2025-08-03 10:10:38.300 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:38.300 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:38.302 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:21
2025-08-03 10:10:38.302 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:38.302 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:A_SourceLightType
2025-08-03 10:10:38.302 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:B_SourceLightType
2025-08-03 10:10:38.302 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,A_SourceLightType
2025-08-03 10:10:38.302 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,B_SourceLightType
2025-08-03 10:10:38.469 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;21/261,
2025-08-03 10:10:38.478 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:38.568 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:38.757 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:38.766 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_21_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:38.902 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 22
2025-08-03 10:10:38.902 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 22
2025-08-03 10:10:38.902 [Thd =44]  Info Default  开始扫描条带； [22/261]
2025-08-03 10:10:38.913 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:10:38.916 [Thd =70]  Info Default CaptureBeginX: 70.08594, CaptureBeginY:48.00300, CaptureEndX:-70.06294, CaptureEndY:48.00300, VectorBeginX:71.65083, VectorBeginY:48.00300, VectorEndX:-72.01943, VectorEndY:48.00300, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:10:38.916 [Thd =70]  Info Default ***row:22, vectorBeginX:71.651, vectorBeginY:48.003, captureBeginX:70.086, captureBeginY:48.003, captureEndX:-70.063, captureEndY:48.003, vectorEndX:-72.019, vectorEndY:48.003
2025-08-03 10:10:38.916 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:38.918 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0859390521434,EndPoint:70.0629421417338
2025-08-03 10:10:39.231 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:39.234 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_21_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:39.352 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:39
2025-08-03 10:10:39.363 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:39
2025-08-03 10:10:43.763 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:22
2025-08-03 10:10:43.763 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:43.763 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:43.765 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:22
2025-08-03 10:10:43.765 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:43.765 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:A_SourceLightType
2025-08-03 10:10:43.765 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:B_SourceLightType
2025-08-03 10:10:43.765 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,A_SourceLightType
2025-08-03 10:10:43.765 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,B_SourceLightType
2025-08-03 10:10:43.939 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;22/261,
2025-08-03 10:10:43.949 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:43.995 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:44.221 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:44.223 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_22_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:44.330 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 23
2025-08-03 10:10:44.330 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 23
2025-08-03 10:10:44.330 [Thd =68]  Info Default  开始扫描条带； [23/261]
2025-08-03 10:10:44.339 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:10:44.342 [Thd =70]  Info Default ***row:23, vectorBeginX:-72.019, vectorBeginY:47.575, captureBeginX:-70.400, captureBeginY:47.575, captureEndX:69.749, captureEndY:47.575, vectorEndX:71.651, vectorEndY:47.575
2025-08-03 10:10:44.342 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:44.344 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4003461768978,EndPoint:-69.7485350169795
2025-08-03 10:10:44.692 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:44.694 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_22_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:45.885 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:45
2025-08-03 10:10:45.905 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:45
2025-08-03 10:10:49.190 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:23
2025-08-03 10:10:49.190 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:49.190 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:49.192 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:23
2025-08-03 10:10:49.192 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:49.192 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:A_SourceLightType
2025-08-03 10:10:49.192 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:B_SourceLightType
2025-08-03 10:10:49.192 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,A_SourceLightType
2025-08-03 10:10:49.192 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,B_SourceLightType
2025-08-03 10:10:49.366 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;23/261,
2025-08-03 10:10:49.375 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:49.422 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:49.651 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:49.654 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_23_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:49.759 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 24
2025-08-03 10:10:49.759 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 24
2025-08-03 10:10:49.759 [Thd =51]  Info Default  开始扫描条带； [24/261]
2025-08-03 10:10:49.768 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:10:49.771 [Thd =70]  Info Default CaptureBeginX: 70.08598, CaptureBeginY:47.14638, CaptureEndX:-70.06291, CaptureEndY:47.14638, VectorBeginX:71.65087, VectorBeginY:47.14638, VectorEndX:-72.01939, VectorEndY:47.14638, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:10:49.771 [Thd =70]  Info Default ***row:24, vectorBeginX:71.651, vectorBeginY:47.146, captureBeginX:70.086, captureBeginY:47.146, captureEndX:-70.063, captureEndY:47.146, vectorEndX:-72.019, vectorEndY:47.146
2025-08-03 10:10:49.771 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:49.773 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0859761434827,EndPoint:70.0629050503945
2025-08-03 10:10:49.918 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:49
2025-08-03 10:10:49.943 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:49
2025-08-03 10:10:50.128 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:50.131 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_23_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:54.620 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:24
2025-08-03 10:10:54.620 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:54.620 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:10:54.673 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:24
2025-08-03 10:10:54.673 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:10:54.674 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:B_SourceLightType
2025-08-03 10:10:54.674 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:A_SourceLightType
2025-08-03 10:10:54.674 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,B_SourceLightType
2025-08-03 10:10:54.674 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,A_SourceLightType
2025-08-03 10:10:54.798 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;24/261,
2025-08-03 10:10:54.808 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:10:54.853 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:10:55.157 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:10:55.159 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_24_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:55.199 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 25
2025-08-03 10:10:55.199 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 25
2025-08-03 10:10:55.199 [Thd =41]  Info Default  开始扫描条带； [25/261]
2025-08-03 10:10:55.208 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:10:55.211 [Thd =70]  Info Default ***row:25, vectorBeginX:-72.019, vectorBeginY:46.718, captureBeginX:-70.400, captureBeginY:46.718, captureEndX:69.749, captureEndY:46.718, vectorEndX:71.651, vectorEndY:46.718
2025-08-03 10:10:55.211 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:10:55.213 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4003090855585,EndPoint:-69.7485721083188
2025-08-03 10:10:55.633 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:10:55.635 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_24_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:10:56.965 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:10:56
2025-08-03 10:10:56.983 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:10:56
2025-08-03 10:11:00.060 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:25
2025-08-03 10:11:00.060 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:00.060 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:00.062 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:25
2025-08-03 10:11:00.062 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:00.063 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:A_SourceLightType
2025-08-03 10:11:00.063 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:B_SourceLightType
2025-08-03 10:11:00.063 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,A_SourceLightType
2025-08-03 10:11:00.063 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,B_SourceLightType
2025-08-03 10:11:00.239 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;25/261,
2025-08-03 10:11:00.248 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:00.301 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:00.521 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:00.523 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_25_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:00.647 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 26
2025-08-03 10:11:00.647 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 26
2025-08-03 10:11:00.647 [Thd =44]  Info Default  开始扫描条带； [26/261]
2025-08-03 10:11:00.656 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:11:00.659 [Thd =70]  Info Default CaptureBeginX: 70.08601, CaptureBeginY:46.28975, CaptureEndX:-70.06287, CaptureEndY:46.28975, VectorBeginX:71.65090, VectorBeginY:46.28975, VectorEndX:-72.01936, VectorEndY:46.28975, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:11:00.659 [Thd =70]  Info Default ***row:26, vectorBeginX:71.651, vectorBeginY:46.290, captureBeginX:70.086, captureBeginY:46.290, captureEndX:-70.063, captureEndY:46.290, vectorEndX:-72.019, vectorEndY:46.290
2025-08-03 10:11:00.659 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:00.661 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.086013234822,EndPoint:70.0628679590553
2025-08-03 10:11:00.989 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:00.992 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_25_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:01.497 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:01
2025-08-03 10:11:01.509 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:01
2025-08-03 10:11:05.510 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:26
2025-08-03 10:11:05.511 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:05.511 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:05.513 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:26
2025-08-03 10:11:05.513 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:05.513 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:A_SourceLightType
2025-08-03 10:11:05.513 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:B_SourceLightType
2025-08-03 10:11:05.513 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,A_SourceLightType
2025-08-03 10:11:05.513 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,B_SourceLightType
2025-08-03 10:11:05.692 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;26/261,
2025-08-03 10:11:05.701 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:05.752 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:05.971 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:05.974 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_26_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:06.088 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 27
2025-08-03 10:11:06.088 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 27
2025-08-03 10:11:06.088 [Thd =41]  Info Default  开始扫描条带； [27/261]
2025-08-03 10:11:06.100 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:11:06.103 [Thd =70]  Info Default ***row:27, vectorBeginX:-72.019, vectorBeginY:45.861, captureBeginX:-70.400, captureBeginY:45.861, captureEndX:69.749, captureEndY:45.861, vectorEndX:71.651, vectorEndY:45.861
2025-08-03 10:11:06.103 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:06.105 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4002719942192,EndPoint:-69.7486091996581
2025-08-03 10:11:06.446 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:06.449 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_26_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:08.029 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:08
2025-08-03 10:11:08.041 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:08
2025-08-03 10:11:10.958 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:27
2025-08-03 10:11:10.958 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:10.958 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:10.959 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:27
2025-08-03 10:11:10.959 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:10.959 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:A_SourceLightType
2025-08-03 10:11:10.960 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:B_SourceLightType
2025-08-03 10:11:10.960 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,A_SourceLightType
2025-08-03 10:11:10.960 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,B_SourceLightType
2025-08-03 10:11:11.133 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;27/261,
2025-08-03 10:11:11.142 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:11.202 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:11.417 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:11.420 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_27_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:11.548 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 28
2025-08-03 10:11:11.548 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 28
2025-08-03 10:11:11.548 [Thd =67]  Info Default  开始扫描条带； [28/261]
2025-08-03 10:11:11.557 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:11:11.560 [Thd =70]  Info Default CaptureBeginX: 70.08605, CaptureBeginY:45.43313, CaptureEndX:-70.06283, CaptureEndY:45.43313, VectorBeginX:71.65094, VectorBeginY:45.43313, VectorEndX:-72.01932, VectorEndY:45.43313, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:11:11.560 [Thd =70]  Info Default ***row:28, vectorBeginX:71.651, vectorBeginY:45.433, captureBeginX:70.086, captureBeginY:45.433, captureEndX:-70.063, captureEndY:45.433, vectorEndX:-72.019, vectorEndY:45.433
2025-08-03 10:11:11.560 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:11.561 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0860503261613,EndPoint:70.062830867716
2025-08-03 10:11:11.893 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:11.896 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_27_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:12.053 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:12
2025-08-03 10:11:12.065 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:12
2025-08-03 10:11:16.406 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:28
2025-08-03 10:11:16.406 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:16.406 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:16.409 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:28
2025-08-03 10:11:16.409 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:16.409 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:A_SourceLightType
2025-08-03 10:11:16.409 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:B_SourceLightType
2025-08-03 10:11:16.409 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,A_SourceLightType
2025-08-03 10:11:16.409 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,B_SourceLightType
2025-08-03 10:11:16.585 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;28/261,
2025-08-03 10:11:16.594 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:16.638 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:16.863 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:16.865 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_28_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:16.983 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 29
2025-08-03 10:11:16.983 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 29
2025-08-03 10:11:16.983 [Thd =68]  Info Default  开始扫描条带； [29/261]
2025-08-03 10:11:16.992 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:11:16.995 [Thd =70]  Info Default ***row:29, vectorBeginX:-72.019, vectorBeginY:45.005, captureBeginX:-70.400, captureBeginY:45.005, captureEndX:69.749, captureEndY:45.005, vectorEndX:71.651, vectorEndY:45.005
2025-08-03 10:11:16.995 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:16.997 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4002349028799,EndPoint:-69.7486462909974
2025-08-03 10:11:17.333 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:17.336 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_28_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:18.585 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:18
2025-08-03 10:11:18.597 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:18
2025-08-03 10:11:21.844 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:29
2025-08-03 10:11:21.844 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:21.844 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:21.847 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:29
2025-08-03 10:11:21.847 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:21.847 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:A_SourceLightType
2025-08-03 10:11:21.847 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,A_SourceLightType
2025-08-03 10:11:21.847 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,B_SourceLightType
2025-08-03 10:11:21.847 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:B_SourceLightType
2025-08-03 10:11:22.017 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;29/261,
2025-08-03 10:11:22.026 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:22.077 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:22.303 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:22.305 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_29_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:22.418 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 30
2025-08-03 10:11:22.418 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 30
2025-08-03 10:11:22.418 [Thd =41]  Info Default  开始扫描条带； [30/261]
2025-08-03 10:11:22.427 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:11:22.429 [Thd =70]  Info Default CaptureBeginX: 70.08609, CaptureBeginY:44.57650, CaptureEndX:-70.06279, CaptureEndY:44.57650, VectorBeginX:71.65098, VectorBeginY:44.57650, VectorEndX:-72.01928, VectorEndY:44.57650, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:11:22.430 [Thd =70]  Info Default ***row:30, vectorBeginX:71.651, vectorBeginY:44.577, captureBeginX:70.086, captureBeginY:44.577, captureEndX:-70.063, captureEndY:44.577, vectorEndX:-72.019, vectorEndY:44.577
2025-08-03 10:11:22.430 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:22.432 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0860874175006,EndPoint:70.0627937763767
2025-08-03 10:11:22.770 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:22.772 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_29_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:23.615 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:23
2025-08-03 10:11:23.636 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:23
2025-08-03 10:11:27.277 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:30
2025-08-03 10:11:27.277 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:27.277 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:27.279 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:30
2025-08-03 10:11:27.279 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:27.279 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:A_SourceLightType
2025-08-03 10:11:27.279 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:B_SourceLightType
2025-08-03 10:11:27.279 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,A_SourceLightType
2025-08-03 10:11:27.279 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,B_SourceLightType
2025-08-03 10:11:27.459 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;30/261,
2025-08-03 10:11:27.468 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:27.505 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:27.737 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:27.740 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_30_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:27.851 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 31
2025-08-03 10:11:27.851 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 31
2025-08-03 10:11:27.851 [Thd =68]  Info Default  开始扫描条带； [31/261]
2025-08-03 10:11:27.863 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:11:27.865 [Thd =70]  Info Default ***row:31, vectorBeginX:-72.019, vectorBeginY:44.148, captureBeginX:-70.400, captureBeginY:44.148, captureEndX:69.749, captureEndY:44.148, vectorEndX:71.651, vectorEndY:44.148
2025-08-03 10:11:27.866 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:27.868 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4001978115406,EndPoint:-69.7486833823367
2025-08-03 10:11:28.215 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:28.218 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_30_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:29.656 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:29
2025-08-03 10:11:29.675 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:29
2025-08-03 10:11:32.715 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:31
2025-08-03 10:11:32.715 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:32.715 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:32.717 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:31
2025-08-03 10:11:32.717 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:32.717 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:A_SourceLightType
2025-08-03 10:11:32.717 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:B_SourceLightType
2025-08-03 10:11:32.717 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,A_SourceLightType
2025-08-03 10:11:32.719 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,B_SourceLightType
2025-08-03 10:11:32.887 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;31/261,
2025-08-03 10:11:32.897 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:32.958 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:33.176 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:33.178 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_31_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:33.293 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 32
2025-08-03 10:11:33.293 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 32
2025-08-03 10:11:33.293 [Thd =67]  Info Default  开始扫描条带； [32/261]
2025-08-03 10:11:33.302 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:11:33.305 [Thd =70]  Info Default CaptureBeginX: 70.08612, CaptureBeginY:43.71988, CaptureEndX:-70.06276, CaptureEndY:43.71988, VectorBeginX:71.65101, VectorBeginY:43.71988, VectorEndX:-72.01925, VectorEndY:43.71988, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:11:33.305 [Thd =70]  Info Default ***row:32, vectorBeginX:71.651, vectorBeginY:43.720, captureBeginX:70.086, captureBeginY:43.720, captureEndX:-70.063, captureEndY:43.720, vectorEndX:-72.019, vectorEndY:43.720
2025-08-03 10:11:33.305 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:33.306 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0861245088399,EndPoint:70.0627566850374
2025-08-03 10:11:33.649 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:33.651 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_31_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:33.688 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:33
2025-08-03 10:11:33.700 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:33
2025-08-03 10:11:38.154 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:32
2025-08-03 10:11:38.155 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:38.155 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:38.157 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:32
2025-08-03 10:11:38.157 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:38.157 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:A_SourceLightType
2025-08-03 10:11:38.157 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:B_SourceLightType
2025-08-03 10:11:38.157 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,A_SourceLightType
2025-08-03 10:11:38.157 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,B_SourceLightType
2025-08-03 10:11:38.328 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;32/261,
2025-08-03 10:11:38.337 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:38.391 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:38.616 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:38.619 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_32_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:38.727 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 33
2025-08-03 10:11:38.727 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 33
2025-08-03 10:11:38.727 [Thd =50]  Info Default  开始扫描条带； [33/261]
2025-08-03 10:11:38.736 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:11:38.739 [Thd =70]  Info Default ***row:33, vectorBeginX:-72.019, vectorBeginY:43.292, captureBeginX:-70.400, captureBeginY:43.292, captureEndX:69.749, captureEndY:43.292, vectorEndX:71.651, vectorEndY:43.292
2025-08-03 10:11:38.739 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:38.741 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4001607202013,EndPoint:-69.7487204736759
2025-08-03 10:11:39.094 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:39.097 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_32_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:40.222 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:40
2025-08-03 10:11:40.234 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:40
2025-08-03 10:11:43.588 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:33
2025-08-03 10:11:43.588 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:43.588 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:43.590 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:33
2025-08-03 10:11:43.590 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:43.590 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:A_SourceLightType
2025-08-03 10:11:43.590 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:B_SourceLightType
2025-08-03 10:11:43.590 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,A_SourceLightType
2025-08-03 10:11:43.591 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,B_SourceLightType
2025-08-03 10:11:43.764 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;33/261,
2025-08-03 10:11:43.773 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:43.830 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:44.057 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:44.059 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_33_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:44.181 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 34
2025-08-03 10:11:44.181 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 34
2025-08-03 10:11:44.181 [Thd =41]  Info Default  开始扫描条带； [34/261]
2025-08-03 10:11:44.190 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:11:44.197 [Thd =70]  Info Default CaptureBeginX: 70.08616, CaptureBeginY:42.86325, CaptureEndX:-70.06272, CaptureEndY:42.86325, VectorBeginX:71.65105, VectorBeginY:42.86325, VectorEndX:-72.01921, VectorEndY:42.86325, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:11:44.197 [Thd =70]  Info Default ***row:34, vectorBeginX:71.651, vectorBeginY:42.863, captureBeginX:70.086, captureBeginY:42.863, captureEndX:-70.063, captureEndY:42.863, vectorEndX:-72.019, vectorEndY:42.863
2025-08-03 10:11:44.197 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:44.198 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0861616001792,EndPoint:70.0627195936981
2025-08-03 10:11:44.531 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:44.538 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_33_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:44.749 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:44
2025-08-03 10:11:44.761 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:44
2025-08-03 10:11:49.044 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:34
2025-08-03 10:11:49.044 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:49.044 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:49.046 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:34
2025-08-03 10:11:49.046 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:49.046 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:A_SourceLightType
2025-08-03 10:11:49.046 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:B_SourceLightType
2025-08-03 10:11:49.046 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,A_SourceLightType
2025-08-03 10:11:49.046 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,B_SourceLightType
2025-08-03 10:11:49.225 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;34/261,
2025-08-03 10:11:49.234 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:49.277 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:49.504 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:49.506 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_34_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:49.622 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 35
2025-08-03 10:11:49.622 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 35
2025-08-03 10:11:49.622 [Thd =67]  Info Default  开始扫描条带； [35/261]
2025-08-03 10:11:49.631 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:11:49.634 [Thd =70]  Info Default ***row:35, vectorBeginX:-72.019, vectorBeginY:42.435, captureBeginX:-70.400, captureBeginY:42.435, captureEndX:69.749, captureEndY:42.435, vectorEndX:71.651, vectorEndY:42.435
2025-08-03 10:11:49.634 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:49.636 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.400123628862,EndPoint:-69.7487575650152
2025-08-03 10:11:49.977 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:49.979 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_34_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:50.781 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:50
2025-08-03 10:11:50.793 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:50
2025-08-03 10:11:54.484 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:35
2025-08-03 10:11:54.484 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:54.484 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:11:54.486 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:35
2025-08-03 10:11:54.487 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:54.487 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:A_SourceLightType
2025-08-03 10:11:54.487 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:B_SourceLightType
2025-08-03 10:11:54.487 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,A_SourceLightType
2025-08-03 10:11:54.487 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,B_SourceLightType
2025-08-03 10:11:54.659 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;35/261,
2025-08-03 10:11:54.670 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:11:54.725 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:11:54.944 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:11:54.946 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_35_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:55.063 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 36
2025-08-03 10:11:55.063 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 36
2025-08-03 10:11:55.063 [Thd =68]  Info Default  开始扫描条带； [36/261]
2025-08-03 10:11:55.072 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:11:55.075 [Thd =70]  Info Default CaptureBeginX: 70.08620, CaptureBeginY:42.00663, CaptureEndX:-70.06268, CaptureEndY:42.00663, VectorBeginX:71.65109, VectorBeginY:42.00663, VectorEndX:-72.01917, VectorEndY:42.00663, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:11:55.075 [Thd =70]  Info Default ***row:36, vectorBeginX:71.651, vectorBeginY:42.007, captureBeginX:70.086, captureBeginY:42.007, captureEndX:-70.063, captureEndY:42.007, vectorEndX:-72.019, vectorEndY:42.007
2025-08-03 10:11:55.075 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:11:55.077 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0861986915184,EndPoint:70.0626825023588
2025-08-03 10:11:55.415 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:11:55.417 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_35_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:11:55.810 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:11:55
2025-08-03 10:11:55.829 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:11:55
2025-08-03 10:11:59.924 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:36
2025-08-03 10:11:59.924 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:11:59.924 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:00.067 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:36
2025-08-03 10:12:00.068 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:00.068 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:B_SourceLightType
2025-08-03 10:12:00.068 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:A_SourceLightType
2025-08-03 10:12:00.068 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,B_SourceLightType
2025-08-03 10:12:00.068 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,A_SourceLightType
2025-08-03 10:12:00.098 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;36/261,
2025-08-03 10:12:00.108 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:00.163 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:00.509 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 37
2025-08-03 10:12:00.509 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 37
2025-08-03 10:12:00.509 [Thd =34]  Info Default  开始扫描条带； [37/261]
2025-08-03 10:12:00.518 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:12:00.521 [Thd =70]  Info Default ***row:37, vectorBeginX:-72.019, vectorBeginY:41.578, captureBeginX:-70.400, captureBeginY:41.578, captureEndX:69.749, captureEndY:41.578, vectorEndX:71.651, vectorEndY:41.578
2025-08-03 10:12:00.521 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:00.522 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4000865375227,EndPoint:-69.7487946563545
2025-08-03 10:12:00.523 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:00.526 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_36_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:01.009 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:01.012 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_36_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:01.850 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:01
2025-08-03 10:12:01.862 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:01
2025-08-03 10:12:05.370 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:37
2025-08-03 10:12:05.370 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:05.370 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:05.372 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:37
2025-08-03 10:12:05.372 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:05.372 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:A_SourceLightType
2025-08-03 10:12:05.372 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:B_SourceLightType
2025-08-03 10:12:05.373 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,A_SourceLightType
2025-08-03 10:12:05.373 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,B_SourceLightType
2025-08-03 10:12:05.543 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;37/261,
2025-08-03 10:12:05.552 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:05.590 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:05.839 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:05.841 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_37_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:05.924 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 38
2025-08-03 10:12:05.924 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 38
2025-08-03 10:12:05.924 [Thd =34]  Info Default  开始扫描条带； [38/261]
2025-08-03 10:12:05.933 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:12:05.936 [Thd =70]  Info Default CaptureBeginX: 70.08624, CaptureBeginY:41.15000, CaptureEndX:-70.06265, CaptureEndY:41.15000, VectorBeginX:71.65113, VectorBeginY:41.15000, VectorEndX:-72.01913, VectorEndY:41.15000, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:12:05.936 [Thd =70]  Info Default ***row:38, vectorBeginX:71.651, vectorBeginY:41.150, captureBeginX:70.086, captureBeginY:41.150, captureEndX:-70.063, captureEndY:41.150, vectorEndX:-72.019, vectorEndY:41.150
2025-08-03 10:12:05.936 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:05.938 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0862357828577,EndPoint:70.0626454110195
2025-08-03 10:12:06.315 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:06.317 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_37_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:07.380 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:07
2025-08-03 10:12:07.391 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:07
2025-08-03 10:12:10.783 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:38
2025-08-03 10:12:10.783 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:10.783 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:10.785 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:38
2025-08-03 10:12:10.785 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:10.785 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:A_SourceLightType
2025-08-03 10:12:10.785 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:B_SourceLightType
2025-08-03 10:12:10.785 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,A_SourceLightType
2025-08-03 10:12:10.786 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,B_SourceLightType
2025-08-03 10:12:10.965 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;38/261,
2025-08-03 10:12:10.975 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:11.027 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:11.268 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:11.270 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_38_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:11.364 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 39
2025-08-03 10:12:11.364 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 39
2025-08-03 10:12:11.367 [Thd =41]  Info Default  开始扫描条带； [39/261]
2025-08-03 10:12:11.385 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:12:11.387 [Thd =70]  Info Default ***row:39, vectorBeginX:-72.019, vectorBeginY:40.722, captureBeginX:-70.400, captureBeginY:40.722, captureEndX:69.749, captureEndY:40.722, vectorEndX:71.651, vectorEndY:40.722
2025-08-03 10:12:11.388 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:11.389 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4000494461834,EndPoint:-69.7488317476938
2025-08-03 10:12:11.742 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:11.744 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_38_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:12.910 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:12
2025-08-03 10:12:12.923 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:12
2025-08-03 10:12:16.236 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:39
2025-08-03 10:12:16.236 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:16.236 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:16.238 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:39
2025-08-03 10:12:16.239 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:16.239 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:A_SourceLightType
2025-08-03 10:12:16.239 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:B_SourceLightType
2025-08-03 10:12:16.239 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,A_SourceLightType
2025-08-03 10:12:16.239 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,B_SourceLightType
2025-08-03 10:12:16.407 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;39/261,
2025-08-03 10:12:16.416 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:16.468 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:16.699 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:16.701 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_39_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:16.806 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 40
2025-08-03 10:12:16.806 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 40
2025-08-03 10:12:16.806 [Thd =68]  Info Default  开始扫描条带； [40/261]
2025-08-03 10:12:16.815 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:12:16.817 [Thd =70]  Info Default CaptureBeginX: 70.08627, CaptureBeginY:40.29337, CaptureEndX:-70.06261, CaptureEndY:40.29337, VectorBeginX:71.65116, VectorBeginY:40.29337, VectorEndX:-72.01910, VectorEndY:40.29337, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:12:16.817 [Thd =70]  Info Default ***row:40, vectorBeginX:71.651, vectorBeginY:40.293, captureBeginX:70.086, captureBeginY:40.293, captureEndX:-70.063, captureEndY:40.293, vectorEndX:-72.019, vectorEndY:40.293
2025-08-03 10:12:16.817 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:16.819 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.086272874197,EndPoint:70.0626083196802
2025-08-03 10:12:17.168 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:17.170 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_39_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:17.438 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:17
2025-08-03 10:12:17.451 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:17
2025-08-03 10:12:21.664 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:40
2025-08-03 10:12:21.664 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:21.664 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:21.666 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:40
2025-08-03 10:12:21.666 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:21.666 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:A_SourceLightType
2025-08-03 10:12:21.666 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:B_SourceLightType
2025-08-03 10:12:21.666 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,A_SourceLightType
2025-08-03 10:12:21.666 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,B_SourceLightType
2025-08-03 10:12:21.843 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;40/261,
2025-08-03 10:12:21.852 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:21.948 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:22.123 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:22.126 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_40_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:22.283 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 41
2025-08-03 10:12:22.283 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 41
2025-08-03 10:12:22.283 [Thd =34]  Info Default  开始扫描条带； [41/261]
2025-08-03 10:12:22.294 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:12:22.297 [Thd =70]  Info Default ***row:41, vectorBeginX:-72.019, vectorBeginY:39.865, captureBeginX:-70.400, captureBeginY:39.865, captureEndX:69.749, captureEndY:39.865, vectorEndX:71.651, vectorEndY:39.865
2025-08-03 10:12:22.297 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:22.298 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.4000123548441,EndPoint:-69.7488688390331
2025-08-03 10:12:22.596 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:22.599 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_40_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:23.973 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:23
2025-08-03 10:12:23.992 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:23
2025-08-03 10:12:27.145 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:41
2025-08-03 10:12:27.145 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:27.146 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:27.147 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:41
2025-08-03 10:12:27.147 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:27.148 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:A_SourceLightType
2025-08-03 10:12:27.148 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:B_SourceLightType
2025-08-03 10:12:27.148 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,A_SourceLightType
2025-08-03 10:12:27.148 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,B_SourceLightType
2025-08-03 10:12:27.317 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;41/261,
2025-08-03 10:12:27.327 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:27.384 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:27.605 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:27.608 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_41_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:27.722 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 42
2025-08-03 10:12:27.722 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 42
2025-08-03 10:12:27.722 [Thd =51]  Info Default  开始扫描条带； [42/261]
2025-08-03 10:12:27.731 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:12:27.733 [Thd =70]  Info Default CaptureBeginX: 70.08631, CaptureBeginY:39.43675, CaptureEndX:-70.06257, CaptureEndY:39.43675, VectorBeginX:71.65120, VectorBeginY:39.43675, VectorEndX:-72.01906, VectorEndY:39.43675, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:12:27.733 [Thd =70]  Info Default ***row:42, vectorBeginX:71.651, vectorBeginY:39.437, captureBeginX:70.086, captureBeginY:39.437, captureEndX:-70.063, captureEndY:39.437, vectorEndX:-72.019, vectorEndY:39.437
2025-08-03 10:12:27.733 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:27.735 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0863099655363,EndPoint:70.0625712283409
2025-08-03 10:12:28.081 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:28.083 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_41_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:29.010 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:29
2025-08-03 10:12:29.021 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:29
2025-08-03 10:12:32.580 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:42
2025-08-03 10:12:32.580 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:32.580 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:32.583 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:42
2025-08-03 10:12:32.583 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:32.583 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:A_SourceLightType
2025-08-03 10:12:32.583 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:B_SourceLightType
2025-08-03 10:12:32.583 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,A_SourceLightType
2025-08-03 10:12:32.583 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,B_SourceLightType
2025-08-03 10:12:32.762 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;42/261,
2025-08-03 10:12:32.771 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:32.818 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:33.043 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:33.048 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_42_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:33.154 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 43
2025-08-03 10:12:33.154 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 43
2025-08-03 10:12:33.154 [Thd =64]  Info Default  开始扫描条带； [43/261]
2025-08-03 10:12:33.163 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:12:33.166 [Thd =70]  Info Default ***row:43, vectorBeginX:-72.019, vectorBeginY:39.008, captureBeginX:-70.400, captureBeginY:39.008, captureEndX:69.749, captureEndY:39.008, vectorEndX:71.651, vectorEndY:39.008
2025-08-03 10:12:33.166 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:33.168 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3999752635048,EndPoint:-69.7489059303724
2025-08-03 10:12:33.547 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:33.549 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_42_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:34.540 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:34
2025-08-03 10:12:34.552 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:34
2025-08-03 10:12:38.016 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:43
2025-08-03 10:12:38.016 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:38.016 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:38.018 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:43
2025-08-03 10:12:38.018 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:38.018 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:A_SourceLightType
2025-08-03 10:12:38.018 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:B_SourceLightType
2025-08-03 10:12:38.019 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,A_SourceLightType
2025-08-03 10:12:38.019 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,B_SourceLightType
2025-08-03 10:12:38.193 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;43/261,
2025-08-03 10:12:38.202 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:38.249 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:38.477 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:38.479 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_43_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:38.583 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 44
2025-08-03 10:12:38.583 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 44
2025-08-03 10:12:38.583 [Thd =64]  Info Default  开始扫描条带； [44/261]
2025-08-03 10:12:38.592 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:12:38.595 [Thd =70]  Info Default CaptureBeginX: 70.08635, CaptureBeginY:38.58012, CaptureEndX:-70.06253, CaptureEndY:38.58012, VectorBeginX:71.65124, VectorBeginY:38.58012, VectorEndX:-72.01902, VectorEndY:38.58012, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:12:38.595 [Thd =70]  Info Default ***row:44, vectorBeginX:71.651, vectorBeginY:38.580, captureBeginX:70.086, captureBeginY:38.580, captureEndX:-70.063, captureEndY:38.580, vectorEndX:-72.019, vectorEndY:38.580
2025-08-03 10:12:38.595 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:38.596 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0863470568756,EndPoint:70.0625341370016
2025-08-03 10:12:38.950 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:38.952 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_43_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:39.069 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:39
2025-08-03 10:12:39.083 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:39
2025-08-03 10:12:43.441 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:44
2025-08-03 10:12:43.441 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:43.442 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:43.444 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:44
2025-08-03 10:12:43.444 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:43.444 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:A_SourceLightType
2025-08-03 10:12:43.444 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:B_SourceLightType
2025-08-03 10:12:43.444 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,A_SourceLightType
2025-08-03 10:12:43.444 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,B_SourceLightType
2025-08-03 10:12:43.617 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;44/261,
2025-08-03 10:12:43.627 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:43.673 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:43.905 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:43.908 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_44_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:44.019 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 45
2025-08-03 10:12:44.019 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 45
2025-08-03 10:12:44.019 [Thd =55]  Info Default  开始扫描条带； [45/261]
2025-08-03 10:12:44.028 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:12:44.031 [Thd =70]  Info Default ***row:45, vectorBeginX:-72.019, vectorBeginY:38.152, captureBeginX:-70.400, captureBeginY:38.152, captureEndX:69.749, captureEndY:38.152, vectorEndX:71.651, vectorEndY:38.152
2025-08-03 10:12:44.031 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:44.033 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3999381721655,EndPoint:-69.7489430217117
2025-08-03 10:12:44.379 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:44.382 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_44_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:45.606 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:45
2025-08-03 10:12:45.620 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:45
2025-08-03 10:12:48.880 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:45
2025-08-03 10:12:48.881 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:48.881 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:48.883 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:45
2025-08-03 10:12:48.883 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:48.883 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:A_SourceLightType
2025-08-03 10:12:48.883 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:B_SourceLightType
2025-08-03 10:12:48.884 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,A_SourceLightType
2025-08-03 10:12:48.884 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,B_SourceLightType
2025-08-03 10:12:49.058 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;45/261,
2025-08-03 10:12:49.067 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:49.111 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:49.343 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:49.345 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_45_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:49.457 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 46
2025-08-03 10:12:49.457 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 46
2025-08-03 10:12:49.457 [Thd =44]  Info Default  开始扫描条带； [46/261]
2025-08-03 10:12:49.466 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:12:49.469 [Thd =70]  Info Default CaptureBeginX: 70.08638, CaptureBeginY:37.72350, CaptureEndX:-70.06250, CaptureEndY:37.72350, VectorBeginX:71.65127, VectorBeginY:37.72350, VectorEndX:-72.01899, VectorEndY:37.72350, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:12:49.469 [Thd =70]  Info Default ***row:46, vectorBeginX:71.651, vectorBeginY:37.723, captureBeginX:70.086, captureBeginY:37.723, captureEndX:-70.062, captureEndY:37.723, vectorEndX:-72.019, vectorEndY:37.723
2025-08-03 10:12:49.469 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:49.470 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0863841482149,EndPoint:70.0624970456623
2025-08-03 10:12:49.819 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:49.821 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_45_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:50.636 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:50
2025-08-03 10:12:50.647 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:50
2025-08-03 10:12:54.317 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:46
2025-08-03 10:12:54.317 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:54.317 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:54.319 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:46
2025-08-03 10:12:54.320 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:54.320 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:A_SourceLightType
2025-08-03 10:12:54.320 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:B_SourceLightType
2025-08-03 10:12:54.320 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,A_SourceLightType
2025-08-03 10:12:54.320 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,B_SourceLightType
2025-08-03 10:12:54.490 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;46/261,
2025-08-03 10:12:54.500 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:54.536 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:12:54.781 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:12:54.783 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_46_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:54.872 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 47
2025-08-03 10:12:54.872 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 47
2025-08-03 10:12:54.872 [Thd =67]  Info Default  开始扫描条带； [47/261]
2025-08-03 10:12:54.881 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:12:54.884 [Thd =70]  Info Default ***row:47, vectorBeginX:-72.019, vectorBeginY:37.295, captureBeginX:-70.400, captureBeginY:37.295, captureEndX:69.749, captureEndY:37.295, vectorEndX:71.651, vectorEndY:37.295
2025-08-03 10:12:54.884 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:12:54.886 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3999010808262,EndPoint:-69.748980113051
2025-08-03 10:12:55.260 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:12:55.263 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_46_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:12:56.667 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:12:56
2025-08-03 10:12:56.679 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:12:56
2025-08-03 10:12:59.735 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:47
2025-08-03 10:12:59.735 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:59.735 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:12:59.736 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:47
2025-08-03 10:12:59.737 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:12:59.737 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:B_SourceLightType
2025-08-03 10:12:59.737 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:A_SourceLightType
2025-08-03 10:12:59.737 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,B_SourceLightType
2025-08-03 10:12:59.737 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,A_SourceLightType
2025-08-03 10:12:59.907 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;47/261,
2025-08-03 10:12:59.916 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:12:59.971 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:00.200 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:00.202 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_47_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:00.307 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 48
2025-08-03 10:13:00.307 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 48
2025-08-03 10:13:00.307 [Thd =64]  Info Default  开始扫描条带； [48/261]
2025-08-03 10:13:00.316 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:13:00.319 [Thd =70]  Info Default CaptureBeginX: 70.08642, CaptureBeginY:36.86687, CaptureEndX:-70.06246, CaptureEndY:36.86687, VectorBeginX:71.65131, VectorBeginY:36.86687, VectorEndX:-72.01895, VectorEndY:36.86687, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:13:00.319 [Thd =70]  Info Default ***row:48, vectorBeginX:71.651, vectorBeginY:36.867, captureBeginX:70.086, captureBeginY:36.867, captureEndX:-70.062, captureEndY:36.867, vectorEndX:-72.019, vectorEndY:36.867
2025-08-03 10:13:00.319 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:00.320 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0864212395542,EndPoint:70.062459954323
2025-08-03 10:13:00.675 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:00.677 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_47_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:00.693 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:00
2025-08-03 10:13:00.704 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:00
2025-08-03 10:13:05.165 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:48
2025-08-03 10:13:05.165 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:05.165 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:05.167 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:48
2025-08-03 10:13:05.167 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:05.168 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:A_SourceLightType
2025-08-03 10:13:05.168 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:B_SourceLightType
2025-08-03 10:13:05.168 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,A_SourceLightType
2025-08-03 10:13:05.168 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,B_SourceLightType
2025-08-03 10:13:05.350 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;48/261,
2025-08-03 10:13:05.360 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:05.407 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:05.626 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:05.629 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_48_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:05.741 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 49
2025-08-03 10:13:05.741 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 49
2025-08-03 10:13:05.741 [Thd =41]  Info Default  开始扫描条带； [49/261]
2025-08-03 10:13:05.750 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:13:05.753 [Thd =70]  Info Default ***row:49, vectorBeginX:-72.019, vectorBeginY:36.439, captureBeginX:-70.400, captureBeginY:36.439, captureEndX:69.749, captureEndY:36.439, vectorEndX:71.651, vectorEndY:36.439
2025-08-03 10:13:05.753 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:05.754 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3998639894869,EndPoint:-69.7490172043903
2025-08-03 10:13:06.105 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:06.108 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_48_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:07.227 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:07
2025-08-03 10:13:07.239 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:07
2025-08-03 10:13:10.601 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:49
2025-08-03 10:13:10.601 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:10.601 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:10.603 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:49
2025-08-03 10:13:10.603 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:10.603 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:A_SourceLightType
2025-08-03 10:13:10.603 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:B_SourceLightType
2025-08-03 10:13:10.603 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,A_SourceLightType
2025-08-03 10:13:10.603 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,B_SourceLightType
2025-08-03 10:13:10.776 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;49/261,
2025-08-03 10:13:10.785 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:10.846 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:11.063 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:11.066 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_49_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:11.192 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 50
2025-08-03 10:13:11.192 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 50
2025-08-03 10:13:11.192 [Thd =62]  Info Default  开始扫描条带； [50/261]
2025-08-03 10:13:11.201 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:13:11.204 [Thd =70]  Info Default CaptureBeginX: 70.08646, CaptureBeginY:36.01025, CaptureEndX:-70.06242, CaptureEndY:36.01025, VectorBeginX:71.65135, VectorBeginY:36.01025, VectorEndX:-72.01891, VectorEndY:36.01025, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:13:11.204 [Thd =70]  Info Default ***row:50, vectorBeginX:71.651, vectorBeginY:36.010, captureBeginX:70.086, captureBeginY:36.010, captureEndX:-70.062, captureEndY:36.010, vectorEndX:-72.019, vectorEndY:36.010
2025-08-03 10:13:11.204 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:11.206 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0864583308935,EndPoint:70.0624228629837
2025-08-03 10:13:11.538 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:11.540 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":49,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_49_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:12.255 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:12
2025-08-03 10:13:12.276 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:12
2025-08-03 10:13:16.050 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:50
2025-08-03 10:13:16.050 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:16.050 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:16.052 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:50
2025-08-03 10:13:16.052 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:50,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:16.052 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:A_SourceLightType
2025-08-03 10:13:16.053 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:50,source_light_Type:B_SourceLightType
2025-08-03 10:13:16.053 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,A_SourceLightType
2025-08-03 10:13:16.053 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：50,B_SourceLightType
2025-08-03 10:13:16.225 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;50/261,
2025-08-03 10:13:16.234 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:16.272 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:16.518 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:16.521 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_50_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:16.607 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 51
2025-08-03 10:13:16.607 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 51
2025-08-03 10:13:16.607 [Thd =42]  Info Default  开始扫描条带； [51/261]
2025-08-03 10:13:16.622 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:13:16.624 [Thd =70]  Info Default ***row:51, vectorBeginX:-72.019, vectorBeginY:35.582, captureBeginX:-70.400, captureBeginY:35.582, captureEndX:69.749, captureEndY:35.582, vectorEndX:71.651, vectorEndY:35.582
2025-08-03 10:13:16.624 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:16.626 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3998268981476,EndPoint:-69.7490542957296
2025-08-03 10:13:17.001 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:17.010 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":50,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_50_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:17.797 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:17
2025-08-03 10:13:17.809 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:17
2025-08-03 10:13:21.477 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:51
2025-08-03 10:13:21.477 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:21.477 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:21.479 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:51
2025-08-03 10:13:21.479 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:51,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:21.479 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:A_SourceLightType
2025-08-03 10:13:21.479 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:51,source_light_Type:B_SourceLightType
2025-08-03 10:13:21.479 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,A_SourceLightType
2025-08-03 10:13:21.479 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：51,B_SourceLightType
2025-08-03 10:13:21.648 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;51/261,
2025-08-03 10:13:21.657 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:21.705 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:21.937 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:21.939 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_51_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:22.043 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 52
2025-08-03 10:13:22.043 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 52
2025-08-03 10:13:22.043 [Thd =68]  Info Default  开始扫描条带； [52/261]
2025-08-03 10:13:22.060 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:13:22.063 [Thd =70]  Info Default CaptureBeginX: 70.08650, CaptureBeginY:35.15362, CaptureEndX:-70.06239, CaptureEndY:35.15362, VectorBeginX:71.65139, VectorBeginY:35.15362, VectorEndX:-72.01887, VectorEndY:35.15362, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:13:22.063 [Thd =70]  Info Default ***row:52, vectorBeginX:71.651, vectorBeginY:35.154, captureBeginX:70.086, captureBeginY:35.154, captureEndX:-70.062, captureEndY:35.154, vectorEndX:-72.019, vectorEndY:35.154
2025-08-03 10:13:22.063 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:22.066 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0864954222328,EndPoint:70.0623857716444
2025-08-03 10:13:22.324 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:22
2025-08-03 10:13:22.344 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:22
2025-08-03 10:13:22.408 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:22.410 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":51,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_51_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:26.915 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:52
2025-08-03 10:13:26.915 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:26.915 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:26.917 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:52
2025-08-03 10:13:26.918 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:52,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:26.918 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:A_SourceLightType
2025-08-03 10:13:26.918 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:52,source_light_Type:B_SourceLightType
2025-08-03 10:13:26.918 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,A_SourceLightType
2025-08-03 10:13:26.918 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：52,B_SourceLightType
2025-08-03 10:13:27.087 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;52/261,
2025-08-03 10:13:27.096 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:27.140 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:27.375 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:27.377 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_52_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:27.485 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 53
2025-08-03 10:13:27.485 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 53
2025-08-03 10:13:27.485 [Thd =62]  Info Default  开始扫描条带； [53/261]
2025-08-03 10:13:27.494 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:13:27.497 [Thd =70]  Info Default ***row:53, vectorBeginX:-72.019, vectorBeginY:34.725, captureBeginX:-70.400, captureBeginY:34.725, captureEndX:69.749, captureEndY:34.725, vectorEndX:71.651, vectorEndY:34.725
2025-08-03 10:13:27.497 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:27.498 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3997898068083,EndPoint:-69.7490913870689
2025-08-03 10:13:27.849 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:27.851 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":52,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_52_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:28.364 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:28
2025-08-03 10:13:28.376 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:28
2025-08-03 10:13:32.345 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:53
2025-08-03 10:13:32.346 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:32.346 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:32.347 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:53
2025-08-03 10:13:32.348 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:53,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:32.348 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:A_SourceLightType
2025-08-03 10:13:32.348 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:53,source_light_Type:B_SourceLightType
2025-08-03 10:13:32.348 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,A_SourceLightType
2025-08-03 10:13:32.348 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：53,B_SourceLightType
2025-08-03 10:13:32.523 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;53/261,
2025-08-03 10:13:32.532 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:32.584 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:32.804 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:32.806 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_53_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:32.917 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 54
2025-08-03 10:13:32.917 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 54
2025-08-03 10:13:32.917 [Thd =42]  Info Default  开始扫描条带； [54/261]
2025-08-03 10:13:32.926 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:13:32.929 [Thd =70]  Info Default CaptureBeginX: 70.08653, CaptureBeginY:34.29700, CaptureEndX:-70.06235, CaptureEndY:34.29700, VectorBeginX:71.65142, VectorBeginY:34.29700, VectorEndX:-72.01884, VectorEndY:34.29700, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:13:32.929 [Thd =70]  Info Default ***row:54, vectorBeginX:71.651, vectorBeginY:34.297, captureBeginX:70.087, captureBeginY:34.297, captureEndX:-70.062, captureEndY:34.297, vectorEndX:-72.019, vectorEndY:34.297
2025-08-03 10:13:32.929 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:32.930 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0865325135721,EndPoint:70.0623486803051
2025-08-03 10:13:33.278 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:33.281 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":53,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_53_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:33.895 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:33
2025-08-03 10:13:33.907 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:33
2025-08-03 10:13:37.775 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:54
2025-08-03 10:13:37.775 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:37.775 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:37.777 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:54
2025-08-03 10:13:37.777 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:54,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:37.777 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:A_SourceLightType
2025-08-03 10:13:37.777 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,A_SourceLightType
2025-08-03 10:13:37.777 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：54,B_SourceLightType
2025-08-03 10:13:37.778 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:54,source_light_Type:B_SourceLightType
2025-08-03 10:13:37.956 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;54/261,
2025-08-03 10:13:37.965 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:38.015 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:38.236 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:38.239 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_54_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:38.360 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 55
2025-08-03 10:13:38.360 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 55
2025-08-03 10:13:38.360 [Thd =55]  Info Default  开始扫描条带； [55/261]
2025-08-03 10:13:38.369 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:13:38.374 [Thd =70]  Info Default ***row:55, vectorBeginX:-72.019, vectorBeginY:33.869, captureBeginX:-70.400, captureBeginY:33.869, captureEndX:69.749, captureEndY:33.869, vectorEndX:71.651, vectorEndY:33.869
2025-08-03 10:13:38.375 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:38.376 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.399752715469,EndPoint:-69.7491284784082
2025-08-03 10:13:38.708 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:38.712 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":54,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_54_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:40.428 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:40
2025-08-03 10:13:40.448 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:40
2025-08-03 10:13:43.224 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:55
2025-08-03 10:13:43.224 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:43.224 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:43.227 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:55
2025-08-03 10:13:43.227 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:55,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:43.227 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:A_SourceLightType
2025-08-03 10:13:43.227 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,A_SourceLightType
2025-08-03 10:13:43.227 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：55,B_SourceLightType
2025-08-03 10:13:43.227 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:55,source_light_Type:B_SourceLightType
2025-08-03 10:13:43.400 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;55/261,
2025-08-03 10:13:43.410 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:43.477 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:43.686 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:43.689 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_55_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:43.811 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 56
2025-08-03 10:13:43.811 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 56
2025-08-03 10:13:43.811 [Thd =62]  Info Default  开始扫描条带； [56/261]
2025-08-03 10:13:43.820 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:13:43.823 [Thd =70]  Info Default CaptureBeginX: 70.08657, CaptureBeginY:33.44037, CaptureEndX:-70.06231, CaptureEndY:33.44037, VectorBeginX:71.65146, VectorBeginY:33.44037, VectorEndX:-72.01880, VectorEndY:33.44037, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:13:43.823 [Thd =70]  Info Default ***row:56, vectorBeginX:71.651, vectorBeginY:33.440, captureBeginX:70.087, captureBeginY:33.440, captureEndX:-70.062, captureEndY:33.440, vectorEndX:-72.019, vectorEndY:33.440
2025-08-03 10:13:43.823 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:43.825 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0865696049114,EndPoint:70.0623115889658
2025-08-03 10:13:44.165 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:44.168 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":55,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_55_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:44.461 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:44
2025-08-03 10:13:44.472 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:44
2025-08-03 10:13:48.670 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:56
2025-08-03 10:13:48.670 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:48.670 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:48.672 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:56
2025-08-03 10:13:48.672 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:56,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:48.672 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:A_SourceLightType
2025-08-03 10:13:48.672 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:56,source_light_Type:B_SourceLightType
2025-08-03 10:13:48.672 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,A_SourceLightType
2025-08-03 10:13:48.672 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：56,B_SourceLightType
2025-08-03 10:13:48.847 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;56/261,
2025-08-03 10:13:48.857 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:48.901 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:49.134 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:49.136 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_56_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:49.238 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 57
2025-08-03 10:13:49.238 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 57
2025-08-03 10:13:49.238 [Thd =42]  Info Default  开始扫描条带； [57/261]
2025-08-03 10:13:49.247 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:13:49.250 [Thd =70]  Info Default ***row:57, vectorBeginX:-72.019, vectorBeginY:33.012, captureBeginX:-70.400, captureBeginY:33.012, captureEndX:69.749, captureEndY:33.012, vectorEndX:71.651, vectorEndY:33.012
2025-08-03 10:13:49.250 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:49.251 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3997156241298,EndPoint:-69.7491655697475
2025-08-03 10:13:49.607 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:49.609 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":56,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_56_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:50.994 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:50
2025-08-03 10:13:51.016 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:51
2025-08-03 10:13:54.101 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:57
2025-08-03 10:13:54.102 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:54.102 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:54.104 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:57
2025-08-03 10:13:54.104 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:57,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:54.104 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:A_SourceLightType
2025-08-03 10:13:54.104 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:57,source_light_Type:B_SourceLightType
2025-08-03 10:13:54.104 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,A_SourceLightType
2025-08-03 10:13:54.104 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：57,B_SourceLightType
2025-08-03 10:13:54.279 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;57/261,
2025-08-03 10:13:54.289 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:54.332 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:13:54.588 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:13:54.590 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_57_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:54.669 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 58
2025-08-03 10:13:54.669 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 58
2025-08-03 10:13:54.669 [Thd =44]  Info Default  开始扫描条带； [58/261]
2025-08-03 10:13:54.678 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:13:54.681 [Thd =70]  Info Default CaptureBeginX: 70.08661, CaptureBeginY:32.58375, CaptureEndX:-70.06227, CaptureEndY:32.58375, VectorBeginX:71.65150, VectorBeginY:32.58375, VectorEndX:-72.01876, VectorEndY:32.58375, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:13:54.681 [Thd =70]  Info Default ***row:58, vectorBeginX:71.651, vectorBeginY:32.584, captureBeginX:70.087, captureBeginY:32.584, captureEndX:-70.062, captureEndY:32.584, vectorEndX:-72.019, vectorEndY:32.584
2025-08-03 10:13:54.681 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:13:54.682 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0866066962507,EndPoint:70.0622744976265
2025-08-03 10:13:55.069 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:13:55.072 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":57,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_57_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:13:55.530 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:13:55
2025-08-03 10:13:55.551 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:13:55
2025-08-03 10:13:59.527 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:58
2025-08-03 10:13:59.527 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:59.528 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:13:59.530 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:58
2025-08-03 10:13:59.530 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:58,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:13:59.530 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:A_SourceLightType
2025-08-03 10:13:59.530 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:58,source_light_Type:B_SourceLightType
2025-08-03 10:13:59.530 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,A_SourceLightType
2025-08-03 10:13:59.530 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：58,B_SourceLightType
2025-08-03 10:13:59.707 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;58/261,
2025-08-03 10:13:59.723 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:13:59.828 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:00.001 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:00.004 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_58_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:00.172 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 59
2025-08-03 10:14:00.172 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 59
2025-08-03 10:14:00.172 [Thd =56]  Info Default  开始扫描条带； [59/261]
2025-08-03 10:14:00.190 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:14:00.193 [Thd =70]  Info Default ***row:59, vectorBeginX:-72.019, vectorBeginY:32.155, captureBeginX:-70.400, captureBeginY:32.155, captureEndX:69.749, captureEndY:32.155, vectorEndX:71.652, vectorEndY:32.155
2025-08-03 10:14:00.193 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:00.195 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3996785327905,EndPoint:-69.7492026610868
2025-08-03 10:14:00.477 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:00.478 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":58,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_58_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:02.072 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:02
2025-08-03 10:14:02.092 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:02
2025-08-03 10:14:05.045 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:59
2025-08-03 10:14:05.045 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:05.046 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:05.047 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:59
2025-08-03 10:14:05.048 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:59,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:05.048 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:A_SourceLightType
2025-08-03 10:14:05.048 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:59,source_light_Type:B_SourceLightType
2025-08-03 10:14:05.048 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,A_SourceLightType
2025-08-03 10:14:05.048 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：59,B_SourceLightType
2025-08-03 10:14:05.219 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;59/261,
2025-08-03 10:14:05.228 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:05.281 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:05.505 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:05.508 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_59_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:05.627 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 60
2025-08-03 10:14:05.627 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 60
2025-08-03 10:14:05.627 [Thd =56]  Info Default  开始扫描条带； [60/261]
2025-08-03 10:14:05.636 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:14:05.639 [Thd =70]  Info Default CaptureBeginX: 70.08664, CaptureBeginY:31.72712, CaptureEndX:-70.06224, CaptureEndY:31.72712, VectorBeginX:71.65153, VectorBeginY:31.72712, VectorEndX:-72.01873, VectorEndY:31.72712, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:14:05.639 [Thd =70]  Info Default ***row:60, vectorBeginX:71.652, vectorBeginY:31.727, captureBeginX:70.087, captureBeginY:31.727, captureEndX:-70.062, captureEndY:31.727, vectorEndX:-72.019, vectorEndY:31.727
2025-08-03 10:14:05.639 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:05.641 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.08664378759,EndPoint:70.0622374062873
2025-08-03 10:14:05.980 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:05.983 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":59,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_59_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:06.105 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:06
2025-08-03 10:14:06.117 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:06
2025-08-03 10:14:10.486 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:60
2025-08-03 10:14:10.486 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:10.486 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:10.488 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:60
2025-08-03 10:14:10.488 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:60,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:10.488 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:A_SourceLightType
2025-08-03 10:14:10.488 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:60,source_light_Type:B_SourceLightType
2025-08-03 10:14:10.489 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,A_SourceLightType
2025-08-03 10:14:10.489 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：60,B_SourceLightType
2025-08-03 10:14:10.663 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;60/261,
2025-08-03 10:14:10.672 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:10.724 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:10.955 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:10.957 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_60_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:11.058 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 61
2025-08-03 10:14:11.058 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 61
2025-08-03 10:14:11.058 [Thd =55]  Info Default  开始扫描条带； [61/261]
2025-08-03 10:14:11.070 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:14:11.073 [Thd =70]  Info Default ***row:61, vectorBeginX:-72.019, vectorBeginY:31.299, captureBeginX:-70.400, captureBeginY:31.299, captureEndX:69.749, captureEndY:31.299, vectorEndX:71.652, vectorEndY:31.299
2025-08-03 10:14:11.073 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:11.075 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3996414414512,EndPoint:-69.7492397524261
2025-08-03 10:14:11.440 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:11.443 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":60,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_60_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:12.640 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:12
2025-08-03 10:14:12.653 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:12
2025-08-03 10:14:15.921 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:61
2025-08-03 10:14:15.921 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:15.921 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:15.923 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:61
2025-08-03 10:14:15.923 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:61,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:15.924 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:A_SourceLightType
2025-08-03 10:14:15.924 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:61,source_light_Type:B_SourceLightType
2025-08-03 10:14:15.924 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,A_SourceLightType
2025-08-03 10:14:15.924 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：61,B_SourceLightType
2025-08-03 10:14:16.100 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;61/261,
2025-08-03 10:14:16.109 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:16.144 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:16.412 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:16.415 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_61_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:16.489 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 62
2025-08-03 10:14:16.489 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 62
2025-08-03 10:14:16.489 [Thd =23]  Info Default  开始扫描条带； [62/261]
2025-08-03 10:14:16.498 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:14:16.501 [Thd =70]  Info Default CaptureBeginX: 70.08668, CaptureBeginY:30.87049, CaptureEndX:-70.06220, CaptureEndY:30.87049, VectorBeginX:71.65157, VectorBeginY:30.87049, VectorEndX:-72.01869, VectorEndY:30.87049, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:14:16.501 [Thd =70]  Info Default ***row:62, vectorBeginX:71.652, vectorBeginY:30.870, captureBeginX:70.087, captureBeginY:30.870, captureEndX:-70.062, captureEndY:30.870, vectorEndX:-72.019, vectorEndY:30.870
2025-08-03 10:14:16.501 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:16.503 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0866808789293,EndPoint:70.062200314948
2025-08-03 10:14:16.930 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:16.933 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":61,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_61_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:17.169 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:17
2025-08-03 10:14:17.186 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:17
2025-08-03 10:14:21.351 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:62
2025-08-03 10:14:21.351 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:21.351 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:21.354 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:62
2025-08-03 10:14:21.354 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:62,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:21.354 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:A_SourceLightType
2025-08-03 10:14:21.354 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:62,source_light_Type:B_SourceLightType
2025-08-03 10:14:21.354 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,A_SourceLightType
2025-08-03 10:14:21.354 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：62,B_SourceLightType
2025-08-03 10:14:21.528 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;62/261,
2025-08-03 10:14:21.538 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:21.591 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:21.812 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:21.819 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_62_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:21.927 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 63
2025-08-03 10:14:21.927 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 63
2025-08-03 10:14:21.927 [Thd =62]  Info Default  开始扫描条带； [63/261]
2025-08-03 10:14:21.937 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:14:21.939 [Thd =70]  Info Default ***row:63, vectorBeginX:-72.019, vectorBeginY:30.442, captureBeginX:-70.400, captureBeginY:30.442, captureEndX:69.749, captureEndY:30.442, vectorEndX:71.652, vectorEndY:30.442
2025-08-03 10:14:21.939 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:21.941 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3996043501119,EndPoint:-69.7492768437654
2025-08-03 10:14:22.297 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:22.300 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":62,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_62_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:22.709 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:22
2025-08-03 10:14:22.729 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:22
2025-08-03 10:14:26.787 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:63
2025-08-03 10:14:26.787 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:26.787 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:26.790 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:63
2025-08-03 10:14:26.790 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:63,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:26.790 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:A_SourceLightType
2025-08-03 10:14:26.790 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:63,source_light_Type:B_SourceLightType
2025-08-03 10:14:26.790 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,A_SourceLightType
2025-08-03 10:14:26.790 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：63,B_SourceLightType
2025-08-03 10:14:26.960 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;63/261,
2025-08-03 10:14:26.969 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:27.023 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:27.249 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:27.255 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_63_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:27.360 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 64
2025-08-03 10:14:27.360 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 64
2025-08-03 10:14:27.360 [Thd =44]  Info Default  开始扫描条带； [64/261]
2025-08-03 10:14:27.369 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:14:27.371 [Thd =70]  Info Default CaptureBeginX: 70.08672, CaptureBeginY:30.01387, CaptureEndX:-70.06216, CaptureEndY:30.01387, VectorBeginX:71.65161, VectorBeginY:30.01387, VectorEndX:-72.01865, VectorEndY:30.01387, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:14:27.371 [Thd =70]  Info Default ***row:64, vectorBeginX:71.652, vectorBeginY:30.014, captureBeginX:70.087, captureBeginY:30.014, captureEndX:-70.062, captureEndY:30.014, vectorEndX:-72.019, vectorEndY:30.014
2025-08-03 10:14:27.371 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:27.374 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0867179702686,EndPoint:70.0621632236087
2025-08-03 10:14:27.730 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:27.732 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":63,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_63_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:27.745 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:27
2025-08-03 10:14:27.765 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:27
2025-08-03 10:14:32.218 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:64
2025-08-03 10:14:32.218 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:32.218 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:32.220 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:64
2025-08-03 10:14:32.221 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:64,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:32.221 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:A_SourceLightType
2025-08-03 10:14:32.221 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:64,source_light_Type:B_SourceLightType
2025-08-03 10:14:32.221 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,A_SourceLightType
2025-08-03 10:14:32.221 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：64,B_SourceLightType
2025-08-03 10:14:32.397 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;64/261,
2025-08-03 10:14:32.406 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:32.464 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:32.679 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:32.685 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_64_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:32.799 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 65
2025-08-03 10:14:32.799 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 65
2025-08-03 10:14:32.799 [Thd =23]  Info Default  开始扫描条带； [65/261]
2025-08-03 10:14:32.808 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:14:32.810 [Thd =70]  Info Default ***row:65, vectorBeginX:-72.019, vectorBeginY:29.586, captureBeginX:-70.400, captureBeginY:29.586, captureEndX:69.749, captureEndY:29.586, vectorEndX:71.652, vectorEndY:29.586
2025-08-03 10:14:32.810 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:32.812 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3995672587726,EndPoint:-69.7493139351047
2025-08-03 10:14:33.155 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:33.157 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":64,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_64_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:34.956 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:34
2025-08-03 10:14:34.977 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:34
2025-08-03 10:14:37.662 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:65
2025-08-03 10:14:37.662 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:37.662 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:37.662 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:65
2025-08-03 10:14:37.662 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:65,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:37.663 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:A_SourceLightType
2025-08-03 10:14:37.663 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:65,source_light_Type:B_SourceLightType
2025-08-03 10:14:37.663 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,A_SourceLightType
2025-08-03 10:14:37.663 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：65,B_SourceLightType
2025-08-03 10:14:37.833 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;65/261,
2025-08-03 10:14:37.842 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:37.894 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:38.123 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:38.129 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_65_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:38.238 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 66
2025-08-03 10:14:38.238 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 66
2025-08-03 10:14:38.238 [Thd =68]  Info Default  开始扫描条带； [66/261]
2025-08-03 10:14:38.246 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:14:38.249 [Thd =70]  Info Default CaptureBeginX: 70.08676, CaptureBeginY:29.15724, CaptureEndX:-70.06213, CaptureEndY:29.15724, VectorBeginX:71.65165, VectorBeginY:29.15724, VectorEndX:-72.01862, VectorEndY:29.15724, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:14:38.249 [Thd =70]  Info Default ***row:66, vectorBeginX:71.652, vectorBeginY:29.157, captureBeginX:70.087, captureBeginY:29.157, captureEndX:-70.062, captureEndY:29.157, vectorEndX:-72.019, vectorEndY:29.157
2025-08-03 10:14:38.249 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:38.251 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0867550616079,EndPoint:70.0621261322694
2025-08-03 10:14:38.607 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:38.610 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":65,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_65_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:39.994 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:39
2025-08-03 10:14:40.007 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:40
2025-08-03 10:14:43.095 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:66
2025-08-03 10:14:43.096 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:43.096 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:43.097 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:66
2025-08-03 10:14:43.097 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:66,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:43.097 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:A_SourceLightType
2025-08-03 10:14:43.097 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:66,source_light_Type:B_SourceLightType
2025-08-03 10:14:43.098 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,A_SourceLightType
2025-08-03 10:14:43.098 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：66,B_SourceLightType
2025-08-03 10:14:43.278 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;66/261,
2025-08-03 10:14:43.287 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:43.351 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:43.559 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:43.561 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_66_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:43.686 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 67
2025-08-03 10:14:43.686 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 67
2025-08-03 10:14:43.686 [Thd =62]  Info Default  开始扫描条带； [67/261]
2025-08-03 10:14:43.696 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:14:43.698 [Thd =70]  Info Default ***row:67, vectorBeginX:-72.019, vectorBeginY:28.729, captureBeginX:-70.400, captureBeginY:28.729, captureEndX:69.749, captureEndY:28.729, vectorEndX:71.652, vectorEndY:28.729
2025-08-03 10:14:43.698 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:43.701 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3995301674333,EndPoint:-69.7493510264439
2025-08-03 10:14:44.029 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:44.031 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":66,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_66_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:45.525 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:45
2025-08-03 10:14:45.539 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:45
2025-08-03 10:14:48.547 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:67
2025-08-03 10:14:48.547 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:48.548 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:48.549 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:67
2025-08-03 10:14:48.549 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:67,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:48.550 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:A_SourceLightType
2025-08-03 10:14:48.550 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:67,source_light_Type:B_SourceLightType
2025-08-03 10:14:48.550 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,A_SourceLightType
2025-08-03 10:14:48.550 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：67,B_SourceLightType
2025-08-03 10:14:48.719 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;67/261,
2025-08-03 10:14:48.729 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:48.854 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:49.009 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:49.012 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_67_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:49.187 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 68
2025-08-03 10:14:49.187 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 68
2025-08-03 10:14:49.187 [Thd =47]  Info Default  开始扫描条带； [68/261]
2025-08-03 10:14:49.196 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:14:49.199 [Thd =70]  Info Default CaptureBeginX: 70.08679, CaptureBeginY:28.30062, CaptureEndX:-70.06209, CaptureEndY:28.30062, VectorBeginX:71.65168, VectorBeginY:28.30062, VectorEndX:-72.01858, VectorEndY:28.30062, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:14:49.199 [Thd =70]  Info Default ***row:68, vectorBeginX:71.652, vectorBeginY:28.301, captureBeginX:70.087, captureBeginY:28.301, captureEndX:-70.062, captureEndY:28.301, vectorEndX:-72.019, vectorEndY:28.301
2025-08-03 10:14:49.199 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:49.200 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0867921529472,EndPoint:70.0620890409301
2025-08-03 10:14:49.482 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:49.485 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":67,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_67_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:49.553 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:49
2025-08-03 10:14:49.575 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:49
2025-08-03 10:14:54.045 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:68
2025-08-03 10:14:54.045 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:54.045 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:54.047 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:68
2025-08-03 10:14:54.047 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:68,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:54.047 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:A_SourceLightType
2025-08-03 10:14:54.047 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:68,source_light_Type:B_SourceLightType
2025-08-03 10:14:54.048 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,A_SourceLightType
2025-08-03 10:14:54.048 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：68,B_SourceLightType
2025-08-03 10:14:54.217 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;68/261,
2025-08-03 10:14:54.228 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:54.278 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:54.506 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:54.509 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_68_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:54.612 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 69
2025-08-03 10:14:54.612 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 69
2025-08-03 10:14:54.612 [Thd =64]  Info Default  开始扫描条带； [69/261]
2025-08-03 10:14:54.621 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:14:54.624 [Thd =70]  Info Default ***row:69, vectorBeginX:-72.019, vectorBeginY:27.872, captureBeginX:-70.399, captureBeginY:27.872, captureEndX:69.749, captureEndY:27.872, vectorEndX:71.652, vectorEndY:27.872
2025-08-03 10:14:54.624 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:14:54.626 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.399493076094,EndPoint:-69.7493881177832
2025-08-03 10:14:54.981 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:14:54.983 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":68,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_68_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:14:56.095 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:14:56
2025-08-03 10:14:56.109 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:14:56
2025-08-03 10:14:59.473 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:69
2025-08-03 10:14:59.474 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:59.474 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:14:59.476 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:69
2025-08-03 10:14:59.476 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:69,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:14:59.476 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:A_SourceLightType
2025-08-03 10:14:59.476 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:69,source_light_Type:B_SourceLightType
2025-08-03 10:14:59.476 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,A_SourceLightType
2025-08-03 10:14:59.476 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：69,B_SourceLightType
2025-08-03 10:14:59.652 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;69/261,
2025-08-03 10:14:59.661 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:14:59.714 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:14:59.936 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:14:59.938 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_69_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:00.053 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 70
2025-08-03 10:15:00.053 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 70
2025-08-03 10:15:00.053 [Thd =58]  Info Default  开始扫描条带； [70/261]
2025-08-03 10:15:00.062 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:15:00.065 [Thd =70]  Info Default CaptureBeginX: 70.08683, CaptureBeginY:27.44399, CaptureEndX:-70.06205, CaptureEndY:27.44399, VectorBeginX:71.65172, VectorBeginY:27.44399, VectorEndX:-72.01854, VectorEndY:27.44399, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:15:00.065 [Thd =70]  Info Default ***row:70, vectorBeginX:71.652, vectorBeginY:27.444, captureBeginX:70.087, captureBeginY:27.444, captureEndX:-70.062, captureEndY:27.444, vectorEndX:-72.019, vectorEndY:27.444
2025-08-03 10:15:00.065 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:00.066 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0868292442864,EndPoint:70.0620519495908
2025-08-03 10:15:00.409 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:00.412 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":69,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_69_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:01.125 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:01
2025-08-03 10:15:01.144 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:01
2025-08-03 10:15:04.912 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:70
2025-08-03 10:15:04.912 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:04.912 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:04.914 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:70
2025-08-03 10:15:04.914 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:70,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:04.914 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:A_SourceLightType
2025-08-03 10:15:04.914 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:70,source_light_Type:B_SourceLightType
2025-08-03 10:15:04.914 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,A_SourceLightType
2025-08-03 10:15:04.914 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：70,B_SourceLightType
2025-08-03 10:15:05.095 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;70/261,
2025-08-03 10:15:05.104 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:05.154 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:05.377 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:05.380 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_70_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:05.499 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 71
2025-08-03 10:15:05.499 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 71
2025-08-03 10:15:05.499 [Thd =58]  Info Default  开始扫描条带； [71/261]
2025-08-03 10:15:05.510 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:15:05.513 [Thd =70]  Info Default ***row:71, vectorBeginX:-72.019, vectorBeginY:27.016, captureBeginX:-70.399, captureBeginY:27.016, captureEndX:69.749, captureEndY:27.016, vectorEndX:71.652, vectorEndY:27.016
2025-08-03 10:15:05.513 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:05.515 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3994559847547,EndPoint:-69.7494252091225
2025-08-03 10:15:05.856 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:05.858 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":70,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_70_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:07.164 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:07
2025-08-03 10:15:07.176 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:07
2025-08-03 10:15:10.361 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:71
2025-08-03 10:15:10.362 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:10.362 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:10.364 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:71
2025-08-03 10:15:10.364 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:71,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:10.364 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:A_SourceLightType
2025-08-03 10:15:10.364 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:71,source_light_Type:B_SourceLightType
2025-08-03 10:15:10.364 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,A_SourceLightType
2025-08-03 10:15:10.364 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：71,B_SourceLightType
2025-08-03 10:15:10.537 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;71/261,
2025-08-03 10:15:10.547 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:10.598 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:10.688 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:10
2025-08-03 10:15:10.698 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:10
2025-08-03 10:15:10.835 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:10.837 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_71_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:10.935 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 72
2025-08-03 10:15:10.935 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 72
2025-08-03 10:15:10.935 [Thd =47]  Info Default  开始扫描条带； [72/261]
2025-08-03 10:15:10.944 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:15:10.947 [Thd =70]  Info Default CaptureBeginX: 70.08687, CaptureBeginY:26.58737, CaptureEndX:-70.06201, CaptureEndY:26.58737, VectorBeginX:71.65176, VectorBeginY:26.58737, VectorEndX:-72.01850, VectorEndY:26.58737, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:15:10.947 [Thd =70]  Info Default ***row:72, vectorBeginX:71.652, vectorBeginY:26.587, captureBeginX:70.087, captureBeginY:26.587, captureEndX:-70.062, captureEndY:26.587, vectorEndX:-72.019, vectorEndY:26.587
2025-08-03 10:15:10.947 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:10.949 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0868663356257,EndPoint:70.0620148582515
2025-08-03 10:15:11.310 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:11.313 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":71,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_71_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:15.796 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:72
2025-08-03 10:15:15.796 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:15.796 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:15.798 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:72
2025-08-03 10:15:15.798 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:72,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:15.798 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:A_SourceLightType
2025-08-03 10:15:15.798 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:72,source_light_Type:B_SourceLightType
2025-08-03 10:15:15.798 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,A_SourceLightType
2025-08-03 10:15:15.798 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：72,B_SourceLightType
2025-08-03 10:15:15.969 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;72/261,
2025-08-03 10:15:15.978 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:16.037 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:16.257 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:16.260 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_72_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:16.372 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 73
2025-08-03 10:15:16.372 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 73
2025-08-03 10:15:16.372 [Thd =55]  Info Default  开始扫描条带； [73/261]
2025-08-03 10:15:16.381 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:15:16.384 [Thd =70]  Info Default ***row:73, vectorBeginX:-72.018, vectorBeginY:26.159, captureBeginX:-70.399, captureBeginY:26.159, captureEndX:69.749, captureEndY:26.159, vectorEndX:71.652, vectorEndY:26.159
2025-08-03 10:15:16.384 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:16.386 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3994188934154,EndPoint:-69.7494623004618
2025-08-03 10:15:16.735 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:16.738 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":72,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_72_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:18.223 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:18
2025-08-03 10:15:18.236 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:18
2025-08-03 10:15:21.233 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:73
2025-08-03 10:15:21.233 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:21.233 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:21.235 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:73
2025-08-03 10:15:21.235 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:73,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:21.235 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:A_SourceLightType
2025-08-03 10:15:21.235 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:73,source_light_Type:B_SourceLightType
2025-08-03 10:15:21.235 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,A_SourceLightType
2025-08-03 10:15:21.235 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：73,B_SourceLightType
2025-08-03 10:15:21.412 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;73/261,
2025-08-03 10:15:21.422 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:21.465 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:21.691 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:21.695 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_73_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:21.804 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 74
2025-08-03 10:15:21.804 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 74
2025-08-03 10:15:21.804 [Thd =58]  Info Default  开始扫描条带； [74/261]
2025-08-03 10:15:21.813 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:15:21.816 [Thd =70]  Info Default CaptureBeginX: 70.08690, CaptureBeginY:25.73074, CaptureEndX:-70.06198, CaptureEndY:25.73074, VectorBeginX:71.65179, VectorBeginY:25.73074, VectorEndX:-72.01847, VectorEndY:25.73074, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:15:21.816 [Thd =70]  Info Default ***row:74, vectorBeginX:71.652, vectorBeginY:25.731, captureBeginX:70.087, captureBeginY:25.731, captureEndX:-70.062, captureEndY:25.731, vectorEndX:-72.018, vectorEndY:25.731
2025-08-03 10:15:21.816 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:21.820 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.086903426965,EndPoint:70.0619777669122
2025-08-03 10:15:22.167 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:22.169 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":73,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_73_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:22.751 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:22
2025-08-03 10:15:22.763 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:22
2025-08-03 10:15:26.669 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:74
2025-08-03 10:15:26.670 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:26.670 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:26.672 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:74
2025-08-03 10:15:26.672 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:74,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:26.672 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:A_SourceLightType
2025-08-03 10:15:26.672 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:74,source_light_Type:B_SourceLightType
2025-08-03 10:15:26.672 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,A_SourceLightType
2025-08-03 10:15:26.672 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：74,B_SourceLightType
2025-08-03 10:15:26.849 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;74/261,
2025-08-03 10:15:26.858 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:26.914 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:27.132 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:27.134 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_74_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:27.252 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 75
2025-08-03 10:15:27.252 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 75
2025-08-03 10:15:27.252 [Thd =64]  Info Default  开始扫描条带； [75/261]
2025-08-03 10:15:27.261 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:15:27.264 [Thd =70]  Info Default ***row:75, vectorBeginX:-72.018, vectorBeginY:25.302, captureBeginX:-70.399, captureBeginY:25.302, captureEndX:69.749, captureEndY:25.302, vectorEndX:71.652, vectorEndY:25.302
2025-08-03 10:15:27.264 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:27.266 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3993818020761,EndPoint:-69.7494993918011
2025-08-03 10:15:27.613 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:27.616 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":74,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_74_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:29.284 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:29
2025-08-03 10:15:29.299 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:29
2025-08-03 10:15:32.113 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:75
2025-08-03 10:15:32.114 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:32.114 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:32.114 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:75
2025-08-03 10:15:32.114 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:75,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:32.114 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:A_SourceLightType
2025-08-03 10:15:32.114 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:75,source_light_Type:B_SourceLightType
2025-08-03 10:15:32.114 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,A_SourceLightType
2025-08-03 10:15:32.115 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：75,B_SourceLightType
2025-08-03 10:15:32.291 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;75/261,
2025-08-03 10:15:32.300 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:32.354 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:32.574 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:32.580 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_75_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:32.702 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 76
2025-08-03 10:15:32.702 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 76
2025-08-03 10:15:32.702 [Thd =68]  Info Default  开始扫描条带； [76/261]
2025-08-03 10:15:32.711 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:15:32.714 [Thd =70]  Info Default CaptureBeginX: 70.08694, CaptureBeginY:24.87412, CaptureEndX:-70.06194, CaptureEndY:24.87412, VectorBeginX:71.65183, VectorBeginY:24.87412, VectorEndX:-72.01843, VectorEndY:24.87412, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:15:32.714 [Thd =70]  Info Default ***row:76, vectorBeginX:71.652, vectorBeginY:24.874, captureBeginX:70.087, captureBeginY:24.874, captureEndX:-70.062, captureEndY:24.874, vectorEndX:-72.018, vectorEndY:24.874
2025-08-03 10:15:32.714 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:32.716 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0869405183043,EndPoint:70.0619406755729
2025-08-03 10:15:33.068 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:33.071 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":75,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_75_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:33.313 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:33
2025-08-03 10:15:33.326 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:33
2025-08-03 10:15:37.560 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:76
2025-08-03 10:15:37.561 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:37.561 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:37.563 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:76
2025-08-03 10:15:37.563 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:76,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:37.563 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:A_SourceLightType
2025-08-03 10:15:37.563 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,A_SourceLightType
2025-08-03 10:15:37.564 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：76,B_SourceLightType
2025-08-03 10:15:37.564 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:76,source_light_Type:B_SourceLightType
2025-08-03 10:15:37.739 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;76/261,
2025-08-03 10:15:37.748 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:37.797 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:38.022 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:38.027 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_76_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:38.142 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 77
2025-08-03 10:15:38.142 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 77
2025-08-03 10:15:38.142 [Thd =23]  Info Default  开始扫描条带； [77/261]
2025-08-03 10:15:38.151 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:15:38.154 [Thd =70]  Info Default ***row:77, vectorBeginX:-72.018, vectorBeginY:24.446, captureBeginX:-70.399, captureBeginY:24.446, captureEndX:69.750, captureEndY:24.446, vectorEndX:71.652, vectorEndY:24.446
2025-08-03 10:15:38.154 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:38.155 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3993447107368,EndPoint:-69.7495364831404
2025-08-03 10:15:38.497 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:38.499 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":76,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_76_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:39.848 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:39
2025-08-03 10:15:39.864 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:39
2025-08-03 10:15:43.003 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:77
2025-08-03 10:15:43.003 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:43.003 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:43.005 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:77
2025-08-03 10:15:43.005 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:77,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:43.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:A_SourceLightType
2025-08-03 10:15:43.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:77,source_light_Type:B_SourceLightType
2025-08-03 10:15:43.005 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,A_SourceLightType
2025-08-03 10:15:43.005 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：77,B_SourceLightType
2025-08-03 10:15:43.183 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;77/261,
2025-08-03 10:15:43.192 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:43.248 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:43.468 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:43.471 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_77_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:43.583 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 78
2025-08-03 10:15:43.583 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 78
2025-08-03 10:15:43.583 [Thd =58]  Info Default  开始扫描条带； [78/261]
2025-08-03 10:15:43.592 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:15:43.595 [Thd =70]  Info Default CaptureBeginX: 70.08698, CaptureBeginY:24.01749, CaptureEndX:-70.06190, CaptureEndY:24.01749, VectorBeginX:71.65187, VectorBeginY:24.01749, VectorEndX:-72.01839, VectorEndY:24.01749, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:15:43.595 [Thd =70]  Info Default ***row:78, vectorBeginX:71.652, vectorBeginY:24.017, captureBeginX:70.087, captureBeginY:24.017, captureEndX:-70.062, captureEndY:24.017, vectorEndX:-72.018, vectorEndY:24.017
2025-08-03 10:15:43.595 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:43.597 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0869776096436,EndPoint:70.0619035842336
2025-08-03 10:15:43.950 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:43.952 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":77,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_77_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:44.441 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:44
2025-08-03 10:15:44.460 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:44
2025-08-03 10:15:48.441 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:78
2025-08-03 10:15:48.441 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:48.441 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:48.443 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:78
2025-08-03 10:15:48.443 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:78,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:48.444 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:A_SourceLightType
2025-08-03 10:15:48.444 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:78,source_light_Type:B_SourceLightType
2025-08-03 10:15:48.444 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,A_SourceLightType
2025-08-03 10:15:48.444 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：78,B_SourceLightType
2025-08-03 10:15:48.616 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;78/261,
2025-08-03 10:15:48.626 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:48.669 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:48.904 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:48.907 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_78_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:49.016 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 79
2025-08-03 10:15:49.016 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 79
2025-08-03 10:15:49.016 [Thd =68]  Info Default  开始扫描条带； [79/261]
2025-08-03 10:15:49.025 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:15:49.027 [Thd =70]  Info Default ***row:79, vectorBeginX:-72.018, vectorBeginY:23.589, captureBeginX:-70.399, captureBeginY:23.589, captureEndX:69.750, captureEndY:23.589, vectorEndX:71.652, vectorEndY:23.589
2025-08-03 10:15:49.028 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:49.030 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3993076193975,EndPoint:-69.7495735744797
2025-08-03 10:15:49.376 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:49.380 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":78,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_78_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:50.481 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:50
2025-08-03 10:15:50.494 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:50
2025-08-03 10:15:53.877 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:79
2025-08-03 10:15:53.877 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:53.877 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:53.879 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:79
2025-08-03 10:15:53.879 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:79,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:53.879 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:A_SourceLightType
2025-08-03 10:15:53.879 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:79,source_light_Type:B_SourceLightType
2025-08-03 10:15:53.879 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,A_SourceLightType
2025-08-03 10:15:53.879 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：79,B_SourceLightType
2025-08-03 10:15:54.050 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;79/261,
2025-08-03 10:15:54.059 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:54.107 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:54.339 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:54.342 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_79_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:54.451 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 80
2025-08-03 10:15:54.451 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 80
2025-08-03 10:15:54.451 [Thd =69]  Info Default  开始扫描条带； [80/261]
2025-08-03 10:15:54.460 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:15:54.463 [Thd =70]  Info Default CaptureBeginX: 70.08701, CaptureBeginY:23.16087, CaptureEndX:-70.06187, CaptureEndY:23.16087, VectorBeginX:71.65190, VectorBeginY:23.16087, VectorEndX:-72.01836, VectorEndY:23.16087, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:15:54.463 [Thd =70]  Info Default ***row:80, vectorBeginX:71.652, vectorBeginY:23.161, captureBeginX:70.087, captureBeginY:23.161, captureEndX:-70.062, captureEndY:23.161, vectorEndX:-72.018, vectorEndY:23.161
2025-08-03 10:15:54.463 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:54.465 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0870147009829,EndPoint:70.0618664928943
2025-08-03 10:15:54.509 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:15:54
2025-08-03 10:15:54.519 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:15:54
2025-08-03 10:15:54.814 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:15:54.816 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":79,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_79_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:59.309 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:80
2025-08-03 10:15:59.309 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:59.309 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:15:59.312 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:80
2025-08-03 10:15:59.312 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:80,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:15:59.312 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:A_SourceLightType
2025-08-03 10:15:59.312 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,A_SourceLightType
2025-08-03 10:15:59.312 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：80,B_SourceLightType
2025-08-03 10:15:59.312 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:80,source_light_Type:B_SourceLightType
2025-08-03 10:15:59.480 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;80/261,
2025-08-03 10:15:59.489 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:15:59.538 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:15:59.770 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:15:59.773 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_80_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:15:59.876 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 81
2025-08-03 10:15:59.876 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 81
2025-08-03 10:15:59.876 [Thd =5]  Info Default  开始扫描条带； [81/261]
2025-08-03 10:15:59.885 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:15:59.888 [Thd =70]  Info Default ***row:81, vectorBeginX:-72.018, vectorBeginY:22.733, captureBeginX:-70.399, captureBeginY:22.733, captureEndX:69.750, captureEndY:22.733, vectorEndX:71.652, vectorEndY:22.733
2025-08-03 10:15:59.888 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:15:59.890 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3992705280582,EndPoint:-69.749610665819
2025-08-03 10:16:00.247 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:00.250 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":80,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_80_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:01.041 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:01
2025-08-03 10:16:01.051 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:01
2025-08-03 10:16:04.736 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:81
2025-08-03 10:16:04.736 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:04.737 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:04.739 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:81
2025-08-03 10:16:04.739 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:81,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:04.739 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:A_SourceLightType
2025-08-03 10:16:04.739 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:81,source_light_Type:B_SourceLightType
2025-08-03 10:16:04.739 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,A_SourceLightType
2025-08-03 10:16:04.740 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：81,B_SourceLightType
2025-08-03 10:16:04.912 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;81/261,
2025-08-03 10:16:04.921 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:04.974 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:05.196 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:05.198 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_81_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:05.307 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 82
2025-08-03 10:16:05.307 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 82
2025-08-03 10:16:05.307 [Thd =55]  Info Default  开始扫描条带； [82/261]
2025-08-03 10:16:05.316 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:16:05.319 [Thd =70]  Info Default CaptureBeginX: 70.08705, CaptureBeginY:22.30424, CaptureEndX:-70.06183, CaptureEndY:22.30424, VectorBeginX:71.65194, VectorBeginY:22.30424, VectorEndX:-72.01832, VectorEndY:22.30424, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:16:05.319 [Thd =70]  Info Default ***row:82, vectorBeginX:71.652, vectorBeginY:22.304, captureBeginX:70.087, captureBeginY:22.304, captureEndX:-70.062, captureEndY:22.304, vectorEndX:-72.018, vectorEndY:22.304
2025-08-03 10:16:05.319 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:05.321 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0870517923222,EndPoint:70.061829401555
2025-08-03 10:16:05.669 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:05.671 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":81,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_81_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:06.569 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:06
2025-08-03 10:16:06.582 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:06
2025-08-03 10:16:10.167 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:82
2025-08-03 10:16:10.167 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:10.167 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:10.169 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:82
2025-08-03 10:16:10.169 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:82,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:10.170 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:A_SourceLightType
2025-08-03 10:16:10.170 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:82,source_light_Type:B_SourceLightType
2025-08-03 10:16:10.170 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,A_SourceLightType
2025-08-03 10:16:10.170 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：82,B_SourceLightType
2025-08-03 10:16:10.345 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;82/261,
2025-08-03 10:16:10.354 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:10.409 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:10.627 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:10.629 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_82_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:10.750 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 83
2025-08-03 10:16:10.750 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 83
2025-08-03 10:16:10.750 [Thd =42]  Info Default  开始扫描条带； [83/261]
2025-08-03 10:16:10.759 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:16:10.762 [Thd =70]  Info Default ***row:83, vectorBeginX:-72.018, vectorBeginY:21.876, captureBeginX:-70.399, captureBeginY:21.876, captureEndX:69.750, captureEndY:21.876, vectorEndX:71.652, vectorEndY:21.876
2025-08-03 10:16:10.762 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:10.764 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3992334367189,EndPoint:-69.7496477571583
2025-08-03 10:16:11.098 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:11.100 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":82,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_82_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:12.605 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:12
2025-08-03 10:16:12.617 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:12
2025-08-03 10:16:15.611 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:83
2025-08-03 10:16:15.611 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:15.611 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:15.613 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:83
2025-08-03 10:16:15.613 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:83,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:15.613 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:A_SourceLightType
2025-08-03 10:16:15.613 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:83,source_light_Type:B_SourceLightType
2025-08-03 10:16:15.613 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,A_SourceLightType
2025-08-03 10:16:15.613 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：83,B_SourceLightType
2025-08-03 10:16:15.784 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;83/261,
2025-08-03 10:16:15.793 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:15.841 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:16.073 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:16.079 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_83_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:16.180 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 84
2025-08-03 10:16:16.180 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 84
2025-08-03 10:16:16.180 [Thd =62]  Info Default  开始扫描条带； [84/261]
2025-08-03 10:16:16.189 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:16:16.192 [Thd =70]  Info Default CaptureBeginX: 70.08709, CaptureBeginY:21.44761, CaptureEndX:-70.06179, CaptureEndY:21.44761, VectorBeginX:71.65198, VectorBeginY:21.44761, VectorEndX:-72.01828, VectorEndY:21.44761, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:16:16.192 [Thd =70]  Info Default ***row:84, vectorBeginX:71.652, vectorBeginY:21.448, captureBeginX:70.087, captureBeginY:21.448, captureEndX:-70.062, captureEndY:21.448, vectorEndX:-72.018, vectorEndY:21.448
2025-08-03 10:16:16.192 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:16.193 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0870888836615,EndPoint:70.0617923102157
2025-08-03 10:16:16.555 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:16.557 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":83,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_83_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:16.632 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:16
2025-08-03 10:16:16.644 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:16
2025-08-03 10:16:21.039 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:84
2025-08-03 10:16:21.039 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:21.040 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:21.042 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:84
2025-08-03 10:16:21.042 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:84,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:21.042 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:A_SourceLightType
2025-08-03 10:16:21.042 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:84,source_light_Type:B_SourceLightType
2025-08-03 10:16:21.042 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,A_SourceLightType
2025-08-03 10:16:21.042 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：84,B_SourceLightType
2025-08-03 10:16:21.216 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;84/261,
2025-08-03 10:16:21.226 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:21.282 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:21.504 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:21.506 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_84_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:21.632 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 85
2025-08-03 10:16:21.632 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 85
2025-08-03 10:16:21.632 [Thd =23]  Info Default  开始扫描条带； [85/261]
2025-08-03 10:16:21.643 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:16:21.646 [Thd =70]  Info Default ***row:85, vectorBeginX:-72.018, vectorBeginY:21.019, captureBeginX:-70.399, captureBeginY:21.019, captureEndX:69.750, captureEndY:21.019, vectorEndX:71.652, vectorEndY:21.019
2025-08-03 10:16:21.646 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:21.648 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3991963453796,EndPoint:-69.7496848484976
2025-08-03 10:16:21.984 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:21.986 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":84,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_84_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:23.165 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:23
2025-08-03 10:16:23.177 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:23
2025-08-03 10:16:26.494 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:85
2025-08-03 10:16:26.494 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:26.494 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:26.496 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:85
2025-08-03 10:16:26.496 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:85,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:26.497 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:A_SourceLightType
2025-08-03 10:16:26.497 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:85,source_light_Type:B_SourceLightType
2025-08-03 10:16:26.497 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,A_SourceLightType
2025-08-03 10:16:26.497 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：85,B_SourceLightType
2025-08-03 10:16:26.667 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;85/261,
2025-08-03 10:16:26.676 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:26.718 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:26.955 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:26.957 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_85_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:27.052 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 86
2025-08-03 10:16:27.052 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 86
2025-08-03 10:16:27.052 [Thd =62]  Info Default  开始扫描条带； [86/261]
2025-08-03 10:16:27.061 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:16:27.064 [Thd =70]  Info Default CaptureBeginX: 70.08713, CaptureBeginY:20.59099, CaptureEndX:-70.06176, CaptureEndY:20.59099, VectorBeginX:71.65202, VectorBeginY:20.59099, VectorEndX:-72.01824, VectorEndY:20.59099, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:16:27.064 [Thd =70]  Info Default ***row:86, vectorBeginX:71.652, vectorBeginY:20.591, captureBeginX:70.087, captureBeginY:20.591, captureEndX:-70.062, captureEndY:20.591, vectorEndX:-72.018, vectorEndY:20.591
2025-08-03 10:16:27.064 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:27.065 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0871259750008,EndPoint:70.0617552188764
2025-08-03 10:16:27.429 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:27.432 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":85,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_85_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:28.194 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:28
2025-08-03 10:16:28.207 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:28
2025-08-03 10:16:31.910 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:86
2025-08-03 10:16:31.910 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:31.911 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:31.913 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:86
2025-08-03 10:16:31.913 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:86,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:31.913 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:A_SourceLightType
2025-08-03 10:16:31.913 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:86,source_light_Type:B_SourceLightType
2025-08-03 10:16:31.913 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,A_SourceLightType
2025-08-03 10:16:31.913 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：86,B_SourceLightType
2025-08-03 10:16:32.090 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;86/261,
2025-08-03 10:16:32.099 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:32.145 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:32.375 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:32.377 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_86_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:32.481 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 87
2025-08-03 10:16:32.481 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 87
2025-08-03 10:16:32.481 [Thd =58]  Info Default  开始扫描条带； [87/261]
2025-08-03 10:16:32.490 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:16:32.493 [Thd =70]  Info Default ***row:87, vectorBeginX:-72.018, vectorBeginY:20.163, captureBeginX:-70.399, captureBeginY:20.163, captureEndX:69.750, captureEndY:20.163, vectorEndX:71.652, vectorEndY:20.163
2025-08-03 10:16:32.493 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:32.495 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3991592540403,EndPoint:-69.7497219398369
2025-08-03 10:16:32.854 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:32.857 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":86,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_86_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:34.228 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:34
2025-08-03 10:16:34.240 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:34
2025-08-03 10:16:37.344 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:87
2025-08-03 10:16:37.344 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:37.345 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:37.347 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:87
2025-08-03 10:16:37.347 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:87,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:37.347 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:A_SourceLightType
2025-08-03 10:16:37.347 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:87,source_light_Type:B_SourceLightType
2025-08-03 10:16:37.347 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,A_SourceLightType
2025-08-03 10:16:37.347 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：87,B_SourceLightType
2025-08-03 10:16:37.518 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;87/261,
2025-08-03 10:16:37.528 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:37.580 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:37.804 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:37.807 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_87_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:37.913 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 88
2025-08-03 10:16:37.913 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 88
2025-08-03 10:16:37.913 [Thd =69]  Info Default  开始扫描条带； [88/261]
2025-08-03 10:16:37.925 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:16:37.927 [Thd =70]  Info Default CaptureBeginX: 70.08716, CaptureBeginY:19.73436, CaptureEndX:-70.06172, CaptureEndY:19.73436, VectorBeginX:71.65205, VectorBeginY:19.73436, VectorEndX:-72.01821, VectorEndY:19.73436, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:16:37.927 [Thd =70]  Info Default ***row:88, vectorBeginX:71.652, vectorBeginY:19.734, captureBeginX:70.087, captureBeginY:19.734, captureEndX:-70.062, captureEndY:19.734, vectorEndX:-72.018, vectorEndY:19.734
2025-08-03 10:16:37.928 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:37.929 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0871630663401,EndPoint:70.0617181275371
2025-08-03 10:16:38.253 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:38
2025-08-03 10:16:38.265 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:38
2025-08-03 10:16:38.284 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:38.287 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":87,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_87_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:42.775 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:88
2025-08-03 10:16:42.775 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:42.775 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:42.776 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:88
2025-08-03 10:16:42.776 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:88,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:42.776 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:A_SourceLightType
2025-08-03 10:16:42.776 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:88,source_light_Type:B_SourceLightType
2025-08-03 10:16:42.777 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,A_SourceLightType
2025-08-03 10:16:42.777 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：88,B_SourceLightType
2025-08-03 10:16:42.952 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;88/261,
2025-08-03 10:16:42.962 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:43.008 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:43.249 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:43.251 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_88_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:43.355 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 89
2025-08-03 10:16:43.355 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 89
2025-08-03 10:16:43.355 [Thd =69]  Info Default  开始扫描条带； [89/261]
2025-08-03 10:16:43.365 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:16:43.368 [Thd =70]  Info Default ***row:89, vectorBeginX:-72.018, vectorBeginY:19.306, captureBeginX:-70.399, captureBeginY:19.306, captureEndX:69.750, captureEndY:19.306, vectorEndX:71.652, vectorEndY:19.306
2025-08-03 10:16:43.368 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:43.370 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.399122162701,EndPoint:-69.7497590311762
2025-08-03 10:16:43.721 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:43.723 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":88,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_88_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:44.786 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:44
2025-08-03 10:16:44.798 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:44
2025-08-03 10:16:48.217 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:89
2025-08-03 10:16:48.217 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:48.217 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:48.219 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:89
2025-08-03 10:16:48.219 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:89,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:48.219 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:A_SourceLightType
2025-08-03 10:16:48.219 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:89,source_light_Type:B_SourceLightType
2025-08-03 10:16:48.219 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,A_SourceLightType
2025-08-03 10:16:48.219 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：89,B_SourceLightType
2025-08-03 10:16:48.395 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;89/261,
2025-08-03 10:16:48.404 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:48.456 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:48.687 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:48.690 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_89_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:48.796 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 90
2025-08-03 10:16:48.796 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 90
2025-08-03 10:16:48.796 [Thd =51]  Info Default  开始扫描条带； [90/261]
2025-08-03 10:16:48.805 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:16:48.807 [Thd =70]  Info Default CaptureBeginX: 70.08720, CaptureBeginY:18.87774, CaptureEndX:-70.06168, CaptureEndY:18.87774, VectorBeginX:71.65209, VectorBeginY:18.87774, VectorEndX:-72.01817, VectorEndY:18.87774, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:16:48.808 [Thd =70]  Info Default ***row:90, vectorBeginX:71.652, vectorBeginY:18.878, captureBeginX:70.087, captureBeginY:18.878, captureEndX:-70.062, captureEndY:18.878, vectorEndX:-72.018, vectorEndY:18.878
2025-08-03 10:16:48.808 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:48.809 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0872001576794,EndPoint:70.0616810361978
2025-08-03 10:16:49.167 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:49.169 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":89,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_89_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:49.817 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:49
2025-08-03 10:16:49.830 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:49
2025-08-03 10:16:53.656 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:90
2025-08-03 10:16:53.656 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:53.656 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:53.754 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:90
2025-08-03 10:16:53.754 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:90,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:53.754 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:B_SourceLightType
2025-08-03 10:16:53.755 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,B_SourceLightType
2025-08-03 10:16:53.755 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：90,A_SourceLightType
2025-08-03 10:16:53.755 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:90,source_light_Type:A_SourceLightType
2025-08-03 10:16:53.833 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;90/261,
2025-08-03 10:16:53.842 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:53.898 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:54.222 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:16:54.224 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_90_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:54.244 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 91
2025-08-03 10:16:54.244 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 91
2025-08-03 10:16:54.244 [Thd =5]  Info Default  开始扫描条带； [91/261]
2025-08-03 10:16:54.253 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:16:54.256 [Thd =70]  Info Default ***row:91, vectorBeginX:-72.018, vectorBeginY:18.449, captureBeginX:-70.399, captureBeginY:18.449, captureEndX:69.750, captureEndY:18.449, vectorEndX:71.652, vectorEndY:18.449
2025-08-03 10:16:54.256 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:54.258 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3990850713618,EndPoint:-69.7497961225155
2025-08-03 10:16:54.704 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:54.707 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":90,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_90_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:54.847 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:16:54
2025-08-03 10:16:54.861 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:16:54
2025-08-03 10:16:59.105 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:91
2025-08-03 10:16:59.105 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:59.105 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:16:59.107 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:91
2025-08-03 10:16:59.107 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:91,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:16:59.107 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:A_SourceLightType
2025-08-03 10:16:59.107 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:91,source_light_Type:B_SourceLightType
2025-08-03 10:16:59.107 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,A_SourceLightType
2025-08-03 10:16:59.107 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：91,B_SourceLightType
2025-08-03 10:16:59.283 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;91/261,
2025-08-03 10:16:59.293 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:16:59.360 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:16:59.566 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:16:59.569 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_91_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:16:59.707 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 92
2025-08-03 10:16:59.707 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 92
2025-08-03 10:16:59.707 [Thd =35]  Info Default  开始扫描条带； [92/261]
2025-08-03 10:16:59.716 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:16:59.719 [Thd =70]  Info Default CaptureBeginX: 70.08724, CaptureBeginY:18.02111, CaptureEndX:-70.06164, CaptureEndY:18.02111, VectorBeginX:71.65213, VectorBeginY:18.02111, VectorEndX:-72.01813, VectorEndY:18.02111, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:16:59.719 [Thd =70]  Info Default ***row:92, vectorBeginX:71.652, vectorBeginY:18.021, captureBeginX:70.087, captureBeginY:18.021, captureEndX:-70.062, captureEndY:18.021, vectorEndX:-72.018, vectorEndY:18.021
2025-08-03 10:16:59.719 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:16:59.721 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0872372490187,EndPoint:70.0616439448585
2025-08-03 10:17:00.039 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:00.042 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":91,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_91_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:00.380 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:00
2025-08-03 10:17:00.391 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:00
2025-08-03 10:17:04.568 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:92
2025-08-03 10:17:04.568 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:04.568 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:04.571 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:92
2025-08-03 10:17:04.571 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:92,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:04.571 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:A_SourceLightType
2025-08-03 10:17:04.571 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:92,source_light_Type:B_SourceLightType
2025-08-03 10:17:04.572 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,A_SourceLightType
2025-08-03 10:17:04.572 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：92,B_SourceLightType
2025-08-03 10:17:04.740 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;92/261,
2025-08-03 10:17:04.750 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:04.818 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:05.031 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:05.034 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_92_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:05.154 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 93
2025-08-03 10:17:05.154 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 93
2025-08-03 10:17:05.154 [Thd =69]  Info Default  开始扫描条带； [93/261]
2025-08-03 10:17:05.163 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:17:05.165 [Thd =70]  Info Default ***row:93, vectorBeginX:-72.018, vectorBeginY:17.593, captureBeginX:-70.399, captureBeginY:17.593, captureEndX:69.750, captureEndY:17.593, vectorEndX:71.652, vectorEndY:17.593
2025-08-03 10:17:05.166 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:05.167 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3990479800225,EndPoint:-69.7498332138548
2025-08-03 10:17:05.530 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:05.532 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":92,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_92_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:06.413 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:06
2025-08-03 10:17:06.426 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:06
2025-08-03 10:17:10.014 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:93
2025-08-03 10:17:10.014 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:10.014 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:10.016 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:93
2025-08-03 10:17:10.016 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:93,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:10.016 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:A_SourceLightType
2025-08-03 10:17:10.016 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:93,source_light_Type:B_SourceLightType
2025-08-03 10:17:10.017 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,A_SourceLightType
2025-08-03 10:17:10.017 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：93,B_SourceLightType
2025-08-03 10:17:10.187 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;93/261,
2025-08-03 10:17:10.196 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:10.241 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:10.474 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:10.477 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_93_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:10.577 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 94
2025-08-03 10:17:10.579 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 94
2025-08-03 10:17:10.580 [Thd =53]  Info Default  开始扫描条带； [94/261]
2025-08-03 10:17:10.589 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:17:10.591 [Thd =70]  Info Default CaptureBeginX: 70.08727, CaptureBeginY:17.16449, CaptureEndX:-70.06161, CaptureEndY:17.16449, VectorBeginX:71.65216, VectorBeginY:17.16449, VectorEndX:-72.01810, VectorEndY:17.16449, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:17:10.592 [Thd =70]  Info Default ***row:94, vectorBeginX:71.652, vectorBeginY:17.164, captureBeginX:70.087, captureBeginY:17.164, captureEndX:-70.062, captureEndY:17.164, vectorEndX:-72.018, vectorEndY:17.164
2025-08-03 10:17:10.592 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:10.594 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.087274340358,EndPoint:70.0616068535193
2025-08-03 10:17:10.960 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:10.962 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":93,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_93_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:11.944 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:11
2025-08-03 10:17:11.959 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:11
2025-08-03 10:17:15.438 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:94
2025-08-03 10:17:15.439 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:15.439 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:15.441 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:94
2025-08-03 10:17:15.441 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:94,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:15.441 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:A_SourceLightType
2025-08-03 10:17:15.441 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:94,source_light_Type:B_SourceLightType
2025-08-03 10:17:15.442 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,A_SourceLightType
2025-08-03 10:17:15.442 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：94,B_SourceLightType
2025-08-03 10:17:15.623 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;94/261,
2025-08-03 10:17:15.632 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:15.695 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:15.898 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:15.900 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_94_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:16.030 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 95
2025-08-03 10:17:16.030 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 95
2025-08-03 10:17:16.030 [Thd =42]  Info Default  开始扫描条带； [95/261]
2025-08-03 10:17:16.039 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:17:16.042 [Thd =70]  Info Default ***row:95, vectorBeginX:-72.018, vectorBeginY:16.736, captureBeginX:-70.399, captureBeginY:16.736, captureEndX:69.750, captureEndY:16.736, vectorEndX:71.652, vectorEndY:16.736
2025-08-03 10:17:16.042 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:16.044 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3990108886832,EndPoint:-69.7498703051941
2025-08-03 10:17:16.370 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:16.373 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":94,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_94_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:17.980 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:17
2025-08-03 10:17:17.997 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:17
2025-08-03 10:17:20.893 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:95
2025-08-03 10:17:20.893 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:20.893 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:20.998 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:95
2025-08-03 10:17:20.998 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:95,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:20.999 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:B_SourceLightType
2025-08-03 10:17:20.999 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:95,source_light_Type:A_SourceLightType
2025-08-03 10:17:20.999 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,B_SourceLightType
2025-08-03 10:17:20.999 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：95,A_SourceLightType
2025-08-03 10:17:21.064 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;95/261,
2025-08-03 10:17:21.073 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:21.111 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:21.451 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 96
2025-08-03 10:17:21.451 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 96
2025-08-03 10:17:21.451 [Thd =55]  Info Default  开始扫描条带； [96/261]
2025-08-03 10:17:21.458 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:21.460 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:17:21.461 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_95_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:21.463 [Thd =70]  Info Default CaptureBeginX: 70.08731, CaptureBeginY:16.30786, CaptureEndX:-70.06157, CaptureEndY:16.30786, VectorBeginX:71.65220, VectorBeginY:16.30786, VectorEndX:-72.01806, VectorEndY:16.30786, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:17:21.463 [Thd =70]  Info Default ***row:96, vectorBeginX:71.652, vectorBeginY:16.308, captureBeginX:70.087, captureBeginY:16.308, captureEndX:-70.062, captureEndY:16.308, vectorEndX:-72.018, vectorEndY:16.308
2025-08-03 10:17:21.463 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:21.465 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0873114316973,EndPoint:70.06156976218
2025-08-03 10:17:21.942 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:21.945 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":95,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_95_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:22.010 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:22
2025-08-03 10:17:22.022 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:22
2025-08-03 10:17:26.310 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:96
2025-08-03 10:17:26.311 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:26.311 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:26.313 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:96
2025-08-03 10:17:26.313 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:96,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:26.313 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:A_SourceLightType
2025-08-03 10:17:26.313 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,A_SourceLightType
2025-08-03 10:17:26.313 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：96,B_SourceLightType
2025-08-03 10:17:26.313 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:96,source_light_Type:B_SourceLightType
2025-08-03 10:17:26.486 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;96/261,
2025-08-03 10:17:26.496 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:26.566 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:26.769 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:26.771 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_96_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:26.904 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 97
2025-08-03 10:17:26.904 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 97
2025-08-03 10:17:26.904 [Thd =58]  Info Default  开始扫描条带； [97/261]
2025-08-03 10:17:26.913 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:17:26.916 [Thd =70]  Info Default ***row:97, vectorBeginX:-72.018, vectorBeginY:15.880, captureBeginX:-70.399, captureBeginY:15.880, captureEndX:69.750, captureEndY:15.880, vectorEndX:71.652, vectorEndY:15.880
2025-08-03 10:17:26.916 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:26.917 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3989737973439,EndPoint:-69.7499073965334
2025-08-03 10:17:27.242 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:27.244 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":96,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_96_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:28.546 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:28
2025-08-03 10:17:28.559 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:28
2025-08-03 10:17:31.763 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:97
2025-08-03 10:17:31.764 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:31.764 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:31.766 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:97
2025-08-03 10:17:31.766 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:97,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:31.767 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:A_SourceLightType
2025-08-03 10:17:31.767 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:97,source_light_Type:B_SourceLightType
2025-08-03 10:17:31.767 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,A_SourceLightType
2025-08-03 10:17:31.767 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：97,B_SourceLightType
2025-08-03 10:17:31.935 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;97/261,
2025-08-03 10:17:31.945 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:31.991 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:32.224 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:32.226 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_97_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:32.329 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 98
2025-08-03 10:17:32.329 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 98
2025-08-03 10:17:32.329 [Thd =53]  Info Default  开始扫描条带； [98/261]
2025-08-03 10:17:32.341 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:17:32.344 [Thd =70]  Info Default CaptureBeginX: 70.08735, CaptureBeginY:15.45124, CaptureEndX:-70.06153, CaptureEndY:15.45124, VectorBeginX:71.65224, VectorBeginY:15.45124, VectorEndX:-72.01802, VectorEndY:15.45124, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:17:32.344 [Thd =70]  Info Default ***row:98, vectorBeginX:71.652, vectorBeginY:15.451, captureBeginX:70.087, captureBeginY:15.451, captureEndX:-70.062, captureEndY:15.451, vectorEndX:-72.018, vectorEndY:15.451
2025-08-03 10:17:32.344 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:32.345 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0873485230366,EndPoint:70.0615326708407
2025-08-03 10:17:32.698 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:32.700 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":97,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_97_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:33.073 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:33
2025-08-03 10:17:33.085 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:33
2025-08-03 10:17:37.190 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:98
2025-08-03 10:17:37.190 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:37.190 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:37.192 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:98
2025-08-03 10:17:37.192 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:98,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:37.192 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:A_SourceLightType
2025-08-03 10:17:37.192 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:98,source_light_Type:B_SourceLightType
2025-08-03 10:17:37.192 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,A_SourceLightType
2025-08-03 10:17:37.193 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：98,B_SourceLightType
2025-08-03 10:17:37.370 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;98/261,
2025-08-03 10:17:37.380 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:37.426 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:37.649 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:37.651 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_98_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:37.762 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 99
2025-08-03 10:17:37.762 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 99
2025-08-03 10:17:37.762 [Thd =51]  Info Default  开始扫描条带； [99/261]
2025-08-03 10:17:37.771 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:17:37.774 [Thd =70]  Info Default ***row:99, vectorBeginX:-72.018, vectorBeginY:15.023, captureBeginX:-70.399, captureBeginY:15.023, captureEndX:69.750, captureEndY:15.023, vectorEndX:71.652, vectorEndY:15.023
2025-08-03 10:17:37.774 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:37.775 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3989367060046,EndPoint:-69.7499444878727
2025-08-03 10:17:38.133 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:38.135 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":98,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_98_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:39.106 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:39
2025-08-03 10:17:39.118 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:39
2025-08-03 10:17:42.627 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:99
2025-08-03 10:17:42.627 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:42.627 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:42.629 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:99
2025-08-03 10:17:42.629 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:99,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:42.629 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:A_SourceLightType
2025-08-03 10:17:42.630 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:99,source_light_Type:B_SourceLightType
2025-08-03 10:17:42.630 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,A_SourceLightType
2025-08-03 10:17:42.630 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：99,B_SourceLightType
2025-08-03 10:17:42.796 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;99/261,
2025-08-03 10:17:42.805 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:42.847 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:43.089 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:43.092 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_99_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:43.131 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:43
2025-08-03 10:17:43.146 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:43
2025-08-03 10:17:43.182 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 100
2025-08-03 10:17:43.182 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 100
2025-08-03 10:17:43.182 [Thd =62]  Info Default  开始扫描条带； [100/261]
2025-08-03 10:17:43.191 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:17:43.194 [Thd =70]  Info Default CaptureBeginX: 70.08739, CaptureBeginY:14.59461, CaptureEndX:-70.06150, CaptureEndY:14.59461, VectorBeginX:71.65228, VectorBeginY:14.59461, VectorEndX:-72.01798, VectorEndY:14.59461, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:17:43.194 [Thd =70]  Info Default ***row:100, vectorBeginX:71.652, vectorBeginY:14.595, captureBeginX:70.087, captureBeginY:14.595, captureEndX:-70.061, captureEndY:14.595, vectorEndX:-72.018, vectorEndY:14.595
2025-08-03 10:17:43.194 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:43.195 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0873856143759,EndPoint:70.0614955795014
2025-08-03 10:17:43.566 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:43.569 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":99,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_99_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:48.040 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:100
2025-08-03 10:17:48.040 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:48.041 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:48.043 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:100
2025-08-03 10:17:48.043 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:100,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:48.043 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:A_SourceLightType
2025-08-03 10:17:48.043 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:100,source_light_Type:B_SourceLightType
2025-08-03 10:17:48.043 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,A_SourceLightType
2025-08-03 10:17:48.043 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：100,B_SourceLightType
2025-08-03 10:17:48.213 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;100/261,
2025-08-03 10:17:48.222 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:48.311 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:48.503 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:48.505 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_100_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:48.647 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 101
2025-08-03 10:17:48.647 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 101
2025-08-03 10:17:48.647 [Thd =53]  Info Default  开始扫描条带； [101/261]
2025-08-03 10:17:48.656 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:17:48.659 [Thd =70]  Info Default ***row:101, vectorBeginX:-72.018, vectorBeginY:14.166, captureBeginX:-70.399, captureBeginY:14.166, captureEndX:69.750, captureEndY:14.166, vectorEndX:71.652, vectorEndY:14.166
2025-08-03 10:17:48.659 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:48.661 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3988996146653,EndPoint:-69.7499815792119
2025-08-03 10:17:48.979 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:48.982 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":100,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_100_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:50.672 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:50
2025-08-03 10:17:50.690 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:50
2025-08-03 10:17:53.512 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:101
2025-08-03 10:17:53.513 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:53.513 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:53.514 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:101
2025-08-03 10:17:53.514 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:101,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:53.518 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:A_SourceLightType
2025-08-03 10:17:53.518 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:101,source_light_Type:B_SourceLightType
2025-08-03 10:17:53.518 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,A_SourceLightType
2025-08-03 10:17:53.518 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：101,B_SourceLightType
2025-08-03 10:17:53.686 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;101/261,
2025-08-03 10:17:53.696 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:53.737 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:53.975 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:53.977 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_101_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:54.071 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 102
2025-08-03 10:17:54.071 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 102
2025-08-03 10:17:54.071 [Thd =69]  Info Default  开始扫描条带； [102/261]
2025-08-03 10:17:54.080 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:17:54.083 [Thd =70]  Info Default CaptureBeginX: 70.08742, CaptureBeginY:13.73799, CaptureEndX:-70.06146, CaptureEndY:13.73799, VectorBeginX:71.65231, VectorBeginY:13.73799, VectorEndX:-72.01795, VectorEndY:13.73799, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:17:54.083 [Thd =70]  Info Default ***row:102, vectorBeginX:71.652, vectorBeginY:13.738, captureBeginX:70.087, captureBeginY:13.738, captureEndX:-70.061, captureEndY:13.738, vectorEndX:-72.018, vectorEndY:13.738
2025-08-03 10:17:54.083 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:54.085 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0874227057152,EndPoint:70.0614584881621
2025-08-03 10:17:54.451 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:54.453 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":101,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_101_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:55.207 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:17:55
2025-08-03 10:17:55.219 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:17:55
2025-08-03 10:17:58.932 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:102
2025-08-03 10:17:58.932 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:58.933 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:17:59.015 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:102
2025-08-03 10:17:59.015 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:102,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:17:59.015 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:B_SourceLightType
2025-08-03 10:17:59.015 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:102,source_light_Type:A_SourceLightType
2025-08-03 10:17:59.015 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,B_SourceLightType
2025-08-03 10:17:59.015 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：102,A_SourceLightType
2025-08-03 10:17:59.113 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;102/261,
2025-08-03 10:17:59.122 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:17:59.165 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:17:59.474 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:17:59.476 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_102_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:17:59.501 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 103
2025-08-03 10:17:59.501 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 103
2025-08-03 10:17:59.501 [Thd =55]  Info Default  开始扫描条带； [103/261]
2025-08-03 10:17:59.514 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:17:59.516 [Thd =70]  Info Default ***row:103, vectorBeginX:-72.018, vectorBeginY:13.310, captureBeginX:-70.399, captureBeginY:13.310, captureEndX:69.750, captureEndY:13.310, vectorEndX:71.652, vectorEndY:13.310
2025-08-03 10:17:59.517 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:17:59.519 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.398862523326,EndPoint:-69.7500186705512
2025-08-03 10:17:59.991 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:17:59.993 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":102,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_102_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:01.242 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:01
2025-08-03 10:18:01.261 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:01
2025-08-03 10:18:04.367 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:103
2025-08-03 10:18:04.367 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:04.367 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:04.368 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:103
2025-08-03 10:18:04.368 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:103,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:04.369 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:A_SourceLightType
2025-08-03 10:18:04.369 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:103,source_light_Type:B_SourceLightType
2025-08-03 10:18:04.369 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,A_SourceLightType
2025-08-03 10:18:04.369 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：103,B_SourceLightType
2025-08-03 10:18:04.545 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;103/261,
2025-08-03 10:18:04.555 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:04.597 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:04.826 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:04.829 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_103_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:04.933 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 104
2025-08-03 10:18:04.933 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 104
2025-08-03 10:18:04.933 [Thd =64]  Info Default  开始扫描条带； [104/261]
2025-08-03 10:18:04.942 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:18:04.945 [Thd =70]  Info Default CaptureBeginX: 70.08746, CaptureBeginY:12.88136, CaptureEndX:-70.06142, CaptureEndY:12.88136, VectorBeginX:71.65235, VectorBeginY:12.88136, VectorEndX:-72.01791, VectorEndY:12.88136, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:18:04.945 [Thd =70]  Info Default ***row:104, vectorBeginX:71.652, vectorBeginY:12.881, captureBeginX:70.087, captureBeginY:12.881, captureEndX:-70.061, captureEndY:12.881, vectorEndX:-72.018, vectorEndY:12.881
2025-08-03 10:18:04.945 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:04.946 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0874597970544,EndPoint:70.0614213968228
2025-08-03 10:18:05.301 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:05.303 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":103,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_103_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:05.776 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:05
2025-08-03 10:18:05.789 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:05
2025-08-03 10:18:09.792 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:104
2025-08-03 10:18:09.793 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:09.793 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:09.794 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:104
2025-08-03 10:18:09.794 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:104,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:09.795 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:A_SourceLightType
2025-08-03 10:18:09.795 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:104,source_light_Type:B_SourceLightType
2025-08-03 10:18:09.795 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,A_SourceLightType
2025-08-03 10:18:09.795 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：104,B_SourceLightType
2025-08-03 10:18:09.975 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;104/261,
2025-08-03 10:18:09.985 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:10.036 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:10.253 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:10.255 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_104_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:10.381 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 105
2025-08-03 10:18:10.381 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 105
2025-08-03 10:18:10.381 [Thd =53]  Info Default  开始扫描条带； [105/261]
2025-08-03 10:18:10.390 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:18:10.393 [Thd =70]  Info Default ***row:105, vectorBeginX:-72.018, vectorBeginY:12.453, captureBeginX:-70.399, captureBeginY:12.453, captureEndX:69.750, captureEndY:12.453, vectorEndX:71.652, vectorEndY:12.453
2025-08-03 10:18:10.393 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:10.395 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3988254319867,EndPoint:-69.7500557618905
2025-08-03 10:18:10.726 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:10.728 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":104,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_104_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:11.810 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:11
2025-08-03 10:18:11.821 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:11
2025-08-03 10:18:15.242 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:105
2025-08-03 10:18:15.243 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:15.243 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:15.244 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:105
2025-08-03 10:18:15.245 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:105,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:15.245 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:A_SourceLightType
2025-08-03 10:18:15.245 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:105,source_light_Type:B_SourceLightType
2025-08-03 10:18:15.245 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,A_SourceLightType
2025-08-03 10:18:15.245 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：105,B_SourceLightType
2025-08-03 10:18:15.415 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;105/261,
2025-08-03 10:18:15.424 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:15.466 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:15.705 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:15.707 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_105_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:15.805 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 106
2025-08-03 10:18:15.805 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 106
2025-08-03 10:18:15.805 [Thd =53]  Info Default  开始扫描条带； [106/261]
2025-08-03 10:18:15.814 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:18:15.816 [Thd =70]  Info Default CaptureBeginX: 70.08750, CaptureBeginY:12.02473, CaptureEndX:-70.06138, CaptureEndY:12.02473, VectorBeginX:71.65239, VectorBeginY:12.02473, VectorEndX:-72.01787, VectorEndY:12.02473, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:18:15.816 [Thd =70]  Info Default ***row:106, vectorBeginX:71.652, vectorBeginY:12.025, captureBeginX:70.087, captureBeginY:12.025, captureEndX:-70.061, captureEndY:12.025, vectorEndX:-72.018, vectorEndY:12.025
2025-08-03 10:18:15.816 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:15.818 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0874968883937,EndPoint:70.0613843054835
2025-08-03 10:18:16.187 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:16.190 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":105,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_105_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:16.892 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:16
2025-08-03 10:18:16.912 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:16
2025-08-03 10:18:20.663 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:106
2025-08-03 10:18:20.663 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:20.663 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:20.665 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:106
2025-08-03 10:18:20.665 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:106,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:20.665 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:A_SourceLightType
2025-08-03 10:18:20.665 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:106,source_light_Type:B_SourceLightType
2025-08-03 10:18:20.666 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,A_SourceLightType
2025-08-03 10:18:20.666 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：106,B_SourceLightType
2025-08-03 10:18:20.840 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;106/261,
2025-08-03 10:18:20.849 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:20.907 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:21.124 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:21.126 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_106_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:21.244 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 107
2025-08-03 10:18:21.244 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 107
2025-08-03 10:18:21.244 [Thd =47]  Info Default  开始扫描条带； [107/261]
2025-08-03 10:18:21.253 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:18:21.256 [Thd =70]  Info Default ***row:107, vectorBeginX:-72.018, vectorBeginY:11.596, captureBeginX:-70.399, captureBeginY:11.596, captureEndX:69.750, captureEndY:11.596, vectorEndX:71.652, vectorEndY:11.596
2025-08-03 10:18:21.256 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:21.258 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3987883406474,EndPoint:-69.7500928532298
2025-08-03 10:18:21.619 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:21.622 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":106,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_106_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:22.932 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:22
2025-08-03 10:18:22.952 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:22
2025-08-03 10:18:26.106 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:107
2025-08-03 10:18:26.107 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:26.107 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:26.108 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:107
2025-08-03 10:18:26.108 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:107,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:26.108 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:A_SourceLightType
2025-08-03 10:18:26.108 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:107,source_light_Type:B_SourceLightType
2025-08-03 10:18:26.109 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,A_SourceLightType
2025-08-03 10:18:26.109 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：107,B_SourceLightType
2025-08-03 10:18:26.283 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;107/261,
2025-08-03 10:18:26.293 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:26.332 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:26.568 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:26.570 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_107_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:26.666 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 108
2025-08-03 10:18:26.666 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 108
2025-08-03 10:18:26.666 [Thd =35]  Info Default  开始扫描条带； [108/261]
2025-08-03 10:18:26.679 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:18:26.681 [Thd =70]  Info Default CaptureBeginX: 70.08753, CaptureBeginY:11.16811, CaptureEndX:-70.06135, CaptureEndY:11.16811, VectorBeginX:71.65242, VectorBeginY:11.16811, VectorEndX:-72.01784, VectorEndY:11.16811, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:18:26.682 [Thd =70]  Info Default ***row:108, vectorBeginX:71.652, vectorBeginY:11.168, captureBeginX:70.088, captureBeginY:11.168, captureEndX:-70.061, captureEndY:11.168, vectorEndX:-72.018, vectorEndY:11.168
2025-08-03 10:18:26.682 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:26.684 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.087533979733,EndPoint:70.0613472141442
2025-08-03 10:18:26.966 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:26
2025-08-03 10:18:26.981 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:26
2025-08-03 10:18:27.047 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:27.049 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":107,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_107_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:31.534 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:108
2025-08-03 10:18:31.535 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:31.535 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:31.537 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:108
2025-08-03 10:18:31.537 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:108,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:31.537 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:A_SourceLightType
2025-08-03 10:18:31.537 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:108,source_light_Type:B_SourceLightType
2025-08-03 10:18:31.537 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,A_SourceLightType
2025-08-03 10:18:31.537 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：108,B_SourceLightType
2025-08-03 10:18:31.709 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;108/261,
2025-08-03 10:18:31.719 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:31.797 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:31.995 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:31.998 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_108_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:32.133 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 109
2025-08-03 10:18:32.133 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 109
2025-08-03 10:18:32.133 [Thd =42]  Info Default  开始扫描条带； [109/261]
2025-08-03 10:18:32.149 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:18:32.151 [Thd =70]  Info Default ***row:109, vectorBeginX:-72.018, vectorBeginY:10.740, captureBeginX:-70.399, captureBeginY:10.740, captureEndX:69.750, captureEndY:10.740, vectorEndX:71.652, vectorEndY:10.740
2025-08-03 10:18:32.151 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:32.153 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3987512493081,EndPoint:-69.7501299445691
2025-08-03 10:18:32.468 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:32.470 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":108,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_108_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:34.003 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:34
2025-08-03 10:18:34.018 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:34
2025-08-03 10:18:37.002 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:109
2025-08-03 10:18:37.002 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:37.002 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:37.004 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:109
2025-08-03 10:18:37.005 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:109,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:37.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:A_SourceLightType
2025-08-03 10:18:37.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:109,source_light_Type:B_SourceLightType
2025-08-03 10:18:37.005 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,A_SourceLightType
2025-08-03 10:18:37.005 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：109,B_SourceLightType
2025-08-03 10:18:37.173 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;109/261,
2025-08-03 10:18:37.182 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:37.220 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:37.461 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:37.464 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_109_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:37.569 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 110
2025-08-03 10:18:37.569 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 110
2025-08-03 10:18:37.569 [Thd =58]  Info Default  开始扫描条带； [110/261]
2025-08-03 10:18:37.578 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:18:37.581 [Thd =70]  Info Default CaptureBeginX: 70.08757, CaptureBeginY:10.31148, CaptureEndX:-70.06131, CaptureEndY:10.31148, VectorBeginX:71.65246, VectorBeginY:10.31148, VectorEndX:-72.01780, VectorEndY:10.31148, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:18:37.581 [Thd =70]  Info Default ***row:110, vectorBeginX:71.652, vectorBeginY:10.311, captureBeginX:70.088, captureBeginY:10.311, captureEndX:-70.061, captureEndY:10.311, vectorEndX:-72.018, vectorEndY:10.311
2025-08-03 10:18:37.581 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:37.583 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0875710710723,EndPoint:70.0613101228049
2025-08-03 10:18:37.955 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:37.957 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":109,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_109_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:38.032 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:38
2025-08-03 10:18:38.051 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:38
2025-08-03 10:18:42.432 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:110
2025-08-03 10:18:42.433 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:42.433 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:42.435 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:110
2025-08-03 10:18:42.435 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:110,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:42.435 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:A_SourceLightType
2025-08-03 10:18:42.435 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:110,source_light_Type:B_SourceLightType
2025-08-03 10:18:42.435 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,A_SourceLightType
2025-08-03 10:18:42.436 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：110,B_SourceLightType
2025-08-03 10:18:42.605 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;110/261,
2025-08-03 10:18:42.615 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:42.675 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:42.893 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:42.896 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_110_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:43.013 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 111
2025-08-03 10:18:43.013 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 111
2025-08-03 10:18:43.013 [Thd =64]  Info Default  开始扫描条带； [111/261]
2025-08-03 10:18:43.022 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:18:43.025 [Thd =70]  Info Default ***row:111, vectorBeginX:-72.018, vectorBeginY:9.883, captureBeginX:-70.399, captureBeginY:9.883, captureEndX:69.750, captureEndY:9.883, vectorEndX:71.652, vectorEndY:9.883
2025-08-03 10:18:43.025 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:43.027 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3987141579688,EndPoint:-69.7501670359084
2025-08-03 10:18:43.374 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:43.376 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":110,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_110_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:44.572 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:44
2025-08-03 10:18:44.589 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:44
2025-08-03 10:18:47.874 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:111
2025-08-03 10:18:47.874 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:47.874 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:47.876 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:111
2025-08-03 10:18:47.877 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:111,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:47.877 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:A_SourceLightType
2025-08-03 10:18:47.877 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,A_SourceLightType
2025-08-03 10:18:47.877 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：111,B_SourceLightType
2025-08-03 10:18:47.877 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:111,source_light_Type:B_SourceLightType
2025-08-03 10:18:48.053 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;111/261,
2025-08-03 10:18:48.062 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:48.107 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:48.337 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:48.339 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_111_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:48.453 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 112
2025-08-03 10:18:48.453 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 112
2025-08-03 10:18:48.453 [Thd =51]  Info Default  开始扫描条带； [112/261]
2025-08-03 10:18:48.462 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:18:48.464 [Thd =70]  Info Default CaptureBeginX: 70.08761, CaptureBeginY:9.45486, CaptureEndX:-70.06127, CaptureEndY:9.45486, VectorBeginX:71.65250, VectorBeginY:9.45486, VectorEndX:-72.01776, VectorEndY:9.45486, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:18:48.465 [Thd =70]  Info Default ***row:112, vectorBeginX:71.652, vectorBeginY:9.455, captureBeginX:70.088, captureBeginY:9.455, captureEndX:-70.061, captureEndY:9.455, vectorEndX:-72.018, vectorEndY:9.455
2025-08-03 10:18:48.465 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:48.467 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0876081624116,EndPoint:70.0612730314656
2025-08-03 10:18:48.818 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:48.821 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":111,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_111_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:49.105 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:49
2025-08-03 10:18:49.124 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:49
2025-08-03 10:18:53.316 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:112
2025-08-03 10:18:53.316 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:53.316 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:53.318 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:112
2025-08-03 10:18:53.319 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:112,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:53.319 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:A_SourceLightType
2025-08-03 10:18:53.319 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:112,source_light_Type:B_SourceLightType
2025-08-03 10:18:53.319 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,A_SourceLightType
2025-08-03 10:18:53.319 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：112,B_SourceLightType
2025-08-03 10:18:53.498 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;112/261,
2025-08-03 10:18:53.507 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:53.549 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:53.778 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:53.781 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_112_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:53.895 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 113
2025-08-03 10:18:53.895 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 113
2025-08-03 10:18:53.895 [Thd =62]  Info Default  开始扫描条带； [113/261]
2025-08-03 10:18:53.904 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:18:53.907 [Thd =70]  Info Default ***row:113, vectorBeginX:-72.018, vectorBeginY:9.027, captureBeginX:-70.399, captureBeginY:9.027, captureEndX:69.750, captureEndY:9.027, vectorEndX:71.653, vectorEndY:9.027
2025-08-03 10:18:53.907 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:53.910 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3986770666295,EndPoint:-69.7502041272477
2025-08-03 10:18:54.251 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:54.253 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":112,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_112_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:55.646 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:18:55
2025-08-03 10:18:55.666 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:18:55
2025-08-03 10:18:58.758 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:113
2025-08-03 10:18:58.759 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:58.759 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:18:58.762 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:113
2025-08-03 10:18:58.762 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:113,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:18:58.762 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:B_SourceLightType
2025-08-03 10:18:58.762 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:113,source_light_Type:A_SourceLightType
2025-08-03 10:18:58.762 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,B_SourceLightType
2025-08-03 10:18:58.762 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：113,A_SourceLightType
2025-08-03 10:18:58.937 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;113/261,
2025-08-03 10:18:58.946 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:18:58.996 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:18:59.223 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:18:59.226 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_113_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:18:59.339 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 114
2025-08-03 10:18:59.339 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 114
2025-08-03 10:18:59.339 [Thd =58]  Info Default  开始扫描条带； [114/261]
2025-08-03 10:18:59.355 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:18:59.357 [Thd =70]  Info Default CaptureBeginX: 70.08765, CaptureBeginY:8.59823, CaptureEndX:-70.06124, CaptureEndY:8.59823, VectorBeginX:71.65254, VectorBeginY:8.59823, VectorEndX:-72.01772, VectorEndY:8.59823, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:18:59.358 [Thd =70]  Info Default ***row:114, vectorBeginX:71.653, vectorBeginY:8.598, captureBeginX:70.088, captureBeginY:8.598, captureEndX:-70.061, captureEndY:8.598, vectorEndX:-72.018, vectorEndY:8.598
2025-08-03 10:18:59.358 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:18:59.359 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0876452537509,EndPoint:70.0612359401263
2025-08-03 10:18:59.698 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:18:59.700 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":113,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_113_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:00.683 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:00
2025-08-03 10:19:00.695 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:00
2025-08-03 10:19:04.210 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:114
2025-08-03 10:19:04.210 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:04.210 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:04.211 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:114
2025-08-03 10:19:04.212 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:114,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:04.212 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:A_SourceLightType
2025-08-03 10:19:04.212 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:114,source_light_Type:B_SourceLightType
2025-08-03 10:19:04.212 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,A_SourceLightType
2025-08-03 10:19:04.212 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：114,B_SourceLightType
2025-08-03 10:19:04.392 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;114/261,
2025-08-03 10:19:04.401 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:04.524 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:04.677 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:04.679 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_114_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:04.871 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 115
2025-08-03 10:19:04.871 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 115
2025-08-03 10:19:04.871 [Thd =64]  Info Default  开始扫描条带； [115/261]
2025-08-03 10:19:04.880 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:19:04.883 [Thd =70]  Info Default ***row:115, vectorBeginX:-72.018, vectorBeginY:8.170, captureBeginX:-70.399, captureBeginY:8.170, captureEndX:69.750, captureEndY:8.170, vectorEndX:71.653, vectorEndY:8.170
2025-08-03 10:19:04.883 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:04.887 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3986399752902,EndPoint:-69.750241218587
2025-08-03 10:19:05.152 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:05.154 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":114,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_114_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:06.275 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:06
2025-08-03 10:19:06.288 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:06
2025-08-03 10:19:09.738 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:115
2025-08-03 10:19:09.738 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:09.738 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:09.741 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:115
2025-08-03 10:19:09.741 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:115,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:09.741 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:A_SourceLightType
2025-08-03 10:19:09.741 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:115,source_light_Type:B_SourceLightType
2025-08-03 10:19:09.741 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,A_SourceLightType
2025-08-03 10:19:09.741 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：115,B_SourceLightType
2025-08-03 10:19:09.919 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;115/261,
2025-08-03 10:19:09.928 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:10.043 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:10.200 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:10.202 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_115_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:10.379 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 116
2025-08-03 10:19:10.379 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 116
2025-08-03 10:19:10.379 [Thd =64]  Info Default  开始扫描条带； [116/261]
2025-08-03 10:19:10.388 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:19:10.391 [Thd =70]  Info Default CaptureBeginX: 70.08768, CaptureBeginY:7.74161, CaptureEndX:-70.06120, CaptureEndY:7.74161, VectorBeginX:71.65257, VectorBeginY:7.74161, VectorEndX:-72.01769, VectorEndY:7.74161, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:19:10.391 [Thd =70]  Info Default ***row:116, vectorBeginX:71.653, vectorBeginY:7.742, captureBeginX:70.088, captureBeginY:7.742, captureEndX:-70.061, captureEndY:7.742, vectorEndX:-72.018, vectorEndY:7.742
2025-08-03 10:19:10.391 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:10.393 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0876823450902,EndPoint:70.061198848787
2025-08-03 10:19:10.673 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:10.676 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":115,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_115_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:10.803 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:10
2025-08-03 10:19:10.814 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:10
2025-08-03 10:19:15.239 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:116
2025-08-03 10:19:15.240 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:15.240 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:15.242 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:116
2025-08-03 10:19:15.242 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:116,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:15.242 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:A_SourceLightType
2025-08-03 10:19:15.242 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:116,source_light_Type:B_SourceLightType
2025-08-03 10:19:15.242 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,A_SourceLightType
2025-08-03 10:19:15.243 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：116,B_SourceLightType
2025-08-03 10:19:15.419 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;116/261,
2025-08-03 10:19:15.429 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:15.482 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:15.698 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:15.701 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_116_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:15.817 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 117
2025-08-03 10:19:15.817 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 117
2025-08-03 10:19:15.817 [Thd =68]  Info Default  开始扫描条带； [117/261]
2025-08-03 10:19:15.827 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:19:15.830 [Thd =70]  Info Default ***row:117, vectorBeginX:-72.018, vectorBeginY:7.313, captureBeginX:-70.399, captureBeginY:7.313, captureEndX:69.750, captureEndY:7.313, vectorEndX:71.653, vectorEndY:7.313
2025-08-03 10:19:15.830 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:15.833 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3986028839509,EndPoint:-69.7502783099263
2025-08-03 10:19:16.168 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:16.170 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":116,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_116_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:16.837 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:16
2025-08-03 10:19:16.859 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:16
2025-08-03 10:19:20.685 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:117
2025-08-03 10:19:20.685 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:20.685 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:20.688 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:117
2025-08-03 10:19:20.688 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:117,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:20.688 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:A_SourceLightType
2025-08-03 10:19:20.688 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:117,source_light_Type:B_SourceLightType
2025-08-03 10:19:20.688 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,A_SourceLightType
2025-08-03 10:19:20.688 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：117,B_SourceLightType
2025-08-03 10:19:20.865 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;117/261,
2025-08-03 10:19:20.875 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:20.928 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:21.144 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:21.146 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_117_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:21.275 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 118
2025-08-03 10:19:21.275 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 118
2025-08-03 10:19:21.275 [Thd =47]  Info Default  开始扫描条带； [118/261]
2025-08-03 10:19:21.284 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:19:21.287 [Thd =70]  Info Default CaptureBeginX: 70.08772, CaptureBeginY:6.88498, CaptureEndX:-70.06116, CaptureEndY:6.88498, VectorBeginX:71.65261, VectorBeginY:6.88498, VectorEndX:-72.01765, VectorEndY:6.88498, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:19:21.287 [Thd =70]  Info Default ***row:118, vectorBeginX:71.653, vectorBeginY:6.885, captureBeginX:70.088, captureBeginY:6.885, captureEndX:-70.061, captureEndY:6.885, vectorEndX:-72.018, vectorEndY:6.885
2025-08-03 10:19:21.287 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:21.289 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0877194364295,EndPoint:70.0611617574477
2025-08-03 10:19:21.616 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:21.618 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":117,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_117_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:21.875 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:21
2025-08-03 10:19:21.893 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:21
2025-08-03 10:19:26.138 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:118
2025-08-03 10:19:26.138 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:26.138 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:26.310 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;118/261,
2025-08-03 10:19:26.315 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:118
2025-08-03 10:19:26.315 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:118,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:26.315 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:B_SourceLightType
2025-08-03 10:19:26.315 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:118,source_light_Type:A_SourceLightType
2025-08-03 10:19:26.315 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,B_SourceLightType
2025-08-03 10:19:26.315 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：118,A_SourceLightType
2025-08-03 10:19:26.324 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:26.365 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:26.701 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 119
2025-08-03 10:19:26.701 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 119
2025-08-03 10:19:26.701 [Thd =53]  Info Default  开始扫描条带； [119/261]
2025-08-03 10:19:26.710 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:19:26.713 [Thd =70]  Info Default ***row:119, vectorBeginX:-72.018, vectorBeginY:6.457, captureBeginX:-70.399, captureBeginY:6.457, captureEndX:69.750, captureEndY:6.457, vectorEndX:71.653, vectorEndY:6.457
2025-08-03 10:19:26.713 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:26.715 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3985657926116,EndPoint:-69.7503154012656
2025-08-03 10:19:26.771 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:26.774 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_118_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:27.261 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:27.263 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":118,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_118_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:27.916 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:27
2025-08-03 10:19:27.931 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:27
2025-08-03 10:19:31.566 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:119
2025-08-03 10:19:31.567 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:31.567 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:31.569 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:119
2025-08-03 10:19:31.569 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:119,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:31.569 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:A_SourceLightType
2025-08-03 10:19:31.569 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:119,source_light_Type:B_SourceLightType
2025-08-03 10:19:31.569 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,A_SourceLightType
2025-08-03 10:19:31.570 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：119,B_SourceLightType
2025-08-03 10:19:31.743 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;119/261,
2025-08-03 10:19:31.752 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:31.795 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:32.024 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:32.026 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_119_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:32.141 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 120
2025-08-03 10:19:32.141 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 120
2025-08-03 10:19:32.141 [Thd =47]  Info Default  开始扫描条带； [120/261]
2025-08-03 10:19:32.150 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:19:32.153 [Thd =70]  Info Default CaptureBeginX: 70.08776, CaptureBeginY:6.02836, CaptureEndX:-70.06112, CaptureEndY:6.02836, VectorBeginX:71.65265, VectorBeginY:6.02836, VectorEndX:-72.01761, VectorEndY:6.02836, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:19:32.153 [Thd =70]  Info Default ***row:120, vectorBeginX:71.653, vectorBeginY:6.028, captureBeginX:70.088, captureBeginY:6.028, captureEndX:-70.061, captureEndY:6.028, vectorEndX:-72.018, vectorEndY:6.028
2025-08-03 10:19:32.153 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:32.155 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0877565277688,EndPoint:70.0611246661084
2025-08-03 10:19:32.447 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:32
2025-08-03 10:19:32.460 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:32
2025-08-03 10:19:32.496 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:32.498 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":119,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_119_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:37.002 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:120
2025-08-03 10:19:37.002 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:120,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:37.003 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:37.005 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:120
2025-08-03 10:19:37.005 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:120,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:37.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:120,source_light_Type:A_SourceLightType
2025-08-03 10:19:37.005 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:120,source_light_Type:B_SourceLightType
2025-08-03 10:19:37.005 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：120,A_SourceLightType
2025-08-03 10:19:37.006 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：120,B_SourceLightType
2025-08-03 10:19:37.185 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;120/261,
2025-08-03 10:19:37.194 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:37.243 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:37.479 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:37.481 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":120,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_120_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:37.580 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 121
2025-08-03 10:19:37.580 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 121
2025-08-03 10:19:37.580 [Thd =55]  Info Default  开始扫描条带； [121/261]
2025-08-03 10:19:37.588 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:19:37.591 [Thd =70]  Info Default ***row:121, vectorBeginX:-72.018, vectorBeginY:5.600, captureBeginX:-70.399, captureBeginY:5.600, captureEndX:69.750, captureEndY:5.600, vectorEndX:71.653, vectorEndY:5.600
2025-08-03 10:19:37.591 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:37.592 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3985287012723,EndPoint:-69.7503524926049
2025-08-03 10:19:37.958 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:37.959 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":120,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_120_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:38.982 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:38
2025-08-03 10:19:39.000 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:39
2025-08-03 10:19:42.441 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:121
2025-08-03 10:19:42.441 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:121,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:42.441 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:42.442 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:121
2025-08-03 10:19:42.442 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:121,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:42.442 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:121,source_light_Type:A_SourceLightType
2025-08-03 10:19:42.442 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:121,source_light_Type:B_SourceLightType
2025-08-03 10:19:42.442 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：121,A_SourceLightType
2025-08-03 10:19:42.443 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：121,B_SourceLightType
2025-08-03 10:19:42.618 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;121/261,
2025-08-03 10:19:42.627 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:42.669 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:42.898 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:42.901 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":121,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_121_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:43.015 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 122
2025-08-03 10:19:43.015 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 122
2025-08-03 10:19:43.015 [Thd =55]  Info Default  开始扫描条带； [122/261]
2025-08-03 10:19:43.024 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:19:43.027 [Thd =70]  Info Default CaptureBeginX: 70.08779, CaptureBeginY:5.17173, CaptureEndX:-70.06109, CaptureEndY:5.17173, VectorBeginX:71.65268, VectorBeginY:5.17173, VectorEndX:-72.01758, VectorEndY:5.17173, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:19:43.027 [Thd =70]  Info Default ***row:122, vectorBeginX:71.653, vectorBeginY:5.172, captureBeginX:70.088, captureBeginY:5.172, captureEndX:-70.061, captureEndY:5.172, vectorEndX:-72.018, vectorEndY:5.172
2025-08-03 10:19:43.027 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:43.029 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0877936191081,EndPoint:70.0610875747691
2025-08-03 10:19:43.373 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:43.376 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":121,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_121_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:44.016 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:44
2025-08-03 10:19:44.035 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:44
2025-08-03 10:19:47.877 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:122
2025-08-03 10:19:47.877 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:122,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:47.877 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:47.878 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:122
2025-08-03 10:19:47.878 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:122,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:47.878 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:122,source_light_Type:A_SourceLightType
2025-08-03 10:19:47.878 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:122,source_light_Type:B_SourceLightType
2025-08-03 10:19:47.878 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：122,A_SourceLightType
2025-08-03 10:19:47.879 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：122,B_SourceLightType
2025-08-03 10:19:48.047 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;122/261,
2025-08-03 10:19:48.056 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:48.104 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:48.335 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:48.337 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":122,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_122_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:48.438 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 123
2025-08-03 10:19:48.438 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 123
2025-08-03 10:19:48.438 [Thd =5]  Info Default  开始扫描条带； [123/261]
2025-08-03 10:19:48.447 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:19:48.450 [Thd =70]  Info Default ***row:123, vectorBeginX:-72.018, vectorBeginY:4.743, captureBeginX:-70.398, captureBeginY:4.743, captureEndX:69.750, captureEndY:4.743, vectorEndX:71.653, vectorEndY:4.743
2025-08-03 10:19:48.450 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:48.452 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.398491609933,EndPoint:-69.7503895839442
2025-08-03 10:19:48.808 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:48.810 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":122,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_122_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:50.056 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:50
2025-08-03 10:19:50.077 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:50
2025-08-03 10:19:53.300 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:123
2025-08-03 10:19:53.300 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:123,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:53.300 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:53.301 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:123
2025-08-03 10:19:53.301 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:123,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:53.301 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:123,source_light_Type:A_SourceLightType
2025-08-03 10:19:53.301 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:123,source_light_Type:B_SourceLightType
2025-08-03 10:19:53.302 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：123,A_SourceLightType
2025-08-03 10:19:53.302 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：123,B_SourceLightType
2025-08-03 10:19:53.480 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;123/261,
2025-08-03 10:19:53.489 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:53.527 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:53.770 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:53.772 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":123,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_123_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:53.874 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 124
2025-08-03 10:19:53.874 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 124
2025-08-03 10:19:53.874 [Thd =68]  Info Default  开始扫描条带； [124/261]
2025-08-03 10:19:53.883 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:19:53.885 [Thd =70]  Info Default CaptureBeginX: 70.08783, CaptureBeginY:4.31511, CaptureEndX:-70.06105, CaptureEndY:4.31511, VectorBeginX:71.65272, VectorBeginY:4.31511, VectorEndX:-72.01754, VectorEndY:4.31511, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:19:53.885 [Thd =70]  Info Default ***row:124, vectorBeginX:71.653, vectorBeginY:4.315, captureBeginX:70.088, captureBeginY:4.315, captureEndX:-70.061, captureEndY:4.315, vectorEndX:-72.018, vectorEndY:4.315
2025-08-03 10:19:53.886 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:53.887 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0878307104474,EndPoint:70.0610504834298
2025-08-03 10:19:54.248 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:54.250 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":123,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_123_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:54.592 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:19:54
2025-08-03 10:19:54.604 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:19:54
2025-08-03 10:19:58.731 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:124
2025-08-03 10:19:58.731 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:124,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:58.732 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:19:58.733 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:124
2025-08-03 10:19:58.733 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:124,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:19:58.733 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:124,source_light_Type:A_SourceLightType
2025-08-03 10:19:58.734 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:124,source_light_Type:B_SourceLightType
2025-08-03 10:19:58.734 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：124,A_SourceLightType
2025-08-03 10:19:58.734 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：124,B_SourceLightType
2025-08-03 10:19:58.905 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;124/261,
2025-08-03 10:19:58.913 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:19:58.964 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:19:59.191 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:19:59.193 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":124,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_124_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:19:59.302 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 125
2025-08-03 10:19:59.302 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 125
2025-08-03 10:19:59.302 [Thd =55]  Info Default  开始扫描条带； [125/261]
2025-08-03 10:19:59.311 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:19:59.314 [Thd =70]  Info Default ***row:125, vectorBeginX:-72.018, vectorBeginY:3.887, captureBeginX:-70.398, captureBeginY:3.887, captureEndX:69.750, captureEndY:3.887, vectorEndX:71.653, vectorEndY:3.887
2025-08-03 10:19:59.314 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:19:59.316 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3984545185938,EndPoint:-69.7504266752835
2025-08-03 10:19:59.672 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:19:59.674 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":124,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_124_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:00.624 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:00
2025-08-03 10:20:00.635 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:00
2025-08-03 10:20:04.165 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:125
2025-08-03 10:20:04.165 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:125,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:04.165 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:04.167 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:125
2025-08-03 10:20:04.167 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:125,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:04.167 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:125,source_light_Type:A_SourceLightType
2025-08-03 10:20:04.167 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:125,source_light_Type:B_SourceLightType
2025-08-03 10:20:04.167 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：125,A_SourceLightType
2025-08-03 10:20:04.167 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：125,B_SourceLightType
2025-08-03 10:20:04.338 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;125/261,
2025-08-03 10:20:04.347 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:04.403 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:04.632 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:04.635 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":125,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_125_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:04.742 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 126
2025-08-03 10:20:04.742 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 126
2025-08-03 10:20:04.742 [Thd =64]  Info Default  开始扫描条带； [126/261]
2025-08-03 10:20:04.754 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:20:04.757 [Thd =70]  Info Default CaptureBeginX: 70.08787, CaptureBeginY:3.45848, CaptureEndX:-70.06101, CaptureEndY:3.45848, VectorBeginX:71.65276, VectorBeginY:3.45848, VectorEndX:-72.01750, VectorEndY:3.45848, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:20:04.757 [Thd =70]  Info Default ***row:126, vectorBeginX:71.653, vectorBeginY:3.458, captureBeginX:70.088, captureBeginY:3.458, captureEndX:-70.061, captureEndY:3.458, vectorEndX:-72.018, vectorEndY:3.458
2025-08-03 10:20:04.757 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:04.759 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0878678017867,EndPoint:70.0610133920905
2025-08-03 10:20:05.108 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:05.111 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":125,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_125_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:05.651 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:05
2025-08-03 10:20:05.664 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:05
2025-08-03 10:20:09.604 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:126
2025-08-03 10:20:09.604 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:126,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:09.604 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:09.606 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:126
2025-08-03 10:20:09.606 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:126,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:09.606 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:126,source_light_Type:A_SourceLightType
2025-08-03 10:20:09.606 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:126,source_light_Type:B_SourceLightType
2025-08-03 10:20:09.606 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：126,A_SourceLightType
2025-08-03 10:20:09.607 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：126,B_SourceLightType
2025-08-03 10:20:09.776 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;126/261,
2025-08-03 10:20:09.786 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:09.849 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:10.069 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:10.071 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":126,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_126_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:10.194 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 127
2025-08-03 10:20:10.194 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 127
2025-08-03 10:20:10.194 [Thd =35]  Info Default  开始扫描条带； [127/261]
2025-08-03 10:20:10.203 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:20:10.206 [Thd =70]  Info Default ***row:127, vectorBeginX:-72.017, vectorBeginY:3.030, captureBeginX:-70.398, captureBeginY:3.030, captureEndX:69.750, captureEndY:3.030, vectorEndX:71.653, vectorEndY:3.030
2025-08-03 10:20:10.206 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:10.207 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3984174272545,EndPoint:-69.7504637666228
2025-08-03 10:20:10.545 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:10.548 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":126,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_126_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:11.185 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:11
2025-08-03 10:20:11.197 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:11
2025-08-03 10:20:15.053 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:127
2025-08-03 10:20:15.053 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:127,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:15.054 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:15.056 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:127
2025-08-03 10:20:15.056 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:127,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:15.056 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:127,source_light_Type:A_SourceLightType
2025-08-03 10:20:15.056 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:127,source_light_Type:B_SourceLightType
2025-08-03 10:20:15.056 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：127,A_SourceLightType
2025-08-03 10:20:15.056 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：127,B_SourceLightType
2025-08-03 10:20:15.227 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;127/261,
2025-08-03 10:20:15.236 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:15.276 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:15.516 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:15.518 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":127,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_127_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:15.616 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 128
2025-08-03 10:20:15.616 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 128
2025-08-03 10:20:15.616 [Thd =47]  Info Default  开始扫描条带； [128/261]
2025-08-03 10:20:15.625 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:20:15.628 [Thd =70]  Info Default CaptureBeginX: 70.08790, CaptureBeginY:2.60185, CaptureEndX:-70.06098, CaptureEndY:2.60185, VectorBeginX:71.65280, VectorBeginY:2.60185, VectorEndX:-72.01747, VectorEndY:2.60185, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:20:15.628 [Thd =70]  Info Default ***row:128, vectorBeginX:71.653, vectorBeginY:2.602, captureBeginX:70.088, captureBeginY:2.602, captureEndX:-70.061, captureEndY:2.602, vectorEndX:-72.017, vectorEndY:2.602
2025-08-03 10:20:15.628 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:15.630 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.087904893126,EndPoint:70.0609763007512
2025-08-03 10:20:15.714 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:15
2025-08-03 10:20:15.727 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:15
2025-08-03 10:20:16.009 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:16.011 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":127,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_127_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:20.479 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:128
2025-08-03 10:20:20.479 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:128,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:20.479 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:20.481 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:128
2025-08-03 10:20:20.481 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:128,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:20.481 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:128,source_light_Type:A_SourceLightType
2025-08-03 10:20:20.481 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:128,source_light_Type:B_SourceLightType
2025-08-03 10:20:20.482 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：128,A_SourceLightType
2025-08-03 10:20:20.482 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：128,B_SourceLightType
2025-08-03 10:20:20.651 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;128/261,
2025-08-03 10:20:20.661 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:20.718 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:20.940 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:20.943 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":128,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_128_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:21.056 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 129
2025-08-03 10:20:21.056 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 129
2025-08-03 10:20:21.056 [Thd =53]  Info Default  开始扫描条带； [129/261]
2025-08-03 10:20:21.065 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:20:21.068 [Thd =70]  Info Default ***row:129, vectorBeginX:-72.017, vectorBeginY:2.174, captureBeginX:-70.398, captureBeginY:2.174, captureEndX:69.751, captureEndY:2.174, vectorEndX:71.653, vectorEndY:2.174
2025-08-03 10:20:21.068 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:21.070 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3983803359152,EndPoint:-69.7505008579621
2025-08-03 10:20:21.246 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:21
2025-08-03 10:20:21.263 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:21
2025-08-03 10:20:21.413 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:21.415 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":128,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_128_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:25.921 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:129
2025-08-03 10:20:25.921 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:129,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:25.921 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:25.923 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:129
2025-08-03 10:20:25.924 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:129,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:25.924 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:129,source_light_Type:A_SourceLightType
2025-08-03 10:20:25.924 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:129,source_light_Type:B_SourceLightType
2025-08-03 10:20:25.924 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：129,A_SourceLightType
2025-08-03 10:20:25.924 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：129,B_SourceLightType
2025-08-03 10:20:26.092 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;129/261,
2025-08-03 10:20:26.101 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:26.155 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:26.398 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:26.400 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":129,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_129_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:26.494 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 130
2025-08-03 10:20:26.494 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 130
2025-08-03 10:20:26.494 [Thd =68]  Info Default  开始扫描条带； [130/261]
2025-08-03 10:20:26.503 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:20:26.506 [Thd =70]  Info Default CaptureBeginX: 70.08794, CaptureBeginY:1.74523, CaptureEndX:-70.06094, CaptureEndY:1.74523, VectorBeginX:71.65283, VectorBeginY:1.74523, VectorEndX:-72.01743, VectorEndY:1.74523, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:20:26.506 [Thd =70]  Info Default ***row:130, vectorBeginX:71.653, vectorBeginY:1.745, captureBeginX:70.088, captureBeginY:1.745, captureEndX:-70.061, captureEndY:1.745, vectorEndX:-72.017, vectorEndY:1.745
2025-08-03 10:20:26.506 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:26.507 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0879419844653,EndPoint:70.060939209412
2025-08-03 10:20:26.874 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:26.876 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":129,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_129_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:27.283 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:27
2025-08-03 10:20:27.304 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:27
2025-08-03 10:20:31.352 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:130
2025-08-03 10:20:31.352 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:130,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:31.352 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:31.354 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:130
2025-08-03 10:20:31.354 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:130,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:31.355 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:130,source_light_Type:A_SourceLightType
2025-08-03 10:20:31.355 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:130,source_light_Type:B_SourceLightType
2025-08-03 10:20:31.355 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：130,A_SourceLightType
2025-08-03 10:20:31.355 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：130,B_SourceLightType
2025-08-03 10:20:31.530 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;130/261,
2025-08-03 10:20:31.540 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:31.582 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:31.813 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:31.815 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":130,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_130_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:31.928 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 131
2025-08-03 10:20:31.928 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 131
2025-08-03 10:20:31.928 [Thd =69]  Info Default  开始扫描条带； [131/261]
2025-08-03 10:20:31.937 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:20:31.940 [Thd =70]  Info Default ***row:131, vectorBeginX:-72.017, vectorBeginY:1.317, captureBeginX:-70.398, captureBeginY:1.317, captureEndX:69.751, captureEndY:1.317, vectorEndX:71.653, vectorEndY:1.317
2025-08-03 10:20:31.940 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:31.942 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3983432445759,EndPoint:-69.7505379493014
2025-08-03 10:20:32.286 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:32.289 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":130,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_130_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:33.324 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:33
2025-08-03 10:20:33.336 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:33
2025-08-03 10:20:36.790 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:131
2025-08-03 10:20:36.790 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:131,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:36.790 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:36.791 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:131
2025-08-03 10:20:36.791 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:131,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:36.791 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:131,source_light_Type:A_SourceLightType
2025-08-03 10:20:36.791 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:131,source_light_Type:B_SourceLightType
2025-08-03 10:20:36.791 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：131,A_SourceLightType
2025-08-03 10:20:36.791 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：131,B_SourceLightType
2025-08-03 10:20:36.958 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;131/261,
2025-08-03 10:20:36.968 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:37.030 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:37.253 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:37.256 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":131,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_131_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:37.351 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:37
2025-08-03 10:20:37.362 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:37
2025-08-03 10:20:37.377 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 132
2025-08-03 10:20:37.377 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 132
2025-08-03 10:20:37.377 [Thd =53]  Info Default  开始扫描条带； [132/261]
2025-08-03 10:20:37.386 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:20:37.389 [Thd =70]  Info Default CaptureBeginX: 70.08798, CaptureBeginY:0.88860, CaptureEndX:-70.06090, CaptureEndY:0.88860, VectorBeginX:71.65287, VectorBeginY:0.88860, VectorEndX:-72.01739, VectorEndY:0.88860, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:20:37.389 [Thd =70]  Info Default ***row:132, vectorBeginX:71.653, vectorBeginY:0.889, captureBeginX:70.088, captureBeginY:0.889, captureEndX:-70.061, captureEndY:0.889, vectorEndX:-72.017, vectorEndY:0.889
2025-08-03 10:20:37.389 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:37.391 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0879790758046,EndPoint:70.0609021180727
2025-08-03 10:20:37.729 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:37.731 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":131,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_131_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:42.236 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:132
2025-08-03 10:20:42.236 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:132,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:42.236 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:42.238 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:132
2025-08-03 10:20:42.239 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:132,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:42.239 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:132,source_light_Type:A_SourceLightType
2025-08-03 10:20:42.239 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:132,source_light_Type:B_SourceLightType
2025-08-03 10:20:42.239 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：132,A_SourceLightType
2025-08-03 10:20:42.239 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：132,B_SourceLightType
2025-08-03 10:20:42.418 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;132/261,
2025-08-03 10:20:42.430 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:42.474 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:42.697 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:42.699 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":132,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_132_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:42.820 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 133
2025-08-03 10:20:42.820 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 133
2025-08-03 10:20:42.820 [Thd =5]  Info Default  开始扫描条带； [133/261]
2025-08-03 10:20:42.831 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:20:42.834 [Thd =70]  Info Default ***row:133, vectorBeginX:-72.017, vectorBeginY:0.460, captureBeginX:-70.398, captureBeginY:0.460, captureEndX:69.751, captureEndY:0.460, vectorEndX:71.653, vectorEndY:0.460
2025-08-03 10:20:42.834 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:42.835 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3983061532366,EndPoint:-69.7505750406407
2025-08-03 10:20:43.168 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:43.174 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":132,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_132_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:44.384 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:44
2025-08-03 10:20:44.397 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:44
2025-08-03 10:20:47.682 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:133
2025-08-03 10:20:47.682 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:133,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:47.682 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:47.684 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:133
2025-08-03 10:20:47.684 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:133,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:47.684 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:133,source_light_Type:A_SourceLightType
2025-08-03 10:20:47.684 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:133,source_light_Type:B_SourceLightType
2025-08-03 10:20:47.684 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：133,A_SourceLightType
2025-08-03 10:20:47.685 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：133,B_SourceLightType
2025-08-03 10:20:47.862 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;133/261,
2025-08-03 10:20:47.871 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:47.961 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:48.142 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:48.144 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":133,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_133_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:48.296 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 134
2025-08-03 10:20:48.296 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 134
2025-08-03 10:20:48.296 [Thd =68]  Info Default  开始扫描条带； [134/261]
2025-08-03 10:20:48.304 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:20:48.307 [Thd =70]  Info Default CaptureBeginX: 70.08802, CaptureBeginY:0.03198, CaptureEndX:-70.06087, CaptureEndY:0.03198, VectorBeginX:71.65291, VectorBeginY:0.03198, VectorEndX:-72.01735, VectorEndY:0.03198, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:20:48.307 [Thd =70]  Info Default ***row:134, vectorBeginX:71.653, vectorBeginY:0.032, captureBeginX:70.088, captureBeginY:0.032, captureEndX:-70.061, captureEndY:0.032, vectorEndX:-72.017, vectorEndY:0.032
2025-08-03 10:20:48.307 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:48.309 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0880161671439,EndPoint:70.0608650267334
2025-08-03 10:20:48.609 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:48.611 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":133,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_133_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:49.415 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:49
2025-08-03 10:20:49.424 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:49
2025-08-03 10:20:53.155 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:134
2025-08-03 10:20:53.155 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:134,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:53.155 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:53.157 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:134
2025-08-03 10:20:53.157 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:134,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:53.157 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:134,source_light_Type:A_SourceLightType
2025-08-03 10:20:53.157 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:134,source_light_Type:B_SourceLightType
2025-08-03 10:20:53.157 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：134,A_SourceLightType
2025-08-03 10:20:53.158 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：134,B_SourceLightType
2025-08-03 10:20:53.328 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;134/261,
2025-08-03 10:20:53.337 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:53.390 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:53.620 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:53.622 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":134,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_134_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:53.724 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 135
2025-08-03 10:20:53.724 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 135
2025-08-03 10:20:53.724 [Thd =5]  Info Default  开始扫描条带； [135/261]
2025-08-03 10:20:53.736 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:20:53.739 [Thd =70]  Info Default ***row:135, vectorBeginX:-72.017, vectorBeginY:-0.396, captureBeginX:-70.398, captureBeginY:-0.396, captureEndX:69.751, captureEndY:-0.396, vectorEndX:71.653, vectorEndY:-0.396
2025-08-03 10:20:53.739 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:53.741 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3982690618973,EndPoint:-69.7506121319799
2025-08-03 10:20:54.099 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:54.101 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":134,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_134_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:54.944 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:54
2025-08-03 10:20:54.956 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:54
2025-08-03 10:20:58.590 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:135
2025-08-03 10:20:58.590 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:135,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:58.590 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:20:58.592 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:135
2025-08-03 10:20:58.592 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:135,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:20:58.592 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:135,source_light_Type:A_SourceLightType
2025-08-03 10:20:58.592 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:135,source_light_Type:B_SourceLightType
2025-08-03 10:20:58.592 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：135,A_SourceLightType
2025-08-03 10:20:58.592 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：135,B_SourceLightType
2025-08-03 10:20:58.769 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;135/261,
2025-08-03 10:20:58.777 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:20:58.820 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:20:59.050 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:20:59.053 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":135,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_135_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:20:59.166 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 136
2025-08-03 10:20:59.166 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 136
2025-08-03 10:20:59.166 [Thd =35]  Info Default  开始扫描条带； [136/261]
2025-08-03 10:20:59.177 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:20:59.180 [Thd =70]  Info Default CaptureBeginX: 70.08805, CaptureBeginY:-0.82465, CaptureEndX:-70.06083, CaptureEndY:-0.82465, VectorBeginX:71.65294, VectorBeginY:-0.82465, VectorEndX:-72.01732, VectorEndY:-0.82465, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:20:59.180 [Thd =70]  Info Default ***row:136, vectorBeginX:71.653, vectorBeginY:-0.825, captureBeginX:70.088, captureBeginY:-0.825, captureEndX:-70.061, captureEndY:-0.825, vectorEndX:-72.017, vectorEndY:-0.825
2025-08-03 10:20:59.180 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:20:59.181 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0880532584832,EndPoint:70.0608279353941
2025-08-03 10:20:59.471 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:20:59
2025-08-03 10:20:59.480 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:20:59
2025-08-03 10:20:59.525 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:20:59.528 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":135,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_135_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:04.029 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:136
2025-08-03 10:21:04.029 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:136,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:04.029 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:04.030 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:136
2025-08-03 10:21:04.031 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:136,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:04.031 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:136,source_light_Type:A_SourceLightType
2025-08-03 10:21:04.031 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:136,source_light_Type:B_SourceLightType
2025-08-03 10:21:04.031 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：136,A_SourceLightType
2025-08-03 10:21:04.031 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：136,B_SourceLightType
2025-08-03 10:21:04.206 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;136/261,
2025-08-03 10:21:04.215 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:04.254 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:04.497 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:04.501 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":136,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_136_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:04.598 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 137
2025-08-03 10:21:04.598 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 137
2025-08-03 10:21:04.598 [Thd =47]  Info Default  开始扫描条带； [137/261]
2025-08-03 10:21:04.607 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:21:04.610 [Thd =70]  Info Default ***row:137, vectorBeginX:-72.017, vectorBeginY:-1.253, captureBeginX:-70.398, captureBeginY:-1.253, captureEndX:69.751, captureEndY:-1.253, vectorEndX:71.653, vectorEndY:-1.253
2025-08-03 10:21:04.610 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:04.612 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.398231970558,EndPoint:-69.7506492233192
2025-08-03 10:21:04.972 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:04.974 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":136,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_136_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:06.002 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:06
2025-08-03 10:21:06.022 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:06
2025-08-03 10:21:09.459 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:137
2025-08-03 10:21:09.459 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:137,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:09.459 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:09.461 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:137
2025-08-03 10:21:09.462 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:137,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:09.462 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:137,source_light_Type:A_SourceLightType
2025-08-03 10:21:09.462 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:137,source_light_Type:B_SourceLightType
2025-08-03 10:21:09.462 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：137,A_SourceLightType
2025-08-03 10:21:09.462 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：137,B_SourceLightType
2025-08-03 10:21:09.639 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;137/261,
2025-08-03 10:21:09.648 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:09.698 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:09.951 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:09.954 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":137,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_137_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:10.035 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 138
2025-08-03 10:21:10.035 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 138
2025-08-03 10:21:10.035 [Thd =68]  Info Default  开始扫描条带； [138/261]
2025-08-03 10:21:10.044 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:21:10.047 [Thd =70]  Info Default CaptureBeginX: 70.08809, CaptureBeginY:-1.68127, CaptureEndX:-70.06079, CaptureEndY:-1.68127, VectorBeginX:71.65298, VectorBeginY:-1.68127, VectorEndX:-72.01728, VectorEndY:-1.68127, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:21:10.047 [Thd =70]  Info Default ***row:138, vectorBeginX:71.653, vectorBeginY:-1.681, captureBeginX:70.088, captureBeginY:-1.681, captureEndX:-70.061, captureEndY:-1.681, vectorEndX:-72.017, vectorEndY:-1.681
2025-08-03 10:21:10.047 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:10.048 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0880903498225,EndPoint:70.0607908440548
2025-08-03 10:21:10.422 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:10.425 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":137,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_137_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:10.539 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:10
2025-08-03 10:21:10.564 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:10
2025-08-03 10:21:14.893 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:138
2025-08-03 10:21:14.893 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:138,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:14.893 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:14.895 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:138
2025-08-03 10:21:14.895 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:138,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:14.895 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:138,source_light_Type:A_SourceLightType
2025-08-03 10:21:14.895 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:138,source_light_Type:B_SourceLightType
2025-08-03 10:21:14.895 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：138,A_SourceLightType
2025-08-03 10:21:14.896 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：138,B_SourceLightType
2025-08-03 10:21:15.072 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;138/261,
2025-08-03 10:21:15.082 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:15.145 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:15.357 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:15.359 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":138,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_138_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:15.482 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 139
2025-08-03 10:21:15.482 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 139
2025-08-03 10:21:15.482 [Thd =46]  Info Default  开始扫描条带； [139/261]
2025-08-03 10:21:15.499 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:21:15.501 [Thd =70]  Info Default ***row:139, vectorBeginX:-72.017, vectorBeginY:-2.110, captureBeginX:-70.398, captureBeginY:-2.110, captureEndX:69.751, captureEndY:-2.110, vectorEndX:71.653, vectorEndY:-2.110
2025-08-03 10:21:15.502 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:15.504 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3981948792187,EndPoint:-69.7506863146585
2025-08-03 10:21:15.828 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:15.831 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":138,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_138_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:16.585 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:16
2025-08-03 10:21:16.597 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:16
2025-08-03 10:21:20.354 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:139
2025-08-03 10:21:20.354 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:139,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:20.354 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:20.354 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:139
2025-08-03 10:21:20.354 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:139,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:20.354 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:139,source_light_Type:A_SourceLightType
2025-08-03 10:21:20.355 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:139,source_light_Type:B_SourceLightType
2025-08-03 10:21:20.355 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：139,A_SourceLightType
2025-08-03 10:21:20.355 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：139,B_SourceLightType
2025-08-03 10:21:20.523 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;139/261,
2025-08-03 10:21:20.533 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:20.640 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:20.814 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:20.817 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":139,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_139_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:20.975 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 140
2025-08-03 10:21:20.975 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 140
2025-08-03 10:21:20.975 [Thd =56]  Info Default  开始扫描条带； [140/261]
2025-08-03 10:21:20.987 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:21:20.990 [Thd =70]  Info Default CaptureBeginX: 70.08813, CaptureBeginY:-2.53790, CaptureEndX:-70.06075, CaptureEndY:-2.53790, VectorBeginX:71.65302, VectorBeginY:-2.53790, VectorEndX:-72.01724, VectorEndY:-2.53790, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:21:20.990 [Thd =70]  Info Default ***row:140, vectorBeginX:71.653, vectorBeginY:-2.538, captureBeginX:70.088, captureBeginY:-2.538, captureEndX:-70.061, captureEndY:-2.538, vectorEndX:-72.017, vectorEndY:-2.538
2025-08-03 10:21:20.990 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:20.991 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0881274411617,EndPoint:70.0607537527155
2025-08-03 10:21:21.287 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:21.290 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":139,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_139_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:21.613 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:21
2025-08-03 10:21:21.624 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:21
2025-08-03 10:21:25.838 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:140
2025-08-03 10:21:25.839 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:140,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:25.839 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:25.839 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:140
2025-08-03 10:21:25.840 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:140,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:25.840 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:140,source_light_Type:A_SourceLightType
2025-08-03 10:21:25.840 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:140,source_light_Type:B_SourceLightType
2025-08-03 10:21:25.840 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：140,A_SourceLightType
2025-08-03 10:21:25.840 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：140,B_SourceLightType
2025-08-03 10:21:26.015 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;140/261,
2025-08-03 10:21:26.025 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:26.084 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:26.301 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:26.303 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":140,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_140_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:26.419 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 141
2025-08-03 10:21:26.419 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 141
2025-08-03 10:21:26.419 [Thd =5]  Info Default  开始扫描条带； [141/261]
2025-08-03 10:21:26.436 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:21:26.439 [Thd =70]  Info Default ***row:141, vectorBeginX:-72.017, vectorBeginY:-2.966, captureBeginX:-70.398, captureBeginY:-2.966, captureEndX:69.751, captureEndY:-2.966, vectorEndX:71.653, vectorEndY:-2.966
2025-08-03 10:21:26.439 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:26.441 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3981577878794,EndPoint:-69.7507234059978
2025-08-03 10:21:26.786 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:26.789 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":140,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_140_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:27.645 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:27
2025-08-03 10:21:27.658 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:27
2025-08-03 10:21:31.287 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:141
2025-08-03 10:21:31.287 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:141,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:31.287 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:31.289 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:141
2025-08-03 10:21:31.289 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:141,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:31.289 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:141,source_light_Type:A_SourceLightType
2025-08-03 10:21:31.289 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:141,source_light_Type:B_SourceLightType
2025-08-03 10:21:31.290 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：141,A_SourceLightType
2025-08-03 10:21:31.290 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：141,B_SourceLightType
2025-08-03 10:21:31.462 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;141/261,
2025-08-03 10:21:31.471 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:31.506 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:31.746 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:31.749 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":141,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_141_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:31.851 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 142
2025-08-03 10:21:31.851 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 142
2025-08-03 10:21:31.851 [Thd =47]  Info Default  开始扫描条带； [142/261]
2025-08-03 10:21:31.859 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:21:31.862 [Thd =70]  Info Default CaptureBeginX: 70.08816, CaptureBeginY:-3.39452, CaptureEndX:-70.06072, CaptureEndY:-3.39452, VectorBeginX:71.65305, VectorBeginY:-3.39452, VectorEndX:-72.01721, VectorEndY:-3.39452, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:21:31.862 [Thd =70]  Info Default ***row:142, vectorBeginX:71.653, vectorBeginY:-3.395, captureBeginX:70.088, captureBeginY:-3.395, captureEndX:-70.061, captureEndY:-3.395, vectorEndX:-72.017, vectorEndY:-3.395
2025-08-03 10:21:31.862 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:31.864 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.088164532501,EndPoint:70.0607166613762
2025-08-03 10:21:32.257 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:32.260 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":141,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_141_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:32.676 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:32
2025-08-03 10:21:32.695 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:32
2025-08-03 10:21:36.710 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:142
2025-08-03 10:21:36.710 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:142,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:36.710 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:36.711 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:142
2025-08-03 10:21:36.711 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:142,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:36.711 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:142,source_light_Type:A_SourceLightType
2025-08-03 10:21:36.711 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:142,source_light_Type:B_SourceLightType
2025-08-03 10:21:36.711 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：142,A_SourceLightType
2025-08-03 10:21:36.711 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：142,B_SourceLightType
2025-08-03 10:21:36.891 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;142/261,
2025-08-03 10:21:36.900 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:37.008 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:37.172 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:37.175 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":142,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_142_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:37.353 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 143
2025-08-03 10:21:37.353 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 143
2025-08-03 10:21:37.353 [Thd =68]  Info Default  开始扫描条带； [143/261]
2025-08-03 10:21:37.365 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:21:37.368 [Thd =70]  Info Default ***row:143, vectorBeginX:-72.017, vectorBeginY:-3.823, captureBeginX:-70.398, captureBeginY:-3.823, captureEndX:69.751, captureEndY:-3.823, vectorEndX:71.653, vectorEndY:-3.823
2025-08-03 10:21:37.368 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:37.369 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3981206965401,EndPoint:-69.7507604973371
2025-08-03 10:21:37.641 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:37.643 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":142,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_142_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:38.716 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:38
2025-08-03 10:21:38.740 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:38
2025-08-03 10:21:42.216 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:143
2025-08-03 10:21:42.217 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:143,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:42.217 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:42.219 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:143
2025-08-03 10:21:42.219 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:143,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:42.219 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:143,source_light_Type:A_SourceLightType
2025-08-03 10:21:42.219 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:143,source_light_Type:B_SourceLightType
2025-08-03 10:21:42.220 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：143,A_SourceLightType
2025-08-03 10:21:42.220 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：143,B_SourceLightType
2025-08-03 10:21:42.387 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;143/261,
2025-08-03 10:21:42.397 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:42.437 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:42.679 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:42.681 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":143,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_143_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:42.773 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 144
2025-08-03 10:21:42.773 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 144
2025-08-03 10:21:42.773 [Thd =56]  Info Default  开始扫描条带； [144/261]
2025-08-03 10:21:42.782 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:21:42.785 [Thd =70]  Info Default CaptureBeginX: 70.08820, CaptureBeginY:-4.25115, CaptureEndX:-70.06068, CaptureEndY:-4.25115, VectorBeginX:71.65309, VectorBeginY:-4.25115, VectorEndX:-72.01717, VectorEndY:-4.25115, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:21:42.785 [Thd =70]  Info Default ***row:144, vectorBeginX:71.653, vectorBeginY:-4.251, captureBeginX:70.088, captureBeginY:-4.251, captureEndX:-70.061, captureEndY:-4.251, vectorEndX:-72.017, vectorEndY:-4.251
2025-08-03 10:21:42.785 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:42.787 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0882016238403,EndPoint:70.0606795700369
2025-08-03 10:21:43.158 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:43.160 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":143,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_143_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:43.259 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:43
2025-08-03 10:21:43.274 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:43
2025-08-03 10:21:47.631 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:144
2025-08-03 10:21:47.632 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:144,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:47.632 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:47.634 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:144
2025-08-03 10:21:47.634 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:144,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:47.634 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:144,source_light_Type:A_SourceLightType
2025-08-03 10:21:47.634 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:144,source_light_Type:B_SourceLightType
2025-08-03 10:21:47.634 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：144,A_SourceLightType
2025-08-03 10:21:47.634 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：144,B_SourceLightType
2025-08-03 10:21:47.814 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;144/261,
2025-08-03 10:21:47.823 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:47.876 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:48.095 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:48.097 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":144,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_144_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:48.211 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 145
2025-08-03 10:21:48.211 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 145
2025-08-03 10:21:48.211 [Thd =47]  Info Default  开始扫描条带； [145/261]
2025-08-03 10:21:48.220 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:21:48.223 [Thd =70]  Info Default ***row:145, vectorBeginX:-72.017, vectorBeginY:-4.679, captureBeginX:-70.398, captureBeginY:-4.679, captureEndX:69.751, captureEndY:-4.679, vectorEndX:71.653, vectorEndY:-4.679
2025-08-03 10:21:48.223 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:48.225 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3980836052008,EndPoint:-69.7507975886764
2025-08-03 10:21:48.568 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:48.571 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":144,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_144_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:49.293 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:49
2025-08-03 10:21:49.313 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:49
2025-08-03 10:21:53.071 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:145
2025-08-03 10:21:53.072 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:145,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:53.072 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:53.074 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:145
2025-08-03 10:21:53.074 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:145,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:53.074 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:145,source_light_Type:A_SourceLightType
2025-08-03 10:21:53.074 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:145,source_light_Type:B_SourceLightType
2025-08-03 10:21:53.074 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：145,A_SourceLightType
2025-08-03 10:21:53.075 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：145,B_SourceLightType
2025-08-03 10:21:53.244 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;145/261,
2025-08-03 10:21:53.253 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:53.348 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:53.533 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:53.536 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":145,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_145_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:53.694 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 146
2025-08-03 10:21:53.694 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 146
2025-08-03 10:21:53.694 [Thd =23]  Info Default  开始扫描条带； [146/261]
2025-08-03 10:21:53.703 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:21:53.705 [Thd =70]  Info Default CaptureBeginX: 70.08824, CaptureBeginY:-5.10777, CaptureEndX:-70.06064, CaptureEndY:-5.10777, VectorBeginX:71.65313, VectorBeginY:-5.10777, VectorEndX:-72.01713, VectorEndY:-5.10777, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:21:53.705 [Thd =70]  Info Default ***row:146, vectorBeginX:71.653, vectorBeginY:-5.108, captureBeginX:70.088, captureBeginY:-5.108, captureEndX:-70.061, captureEndY:-5.108, vectorEndX:-72.017, vectorEndY:-5.108
2025-08-03 10:21:53.706 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:53.708 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0882387151796,EndPoint:70.0606424786976
2025-08-03 10:21:54.006 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:54.009 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":145,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_145_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:54.331 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:21:54
2025-08-03 10:21:54.349 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:21:54
2025-08-03 10:21:58.552 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:146
2025-08-03 10:21:58.552 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:146,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:58.552 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:21:58.554 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:146
2025-08-03 10:21:58.554 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:146,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:21:58.555 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:146,source_light_Type:A_SourceLightType
2025-08-03 10:21:58.555 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:146,source_light_Type:B_SourceLightType
2025-08-03 10:21:58.555 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：146,A_SourceLightType
2025-08-03 10:21:58.555 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：146,B_SourceLightType
2025-08-03 10:21:58.725 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;146/261,
2025-08-03 10:21:58.734 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:21:58.805 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:21:59.013 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:21:59.014 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":146,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_146_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:21:59.141 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 147
2025-08-03 10:21:59.141 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 147
2025-08-03 10:21:59.141 [Thd =53]  Info Default  开始扫描条带； [147/261]
2025-08-03 10:21:59.150 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:21:59.153 [Thd =70]  Info Default ***row:147, vectorBeginX:-72.017, vectorBeginY:-5.536, captureBeginX:-70.398, captureBeginY:-5.536, captureEndX:69.751, captureEndY:-5.536, vectorEndX:71.653, vectorEndY:-5.536
2025-08-03 10:21:59.153 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:21:59.155 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3980465138615,EndPoint:-69.7508346800157
2025-08-03 10:21:59.486 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:21:59.489 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":146,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_146_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:00.370 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:00
2025-08-03 10:22:00.383 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:00
2025-08-03 10:22:04.007 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:147
2025-08-03 10:22:04.007 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:147,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:04.007 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:04.010 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:147
2025-08-03 10:22:04.010 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:147,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:04.010 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:147,source_light_Type:A_SourceLightType
2025-08-03 10:22:04.010 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:147,source_light_Type:B_SourceLightType
2025-08-03 10:22:04.010 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：147,A_SourceLightType
2025-08-03 10:22:04.010 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：147,B_SourceLightType
2025-08-03 10:22:04.187 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;147/261,
2025-08-03 10:22:04.196 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:04.253 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:04.396 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:04
2025-08-03 10:22:04.414 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:04
2025-08-03 10:22:04.472 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:04.474 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":147,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_147_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:04.591 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 148
2025-08-03 10:22:04.591 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 148
2025-08-03 10:22:04.591 [Thd =23]  Info Default  开始扫描条带； [148/261]
2025-08-03 10:22:04.600 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:22:04.603 [Thd =70]  Info Default CaptureBeginX: 70.08828, CaptureBeginY:-5.96440, CaptureEndX:-70.06061, CaptureEndY:-5.96440, VectorBeginX:71.65317, VectorBeginY:-5.96440, VectorEndX:-72.01709, VectorEndY:-5.96440, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:22:04.603 [Thd =70]  Info Default ***row:148, vectorBeginX:71.653, vectorBeginY:-5.964, captureBeginX:70.088, captureBeginY:-5.964, captureEndX:-70.061, captureEndY:-5.964, vectorEndX:-72.017, vectorEndY:-5.964
2025-08-03 10:22:04.603 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:04.605 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0882758065189,EndPoint:70.0606053873583
2025-08-03 10:22:04.944 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:04.946 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":147,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_147_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:09.452 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:148
2025-08-03 10:22:09.452 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:148,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:09.452 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:09.454 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:148
2025-08-03 10:22:09.454 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:148,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:09.455 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:148,source_light_Type:A_SourceLightType
2025-08-03 10:22:09.455 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:148,source_light_Type:B_SourceLightType
2025-08-03 10:22:09.455 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：148,A_SourceLightType
2025-08-03 10:22:09.455 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：148,B_SourceLightType
2025-08-03 10:22:09.626 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;148/261,
2025-08-03 10:22:09.635 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:09.687 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:09.910 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:09.912 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":148,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_148_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:10.056 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 149
2025-08-03 10:22:10.056 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 149
2025-08-03 10:22:10.056 [Thd =6]  Info Default  开始扫描条带； [149/261]
2025-08-03 10:22:10.065 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:22:10.068 [Thd =70]  Info Default ***row:149, vectorBeginX:-72.017, vectorBeginY:-6.393, captureBeginX:-70.398, captureBeginY:-6.393, captureEndX:69.751, captureEndY:-6.393, vectorEndX:71.653, vectorEndY:-6.393
2025-08-03 10:22:10.068 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:10.070 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3980094225222,EndPoint:-69.750871771355
2025-08-03 10:22:10.380 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:10.383 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":148,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_148_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:11.437 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:11
2025-08-03 10:22:11.449 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:11
2025-08-03 10:22:14.916 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:149
2025-08-03 10:22:14.917 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:149,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:14.917 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:14.919 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:149
2025-08-03 10:22:14.919 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:149,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:14.919 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:149,source_light_Type:A_SourceLightType
2025-08-03 10:22:14.919 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:149,source_light_Type:B_SourceLightType
2025-08-03 10:22:14.919 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：149,A_SourceLightType
2025-08-03 10:22:14.919 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：149,B_SourceLightType
2025-08-03 10:22:15.098 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;149/261,
2025-08-03 10:22:15.107 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:15.153 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:15.377 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:15.379 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":149,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_149_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:15.497 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 150
2025-08-03 10:22:15.497 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 150
2025-08-03 10:22:15.497 [Thd =35]  Info Default  开始扫描条带； [150/261]
2025-08-03 10:22:15.506 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:22:15.508 [Thd =70]  Info Default CaptureBeginX: 70.08831, CaptureBeginY:-6.82103, CaptureEndX:-70.06057, CaptureEndY:-6.82103, VectorBeginX:71.65320, VectorBeginY:-6.82103, VectorEndX:-72.01706, VectorEndY:-6.82103, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:22:15.511 [Thd =70]  Info Default ***row:150, vectorBeginX:71.653, vectorBeginY:-6.821, captureBeginX:70.088, captureBeginY:-6.821, captureEndX:-70.061, captureEndY:-6.821, vectorEndX:-72.017, vectorEndY:-6.821
2025-08-03 10:22:15.511 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:15.513 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0883128978582,EndPoint:70.060568296019
2025-08-03 10:22:15.854 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:15.857 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":149,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_149_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:16.467 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:16
2025-08-03 10:22:16.478 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:16
2025-08-03 10:22:20.359 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:150
2025-08-03 10:22:20.359 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:150,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:20.359 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:20.360 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:150
2025-08-03 10:22:20.360 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:150,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:20.360 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:150,source_light_Type:A_SourceLightType
2025-08-03 10:22:20.360 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:150,source_light_Type:B_SourceLightType
2025-08-03 10:22:20.360 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：150,A_SourceLightType
2025-08-03 10:22:20.360 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：150,B_SourceLightType
2025-08-03 10:22:20.529 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;150/261,
2025-08-03 10:22:20.539 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:20.575 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:20.827 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:20.832 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":150,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_150_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:20.922 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 151
2025-08-03 10:22:20.922 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 151
2025-08-03 10:22:20.922 [Thd =23]  Info Default  开始扫描条带； [151/261]
2025-08-03 10:22:20.938 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:22:20.941 [Thd =70]  Info Default ***row:151, vectorBeginX:-72.017, vectorBeginY:-7.249, captureBeginX:-70.398, captureBeginY:-7.249, captureEndX:69.751, captureEndY:-7.249, vectorEndX:71.653, vectorEndY:-7.249
2025-08-03 10:22:20.941 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:20.942 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3979723311829,EndPoint:-69.7509088626943
2025-08-03 10:22:21.304 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:21.306 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":150,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_150_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:22.999 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:22
2025-08-03 10:22:23.014 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:23
2025-08-03 10:22:25.788 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:151
2025-08-03 10:22:25.789 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:151,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:25.789 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:25.791 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:151
2025-08-03 10:22:25.791 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:151,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:25.791 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:151,source_light_Type:A_SourceLightType
2025-08-03 10:22:25.791 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：151,A_SourceLightType
2025-08-03 10:22:25.792 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：151,B_SourceLightType
2025-08-03 10:22:25.792 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:151,source_light_Type:B_SourceLightType
2025-08-03 10:22:25.960 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;151/261,
2025-08-03 10:22:25.969 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:26.008 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:26.249 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:26.252 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":151,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_151_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:26.353 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 152
2025-08-03 10:22:26.353 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 152
2025-08-03 10:22:26.353 [Thd =47]  Info Default  开始扫描条带； [152/261]
2025-08-03 10:22:26.365 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:22:26.367 [Thd =70]  Info Default CaptureBeginX: 70.08835, CaptureBeginY:-7.67765, CaptureEndX:-70.06053, CaptureEndY:-7.67765, VectorBeginX:71.65324, VectorBeginY:-7.67765, VectorEndX:-72.01702, VectorEndY:-7.67765, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:22:26.368 [Thd =70]  Info Default ***row:152, vectorBeginX:71.653, vectorBeginY:-7.678, captureBeginX:70.088, captureBeginY:-7.678, captureEndX:-70.061, captureEndY:-7.678, vectorEndX:-72.017, vectorEndY:-7.678
2025-08-03 10:22:26.368 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:26.369 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0883499891975,EndPoint:70.0605312046797
2025-08-03 10:22:26.726 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:26.728 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":151,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_151_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:27.028 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:27
2025-08-03 10:22:27.048 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:27
2025-08-03 10:22:31.215 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:152
2025-08-03 10:22:31.215 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:152,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:31.215 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:31.217 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:152
2025-08-03 10:22:31.217 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:152,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:31.217 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:152,source_light_Type:A_SourceLightType
2025-08-03 10:22:31.217 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:152,source_light_Type:B_SourceLightType
2025-08-03 10:22:31.217 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：152,A_SourceLightType
2025-08-03 10:22:31.217 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：152,B_SourceLightType
2025-08-03 10:22:31.394 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;152/261,
2025-08-03 10:22:31.403 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:31.459 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:31.681 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:31.684 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":152,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_152_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:31.794 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 153
2025-08-03 10:22:31.794 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 153
2025-08-03 10:22:31.794 [Thd =57]  Info Default  开始扫描条带； [153/261]
2025-08-03 10:22:31.803 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:22:31.806 [Thd =70]  Info Default ***row:153, vectorBeginX:-72.017, vectorBeginY:-8.106, captureBeginX:-70.398, captureBeginY:-8.106, captureEndX:69.751, captureEndY:-8.106, vectorEndX:71.653, vectorEndY:-8.106
2025-08-03 10:22:31.806 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:31.808 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3979352398436,EndPoint:-69.7509459540336
2025-08-03 10:22:32.159 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:32.162 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":152,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_152_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:33.068 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:33
2025-08-03 10:22:33.080 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:33
2025-08-03 10:22:36.658 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:153
2025-08-03 10:22:36.659 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:153,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:36.659 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:36.659 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:153
2025-08-03 10:22:36.659 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:153,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:36.659 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:153,source_light_Type:A_SourceLightType
2025-08-03 10:22:36.659 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:153,source_light_Type:B_SourceLightType
2025-08-03 10:22:36.659 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：153,A_SourceLightType
2025-08-03 10:22:36.660 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：153,B_SourceLightType
2025-08-03 10:22:36.833 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;153/261,
2025-08-03 10:22:36.842 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:36.888 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:37.121 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:37.123 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":153,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_153_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:37.226 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 154
2025-08-03 10:22:37.226 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 154
2025-08-03 10:22:37.226 [Thd =57]  Info Default  开始扫描条带； [154/261]
2025-08-03 10:22:37.235 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:22:37.238 [Thd =70]  Info Default CaptureBeginX: 70.08839, CaptureBeginY:-8.53428, CaptureEndX:-70.06049, CaptureEndY:-8.53428, VectorBeginX:71.65328, VectorBeginY:-8.53428, VectorEndX:-72.01698, VectorEndY:-8.53428, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:22:37.238 [Thd =70]  Info Default ***row:154, vectorBeginX:71.653, vectorBeginY:-8.534, captureBeginX:70.088, captureBeginY:-8.534, captureEndX:-70.060, captureEndY:-8.534, vectorEndX:-72.017, vectorEndY:-8.534
2025-08-03 10:22:37.238 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:37.240 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0883870805368,EndPoint:70.0604941133404
2025-08-03 10:22:37.596 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:37.599 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":153,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_153_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:38.599 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:38
2025-08-03 10:22:38.614 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:38
2025-08-03 10:22:42.089 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:154
2025-08-03 10:22:42.089 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:154,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:42.090 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:42.164 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:154
2025-08-03 10:22:42.164 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:154,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:42.164 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:154,source_light_Type:B_SourceLightType
2025-08-03 10:22:42.165 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:154,source_light_Type:A_SourceLightType
2025-08-03 10:22:42.165 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：154,B_SourceLightType
2025-08-03 10:22:42.165 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：154,A_SourceLightType
2025-08-03 10:22:42.269 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;154/261,
2025-08-03 10:22:42.278 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:42.339 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:42.624 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:42.626 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":154,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_154_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:42.686 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 155
2025-08-03 10:22:42.686 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 155
2025-08-03 10:22:42.686 [Thd =59]  Info Default  开始扫描条带； [155/261]
2025-08-03 10:22:42.704 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:22:42.707 [Thd =70]  Info Default ***row:155, vectorBeginX:-72.017, vectorBeginY:-8.963, captureBeginX:-70.398, captureBeginY:-8.963, captureEndX:69.751, captureEndY:-8.963, vectorEndX:71.653, vectorEndY:-8.963
2025-08-03 10:22:42.707 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:42.709 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3978981485043,EndPoint:-69.7509830453729
2025-08-03 10:22:43.097 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:43.100 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":154,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_154_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:44.137 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:44
2025-08-03 10:22:44.149 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:44
2025-08-03 10:22:47.560 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:155
2025-08-03 10:22:47.560 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:155,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:47.560 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:47.562 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:155
2025-08-03 10:22:47.562 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:155,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:47.563 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:155,source_light_Type:A_SourceLightType
2025-08-03 10:22:47.563 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:155,source_light_Type:B_SourceLightType
2025-08-03 10:22:47.563 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：155,A_SourceLightType
2025-08-03 10:22:47.563 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：155,B_SourceLightType
2025-08-03 10:22:47.734 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;155/261,
2025-08-03 10:22:47.743 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:47.798 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:48.040 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:48.043 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":155,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_155_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:48.133 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 156
2025-08-03 10:22:48.133 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 156
2025-08-03 10:22:48.133 [Thd =66]  Info Default  开始扫描条带； [156/261]
2025-08-03 10:22:48.142 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:22:48.145 [Thd =70]  Info Default CaptureBeginX: 70.08842, CaptureBeginY:-9.39090, CaptureEndX:-70.06046, CaptureEndY:-9.39090, VectorBeginX:71.65331, VectorBeginY:-9.39090, VectorEndX:-72.01695, VectorEndY:-9.39090, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:22:48.145 [Thd =70]  Info Default ***row:156, vectorBeginX:71.653, vectorBeginY:-9.391, captureBeginX:70.088, captureBeginY:-9.391, captureEndX:-70.060, captureEndY:-9.391, vectorEndX:-72.017, vectorEndY:-9.391
2025-08-03 10:22:48.145 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:48.148 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0884241718761,EndPoint:70.0604570220011
2025-08-03 10:22:48.163 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:48
2025-08-03 10:22:48.174 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:48
2025-08-03 10:22:48.515 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:48.517 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":155,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_155_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:52.994 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:156
2025-08-03 10:22:52.994 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:156,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:52.994 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:52.996 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:156
2025-08-03 10:22:52.997 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:156,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:52.997 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:156,source_light_Type:A_SourceLightType
2025-08-03 10:22:52.997 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:156,source_light_Type:B_SourceLightType
2025-08-03 10:22:52.997 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：156,A_SourceLightType
2025-08-03 10:22:52.997 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：156,B_SourceLightType
2025-08-03 10:22:53.175 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;156/261,
2025-08-03 10:22:53.184 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:53.235 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:53.455 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:53.457 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":156,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_156_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:53.578 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 157
2025-08-03 10:22:53.578 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 157
2025-08-03 10:22:53.578 [Thd =69]  Info Default  开始扫描条带； [157/261]
2025-08-03 10:22:53.587 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:22:53.590 [Thd =70]  Info Default ***row:157, vectorBeginX:-72.017, vectorBeginY:-9.819, captureBeginX:-70.398, captureBeginY:-9.819, captureEndX:69.751, captureEndY:-9.819, vectorEndX:71.653, vectorEndY:-9.819
2025-08-03 10:22:53.590 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:53.592 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.397861057165,EndPoint:-69.7510201367122
2025-08-03 10:22:53.929 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:53.932 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":156,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_156_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:54.194 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:54
2025-08-03 10:22:54.213 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:54
2025-08-03 10:22:58.441 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:157
2025-08-03 10:22:58.441 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:157,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:58.441 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:22:58.443 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:157
2025-08-03 10:22:58.443 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:157,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:22:58.443 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:157,source_light_Type:A_SourceLightType
2025-08-03 10:22:58.443 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:157,source_light_Type:B_SourceLightType
2025-08-03 10:22:58.443 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：157,A_SourceLightType
2025-08-03 10:22:58.443 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：157,B_SourceLightType
2025-08-03 10:22:58.615 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;157/261,
2025-08-03 10:22:58.624 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:22:58.664 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:22:58.900 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:22:58.902 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":157,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_157_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:58.999 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 158
2025-08-03 10:22:58.999 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 158
2025-08-03 10:22:58.999 [Thd =66]  Info Default  开始扫描条带； [158/261]
2025-08-03 10:22:59.008 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:22:59.011 [Thd =70]  Info Default CaptureBeginX: 70.08846, CaptureBeginY:-10.24753, CaptureEndX:-70.06042, CaptureEndY:-10.24753, VectorBeginX:71.65335, VectorBeginY:-10.24753, VectorEndX:-72.01691, VectorEndY:-10.24753, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:22:59.011 [Thd =70]  Info Default ***row:158, vectorBeginX:71.653, vectorBeginY:-10.248, captureBeginX:70.088, captureBeginY:-10.248, captureEndX:-70.060, captureEndY:-10.248, vectorEndX:-72.017, vectorEndY:-10.248
2025-08-03 10:22:59.011 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:22:59.012 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0884612632154,EndPoint:70.0604199306618
2025-08-03 10:22:59.375 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:22:59.377 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":157,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_157_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:22:59.731 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:22:59
2025-08-03 10:22:59.748 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:22:59
2025-08-03 10:23:03.856 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:158
2025-08-03 10:23:03.857 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:158,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:03.857 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:03.859 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:158
2025-08-03 10:23:03.859 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:158,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:03.859 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:158,source_light_Type:A_SourceLightType
2025-08-03 10:23:03.860 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:158,source_light_Type:B_SourceLightType
2025-08-03 10:23:03.860 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：158,A_SourceLightType
2025-08-03 10:23:03.860 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：158,B_SourceLightType
2025-08-03 10:23:04.030 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;158/261,
2025-08-03 10:23:04.040 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:23:04.092 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:23:04.319 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:23:04.321 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":158,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_158_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:04.428 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 159
2025-08-03 10:23:04.428 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 159
2025-08-03 10:23:04.428 [Thd =59]  Info Default  开始扫描条带； [159/261]
2025-08-03 10:23:04.437 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:23:04.440 [Thd =70]  Info Default ***row:159, vectorBeginX:-72.017, vectorBeginY:-10.676, captureBeginX:-70.398, captureBeginY:-10.676, captureEndX:69.751, captureEndY:-10.676, vectorEndX:71.653, vectorEndY:-10.676
2025-08-03 10:23:04.440 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:04.441 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3978239658258,EndPoint:-69.7510572280515
2025-08-03 10:23:04.796 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:23:04.798 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":158,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_158_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:06.271 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:23:06
2025-08-03 10:23:06.283 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:23:06
2025-08-03 10:23:09.287 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:159
2025-08-03 10:23:09.288 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:159,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:09.288 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:09.290 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:159
2025-08-03 10:23:09.290 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:159,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:09.290 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:159,source_light_Type:A_SourceLightType
2025-08-03 10:23:09.290 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:159,source_light_Type:B_SourceLightType
2025-08-03 10:23:09.290 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：159,A_SourceLightType
2025-08-03 10:23:09.291 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：159,B_SourceLightType
2025-08-03 10:23:09.464 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;159/261,
2025-08-03 10:23:09.473 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:23:09.536 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:23:09.746 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:23:09.749 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":159,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_159_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:09.882 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 160
2025-08-03 10:23:09.882 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 160
2025-08-03 10:23:09.882 [Thd =47]  Info Default  开始扫描条带； [160/261]
2025-08-03 10:23:09.896 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:23:09.899 [Thd =70]  Info Default CaptureBeginX: 70.08850, CaptureBeginY:-11.10415, CaptureEndX:-70.06038, CaptureEndY:-11.10415, VectorBeginX:71.65339, VectorBeginY:-11.10415, VectorEndX:-72.01687, VectorEndY:-11.10415, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:23:09.899 [Thd =70]  Info Default ***row:160, vectorBeginX:71.653, vectorBeginY:-11.104, captureBeginX:70.088, captureBeginY:-11.104, captureEndX:-70.060, captureEndY:-11.104, vectorEndX:-72.017, vectorEndY:-11.104
2025-08-03 10:23:09.899 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:09.901 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0884983545547,EndPoint:70.0603828393225
2025-08-03 10:23:10.247 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:23:10.255 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":159,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_159_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:10.297 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:23:10
2025-08-03 10:23:10.321 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:23:10
2025-08-03 10:23:14.752 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:160
2025-08-03 10:23:14.752 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:160,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:14.752 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:14.754 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:160
2025-08-03 10:23:14.754 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:160,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:14.754 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:160,source_light_Type:A_SourceLightType
2025-08-03 10:23:14.754 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:160,source_light_Type:B_SourceLightType
2025-08-03 10:23:14.754 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：160,A_SourceLightType
2025-08-03 10:23:14.755 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：160,B_SourceLightType
2025-08-03 10:23:14.935 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;160/261,
2025-08-03 10:23:14.944 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:23:14.996 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:23:15.216 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:23:15.218 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":160,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_160_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:15.341 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 161
2025-08-03 10:23:15.341 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 161
2025-08-03 10:23:15.341 [Thd =57]  Info Default  开始扫描条带； [161/261]
2025-08-03 10:23:15.350 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:23:15.353 [Thd =70]  Info Default ***row:161, vectorBeginX:-72.017, vectorBeginY:-11.532, captureBeginX:-70.398, captureBeginY:-11.532, captureEndX:69.751, captureEndY:-11.532, vectorEndX:71.653, vectorEndY:-11.532
2025-08-03 10:23:15.353 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:15.354 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3977868744865,EndPoint:-69.7510943193908
2025-08-03 10:23:15.695 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:23:15.697 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":160,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_160_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:16.843 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:23:16
2025-08-03 10:23:16.854 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:23:16
2025-08-03 10:23:20.203 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:161
2025-08-03 10:23:20.204 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:161,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:20.204 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:20.205 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:161
2025-08-03 10:23:20.205 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:161,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:20.205 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:161,source_light_Type:A_SourceLightType
2025-08-03 10:23:20.205 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：161,A_SourceLightType
2025-08-03 10:23:20.205 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：161,B_SourceLightType
2025-08-03 10:23:20.205 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:161,source_light_Type:B_SourceLightType
2025-08-03 10:23:20.373 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;161/261,
2025-08-03 10:23:20.382 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:23:20.419 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:23:20.678 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:23:20.680 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":161,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_161_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:20.758 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 162
2025-08-03 10:23:20.758 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 162
2025-08-03 10:23:20.758 [Thd =47]  Info Default  开始扫描条带； [162/261]
2025-08-03 10:23:20.767 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:23:20.770 [Thd =70]  Info Default CaptureBeginX: 70.08854, CaptureBeginY:-11.96078, CaptureEndX:-70.06035, CaptureEndY:-11.96078, VectorBeginX:71.65343, VectorBeginY:-11.96078, VectorEndX:-72.01683, VectorEndY:-11.96078, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:23:20.770 [Thd =70]  Info Default ***row:162, vectorBeginX:71.653, vectorBeginY:-11.961, captureBeginX:70.089, captureBeginY:-11.961, captureEndX:-70.060, captureEndY:-11.961, vectorEndX:-72.017, vectorEndY:-11.961
2025-08-03 10:23:20.770 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:20.772 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.088535445894,EndPoint:70.0603457479832
2025-08-03 10:23:21.155 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:23:21.157 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":161,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_161_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:21.871 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:23:21
2025-08-03 10:23:21.883 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:23:21
2025-08-03 10:23:23.356 [Thd =31]  Error Default CameraImageError！strip_idx:162, PreAdjustImg iret:1 
2025-08-03 10:23:25.619 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:162
2025-08-03 10:23:25.619 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:162,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:25.619 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:25.791 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;162/261,
2025-08-03 10:23:27.903 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:23:27
2025-08-03 10:23:27.929 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:23:27
2025-08-03 10:23:31.941 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:23:31
2025-08-03 10:23:31.962 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:23:31
2025-08-03 10:23:35.801 [Thd =70]  Error Default ====================== Star Rescan ======================
2025-08-03 10:23:35.802 [Thd =70]  Info Default Singleton.ReleaseStripData Clear the temporary strip queue!Count：1
2025-08-03 10:23:38.472 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:23:38
2025-08-03 10:23:38.496 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:23:38
2025-08-03 10:23:41.216 [Thd =70]  Error Default ========rescan=====Velocity:30=========
2025-08-03 10:23:41.366 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 162
2025-08-03 10:23:41.366 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 162
2025-08-03 10:23:41.366 [Thd =48]  Info Default  开始扫描条带； [162/261]
2025-08-03 10:23:41.375 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:23:41.378 [Thd =70]  Info Default CaptureBeginX: 70.08854, CaptureBeginY:-11.96078, CaptureEndX:-70.06035, CaptureEndY:-11.96078, VectorBeginX:71.65343, VectorBeginY:-11.96078, VectorEndX:-72.01683, VectorEndY:-11.96078, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:23:41.378 [Thd =70]  Info Default ***row:162, vectorBeginX:71.653, vectorBeginY:-11.961, captureBeginX:70.089, captureBeginY:-11.961, captureEndX:-70.060, captureEndY:-11.961, vectorEndX:-72.017, vectorEndY:-11.961
2025-08-03 10:23:41.378 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:41.380 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.088535445894,EndPoint:70.0603457479832
2025-08-03 10:23:46.225 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:162
2025-08-03 10:23:46.225 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:162,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:46.225 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:46.227 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:162
2025-08-03 10:23:46.227 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:162,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:46.227 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:162,source_light_Type:A_SourceLightType
2025-08-03 10:23:46.227 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:162,source_light_Type:B_SourceLightType
2025-08-03 10:23:46.227 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：162,A_SourceLightType
2025-08-03 10:23:46.227 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：162,B_SourceLightType
2025-08-03 10:23:46.401 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;162/261,
2025-08-03 10:23:46.410 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:23:46.453 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:23:46.680 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:23:46.683 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":162,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_162_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:46.788 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 163
2025-08-03 10:23:46.788 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 163
2025-08-03 10:23:46.788 [Thd =57]  Info Default  开始扫描条带； [163/261]
2025-08-03 10:23:46.797 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:23:46.800 [Thd =70]  Info Default ***row:163, vectorBeginX:-72.017, vectorBeginY:-12.389, captureBeginX:-70.398, captureBeginY:-12.389, captureEndX:69.751, captureEndY:-12.389, vectorEndX:71.653, vectorEndY:-12.389
2025-08-03 10:23:46.800 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:46.802 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3977497831472,EndPoint:-69.7511314107301
2025-08-03 10:23:47.149 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:23:47.152 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":162,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_162_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:51.654 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:163
2025-08-03 10:23:51.655 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:163,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:51.655 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:51.656 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:163
2025-08-03 10:23:51.657 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:163,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:51.657 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:163,source_light_Type:A_SourceLightType
2025-08-03 10:23:51.657 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:163,source_light_Type:B_SourceLightType
2025-08-03 10:23:51.657 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：163,A_SourceLightType
2025-08-03 10:23:51.657 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：163,B_SourceLightType
2025-08-03 10:23:51.825 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;163/261,
2025-08-03 10:23:51.834 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:23:51.914 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:23:52.118 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:23:52.122 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":163,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_163_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:52.249 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 164
2025-08-03 10:23:52.249 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 164
2025-08-03 10:23:52.249 [Thd =48]  Info Default  开始扫描条带； [164/261]
2025-08-03 10:23:52.258 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:23:52.261 [Thd =70]  Info Default CaptureBeginX: 70.08857, CaptureBeginY:-12.81740, CaptureEndX:-70.06031, CaptureEndY:-12.81740, VectorBeginX:71.65346, VectorBeginY:-12.81740, VectorEndX:-72.01680, VectorEndY:-12.81740, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:23:52.261 [Thd =70]  Info Default ***row:164, vectorBeginX:71.653, vectorBeginY:-12.817, captureBeginX:70.089, captureBeginY:-12.817, captureEndX:-70.060, captureEndY:-12.817, vectorEndX:-72.017, vectorEndY:-12.817
2025-08-03 10:23:52.261 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:52.263 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0885725372333,EndPoint:70.060308656644
2025-08-03 10:23:52.588 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:23:52.591 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":163,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_163_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:57.107 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:164
2025-08-03 10:23:57.107 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:164,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:57.107 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:23:57.109 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:164
2025-08-03 10:23:57.109 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:164,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:23:57.109 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:164,source_light_Type:A_SourceLightType
2025-08-03 10:23:57.109 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:164,source_light_Type:B_SourceLightType
2025-08-03 10:23:57.110 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：164,A_SourceLightType
2025-08-03 10:23:57.110 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：164,B_SourceLightType
2025-08-03 10:23:57.279 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;164/261,
2025-08-03 10:23:57.289 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:23:57.341 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:23:57.569 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:23:57.572 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":164,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_164_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:23:57.675 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 165
2025-08-03 10:23:57.675 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 165
2025-08-03 10:23:57.675 [Thd =5]  Info Default  开始扫描条带； [165/261]
2025-08-03 10:23:57.684 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:23:57.686 [Thd =70]  Info Default ***row:165, vectorBeginX:-72.017, vectorBeginY:-13.246, captureBeginX:-70.398, captureBeginY:-13.246, captureEndX:69.751, captureEndY:-13.246, vectorEndX:71.653, vectorEndY:-13.246
2025-08-03 10:23:57.686 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:23:57.688 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3977126918079,EndPoint:-69.7511685020694
2025-08-03 10:23:58.049 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:23:58.052 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":164,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_164_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:02.534 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:165
2025-08-03 10:24:02.534 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:165,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:02.534 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:02.536 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:165
2025-08-03 10:24:02.537 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:165,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:02.537 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:165,source_light_Type:A_SourceLightType
2025-08-03 10:24:02.537 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:165,source_light_Type:B_SourceLightType
2025-08-03 10:24:02.537 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：165,A_SourceLightType
2025-08-03 10:24:02.537 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：165,B_SourceLightType
2025-08-03 10:24:02.710 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;165/261,
2025-08-03 10:24:02.719 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:02.764 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:02.996 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:02.998 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":165,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_165_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:03.107 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 166
2025-08-03 10:24:03.107 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 166
2025-08-03 10:24:03.107 [Thd =57]  Info Default  开始扫描条带； [166/261]
2025-08-03 10:24:03.118 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:24:03.121 [Thd =70]  Info Default CaptureBeginX: 70.08861, CaptureBeginY:-13.67403, CaptureEndX:-70.06027, CaptureEndY:-13.67403, VectorBeginX:71.65350, VectorBeginY:-13.67403, VectorEndX:-72.01676, VectorEndY:-13.67403, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:24:03.121 [Thd =70]  Info Default ***row:166, vectorBeginX:71.653, vectorBeginY:-13.674, captureBeginX:70.089, captureBeginY:-13.674, captureEndX:-70.060, captureEndY:-13.674, vectorEndX:-72.017, vectorEndY:-13.674
2025-08-03 10:24:03.121 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:03.123 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0886096285726,EndPoint:70.0602715653047
2025-08-03 10:24:03.468 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:03.470 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":165,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_165_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:05.104 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:05
2025-08-03 10:24:05.125 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:05
2025-08-03 10:24:07.967 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:166
2025-08-03 10:24:07.968 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:166,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:07.968 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:07.970 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:166
2025-08-03 10:24:07.970 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:166,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:07.970 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:166,source_light_Type:A_SourceLightType
2025-08-03 10:24:07.970 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:166,source_light_Type:B_SourceLightType
2025-08-03 10:24:07.971 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：166,A_SourceLightType
2025-08-03 10:24:07.971 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：166,B_SourceLightType
2025-08-03 10:24:08.151 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;166/261,
2025-08-03 10:24:08.160 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:08.209 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:08.447 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:08.449 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":166,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_166_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:08.554 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 167
2025-08-03 10:24:08.554 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 167
2025-08-03 10:24:08.554 [Thd =47]  Info Default  开始扫描条带； [167/261]
2025-08-03 10:24:08.571 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:24:08.573 [Thd =70]  Info Default ***row:167, vectorBeginX:-72.017, vectorBeginY:-14.102, captureBeginX:-70.398, captureBeginY:-14.102, captureEndX:69.751, captureEndY:-14.102, vectorEndX:71.654, vectorEndY:-14.102
2025-08-03 10:24:08.573 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:08.576 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3976756004686,EndPoint:-69.7512055934087
2025-08-03 10:24:08.920 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:08.922 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":166,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_166_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:09.641 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:09
2025-08-03 10:24:09.660 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:09
2025-08-03 10:24:13.426 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:167
2025-08-03 10:24:13.427 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:167,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:13.427 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:13.429 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:167
2025-08-03 10:24:13.429 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:167,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:13.429 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:167,source_light_Type:A_SourceLightType
2025-08-03 10:24:13.429 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:167,source_light_Type:B_SourceLightType
2025-08-03 10:24:13.429 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：167,A_SourceLightType
2025-08-03 10:24:13.429 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：167,B_SourceLightType
2025-08-03 10:24:13.601 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;167/261,
2025-08-03 10:24:13.611 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:13.734 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:13.889 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:13.892 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":167,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_167_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:14.079 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 168
2025-08-03 10:24:14.079 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 168
2025-08-03 10:24:14.079 [Thd =59]  Info Default  开始扫描条带； [168/261]
2025-08-03 10:24:14.088 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:24:14.091 [Thd =70]  Info Default CaptureBeginX: 70.08865, CaptureBeginY:-14.53065, CaptureEndX:-70.06023, CaptureEndY:-14.53065, VectorBeginX:71.65354, VectorBeginY:-14.53065, VectorEndX:-72.01672, VectorEndY:-14.53065, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:24:14.091 [Thd =70]  Info Default ***row:168, vectorBeginX:71.654, vectorBeginY:-14.531, captureBeginX:70.089, captureBeginY:-14.531, captureEndX:-70.060, captureEndY:-14.531, vectorEndX:-72.017, vectorEndY:-14.531
2025-08-03 10:24:14.091 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:14.093 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0886467199119,EndPoint:70.0602344739654
2025-08-03 10:24:14.362 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:14.365 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":167,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_167_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:15.178 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:15
2025-08-03 10:24:15.199 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:15
2025-08-03 10:24:18.937 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:168
2025-08-03 10:24:18.937 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:168,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:18.937 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:18.939 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:168
2025-08-03 10:24:18.939 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:168,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:18.940 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:168,source_light_Type:A_SourceLightType
2025-08-03 10:24:18.940 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：168,A_SourceLightType
2025-08-03 10:24:18.940 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：168,B_SourceLightType
2025-08-03 10:24:18.940 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:168,source_light_Type:B_SourceLightType
2025-08-03 10:24:19.114 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;168/261,
2025-08-03 10:24:19.123 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:19.185 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:19.396 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:19.398 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":168,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_168_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:19.531 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 169
2025-08-03 10:24:19.531 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 169
2025-08-03 10:24:19.531 [Thd =69]  Info Default  开始扫描条带； [169/261]
2025-08-03 10:24:19.540 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:24:19.542 [Thd =70]  Info Default ***row:169, vectorBeginX:-72.017, vectorBeginY:-14.959, captureBeginX:-70.398, captureBeginY:-14.959, captureEndX:69.751, captureEndY:-14.959, vectorEndX:71.654, vectorEndY:-14.959
2025-08-03 10:24:19.542 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:19.544 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3976385091293,EndPoint:-69.751242684748
2025-08-03 10:24:19.871 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:19.876 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":168,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_168_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:21.220 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:21
2025-08-03 10:24:21.235 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:21
2025-08-03 10:24:24.392 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:169
2025-08-03 10:24:24.392 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:169,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:24.392 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:24.394 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:169
2025-08-03 10:24:24.395 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:169,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:24.395 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:169,source_light_Type:A_SourceLightType
2025-08-03 10:24:24.395 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:169,source_light_Type:B_SourceLightType
2025-08-03 10:24:24.395 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：169,A_SourceLightType
2025-08-03 10:24:24.395 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：169,B_SourceLightType
2025-08-03 10:24:24.569 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;169/261,
2025-08-03 10:24:24.578 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:24.625 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:24.872 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:24.875 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":169,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_169_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:24.960 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 170
2025-08-03 10:24:24.960 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 170
2025-08-03 10:24:24.960 [Thd =58]  Info Default  开始扫描条带； [170/261]
2025-08-03 10:24:24.969 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:24:24.971 [Thd =70]  Info Default CaptureBeginX: 70.08868, CaptureBeginY:-15.38728, CaptureEndX:-70.06020, CaptureEndY:-15.38728, VectorBeginX:71.65357, VectorBeginY:-15.38728, VectorEndX:-72.01669, VectorEndY:-15.38728, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:24:24.972 [Thd =70]  Info Default ***row:170, vectorBeginX:71.654, vectorBeginY:-15.387, captureBeginX:70.089, captureBeginY:-15.387, captureEndX:-70.060, captureEndY:-15.387, vectorEndX:-72.017, vectorEndY:-15.387
2025-08-03 10:24:24.972 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:24.973 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0886838112512,EndPoint:70.0601973826261
2025-08-03 10:24:25.348 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:25.351 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":169,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_169_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:25.750 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:25
2025-08-03 10:24:25.766 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:25
2025-08-03 10:24:29.818 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:170
2025-08-03 10:24:29.818 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:170,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:29.818 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:29.820 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:170
2025-08-03 10:24:29.820 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:170,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:29.821 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:170,source_light_Type:A_SourceLightType
2025-08-03 10:24:29.821 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:170,source_light_Type:B_SourceLightType
2025-08-03 10:24:29.821 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：170,A_SourceLightType
2025-08-03 10:24:29.821 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：170,B_SourceLightType
2025-08-03 10:24:29.994 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;170/261,
2025-08-03 10:24:30.003 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:30.059 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:30.284 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:30.286 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":170,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_170_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:30.394 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 171
2025-08-03 10:24:30.394 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 171
2025-08-03 10:24:30.394 [Thd =55]  Info Default  开始扫描条带； [171/261]
2025-08-03 10:24:30.403 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:24:30.406 [Thd =70]  Info Default ***row:171, vectorBeginX:-72.017, vectorBeginY:-15.816, captureBeginX:-70.398, captureBeginY:-15.816, captureEndX:69.751, captureEndY:-15.816, vectorEndX:71.654, vectorEndY:-15.816
2025-08-03 10:24:30.406 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:30.407 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.39760141779,EndPoint:-69.7512797760872
2025-08-03 10:24:30.757 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:30.759 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":170,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_170_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:32.288 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:32
2025-08-03 10:24:32.308 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:32
2025-08-03 10:24:35.254 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:171
2025-08-03 10:24:35.254 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:171,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:35.254 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:35.256 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:171
2025-08-03 10:24:35.256 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:171,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:35.256 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:171,source_light_Type:A_SourceLightType
2025-08-03 10:24:35.256 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:171,source_light_Type:B_SourceLightType
2025-08-03 10:24:35.256 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：171,A_SourceLightType
2025-08-03 10:24:35.257 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：171,B_SourceLightType
2025-08-03 10:24:35.429 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;171/261,
2025-08-03 10:24:35.439 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:35.484 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:35.712 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:35.714 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":171,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_171_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:35.831 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 172
2025-08-03 10:24:35.831 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 172
2025-08-03 10:24:35.831 [Thd =69]  Info Default  开始扫描条带； [172/261]
2025-08-03 10:24:35.840 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:24:35.843 [Thd =70]  Info Default CaptureBeginX: 70.08872, CaptureBeginY:-16.24391, CaptureEndX:-70.06016, CaptureEndY:-16.24391, VectorBeginX:71.65361, VectorBeginY:-16.24391, VectorEndX:-72.01665, VectorEndY:-16.24391, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:24:35.843 [Thd =70]  Info Default ***row:172, vectorBeginX:71.654, vectorBeginY:-16.244, captureBeginX:70.089, captureBeginY:-16.244, captureEndX:-70.060, captureEndY:-16.244, vectorEndX:-72.017, vectorEndY:-16.244
2025-08-03 10:24:35.843 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:35.844 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0887209025905,EndPoint:70.0601602912868
2025-08-03 10:24:36.203 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:36.205 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":171,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_171_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:36.322 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:36
2025-08-03 10:24:36.334 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:36
2025-08-03 10:24:40.691 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:172
2025-08-03 10:24:40.691 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:172,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:40.691 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:40.813 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:172
2025-08-03 10:24:40.814 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:172,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:40.814 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:172,source_light_Type:B_SourceLightType
2025-08-03 10:24:40.814 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:172,source_light_Type:A_SourceLightType
2025-08-03 10:24:40.814 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：172,B_SourceLightType
2025-08-03 10:24:40.814 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：172,A_SourceLightType
2025-08-03 10:24:40.867 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;172/261,
2025-08-03 10:24:40.876 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:40.932 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:41.270 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 173
2025-08-03 10:24:41.270 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 173
2025-08-03 10:24:41.270 [Thd =47]  Info Default  开始扫描条带； [173/261]
2025-08-03 10:24:41.279 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:24:41.282 [Thd =70]  Info Default ***row:173, vectorBeginX:-72.017, vectorBeginY:-16.672, captureBeginX:-70.398, captureBeginY:-16.672, captureEndX:69.751, captureEndY:-16.672, vectorEndX:71.654, vectorEndY:-16.672
2025-08-03 10:24:41.282 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:41.284 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3975643264507,EndPoint:-69.7513168674265
2025-08-03 10:24:41.287 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:41.289 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":172,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_172_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:41.771 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:41.773 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":172,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_172_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:42.856 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:42
2025-08-03 10:24:42.867 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:42
2025-08-03 10:24:46.131 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:173
2025-08-03 10:24:46.132 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:173,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:46.132 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:46.134 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:173
2025-08-03 10:24:46.135 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:173,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:46.135 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:173,source_light_Type:A_SourceLightType
2025-08-03 10:24:46.135 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:173,source_light_Type:B_SourceLightType
2025-08-03 10:24:46.135 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：173,A_SourceLightType
2025-08-03 10:24:46.135 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：173,B_SourceLightType
2025-08-03 10:24:46.302 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;173/261,
2025-08-03 10:24:46.312 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:46.356 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:46.591 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:46.593 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":173,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_173_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:46.691 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 174
2025-08-03 10:24:46.691 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 174
2025-08-03 10:24:46.691 [Thd =35]  Info Default  开始扫描条带； [174/261]
2025-08-03 10:24:46.700 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:24:46.703 [Thd =70]  Info Default CaptureBeginX: 70.08876, CaptureBeginY:-17.10053, CaptureEndX:-70.06012, CaptureEndY:-17.10053, VectorBeginX:71.65365, VectorBeginY:-17.10053, VectorEndX:-72.01661, VectorEndY:-17.10053, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:24:46.703 [Thd =70]  Info Default ***row:174, vectorBeginX:71.654, vectorBeginY:-17.101, captureBeginX:70.089, captureBeginY:-17.101, captureEndX:-70.060, captureEndY:-17.101, vectorEndX:-72.017, vectorEndY:-17.101
2025-08-03 10:24:46.703 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:46.705 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0887579939297,EndPoint:70.0601231999475
2025-08-03 10:24:47.070 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:47.072 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":173,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_173_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:47.382 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:47
2025-08-03 10:24:47.395 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:47
2025-08-03 10:24:51.552 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:174
2025-08-03 10:24:51.552 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:174,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:51.552 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:51.553 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:174
2025-08-03 10:24:51.554 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:174,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:51.554 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:174,source_light_Type:A_SourceLightType
2025-08-03 10:24:51.554 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：174,A_SourceLightType
2025-08-03 10:24:51.554 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：174,B_SourceLightType
2025-08-03 10:24:51.554 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:174,source_light_Type:B_SourceLightType
2025-08-03 10:24:51.724 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;174/261,
2025-08-03 10:24:51.733 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:51.794 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:52.016 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:52.018 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":174,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_174_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:52.134 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 175
2025-08-03 10:24:52.134 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 175
2025-08-03 10:24:52.134 [Thd =44]  Info Default  开始扫描条带； [175/261]
2025-08-03 10:24:52.145 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:24:52.148 [Thd =70]  Info Default ***row:175, vectorBeginX:-72.017, vectorBeginY:-17.529, captureBeginX:-70.398, captureBeginY:-17.529, captureEndX:69.751, captureEndY:-17.529, vectorEndX:71.654, vectorEndY:-17.529
2025-08-03 10:24:52.148 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:52.149 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3975272351114,EndPoint:-69.7513539587658
2025-08-03 10:24:52.498 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:52.501 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":174,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_174_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:53.416 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:53
2025-08-03 10:24:53.427 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:53
2025-08-03 10:24:56.998 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:175
2025-08-03 10:24:56.998 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:175,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:56.998 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:24:56.999 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:175
2025-08-03 10:24:57.000 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:175,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:24:57.002 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:175,source_light_Type:A_SourceLightType
2025-08-03 10:24:57.002 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:175,source_light_Type:B_SourceLightType
2025-08-03 10:24:57.002 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：175,A_SourceLightType
2025-08-03 10:24:57.003 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：175,B_SourceLightType
2025-08-03 10:24:57.169 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;175/261,
2025-08-03 10:24:57.178 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:24:57.226 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:24:57.458 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:24:57.461 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":175,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_175_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:24:57.491 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:24:57
2025-08-03 10:24:57.507 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:24:57
2025-08-03 10:24:57.560 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 176
2025-08-03 10:24:57.560 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 176
2025-08-03 10:24:57.560 [Thd =69]  Info Default  开始扫描条带； [176/261]
2025-08-03 10:24:57.569 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:24:57.572 [Thd =70]  Info Default CaptureBeginX: 70.08880, CaptureBeginY:-17.95716, CaptureEndX:-70.06009, CaptureEndY:-17.95716, VectorBeginX:71.65369, VectorBeginY:-17.95716, VectorEndX:-72.01658, VectorEndY:-17.95716, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:24:57.572 [Thd =70]  Info Default ***row:176, vectorBeginX:71.654, vectorBeginY:-17.957, captureBeginX:70.089, captureBeginY:-17.957, captureEndX:-70.060, captureEndY:-17.957, vectorEndX:-72.017, vectorEndY:-17.957
2025-08-03 10:24:57.572 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:24:57.575 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.088795085269,EndPoint:70.0600861086082
2025-08-03 10:24:57.931 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:24:57.933 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":175,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_175_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:02.426 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:176
2025-08-03 10:25:02.427 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:176,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:02.427 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:02.428 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:176
2025-08-03 10:25:02.428 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:176,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:02.428 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:176,source_light_Type:A_SourceLightType
2025-08-03 10:25:02.428 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:176,source_light_Type:B_SourceLightType
2025-08-03 10:25:02.429 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：176,A_SourceLightType
2025-08-03 10:25:02.429 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：176,B_SourceLightType
2025-08-03 10:25:02.606 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;176/261,
2025-08-03 10:25:02.615 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:02.659 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:02.889 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:02.891 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":176,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_176_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:02.994 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 177
2025-08-03 10:25:02.994 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 177
2025-08-03 10:25:02.994 [Thd =58]  Info Default  开始扫描条带； [177/261]
2025-08-03 10:25:03.003 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:25:03.006 [Thd =70]  Info Default ***row:177, vectorBeginX:-72.017, vectorBeginY:-18.385, captureBeginX:-70.397, captureBeginY:-18.385, captureEndX:69.751, captureEndY:-18.385, vectorEndX:71.654, vectorEndY:-18.385
2025-08-03 10:25:03.006 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:03.007 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3974901437721,EndPoint:-69.7513910501051
2025-08-03 10:25:03.367 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:03.370 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":176,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_176_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:04.534 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:04
2025-08-03 10:25:04.553 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:04
2025-08-03 10:25:07.854 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:177
2025-08-03 10:25:07.854 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:177,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:07.855 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:07.857 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:177
2025-08-03 10:25:07.857 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:177,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:07.857 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:177,source_light_Type:A_SourceLightType
2025-08-03 10:25:07.857 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:177,source_light_Type:B_SourceLightType
2025-08-03 10:25:07.857 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：177,A_SourceLightType
2025-08-03 10:25:07.857 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：177,B_SourceLightType
2025-08-03 10:25:08.025 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;177/261,
2025-08-03 10:25:08.035 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:08.094 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:08.315 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:08.318 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":177,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_177_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:08.440 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 178
2025-08-03 10:25:08.440 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 178
2025-08-03 10:25:08.440 [Thd =51]  Info Default  开始扫描条带； [178/261]
2025-08-03 10:25:08.449 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:25:08.452 [Thd =70]  Info Default CaptureBeginX: 70.08883, CaptureBeginY:-18.81378, CaptureEndX:-70.06005, CaptureEndY:-18.81378, VectorBeginX:71.65372, VectorBeginY:-18.81378, VectorEndX:-72.01654, VectorEndY:-18.81378, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:25:08.452 [Thd =70]  Info Default ***row:178, vectorBeginX:71.654, vectorBeginY:-18.814, captureBeginX:70.089, captureBeginY:-18.814, captureEndX:-70.060, captureEndY:-18.814, vectorEndX:-72.017, vectorEndY:-18.814
2025-08-03 10:25:08.452 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:08.454 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0888321766083,EndPoint:70.0600490172689
2025-08-03 10:25:08.787 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:08.790 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":177,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_177_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:09.570 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:09
2025-08-03 10:25:09.582 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:09
2025-08-03 10:25:13.299 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:178
2025-08-03 10:25:13.299 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:178,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:13.299 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:13.301 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:178
2025-08-03 10:25:13.301 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:178,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:13.301 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:178,source_light_Type:A_SourceLightType
2025-08-03 10:25:13.301 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:178,source_light_Type:B_SourceLightType
2025-08-03 10:25:13.302 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：178,A_SourceLightType
2025-08-03 10:25:13.302 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：178,B_SourceLightType
2025-08-03 10:25:13.474 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;178/261,
2025-08-03 10:25:13.484 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:13.533 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:13.758 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:13.760 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":178,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_178_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:13.880 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 179
2025-08-03 10:25:13.880 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 179
2025-08-03 10:25:13.880 [Thd =47]  Info Default  开始扫描条带； [179/261]
2025-08-03 10:25:13.889 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:25:13.891 [Thd =70]  Info Default ***row:179, vectorBeginX:-72.017, vectorBeginY:-19.242, captureBeginX:-70.397, captureBeginY:-19.242, captureEndX:69.751, captureEndY:-19.242, vectorEndX:71.654, vectorEndY:-19.242
2025-08-03 10:25:13.892 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:13.893 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3974530524328,EndPoint:-69.7514281414444
2025-08-03 10:25:14.227 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:14.229 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":178,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_178_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:15.602 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:15
2025-08-03 10:25:15.615 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:15
2025-08-03 10:25:18.740 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:179
2025-08-03 10:25:18.740 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:179,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:18.740 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:18.742 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:179
2025-08-03 10:25:18.742 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:179,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:18.742 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:179,source_light_Type:A_SourceLightType
2025-08-03 10:25:18.742 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:179,source_light_Type:B_SourceLightType
2025-08-03 10:25:18.742 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：179,A_SourceLightType
2025-08-03 10:25:18.742 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：179,B_SourceLightType
2025-08-03 10:25:18.912 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;179/261,
2025-08-03 10:25:18.922 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:18.980 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:19.201 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:19.204 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":179,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_179_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:19.316 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 180
2025-08-03 10:25:19.316 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 180
2025-08-03 10:25:19.316 [Thd =58]  Info Default  开始扫描条带； [180/261]
2025-08-03 10:25:19.325 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:25:19.327 [Thd =70]  Info Default CaptureBeginX: 70.08887, CaptureBeginY:-19.67041, CaptureEndX:-70.06001, CaptureEndY:-19.67041, VectorBeginX:71.65376, VectorBeginY:-19.67041, VectorEndX:-72.01650, VectorEndY:-19.67041, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:25:19.328 [Thd =70]  Info Default ***row:180, vectorBeginX:71.654, vectorBeginY:-19.670, captureBeginX:70.089, captureBeginY:-19.670, captureEndX:-70.060, captureEndY:-19.670, vectorEndX:-72.017, vectorEndY:-19.670
2025-08-03 10:25:19.328 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:19.330 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0888692679476,EndPoint:70.0600119259296
2025-08-03 10:25:19.676 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:19.678 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":179,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_179_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:20.130 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:20
2025-08-03 10:25:20.144 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:20
2025-08-03 10:25:24.174 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:180
2025-08-03 10:25:24.174 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:180,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:24.175 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:24.177 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:180
2025-08-03 10:25:24.177 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:180,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:24.177 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:180,source_light_Type:A_SourceLightType
2025-08-03 10:25:24.177 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：180,A_SourceLightType
2025-08-03 10:25:24.177 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：180,B_SourceLightType
2025-08-03 10:25:24.177 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:180,source_light_Type:B_SourceLightType
2025-08-03 10:25:24.349 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;180/261,
2025-08-03 10:25:24.359 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:24.407 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:24.636 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:24.638 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":180,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_180_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:24.743 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 181
2025-08-03 10:25:24.743 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 181
2025-08-03 10:25:24.743 [Thd =35]  Info Default  开始扫描条带； [181/261]
2025-08-03 10:25:24.761 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:25:24.764 [Thd =70]  Info Default ***row:181, vectorBeginX:-72.016, vectorBeginY:-20.099, captureBeginX:-70.397, captureBeginY:-20.099, captureEndX:69.751, captureEndY:-20.099, vectorEndX:71.654, vectorEndY:-20.099
2025-08-03 10:25:24.764 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:24.766 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3974159610935,EndPoint:-69.7514652327837
2025-08-03 10:25:25.109 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:25.112 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":180,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_180_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:26.165 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:26
2025-08-03 10:25:26.178 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:26
2025-08-03 10:25:29.617 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:181
2025-08-03 10:25:29.617 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:181,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:29.617 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:29.620 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:181
2025-08-03 10:25:29.620 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:181,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:29.620 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:181,source_light_Type:A_SourceLightType
2025-08-03 10:25:29.620 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:181,source_light_Type:B_SourceLightType
2025-08-03 10:25:29.620 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：181,A_SourceLightType
2025-08-03 10:25:29.620 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：181,B_SourceLightType
2025-08-03 10:25:29.794 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;181/261,
2025-08-03 10:25:29.804 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:29.865 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:30.080 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:30.082 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":181,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_181_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:30.209 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 182
2025-08-03 10:25:30.209 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 182
2025-08-03 10:25:30.209 [Thd =50]  Info Default  开始扫描条带； [182/261]
2025-08-03 10:25:30.218 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:25:30.221 [Thd =70]  Info Default CaptureBeginX: 70.08891, CaptureBeginY:-20.52703, CaptureEndX:-70.05997, CaptureEndY:-20.52703, VectorBeginX:71.65380, VectorBeginY:-20.52703, VectorEndX:-72.01646, VectorEndY:-20.52703, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:25:30.221 [Thd =70]  Info Default ***row:182, vectorBeginX:71.654, vectorBeginY:-20.527, captureBeginX:70.089, captureBeginY:-20.527, captureEndX:-70.060, captureEndY:-20.527, vectorEndX:-72.016, vectorEndY:-20.527
2025-08-03 10:25:30.221 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:30.222 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0889063592869,EndPoint:70.0599748345903
2025-08-03 10:25:30.556 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:30.558 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":181,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_181_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:31.291 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:31
2025-08-03 10:25:31.302 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:31
2025-08-03 10:25:35.069 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:182
2025-08-03 10:25:35.069 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:182,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:35.069 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:35.070 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:182
2025-08-03 10:25:35.070 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:182,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:35.070 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:182,source_light_Type:A_SourceLightType
2025-08-03 10:25:35.070 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:182,source_light_Type:B_SourceLightType
2025-08-03 10:25:35.070 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：182,A_SourceLightType
2025-08-03 10:25:35.070 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：182,B_SourceLightType
2025-08-03 10:25:35.242 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;182/261,
2025-08-03 10:25:35.251 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:35.294 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:35.537 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:35.540 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":182,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_182_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:35.631 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 183
2025-08-03 10:25:35.631 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 183
2025-08-03 10:25:35.631 [Thd =61]  Info Default  开始扫描条带； [183/261]
2025-08-03 10:25:35.640 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:25:35.642 [Thd =70]  Info Default ***row:183, vectorBeginX:-72.016, vectorBeginY:-20.955, captureBeginX:-70.397, captureBeginY:-20.955, captureEndX:69.752, captureEndY:-20.955, vectorEndX:71.654, vectorEndY:-20.955
2025-08-03 10:25:35.642 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:35.644 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3973788697542,EndPoint:-69.751502324123
2025-08-03 10:25:36.011 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:36.013 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":182,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_182_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:37.322 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:37
2025-08-03 10:25:37.334 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:37
2025-08-03 10:25:40.492 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:183
2025-08-03 10:25:40.492 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:183,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:40.492 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:40.603 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:183
2025-08-03 10:25:40.603 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:183,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:40.603 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:183,source_light_Type:B_SourceLightType
2025-08-03 10:25:40.603 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:183,source_light_Type:A_SourceLightType
2025-08-03 10:25:40.603 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：183,B_SourceLightType
2025-08-03 10:25:40.604 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：183,A_SourceLightType
2025-08-03 10:25:40.669 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;183/261,
2025-08-03 10:25:40.678 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:40.794 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:41.060 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:41.063 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":183,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_183_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:41.130 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 184
2025-08-03 10:25:41.130 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 184
2025-08-03 10:25:41.130 [Thd =35]  Info Default  开始扫描条带； [184/261]
2025-08-03 10:25:41.141 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:25:41.144 [Thd =70]  Info Default CaptureBeginX: 70.08894, CaptureBeginY:-21.38366, CaptureEndX:-70.05994, CaptureEndY:-21.38366, VectorBeginX:71.65383, VectorBeginY:-21.38366, VectorEndX:-72.01643, VectorEndY:-21.38366, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:25:41.144 [Thd =70]  Info Default ***row:184, vectorBeginX:71.654, vectorBeginY:-21.384, captureBeginX:70.089, captureBeginY:-21.384, captureEndX:-70.060, captureEndY:-21.384, vectorEndX:-72.016, vectorEndY:-21.384
2025-08-03 10:25:41.144 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:41.145 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0889434506262,EndPoint:70.059937743251
2025-08-03 10:25:41.398 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:41
2025-08-03 10:25:41.410 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:41
2025-08-03 10:25:41.550 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:41.552 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":183,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_183_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:45.990 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:184
2025-08-03 10:25:45.990 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:184,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:45.990 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:45.992 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:184
2025-08-03 10:25:45.992 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:184,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:45.992 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:184,source_light_Type:A_SourceLightType
2025-08-03 10:25:45.992 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:184,source_light_Type:B_SourceLightType
2025-08-03 10:25:45.992 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：184,A_SourceLightType
2025-08-03 10:25:45.992 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：184,B_SourceLightType
2025-08-03 10:25:46.161 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;184/261,
2025-08-03 10:25:46.170 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:46.215 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:46.452 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:46.455 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":184,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_184_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:46.551 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 185
2025-08-03 10:25:46.551 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 185
2025-08-03 10:25:46.551 [Thd =58]  Info Default  开始扫描条带； [185/261]
2025-08-03 10:25:46.560 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:25:46.563 [Thd =70]  Info Default ***row:185, vectorBeginX:-72.016, vectorBeginY:-21.812, captureBeginX:-70.397, captureBeginY:-21.812, captureEndX:69.752, captureEndY:-21.812, vectorEndX:71.654, vectorEndY:-21.812
2025-08-03 10:25:46.563 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:46.565 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3973417784149,EndPoint:-69.7515394154623
2025-08-03 10:25:46.927 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:46.929 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":184,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_184_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:48.042 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:48
2025-08-03 10:25:48.059 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:48
2025-08-03 10:25:51.412 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:185
2025-08-03 10:25:51.412 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:185,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:51.412 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:51.414 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:185
2025-08-03 10:25:51.414 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:185,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:51.414 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:185,source_light_Type:A_SourceLightType
2025-08-03 10:25:51.414 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:185,source_light_Type:B_SourceLightType
2025-08-03 10:25:51.414 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：185,A_SourceLightType
2025-08-03 10:25:51.414 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：185,B_SourceLightType
2025-08-03 10:25:51.581 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;185/261,
2025-08-03 10:25:51.591 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:51.650 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:51.872 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:51.875 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":185,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_185_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:51.985 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 186
2025-08-03 10:25:51.985 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 186
2025-08-03 10:25:51.985 [Thd =50]  Info Default  开始扫描条带； [186/261]
2025-08-03 10:25:51.994 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:25:51.997 [Thd =70]  Info Default CaptureBeginX: 70.08898, CaptureBeginY:-22.24028, CaptureEndX:-70.05990, CaptureEndY:-22.24028, VectorBeginX:71.65387, VectorBeginY:-22.24028, VectorEndX:-72.01639, VectorEndY:-22.24028, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:25:51.997 [Thd =70]  Info Default ***row:186, vectorBeginX:71.654, vectorBeginY:-22.240, captureBeginX:70.089, captureBeginY:-22.240, captureEndX:-70.060, captureEndY:-22.240, vectorEndX:-72.016, vectorEndY:-22.240
2025-08-03 10:25:51.997 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:51.998 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0889805419655,EndPoint:70.0599006519117
2025-08-03 10:25:52.357 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:52.359 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":185,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_185_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:52.575 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:52
2025-08-03 10:25:52.587 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:52
2025-08-03 10:25:56.843 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:186
2025-08-03 10:25:56.843 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:186,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:56.843 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:25:56.845 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:186
2025-08-03 10:25:56.845 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:186,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:25:56.845 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:186,source_light_Type:A_SourceLightType
2025-08-03 10:25:56.846 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:186,source_light_Type:B_SourceLightType
2025-08-03 10:25:56.846 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：186,A_SourceLightType
2025-08-03 10:25:56.846 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：186,B_SourceLightType
2025-08-03 10:25:57.020 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;186/261,
2025-08-03 10:25:57.029 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:25:57.076 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:25:57.303 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:25:57.306 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":186,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_186_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:57.413 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 187
2025-08-03 10:25:57.413 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 187
2025-08-03 10:25:57.413 [Thd =68]  Info Default  开始扫描条带； [187/261]
2025-08-03 10:25:57.422 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:25:57.425 [Thd =70]  Info Default ***row:187, vectorBeginX:-72.016, vectorBeginY:-22.669, captureBeginX:-70.397, captureBeginY:-22.669, captureEndX:69.752, captureEndY:-22.669, vectorEndX:71.654, vectorEndY:-22.669
2025-08-03 10:25:57.425 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:25:57.426 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3973046870756,EndPoint:-69.7515765068016
2025-08-03 10:25:57.780 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:25:57.782 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":186,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_186_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:25:59.109 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:25:59
2025-08-03 10:25:59.121 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:25:59
2025-08-03 10:26:02.272 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:187
2025-08-03 10:26:02.273 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:187,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:02.273 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:02.276 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:187
2025-08-03 10:26:02.276 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:187,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:02.276 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:187,source_light_Type:A_SourceLightType
2025-08-03 10:26:02.276 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:187,source_light_Type:B_SourceLightType
2025-08-03 10:26:02.276 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：187,A_SourceLightType
2025-08-03 10:26:02.276 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：187,B_SourceLightType
2025-08-03 10:26:02.454 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;187/261,
2025-08-03 10:26:02.463 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:02.510 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:02.740 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:02.742 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":187,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_187_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:02.856 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 188
2025-08-03 10:26:02.856 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 188
2025-08-03 10:26:02.856 [Thd =44]  Info Default  开始扫描条带； [188/261]
2025-08-03 10:26:02.872 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:26:02.875 [Thd =70]  Info Default CaptureBeginX: 70.08902, CaptureBeginY:-23.09691, CaptureEndX:-70.05986, CaptureEndY:-23.09691, VectorBeginX:71.65391, VectorBeginY:-23.09691, VectorEndX:-72.01635, VectorEndY:-23.09691, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:26:02.875 [Thd =70]  Info Default ***row:188, vectorBeginX:71.654, vectorBeginY:-23.097, captureBeginX:70.089, captureBeginY:-23.097, captureEndX:-70.060, captureEndY:-23.097, vectorEndX:-72.016, vectorEndY:-23.097
2025-08-03 10:26:02.875 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:02.876 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0890176333048,EndPoint:70.0598635605724
2025-08-03 10:26:03.212 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:03.215 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":187,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_187_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:03.636 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:03
2025-08-03 10:26:03.648 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:03
2025-08-03 10:26:07.723 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:188
2025-08-03 10:26:07.724 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:188,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:07.724 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:07.742 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:188
2025-08-03 10:26:07.742 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:188,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:07.742 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:188,source_light_Type:B_SourceLightType
2025-08-03 10:26:07.742 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:188,source_light_Type:A_SourceLightType
2025-08-03 10:26:07.742 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：188,B_SourceLightType
2025-08-03 10:26:07.743 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：188,A_SourceLightType
2025-08-03 10:26:07.903 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;188/261,
2025-08-03 10:26:07.912 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:07.946 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:08.211 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:08.213 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":188,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_188_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:08.289 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 189
2025-08-03 10:26:08.289 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 189
2025-08-03 10:26:08.289 [Thd =35]  Info Default  开始扫描条带； [189/261]
2025-08-03 10:26:08.298 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:26:08.300 [Thd =70]  Info Default ***row:189, vectorBeginX:-72.016, vectorBeginY:-23.525, captureBeginX:-70.397, captureBeginY:-23.525, captureEndX:69.752, captureEndY:-23.525, vectorEndX:71.654, vectorEndY:-23.525
2025-08-03 10:26:08.300 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:08.302 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3972675957363,EndPoint:-69.7516135981409
2025-08-03 10:26:08.688 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:08.691 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":188,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_188_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:10.170 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:10
2025-08-03 10:26:10.182 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:10
2025-08-03 10:26:13.149 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:189
2025-08-03 10:26:13.149 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:13.149 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:13.151 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:189
2025-08-03 10:26:13.152 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:189,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:13.152 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:A_SourceLightType
2025-08-03 10:26:13.152 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:189,source_light_Type:B_SourceLightType
2025-08-03 10:26:13.152 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,A_SourceLightType
2025-08-03 10:26:13.152 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：189,B_SourceLightType
2025-08-03 10:26:13.326 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;189/261,
2025-08-03 10:26:13.336 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:13.395 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:13.610 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:13.612 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_189_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:13.729 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 190
2025-08-03 10:26:13.729 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 190
2025-08-03 10:26:13.729 [Thd =41]  Info Default  开始扫描条带； [190/261]
2025-08-03 10:26:13.738 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:26:13.741 [Thd =70]  Info Default CaptureBeginX: 70.08905, CaptureBeginY:-23.95353, CaptureEndX:-70.05983, CaptureEndY:-23.95353, VectorBeginX:71.65394, VectorBeginY:-23.95353, VectorEndX:-72.01632, VectorEndY:-23.95353, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:26:13.744 [Thd =70]  Info Default ***row:190, vectorBeginX:71.654, vectorBeginY:-23.954, captureBeginX:70.089, captureBeginY:-23.954, captureEndX:-70.060, captureEndY:-23.954, vectorEndX:-72.016, vectorEndY:-23.954
2025-08-03 10:26:13.744 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:13.745 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0890547246441,EndPoint:70.0598264692331
2025-08-03 10:26:14.090 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:14.092 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":189,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_189_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:15.198 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:15
2025-08-03 10:26:15.219 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:15
2025-08-03 10:26:18.593 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:190
2025-08-03 10:26:18.593 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:18.593 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:18.595 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:190
2025-08-03 10:26:18.596 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:190,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:18.596 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:A_SourceLightType
2025-08-03 10:26:18.596 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:190,source_light_Type:B_SourceLightType
2025-08-03 10:26:18.596 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,A_SourceLightType
2025-08-03 10:26:18.596 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：190,B_SourceLightType
2025-08-03 10:26:18.776 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;190/261,
2025-08-03 10:26:18.786 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:18.838 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:19.056 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:19.058 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_190_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:19.182 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 191
2025-08-03 10:26:19.182 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 191
2025-08-03 10:26:19.182 [Thd =50]  Info Default  开始扫描条带； [191/261]
2025-08-03 10:26:19.190 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:26:19.193 [Thd =70]  Info Default ***row:191, vectorBeginX:-72.016, vectorBeginY:-24.382, captureBeginX:-70.397, captureBeginY:-24.382, captureEndX:69.752, captureEndY:-24.382, vectorEndX:71.654, vectorEndY:-24.382
2025-08-03 10:26:19.193 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:19.194 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.397230504397,EndPoint:-69.7516506894802
2025-08-03 10:26:19.526 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:19.529 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":190,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_190_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:20.738 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:20
2025-08-03 10:26:20.751 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:20
2025-08-03 10:26:24.042 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:191
2025-08-03 10:26:24.042 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:24.042 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:24.045 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:191
2025-08-03 10:26:24.045 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:191,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:24.045 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:A_SourceLightType
2025-08-03 10:26:24.045 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:191,source_light_Type:B_SourceLightType
2025-08-03 10:26:24.045 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,A_SourceLightType
2025-08-03 10:26:24.045 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：191,B_SourceLightType
2025-08-03 10:26:24.216 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;191/261,
2025-08-03 10:26:24.225 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:24.267 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:24.504 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:24.506 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_191_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:24.601 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 192
2025-08-03 10:26:24.601 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 192
2025-08-03 10:26:24.601 [Thd =51]  Info Default  开始扫描条带； [192/261]
2025-08-03 10:26:24.610 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:26:24.613 [Thd =70]  Info Default CaptureBeginX: 70.08909, CaptureBeginY:-24.81016, CaptureEndX:-70.05979, CaptureEndY:-24.81016, VectorBeginX:71.65398, VectorBeginY:-24.81016, VectorEndX:-72.01628, VectorEndY:-24.81016, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:26:24.613 [Thd =70]  Info Default ***row:192, vectorBeginX:71.654, vectorBeginY:-24.810, captureBeginX:70.089, captureBeginY:-24.810, captureEndX:-70.060, captureEndY:-24.810, vectorEndX:-72.016, vectorEndY:-24.810
2025-08-03 10:26:24.613 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:24.615 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0890918159834,EndPoint:70.0597893778938
2025-08-03 10:26:24.978 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:24.981 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":191,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_191_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:25.266 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:25
2025-08-03 10:26:25.278 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:25
2025-08-03 10:26:29.466 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:192
2025-08-03 10:26:29.466 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:29.466 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:29.466 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:192
2025-08-03 10:26:29.466 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:192,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:29.466 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:A_SourceLightType
2025-08-03 10:26:29.466 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:192,source_light_Type:B_SourceLightType
2025-08-03 10:26:29.466 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,A_SourceLightType
2025-08-03 10:26:29.467 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：192,B_SourceLightType
2025-08-03 10:26:29.638 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;192/261,
2025-08-03 10:26:29.648 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:29.698 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:29.928 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:29.930 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_192_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:30.042 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 193
2025-08-03 10:26:30.042 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 193
2025-08-03 10:26:30.042 [Thd =58]  Info Default  开始扫描条带； [193/261]
2025-08-03 10:26:30.051 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:26:30.054 [Thd =70]  Info Default ***row:193, vectorBeginX:-72.016, vectorBeginY:-25.238, captureBeginX:-70.397, captureBeginY:-25.238, captureEndX:69.752, captureEndY:-25.238, vectorEndX:71.654, vectorEndY:-25.238
2025-08-03 10:26:30.054 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:30.056 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3971934130577,EndPoint:-69.7516877808195
2025-08-03 10:26:30.398 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:30.400 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":192,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_192_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:31.299 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:31
2025-08-03 10:26:31.311 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:31
2025-08-03 10:26:34.903 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:193
2025-08-03 10:26:34.903 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:34.903 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:34.905 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:193
2025-08-03 10:26:34.905 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:193,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:34.905 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:A_SourceLightType
2025-08-03 10:26:34.905 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:193,source_light_Type:B_SourceLightType
2025-08-03 10:26:34.905 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,A_SourceLightType
2025-08-03 10:26:34.905 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：193,B_SourceLightType
2025-08-03 10:26:35.082 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;193/261,
2025-08-03 10:26:35.091 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:35.149 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:35.363 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:35.365 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_193_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:35.492 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 194
2025-08-03 10:26:35.492 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 194
2025-08-03 10:26:35.492 [Thd =62]  Info Default  开始扫描条带； [194/261]
2025-08-03 10:26:35.501 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:26:35.504 [Thd =70]  Info Default CaptureBeginX: 70.08913, CaptureBeginY:-25.66679, CaptureEndX:-70.05975, CaptureEndY:-25.66679, VectorBeginX:71.65402, VectorBeginY:-25.66679, VectorEndX:-72.01624, VectorEndY:-25.66679, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:26:35.504 [Thd =70]  Info Default ***row:194, vectorBeginX:71.654, vectorBeginY:-25.667, captureBeginX:70.089, captureBeginY:-25.667, captureEndX:-70.060, captureEndY:-25.667, vectorEndX:-72.016, vectorEndY:-25.667
2025-08-03 10:26:35.504 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:35.506 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0891289073227,EndPoint:70.0597522865545
2025-08-03 10:26:35.835 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:35.838 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":193,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_193_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:36.329 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:36
2025-08-03 10:26:36.343 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:36
2025-08-03 10:26:40.356 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:194
2025-08-03 10:26:40.356 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:40.356 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:40.358 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:194
2025-08-03 10:26:40.359 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:194,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:40.359 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:A_SourceLightType
2025-08-03 10:26:40.359 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:194,source_light_Type:B_SourceLightType
2025-08-03 10:26:40.359 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,A_SourceLightType
2025-08-03 10:26:40.359 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：194,B_SourceLightType
2025-08-03 10:26:40.540 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;194/261,
2025-08-03 10:26:40.549 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:40.591 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:40.819 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:40.822 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_194_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:40.938 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 195
2025-08-03 10:26:40.938 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 195
2025-08-03 10:26:40.938 [Thd =41]  Info Default  开始扫描条带； [195/261]
2025-08-03 10:26:40.950 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:26:40.953 [Thd =70]  Info Default ***row:195, vectorBeginX:-72.016, vectorBeginY:-26.095, captureBeginX:-70.397, captureBeginY:-26.095, captureEndX:69.752, captureEndY:-26.095, vectorEndX:71.654, vectorEndY:-26.095
2025-08-03 10:26:40.953 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:40.955 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3971563217185,EndPoint:-69.7517248721588
2025-08-03 10:26:41.294 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:41.296 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":194,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_194_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:41.861 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:41
2025-08-03 10:26:41.873 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:41
2025-08-03 10:26:45.803 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:195
2025-08-03 10:26:45.803 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:45.803 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:45.805 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:195
2025-08-03 10:26:45.805 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:195,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:45.805 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:A_SourceLightType
2025-08-03 10:26:45.805 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:195,source_light_Type:B_SourceLightType
2025-08-03 10:26:45.805 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,A_SourceLightType
2025-08-03 10:26:45.805 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：195,B_SourceLightType
2025-08-03 10:26:45.977 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;195/261,
2025-08-03 10:26:45.986 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:46.047 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:46.268 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:46.271 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_195_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:46.382 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 196
2025-08-03 10:26:46.382 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 196
2025-08-03 10:26:46.382 [Thd =58]  Info Default  开始扫描条带； [196/261]
2025-08-03 10:26:46.388 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:46
2025-08-03 10:26:46.395 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:26:46.397 [Thd =70]  Info Default CaptureBeginX: 70.08917, CaptureBeginY:-26.52341, CaptureEndX:-70.05972, CaptureEndY:-26.52341, VectorBeginX:71.65406, VectorBeginY:-26.52341, VectorEndX:-72.01620, VectorEndY:-26.52341, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:26:46.398 [Thd =70]  Info Default ***row:196, vectorBeginX:71.654, vectorBeginY:-26.523, captureBeginX:70.089, captureBeginY:-26.523, captureEndX:-70.060, captureEndY:-26.523, vectorEndX:-72.016, vectorEndY:-26.523
2025-08-03 10:26:46.398 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:46.399 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.089165998662,EndPoint:70.0597151952152
2025-08-03 10:26:46.400 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:46
2025-08-03 10:26:46.758 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:46.760 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":195,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_195_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:51.249 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:196
2025-08-03 10:26:51.249 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:51.250 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:51.251 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:196
2025-08-03 10:26:51.251 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:196,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:51.251 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:A_SourceLightType
2025-08-03 10:26:51.251 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,A_SourceLightType
2025-08-03 10:26:51.252 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：196,B_SourceLightType
2025-08-03 10:26:51.252 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:196,source_light_Type:B_SourceLightType
2025-08-03 10:26:51.425 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;196/261,
2025-08-03 10:26:51.433 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:51.482 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:51.732 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:51.737 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_196_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:51.818 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 197
2025-08-03 10:26:51.818 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 197
2025-08-03 10:26:51.818 [Thd =59]  Info Default  开始扫描条带； [197/261]
2025-08-03 10:26:51.829 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:26:51.832 [Thd =70]  Info Default ***row:197, vectorBeginX:-72.016, vectorBeginY:-26.952, captureBeginX:-70.397, captureBeginY:-26.952, captureEndX:69.752, captureEndY:-26.952, vectorEndX:71.654, vectorEndY:-26.952
2025-08-03 10:26:51.832 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:51.834 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3971192303792,EndPoint:-69.7517619634981
2025-08-03 10:26:52.212 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:52.214 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":196,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_196_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:53.527 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:53
2025-08-03 10:26:53.541 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:53
2025-08-03 10:26:56.683 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:197
2025-08-03 10:26:56.684 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:197,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:56.684 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:26:56.684 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:197
2025-08-03 10:26:56.684 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:197,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:26:56.684 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:197,source_light_Type:A_SourceLightType
2025-08-03 10:26:56.684 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:197,source_light_Type:B_SourceLightType
2025-08-03 10:26:56.684 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：197,A_SourceLightType
2025-08-03 10:26:56.684 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：197,B_SourceLightType
2025-08-03 10:26:56.856 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;197/261,
2025-08-03 10:26:56.866 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:26:56.907 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:26:57.145 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:26:57.147 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":197,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_197_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:57.252 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 198
2025-08-03 10:26:57.252 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 198
2025-08-03 10:26:57.252 [Thd =44]  Info Default  开始扫描条带； [198/261]
2025-08-03 10:26:57.261 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:26:57.264 [Thd =70]  Info Default CaptureBeginX: 70.08920, CaptureBeginY:-27.38004, CaptureEndX:-70.05968, CaptureEndY:-27.38004, VectorBeginX:71.65409, VectorBeginY:-27.38004, VectorEndX:-72.01617, VectorEndY:-27.38004, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:26:57.264 [Thd =70]  Info Default ***row:198, vectorBeginX:71.654, vectorBeginY:-27.380, captureBeginX:70.089, captureBeginY:-27.380, captureEndX:-70.060, captureEndY:-27.380, vectorEndX:-72.016, vectorEndY:-27.380
2025-08-03 10:26:57.264 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:26:57.265 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0892030900013,EndPoint:70.059678103876
2025-08-03 10:26:57.625 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:26:57.628 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":197,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_197_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:26:58.557 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:26:58
2025-08-03 10:26:58.570 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:26:58
2025-08-03 10:27:02.120 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:198
2025-08-03 10:27:02.120 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:198
2025-08-03 10:27:02.121 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:198,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:02.121 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:02.121 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:198,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:02.121 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:198,source_light_Type:A_SourceLightType
2025-08-03 10:27:02.121 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:198,source_light_Type:B_SourceLightType
2025-08-03 10:27:02.122 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：198,A_SourceLightType
2025-08-03 10:27:02.122 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：198,B_SourceLightType
2025-08-03 10:27:02.297 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;198/261,
2025-08-03 10:27:02.306 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:27:02.360 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:27:02.579 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:27:02.582 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":198,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_198_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:02.709 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 199
2025-08-03 10:27:02.709 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 199
2025-08-03 10:27:02.709 [Thd =69]  Info Default  开始扫描条带； [199/261]
2025-08-03 10:27:02.718 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:27:02.721 [Thd =70]  Info Default ***row:199, vectorBeginX:-72.016, vectorBeginY:-27.808, captureBeginX:-70.397, captureBeginY:-27.808, captureEndX:69.752, captureEndY:-27.808, vectorEndX:71.654, vectorEndY:-27.808
2025-08-03 10:27:02.721 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:02.723 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3970821390399,EndPoint:-69.7517990548374
2025-08-03 10:27:03.050 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:27:03.052 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":198,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_198_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:04.591 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:27:04
2025-08-03 10:27:04.611 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:27:04
2025-08-03 10:27:05.395 [Thd =31]  Error Default CameraImageError！strip_idx:199, PreAdjustImg iret:1 
2025-08-03 10:27:07.572 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:199
2025-08-03 10:27:07.572 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:199,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:07.572 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:07.742 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;199/261,
2025-08-03 10:27:08.625 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:27:08
2025-08-03 10:27:08.652 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:27:08
2025-08-03 10:27:15.177 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:27:15
2025-08-03 10:27:15.196 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:27:15
2025-08-03 10:27:17.752 [Thd =70]  Error Default ====================== Star Rescan ======================
2025-08-03 10:27:17.752 [Thd =70]  Info Default Singleton.ReleaseStripData Clear the temporary strip queue!Count：1
2025-08-03 10:27:19.703 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:27:19
2025-08-03 10:27:19.714 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:27:19
2025-08-03 10:27:23.172 [Thd =70]  Error Default ========rescan=====Velocity:30=========
2025-08-03 10:27:23.322 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 199
2025-08-03 10:27:23.322 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 199
2025-08-03 10:27:23.322 [Thd =44]  Info Default  开始扫描条带； [199/261]
2025-08-03 10:27:23.338 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:27:23.340 [Thd =70]  Info Default ***row:199, vectorBeginX:-72.016, vectorBeginY:-27.808, captureBeginX:-70.397, captureBeginY:-27.808, captureEndX:69.752, captureEndY:-27.808, vectorEndX:71.654, vectorEndY:-27.808
2025-08-03 10:27:23.341 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:23.342 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3970821390399,EndPoint:-69.7517990548374
2025-08-03 10:27:28.195 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:199
2025-08-03 10:27:28.195 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:199,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:28.195 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:28.196 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:199
2025-08-03 10:27:28.196 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:199,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:28.196 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:199,source_light_Type:A_SourceLightType
2025-08-03 10:27:28.196 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:199,source_light_Type:B_SourceLightType
2025-08-03 10:27:28.197 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：199,A_SourceLightType
2025-08-03 10:27:28.197 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：199,B_SourceLightType
2025-08-03 10:27:28.371 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;199/261,
2025-08-03 10:27:28.381 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:27:28.421 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:27:29.162 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 200
2025-08-03 10:27:29.162 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 200
2025-08-03 10:27:29.162 [Thd =67]  Info Default  开始扫描条带； [200/261]
2025-08-03 10:27:29.171 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:27:29.174 [Thd =70]  Info Default CaptureBeginX: 70.08924, CaptureBeginY:-28.23666, CaptureEndX:-70.05964, CaptureEndY:-28.23666, VectorBeginX:71.65413, VectorBeginY:-28.23666, VectorEndX:-72.01613, VectorEndY:-28.23666, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:27:29.174 [Thd =70]  Info Default ***row:200, vectorBeginX:71.654, vectorBeginY:-28.237, captureBeginX:70.089, captureBeginY:-28.237, captureEndX:-70.060, captureEndY:-28.237, vectorEndX:-72.016, vectorEndY:-28.237
2025-08-03 10:27:29.174 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:29.176 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0892401813406,EndPoint:70.0596410125367
2025-08-03 10:27:29.224 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:27:29.227 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":199,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_199_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:29.723 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:27:29.726 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":199,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_199_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:34.025 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:200
2025-08-03 10:27:34.026 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:200,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:34.026 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:34.027 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:200
2025-08-03 10:27:34.028 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:200,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:34.028 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:200,source_light_Type:A_SourceLightType
2025-08-03 10:27:34.028 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:200,source_light_Type:B_SourceLightType
2025-08-03 10:27:34.028 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：200,A_SourceLightType
2025-08-03 10:27:34.028 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：200,B_SourceLightType
2025-08-03 10:27:34.199 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;200/261,
2025-08-03 10:27:34.208 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:27:34.272 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:27:34.489 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:27:34.491 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":200,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_200_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:34.618 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 201
2025-08-03 10:27:34.618 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 201
2025-08-03 10:27:34.618 [Thd =66]  Info Default  开始扫描条带； [201/261]
2025-08-03 10:27:34.627 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:27:34.630 [Thd =70]  Info Default ***row:201, vectorBeginX:-72.016, vectorBeginY:-28.665, captureBeginX:-70.397, captureBeginY:-28.665, captureEndX:69.752, captureEndY:-28.665, vectorEndX:71.654, vectorEndY:-28.665
2025-08-03 10:27:34.630 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:34.633 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3970450477006,EndPoint:-69.7518361461767
2025-08-03 10:27:34.961 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:27:34.964 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":200,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_200_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:39.481 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:201
2025-08-03 10:27:39.482 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:201,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:39.482 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:39.483 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:201
2025-08-03 10:27:39.483 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:201,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:39.483 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:201,source_light_Type:A_SourceLightType
2025-08-03 10:27:39.483 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:201,source_light_Type:B_SourceLightType
2025-08-03 10:27:39.484 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：201,A_SourceLightType
2025-08-03 10:27:39.484 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：201,B_SourceLightType
2025-08-03 10:27:39.653 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;201/261,
2025-08-03 10:27:39.662 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:27:39.704 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:27:39.944 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:27:39.946 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":201,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_201_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:40.050 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 202
2025-08-03 10:27:40.050 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 202
2025-08-03 10:27:40.050 [Thd =44]  Info Default  开始扫描条带； [202/261]
2025-08-03 10:27:40.059 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:27:40.062 [Thd =70]  Info Default CaptureBeginX: 70.08928, CaptureBeginY:-29.09329, CaptureEndX:-70.05960, CaptureEndY:-29.09329, VectorBeginX:71.65417, VectorBeginY:-29.09329, VectorEndX:-72.01609, VectorEndY:-29.09329, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:27:40.062 [Thd =70]  Info Default ***row:202, vectorBeginX:71.654, vectorBeginY:-29.093, captureBeginX:70.089, captureBeginY:-29.093, captureEndX:-70.060, captureEndY:-29.093, vectorEndX:-72.016, vectorEndY:-29.093
2025-08-03 10:27:40.062 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:40.064 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0892772726799,EndPoint:70.0596039211974
2025-08-03 10:27:40.421 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:27:40.424 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":201,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_201_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:44.913 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:202
2025-08-03 10:27:44.914 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:202,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:44.914 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:44.916 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:202
2025-08-03 10:27:44.916 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:202,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:44.917 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:202,source_light_Type:A_SourceLightType
2025-08-03 10:27:44.917 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：202,A_SourceLightType
2025-08-03 10:27:44.917 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：202,B_SourceLightType
2025-08-03 10:27:44.917 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:202,source_light_Type:B_SourceLightType
2025-08-03 10:27:45.087 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;202/261,
2025-08-03 10:27:45.096 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:27:45.146 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:27:45.372 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:27:45.374 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":202,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_202_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:45.482 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 203
2025-08-03 10:27:45.482 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 203
2025-08-03 10:27:45.482 [Thd =35]  Info Default  开始扫描条带； [203/261]
2025-08-03 10:27:45.491 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:27:45.494 [Thd =70]  Info Default ***row:203, vectorBeginX:-72.016, vectorBeginY:-29.522, captureBeginX:-70.397, captureBeginY:-29.522, captureEndX:69.752, captureEndY:-29.522, vectorEndX:71.654, vectorEndY:-29.522
2025-08-03 10:27:45.494 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:45.496 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3970079563613,EndPoint:-69.751873237516
2025-08-03 10:27:45.861 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:27:45.864 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":202,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_202_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:47.541 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:27:47
2025-08-03 10:27:47.553 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:27:47
2025-08-03 10:27:50.346 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:203
2025-08-03 10:27:50.346 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:203,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:50.346 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:50.348 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:203
2025-08-03 10:27:50.348 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:203,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:50.348 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:203,source_light_Type:A_SourceLightType
2025-08-03 10:27:50.348 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:203,source_light_Type:B_SourceLightType
2025-08-03 10:27:50.348 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：203,A_SourceLightType
2025-08-03 10:27:50.348 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：203,B_SourceLightType
2025-08-03 10:27:50.524 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;203/261,
2025-08-03 10:27:50.533 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:27:50.584 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:27:50.804 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:27:50.807 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":203,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_203_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:50.929 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 204
2025-08-03 10:27:50.929 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 204
2025-08-03 10:27:50.929 [Thd =67]  Info Default  开始扫描条带； [204/261]
2025-08-03 10:27:50.938 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:27:50.941 [Thd =70]  Info Default CaptureBeginX: 70.08931, CaptureBeginY:-29.94991, CaptureEndX:-70.05957, CaptureEndY:-29.94991, VectorBeginX:71.65420, VectorBeginY:-29.94991, VectorEndX:-72.01606, VectorEndY:-29.94991, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:27:50.941 [Thd =70]  Info Default ***row:204, vectorBeginX:71.654, vectorBeginY:-29.950, captureBeginX:70.089, captureBeginY:-29.950, captureEndX:-70.060, captureEndY:-29.950, vectorEndX:-72.016, vectorEndY:-29.950
2025-08-03 10:27:50.941 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:50.942 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0893143640192,EndPoint:70.0595668298581
2025-08-03 10:27:51.276 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:27:51.279 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":203,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_203_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:52.068 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:27:52
2025-08-03 10:27:52.090 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:27:52
2025-08-03 10:27:55.788 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:204
2025-08-03 10:27:55.788 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:204,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:55.788 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:27:55.791 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:204
2025-08-03 10:27:55.791 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:204,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:27:55.791 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:204,source_light_Type:A_SourceLightType
2025-08-03 10:27:55.791 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:204,source_light_Type:B_SourceLightType
2025-08-03 10:27:55.791 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：204,A_SourceLightType
2025-08-03 10:27:55.791 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：204,B_SourceLightType
2025-08-03 10:27:55.969 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;204/261,
2025-08-03 10:27:55.978 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:27:56.016 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:27:56.249 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:27:56.251 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":204,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_204_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:56.365 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 205
2025-08-03 10:27:56.365 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 205
2025-08-03 10:27:56.365 [Thd =57]  Info Default  开始扫描条带； [205/261]
2025-08-03 10:27:56.374 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:27:56.377 [Thd =70]  Info Default ***row:205, vectorBeginX:-72.016, vectorBeginY:-30.378, captureBeginX:-70.397, captureBeginY:-30.378, captureEndX:69.752, captureEndY:-30.378, vectorEndX:71.654, vectorEndY:-30.378
2025-08-03 10:27:56.377 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:27:56.379 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.396970865022,EndPoint:-69.7519103288552
2025-08-03 10:27:56.727 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:27:56.730 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":204,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_204_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:27:58.112 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:27:58
2025-08-03 10:27:58.125 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:27:58
2025-08-03 10:28:01.226 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:205
2025-08-03 10:28:01.226 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:205,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:01.226 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:01.228 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:205
2025-08-03 10:28:01.228 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:205,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:01.228 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:205,source_light_Type:A_SourceLightType
2025-08-03 10:28:01.228 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:205,source_light_Type:B_SourceLightType
2025-08-03 10:28:01.228 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：205,A_SourceLightType
2025-08-03 10:28:01.229 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：205,B_SourceLightType
2025-08-03 10:28:01.402 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;205/261,
2025-08-03 10:28:01.412 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:01.465 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:01.686 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:01.689 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":205,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_205_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:01.811 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 206
2025-08-03 10:28:01.811 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 206
2025-08-03 10:28:01.811 [Thd =50]  Info Default  开始扫描条带； [206/261]
2025-08-03 10:28:01.820 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:28:01.823 [Thd =70]  Info Default CaptureBeginX: 70.08935, CaptureBeginY:-30.80654, CaptureEndX:-70.05953, CaptureEndY:-30.80654, VectorBeginX:71.65424, VectorBeginY:-30.80654, VectorEndX:-72.01602, VectorEndY:-30.80654, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:28:01.823 [Thd =70]  Info Default ***row:206, vectorBeginX:71.654, vectorBeginY:-30.807, captureBeginX:70.089, captureBeginY:-30.807, captureEndX:-70.060, captureEndY:-30.807, vectorEndX:-72.016, vectorEndY:-30.807
2025-08-03 10:28:01.823 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:01.825 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0893514553585,EndPoint:70.0595297385188
2025-08-03 10:28:02.163 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:02.166 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":205,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_205_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:03.643 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:03
2025-08-03 10:28:03.656 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:03
2025-08-03 10:28:06.670 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:206
2025-08-03 10:28:06.670 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:206,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:06.670 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:06.673 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:206
2025-08-03 10:28:06.673 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:206,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:06.673 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:206,source_light_Type:A_SourceLightType
2025-08-03 10:28:06.673 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:206,source_light_Type:B_SourceLightType
2025-08-03 10:28:06.673 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：206,A_SourceLightType
2025-08-03 10:28:06.673 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：206,B_SourceLightType
2025-08-03 10:28:06.849 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;206/261,
2025-08-03 10:28:06.858 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:06.902 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:07.137 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:07.139 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":206,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_206_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:07.248 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 207
2025-08-03 10:28:07.248 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 207
2025-08-03 10:28:07.248 [Thd =67]  Info Default  开始扫描条带； [207/261]
2025-08-03 10:28:07.257 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:28:07.259 [Thd =70]  Info Default ***row:207, vectorBeginX:-72.016, vectorBeginY:-31.235, captureBeginX:-70.397, captureBeginY:-31.235, captureEndX:69.752, captureEndY:-31.235, vectorEndX:71.654, vectorEndY:-31.235
2025-08-03 10:28:07.260 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:07.262 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3969337736827,EndPoint:-69.7519474201945
2025-08-03 10:28:07.613 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:07.615 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":206,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_206_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:09.175 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:09
2025-08-03 10:28:09.187 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:09
2025-08-03 10:28:12.113 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:207
2025-08-03 10:28:12.114 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:207,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:12.114 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:12.116 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:207
2025-08-03 10:28:12.116 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:207,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:12.116 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:207,source_light_Type:A_SourceLightType
2025-08-03 10:28:12.116 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:207,source_light_Type:B_SourceLightType
2025-08-03 10:28:12.116 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：207,A_SourceLightType
2025-08-03 10:28:12.116 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：207,B_SourceLightType
2025-08-03 10:28:12.289 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;207/261,
2025-08-03 10:28:12.298 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:12.339 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:12.576 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:12.578 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":207,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_207_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:12.686 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 208
2025-08-03 10:28:12.686 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 208
2025-08-03 10:28:12.686 [Thd =35]  Info Default  开始扫描条带； [208/261]
2025-08-03 10:28:12.695 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:28:12.698 [Thd =70]  Info Default CaptureBeginX: 70.08939, CaptureBeginY:-31.66316, CaptureEndX:-70.05949, CaptureEndY:-31.66316, VectorBeginX:71.65428, VectorBeginY:-31.66316, VectorEndX:-72.01598, VectorEndY:-31.66316, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:28:12.698 [Thd =70]  Info Default ***row:208, vectorBeginX:71.654, vectorBeginY:-31.663, captureBeginX:70.089, captureBeginY:-31.663, captureEndX:-70.059, captureEndY:-31.663, vectorEndX:-72.016, vectorEndY:-31.663
2025-08-03 10:28:12.698 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:12.699 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0893885466977,EndPoint:70.0594926471795
2025-08-03 10:28:13.049 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:13.052 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":207,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_207_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:13.204 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:13
2025-08-03 10:28:13.217 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:13
2025-08-03 10:28:17.551 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:208
2025-08-03 10:28:17.552 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:208,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:17.552 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:17.553 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:208
2025-08-03 10:28:17.553 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:208,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:17.553 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:208,source_light_Type:A_SourceLightType
2025-08-03 10:28:17.553 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:208,source_light_Type:B_SourceLightType
2025-08-03 10:28:17.553 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：208,A_SourceLightType
2025-08-03 10:28:17.553 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：208,B_SourceLightType
2025-08-03 10:28:17.722 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;208/261,
2025-08-03 10:28:17.731 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:17.783 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:18.016 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:18.018 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":208,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_208_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:18.132 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 209
2025-08-03 10:28:18.132 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 209
2025-08-03 10:28:18.132 [Thd =35]  Info Default  开始扫描条带； [209/261]
2025-08-03 10:28:18.150 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:28:18.153 [Thd =70]  Info Default ***row:209, vectorBeginX:-72.016, vectorBeginY:-32.091, captureBeginX:-70.397, captureBeginY:-32.091, captureEndX:69.752, captureEndY:-32.091, vectorEndX:71.654, vectorEndY:-32.091
2025-08-03 10:28:18.153 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:18.155 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3968966823434,EndPoint:-69.7519845115338
2025-08-03 10:28:18.488 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:18.490 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":208,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_208_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:19.738 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:19
2025-08-03 10:28:19.751 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:19
2025-08-03 10:28:23.007 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:209
2025-08-03 10:28:23.007 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:209,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:23.007 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:23.009 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:209
2025-08-03 10:28:23.010 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:209,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:23.010 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:209,source_light_Type:A_SourceLightType
2025-08-03 10:28:23.010 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:209,source_light_Type:B_SourceLightType
2025-08-03 10:28:23.010 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：209,A_SourceLightType
2025-08-03 10:28:23.010 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：209,B_SourceLightType
2025-08-03 10:28:23.187 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;209/261,
2025-08-03 10:28:23.196 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:23.250 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:23.467 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:23.469 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":209,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_209_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:23.594 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 210
2025-08-03 10:28:23.594 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 210
2025-08-03 10:28:23.594 [Thd =51]  Info Default  开始扫描条带； [210/261]
2025-08-03 10:28:23.607 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:28:23.610 [Thd =70]  Info Default CaptureBeginX: 70.08943, CaptureBeginY:-32.51979, CaptureEndX:-70.05946, CaptureEndY:-32.51979, VectorBeginX:71.65432, VectorBeginY:-32.51979, VectorEndX:-72.01594, VectorEndY:-32.51979, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:28:23.610 [Thd =70]  Info Default ***row:210, vectorBeginX:71.654, vectorBeginY:-32.520, captureBeginX:70.089, captureBeginY:-32.520, captureEndX:-70.059, captureEndY:-32.520, vectorEndX:-72.016, vectorEndY:-32.520
2025-08-03 10:28:23.610 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:23.611 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.089425638037,EndPoint:70.0594555558402
2025-08-03 10:28:23.938 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:23.940 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":209,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_209_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:24.768 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:24
2025-08-03 10:28:24.781 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:24
2025-08-03 10:28:28.461 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:210
2025-08-03 10:28:28.461 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:210,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:28.461 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:28.463 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:210
2025-08-03 10:28:28.463 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:210,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:28.463 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:210,source_light_Type:A_SourceLightType
2025-08-03 10:28:28.463 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:210,source_light_Type:B_SourceLightType
2025-08-03 10:28:28.463 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：210,A_SourceLightType
2025-08-03 10:28:28.463 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：210,B_SourceLightType
2025-08-03 10:28:28.635 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;210/261,
2025-08-03 10:28:28.645 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:28.681 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:28.921 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:28.923 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":210,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_210_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:29.027 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 211
2025-08-03 10:28:29.027 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 211
2025-08-03 10:28:29.027 [Thd =51]  Info Default  开始扫描条带； [211/261]
2025-08-03 10:28:29.036 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:28:29.039 [Thd =70]  Info Default ***row:211, vectorBeginX:-72.016, vectorBeginY:-32.948, captureBeginX:-70.397, captureBeginY:-32.948, captureEndX:69.752, captureEndY:-32.948, vectorEndX:71.654, vectorEndY:-32.948
2025-08-03 10:28:29.039 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:29.041 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3968595910041,EndPoint:-69.7520216028731
2025-08-03 10:28:29.398 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:29.400 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":210,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_210_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:30.801 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:30
2025-08-03 10:28:30.825 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:30
2025-08-03 10:28:33.888 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:211
2025-08-03 10:28:33.889 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:211,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:33.889 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:33.891 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:211
2025-08-03 10:28:33.891 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:211,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:33.891 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:211,source_light_Type:A_SourceLightType
2025-08-03 10:28:33.891 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:211,source_light_Type:B_SourceLightType
2025-08-03 10:28:33.891 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：211,A_SourceLightType
2025-08-03 10:28:33.892 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：211,B_SourceLightType
2025-08-03 10:28:34.067 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;211/261,
2025-08-03 10:28:34.077 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:34.148 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:34.348 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:34.350 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":211,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_211_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:34.491 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 212
2025-08-03 10:28:34.491 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 212
2025-08-03 10:28:34.491 [Thd =44]  Info Default  开始扫描条带； [212/261]
2025-08-03 10:28:34.500 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:28:34.503 [Thd =70]  Info Default CaptureBeginX: 70.08946, CaptureBeginY:-33.37641, CaptureEndX:-70.05942, CaptureEndY:-33.37641, VectorBeginX:71.65435, VectorBeginY:-33.37641, VectorEndX:-72.01591, VectorEndY:-33.37641, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:28:34.503 [Thd =70]  Info Default ***row:212, vectorBeginX:71.654, vectorBeginY:-33.376, captureBeginX:70.089, captureBeginY:-33.376, captureEndX:-70.059, captureEndY:-33.376, vectorEndX:-72.016, vectorEndY:-33.376
2025-08-03 10:28:34.503 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:34.505 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0894627293763,EndPoint:70.0594184645009
2025-08-03 10:28:34.821 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:34.823 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":211,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_211_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:34.838 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:34
2025-08-03 10:28:34.852 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:34
2025-08-03 10:28:39.352 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:212
2025-08-03 10:28:39.352 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:212,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:39.352 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:39.352 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:212
2025-08-03 10:28:39.353 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:212,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:39.353 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:212,source_light_Type:A_SourceLightType
2025-08-03 10:28:39.353 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:212,source_light_Type:B_SourceLightType
2025-08-03 10:28:39.353 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：212,A_SourceLightType
2025-08-03 10:28:39.353 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：212,B_SourceLightType
2025-08-03 10:28:39.534 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;212/261,
2025-08-03 10:28:39.544 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:39.585 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:39.814 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:39.817 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":212,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_212_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:39.922 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 213
2025-08-03 10:28:39.922 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 213
2025-08-03 10:28:39.922 [Thd =35]  Info Default  开始扫描条带； [213/261]
2025-08-03 10:28:39.931 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:28:39.934 [Thd =70]  Info Default ***row:213, vectorBeginX:-72.016, vectorBeginY:-33.805, captureBeginX:-70.397, captureBeginY:-33.805, captureEndX:69.752, captureEndY:-33.805, vectorEndX:71.654, vectorEndY:-33.805
2025-08-03 10:28:39.934 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:39.934 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3968224996648,EndPoint:-69.7520586942124
2025-08-03 10:28:40.298 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:40.300 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":212,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_212_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:41.375 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:41
2025-08-03 10:28:41.387 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:41
2025-08-03 10:28:44.782 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:213
2025-08-03 10:28:44.782 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:213,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:44.782 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:44.784 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:213
2025-08-03 10:28:44.784 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:213,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:44.784 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:213,source_light_Type:A_SourceLightType
2025-08-03 10:28:44.784 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:213,source_light_Type:B_SourceLightType
2025-08-03 10:28:44.784 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：213,A_SourceLightType
2025-08-03 10:28:44.784 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：213,B_SourceLightType
2025-08-03 10:28:44.950 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;213/261,
2025-08-03 10:28:44.959 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:44.996 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:45.242 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:45.244 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":213,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_213_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:45.334 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 214
2025-08-03 10:28:45.334 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 214
2025-08-03 10:28:45.334 [Thd =41]  Info Default  开始扫描条带； [214/261]
2025-08-03 10:28:45.343 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:28:45.346 [Thd =70]  Info Default CaptureBeginX: 70.08950, CaptureBeginY:-34.23304, CaptureEndX:-70.05938, CaptureEndY:-34.23304, VectorBeginX:71.65439, VectorBeginY:-34.23304, VectorEndX:-72.01587, VectorEndY:-34.23304, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:28:45.346 [Thd =70]  Info Default ***row:214, vectorBeginX:71.654, vectorBeginY:-34.233, captureBeginX:70.089, captureBeginY:-34.233, captureEndX:-70.059, captureEndY:-34.233, vectorEndX:-72.016, vectorEndY:-34.233
2025-08-03 10:28:45.346 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:45.348 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0894998207156,EndPoint:70.0593813731616
2025-08-03 10:28:45.722 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:45.724 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":213,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_213_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:45.903 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:45
2025-08-03 10:28:45.917 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:45
2025-08-03 10:28:50.195 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:214
2025-08-03 10:28:50.195 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:214,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:50.195 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:50.231 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:214
2025-08-03 10:28:50.231 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:214,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:50.231 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:214,source_light_Type:B_SourceLightType
2025-08-03 10:28:50.231 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:214,source_light_Type:A_SourceLightType
2025-08-03 10:28:50.231 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：214,B_SourceLightType
2025-08-03 10:28:50.231 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：214,A_SourceLightType
2025-08-03 10:28:50.367 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;214/261,
2025-08-03 10:28:50.376 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:50.427 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:50.695 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:50.697 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":214,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_214_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:50.763 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 215
2025-08-03 10:28:50.763 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 215
2025-08-03 10:28:50.763 [Thd =51]  Info Default  开始扫描条带； [215/261]
2025-08-03 10:28:50.772 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:28:50.775 [Thd =70]  Info Default ***row:215, vectorBeginX:-72.016, vectorBeginY:-34.661, captureBeginX:-70.397, captureBeginY:-34.661, captureEndX:69.752, captureEndY:-34.661, vectorEndX:71.654, vectorEndY:-34.661
2025-08-03 10:28:50.775 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:50.776 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3967854083255,EndPoint:-69.7520957855517
2025-08-03 10:28:51.202 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:51.204 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":214,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_214_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:51.936 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:51
2025-08-03 10:28:51.948 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:51
2025-08-03 10:28:55.624 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:215
2025-08-03 10:28:55.624 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:215,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:55.624 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:28:55.627 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:215
2025-08-03 10:28:55.627 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:215,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:28:55.627 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:215,source_light_Type:A_SourceLightType
2025-08-03 10:28:55.627 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:215,source_light_Type:B_SourceLightType
2025-08-03 10:28:55.627 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：215,A_SourceLightType
2025-08-03 10:28:55.627 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：215,B_SourceLightType
2025-08-03 10:28:55.802 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;215/261,
2025-08-03 10:28:55.811 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:28:55.868 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:28:56.094 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:28:56.108 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":215,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_215_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:56.206 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 216
2025-08-03 10:28:56.206 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 216
2025-08-03 10:28:56.206 [Thd =66]  Info Default  开始扫描条带； [216/261]
2025-08-03 10:28:56.215 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:28:56.217 [Thd =70]  Info Default CaptureBeginX: 70.08954, CaptureBeginY:-35.08966, CaptureEndX:-70.05934, CaptureEndY:-35.08966, VectorBeginX:71.65443, VectorBeginY:-35.08966, VectorEndX:-72.01583, VectorEndY:-35.08966, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:28:56.217 [Thd =70]  Info Default ***row:216, vectorBeginX:71.654, vectorBeginY:-35.090, captureBeginX:70.090, captureBeginY:-35.090, captureEndX:-70.059, captureEndY:-35.090, vectorEndX:-72.016, vectorEndY:-35.090
2025-08-03 10:28:56.218 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:28:56.220 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0895369120549,EndPoint:70.0593442818223
2025-08-03 10:28:56.580 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:28:56.582 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":215,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_215_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:28:56.966 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:28:56
2025-08-03 10:28:56.977 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:28:56
2025-08-03 10:29:01.065 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:216
2025-08-03 10:29:01.065 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:216,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:01.065 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:01.067 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:216
2025-08-03 10:29:01.067 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:216,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:01.067 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:216,source_light_Type:A_SourceLightType
2025-08-03 10:29:01.067 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:216,source_light_Type:B_SourceLightType
2025-08-03 10:29:01.067 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：216,A_SourceLightType
2025-08-03 10:29:01.067 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：216,B_SourceLightType
2025-08-03 10:29:01.243 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;216/261,
2025-08-03 10:29:01.252 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:01.297 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:01.524 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:01.526 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":216,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_216_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:01.643 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 217
2025-08-03 10:29:01.643 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 217
2025-08-03 10:29:01.643 [Thd =47]  Info Default  开始扫描条带； [217/261]
2025-08-03 10:29:01.652 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:29:01.655 [Thd =70]  Info Default ***row:217, vectorBeginX:-72.016, vectorBeginY:-35.518, captureBeginX:-70.397, captureBeginY:-35.518, captureEndX:69.752, captureEndY:-35.518, vectorEndX:71.654, vectorEndY:-35.518
2025-08-03 10:29:01.655 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:01.657 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3967483169862,EndPoint:-69.752132876891
2025-08-03 10:29:02.018 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:02.021 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":216,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_216_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:03.002 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:03
2025-08-03 10:29:03.018 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:03
2025-08-03 10:29:06.503 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:217
2025-08-03 10:29:06.504 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:217,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:06.504 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:06.505 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:217
2025-08-03 10:29:06.505 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:217,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:06.505 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:217,source_light_Type:A_SourceLightType
2025-08-03 10:29:06.505 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:217,source_light_Type:B_SourceLightType
2025-08-03 10:29:06.505 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：217,A_SourceLightType
2025-08-03 10:29:06.506 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：217,B_SourceLightType
2025-08-03 10:29:06.680 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;217/261,
2025-08-03 10:29:06.689 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:06.754 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:06.963 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:06.968 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":217,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_217_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:07.090 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 218
2025-08-03 10:29:07.090 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 218
2025-08-03 10:29:07.090 [Thd =41]  Info Default  开始扫描条带； [218/261]
2025-08-03 10:29:07.100 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:29:07.103 [Thd =70]  Info Default CaptureBeginX: 70.08957, CaptureBeginY:-35.94629, CaptureEndX:-70.05931, CaptureEndY:-35.94629, VectorBeginX:71.65446, VectorBeginY:-35.94629, VectorEndX:-72.01580, VectorEndY:-35.94629, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:29:07.103 [Thd =70]  Info Default ***row:218, vectorBeginX:71.654, vectorBeginY:-35.946, captureBeginX:70.090, captureBeginY:-35.946, captureEndX:-70.059, captureEndY:-35.946, vectorEndX:-72.016, vectorEndY:-35.946
2025-08-03 10:29:07.103 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:07.105 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0895740033942,EndPoint:70.059307190483
2025-08-03 10:29:07.438 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:07.441 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":217,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_217_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:08.536 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:08
2025-08-03 10:29:08.550 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:08
2025-08-03 10:29:11.950 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:218
2025-08-03 10:29:11.950 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:218,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:11.950 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:11.952 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:218
2025-08-03 10:29:11.952 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:218,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:11.952 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:218,source_light_Type:A_SourceLightType
2025-08-03 10:29:11.953 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:218,source_light_Type:B_SourceLightType
2025-08-03 10:29:11.953 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：218,A_SourceLightType
2025-08-03 10:29:11.953 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：218,B_SourceLightType
2025-08-03 10:29:12.126 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;218/261,
2025-08-03 10:29:12.135 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:12.184 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:12.415 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:12.418 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":218,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_218_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:12.518 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 219
2025-08-03 10:29:12.518 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 219
2025-08-03 10:29:12.518 [Thd =51]  Info Default  开始扫描条带； [219/261]
2025-08-03 10:29:12.527 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:29:12.529 [Thd =70]  Info Default ***row:219, vectorBeginX:-72.016, vectorBeginY:-36.375, captureBeginX:-70.397, captureBeginY:-36.375, captureEndX:69.752, captureEndY:-36.375, vectorEndX:71.654, vectorEndY:-36.375
2025-08-03 10:29:12.530 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:12.532 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3967112256469,EndPoint:-69.7521699682303
2025-08-03 10:29:12.897 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:12.899 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":218,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_218_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:14.071 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:14
2025-08-03 10:29:14.083 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:14
2025-08-03 10:29:17.380 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:219
2025-08-03 10:29:17.380 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:219,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:17.380 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:17.382 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:219
2025-08-03 10:29:17.382 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:219,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:17.382 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:219,source_light_Type:A_SourceLightType
2025-08-03 10:29:17.382 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:219,source_light_Type:B_SourceLightType
2025-08-03 10:29:17.382 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：219,A_SourceLightType
2025-08-03 10:29:17.382 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：219,B_SourceLightType
2025-08-03 10:29:17.554 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;219/261,
2025-08-03 10:29:17.563 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:17.603 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:17.847 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:17.850 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":219,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_219_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:17.938 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 220
2025-08-03 10:29:17.938 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 220
2025-08-03 10:29:17.938 [Thd =69]  Info Default  开始扫描条带； [220/261]
2025-08-03 10:29:17.950 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:29:17.953 [Thd =70]  Info Default CaptureBeginX: 70.08961, CaptureBeginY:-36.80292, CaptureEndX:-70.05927, CaptureEndY:-36.80292, VectorBeginX:71.65450, VectorBeginY:-36.80292, VectorEndX:-72.01576, VectorEndY:-36.80292, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:29:17.953 [Thd =70]  Info Default ***row:220, vectorBeginX:71.655, vectorBeginY:-36.803, captureBeginX:70.090, captureBeginY:-36.803, captureEndX:-70.059, captureEndY:-36.803, vectorEndX:-72.016, vectorEndY:-36.803
2025-08-03 10:29:17.953 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:17.955 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0896110947335,EndPoint:70.0592700991437
2025-08-03 10:29:18.337 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:18.339 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":219,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_219_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:18.598 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:18
2025-08-03 10:29:18.610 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:18
2025-08-03 10:29:22.808 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:220
2025-08-03 10:29:22.808 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:220,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:22.808 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:22.966 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:220
2025-08-03 10:29:22.966 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:220,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:22.966 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:220,source_light_Type:B_SourceLightType
2025-08-03 10:29:22.966 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:220,source_light_Type:A_SourceLightType
2025-08-03 10:29:22.966 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：220,B_SourceLightType
2025-08-03 10:29:22.966 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：220,A_SourceLightType
2025-08-03 10:29:22.980 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;220/261,
2025-08-03 10:29:22.989 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:23.036 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:23.377 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 221
2025-08-03 10:29:23.377 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 221
2025-08-03 10:29:23.377 [Thd =66]  Info Default  开始扫描条带； [221/261]
2025-08-03 10:29:23.386 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:29:23.389 [Thd =70]  Info Default ***row:221, vectorBeginX:-72.016, vectorBeginY:-37.231, captureBeginX:-70.397, captureBeginY:-37.231, captureEndX:69.752, captureEndY:-37.231, vectorEndX:71.655, vectorEndY:-37.231
2025-08-03 10:29:23.389 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:23.390 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3966741343076,EndPoint:-69.7522070595696
2025-08-03 10:29:23.426 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:23.428 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":220,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_220_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:23.912 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:23.915 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":220,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_220_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:25.132 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:25
2025-08-03 10:29:25.144 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:25
2025-08-03 10:29:28.237 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:221
2025-08-03 10:29:28.238 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:221,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:28.238 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:28.239 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:221
2025-08-03 10:29:28.239 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:221,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:28.240 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:221,source_light_Type:A_SourceLightType
2025-08-03 10:29:28.240 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：221,A_SourceLightType
2025-08-03 10:29:28.240 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：221,B_SourceLightType
2025-08-03 10:29:28.240 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:221,source_light_Type:B_SourceLightType
2025-08-03 10:29:28.412 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;221/261,
2025-08-03 10:29:28.422 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:28.482 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:28.696 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:28.698 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":221,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_221_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:28.817 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 222
2025-08-03 10:29:28.818 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 222
2025-08-03 10:29:28.818 [Thd =65]  Info Default  开始扫描条带； [222/261]
2025-08-03 10:29:28.827 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:29:28.830 [Thd =70]  Info Default CaptureBeginX: 70.08965, CaptureBeginY:-37.65954, CaptureEndX:-70.05923, CaptureEndY:-37.65954, VectorBeginX:71.65454, VectorBeginY:-37.65954, VectorEndX:-72.01572, VectorEndY:-37.65954, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:29:28.830 [Thd =70]  Info Default ***row:222, vectorBeginX:71.655, vectorBeginY:-37.660, captureBeginX:70.090, captureBeginY:-37.660, captureEndX:-70.059, captureEndY:-37.660, vectorEndX:-72.016, vectorEndY:-37.660
2025-08-03 10:29:28.830 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:28.832 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0896481860728,EndPoint:70.0592330078044
2025-08-03 10:29:29.174 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:29.176 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":221,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_221_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:29.660 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:29
2025-08-03 10:29:29.681 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:29
2025-08-03 10:29:33.683 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:222
2025-08-03 10:29:33.683 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:222,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:33.683 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:33.686 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:222
2025-08-03 10:29:33.686 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:222,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:33.686 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:222,source_light_Type:A_SourceLightType
2025-08-03 10:29:33.686 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:222,source_light_Type:B_SourceLightType
2025-08-03 10:29:33.686 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：222,A_SourceLightType
2025-08-03 10:29:33.686 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：222,B_SourceLightType
2025-08-03 10:29:33.862 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;222/261,
2025-08-03 10:29:33.872 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:33.913 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:34.144 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:34.146 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":222,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_222_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:34.249 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 223
2025-08-03 10:29:34.249 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 223
2025-08-03 10:29:34.249 [Thd =42]  Info Default  开始扫描条带； [223/261]
2025-08-03 10:29:34.258 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:29:34.261 [Thd =70]  Info Default ***row:223, vectorBeginX:-72.016, vectorBeginY:-38.088, captureBeginX:-70.397, captureBeginY:-38.088, captureEndX:69.752, captureEndY:-38.088, vectorEndX:71.655, vectorEndY:-38.088
2025-08-03 10:29:34.261 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:34.262 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3966370429683,EndPoint:-69.7522441509089
2025-08-03 10:29:34.617 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:34.620 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":222,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_222_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:35.700 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:35
2025-08-03 10:29:35.713 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:35
2025-08-03 10:29:39.110 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:223
2025-08-03 10:29:39.111 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:223,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:39.111 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:39.113 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:223
2025-08-03 10:29:39.113 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:223,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:39.113 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:223,source_light_Type:A_SourceLightType
2025-08-03 10:29:39.114 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:223,source_light_Type:B_SourceLightType
2025-08-03 10:29:39.114 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：223,A_SourceLightType
2025-08-03 10:29:39.114 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：223,B_SourceLightType
2025-08-03 10:29:39.288 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;223/261,
2025-08-03 10:29:39.298 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:39.356 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:39.570 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:39.573 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":223,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_223_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:39.702 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 224
2025-08-03 10:29:39.702 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 224
2025-08-03 10:29:39.702 [Thd =44]  Info Default  开始扫描条带； [224/261]
2025-08-03 10:29:39.711 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:29:39.714 [Thd =70]  Info Default CaptureBeginX: 70.08969, CaptureBeginY:-38.51617, CaptureEndX:-70.05920, CaptureEndY:-38.51617, VectorBeginX:71.65458, VectorBeginY:-38.51617, VectorEndX:-72.01568, VectorEndY:-38.51617, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:29:39.714 [Thd =70]  Info Default ***row:224, vectorBeginX:71.655, vectorBeginY:-38.516, captureBeginX:70.090, captureBeginY:-38.516, captureEndX:-70.059, captureEndY:-38.516, vectorEndX:-72.016, vectorEndY:-38.516
2025-08-03 10:29:39.714 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:39.715 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0896852774121,EndPoint:70.0591959164651
2025-08-03 10:29:39.727 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:39
2025-08-03 10:29:39.739 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:39
2025-08-03 10:29:40.046 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:40.055 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":223,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_223_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:44.566 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:224
2025-08-03 10:29:44.566 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:224,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:44.566 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:44.568 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:224
2025-08-03 10:29:44.568 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:224,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:44.568 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:224,source_light_Type:A_SourceLightType
2025-08-03 10:29:44.568 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:224,source_light_Type:B_SourceLightType
2025-08-03 10:29:44.568 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：224,A_SourceLightType
2025-08-03 10:29:44.568 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：224,B_SourceLightType
2025-08-03 10:29:44.740 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;224/261,
2025-08-03 10:29:44.749 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:44.792 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:45.027 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:45.030 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":224,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_224_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:45.134 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 225
2025-08-03 10:29:45.134 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 225
2025-08-03 10:29:45.134 [Thd =66]  Info Default  开始扫描条带； [225/261]
2025-08-03 10:29:45.143 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:29:45.146 [Thd =70]  Info Default ***row:225, vectorBeginX:-72.016, vectorBeginY:-38.944, captureBeginX:-70.397, captureBeginY:-38.944, captureEndX:69.752, captureEndY:-38.944, vectorEndX:71.655, vectorEndY:-38.944
2025-08-03 10:29:45.146 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:45.148 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.396599951629,EndPoint:-69.7522812422482
2025-08-03 10:29:45.494 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:45.497 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":224,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_224_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:46.762 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:46
2025-08-03 10:29:46.775 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:46
2025-08-03 10:29:49.998 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:225
2025-08-03 10:29:49.999 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:225,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:49.999 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:50.001 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:225
2025-08-03 10:29:50.001 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:225,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:50.001 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:225,source_light_Type:A_SourceLightType
2025-08-03 10:29:50.001 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:225,source_light_Type:B_SourceLightType
2025-08-03 10:29:50.001 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：225,A_SourceLightType
2025-08-03 10:29:50.002 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：225,B_SourceLightType
2025-08-03 10:29:50.179 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;225/261,
2025-08-03 10:29:50.188 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:50.232 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:50.459 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:50.475 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":225,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_225_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:50.578 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 226
2025-08-03 10:29:50.578 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 226
2025-08-03 10:29:50.578 [Thd =23]  Info Default  开始扫描条带； [226/261]
2025-08-03 10:29:50.587 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:29:50.590 [Thd =70]  Info Default CaptureBeginX: 70.08972, CaptureBeginY:-39.37279, CaptureEndX:-70.05916, CaptureEndY:-39.37279, VectorBeginX:71.65461, VectorBeginY:-39.37279, VectorEndX:-72.01565, VectorEndY:-39.37279, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:29:50.590 [Thd =70]  Info Default ***row:226, vectorBeginX:71.655, vectorBeginY:-39.373, captureBeginX:70.090, captureBeginY:-39.373, captureEndX:-70.059, captureEndY:-39.373, vectorEndX:-72.016, vectorEndY:-39.373
2025-08-03 10:29:50.590 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:50.591 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0897223687514,EndPoint:70.0591588251258
2025-08-03 10:29:50.947 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:50.949 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":225,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_225_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:51.791 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:51
2025-08-03 10:29:51.816 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:51
2025-08-03 10:29:55.438 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:226
2025-08-03 10:29:55.439 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:226,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:55.439 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:29:55.442 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:226
2025-08-03 10:29:55.442 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:226,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:29:55.442 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:226,source_light_Type:A_SourceLightType
2025-08-03 10:29:55.442 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:226,source_light_Type:B_SourceLightType
2025-08-03 10:29:55.442 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：226,A_SourceLightType
2025-08-03 10:29:55.443 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：226,B_SourceLightType
2025-08-03 10:29:55.621 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;226/261,
2025-08-03 10:29:55.630 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:29:55.681 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:29:55.901 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:29:55.903 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":226,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_226_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:56.018 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 227
2025-08-03 10:29:56.018 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 227
2025-08-03 10:29:56.018 [Thd =41]  Info Default  开始扫描条带； [227/261]
2025-08-03 10:29:56.027 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:29:56.030 [Thd =70]  Info Default ***row:227, vectorBeginX:-72.016, vectorBeginY:-39.801, captureBeginX:-70.397, captureBeginY:-39.801, captureEndX:69.752, captureEndY:-39.801, vectorEndX:71.655, vectorEndY:-39.801
2025-08-03 10:29:56.030 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:29:56.032 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3965628602897,EndPoint:-69.7523183335875
2025-08-03 10:29:56.376 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:29:56.378 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":226,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_226_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:29:57.336 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:29:57
2025-08-03 10:29:57.353 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:29:57
2025-08-03 10:30:00.881 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:227
2025-08-03 10:30:00.881 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:227,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:00.881 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:00.938 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:227
2025-08-03 10:30:00.938 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:227,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:00.938 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:227,source_light_Type:B_SourceLightType
2025-08-03 10:30:00.938 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:227,source_light_Type:A_SourceLightType
2025-08-03 10:30:00.939 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：227,B_SourceLightType
2025-08-03 10:30:00.939 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：227,A_SourceLightType
2025-08-03 10:30:01.054 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;227/261,
2025-08-03 10:30:01.064 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:01.108 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:30:01.407 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:30:01.409 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":227,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_227_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:01.455 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 228
2025-08-03 10:30:01.455 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 228
2025-08-03 10:30:01.455 [Thd =66]  Info Default  开始扫描条带； [228/261]
2025-08-03 10:30:01.463 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:30:01.466 [Thd =70]  Info Default CaptureBeginX: 70.08976, CaptureBeginY:-40.22942, CaptureEndX:-70.05912, CaptureEndY:-40.22942, VectorBeginX:71.65465, VectorBeginY:-40.22942, VectorEndX:-72.01561, VectorEndY:-40.22942, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:30:01.466 [Thd =70]  Info Default ***row:228, vectorBeginX:71.655, vectorBeginY:-40.229, captureBeginX:70.090, captureBeginY:-40.229, captureEndX:-70.059, captureEndY:-40.229, vectorEndX:-72.016, vectorEndY:-40.229
2025-08-03 10:30:01.466 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:01.467 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0897594600907,EndPoint:70.0591217337865
2025-08-03 10:30:01.868 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:30:01
2025-08-03 10:30:01.881 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:30:01
2025-08-03 10:30:01.885 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:30:01.888 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":227,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_227_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:06.312 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:228
2025-08-03 10:30:06.312 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:228,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:06.312 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:06.314 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:228
2025-08-03 10:30:06.314 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:228,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:06.314 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:228,source_light_Type:A_SourceLightType
2025-08-03 10:30:06.315 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:228,source_light_Type:B_SourceLightType
2025-08-03 10:30:06.315 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：228,A_SourceLightType
2025-08-03 10:30:06.315 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：228,B_SourceLightType
2025-08-03 10:30:06.494 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;228/261,
2025-08-03 10:30:06.503 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:06.619 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:30:06.798 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:30:06.800 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":228,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_228_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:06.967 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 229
2025-08-03 10:30:06.967 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 229
2025-08-03 10:30:06.967 [Thd =65]  Info Default  开始扫描条带； [229/261]
2025-08-03 10:30:06.976 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:30:06.979 [Thd =70]  Info Default ***row:229, vectorBeginX:-72.016, vectorBeginY:-40.658, captureBeginX:-70.397, captureBeginY:-40.658, captureEndX:69.752, captureEndY:-40.658, vectorEndX:71.655, vectorEndY:-40.658
2025-08-03 10:30:06.979 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:06.981 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3965257689505,EndPoint:-69.7523554249268
2025-08-03 10:30:07.269 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:30:07.272 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":228,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_228_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:08.404 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:30:08
2025-08-03 10:30:08.424 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:30:08
2025-08-03 10:30:11.827 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:229
2025-08-03 10:30:11.828 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:229,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:11.828 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:11.830 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:229
2025-08-03 10:30:11.830 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:229,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:11.830 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:229,source_light_Type:A_SourceLightType
2025-08-03 10:30:11.830 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:229,source_light_Type:B_SourceLightType
2025-08-03 10:30:11.830 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：229,A_SourceLightType
2025-08-03 10:30:11.830 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：229,B_SourceLightType
2025-08-03 10:30:12.005 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;229/261,
2025-08-03 10:30:12.014 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:12.079 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:30:12.289 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:30:12.312 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":229,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_229_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:12.415 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 230
2025-08-03 10:30:12.415 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 230
2025-08-03 10:30:12.415 [Thd =35]  Info Default  开始扫描条带； [230/261]
2025-08-03 10:30:12.424 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:30:12.427 [Thd =70]  Info Default CaptureBeginX: 70.08980, CaptureBeginY:-41.08604, CaptureEndX:-70.05908, CaptureEndY:-41.08604, VectorBeginX:71.65469, VectorBeginY:-41.08604, VectorEndX:-72.01557, VectorEndY:-41.08604, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:30:12.427 [Thd =70]  Info Default ***row:230, vectorBeginX:71.655, vectorBeginY:-41.086, captureBeginX:70.090, captureBeginY:-41.086, captureEndX:-70.059, captureEndY:-41.086, vectorEndX:-72.016, vectorEndY:-41.086
2025-08-03 10:30:12.427 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:12.428 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.08979655143,EndPoint:70.0590846424472
2025-08-03 10:30:12.786 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:30:12.789 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":229,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_229_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:13.441 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:30:13
2025-08-03 10:30:13.462 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:30:13
2025-08-03 10:30:17.273 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:230
2025-08-03 10:30:17.273 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:230,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:17.273 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:17.275 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:230
2025-08-03 10:30:17.275 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:230,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:17.275 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:230,source_light_Type:A_SourceLightType
2025-08-03 10:30:17.275 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:230,source_light_Type:B_SourceLightType
2025-08-03 10:30:17.275 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：230,A_SourceLightType
2025-08-03 10:30:17.276 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：230,B_SourceLightType
2025-08-03 10:30:17.454 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;230/261,
2025-08-03 10:30:17.463 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:17.518 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:30:17.738 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:30:17.741 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":230,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_230_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:17.862 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 231
2025-08-03 10:30:17.862 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 231
2025-08-03 10:30:17.862 [Thd =64]  Info Default  开始扫描条带； [231/261]
2025-08-03 10:30:17.871 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:30:17.874 [Thd =70]  Info Default ***row:231, vectorBeginX:-72.016, vectorBeginY:-41.514, captureBeginX:-70.396, captureBeginY:-41.514, captureEndX:69.752, captureEndY:-41.514, vectorEndX:71.655, vectorEndY:-41.514
2025-08-03 10:30:17.874 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:17.876 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3964886776112,EndPoint:-69.7523925162661
2025-08-03 10:30:18.214 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:30:18.216 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":230,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_230_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:19.243 [Thd =31]  Error Default CameraImageError！strip_idx:231, PreAdjustImg iret:1 
2025-08-03 10:30:19.481 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:30:19
2025-08-03 10:30:19.495 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:30:19
2025-08-03 10:30:22.724 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:231
2025-08-03 10:30:22.724 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:231,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:22.724 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:22.898 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;231/261,
2025-08-03 10:30:24.010 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:30:24
2025-08-03 10:30:24.038 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:30:24
2025-08-03 10:30:29.557 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:30:29
2025-08-03 10:30:29.565 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:30:29
2025-08-03 10:30:32.908 [Thd =70]  Error Default ====================== Star Rescan ======================
2025-08-03 10:30:32.908 [Thd =70]  Info Default Singleton.ReleaseStripData Clear the temporary strip queue!Count：1
2025-08-03 10:30:35.074 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:30:35
2025-08-03 10:30:35.089 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:30:35
2025-08-03 10:30:38.328 [Thd =70]  Error Default ========rescan=====Velocity:30=========
2025-08-03 10:30:38.479 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 231
2025-08-03 10:30:38.479 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 231
2025-08-03 10:30:38.479 [Thd =69]  Info Default  开始扫描条带； [231/261]
2025-08-03 10:30:38.488 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:30:38.491 [Thd =70]  Info Default ***row:231, vectorBeginX:-72.016, vectorBeginY:-41.514, captureBeginX:-70.396, captureBeginY:-41.514, captureEndX:69.752, captureEndY:-41.514, vectorEndX:71.655, vectorEndY:-41.514
2025-08-03 10:30:38.491 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:38.493 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3964886776112,EndPoint:-69.7523925162661
2025-08-03 10:30:43.339 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:231
2025-08-03 10:30:43.339 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:231,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:43.339 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:43.341 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:231
2025-08-03 10:30:43.341 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:231,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:43.341 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:231,source_light_Type:A_SourceLightType
2025-08-03 10:30:43.342 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:231,source_light_Type:B_SourceLightType
2025-08-03 10:30:43.342 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：231,A_SourceLightType
2025-08-03 10:30:43.342 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：231,B_SourceLightType
2025-08-03 10:30:43.517 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;231/261,
2025-08-03 10:30:43.527 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:43.577 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:30:43.792 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:30:43.794 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":231,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_231_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:43.912 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 232
2025-08-03 10:30:43.912 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 232
2025-08-03 10:30:43.912 [Thd =68]  Info Default  开始扫描条带； [232/261]
2025-08-03 10:30:43.921 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:30:43.924 [Thd =70]  Info Default CaptureBeginX: 70.08983, CaptureBeginY:-41.94267, CaptureEndX:-70.05905, CaptureEndY:-41.94267, VectorBeginX:71.65472, VectorBeginY:-41.94267, VectorEndX:-72.01554, VectorEndY:-41.94267, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:30:43.924 [Thd =70]  Info Default ***row:232, vectorBeginX:71.655, vectorBeginY:-41.943, captureBeginX:70.090, captureBeginY:-41.943, captureEndX:-70.059, captureEndY:-41.943, vectorEndX:-72.016, vectorEndY:-41.943
2025-08-03 10:30:43.924 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:43.925 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0898336427693,EndPoint:70.059047551108
2025-08-03 10:30:44.257 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:30:44.260 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":231,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_231_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:48.771 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:232
2025-08-03 10:30:48.771 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:232,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:48.771 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:48.773 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:232
2025-08-03 10:30:48.774 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:232,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:48.774 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:232,source_light_Type:A_SourceLightType
2025-08-03 10:30:48.774 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:232,source_light_Type:B_SourceLightType
2025-08-03 10:30:48.774 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：232,A_SourceLightType
2025-08-03 10:30:48.774 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：232,B_SourceLightType
2025-08-03 10:30:48.948 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;232/261,
2025-08-03 10:30:48.957 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:49.028 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:30:49.225 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:30:49.227 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":232,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_232_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:49.376 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 233
2025-08-03 10:30:49.376 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 233
2025-08-03 10:30:49.376 [Thd =66]  Info Default  开始扫描条带； [233/261]
2025-08-03 10:30:49.385 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:30:49.387 [Thd =70]  Info Default ***row:233, vectorBeginX:-72.016, vectorBeginY:-42.371, captureBeginX:-70.396, captureBeginY:-42.371, captureEndX:69.752, captureEndY:-42.371, vectorEndX:71.655, vectorEndY:-42.371
2025-08-03 10:30:49.387 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:49.389 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3964515862719,EndPoint:-69.7524296076054
2025-08-03 10:30:49.688 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:30:49.691 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":232,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_232_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:54.237 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:233
2025-08-03 10:30:54.237 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:233,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:54.237 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:54.239 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:233
2025-08-03 10:30:54.239 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:233,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:54.239 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:233,source_light_Type:A_SourceLightType
2025-08-03 10:30:54.239 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:233,source_light_Type:B_SourceLightType
2025-08-03 10:30:54.239 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：233,A_SourceLightType
2025-08-03 10:30:54.239 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：233,B_SourceLightType
2025-08-03 10:30:54.413 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;233/261,
2025-08-03 10:30:54.423 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:54.470 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:30:54.692 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:30:54.695 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":233,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_233_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:54.815 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 234
2025-08-03 10:30:54.815 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 234
2025-08-03 10:30:54.815 [Thd =67]  Info Default  开始扫描条带； [234/261]
2025-08-03 10:30:54.824 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:30:54.827 [Thd =70]  Info Default CaptureBeginX: 70.08987, CaptureBeginY:-42.79929, CaptureEndX:-70.05901, CaptureEndY:-42.79929, VectorBeginX:71.65476, VectorBeginY:-42.79929, VectorEndX:-72.01550, VectorEndY:-42.79929, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:30:54.827 [Thd =70]  Info Default ***row:234, vectorBeginX:71.655, vectorBeginY:-42.799, captureBeginX:70.090, captureBeginY:-42.799, captureEndX:-70.059, captureEndY:-42.799, vectorEndX:-72.015, vectorEndY:-42.799
2025-08-03 10:30:54.827 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:30:54.828 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0898707341086,EndPoint:70.0590104597687
2025-08-03 10:30:55.162 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:30:55.165 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":233,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_233_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:30:59.676 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:234
2025-08-03 10:30:59.676 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:234,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:59.676 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:30:59.677 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:234
2025-08-03 10:30:59.678 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:234,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:30:59.678 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:234,source_light_Type:A_SourceLightType
2025-08-03 10:30:59.678 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:234,source_light_Type:B_SourceLightType
2025-08-03 10:30:59.678 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：234,A_SourceLightType
2025-08-03 10:30:59.678 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：234,B_SourceLightType
2025-08-03 10:30:59.849 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;234/261,
2025-08-03 10:30:59.858 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:30:59.901 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:00.132 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:00.135 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":234,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_234_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:00.237 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 235
2025-08-03 10:31:00.237 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 235
2025-08-03 10:31:00.237 [Thd =66]  Info Default  开始扫描条带； [235/261]
2025-08-03 10:31:00.246 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:31:00.248 [Thd =70]  Info Default ***row:235, vectorBeginX:-72.015, vectorBeginY:-43.228, captureBeginX:-70.396, captureBeginY:-43.228, captureEndX:69.752, captureEndY:-43.228, vectorEndX:71.655, vectorEndY:-43.228
2025-08-03 10:31:00.248 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:00.250 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3964144949326,EndPoint:-69.7524666989447
2025-08-03 10:31:00.620 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:00.622 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":234,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_234_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:03.143 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:03
2025-08-03 10:31:03.155 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:03
2025-08-03 10:31:05.102 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:235
2025-08-03 10:31:05.102 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:235,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:05.102 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:05.104 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:235
2025-08-03 10:31:05.105 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:235,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:05.105 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:235,source_light_Type:A_SourceLightType
2025-08-03 10:31:05.105 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:235,source_light_Type:B_SourceLightType
2025-08-03 10:31:05.105 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：235,A_SourceLightType
2025-08-03 10:31:05.105 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：235,B_SourceLightType
2025-08-03 10:31:05.276 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;235/261,
2025-08-03 10:31:05.285 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:05.332 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:05.558 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:05.560 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":235,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_235_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:05.669 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 236
2025-08-03 10:31:05.669 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 236
2025-08-03 10:31:05.669 [Thd =68]  Info Default  开始扫描条带； [236/261]
2025-08-03 10:31:05.678 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:31:05.681 [Thd =70]  Info Default CaptureBeginX: 70.08991, CaptureBeginY:-43.65592, CaptureEndX:-70.05897, CaptureEndY:-43.65592, VectorBeginX:71.65480, VectorBeginY:-43.65592, VectorEndX:-72.01546, VectorEndY:-43.65592, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:31:05.681 [Thd =70]  Info Default ***row:236, vectorBeginX:71.655, vectorBeginY:-43.656, captureBeginX:70.090, captureBeginY:-43.656, captureEndX:-70.059, captureEndY:-43.656, vectorEndX:-72.015, vectorEndY:-43.656
2025-08-03 10:31:05.681 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:05.683 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0899078254479,EndPoint:70.0589733684294
2025-08-03 10:31:06.030 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:06.033 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":235,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_235_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:07.169 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:07
2025-08-03 10:31:07.187 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:07
2025-08-03 10:31:10.528 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:236
2025-08-03 10:31:10.528 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:236,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:10.528 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:10.530 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:236
2025-08-03 10:31:10.530 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:236,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:10.530 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:236,source_light_Type:A_SourceLightType
2025-08-03 10:31:10.530 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:236,source_light_Type:B_SourceLightType
2025-08-03 10:31:10.530 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：236,A_SourceLightType
2025-08-03 10:31:10.531 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：236,B_SourceLightType
2025-08-03 10:31:10.708 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;236/261,
2025-08-03 10:31:10.717 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:10.765 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:10.991 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:10.993 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":236,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_236_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:11.098 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 237
2025-08-03 10:31:11.098 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 237
2025-08-03 10:31:11.098 [Thd =65]  Info Default  开始扫描条带； [237/261]
2025-08-03 10:31:11.107 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:31:11.110 [Thd =70]  Info Default ***row:237, vectorBeginX:-72.015, vectorBeginY:-44.084, captureBeginX:-70.396, captureBeginY:-44.084, captureEndX:69.753, captureEndY:-44.084, vectorEndX:71.655, vectorEndY:-44.084
2025-08-03 10:31:11.110 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:11.111 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3963774035933,EndPoint:-69.752503790284
2025-08-03 10:31:11.463 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:11.465 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":236,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_236_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:13.707 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:13
2025-08-03 10:31:13.718 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:13
2025-08-03 10:31:15.959 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:237
2025-08-03 10:31:15.959 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:237,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:15.959 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:15.961 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:237
2025-08-03 10:31:15.961 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:237,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:15.961 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:237,source_light_Type:A_SourceLightType
2025-08-03 10:31:15.961 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:237,source_light_Type:B_SourceLightType
2025-08-03 10:31:15.961 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：237,A_SourceLightType
2025-08-03 10:31:15.961 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：237,B_SourceLightType
2025-08-03 10:31:16.131 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;237/261,
2025-08-03 10:31:16.140 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:16.187 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:16.420 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:16.422 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":237,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_237_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:16.531 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 238
2025-08-03 10:31:16.531 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 238
2025-08-03 10:31:16.531 [Thd =50]  Info Default  开始扫描条带； [238/261]
2025-08-03 10:31:16.546 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:31:16.549 [Thd =70]  Info Default CaptureBeginX: 70.08994, CaptureBeginY:-44.51254, CaptureEndX:-70.05894, CaptureEndY:-44.51254, VectorBeginX:71.65484, VectorBeginY:-44.51254, VectorEndX:-72.01543, VectorEndY:-44.51254, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:31:16.549 [Thd =70]  Info Default ***row:238, vectorBeginX:71.655, vectorBeginY:-44.513, captureBeginX:70.090, captureBeginY:-44.513, captureEndX:-70.059, captureEndY:-44.513, vectorEndX:-72.015, vectorEndY:-44.513
2025-08-03 10:31:16.549 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:16.551 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0899449167872,EndPoint:70.0589362770901
2025-08-03 10:31:16.893 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:16.895 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":237,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_237_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:18.235 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:18
2025-08-03 10:31:18.249 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:18
2025-08-03 10:31:21.396 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:238
2025-08-03 10:31:21.396 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:238,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:21.396 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:21.399 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:238
2025-08-03 10:31:21.399 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:238,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:21.399 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:238,source_light_Type:A_SourceLightType
2025-08-03 10:31:21.399 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:238,source_light_Type:B_SourceLightType
2025-08-03 10:31:21.399 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：238,A_SourceLightType
2025-08-03 10:31:21.399 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：238,B_SourceLightType
2025-08-03 10:31:21.572 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;238/261,
2025-08-03 10:31:21.582 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:21.642 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:21.857 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:21.860 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":238,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_238_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:21.982 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 239
2025-08-03 10:31:21.982 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 239
2025-08-03 10:31:21.982 [Thd =41]  Info Default  开始扫描条带； [239/261]
2025-08-03 10:31:21.991 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:31:21.994 [Thd =70]  Info Default ***row:239, vectorBeginX:-72.015, vectorBeginY:-44.941, captureBeginX:-70.396, captureBeginY:-44.941, captureEndX:69.753, captureEndY:-44.941, vectorEndX:71.655, vectorEndY:-44.941
2025-08-03 10:31:21.994 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:21.995 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.396340312254,EndPoint:-69.7525408816232
2025-08-03 10:31:22.325 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:22.327 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":238,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_238_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:23.769 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:23
2025-08-03 10:31:23.781 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:23
2025-08-03 10:31:26.842 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:239
2025-08-03 10:31:26.842 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:239,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:26.842 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:26.844 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:239
2025-08-03 10:31:26.844 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:239,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:26.844 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:239,source_light_Type:A_SourceLightType
2025-08-03 10:31:26.844 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:239,source_light_Type:B_SourceLightType
2025-08-03 10:31:26.844 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：239,A_SourceLightType
2025-08-03 10:31:26.844 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：239,B_SourceLightType
2025-08-03 10:31:27.016 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;239/261,
2025-08-03 10:31:27.025 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:27.079 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:27.292 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:27
2025-08-03 10:31:27.298 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:27.300 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":239,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_239_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:27.310 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:27
2025-08-03 10:31:27.414 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 240
2025-08-03 10:31:27.414 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 240
2025-08-03 10:31:27.414 [Thd =69]  Info Default  开始扫描条带； [240/261]
2025-08-03 10:31:27.423 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:31:27.426 [Thd =70]  Info Default CaptureBeginX: 70.08998, CaptureBeginY:-45.36917, CaptureEndX:-70.05890, CaptureEndY:-45.36917, VectorBeginX:71.65487, VectorBeginY:-45.36917, VectorEndX:-72.01539, VectorEndY:-45.36917, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:31:27.426 [Thd =70]  Info Default ***row:240, vectorBeginX:71.655, vectorBeginY:-45.369, captureBeginX:70.090, captureBeginY:-45.369, captureEndX:-70.059, captureEndY:-45.369, vectorEndX:-72.015, vectorEndY:-45.369
2025-08-03 10:31:27.426 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:27.428 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0899820081265,EndPoint:70.0588991857508
2025-08-03 10:31:27.769 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:27.771 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":239,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_239_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:32.278 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:240
2025-08-03 10:31:32.278 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:240,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:32.278 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:32.280 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:240
2025-08-03 10:31:32.280 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:240,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:32.280 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:240,source_light_Type:A_SourceLightType
2025-08-03 10:31:32.280 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:240,source_light_Type:B_SourceLightType
2025-08-03 10:31:32.280 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：240,A_SourceLightType
2025-08-03 10:31:32.280 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：240,B_SourceLightType
2025-08-03 10:31:32.457 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;240/261,
2025-08-03 10:31:32.466 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:32.508 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:32.733 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:32.735 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":240,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_240_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:32.848 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 241
2025-08-03 10:31:32.848 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 241
2025-08-03 10:31:32.848 [Thd =56]  Info Default  开始扫描条带； [241/261]
2025-08-03 10:31:32.855 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:31:32.858 [Thd =70]  Info Default ***row:241, vectorBeginX:-72.015, vectorBeginY:-45.797, captureBeginX:-70.396, captureBeginY:-45.797, captureEndX:69.753, captureEndY:-45.797, vectorEndX:71.655, vectorEndY:-45.797
2025-08-03 10:31:32.858 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:32.860 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3963032209147,EndPoint:-69.7525779729625
2025-08-03 10:31:33.204 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:33.206 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":240,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_240_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:34.389 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:34
2025-08-03 10:31:34.401 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:34
2025-08-03 10:31:37.710 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:241
2025-08-03 10:31:37.710 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:241,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:37.710 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:37.712 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:241
2025-08-03 10:31:37.712 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:241,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:37.712 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:241,source_light_Type:A_SourceLightType
2025-08-03 10:31:37.713 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:241,source_light_Type:B_SourceLightType
2025-08-03 10:31:37.713 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：241,A_SourceLightType
2025-08-03 10:31:37.713 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：241,B_SourceLightType
2025-08-03 10:31:37.879 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;241/261,
2025-08-03 10:31:37.888 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:37.943 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:38.165 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:38.167 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":241,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_241_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:38.278 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 242
2025-08-03 10:31:38.278 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 242
2025-08-03 10:31:38.278 [Thd =59]  Info Default  开始扫描条带； [242/261]
2025-08-03 10:31:38.287 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:31:38.290 [Thd =70]  Info Default CaptureBeginX: 70.09002, CaptureBeginY:-46.22580, CaptureEndX:-70.05886, CaptureEndY:-46.22580, VectorBeginX:71.65491, VectorBeginY:-46.22580, VectorEndX:-72.01535, VectorEndY:-46.22580, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:31:38.290 [Thd =70]  Info Default ***row:242, vectorBeginX:71.655, vectorBeginY:-46.226, captureBeginX:70.090, captureBeginY:-46.226, captureEndX:-70.059, captureEndY:-46.226, vectorEndX:-72.015, vectorEndY:-46.226
2025-08-03 10:31:38.290 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:38.291 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0900190994657,EndPoint:70.0588620944115
2025-08-03 10:31:38.634 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:38.637 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":241,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_241_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:39.418 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:39
2025-08-03 10:31:39.434 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:39
2025-08-03 10:31:43.136 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:242
2025-08-03 10:31:43.137 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:242,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:43.137 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:43.138 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:242
2025-08-03 10:31:43.138 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:242,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:43.138 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:242,source_light_Type:A_SourceLightType
2025-08-03 10:31:43.138 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:242,source_light_Type:B_SourceLightType
2025-08-03 10:31:43.138 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：242,A_SourceLightType
2025-08-03 10:31:43.138 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：242,B_SourceLightType
2025-08-03 10:31:43.311 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;242/261,
2025-08-03 10:31:43.320 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:43.380 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:43.593 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:43.595 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":242,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_242_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:43.717 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 243
2025-08-03 10:31:43.717 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 243
2025-08-03 10:31:43.717 [Thd =42]  Info Default  开始扫描条带； [243/261]
2025-08-03 10:31:43.726 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:31:43.728 [Thd =70]  Info Default ***row:243, vectorBeginX:-72.015, vectorBeginY:-46.654, captureBeginX:-70.396, captureBeginY:-46.654, captureEndX:69.753, captureEndY:-46.654, vectorEndX:71.655, vectorEndY:-46.654
2025-08-03 10:31:43.729 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:43.731 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3962661295754,EndPoint:-69.7526150643018
2025-08-03 10:31:43.948 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:43
2025-08-03 10:31:43.963 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:43
2025-08-03 10:31:44.063 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:44.065 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":242,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_242_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:48.578 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:243
2025-08-03 10:31:48.578 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:243,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:48.578 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:48.580 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:243
2025-08-03 10:31:48.580 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:243,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:48.580 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:243,source_light_Type:A_SourceLightType
2025-08-03 10:31:48.580 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:243,source_light_Type:B_SourceLightType
2025-08-03 10:31:48.580 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：243,A_SourceLightType
2025-08-03 10:31:48.580 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：243,B_SourceLightType
2025-08-03 10:31:48.757 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;243/261,
2025-08-03 10:31:48.767 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:48.856 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:49.034 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:49.039 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":243,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_243_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:49.194 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 244
2025-08-03 10:31:49.194 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 244
2025-08-03 10:31:49.194 [Thd =6]  Info Default  开始扫描条带； [244/261]
2025-08-03 10:31:49.203 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:31:49.206 [Thd =70]  Info Default CaptureBeginX: 70.09006, CaptureBeginY:-47.08242, CaptureEndX:-70.05883, CaptureEndY:-47.08242, VectorBeginX:71.65495, VectorBeginY:-47.08242, VectorEndX:-72.01531, VectorEndY:-47.08242, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:31:49.206 [Thd =70]  Info Default ***row:244, vectorBeginX:71.655, vectorBeginY:-47.082, captureBeginX:70.090, captureBeginY:-47.082, captureEndX:-70.059, captureEndY:-47.082, vectorEndX:-72.015, vectorEndY:-47.082
2025-08-03 10:31:49.206 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:49.209 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.090056190805,EndPoint:70.0588250030722
2025-08-03 10:31:49.507 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:49.509 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":243,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_243_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:50.028 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:50
2025-08-03 10:31:50.040 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:50
2025-08-03 10:31:54.053 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:244
2025-08-03 10:31:54.053 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:244,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:54.053 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:54.055 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:244
2025-08-03 10:31:54.056 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:244,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:54.056 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:244,source_light_Type:A_SourceLightType
2025-08-03 10:31:54.056 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:244,source_light_Type:B_SourceLightType
2025-08-03 10:31:54.056 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：244,A_SourceLightType
2025-08-03 10:31:54.056 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：244,B_SourceLightType
2025-08-03 10:31:54.228 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;244/261,
2025-08-03 10:31:54.237 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:54.289 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:54.515 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:54.518 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":244,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_244_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:54.626 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 245
2025-08-03 10:31:54.626 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 245
2025-08-03 10:31:54.626 [Thd =23]  Info Default  开始扫描条带； [245/261]
2025-08-03 10:31:54.644 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:31:54.646 [Thd =70]  Info Default ***row:245, vectorBeginX:-72.015, vectorBeginY:-47.511, captureBeginX:-70.396, captureBeginY:-47.511, captureEndX:69.753, captureEndY:-47.511, vectorEndX:71.655, vectorEndY:-47.511
2025-08-03 10:31:54.647 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:31:54.649 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3962290382361,EndPoint:-69.7526521556411
2025-08-03 10:31:54.984 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:31:54.986 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":244,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_244_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:31:56.060 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:31:56
2025-08-03 10:31:56.071 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:31:56
2025-08-03 10:31:59.497 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:245
2025-08-03 10:31:59.497 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:245,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:59.497 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:31:59.498 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:245
2025-08-03 10:31:59.498 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:245,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:31:59.498 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:245,source_light_Type:A_SourceLightType
2025-08-03 10:31:59.498 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:245,source_light_Type:B_SourceLightType
2025-08-03 10:31:59.498 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：245,A_SourceLightType
2025-08-03 10:31:59.498 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：245,B_SourceLightType
2025-08-03 10:31:59.674 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;245/261,
2025-08-03 10:31:59.684 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:31:59.751 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:31:59.953 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:31:59.955 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":245,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_245_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:00.098 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 246
2025-08-03 10:32:00.098 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 246
2025-08-03 10:32:00.098 [Thd =69]  Info Default  开始扫描条带； [246/261]
2025-08-03 10:32:00.107 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:32:00.110 [Thd =70]  Info Default CaptureBeginX: 70.09009, CaptureBeginY:-47.93905, CaptureEndX:-70.05879, CaptureEndY:-47.93905, VectorBeginX:71.65498, VectorBeginY:-47.93905, VectorEndX:-72.01528, VectorEndY:-47.93905, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:32:00.110 [Thd =70]  Info Default ***row:246, vectorBeginX:71.655, vectorBeginY:-47.939, captureBeginX:70.090, captureBeginY:-47.939, captureEndX:-70.059, captureEndY:-47.939, vectorEndX:-72.015, vectorEndY:-47.939
2025-08-03 10:32:00.110 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:00.111 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0900932821443,EndPoint:70.0587879117329
2025-08-03 10:32:00.423 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:00.425 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":245,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_245_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:01.088 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:01
2025-08-03 10:32:01.109 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:01
2025-08-03 10:32:04.959 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:246
2025-08-03 10:32:04.960 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:246,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:04.960 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:04.960 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:246
2025-08-03 10:32:04.960 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:246,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:04.960 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:246,source_light_Type:B_SourceLightType
2025-08-03 10:32:04.960 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:246,source_light_Type:A_SourceLightType
2025-08-03 10:32:04.960 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：246,B_SourceLightType
2025-08-03 10:32:04.960 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：246,A_SourceLightType
2025-08-03 10:32:05.130 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;246/261,
2025-08-03 10:32:05.139 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:05.195 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:05.421 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:05.423 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":246,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_246_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:05.530 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 247
2025-08-03 10:32:05.530 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 247
2025-08-03 10:32:05.530 [Thd =56]  Info Default  开始扫描条带； [247/261]
2025-08-03 10:32:05.539 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:32:05.542 [Thd =70]  Info Default ***row:247, vectorBeginX:-72.015, vectorBeginY:-48.367, captureBeginX:-70.396, captureBeginY:-48.367, captureEndX:69.753, captureEndY:-48.367, vectorEndX:71.655, vectorEndY:-48.367
2025-08-03 10:32:05.542 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:05.544 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3961919468968,EndPoint:-69.7526892469804
2025-08-03 10:32:05.888 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:05.890 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":246,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_246_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:07.636 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:07
2025-08-03 10:32:07.647 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:07
2025-08-03 10:32:10.391 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:247
2025-08-03 10:32:10.391 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:247,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:10.391 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:10.393 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:247
2025-08-03 10:32:10.393 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:247,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:10.393 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:247,source_light_Type:A_SourceLightType
2025-08-03 10:32:10.393 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:247,source_light_Type:B_SourceLightType
2025-08-03 10:32:10.399 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：247,A_SourceLightType
2025-08-03 10:32:10.399 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：247,B_SourceLightType
2025-08-03 10:32:10.568 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;247/261,
2025-08-03 10:32:10.577 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:10.627 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:10.854 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:10.856 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":247,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_247_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:10.973 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 248
2025-08-03 10:32:10.973 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 248
2025-08-03 10:32:10.973 [Thd =42]  Info Default  开始扫描条带； [248/261]
2025-08-03 10:32:10.982 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:32:10.984 [Thd =70]  Info Default CaptureBeginX: 70.09013, CaptureBeginY:-48.79567, CaptureEndX:-70.05875, CaptureEndY:-48.79567, VectorBeginX:71.65502, VectorBeginY:-48.79567, VectorEndX:-72.01524, VectorEndY:-48.79567, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:32:10.984 [Thd =70]  Info Default ***row:248, vectorBeginX:71.655, vectorBeginY:-48.796, captureBeginX:70.090, captureBeginY:-48.796, captureEndX:-70.059, captureEndY:-48.796, vectorEndX:-72.015, vectorEndY:-48.796
2025-08-03 10:32:10.984 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:10.986 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0901303734836,EndPoint:70.0587508203936
2025-08-03 10:32:11.159 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:11
2025-08-03 10:32:11.171 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:11
2025-08-03 10:32:11.321 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:11.323 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":247,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_247_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:15.829 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:248
2025-08-03 10:32:15.830 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:248,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:15.830 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:15.832 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:248
2025-08-03 10:32:15.832 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:248,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:15.832 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:248,source_light_Type:A_SourceLightType
2025-08-03 10:32:15.832 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:248,source_light_Type:B_SourceLightType
2025-08-03 10:32:15.832 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：248,A_SourceLightType
2025-08-03 10:32:15.833 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：248,B_SourceLightType
2025-08-03 10:32:16.005 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;248/261,
2025-08-03 10:32:16.014 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:16.063 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:16.286 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:16.297 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":248,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_248_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:16.401 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 249
2025-08-03 10:32:16.401 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 249
2025-08-03 10:32:16.401 [Thd =44]  Info Default  开始扫描条带； [249/261]
2025-08-03 10:32:16.416 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:32:16.418 [Thd =70]  Info Default ***row:249, vectorBeginX:-72.015, vectorBeginY:-49.224, captureBeginX:-70.396, captureBeginY:-49.224, captureEndX:69.753, captureEndY:-49.224, vectorEndX:71.655, vectorEndY:-49.224
2025-08-03 10:32:16.419 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:16.421 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3961548555575,EndPoint:-69.7527263383197
2025-08-03 10:32:16.761 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:16.763 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":248,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_248_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:18.199 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:18
2025-08-03 10:32:18.215 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:18
2025-08-03 10:32:21.274 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:249
2025-08-03 10:32:21.274 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:249,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:21.274 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:21.275 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:249
2025-08-03 10:32:21.275 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:249,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:21.275 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:249,source_light_Type:A_SourceLightType
2025-08-03 10:32:21.275 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：249,A_SourceLightType
2025-08-03 10:32:21.275 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：249,B_SourceLightType
2025-08-03 10:32:21.275 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:249,source_light_Type:B_SourceLightType
2025-08-03 10:32:21.445 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;249/261,
2025-08-03 10:32:21.454 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:21.507 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:21.730 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:21.732 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":249,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_249_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:21.852 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 250
2025-08-03 10:32:21.852 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 250
2025-08-03 10:32:21.852 [Thd =42]  Info Default  开始扫描条带； [250/261]
2025-08-03 10:32:21.861 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:32:21.864 [Thd =70]  Info Default CaptureBeginX: 70.09017, CaptureBeginY:-49.65230, CaptureEndX:-70.05871, CaptureEndY:-49.65230, VectorBeginX:71.65506, VectorBeginY:-49.65230, VectorEndX:-72.01520, VectorEndY:-49.65230, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:32:21.864 [Thd =70]  Info Default ***row:250, vectorBeginX:71.655, vectorBeginY:-49.652, captureBeginX:70.090, captureBeginY:-49.652, captureEndX:-70.059, captureEndY:-49.652, vectorEndX:-72.015, vectorEndY:-49.652
2025-08-03 10:32:21.864 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:21.866 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0901674648229,EndPoint:70.0587137290543
2025-08-03 10:32:22.221 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:22.223 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":249,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_249_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:22.730 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:22
2025-08-03 10:32:22.755 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:22
2025-08-03 10:32:26.712 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:250
2025-08-03 10:32:26.712 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:250,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:26.712 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:26.714 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:250
2025-08-03 10:32:26.714 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:250,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:26.714 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:250,source_light_Type:A_SourceLightType
2025-08-03 10:32:26.714 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:250,source_light_Type:B_SourceLightType
2025-08-03 10:32:26.714 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：250,A_SourceLightType
2025-08-03 10:32:26.718 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：250,B_SourceLightType
2025-08-03 10:32:26.891 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;250/261,
2025-08-03 10:32:26.900 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:26.956 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:27.169 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:27.171 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":250,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_250_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:27.293 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 251
2025-08-03 10:32:27.293 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 251
2025-08-03 10:32:27.293 [Thd =42]  Info Default  开始扫描条带； [251/261]
2025-08-03 10:32:27.311 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:32:27.314 [Thd =70]  Info Default ***row:251, vectorBeginX:-72.015, vectorBeginY:-50.081, captureBeginX:-70.396, captureBeginY:-50.081, captureEndX:69.753, captureEndY:-50.081, vectorEndX:71.655, vectorEndY:-50.081
2025-08-03 10:32:27.314 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:27.315 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3961177642182,EndPoint:-69.752763429659
2025-08-03 10:32:27.635 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:27.638 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":250,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_250_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:28.775 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:28
2025-08-03 10:32:28.790 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:28
2025-08-03 10:32:31.799 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:31
2025-08-03 10:32:31.822 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:31
2025-08-03 10:32:32.162 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:251
2025-08-03 10:32:32.162 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:251,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:32.162 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:32.164 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:251
2025-08-03 10:32:32.164 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:251,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:32.164 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:251,source_light_Type:A_SourceLightType
2025-08-03 10:32:32.164 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:251,source_light_Type:B_SourceLightType
2025-08-03 10:32:32.164 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：251,A_SourceLightType
2025-08-03 10:32:32.164 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：251,B_SourceLightType
2025-08-03 10:32:32.339 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;251/261,
2025-08-03 10:32:32.348 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:32.407 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:32.619 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:32.621 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":251,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_251_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:32.754 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 252
2025-08-03 10:32:32.754 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 252
2025-08-03 10:32:32.754 [Thd =6]  Info Default  开始扫描条带； [252/261]
2025-08-03 10:32:32.763 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:32:32.766 [Thd =70]  Info Default CaptureBeginX: 70.09020, CaptureBeginY:-50.50892, CaptureEndX:-70.05868, CaptureEndY:-50.50892, VectorBeginX:71.65509, VectorBeginY:-50.50892, VectorEndX:-72.01517, VectorEndY:-50.50892, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:32:32.766 [Thd =70]  Info Default ***row:252, vectorBeginX:71.655, vectorBeginY:-50.509, captureBeginX:70.090, captureBeginY:-50.509, captureEndX:-70.059, captureEndY:-50.509, vectorEndX:-72.015, vectorEndY:-50.509
2025-08-03 10:32:32.766 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:32.768 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0902045561622,EndPoint:70.058676637715
2025-08-03 10:32:33.086 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:33.092 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":251,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_251_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:37.614 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:252
2025-08-03 10:32:37.615 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:252,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:37.615 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:37.615 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:252
2025-08-03 10:32:37.615 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:252,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:37.616 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:252,source_light_Type:A_SourceLightType
2025-08-03 10:32:37.616 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:252,source_light_Type:B_SourceLightType
2025-08-03 10:32:37.616 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：252,A_SourceLightType
2025-08-03 10:32:37.616 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：252,B_SourceLightType
2025-08-03 10:32:37.793 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;252/261,
2025-08-03 10:32:37.804 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:37.851 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:38.072 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:38.074 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":252,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_252_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:38.185 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 253
2025-08-03 10:32:38.185 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 253
2025-08-03 10:32:38.185 [Thd =66]  Info Default  开始扫描条带； [253/261]
2025-08-03 10:32:38.194 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:32:38.197 [Thd =70]  Info Default ***row:253, vectorBeginX:-72.015, vectorBeginY:-50.937, captureBeginX:-70.396, captureBeginY:-50.937, captureEndX:69.753, captureEndY:-50.937, vectorEndX:71.655, vectorEndY:-50.937
2025-08-03 10:32:38.197 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:38.199 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3960806728789,EndPoint:-69.7528005209983
2025-08-03 10:32:38.560 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:38.562 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":252,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_252_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:38.843 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:38
2025-08-03 10:32:38.855 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:38
2025-08-03 10:32:43.051 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:253
2025-08-03 10:32:43.051 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:253,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:43.051 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:43.053 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:253
2025-08-03 10:32:43.053 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:253,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:43.054 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:253,source_light_Type:A_SourceLightType
2025-08-03 10:32:43.054 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:253,source_light_Type:B_SourceLightType
2025-08-03 10:32:43.054 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：253,A_SourceLightType
2025-08-03 10:32:43.054 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：253,B_SourceLightType
2025-08-03 10:32:43.227 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;253/261,
2025-08-03 10:32:43.236 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:43.285 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:43.509 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:43.511 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":253,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_253_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:43.624 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 254
2025-08-03 10:32:43.624 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 254
2025-08-03 10:32:43.624 [Thd =67]  Info Default  开始扫描条带； [254/261]
2025-08-03 10:32:43.633 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:32:43.636 [Thd =70]  Info Default CaptureBeginX: 70.09024, CaptureBeginY:-51.36555, CaptureEndX:-70.05864, CaptureEndY:-51.36555, VectorBeginX:71.65513, VectorBeginY:-51.36555, VectorEndX:-72.01513, VectorEndY:-51.36555, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:32:43.636 [Thd =70]  Info Default ***row:254, vectorBeginX:71.655, vectorBeginY:-51.366, captureBeginX:70.090, captureBeginY:-51.366, captureEndX:-70.059, captureEndY:-51.366, vectorEndX:-72.015, vectorEndY:-51.366
2025-08-03 10:32:43.636 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:43.637 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0902416475015,EndPoint:70.0586395463757
2025-08-03 10:32:43.872 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:43
2025-08-03 10:32:43.887 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:43
2025-08-03 10:32:43.978 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:43.980 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":253,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_253_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:48.401 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:48
2025-08-03 10:32:48.413 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:48
2025-08-03 10:32:48.483 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:254
2025-08-03 10:32:48.483 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:254,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:48.483 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:48.485 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:254
2025-08-03 10:32:48.485 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:254,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:48.485 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:254,source_light_Type:A_SourceLightType
2025-08-03 10:32:48.485 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:254,source_light_Type:B_SourceLightType
2025-08-03 10:32:48.485 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：254,A_SourceLightType
2025-08-03 10:32:48.486 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：254,B_SourceLightType
2025-08-03 10:32:48.665 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;254/261,
2025-08-03 10:32:48.674 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:48.779 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:48.940 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:48.942 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":254,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_254_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:49.126 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 255
2025-08-03 10:32:49.126 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 255
2025-08-03 10:32:49.126 [Thd =69]  Info Default  开始扫描条带； [255/261]
2025-08-03 10:32:49.141 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:32:49.143 [Thd =70]  Info Default ***row:255, vectorBeginX:-72.015, vectorBeginY:-51.794, captureBeginX:-70.396, captureBeginY:-51.794, captureEndX:69.753, captureEndY:-51.794, vectorEndX:71.655, vectorEndY:-51.794
2025-08-03 10:32:49.143 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:49.145 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3960435815396,EndPoint:-69.7528376123376
2025-08-03 10:32:49.403 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:49.405 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":254,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_254_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:53.430 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:32:53
2025-08-03 10:32:53.457 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:32:53
2025-08-03 10:32:53.992 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:255
2025-08-03 10:32:53.993 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:255,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:53.993 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:53.995 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:255
2025-08-03 10:32:53.995 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:255,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:53.995 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:255,source_light_Type:A_SourceLightType
2025-08-03 10:32:53.995 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:255,source_light_Type:B_SourceLightType
2025-08-03 10:32:53.995 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：255,A_SourceLightType
2025-08-03 10:32:53.996 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：255,B_SourceLightType
2025-08-03 10:32:54.169 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;255/261,
2025-08-03 10:32:54.178 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:54.225 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:54.449 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:54.451 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":255,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_255_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:54.563 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 256
2025-08-03 10:32:54.563 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 256
2025-08-03 10:32:54.563 [Thd =59]  Info Default  开始扫描条带； [256/261]
2025-08-03 10:32:54.581 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:32:54.584 [Thd =70]  Info Default CaptureBeginX: 70.09028, CaptureBeginY:-52.22217, CaptureEndX:-70.05860, CaptureEndY:-52.22217, VectorBeginX:71.65517, VectorBeginY:-52.22217, VectorEndX:-72.01509, VectorEndY:-52.22217, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:32:54.584 [Thd =70]  Info Default ***row:256, vectorBeginX:71.655, vectorBeginY:-52.222, captureBeginX:70.090, captureBeginY:-52.222, captureEndX:-70.059, captureEndY:-52.222, vectorEndX:-72.015, vectorEndY:-52.222
2025-08-03 10:32:54.584 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:32:54.585 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0902787388408,EndPoint:70.0586024550364
2025-08-03 10:32:54.918 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:32:54.920 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":255,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_255_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:32:59.434 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:256
2025-08-03 10:32:59.434 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:256,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:59.434 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:32:59.435 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:256
2025-08-03 10:32:59.435 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:256,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:32:59.435 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:256,source_light_Type:A_SourceLightType
2025-08-03 10:32:59.435 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:256,source_light_Type:B_SourceLightType
2025-08-03 10:32:59.435 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：256,A_SourceLightType
2025-08-03 10:32:59.436 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：256,B_SourceLightType
2025-08-03 10:32:59.610 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;256/261,
2025-08-03 10:32:59.619 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:32:59.675 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:32:59.894 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:32:59.896 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":256,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_256_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:00.021 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 257
2025-08-03 10:33:00.021 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 257
2025-08-03 10:33:00.021 [Thd =69]  Info Default  开始扫描条带； [257/261]
2025-08-03 10:33:00.038 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:33:00.041 [Thd =70]  Info Default ***row:257, vectorBeginX:-72.015, vectorBeginY:-52.650, captureBeginX:-70.396, captureBeginY:-52.650, captureEndX:69.753, captureEndY:-52.650, vectorEndX:71.655, vectorEndY:-52.650
2025-08-03 10:33:00.041 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:33:00.042 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.3960064902003,EndPoint:-69.7528747036769
2025-08-03 10:33:00.370 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:33:00.372 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":256,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_256_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:00.982 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:00
2025-08-03 10:33:00.994 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:00
2025-08-03 10:33:04.892 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:257
2025-08-03 10:33:04.892 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:257,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:04.892 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:33:04.894 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:257
2025-08-03 10:33:04.894 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:257,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:04.894 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:257,source_light_Type:A_SourceLightType
2025-08-03 10:33:04.894 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:257,source_light_Type:B_SourceLightType
2025-08-03 10:33:04.894 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：257,A_SourceLightType
2025-08-03 10:33:04.894 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：257,B_SourceLightType
2025-08-03 10:33:05.063 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;257/261,
2025-08-03 10:33:05.072 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:33:05.110 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:33:05.356 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:33:05.358 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":257,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_257_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:05.445 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 258
2025-08-03 10:33:05.445 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 258
2025-08-03 10:33:05.445 [Thd =67]  Info Default  开始扫描条带； [258/261]
2025-08-03 10:33:05.454 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:33:05.457 [Thd =70]  Info Default CaptureBeginX: 70.09032, CaptureBeginY:-53.07880, CaptureEndX:-70.05857, CaptureEndY:-53.07880, VectorBeginX:71.65521, VectorBeginY:-53.07880, VectorEndX:-72.01505, VectorEndY:-53.07880, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:33:05.457 [Thd =70]  Info Default ***row:258, vectorBeginX:71.655, vectorBeginY:-53.079, captureBeginX:70.090, captureBeginY:-53.079, captureEndX:-70.059, captureEndY:-53.079, vectorEndX:-72.015, vectorEndY:-53.079
2025-08-03 10:33:05.457 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:33:05.459 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0903158301801,EndPoint:70.0585653636971
2025-08-03 10:33:05.510 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:05
2025-08-03 10:33:05.530 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:05
2025-08-03 10:33:05.828 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:33:05.837 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":257,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_257_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:10.045 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:10
2025-08-03 10:33:10.066 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:10
2025-08-03 10:33:10.305 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:258
2025-08-03 10:33:10.305 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:258,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:10.305 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:33:10.306 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:258
2025-08-03 10:33:10.307 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:258,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:10.307 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:258,source_light_Type:A_SourceLightType
2025-08-03 10:33:10.307 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:258,source_light_Type:B_SourceLightType
2025-08-03 10:33:10.307 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：258,A_SourceLightType
2025-08-03 10:33:10.307 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：258,B_SourceLightType
2025-08-03 10:33:10.487 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;258/261,
2025-08-03 10:33:10.496 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:33:10.535 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:33:10.762 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:33:10.764 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":258,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_258_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:10.882 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 259
2025-08-03 10:33:10.882 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 259
2025-08-03 10:33:10.882 [Thd =66]  Info Default  开始扫描条带； [259/261]
2025-08-03 10:33:10.893 [Thd =70]  Info Default ScanDirection is Negative
2025-08-03 10:33:10.895 [Thd =70]  Info Default ***row:259, vectorBeginX:-72.015, vectorBeginY:-53.507, captureBeginX:-70.396, captureBeginY:-53.507, captureEndX:69.753, captureEndY:-53.507, vectorEndX:71.655, vectorEndY:-53.507
2025-08-03 10:33:10.896 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:33:10.897 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212455979184874,BeginPoint:70.395969398861,EndPoint:-69.7529117950162
2025-08-03 10:33:11.231 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:33:11.234 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":258,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_258_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:15.584 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:15
2025-08-03 10:33:15.604 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:15
2025-08-03 10:33:15.744 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:259
2025-08-03 10:33:15.745 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:259,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:15.745 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:33:15.746 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:259
2025-08-03 10:33:15.746 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:259,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:15.746 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:259,source_light_Type:A_SourceLightType
2025-08-03 10:33:15.747 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:259,source_light_Type:B_SourceLightType
2025-08-03 10:33:15.747 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：259,A_SourceLightType
2025-08-03 10:33:15.747 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：259,B_SourceLightType
2025-08-03 10:33:15.922 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;259/261,
2025-08-03 10:33:15.932 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:33:15.967 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:33:16.200 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:33:16.203 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":259,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_259_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:16.304 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 260
2025-08-03 10:33:16.304 [Thd =70]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 260
2025-08-03 10:33:16.304 [Thd =42]  Info Default  开始扫描条带； [260/261]
2025-08-03 10:33:16.313 [Thd =70]  Info Default ScanDirection is Positive
2025-08-03 10:33:16.315 [Thd =70]  Info Default CaptureBeginX: 70.09035, CaptureBeginY:-53.93542, CaptureEndX:-70.05853, CaptureEndY:-53.93542, VectorBeginX:71.65524, VectorBeginY:-53.93542, VectorEndX:-72.01502, VectorEndY:-53.93542, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:33:16.316 [Thd =70]  Info Default ***row:260, vectorBeginX:71.655, vectorBeginY:-53.935, captureBeginX:70.090, captureBeginY:-53.935, captureEndX:-70.059, captureEndY:-53.935, vectorEndX:-72.015, vectorEndY:-53.935
2025-08-03 10:33:16.316 [Thd =70]  Info Default m_focusMapMode：0
2025-08-03 10:33:16.317 [Thd =70]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212455979184874,BeginPoint:-70.0903529215194,EndPoint:70.0585282723578
2025-08-03 10:33:16.671 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:33:16.673 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":259,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_259_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:21.162 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:260
2025-08-03 10:33:21.162 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:260,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:21.162 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:33:21.165 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:260
2025-08-03 10:33:21.165 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:260,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:33:21.165 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:260,source_light_Type:A_SourceLightType
2025-08-03 10:33:21.165 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:260,source_light_Type:B_SourceLightType
2025-08-03 10:33:21.165 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：260,A_SourceLightType
2025-08-03 10:33:21.166 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：260,B_SourceLightType
2025-08-03 10:33:21.337 [Thd =70]  Info Default Strip scanning complete, waiting for collection... ;260/261,
2025-08-03 10:33:21.346 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:33:21.407 [Thd =70]  Info Default singleAixsScan Testing 2
2025-08-03 10:33:21.626 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:33:21.629 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":260,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_260_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:21.742 [Thd =70]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 261
2025-08-03 10:33:21.742 [Thd =70]  Info Default begin--m_TaskFinish_event----------
2025-08-03 10:33:21.742 [Thd =69]  Info Default 扫描完成,等待结果处理...
2025-08-03 10:33:22.082 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:33:22.084 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":260,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":321,"count_pack":1325,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_260_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:33:22.628 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:22
2025-08-03 10:33:22.640 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:22
2025-08-03 10:33:22.743 [Thd =70]  Info Default end--m_TaskFinish_event----------
2025-08-03 10:33:23.765 [Thd =70]  Info Default ***********Task finished.**************
2025-08-03 10:33:23.766 [Thd =70]  Info Default Stop the detection thread;
2025-08-03 10:33:23.827 [Thd =50]  Warn Default 还原光源最大功率
2025-08-03 10:33:23.827 [Thd =23]  Info Default LaserLamp MaxPower:300
2025-08-03 10:33:24.767 [Thd =56]  Info MMSFocus _isStop = true 
2025-08-03 10:33:24.828 [Thd =23]  Info Default OpenLamp Transmission
2025-08-03 10:33:25.632 [Thd =66]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:33:25.832 [Thd =23]  Info Default CloseLamp Reflection
2025-08-03 10:33:26.846 [Thd =41]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:33:27.793 [Thd =56]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:33:27.793 [Thd =59]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:33:28.336 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:28
2025-08-03 10:33:28.347 [Thd =41]  Error Default SyncSend recv cmd timeout
2025-08-03 10:33:28.350 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:28
2025-08-03 10:33:29.795 [Thd =56]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:33:29.795 [Thd =41]  Info Default 聚焦Track已关闭
2025-08-03 10:33:32.866 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:32
2025-08-03 10:33:32.885 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:32
2025-08-03 10:33:33.387 [Thd =71]  Info Default RecordCompleteStripNo begin:2025-08-03 10:33:33
2025-08-03 10:33:33.398 [Thd =71]  Info Default RecordCompleteStripNo end:2025-08-03 10:33:33
2025-08-03 10:33:33.399 [Thd =50]  Info Default 等待硬件处理中...
2025-08-03 10:33:35.839 [Thd =6]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:33:35.839 [Thd =6]  Error Default InitializeService: : ChangeLightPath to Area error
2025-08-03 10:33:35.839 [Thd =70]  Info Default Finally Over！
2025-08-03 10:33:35.839 [Thd =70]  Info Default AutoWorkerHelpe:AutoInspecting:Scanning thread is over!
2025-08-03 10:33:35.839 [Thd =67]  Info Default 硬件处理完成。
2025-08-03 10:33:35.839 [Thd =71]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Finished
2025-08-03 10:33:35.839 [Thd =71]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Finished
2025-08-03 10:33:35.841 [Thd =71]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 10:33:35.841 [Thd =71]  Info Default SetSystemStatus Success
2025-08-03 10:33:35.842 [Thd =41]  Info Default 结果处理全部完成！
2025-08-03 10:33:35.842 [Thd =59]  Info Default Chuck vacuum close
2025-08-03 10:33:36.843 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 10:33:36.843 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished! CurTaskName:2954
2025-08-03 10:33:37.657 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:33:37.912 [Thd =71]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-08-03 10:33:37.912 [Thd =71]  Info Default *********Reset2**********
2025-08-03 10:33:37.912 [Thd =6]  Info Default 检测完成！
2025-08-03 10:33:37.912 [Thd =69]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 10:33:37.926 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Finished End! CurTaskName:2954
2025-08-03 10:33:41.746 [Thd =65]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430181,"ServiceStartTime":"2025\/8\/3 10:06:32","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:41.747 [Thd =56]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430181,"ServiceStartTime":"2025\/8\/3 10:06:31","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:41.747 [Thd =67]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430181,"ServiceStartTime":"2025\/8\/3 10:06:31","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:43.248 [Thd =67]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430182,"ServiceStartTime":"2025\/8\/3 10:07:27","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":30,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:43.715 [Thd =59]  Error Default EFEM is ready
2025-08-03 10:33:43.716 [Thd =68]  Info Default EFEM is ready
2025-08-03 10:33:44.271 [Thd =6]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430186,"ServiceStartTime":"2025\/8\/3 10:33:41","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:44.273 [Thd =65]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430186,"ServiceStartTime":"2025\/8\/3 10:33:40","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:44.276 [Thd =67]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430186,"ServiceStartTime":"2025\/8\/3 10:33:40","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:45.791 [Thd =6]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430187,"ServiceStartTime":"2025\/8\/3 10:34:38","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:33:45.938 [Thd =69]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 10:36:33.113 [Thd =65]  Error Default EFEM is ready
2025-08-03 10:36:33.113 [Thd =50]  Info Default EFEM is ready
2025-08-03 10:37:08.382 [Thd =68]  Error Default EFEM is ready
2025-08-03 10:37:08.383 [Thd =65]  Info Default EFEM is ready
2025-08-03 10:38:04.656 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.Views.UCSetupMainMethodName:SelectProductSetup After Memory usage:3782.164MB VirtualMemorySize:139.5 GB
2025-08-03 10:38:04.949 [Thd =1]  Error Default SetProductSetup start
2025-08-03 10:38:04.978 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:38:04.978 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:38:07.472 [Thd =69]  Info MMSFocus _isStop = true 
2025-08-03 10:38:07.515 [Thd =69]  Info Default IKAP  Start of stream
2025-08-03 10:38:07.515 [Thd =69]  Info Default Preview Camera StartSnap
2025-08-03 10:38:07.554 [Thd =69]  Info Default IKAP End of stream
2025-08-03 10:38:07.554 [Thd =69]  Info Default Preview Camera StopSnap
2025-08-03 10:38:07.596 [Thd =69]  Info Default IKAP  Start of stream
2025-08-03 10:38:07.597 [Thd =69]  Info Default Preview Camera StartSnap
2025-08-03 10:38:07.601 [Thd =69]  Info Default camera_line StartTrigger
2025-08-03 10:38:08.931 [Thd =69]  Info Default m_focusMapMode：0
2025-08-03 10:38:08.933 [Thd =69]  Info Default Axis Y:5,PulseWidth:0.002,TriggerDistance:0.082975679542,BeginPoint:-175,EndPoint:0
2025-08-03 10:38:19.156 [Thd =69]  Info Default IKAP End of stream
2025-08-03 10:38:19.156 [Thd =69]  Info Default Preview Camera StopSnap
2025-08-03 10:38:19.858 [Thd =69]  Info Default RefLamp Rise: True!
2025-08-03 10:38:24.478 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:38:24.478 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:38:28.324 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:38:28.324 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:38:34.957 [Thd =6]  Info Default Chuck vacuum close
2025-08-03 10:38:35.957 [Thd =69]  Info Default ChuckVac: :False
2025-08-03 10:38:42.543 [Thd =1]  Info Default GetMarkPos  offsetX:857,offsety:445
2025-08-03 10:38:46.694 [Thd =1]  Info Default GetMarkPos  offsetX:612,offsety:512
2025-08-03 10:38:49.153 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:38:49.154 [Thd =59]  Info Default Chuck vacuum close
2025-08-03 10:38:50.155 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 10:38:59.530 [Thd =68]  Info Default Chuck vacuum close
2025-08-03 10:39:00.530 [Thd =23]  Info Default ChuckVac: :False
2025-08-03 10:39:04.006 [Thd =1]  Info Default GetMarkPos  offsetX:1004,offsety:444
2025-08-03 10:39:06.522 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:39:06.522 [Thd =69]  Info Default Chuck vacuum close
2025-08-03 10:39:07.523 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 10:39:17.534 [Thd =23]  Info Default Chuck vacuum close
2025-08-03 10:39:18.535 [Thd =65]  Info Default ChuckVac: :False
2025-08-03 10:39:21.631 [Thd =1]  Info Default GetMarkPos  offsetX:1003,offsety:277
2025-08-03 10:39:24.017 [Thd =1]  Info Default CaptureCmd,CanExec:True
2025-08-03 10:39:24.018 [Thd =50]  Info Default Chuck vacuum close
2025-08-03 10:39:25.020 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 10:39:30.963 [Thd =6]  Info Default Alignment ...
2025-08-03 10:39:31.084 [Thd =50]  Info Default Chuck vacuum close
2025-08-03 10:39:32.086 [Thd =41]  Info Default ChuckVac: :False
2025-08-03 10:39:41.754 [Thd =6]  Info Default Switch light...
2025-08-03 10:39:41.754 [Thd =41]  Info Default OpenLamp Transmission
2025-08-03 10:39:42.558 [Thd =68]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:39:45.369 [Thd =41]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:39:45.869 [Thd =41]  Info Default CloseLamp Reflection
2025-08-03 10:39:47.973 [Thd =41]  Info MMSFocus _isStop = true 
2025-08-03 10:39:47.974 [Thd =68]  Info Default Execute alignment 1/2
2025-08-03 10:39:53.101 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9997119,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:39:53.101 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 10:39:53.101 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 10:39:53.225 [Thd =41]  Info Default Flag:Fine1, Position:62.19355685268,73.1651462402
2025-08-03 10:40:02.921 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9999198,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:40:02.921 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 10:40:02.921 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 10:40:03.044 [Thd =41]  Info Default Flag:Fine2, Position:-62.20633059728,72.93162938432
2025-08-03 10:40:11.229 [Thd =68]  Info Default Execute alignment 2/2
2025-08-03 10:40:20.525 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.997853,xOffSet:588,yOffSet:517,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:40:20.525 [Thd =41]  Info Default D2DMatchMark ******** :errorX:-24,errorY:5
2025-08-03 10:40:22.165 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9982833,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:40:22.165 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 10:40:22.288 [Thd =41]  Info Default Flag:Fine1, Position:62.065292126552,72.7921257436427
2025-08-03 10:40:31.984 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9976484,xOffSet:600,yOffSet:517,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:40:31.985 [Thd =41]  Info Default D2DMatchMark ******** :errorX:-12,errorY:5
2025-08-03 10:40:33.619 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9976415,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:40:33.620 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 10:40:33.743 [Thd =41]  Info Default Flag:Fine2, Position:-62.3348144959292,72.7886275545809
2025-08-03 10:40:36.642 [Thd =58]  Info Default Checking Mark ...
2025-08-03 10:40:45.939 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9983644,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:40:45.939 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0
2025-08-03 10:40:45.939 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 10:40:46.061 [Thd =41]  Info Default Flag:Fine1, Position:62.0633872787678,72.7864312485445
2025-08-03 10:40:55.752 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.998318,xOffSet:611,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:40:55.752 [Thd =41]  Info Default D2DMatchMark ******** :errorX:-1,errorY:0
2025-08-03 10:40:55.752 [Thd =41]  Info Default D2DMatchMark ******** :errorX:-1,errorY:0,Successed:True
2025-08-03 10:40:55.876 [Thd =41]  Info Default Flag:Fine2, Position:-62.3367193928987,72.7864312485459
2025-08-03 10:41:06.256 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9966661,xOffSet:612,yOffSet:492,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:41:06.256 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:-20
2025-08-03 10:41:07.902 [Thd =41]  Info Default D2DSearchMark matchResult:0， score:0.9981586,xOffSet:612,yOffSet:512,AcceptScore:0.7,org_Width:1224,org_height:1024
2025-08-03 10:41:07.902 [Thd =41]  Info Default D2DMatchMark ******** :errorX:0,errorY:0,Successed:True
2025-08-03 10:41:08.025 [Thd =41]  Info Default Flag:Fine3, Position:-62.3308883920987,-68.6137492014142
2025-08-03 10:41:09.026 [Thd =41]  Info Default IsAlignAngleOK fine1:62.0633872787678,72.7864312485445,fine2:-62.3367193928987,72.7864312485459
2025-08-03 10:41:09.026 [Thd =65]  Info Default Height difference : 0.30 um 
2025-08-03 10:41:09.026 [Thd =41]  Info Default IsAlignAngleOK delta:-4.72801481136684E-12.
2025-08-03 10:41:27.086 [Thd =41]  Info MMSFocus _isStop = true 
2025-08-03 10:41:27.087 [Thd =56]  Info Default Alignment finish 
2025-08-03 10:41:27.087 [Thd =67]  Info Default Chuck vacuum open
2025-08-03 10:41:28.087 [Thd =41]  Info Default ChuckVac: :True
2025-08-03 10:41:29.009 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:41:47.457 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 10:41:47.973 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 10:41:49.482 [Thd =1]  Error Default  CheckDPTaskState 检查数据准备数据问题！！ jobName:
2025-08-03 10:41:52.754 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:41:53.076 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:41:53.087 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:41:53.087 [Thd =1]  Info Default MaskScaleY:0.999999142511454
2025-08-03 10:41:53.087 [Thd =1]  Info Default MaskScaleX:0.999998723835009,Orth_Y_BeforR:0.141764346498991
2025-08-03 10:41:53.088 [Thd =69]  Info Default located_pos:(62.0633872787678, 72.7864312485445)
2025-08-03 10:41:53.088 [Thd =69]  Info Default deltax_stage 0, deltay_stage:-124.400106671667.
2025-08-03 10:41:53.088 [Thd =69]  Info Default MoveStageForMarkCol102 point (-62.3367193928987, 72.7864312485445), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:41:53.088 [Thd =69]  Info Default located_pos:(-62.3367193928987, 72.7864312485445)
2025-08-03 10:41:53.088 [Thd =69]  Info Default deltax_stage 141.40018044996, deltay_stage:0.
2025-08-03 10:41:53.088 [Thd =69]  Info Default MoveStageForMarkCol101 point (62.0692182795728, -68.6137493216437), GDS ref(5500000, 138400000), gdsObject(146900000, 138400000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:41:53.089 [Thd =69]  Info Default deltax_stage 0, deltay_stage:-124.400106671667.
2025-08-03 10:41:53.089 [Thd =69]  Info Default MoveStageForMarkCol102 point (-62.3308883920938, -68.6137493216437), GDS ref(146900000, 138400000), gdsObject(146900000, 14000000), stageRef(62.0692182795728, -68.6137493216437).
2025-08-03 10:41:53.089 [Thd =69]  Info Default located_pos:(-62.3308883920938, -68.6137493216437)
2025-08-03 10:41:53.089 [Thd =69]  Info Default AliPt:(62.0633872787678, 72.7864312485445), GDS2StagePt:(62.0633872787678, 72.7864312485445), XOffset:5, YOffset:5
2025-08-03 10:41:53.089 [Thd =69]  Info Default AliPt:(-62.3367193928987, 72.7864312485459), GDS2StagePt:(-62.3367193928987, 72.7864312485445), XOffset:5, YOffset:5
2025-08-03 10:41:53.089 [Thd =69]  Info Default AliPt:(-62.3308883920987, -68.6137492014142), GDS2StagePt:(-62.3308883920938, -68.6137493216437), XOffset:5, YOffset:5
2025-08-03 10:41:53.098 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:41:53.098 [Thd =1]  Info Default MaskScaleY:0.999999142511454
2025-08-03 10:41:53.098 [Thd =1]  Info Default MaskScaleX:0.999998723835009,Orth_Y_BeforR:0.141764346498991
2025-08-03 10:41:53.098 [Thd =1]  Info Default deltax_stage 13.8446836681006, deltay_stage:0.
2025-08-03 10:41:53.099 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0639581999743, 58.9417475686722), GDS ref(5500000, 138400000), gdsObject(19344666, 138400000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:41:53.099 [Thd =1]  Info Default deltax_stage 0, deltay_stage:8.42519922451183.
2025-08-03 10:41:53.099 [Thd =1]  Info Default MoveStageForMarkCol102 point (70.4891574244861, 58.9417475686722), GDS ref(19344666, 138400000), gdsObject(19344666, 146825192), stageRef(62.0639581999743, 58.9417475686722).
2025-08-03 10:41:53.099 [Thd =1]  Info Default located_pos:(70.4891574244861, 58.9417475686722)
2025-08-03 10:41:53.099 [Thd =1]  Info Default deltax_stage 127.53492775561, deltay_stage:0.
2025-08-03 10:41:53.099 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0686465101496, -54.7484966155044), GDS ref(5500000, 138400000), gdsObject(133034765, 138400000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:41:53.099 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-132.804520878355.
2025-08-03 10:41:53.099 [Thd =1]  Info Default MoveStageForMarkCol102 point (-70.7358743682059, -54.7484966155044), GDS ref(133034765, 138400000), gdsObject(133034765, 5595593), stageRef(62.0686465101496, -54.7484966155044).
2025-08-03 10:41:53.099 [Thd =1]  Info Default located_pos:(-70.7358743682059, -54.7484966155044)
2025-08-03 10:41:55.235 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:41:55.427 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:42:24.813 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:btnExecute_Click Before Memory usage:4820.906MB VirtualMemorySize:140.4 GB
2025-08-03 10:42:24.938 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:42:24.938 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:42:24.984 [Thd =67]  Info Default 设置光标定环境中，请等待......
2025-08-03 10:42:24.985 [Thd =56]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 10:42:24.985 [Thd =56]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:24.986 [Thd =56]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:24.989 [Thd =56]  Info Default SetDistortionPara disaabled
2025-08-03 10:42:25.058 [Thd =56]  Info MMSFocus _isStop = true 
2025-08-03 10:42:25.059 [Thd =56]  Info Default aSwitchIndex index:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default lens from ATF:
2025-08-03 10:42:25.059 [Thd =56]  Info Default objCount:3
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:P200;objId:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:P140;objId:1
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:P100;objId:2
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:;objId:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:;objId:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:;objId:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:;objId:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:;objId:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default lens from system settings:
2025-08-03 10:42:25.059 [Thd =56]  Info Default systemlensettings lens count:3
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:P200;objId:0
2025-08-03 10:42:25.059 [Thd =56]  Info Default ratio:P140;objId:1
2025-08-03 10:42:25.060 [Thd =56]  Info Default ratio:P100;objId:2
2025-08-03 10:42:25.062 [Thd =56]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:42:25.095 [Thd =56]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:42:25.098 [Thd =56]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:42:25.098 [Thd =56]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:42:25.099 [Thd =56]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:42:25.099 [Thd =56]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:42:25.099 [Thd =56]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:42:25.099 [Thd =56]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:42:25.099 [Thd =56]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:42:25.099 [Thd =56]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110261102065,StepStep:0.431711142934647,CosValueY:1,SinValueY:0
2025-08-03 10:42:25.355 [Thd =56]  Info strip vectorBegin:(12.119985,5.85751),VectorEnd:(6.814654,5.85751),CaptureBegin:(10.119985,5.85751)，CaptureEnd：(8.814654,5.85751),StepScan:0.435110261102065
2025-08-03 10:42:25.355 [Thd =56]  Info Default VectorBegin:(12.1199848686515,5.8575098518248)
2025-08-03 10:42:26.585 [Thd =59]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:42:26.585 [Thd =56]  Info Default SetMaxPower:300
2025-08-03 10:42:27.587 [Thd =69]  Info Default 打开光源，亮度：42%
2025-08-03 10:42:27.588 [Thd =68]  Info Default OpenLamp Transmission
2025-08-03 10:42:27.615 [Thd =50]  Info Default LaserLamp MaxPower:300,currentPower:126
2025-08-03 10:42:28.393 [Thd =67]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:42:29.116 [Thd =50]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:29.589 [Thd =56]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:42:29.589 [Thd =58]  Info Default 聚焦Track已关闭
2025-08-03 10:42:31.500 [Thd =56]  Info MMSFocus _isStop = true 
2025-08-03 10:42:31.702 [Thd =68]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:42:31.702 [Thd =68]  Info Default OpenLamp Reflection
2025-08-03 10:42:33.004 [Thd =56]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:42:33.004 [Thd =69]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:42:33.507 [Thd =68]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:42:36.006 [Thd =56]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:42:36.006 [Thd =68]  Info Default 聚焦Track已开启
2025-08-03 10:42:40.006 [Thd =65]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:42:40.006 [Thd =65]  Info Default ChangeLightPath: False!
2025-08-03 10:42:40.006 [Thd =65]  Info Default 标定中，请等待......
2025-08-03 10:42:40.006 [Thd =50]  Info Default CurrentSize:2048,2048
2025-08-03 10:42:40.007 [Thd =50]  Info Default Camera size no change
2025-08-03 10:42:40.007 [Thd =59]  Info Default CurrentSize:2048,2048
2025-08-03 10:42:40.007 [Thd =59]  Info Default Camera size no change
2025-08-03 10:42:40.008 [Thd =50]  Info Default Set camera size success
2025-08-03 10:42:40.008 [Thd =50]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:42:40.008 [Thd =59]  Info Default Set camera size success
2025-08-03 10:42:40.009 [Thd =59]  Info Default Current:TDIStage：TDI248，Target：TDI256
2025-08-03 10:42:40.988 [Thd =50]  Info Default Set camera parameter
2025-08-03 10:42:40.988 [Thd =50]  Info Default TriggerMode is On,dont set
2025-08-03 10:42:40.988 [Thd =50]  Info Default BUFFER_COUNT no change
2025-08-03 10:42:41.967 [Thd =59]  Info Default Set camera parameter
2025-08-03 10:42:41.968 [Thd =59]  Info Default TriggerMode is On,dont set
2025-08-03 10:42:41.968 [Thd =59]  Info Default BUFFER_COUNT no change
2025-08-03 10:42:41.973 [Thd =56]  Info Default scanStrips:1,LampResult:42
2025-08-03 10:42:41.973 [Thd =56]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:42:41.973 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:42.014 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:42.016 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:42.016 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:42.229 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:42.232 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:43.087 [Thd =56]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:42:43.087 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:43.111 [Thd =41]  Info Default LaserLamp MaxPower:300,currentPower:123
2025-08-03 10:42:43.505 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:43.506 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:43.507 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:43.720 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:43.722 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:44.577 [Thd =56]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:42:44.577 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:44.611 [Thd =41]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:44.628 [Thd =58]  Info Default LaserLamp MaxPower:300,currentPower:120
2025-08-03 10:42:44.998 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:44.999 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:44.999 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:45.213 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:45.216 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:46.070 [Thd =56]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:42:46.109 [Thd =56]  Info Default AutoLightReturn:49,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:42:46.109 [Thd =56]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:42:46.109 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:46.128 [Thd =58]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:46.161 [Thd =59]  Info Default LaserLamp MaxPower:300,currentPower:147
2025-08-03 10:42:46.530 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:46.531 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:46.531 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:46.744 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:46.747 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:47.598 [Thd =56]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:42:47.598 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:47.661 [Thd =59]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:47.678 [Thd =69]  Info Default LaserLamp MaxPower:300,currentPower:144
2025-08-03 10:42:48.017 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:48.018 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:48.019 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:48.231 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:48.233 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:49.082 [Thd =56]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:42:49.082 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:49.179 [Thd =69]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:49.212 [Thd =68]  Info Default LaserLamp MaxPower:300,currentPower:141
2025-08-03 10:42:49.499 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:49.501 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:49.501 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:49.714 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:49.718 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:50.568 [Thd =56]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:42:50.604 [Thd =56]  Info Default AutoLightReturn:44,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:42:50.604 [Thd =56]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:42:50.604 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:50.712 [Thd =68]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:50.729 [Thd =69]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 10:42:51.023 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:51.026 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:51.026 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:51.243 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:51.247 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:52.101 [Thd =56]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:42:52.101 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:52.230 [Thd =69]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:52.246 [Thd =65]  Info Default LaserLamp MaxPower:300,currentPower:129
2025-08-03 10:42:52.519 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:52.521 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:52.521 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:52.735 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:52.738 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:53.594 [Thd =56]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:42:53.594 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:53.747 [Thd =65]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:53.780 [Thd =59]  Info Default LaserLamp MaxPower:300,currentPower:126
2025-08-03 10:42:54.018 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:54.020 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:54.020 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:54.234 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:54.237 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:55.087 [Thd =56]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:42:55.123 [Thd =56]  Info Default AutoLightReturn:45,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:42:55.124 [Thd =56]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:42:55.124 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:55.281 [Thd =59]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:55.297 [Thd =58]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:42:55.539 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:55.540 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:55.541 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:55.754 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:55.757 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:56.606 [Thd =56]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:42:56.606 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:56.798 [Thd =58]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:56.830 [Thd =67]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 10:42:57.023 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:57.025 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:57.025 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:57.238 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:57.240 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:58.090 [Thd =56]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:42:58.090 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:58.332 [Thd =67]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:58.348 [Thd =65]  Info Default LaserLamp MaxPower:300,currentPower:129
2025-08-03 10:42:58.507 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:42:58.509 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:42:58.509 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:58.722 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:58.726 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:42:59.578 [Thd =56]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:42:59.615 [Thd =56]  Info Default AutoLightReturn:46,trans_result:-1,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:42:59.615 [Thd =56]  Info Default stripsIndex:0,lightIndex:0
2025-08-03 10:42:59.616 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:42:59.849 [Thd =65]  Error Default SyncSend recv cmd timeout
2025-08-03 10:42:59.880 [Thd =62]  Info Default LaserLamp MaxPower:300,currentPower:138
2025-08-03 10:43:00.033 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:00.036 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:00.036 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:43:00.253 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:00.256 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:01.108 [Thd =56]  Info Default stripsIndex:0,lightIndex:1
2025-08-03 10:43:01.108 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:43:01.380 [Thd =62]  Error Default SyncSend recv cmd timeout
2025-08-03 10:43:01.397 [Thd =50]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:43:01.528 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:01.530 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:01.530 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:43:01.743 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:01.746 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:02.601 [Thd =56]  Info Default stripsIndex:0,lightIndex:2
2025-08-03 10:43:02.601 [Thd =56]  Info Default strip.VectorBegin.X:12.1199848686515,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:43:02.899 [Thd =50]  Error Default SyncSend recv cmd timeout
2025-08-03 10:43:02.931 [Thd =62]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 10:43:03.020 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:03.022 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:03.022 [Thd =56]  Info Default strip.VectorBegin.X:6.81465408534532,strip.VectorBegin.Y:5.8575098518248
2025-08-03 10:43:03.236 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:03.239 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:04.087 [Thd =56]  Info Default AutoLightReturn:--------------SL----------
2025-08-03 10:43:04.124 [Thd =56]  Info Default AutoLightReturn:45,trans_result:0,ref_result:0，stripsIndex：0,scanStrips.Count:1
2025-08-03 10:43:04.124 [Thd =56]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:04.125 [Thd =56]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:04.125 [Thd =56]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:04.125 [Thd =56]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\OpticalCalibration
2025-08-03 10:43:04.327 [Thd =56]  Info Default Light Complete 5,ResultMessge:结果:45
2025-08-03 10:43:04.372 [Thd =68]  Warn Default 还原光源最大功率
2025-08-03 10:43:04.372 [Thd =69]  Info Default LaserLamp MaxPower:300
2025-08-03 10:43:04.432 [Thd =62]  Error Default SyncSend recv cmd timeout
2025-08-03 10:43:05.374 [Thd =62]  Info Default OpenLamp Transmission
2025-08-03 10:43:06.024 [Thd =59]  Info MMSFocus _isStop = true 
2025-08-03 10:43:06.177 [Thd =67]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:43:07.181 [Thd =62]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:43:07.181 [Thd =62]  Info Default CloseLamp Reflection
2025-08-03 10:43:08.205 [Thd =67]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:43:08.528 [Thd =59]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:43:08.528 [Thd =58]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:43:09.705 [Thd =67]  Error Default SyncSend recv cmd timeout
2025-08-03 10:43:10.530 [Thd =59]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:43:10.530 [Thd =62]  Info Default 聚焦Track已关闭
2025-08-03 10:43:17.387 [Thd =50]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:43:17.424 [Thd =69]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.WindLightCorrentionMethodName:<btnExecute_Click>b__37_1 After Memory usage:4849.98MB VirtualMemorySize:140.3 GB
2025-08-03 10:43:17.425 [Thd =58]  Info Default 光标定完成！
2025-08-03 10:43:21.389 [Thd =1]  Info Default LineCameraStage:25
2025-08-03 10:43:21.453 [Thd =1]  Info Default ModuleBaseControl_Loaded：WaferStagePoint:9.46050270254945,6.0068280398248,,,AFCalibrationPoint:,
2025-08-03 10:43:23.255 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:Make0Calibration Before Memory usage:4365.246MB VirtualMemorySize:140.1 GB
2025-08-03 10:43:23.272 [Thd =56]  Info Default LineCameraStage:25
2025-08-03 10:43:23.272 [Thd =64]  Info Default CurrentSize:2048,2048
2025-08-03 10:43:23.272 [Thd =64]  Info Default Camera size no change
2025-08-03 10:43:23.272 [Thd =67]  Info Default CurrentSize:2048,2048
2025-08-03 10:43:23.273 [Thd =67]  Info Default Camera size no change
2025-08-03 10:43:23.274 [Thd =64]  Info Default Set camera size success
2025-08-03 10:43:23.274 [Thd =64]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:43:23.274 [Thd =67]  Info Default Set camera size success
2025-08-03 10:43:23.274 [Thd =67]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 10:43:24.724 [Thd =64]  Info Default Set camera parameter
2025-08-03 10:43:24.724 [Thd =64]  Info Default TriggerMode is On,dont set
2025-08-03 10:43:24.724 [Thd =64]  Info Default BUFFER_COUNT no change
2025-08-03 10:43:25.228 [Thd =67]  Info Default Set camera parameter
2025-08-03 10:43:25.228 [Thd =67]  Info Default TriggerMode is On,dont set
2025-08-03 10:43:25.229 [Thd =67]  Info Default BUFFER_COUNT no change
2025-08-03 10:43:25.237 [Thd =56]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:43:25.237 [Thd =56]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:43:25.238 [Thd =56]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:43:25.238 [Thd =56]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:43:25.238 [Thd =56]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:43:25.238 [Thd =56]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:43:25.238 [Thd =56]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:43:25.238 [Thd =56]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110261102065,StepStep:0.431711142934647,CosValueY:1,SinValueY:0
2025-08-03 10:43:25.484 [Thd =56]  Info strip vectorBegin:(12.119985,5.85751),VectorEnd:(6.814654,5.85751),CaptureBegin:(10.119985,5.85751)，CaptureEnd：(8.814654,5.85751),StepScan:0.435110261102065
2025-08-03 10:43:25.484 [Thd =56]  Info Default Calibreation AreaToLinePoint:(9.68487460754945,5.8575098518248)
2025-08-03 10:43:25.484 [Thd =68]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:43:25.484 [Thd =56]  Info Default SetMaxPower:300
2025-08-03 10:43:26.485 [Thd =68]  Info Default 打开光源，亮度：45%
2025-08-03 10:43:26.485 [Thd =65]  Info Default OpenLamp Transmission
2025-08-03 10:43:26.516 [Thd =23]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:43:27.289 [Thd =64]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:43:28.017 [Thd =23]  Error Default SyncSend recv cmd timeout
2025-08-03 10:43:28.397 [Thd =56]  Info MMSFocus _isStop = true 
2025-08-03 10:43:29.901 [Thd =56]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:43:29.901 [Thd =67]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:43:30.101 [Thd =65]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:43:30.101 [Thd =65]  Info Default OpenLamp Reflection
2025-08-03 10:43:32.074 [Thd =65]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:43:38.497 [Thd =69]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:43:38.497 [Thd =69]  Info Default ChangeLightPath: False!
2025-08-03 10:43:38.497 [Thd =69]  Info Default 设置Make0标定环境中,请等待......
2025-08-03 10:43:38.497 [Thd =64]  Info Default 标定中，请稍等......
2025-08-03 10:43:40.499 [Thd =56]  Info MMSFocus _isStop = true 
2025-08-03 10:43:41.621 [Thd =69]  Warn Default Optimum:0.000um
2025-08-03 10:43:44.298 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:44.303 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:45.510 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:45.512 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:46.719 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:46.721 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:47.929 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:47.931 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:49.142 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:49.147 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:50.355 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:50.357 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:51.574 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:51.575 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:52.786 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:52.788 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:54.000 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:54.002 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:55.214 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:55.215 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:56.422 [Thd =56]  Info Default m_focusMapMode：0
2025-08-03 10:43:56.424 [Thd =56]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-10.1199848686515,EndPoint:-8.81465408534532
2025-08-03 10:43:56.990 [Thd =56]  Info Default FitPosition:0.235962595272046,score:44.8143913115764
2025-08-03 10:43:56.990 [Thd =56]  Info Default FitPosition:-0.231253955672107,score:103.191956495129
2025-08-03 10:43:56.990 [Thd =65]  Info Default Restore,Please wait......
2025-08-03 10:43:56.990 [Thd =56]  Info Default LaserLamp MaxPower:300
2025-08-03 10:43:56.991 [Thd =67]  Warn Default 还原光源最大功率
2025-08-03 10:43:57.992 [Thd =23]  Info MMSFocus _isStop = true 
2025-08-03 10:43:57.992 [Thd =41]  Info Default OpenLamp Transmission
2025-08-03 10:43:58.796 [Thd =67]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:43:59.799 [Thd =41]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:43:59.799 [Thd =41]  Info Default CloseLamp Reflection
2025-08-03 10:44:00.833 [Thd =67]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:44:02.335 [Thd =67]  Error Default SyncSend recv cmd timeout
2025-08-03 10:44:10.003 [Thd =64]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:44:10.085 [Thd =56]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:<Make0Calibration>b__23_1 End Memory usage:5216.469MB VirtualMemorySize:140.7 GB
2025-08-03 10:44:18.348 [Thd =1]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:44:18.597 [Thd =1]  Info Default make0 AreaToLinePoint:(9.68487460754945,5.8575098518248)
2025-08-03 10:44:18.652 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0MethodName:ButtonMake_Click Before Memory usage:4393.863MB VirtualMemorySize:140.1 GB
2025-08-03 10:44:19.011 [Thd =68]  Info MMSFocus _isStop = true 
2025-08-03 10:44:22.156 [Thd =68]  Info Default 保存AF标定结果成功！
2025-08-03 10:44:22.436 [Thd =68]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.Make0.UCMake0+<>c__DisplayClass33_0MethodName:<ButtonMake_Click>b__1 End Memory usage:4393.883MB VirtualMemorySize:140.1 GB
2025-08-03 10:44:22.436 [Thd =56]  Info Default SavePoint：WaferStagePoint:9.46050270254945,6.0068280398248,,,AFCalibrationPoint:66779603.1519404,71799975.9244638
2025-08-03 10:44:28.585 [Thd =56]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:44:28.585 [Thd =69]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:44:30.588 [Thd =56]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:44:30.588 [Thd =65]  Info Default 聚焦Track已关闭
2025-08-03 10:44:55.575 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:4515.734MB VirtualMemorySize:140.1 GB
2025-08-03 10:44:55.685 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click End Memory usage:4521.227MB VirtualMemorySize:140.1 GB
2025-08-03 10:44:55.799 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnFlatfield_Click Before Memory usage:4527.285MB VirtualMemorySize:140.1 GB
2025-08-03 10:44:58.854 [Thd =68]  Info Default 设置平场校正环境中......
2025-08-03 10:44:58.855 [Thd =62]  Info Default Flatfield Corrention Init******************
2025-08-03 10:44:59.460 [Thd =62]  Info MMSFocus _isStop = true 
2025-08-03 10:44:59.461 [Thd =62]  Info Default aSwitchIndex index:0
2025-08-03 10:44:59.461 [Thd =62]  Info Default lens from ATF:
2025-08-03 10:44:59.461 [Thd =62]  Info Default objCount:3
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:P200;objId:0
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:P140;objId:1
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:P100;objId:2
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:;objId:0
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:;objId:0
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:;objId:0
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:;objId:0
2025-08-03 10:44:59.461 [Thd =62]  Info Default ratio:;objId:0
2025-08-03 10:44:59.461 [Thd =62]  Info Default lens from system settings:
2025-08-03 10:44:59.461 [Thd =62]  Info Default systemlensettings lens count:3
2025-08-03 10:44:59.462 [Thd =62]  Info Default ratio:P200;objId:0
2025-08-03 10:44:59.462 [Thd =62]  Info Default ratio:P140;objId:1
2025-08-03 10:44:59.462 [Thd =62]  Info Default ratio:P100;objId:2
2025-08-03 10:44:59.464 [Thd =62]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:44:59.498 [Thd =62]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:44:59.501 [Thd =62]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:44:59.501 [Thd =62]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:44:59.502 [Thd =62]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:44:59.502 [Thd =62]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:44:59.502 [Thd =62]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:44:59.502 [Thd =62]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:44:59.502 [Thd =62]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:44:59.502 [Thd =62]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110261102065,StepStep:0.431711142934647,CosValueY:1,SinValueY:0
2025-08-03 10:44:59.747 [Thd =62]  Info strip vectorBegin:(-10.443023,70.886542),VectorEnd:(-15.748353,70.886542),CaptureBegin:(-12.443023,70.886542)，CaptureEnd：(-13.748353,70.886542),StepScan:0.435110261102065
2025-08-03 10:45:00.450 [Thd =67]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:45:00.450 [Thd =62]  Info Default SetMaxPower:300
2025-08-03 10:45:01.451 [Thd =67]  Info Default 打开光源，亮度：45%
2025-08-03 10:45:01.451 [Thd =61]  Info Default OpenLamp Transmission
2025-08-03 10:45:01.481 [Thd =68]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:45:02.255 [Thd =64]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:45:02.981 [Thd =68]  Error Default SyncSend recv cmd timeout
2025-08-03 10:45:03.452 [Thd =62]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:45:03.452 [Thd =23]  Info Default 聚焦Track已关闭
2025-08-03 10:45:05.066 [Thd =61]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:45:05.066 [Thd =61]  Info Default OpenLamp Reflection
2025-08-03 10:45:05.469 [Thd =62]  Info MMSFocus _isStop = true 
2025-08-03 10:45:06.873 [Thd =61]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:45:06.974 [Thd =62]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:45:06.974 [Thd =64]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:45:09.981 [Thd =62]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:45:09.981 [Thd =66]  Info Default 聚焦Track已开启
2025-08-03 10:45:13.463 [Thd =41]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:45:13.463 [Thd =41]  Info Default ChangeLightPath: False!
2025-08-03 10:45:13.463 [Thd =41]  Info Default Open lamp，Power:45%
2025-08-03 10:45:13.463 [Thd =62]  Info Default OpenLamp Transmission
2025-08-03 10:45:14.266 [Thd =61]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:45:14.466 [Thd =62]  Info Default OpenLamp Reflection
2025-08-03 10:45:16.273 [Thd =62]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:45:16.278 [Thd =66]  Info Default 平场校正中,请等待 ......
2025-08-03 10:45:16.278 [Thd =69]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:256
2025-08-03 10:45:16.278 [Thd =69]  Info Default CurrentSize:2048,2048
2025-08-03 10:45:16.279 [Thd =69]  Info Default Camera size no change
2025-08-03 10:45:16.279 [Thd =65]  Info Default FlatfieldCorrention SetCameraParam.ImageSize:2032,2048,Stages:192
2025-08-03 10:45:16.279 [Thd =65]  Info Default CurrentSize:2048,2048
2025-08-03 10:45:16.279 [Thd =65]  Info Default Camera size no change
2025-08-03 10:45:16.279 [Thd =68]  Info Default 扫描图片......
2025-08-03 10:45:16.280 [Thd =69]  Info Default Set camera size success
2025-08-03 10:45:16.281 [Thd =69]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 10:45:16.281 [Thd =65]  Info Default Set camera size success
2025-08-03 10:45:16.281 [Thd =65]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:45:17.732 [Thd =69]  Info Default Set camera parameter
2025-08-03 10:45:17.733 [Thd =69]  Info Default TriggerMode is On,dont set
2025-08-03 10:45:17.733 [Thd =69]  Info Default BUFFER_COUNT no change
2025-08-03 10:45:18.235 [Thd =65]  Info Default Set camera parameter
2025-08-03 10:45:18.235 [Thd =65]  Info Default TriggerMode is On,dont set
2025-08-03 10:45:18.235 [Thd =65]  Info Default BUFFER_COUNT no change
2025-08-03 10:45:23.238 [Thd =62]  Info Default FlatfieldCorrention scanStrips:1,Intensity:45
2025-08-03 10:45:23.238 [Thd =62]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:0,Light:45
2025-08-03 10:45:23.238 [Thd =62]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4430226631565,strip.VectorBegin.Y:70.8865416780189
2025-08-03 10:45:23.576 [Thd =62]  Info Default m_focusMapMode：0
2025-08-03 10:45:23.578 [Thd =62]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:12.4430226631565,EndPoint:13.7483534464627
2025-08-03 10:45:23.578 [Thd =62]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7483534464627,strip.VectorBegin.Y:70.8865416780189
2025-08-03 10:45:23.790 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\Flatfield
2025-08-03 10:45:23.790 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\Flatfield
2025-08-03 10:45:24.641 [Thd =62]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:1,Light:44
2025-08-03 10:45:24.641 [Thd =62]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4430226631565,strip.VectorBegin.Y:70.8865416780189
2025-08-03 10:45:24.668 [Thd =65]  Info Default LaserLamp MaxPower:300,currentPower:132
2025-08-03 10:45:25.061 [Thd =62]  Info Default m_focusMapMode：0
2025-08-03 10:45:25.063 [Thd =62]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:12.4430226631565,EndPoint:13.7483534464627
2025-08-03 10:45:25.064 [Thd =62]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7483534464627,strip.VectorBegin.Y:70.8865416780189
2025-08-03 10:45:25.279 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\Flatfield
2025-08-03 10:45:25.280 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\Flatfield
2025-08-03 10:45:26.135 [Thd =62]  Info Default FlatfieldCorrention stripsIndex:0,lightIndex:2,Light:45
2025-08-03 10:45:26.135 [Thd =62]  Info Default FlatfieldCorrention strip.VectorBegin.X:-10.4430226631565,strip.VectorBegin.Y:70.8865416780189
2025-08-03 10:45:26.169 [Thd =65]  Error Default SyncSend recv cmd timeout
2025-08-03 10:45:26.202 [Thd =56]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:45:26.557 [Thd =62]  Info Default m_focusMapMode：0
2025-08-03 10:45:26.558 [Thd =62]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:12.4430226631565,EndPoint:13.7483534464627
2025-08-03 10:45:26.558 [Thd =62]  Info Default FlatfieldCorrention strip.VectorBegin.X:-15.7483534464627,strip.VectorBegin.Y:70.8865416780189
2025-08-03 10:45:26.769 [Thd =4]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\Flatfield
2025-08-03 10:45:26.770 [Thd =31]  Info DirPath D:\VPTEK_AOI\StormData\Setups\6232161-yxc\rcp_DB_1\Flatfield
2025-08-03 10:45:27.702 [Thd =56]  Error Default SyncSend recv cmd timeout
2025-08-03 10:45:27.829 [Thd =64]  Warn Default 还原光源最大功率
2025-08-03 10:45:27.829 [Thd =62]  Info Default LaserLamp MaxPower:300
2025-08-03 10:45:28.830 [Thd =69]  Info Default OpenLamp Transmission
2025-08-03 10:45:28.990 [Thd =64]  Info MMSFocus _isStop = true 
2025-08-03 10:45:29.633 [Thd =66]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:45:30.638 [Thd =69]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:45:30.638 [Thd =69]  Info Default CloseLamp Reflection
2025-08-03 10:45:31.495 [Thd =64]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:45:31.495 [Thd =68]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:45:31.671 [Thd =65]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:45:33.171 [Thd =65]  Error Default SyncSend recv cmd timeout
2025-08-03 10:45:33.498 [Thd =64]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:45:33.498 [Thd =56]  Info Default 聚焦Track已关闭
2025-08-03 10:45:40.840 [Thd =41]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:45:40.840 [Thd =66]  Info Default 平场校正中,请等待 ......
2025-08-03 10:45:41.830 [Thd =69]  Info Default 校正完成
2025-08-03 10:46:04.465 [Thd =1]  Info flatfieldbtn Ok_Click  begin
2025-08-03 10:46:04.465 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm begin
2025-08-03 10:46:04.467 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy begin
2025-08-03 10:46:04.467 [Thd =1]  Info FlatFieldConfirm  ptr_T_collect Marshal.Copy end
2025-08-03 10:46:04.467 [Thd =1]  Info FlatFieldConfirm  FlatFieldConfirm end
2025-08-03 10:46:04.467 [Thd =1]  Info ExecuteSuccess  begin
2025-08-03 10:46:04.467 [Thd =1]  Info ExecuteSuccess  end
2025-08-03 10:46:05.561 [Thd =1]  Info flatfield btnOk_Click  end
2025-08-03 10:46:11.798 [Thd =1]  Info Default CDdefectResolution is 0.2
2025-08-03 10:46:11.798 [Thd =1]  Info Default CDdefectResolutionBil is 0.25
2025-08-03 10:46:11.798 [Thd =1]  Info Default PHdefectResolution is 0.2
2025-08-03 10:46:20.959 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 10:46:21.086 [Thd =23]  Info Default Start [1/1]
2025-08-03 10:46:21.086 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 10:46:21.086 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 10:46:21.087 [Thd =64]  Info Default 开始检查！
2025-08-03 10:46:21.525 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:19344666,146825192 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 10:46:21.526 [Thd =62]  Info Default 初始化插件
2025-08-03 10:46:21.526 [Thd =56]  Info Default CurrentSize:2048,2048
2025-08-03 10:46:21.526 [Thd =56]  Info Default Camera size no change
2025-08-03 10:46:21.526 [Thd =66]  Info Default CurrentSize:2048,2048
2025-08-03 10:46:21.526 [Thd =66]  Info Default Camera size no change
2025-08-03 10:46:21.527 [Thd =68]  Info Default 设置 TDI 相机参数...
2025-08-03 10:46:21.527 [Thd =41]  Info Default 初始化DB目录
2025-08-03 10:46:21.527 [Thd =56]  Info Default Set camera size success
2025-08-03 10:46:21.527 [Thd =56]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:46:21.528 [Thd =66]  Info Default Set camera size success
2025-08-03 10:46:21.528 [Thd =66]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 10:46:21.528 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 10:46:21.529 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 10:46:21.529 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 10:46:21.651 [Thd =1]  Info Default deltax_stage 13.8446836681006, deltay_stage:0.
2025-08-03 10:46:21.651 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0639581999743, 58.9417475686722), GDS ref(5500000, 138400000), gdsObject(19344666, 138400000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:46:21.651 [Thd =1]  Info Default deltax_stage 0, deltay_stage:8.42519922451183.
2025-08-03 10:46:21.651 [Thd =1]  Info Default MoveStageForMarkCol102 point (70.4891574244861, 58.9417475686722), GDS ref(19344666, 138400000), gdsObject(19344666, 146825192), stageRef(62.0639581999743, 58.9417475686722).
2025-08-03 10:46:21.651 [Thd =1]  Info Default located_pos:(70.4891574244861, 58.9417475686722)
2025-08-03 10:46:21.651 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.400106671667.
2025-08-03 10:46:21.652 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3367193928987, 72.7864312485445), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:46:21.652 [Thd =1]  Info Default located_pos:(-62.3367193928987, 72.7864312485445)
2025-08-03 10:46:21.652 [Thd =61]  Info Default Measuring the height difference of inspection area
2025-08-03 10:46:22.978 [Thd =56]  Info Default Set camera parameter
2025-08-03 10:46:22.978 [Thd =56]  Info Default TriggerMode is On,dont set
2025-08-03 10:46:22.979 [Thd =56]  Info Default BUFFER_COUNT no change
2025-08-03 10:46:23.483 [Thd =66]  Info Default Set camera parameter
2025-08-03 10:46:23.483 [Thd =66]  Info Default TriggerMode is On,dont set
2025-08-03 10:46:23.483 [Thd =66]  Info Default BUFFER_COUNT no change
2025-08-03 10:46:28.757 [Thd =65]  Info Default 初始化DPU服务器！
2025-08-03 10:46:28.757 [Thd =67]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 10:46:31.196 [Thd =58]  Info MMSFocus _isStop = true 
2025-08-03 10:46:31.913 [Thd =41]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430693,"ServiceStartTime":"2025\/8\/3 10:33:40","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:31.914 [Thd =41]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430693,"ServiceStartTime":"2025\/8\/3 10:33:40","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":1},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:33.421 [Thd =65]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430694,"ServiceStartTime":"2025\/8\/3 10:33:41","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:33.422 [Thd =66]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430694,"ServiceStartTime":"2025\/8\/3 10:34:38","DPUDeviceStatus":1,"DPUDeviceOfflineMsg":1,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:34.424 [Thd =69]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430698,"ServiceStartTime":"2025\/8\/3 10:46:30","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU3","DeviceID":"A000-A67Q-4651","DeviceType":0,"DevIp":"10.0.10.103","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:34.465 [Thd =53]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430698,"ServiceStartTime":"2025\/8\/3 10:46:30","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU2","DeviceID":"A000-A66Q-4651","DeviceType":0,"DevIp":"10.0.10.102","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:35.948 [Thd =65]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430699,"ServiceStartTime":"2025\/8\/3 10:46:33","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU1","DeviceID":"A000-A65Q-4651","DeviceType":0,"DevIp":"10.0.10.101","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130733,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 4080 SUPER","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:35.972 [Thd =41]  Error Default The DPU online and offline message was received！{"KeepTimeStamp":430699,"ServiceStartTime":"2025\/8\/3 10:47:28","DPUDeviceStatus":0,"DPUDeviceOfflineMsg":0,"BaseInfo":{"DeviceName":"DPU4","DeviceID":"A000-A68Q-4651","DeviceType":0,"DevIp":"10.0.10.104","DevPort":18001,"PatchVersion":null},"ResInfo":{"mem_percent":29,"mem_size":130729,"ramdisk_percent":0,"ramdisk_size":32766,"msg_count":0,"gpu_num":4,"gpu_info":[{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0},{"name":"NVIDIA GeForce RTX 3080 Ti","utilization_core":0,"utilization_mem":0}]},"ServiceVersion":"1.0.0.10406","AlgoVersion":"1.2.7.29.62606.10457.41771"}
2025-08-03 10:46:36.284 [Thd =67]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 10:46:36.314 [Thd =1]  Info Default Register inspect event！
2025-08-03 10:46:36.325 [Thd =1]  Info Default initial*****Light_intensity:45, min:10, max:220
2025-08-03 10:46:36.326 [Thd =66]  Info Default 初始化检测数据
2025-08-03 10:46:36.326 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 10:46:36.326 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 10:46:36.326 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3367193928987, reference point Stage_Y: 72.7864312485445, starting point GDS_X: 19344666, starting point GDS_Y: 146825192
2025-08-03 10:46:36.326 [Thd =69]  Info Default m_start_strip_no:0
2025-08-03 10:46:36.326 [Thd =69]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 10:46:36.326 [Thd =69]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\6AC34B88F4E5C006781084A1C39D6D9C.oas","m_layerMode":0,"m_layerNo":9,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1062,"m_col":1341,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":19344666,"m_beginY":146825192,"m_endX":133034765,"m_endY":5595593,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1300,"m_tolerance_mode":0,"m_x_tolerance":-0.022,"m_y_tolerance":-0.036,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6232161-YXC\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":266,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.15,"m_optical_head_id":0,"m_outer_round":0.15,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,220,3,0,1130102784,1065353216,1065353216,0,-203,60838],"m_R_collect":[200,201,111,0,1128792064,1065353216,1065353216,-2147481856,-2035754264,541],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.116,"m_y_tolerance_R":-0.11,"m_inner_round_R":0.25,"m_outer_round_R":0.25,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 10:46:36.328 [Thd =69]  Info Default m_line_camera_cols:325
2025-08-03 10:46:36.328 [Thd =69]  Info Default AllocHGlobal img mem pic_count:325, img_w:2032, img_h:2048
2025-08-03 10:46:36.328 [Thd =69]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 10:46:36.332 [Thd =69]  Info Default SetDistortionPara disaabled
2025-08-03 10:46:36.332 [Thd =69]  Info Default Set distortion correction parameters End
2025-08-03 10:46:36.332 [Thd =69]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1062,pic_count(Grid2.Cols):1300,pic_count_pack(Grid.Cols):1341,max_batch:20,mode:0,m_channel:4 
2025-08-03 10:46:36.437 [Thd =69]  Info Default InitDie2DBRes Success!!!!
2025-08-03 10:46:42.112 [Thd =58]  Info Default DemarcateInspectZ:1.3
2025-08-03 10:46:42.891 [Thd =58]  Info MMSFocus _isStop = true 
2025-08-03 10:46:54.106 [Thd =58]  Info Default DemarcateInspectZ:1.6
2025-08-03 10:46:54.885 [Thd =58]  Info MMSFocus _isStop = true 
2025-08-03 10:47:05.004 [Thd =58]  Info Default DemarcateInspectZ:-0.8
2025-08-03 10:47:05.783 [Thd =58]  Info MMSFocus _isStop = true 
2025-08-03 10:47:17.004 [Thd =58]  Info Default DemarcateInspectZ:-0.3
2025-08-03 10:47:17.011 [Thd =58]  Info Default MarkHeightDifference:2.4
2025-08-03 10:47:17.012 [Thd =5]  Info Default Difference of the Inspection Area2.40μm
2025-08-03 10:47:38.133 [Thd =1]  Info Default Successful alignment！
2025-08-03 10:47:38.133 [Thd =62]  Info Default 对准完成！
2025-08-03 10:47:38.133 [Thd =56]  Info Default 稍等！设置相机参数中
2025-08-03 10:47:38.133 [Thd =65]  Info Default 注册相机取图
2025-08-03 10:47:38.134 [Thd =68]  Info Default 移动到起始点位
2025-08-03 10:47:38.796 [Thd =58]  Info MMSFocus _isStop = true 
2025-08-03 10:47:39.001 [Thd =58]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110261102065,StepStep:0.431711142934647,CosValueY:1,SinValueY:0
2025-08-03 10:47:39.001 [Thd =61]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:47:39.001 [Thd =58]  Info Default SetMaxPower:300
2025-08-03 10:47:40.003 [Thd =68]  Info Default 打开光源，亮度：45%
2025-08-03 10:47:40.003 [Thd =56]  Info Default OpenLamp Transmission
2025-08-03 10:47:40.038 [Thd =23]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:47:40.806 [Thd =61]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:47:41.538 [Thd =23]  Error Default SyncSend recv cmd timeout
2025-08-03 10:47:42.005 [Thd =62]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:47:42.005 [Thd =65]  Info Default 聚焦Track已关闭
2025-08-03 10:47:43.307 [Thd =62]  Info MMSFocus _isStop = true 
2025-08-03 10:47:43.618 [Thd =56]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:47:43.618 [Thd =56]  Info Default OpenLamp Reflection
2025-08-03 10:47:44.811 [Thd =62]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:47:44.811 [Thd =64]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:47:45.425 [Thd =56]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:47:46.812 [Thd =62]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:47:46.812 [Thd =69]  Info Default 聚焦Track已开启
2025-08-03 10:47:52.013 [Thd =5]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:47:52.013 [Thd =5]  Info Default ChangeLightPath: False!
2025-08-03 10:47:52.013 [Thd =62]  Info Default 执行MarkOffSet......
2025-08-03 10:47:52.013 [Thd =53]  Info Default CurrentSize:2048,2048
2025-08-03 10:47:52.013 [Thd =53]  Info Default Camera size no change
2025-08-03 10:47:52.014 [Thd =53]  Info Default Set camera size success
2025-08-03 10:47:52.014 [Thd =53]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:47:52.990 [Thd =53]  Info Default Set camera parameter
2025-08-03 10:47:52.990 [Thd =53]  Info Default TriggerMode is On,dont set
2025-08-03 10:47:52.990 [Thd =53]  Info Default BUFFER_COUNT no change
2025-08-03 10:47:52.993 [Thd =58]  Info strip vectorBegin:(59.471715,72.637113),VectorEnd:(64.777046,72.637113),CaptureBegin:(61.471715,72.637113)，CaptureEnd：(62.777046,72.637113),StepScan:0.435110261102065
2025-08-03 10:47:55.255 [Thd =58]  Info Default m_focusMapMode：0
2025-08-03 10:47:55.257 [Thd =58]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:-61.4717149415637,EndPoint:-62.7770457248699
2025-08-03 10:47:55.451 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 
2025-08-03 10:47:55.466 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 
2025-08-03 10:47:55.771 [Thd =31]  Info Default stormCore.MatchTemplate:0.8643587
2025-08-03 10:47:55.771 [Thd =68]  Warn Default Mark offset match score:0.86436
2025-08-03 10:47:56.016 [Thd =58]  Info MMSFocus _isStop = true 
2025-08-03 10:47:56.541 [Thd =23]  Warn Default 还原光源最大功率
2025-08-03 10:47:56.541 [Thd =58]  Info Default LaserLamp MaxPower:300
2025-08-03 10:47:57.543 [Thd =61]  Info Default OpenLamp Transmission
2025-08-03 10:47:57.543 [Thd =57]  Info MMSFocus _isStop = true 
2025-08-03 10:47:58.346 [Thd =67]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:47:59.350 [Thd =61]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:47:59.350 [Thd =61]  Info Default CloseLamp Reflection
2025-08-03 10:48:00.047 [Thd =57]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:48:00.047 [Thd =56]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:48:00.378 [Thd =53]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:48:01.878 [Thd =53]  Error Default SyncSend recv cmd timeout
2025-08-03 10:48:02.049 [Thd =57]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:48:02.049 [Thd =57]  Info Default 聚焦Track已关闭
2025-08-03 10:48:09.556 [Thd =62]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:48:10.299 [Thd =1]  Info Default Move to the inspect start point，Starting point coordinates：X:70.4891574244861,Y:58.9417475686722,OffSet.X:4,OffSet.Y:4
2025-08-03 10:48:10.299 [Thd =57]  Warn Default 标记偏移点X:4，Y:4
2025-08-03 10:48:12.420 [Thd =64]  Info Default Zposition:0
2025-08-03 10:48:13.192 [Thd =58]  Info Default Wait! Setting camera parameters 
2025-08-03 10:48:13.193 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 10:48:13.195 [Thd =1]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:48:13.196 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 10:48:13.196 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 10:48:13.196 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() Running ! 
2025-08-03 10:48:13.196 [Thd =1]  Info Default AutoWorderHelper:StartWorker.
2025-08-03 10:48:13.196 [Thd =1]  Info Default AutoWorderHelper:SaveTask2DB.
2025-08-03 10:48:13.433 [Thd =1]  Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 2955
2025-08-03 10:48:13.434 [Thd =1]  Info Default AutoWorderHelper:InitInspectingData.
2025-08-03 10:48:13.434 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0
2025-08-03 10:48:13.434 [Thd =56]  Info Default 检测线程启动！
2025-08-03 10:48:13.435 [Thd =35]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 10:48:13.435 [Thd =53]  Info Default 结果处理线程启动！
2025-08-03 10:48:13.437 [Thd =35]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:48:13.438 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2955
2025-08-03 10:48:13.438 [Thd =35]  Info Default SetSystemStatus Success
2025-08-03 10:48:13.439 [Thd =35]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 10:48:13.441 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2955
2025-08-03 10:48:13.682 [Thd =35]  Info MMSFocus _isStop = true 
2025-08-03 10:48:13.683 [Thd =35]  Info Default aSwitchIndex index:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default lens from ATF:
2025-08-03 10:48:13.683 [Thd =35]  Info Default objCount:3
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:P200;objId:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:P140;objId:1
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:P100;objId:2
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:;objId:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:;objId:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:;objId:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:;objId:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:;objId:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default lens from system settings:
2025-08-03 10:48:13.683 [Thd =35]  Info Default systemlensettings lens count:3
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:P200;objId:0
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:P140;objId:1
2025-08-03 10:48:13.683 [Thd =35]  Info Default ratio:P100;objId:2
2025-08-03 10:48:13.686 [Thd =35]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:48:13.719 [Thd =35]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:48:13.720 [Thd =35]  Info Default defectData.RecivePicCount:0
2025-08-03 10:48:13.720 [Thd =35]  Info Default start inspect task pic_count of one strip:325, big_strip_count:266. 
2025-08-03 10:48:13.720 [Thd =35]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:48:13.720 [Thd =35]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:48:13.720 [Thd =35]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:48:13.720 [Thd =35]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:48:13.720 [Thd =35]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:48:13.720 [Thd =35]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:48:13.720 [Thd =35]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:48:13.720 [Thd =35]  Info Default scaleX: 0.999998723835009, scaleY:0.999999142511454
2025-08-03 10:48:13.720 [Thd =35]  Info Default Orth_Y_BeforR: 0.141764346498991,StageScaleX:0.999998723835009,Y:0.999999142511454
2025-08-03 10:48:13.720 [Thd =35]  Info Default LengthOfAccelerationAndDeceleration: 2
2025-08-03 10:48:15.722 [Thd =35]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:48:15.723 [Thd =62]  Info Default 聚焦Track已关闭
2025-08-03 10:48:15.723 [Thd =65]  Info Default 正在切换线阵相机光路
2025-08-03 10:48:27.733 [Thd =35]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:48:27.733 [Thd =35]  Info Default ChangeLightPath: False!
2025-08-03 10:48:27.733 [Thd =35]  Info Default SnakeScanLine: Paddle Rotate angle is 0 !
2025-08-03 10:48:29.829 [Thd =35]  Info Default InspectOverlayX: 16, InspectOverlayY:16
2025-08-03 10:48:29.842 [Thd =69]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:48:29.842 [Thd =35]  Info Default SetMaxPower:300
2025-08-03 10:48:30.844 [Thd =65]  Info Default 正在打开透射、反射光源，亮度 45%
2025-08-03 10:48:30.844 [Thd =35]  Info Default OpenLamp Transmission
2025-08-03 10:48:31.647 [Thd =5]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:48:34.457 [Thd =35]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:48:34.457 [Thd =35]  Info Default OpenLamp Reflection
2025-08-03 10:48:35.472 [Thd =57]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:48:36.263 [Thd =35]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:48:36.263 [Thd =67]  Info Default 正在启用实时聚焦
2025-08-03 10:48:36.696 [Thd =35]  Info MMSFocus _isStop = true 
2025-08-03 10:48:36.974 [Thd =57]  Error Default SyncSend recv cmd timeout
2025-08-03 10:48:39.201 [Thd =35]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:48:39.201 [Thd =56]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:48:40.205 [Thd =41]  Info Default 正在设置扫描控制参数
2025-08-03 10:48:40.205 [Thd =35]  Info Default GetParameter: stepCompX is 0.000212456182178743
2025-08-03 10:48:41.007 [Thd =35]  Info Default Allocate resources!
2025-08-03 10:48:41.007 [Thd =35]  Info Default GPU num is 2!
2025-08-03 10:48:43.009 [Thd =35]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:48:43.009 [Thd =23]  Info Default 聚焦Track已开启
2025-08-03 10:48:43.009 [Thd =35]  Info Default Start scanning; Start strip number: 0, total strip number: 266
2025-08-03 10:48:43.010 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 0
2025-08-03 10:48:43.010 [Thd =5]  Info Default  开始扫描条带； [0/266]
2025-08-03 10:48:43.020 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:48:43.023 [Thd =35]  Info Default CaptureBeginX: 70.92429, CaptureBeginY:58.56978, CaptureEndX:-70.96517, CaptureEndY:58.56978, VectorBeginX:72.48918, VectorBeginY:58.56978, VectorEndX:-72.92166, VectorEndY:58.56978, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:48:43.023 [Thd =35]  Info Default ***row:0, vectorBeginX:72.489, vectorBeginY:58.570, captureBeginX:70.924, captureBeginY:58.570, captureEndX:-70.965, captureEndY:58.570, vectorEndX:-72.922, vectorEndY:58.570
2025-08-03 10:48:43.023 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:48:43.025 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9242858680371,EndPoint:70.9651702773463
2025-08-03 10:48:47.929 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:0
2025-08-03 10:48:47.929 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:48:47.929 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:48:47.931 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:0
2025-08-03 10:48:47.931 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:48:47.931 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:A_SourceLightType
2025-08-03 10:48:47.932 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,A_SourceLightType
2025-08-03 10:48:47.932 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,B_SourceLightType
2025-08-03 10:48:47.932 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:B_SourceLightType
2025-08-03 10:48:48.101 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;0/266,
2025-08-03 10:48:48.111 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:48:48.170 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:48:48.390 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:48:48.413 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_0_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:48:48.517 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 1
2025-08-03 10:48:48.517 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 1
2025-08-03 10:48:48.517 [Thd =65]  Info Default  开始扫描条带； [1/266]
2025-08-03 10:48:48.526 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:48:48.529 [Thd =35]  Info Default ***row:1, vectorBeginX:-72.922, vectorBeginY:58.141, captureBeginX:-71.303, captureBeginY:58.141, captureEndX:70.587, captureEndY:58.141, vectorEndX:72.489, vectorEndY:58.141
2025-08-03 10:48:48.529 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:48:48.530 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3025755697956,EndPoint:-70.5868805755878
2025-08-03 10:48:48.888 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:48:48.891 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_0_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:48:53.436 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:1
2025-08-03 10:48:53.437 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:48:53.437 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:48:53.439 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:1
2025-08-03 10:48:53.439 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:48:53.439 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:A_SourceLightType
2025-08-03 10:48:53.439 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,A_SourceLightType
2025-08-03 10:48:53.439 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,B_SourceLightType
2025-08-03 10:48:53.439 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:B_SourceLightType
2025-08-03 10:48:53.612 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;1/266,
2025-08-03 10:48:53.621 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:48:53.660 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:48:53.898 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:48:53.914 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_1_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:48:54.001 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 2
2025-08-03 10:48:54.001 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 2
2025-08-03 10:48:54.001 [Thd =58]  Info Default  开始扫描条带； [2/266]
2025-08-03 10:48:54.009 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:48:54.012 [Thd =35]  Info Default CaptureBeginX: 70.92432, CaptureBeginY:57.71315, CaptureEndX:-70.96513, CaptureEndY:57.71315, VectorBeginX:72.48921, VectorBeginY:57.71315, VectorEndX:-72.92162, VectorEndY:57.71315, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:48:54.012 [Thd =35]  Info Default ***row:2, vectorBeginX:72.489, vectorBeginY:57.713, captureBeginX:70.924, captureBeginY:57.713, captureEndX:-70.965, captureEndY:57.713, vectorEndX:-72.922, vectorEndY:57.713
2025-08-03 10:48:54.012 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:48:54.015 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9243211931222,EndPoint:70.9651349522613
2025-08-03 10:48:54.387 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:48:54.390 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_1_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:48:58.918 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:2
2025-08-03 10:48:58.919 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:48:58.919 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:48:58.920 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:2
2025-08-03 10:48:58.921 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:48:58.921 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:A_SourceLightType
2025-08-03 10:48:58.921 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:B_SourceLightType
2025-08-03 10:48:58.921 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,A_SourceLightType
2025-08-03 10:48:58.921 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,B_SourceLightType
2025-08-03 10:48:59.090 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;2/266,
2025-08-03 10:48:59.099 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:48:59.198 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:48:59.390 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:48:59.405 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_2_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:48:59.533 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 3
2025-08-03 10:48:59.533 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 3
2025-08-03 10:48:59.533 [Thd =53]  Info Default  开始扫描条带； [3/266]
2025-08-03 10:48:59.542 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:48:59.545 [Thd =35]  Info Default ***row:3, vectorBeginX:-72.922, vectorBeginY:57.285, captureBeginX:-71.303, captureBeginY:57.285, captureEndX:70.587, captureEndY:57.285, vectorEndX:72.489, vectorEndY:57.285
2025-08-03 10:48:59.545 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:48:59.546 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3025402447106,EndPoint:-70.5869159006728
2025-08-03 10:48:59.890 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:48:59.893 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_2_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:04.451 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:3
2025-08-03 10:49:04.451 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:04.451 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:04.453 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:3
2025-08-03 10:49:04.453 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:04.453 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:A_SourceLightType
2025-08-03 10:49:04.453 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:B_SourceLightType
2025-08-03 10:49:04.453 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,A_SourceLightType
2025-08-03 10:49:04.454 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,B_SourceLightType
2025-08-03 10:49:04.625 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;3/266,
2025-08-03 10:49:04.633 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:04.670 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:04.912 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:04.928 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_3_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:05.017 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 4
2025-08-03 10:49:05.017 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 4
2025-08-03 10:49:05.017 [Thd =41]  Info Default  开始扫描条带； [4/266]
2025-08-03 10:49:05.026 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:49:05.029 [Thd =35]  Info Default CaptureBeginX: 70.92436, CaptureBeginY:56.85653, CaptureEndX:-70.96510, CaptureEndY:56.85653, VectorBeginX:72.48925, VectorBeginY:56.85653, VectorEndX:-72.92159, VectorEndY:56.85653, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:49:05.029 [Thd =35]  Info Default ***row:4, vectorBeginX:72.489, vectorBeginY:56.857, captureBeginX:70.924, captureBeginY:56.857, captureEndX:-70.965, captureEndY:56.857, vectorEndX:-72.922, vectorEndY:56.857
2025-08-03 10:49:05.029 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:05.031 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9243565182072,EndPoint:70.9650996271762
2025-08-03 10:49:05.406 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:05.409 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_3_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:07.017 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:07
2025-08-03 10:49:07.029 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:07
2025-08-03 10:49:09.935 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:4
2025-08-03 10:49:09.935 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:09.935 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:09.936 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:4
2025-08-03 10:49:09.936 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:09.936 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:A_SourceLightType
2025-08-03 10:49:09.937 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:B_SourceLightType
2025-08-03 10:49:09.937 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,A_SourceLightType
2025-08-03 10:49:09.937 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,B_SourceLightType
2025-08-03 10:49:10.117 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;4/266,
2025-08-03 10:49:10.126 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:10.172 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:10.397 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:10.405 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_4_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:10.508 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 5
2025-08-03 10:49:10.508 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 5
2025-08-03 10:49:10.508 [Thd =62]  Info Default  开始扫描条带； [5/266]
2025-08-03 10:49:10.517 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:49:10.520 [Thd =35]  Info Default ***row:5, vectorBeginX:-72.922, vectorBeginY:56.428, captureBeginX:-71.303, captureBeginY:56.428, captureEndX:70.587, captureEndY:56.428, vectorEndX:72.489, vectorEndY:56.428
2025-08-03 10:49:10.520 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:10.522 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3025049196256,EndPoint:-70.5869512257579
2025-08-03 10:49:10.878 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:10.881 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_4_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:14.547 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:14
2025-08-03 10:49:14.567 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:14
2025-08-03 10:49:15.427 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:5
2025-08-03 10:49:15.427 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:15.427 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:15.429 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:5
2025-08-03 10:49:15.429 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:15.429 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:A_SourceLightType
2025-08-03 10:49:15.429 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,A_SourceLightType
2025-08-03 10:49:15.429 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,B_SourceLightType
2025-08-03 10:49:15.430 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:B_SourceLightType
2025-08-03 10:49:15.600 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;5/266,
2025-08-03 10:49:15.610 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:15.652 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:15.889 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:15.892 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_5_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:15.988 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 6
2025-08-03 10:49:15.988 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 6
2025-08-03 10:49:15.988 [Thd =61]  Info Default  开始扫描条带； [6/266]
2025-08-03 10:49:16.001 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:49:16.004 [Thd =35]  Info Default CaptureBeginX: 70.92439, CaptureBeginY:55.99990, CaptureEndX:-70.96506, CaptureEndY:55.99990, VectorBeginX:72.48928, VectorBeginY:55.99990, VectorEndX:-72.92155, VectorEndY:55.99990, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:49:16.004 [Thd =35]  Info Default ***row:6, vectorBeginX:72.489, vectorBeginY:56.000, captureBeginX:70.924, captureBeginY:56.000, captureEndX:-70.965, captureEndY:56.000, vectorEndX:-72.922, vectorEndY:56.000
2025-08-03 10:49:16.004 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:16.005 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9243918432923,EndPoint:70.9650643020912
2025-08-03 10:49:16.370 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:16.372 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_5_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:20.587 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:20
2025-08-03 10:49:20.598 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:20
2025-08-03 10:49:20.908 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:6
2025-08-03 10:49:20.908 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:20.908 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:20.910 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:6
2025-08-03 10:49:20.910 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:20.910 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:A_SourceLightType
2025-08-03 10:49:20.910 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,A_SourceLightType
2025-08-03 10:49:20.910 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,B_SourceLightType
2025-08-03 10:49:20.911 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:B_SourceLightType
2025-08-03 10:49:21.088 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;6/266,
2025-08-03 10:49:21.097 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:21.144 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:21.372 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:21.375 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_6_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:21.489 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 7
2025-08-03 10:49:21.489 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 7
2025-08-03 10:49:21.489 [Thd =68]  Info Default  开始扫描条带； [7/266]
2025-08-03 10:49:21.498 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:49:21.500 [Thd =35]  Info Default ***row:7, vectorBeginX:-72.922, vectorBeginY:55.572, captureBeginX:-71.302, captureBeginY:55.572, captureEndX:70.587, captureEndY:55.572, vectorEndX:72.489, vectorEndY:55.572
2025-08-03 10:49:21.501 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:21.502 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3024695945405,EndPoint:-70.5869865508429
2025-08-03 10:49:21.849 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:21.850 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_6_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:24.612 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:24
2025-08-03 10:49:24.632 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:24
2025-08-03 10:49:25.637 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:25
2025-08-03 10:49:25.649 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:25
2025-08-03 10:49:26.409 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:7
2025-08-03 10:49:26.409 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:26.409 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:26.411 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:7
2025-08-03 10:49:26.411 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:26.411 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:A_SourceLightType
2025-08-03 10:49:26.412 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:B_SourceLightType
2025-08-03 10:49:26.412 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,A_SourceLightType
2025-08-03 10:49:26.412 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,B_SourceLightType
2025-08-03 10:49:26.590 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;7/266,
2025-08-03 10:49:26.599 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:26.645 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:26.871 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:26.873 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_7_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:26.990 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 8
2025-08-03 10:49:26.990 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 8
2025-08-03 10:49:26.990 [Thd =57]  Info Default  开始扫描条带； [8/266]
2025-08-03 10:49:26.999 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:49:27.002 [Thd =35]  Info Default CaptureBeginX: 70.92443, CaptureBeginY:55.14328, CaptureEndX:-70.96503, CaptureEndY:55.14328, VectorBeginX:72.48932, VectorBeginY:55.14328, VectorEndX:-72.92152, VectorEndY:55.14328, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:49:27.002 [Thd =35]  Info Default ***row:8, vectorBeginX:72.489, vectorBeginY:55.143, captureBeginX:70.924, captureBeginY:55.143, captureEndX:-70.965, captureEndY:55.143, vectorEndX:-72.922, vectorEndY:55.143
2025-08-03 10:49:27.002 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:27.004 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9244271683773,EndPoint:70.9650289770061
2025-08-03 10:49:27.350 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:27.353 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_7_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:31.907 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:8
2025-08-03 10:49:31.907 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:31.907 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:31.909 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:8
2025-08-03 10:49:31.909 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:31.910 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:A_SourceLightType
2025-08-03 10:49:31.910 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:B_SourceLightType
2025-08-03 10:49:31.910 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,A_SourceLightType
2025-08-03 10:49:31.910 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,B_SourceLightType
2025-08-03 10:49:32.084 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;8/266,
2025-08-03 10:49:32.094 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:32.160 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:32.374 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:32.376 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_8_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:32.497 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 9
2025-08-03 10:49:32.497 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 9
2025-08-03 10:49:32.497 [Thd =41]  Info Default  开始扫描条带； [9/266]
2025-08-03 10:49:32.507 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:49:32.510 [Thd =35]  Info Default ***row:9, vectorBeginX:-72.922, vectorBeginY:54.715, captureBeginX:-71.302, captureBeginY:54.715, captureEndX:70.587, captureEndY:54.715, vectorEndX:72.489, vectorEndY:54.715
2025-08-03 10:49:32.510 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:32.511 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3024342694555,EndPoint:-70.5870218759279
2025-08-03 10:49:32.853 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:32.856 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_8_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:33.171 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:33
2025-08-03 10:49:33.185 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:33
2025-08-03 10:49:37.419 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:9
2025-08-03 10:49:37.420 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:37.420 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:37.421 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:9
2025-08-03 10:49:37.421 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:37.421 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:A_SourceLightType
2025-08-03 10:49:37.421 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:B_SourceLightType
2025-08-03 10:49:37.421 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,A_SourceLightType
2025-08-03 10:49:37.421 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,B_SourceLightType
2025-08-03 10:49:37.598 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;9/266,
2025-08-03 10:49:37.607 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:37.656 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:37.699 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:37
2025-08-03 10:49:37.709 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:37
2025-08-03 10:49:37.884 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:37.886 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_9_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:38.001 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 10
2025-08-03 10:49:38.001 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 10
2025-08-03 10:49:38.001 [Thd =65]  Info Default  开始扫描条带； [10/266]
2025-08-03 10:49:38.010 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:49:38.013 [Thd =35]  Info Default CaptureBeginX: 70.92446, CaptureBeginY:54.28666, CaptureEndX:-70.96499, CaptureEndY:54.28666, VectorBeginX:72.48935, VectorBeginY:54.28666, VectorEndX:-72.92148, VectorEndY:54.28666, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:49:38.013 [Thd =35]  Info Default ***row:10, vectorBeginX:72.489, vectorBeginY:54.287, captureBeginX:70.924, captureBeginY:54.287, captureEndX:-70.965, captureEndY:54.287, vectorEndX:-72.921, vectorEndY:54.287
2025-08-03 10:49:38.013 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:38.015 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9244624934623,EndPoint:70.9649936519211
2025-08-03 10:49:38.404 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:38.412 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_9_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:42.727 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:42
2025-08-03 10:49:42.743 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:42
2025-08-03 10:49:42.925 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:10
2025-08-03 10:49:42.925 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:42.925 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:43.002 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:10
2025-08-03 10:49:43.003 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:43.003 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:B_SourceLightType
2025-08-03 10:49:43.003 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:A_SourceLightType
2025-08-03 10:49:43.003 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,B_SourceLightType
2025-08-03 10:49:43.003 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,A_SourceLightType
2025-08-03 10:49:43.098 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;10/266,
2025-08-03 10:49:43.108 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:43.192 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:43.463 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:43.466 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_10_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:43.536 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 11
2025-08-03 10:49:43.536 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 11
2025-08-03 10:49:43.536 [Thd =65]  Info Default  开始扫描条带； [11/266]
2025-08-03 10:49:43.545 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:49:43.548 [Thd =35]  Info Default ***row:11, vectorBeginX:-72.921, vectorBeginY:53.858, captureBeginX:-71.302, captureBeginY:53.858, captureEndX:70.587, captureEndY:53.858, vectorEndX:72.489, vectorEndY:53.858
2025-08-03 10:49:43.548 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:43.549 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3023989443705,EndPoint:-70.587057201013
2025-08-03 10:49:43.944 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:43.947 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_10_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:48.260 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:48
2025-08-03 10:49:48.273 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:48
2025-08-03 10:49:48.455 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:11
2025-08-03 10:49:48.455 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:48.455 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:48.457 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:11
2025-08-03 10:49:48.457 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:48.457 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:A_SourceLightType
2025-08-03 10:49:48.457 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:B_SourceLightType
2025-08-03 10:49:48.457 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,A_SourceLightType
2025-08-03 10:49:48.457 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,B_SourceLightType
2025-08-03 10:49:48.632 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;11/266,
2025-08-03 10:49:48.641 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:48.687 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:48.917 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:48.920 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_11_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:49.023 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 12
2025-08-03 10:49:49.023 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 12
2025-08-03 10:49:49.023 [Thd =57]  Info Default  开始扫描条带； [12/266]
2025-08-03 10:49:49.038 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:49:49.040 [Thd =35]  Info Default CaptureBeginX: 70.92450, CaptureBeginY:53.43003, CaptureEndX:-70.96496, CaptureEndY:53.43003, VectorBeginX:72.48939, VectorBeginY:53.43003, VectorEndX:-72.92145, VectorEndY:53.43003, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:49:49.040 [Thd =35]  Info Default ***row:12, vectorBeginX:72.489, vectorBeginY:53.430, captureBeginX:70.924, captureBeginY:53.430, captureEndX:-70.965, captureEndY:53.430, vectorEndX:-72.921, vectorEndY:53.430
2025-08-03 10:49:49.041 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:49.042 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9244978185474,EndPoint:70.9649583268361
2025-08-03 10:49:49.393 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:49.396 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_11_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:53.949 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:12
2025-08-03 10:49:53.949 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:53.949 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:53.952 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:12
2025-08-03 10:49:53.952 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:53.952 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:A_SourceLightType
2025-08-03 10:49:53.952 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:B_SourceLightType
2025-08-03 10:49:53.952 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,A_SourceLightType
2025-08-03 10:49:53.952 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,B_SourceLightType
2025-08-03 10:49:54.130 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;12/266,
2025-08-03 10:49:54.139 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:54.193 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:54.416 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:54.426 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_12_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:54.528 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 13
2025-08-03 10:49:54.528 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 13
2025-08-03 10:49:54.528 [Thd =53]  Info Default  开始扫描条带； [13/266]
2025-08-03 10:49:54.537 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:49:54.540 [Thd =35]  Info Default ***row:13, vectorBeginX:-72.921, vectorBeginY:53.002, captureBeginX:-71.302, captureBeginY:53.002, captureEndX:70.587, captureEndY:53.002, vectorEndX:72.489, vectorEndY:53.002
2025-08-03 10:49:54.540 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:49:54.542 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3023636192854,EndPoint:-70.587092526098
2025-08-03 10:49:54.898 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:49:54.901 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_12_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:49:55.795 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:49:55
2025-08-03 10:49:55.807 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:49:55
2025-08-03 10:49:59.449 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:13
2025-08-03 10:49:59.449 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:59.449 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:49:59.451 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:13
2025-08-03 10:49:59.451 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:49:59.451 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:A_SourceLightType
2025-08-03 10:49:59.451 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:B_SourceLightType
2025-08-03 10:49:59.451 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,A_SourceLightType
2025-08-03 10:49:59.452 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,B_SourceLightType
2025-08-03 10:49:59.620 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;13/266,
2025-08-03 10:49:59.628 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:49:59.675 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:49:59.934 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:49:59.937 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_13_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:00.029 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 14
2025-08-03 10:50:00.029 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 14
2025-08-03 10:50:00.029 [Thd =66]  Info Default  开始扫描条带； [14/266]
2025-08-03 10:50:00.043 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:50:00.045 [Thd =35]  Info Default CaptureBeginX: 70.92453, CaptureBeginY:52.57341, CaptureEndX:-70.96492, CaptureEndY:52.57341, VectorBeginX:72.48942, VectorBeginY:52.57341, VectorEndX:-72.92141, VectorEndY:52.57341, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:50:00.045 [Thd =35]  Info Default ***row:14, vectorBeginX:72.489, vectorBeginY:52.573, captureBeginX:70.925, captureBeginY:52.573, captureEndX:-70.965, captureEndY:52.573, vectorEndX:-72.921, vectorEndY:52.573
2025-08-03 10:50:00.045 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:50:00.048 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9245331436324,EndPoint:70.964923001751
2025-08-03 10:50:00.442 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:50:00.445 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_13_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:00.786 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:50:00
2025-08-03 10:50:00.809 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:50:00
2025-08-03 10:50:04.585 [Thd =72]  Info Default RecordCompleteStripNo begin:2025-08-03 10:50:04
2025-08-03 10:50:04.607 [Thd =72]  Info Default RecordCompleteStripNo end:2025-08-03 10:50:04
2025-08-03 10:50:04.951 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:14
2025-08-03 10:50:04.951 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:04.951 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:50:04.953 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:14
2025-08-03 10:50:04.953 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:04.953 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:A_SourceLightType
2025-08-03 10:50:04.953 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:B_SourceLightType
2025-08-03 10:50:04.953 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,A_SourceLightType
2025-08-03 10:50:04.954 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,B_SourceLightType
2025-08-03 10:50:05.125 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;14/266,
2025-08-03 10:50:05.135 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:50:05.273 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:50:05.441 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:50:05.443 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_14_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:05.623 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 15
2025-08-03 10:50:05.623 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 15
2025-08-03 10:50:05.623 [Thd =62]  Info Default  开始扫描条带； [15/266]
2025-08-03 10:50:05.632 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:50:05.634 [Thd =35]  Info Default ***row:15, vectorBeginX:-72.921, vectorBeginY:52.145, captureBeginX:-71.302, captureBeginY:52.145, captureEndX:70.587, captureEndY:52.145, vectorEndX:72.489, vectorEndY:52.145
2025-08-03 10:50:05.634 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:50:05.636 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3023282942004,EndPoint:-70.5871278511831
2025-08-03 10:50:05.979 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:50:05.981 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_14_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:10.547 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:15
2025-08-03 10:50:10.548 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:10.548 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:50:10.551 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:15
2025-08-03 10:50:10.552 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:10.552 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:A_SourceLightType
2025-08-03 10:50:10.552 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,A_SourceLightType
2025-08-03 10:50:10.558 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,B_SourceLightType
2025-08-03 10:50:10.558 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:B_SourceLightType
2025-08-03 10:50:10.738 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;15/266,
2025-08-03 10:50:10.814 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:50:11.145 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:50:11.218 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:50:11.220 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_15_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:11.486 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 16
2025-08-03 10:50:11.486 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 16
2025-08-03 10:50:11.486 [Thd =78]  Info Default  开始扫描条带； [16/266]
2025-08-03 10:50:11.501 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:50:11.508 [Thd =35]  Info Default CaptureBeginX: 70.92457, CaptureBeginY:51.71679, CaptureEndX:-70.96489, CaptureEndY:51.71679, VectorBeginX:72.48946, VectorBeginY:51.71679, VectorEndX:-72.92138, VectorEndY:51.71679, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:50:11.508 [Thd =35]  Info Default ***row:16, vectorBeginX:72.489, vectorBeginY:51.717, captureBeginX:70.925, captureBeginY:51.717, captureEndX:-70.965, captureEndY:51.717, vectorEndX:-72.921, vectorEndY:51.717
2025-08-03 10:50:11.509 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:50:11.511 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9245684687174,EndPoint:70.964887676666
2025-08-03 10:50:12.331 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:50:12.360 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_15_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:16.453 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:16
2025-08-03 10:50:16.453 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:16.453 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:50:16.678 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;16/266,
2025-08-03 10:50:17.935 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:16
2025-08-03 10:50:17.936 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:17.936 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:A_SourceLightType
2025-08-03 10:50:17.936 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:B_SourceLightType
2025-08-03 10:50:17.937 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,A_SourceLightType
2025-08-03 10:50:17.937 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,B_SourceLightType
2025-08-03 10:50:17.948 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:50:18.239 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:50:18.592 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 17
2025-08-03 10:50:18.592 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 17
2025-08-03 10:50:18.592 [Thd =65]  Info Default  开始扫描条带； [17/266]
2025-08-03 10:50:18.601 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:50:18.611 [Thd =35]  Info Default ***row:17, vectorBeginX:-72.921, vectorBeginY:51.288, captureBeginX:-71.302, captureBeginY:51.288, captureEndX:70.587, captureEndY:51.288, vectorEndX:72.489, vectorEndY:51.288
2025-08-03 10:50:18.612 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:50:18.652 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3022929691153,EndPoint:-70.5871631762681
2025-08-03 10:50:18.907 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:50:18.930 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_16_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:21.439 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:50:21.473 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_16_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:23.960 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;17/266,
2025-08-03 10:50:24.809 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:17
2025-08-03 10:50:24.810 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:24.810 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:50:24.812 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:17
2025-08-03 10:50:24.812 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:24.812 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:A_SourceLightType
2025-08-03 10:50:24.812 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,A_SourceLightType
2025-08-03 10:50:24.812 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,B_SourceLightType
2025-08-03 10:50:24.813 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:B_SourceLightType
2025-08-03 10:50:24.821 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:50:26.293 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:50:26.320 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_17_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:26.672 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:50:27.113 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 18
2025-08-03 10:50:27.113 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 18
2025-08-03 10:50:27.113 [Thd =100]  Info Default  开始扫描条带； [18/266]
2025-08-03 10:50:27.147 [Thd =35]  Info Default ScanDirection is Positive
2025-08-03 10:50:27.149 [Thd =35]  Info Default CaptureBeginX: 70.92460, CaptureBeginY:50.86016, CaptureEndX:-70.96485, CaptureEndY:50.86016, VectorBeginX:72.48949, VectorBeginY:50.86016, VectorEndX:-72.92134, VectorEndY:50.86016, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:50:27.150 [Thd =35]  Info Default ***row:18, vectorBeginX:72.489, vectorBeginY:50.860, captureBeginX:70.925, captureBeginY:50.860, captureEndX:-70.965, captureEndY:50.860, vectorEndX:-72.921, vectorEndY:50.860
2025-08-03 10:50:27.150 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:50:27.152 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9246037938025,EndPoint:70.964852351581
2025-08-03 10:50:27.666 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:50:27.684 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_17_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:32.290 [Thd =35]  Info Default Strip scanning complete, waiting for collection... ;18/266,
2025-08-03 10:50:32.520 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:18
2025-08-03 10:50:32.521 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:32.521 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:50:32.639 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:18
2025-08-03 10:50:32.639 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:32.640 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:B_SourceLightType
2025-08-03 10:50:32.640 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:A_SourceLightType
2025-08-03 10:50:32.640 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,B_SourceLightType
2025-08-03 10:50:32.640 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,A_SourceLightType
2025-08-03 10:50:32.649 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:50:33.389 [Thd =35]  Info Default singleAixsScan Testing 2
2025-08-03 10:50:33.473 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:50:33.476 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_18_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:33.761 [Thd =35]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 19
2025-08-03 10:50:33.761 [Thd =35]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 19
2025-08-03 10:50:33.762 [Thd =53]  Info Default  开始扫描条带； [19/266]
2025-08-03 10:50:33.772 [Thd =35]  Info Default ScanDirection is Negative
2025-08-03 10:50:33.775 [Thd =35]  Info Default ***row:19, vectorBeginX:-72.921, vectorBeginY:50.432, captureBeginX:-71.302, captureBeginY:50.432, captureEndX:70.587, captureEndY:50.432, vectorEndX:72.490, vectorEndY:50.432
2025-08-03 10:50:33.775 [Thd =35]  Info Default m_focusMapMode：0
2025-08-03 10:50:33.786 [Thd =35]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3022576440303,EndPoint:-70.5871985013531
2025-08-03 10:50:34.772 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:50:34.776 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_18_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:50:38.126 [Thd =78]  Warn Default Defects exceed the Set Value(5000),Inspection Stops Automatically!
2025-08-03 10:50:38.154 [Thd =5]  Info Default InspectProxy.Stop, InspectRuntimeInfo Thread health：
No memory resources：0001-01-01 00:00:00 
Excessive striping：0001-01-01 00:00:00 
 
Camera capture：
Camera capture received：2025-08-03 10:50:38 
no received resource：0001-01-01 00:00:00 
 
result handles thread health：
Result processing time：2025-08-03 10:50:38 
The number of images processed：73532/1424142 
 
algorithm returns ：
MCU returns time：2025-08-03 10:50:38 
MCUSDK ReceiveCount：4434 
Effect return time：0001-01-01 00:00:00 
 return time：2025-08-03 10:50:38 
return count：4431 
max begin_pos：89126 
real_batch sum：87423 
 
ThreadPool：
Runing：205 , Available：176 ,I/O：200 

2025-08-03 10:50:38.155 [Thd =5]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Stopping
2025-08-03 10:50:38.162 [Thd =5]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:50:38.164 [Thd =5]  Info Default SetSystemStatus Success
2025-08-03 10:50:38.164 [Thd =5]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Stopping
2025-08-03 10:50:38.166 [Thd =5]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Stopping
2025-08-03 10:50:38.168 [Thd =5]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:50:38.169 [Thd =5]  Info Default SetSystemStatus Success
2025-08-03 10:50:38.169 [Thd =5]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Stopping
2025-08-03 10:50:38.210 [Thd =78]  Info Default Chuck vacuum close
2025-08-03 10:50:38.274 [Thd =5]  Info Default AutoWorkerHelper.Stop() Abort() Complate 
2025-08-03 10:50:38.739 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:19
2025-08-03 10:50:38.739 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:50:38.743 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:50:38.976 [Thd =35]  Error SnakeScanLine failed. {0} System.Exception: VectorA error,msg:正在中止线程。
   在 Plugins.WaferStage.Standard.ACS.StandardMotionStage.VectorA(PointD point) 位置 E:\software\Go-Agent-21.4.0\pipelines\Plugin4.0\WaferStage Plugins\Plugin.WaferStage.Standard.ACS\Product4ACS\StandardMotionStage.cs:行号 188
   在 Plugins.WaferStage.Standard.ACS.StandardACS.VectorA(PointD point) 位置 E:\software\Go-Agent-21.4.0\pipelines\Plugin4.0\WaferStage Plugins\Plugin.WaferStage.Standard.ACS\StandardACS.cs:行号 1405
   在 Storm.Defect.AutoWorkerHelper.SnakeScanLine() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\Storm.Common\Defect\Worker\AutoWorkerHelper.cs:行号 1643
2025-08-03 10:50:39.497 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 10:50:39.497 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:2955
2025-08-03 10:50:39.497 [Thd =35]  Info Default ***********Task finished.**************
2025-08-03 10:50:39.498 [Thd =35]  Info Default Stop the detection thread;
2025-08-03 10:50:39.499 [Thd =39]  Info Default Chuck vacuum close
2025-08-03 10:50:39.557 [Thd =90]  Warn Default 还原光源最大功率
2025-08-03 10:50:39.563 [Thd =74]  Info Default LaserLamp MaxPower:300
2025-08-03 10:50:40.498 [Thd =62]  Info MMSFocus _isStop = true 
2025-08-03 10:50:40.504 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 10:50:40.504 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopping ! CurTaskName:2955
2025-08-03 10:50:40.564 [Thd =74]  Info Default OpenLamp Transmission
2025-08-03 10:50:41.367 [Thd =65]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:50:41.567 [Thd =74]  Info Default CloseLamp Reflection
2025-08-03 10:50:42.400 [Thd =42]  Info Default 结果处理全部完成！
2025-08-03 10:50:42.400 [Thd =72]  Info Default InspectProxy.OnRuntimeState_Hanele() TowerBuzzerCommand Close! RuntimeState:Stopped
2025-08-03 10:50:42.408 [Thd =72]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Close! RuntimeState:Stopped
2025-08-03 10:50:42.409 [Thd =72]  Info Default SetSystemStatus:WR DM0 1

2025-08-03 10:50:42.410 [Thd =72]  Info Default SetSystemStatus Success
2025-08-03 10:50:42.416 [Thd =86]  Info Default Chuck vacuum close
2025-08-03 10:50:42.588 [Thd =87]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:50:43.417 [Thd =1]  Info Default ChuckVac: :False
2025-08-03 10:50:43.417 [Thd =1]  Info Default UCVerify.InspectProxy_JobStateChangedEvent() Stopped! CurTaskName:2955
2025-08-03 10:50:43.417 [Thd =65]  Info Default Inspection Stop!
2025-08-03 10:50:43.563 [Thd =62]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:50:43.563 [Thd =64]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:50:44.088 [Thd =87]  Error Default SyncSend recv cmd timeout
2025-08-03 10:50:44.229 [Thd =1]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:50:44.636 [Thd =72]  Info Default AutoWorkerHelper::ResultHandling: Inspection task is completed, Result handing thread is shuted down.
2025-08-03 10:50:44.636 [Thd =72]  Info Default *********Reset2**********
2025-08-03 10:50:44.636 [Thd =85]  Info Default 检测完成！
2025-08-03 10:50:44.636 [Thd =89]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 10:50:45.565 [Thd =62]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:50:45.565 [Thd =74]  Info Default 聚焦Track已关闭
2025-08-03 10:50:47.570 [Thd =1]  Info Default VerifyModule.StopInspect() Stop !
2025-08-03 10:50:47.580 [Thd =1]  Info Default InspectProxy.Stop, InspectRuntimeInfo Thread health：
No memory resources：0001-01-01 00:00:00 
Excessive striping：0001-01-01 00:00:00 
 
Camera capture：
Camera capture received：2025-08-03 10:50:38 
no received resource：0001-01-01 00:00:00 
 
result handles thread health：
Result processing time：2025-08-03 10:50:38 
The number of images processed：74235/1424142 
 
algorithm returns ：
MCU returns time：2025-08-03 10:50:44 
MCUSDK ReceiveCount：4726 
Effect return time：2025-08-03 10:50:44 
 return time：2025-08-03 10:50:42 
return count：4596 
max begin_pos：96692 
real_batch sum：90666 
 
ThreadPool：
Runing：205 , Available：187 ,I/O：200 

2025-08-03 10:50:50.432 [Thd =5]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:50:50.432 [Thd =5]  Info Default Stop End!
2025-08-03 10:50:50.432 [Thd =5]  Info Default release timer --begin
2025-08-03 10:50:51.433 [Thd =5]  Info Default release timer --end
2025-08-03 10:50:51.433 [Thd =75]  Warn Default 还原光源最大功率
2025-08-03 10:50:51.433 [Thd =41]  Info Default LaserLamp MaxPower:300
2025-08-03 10:50:51.569 [Thd =78]  Info MMSFocus _isStop = true 
2025-08-03 10:50:51.577 [Thd =76]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:50:51.577 [Thd =76]  Error Default InitializeService: : ChangeLightPath to Area error
2025-08-03 10:50:51.577 [Thd =35]  Info Default Finally Over！
2025-08-03 10:50:51.578 [Thd =35]  Error Default AutoWorkerHelpe:AutoInspecting: Scanning thread error!System.Threading.ThreadAbortException: 正在中止线程。
   在 Storm.Defect.AutoWorkerHelper.SnakeScanLine() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\Storm.Common\Defect\Worker\AutoWorkerHelper.cs:行号 1791
   在 Storm.Defect.AutoWorkerHelper.AutoInspecting() 位置 E:\software\Go-Agent-21.4.0\pipelines\Storm_3.5_Build\Storm.Common\Defect\Worker\AutoWorkerHelper.cs:行号 812
2025-08-03 10:50:52.434 [Thd =41]  Info Default OpenLamp Transmission
2025-08-03 10:50:53.237 [Thd =51]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:50:53.425 [Thd =1]  Info Default DefectPicID:ac14dc7e-1347-477c-ad5b-fcc16df2d9cf
2025-08-03 10:50:54.170 [Thd =89]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 10:50:54.597 [Thd =78]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:50:54.597 [Thd =85]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:50:56.048 [Thd =41]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:50:56.048 [Thd =41]  Info Default CloseLamp Reflection
2025-08-03 10:50:56.598 [Thd =78]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:50:56.598 [Thd =80]  Info Default 聚焦Track已关闭
2025-08-03 10:51:03.443 [Thd =86]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:51:03.443 [Thd =86]  Error Default InitializeService: : ChangeLightPath to Area error
2025-08-03 10:51:13.833 [Thd =1]  Info Default DefectPicID:09e079c5-5cd5-42f3-a6a0-380533d83ef4
2025-08-03 10:51:14.906 [Thd =1]  Info Default DefectPicID:23dd6bd7-f16b-4fd2-ab91-ceafb1d59731
2025-08-03 10:51:17.337 [Thd =1]  Info Default DefectPicID:6c459e8b-754d-4747-a90d-7d76a265c077
2025-08-03 10:51:18.145 [Thd =1]  Info Default DefectPicID:e33be92c-99b0-45f0-a319-6c9ee2a4d55a
2025-08-03 10:51:20.088 [Thd =1]  Info Default DefectPicID:5c4067d2-0d27-44dc-90c2-1e5cc181c6d4
2025-08-03 10:51:28.280 [Thd =1]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:btnXYCalib_Click Before Memory usage:14270.46MB VirtualMemorySize:150.6 GB
2025-08-03 10:51:28.443 [Thd =93]  Info Default 设置RTB 标定环境中,请等待 ......
2025-08-03 10:51:28.443 [Thd =89]  Info Default AutoLightInit******************DemarcatePoints Count:1
2025-08-03 10:51:28.446 [Thd =89]  Info Default SetDistortionPara disaabled
2025-08-03 10:51:28.602 [Thd =89]  Info MMSFocus _isStop = true 
2025-08-03 10:51:28.603 [Thd =89]  Info Default aSwitchIndex index:0
2025-08-03 10:51:28.603 [Thd =89]  Info Default lens from ATF:
2025-08-03 10:51:28.603 [Thd =89]  Info Default objCount:3
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:P200;objId:0
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:P140;objId:1
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:P100;objId:2
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:;objId:0
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:;objId:0
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:;objId:0
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:;objId:0
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:;objId:0
2025-08-03 10:51:28.603 [Thd =89]  Info Default lens from system settings:
2025-08-03 10:51:28.603 [Thd =89]  Info Default systemlensettings lens count:3
2025-08-03 10:51:28.603 [Thd =89]  Info Default ratio:P200;objId:0
2025-08-03 10:51:28.604 [Thd =89]  Info Default ratio:P140;objId:1
2025-08-03 10:51:28.604 [Thd =89]  Info Default ratio:P100;objId:2
2025-08-03 10:51:28.606 [Thd =89]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:51:28.637 [Thd =89]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:51:28.640 [Thd =89]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:51:28.640 [Thd =89]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:51:28.641 [Thd =89]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:51:28.641 [Thd =89]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:51:28.641 [Thd =89]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:51:28.641 [Thd =89]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:51:28.641 [Thd =89]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:51:28.641 [Thd =89]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110261102065,StepStep:0.431711142934647,CosValueY:1,SinValueY:0
2025-08-03 10:51:28.641 [Thd =89]  Info Default deltax_stage 25.099032030506, deltay_stage:0.
2025-08-03 10:51:28.641 [Thd =89]  Info Default MoveStageForMarkCol101 point (62.0644223020295, 47.6873991966976), GDS ref(5500000, 138400000), gdsObject(30599000, 138400000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:51:28.641 [Thd =89]  Info Default deltax_stage 0, deltay_stage:-117.694100921343.
2025-08-03 10:51:28.641 [Thd =89]  Info Default MoveStageForMarkCol102 point (-55.6296786193139, 47.6873991966976), GDS ref(30599000, 138400000), gdsObject(30599000, 20706000), stageRef(62.0644223020295, 47.6873991966976).
2025-08-03 10:51:28.641 [Thd =89]  Info Default located_pos:(-55.6296786193139, 47.6873991966976)
2025-08-03 10:51:44.863 [Thd =89]  Info strip vectorBegin:(-52.970196,47.538081),VectorEnd:(-58.275527,47.538081),CaptureBegin:(-54.970196,47.538081)，CaptureEnd：(-56.275527,47.538081),StepScan:0.435110261102065
2025-08-03 10:51:44.863 [Thd =89]  Info Default VectorBegin:(-52.9701964532119,47.5380810086976)
2025-08-03 10:51:46.095 [Thd =65]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:51:46.095 [Thd =89]  Info Default SetMaxPower:300
2025-08-03 10:51:47.096 [Thd =58]  Info Default 打开光源，亮度：45%
2025-08-03 10:51:47.096 [Thd =87]  Info Default OpenLamp Transmission
2025-08-03 10:51:47.124 [Thd =93]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:51:47.900 [Thd =41]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:51:48.625 [Thd =93]  Error Default SyncSend recv cmd timeout
2025-08-03 10:51:49.097 [Thd =89]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:51:49.097 [Thd =75]  Info Default 聚焦Track已关闭
2025-08-03 10:51:50.711 [Thd =87]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:51:50.711 [Thd =87]  Info Default OpenLamp Reflection
2025-08-03 10:51:50.805 [Thd =89]  Info MMSFocus _isStop = true 
2025-08-03 10:51:52.310 [Thd =89]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:51:52.310 [Thd =86]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:51:52.517 [Thd =87]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:51:55.312 [Thd =89]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:51:55.312 [Thd =66]  Info Default 聚焦Track已开启
2025-08-03 10:51:59.106 [Thd =57]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:51:59.106 [Thd =57]  Info Default ChangeLightPath: False!
2025-08-03 10:51:59.106 [Thd =75]  Info Default RTB 标定中,请等待 ......
2025-08-03 10:51:59.106 [Thd =75]  Info Default CurrentSize:2048,2048
2025-08-03 10:51:59.106 [Thd =75]  Info Default Camera size no change
2025-08-03 10:51:59.106 [Thd =58]  Info Default CurrentSize:2048,2048
2025-08-03 10:51:59.107 [Thd =58]  Info Default Camera size no change
2025-08-03 10:51:59.108 [Thd =75]  Info Default Set camera size success
2025-08-03 10:51:59.108 [Thd =75]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:51:59.108 [Thd =58]  Info Default Set camera size success
2025-08-03 10:51:59.108 [Thd =58]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 10:52:00.558 [Thd =75]  Info Default Set camera parameter
2025-08-03 10:52:00.558 [Thd =75]  Info Default TriggerMode is On,dont set
2025-08-03 10:52:00.558 [Thd =75]  Info Default BUFFER_COUNT no change
2025-08-03 10:52:01.063 [Thd =58]  Info Default Set camera parameter
2025-08-03 10:52:01.063 [Thd =58]  Info Default TriggerMode is On,dont set
2025-08-03 10:52:01.063 [Thd =58]  Info Default BUFFER_COUNT no change
2025-08-03 10:52:01.070 [Thd =89]  Info Default SetDistortionPara disaabled
2025-08-03 10:52:01.070 [Thd =89]  Info Default scanStrips:1
2025-08-03 10:52:01.116 [Thd =89]  Info Default m_focusMapMode：0
2025-08-03 10:52:01.118 [Thd =89]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:54.9701964532119,EndPoint:56.2755272365181
2025-08-03 10:52:02.183 [Thd =89]  Info Default Get_Tolerance_and_Rounding:******Tolerance********
2025-08-03 10:52:04.884 [Thd =89]  Info Default Get_Tolerance_and_Rounding:-----------Tolerance-------------
2025-08-03 10:52:04.930 [Thd =46]  Warn Default 还原光源最大功率
2025-08-03 10:52:04.930 [Thd =86]  Info Default LaserLamp MaxPower:300
2025-08-03 10:52:05.931 [Thd =76]  Info Default OpenLamp Transmission
2025-08-03 10:52:06.320 [Thd =46]  Info MMSFocus _isStop = true 
2025-08-03 10:52:06.737 [Thd =51]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:52:07.738 [Thd =76]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:52:07.738 [Thd =76]  Info Default CloseLamp Reflection
2025-08-03 10:52:08.769 [Thd =87]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:52:08.829 [Thd =46]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:52:08.829 [Thd =66]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:52:10.270 [Thd =87]  Error Default SyncSend recv cmd timeout
2025-08-03 10:52:10.831 [Thd =46]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:52:10.831 [Thd =81]  Info Default 聚焦Track已关闭
2025-08-03 10:52:17.944 [Thd =93]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:52:22.510 [Thd =58]  Info Default 公差标定完成
2025-08-03 10:52:22.550 [Thd =86]  Info Default CurrentMenthod:ClassName:Module.Setups_Storm.SettingStep.UCCalibrationMethodName:<btnXYCalib_Click>b__28_1 Before Memory usage:13921.89MB VirtualMemorySize:150.5 GB
2025-08-03 10:52:36.527 [Thd =1]  Info Default Licensed has techLevel count:3
2025-08-03 10:52:36.646 [Thd =1]  Info Default MultiInspect:ContinueScanStrip:0
2025-08-03 10:52:36.647 [Thd =1]  Info Default ######################################Start inspect#################################################
2025-08-03 10:52:36.647 [Thd =58]  Info Default Start [1/1]
2025-08-03 10:52:36.648 [Thd =46]  Info Default 开始检查！
2025-08-03 10:52:36.950 [Thd =1]  Info Default Computed strip 0 Starting point GDS coordinates，StarPoint.X:19344666,146825192 ，GDSStep:2016，stripNo:0，PixelX_line:0.212456 
2025-08-03 10:52:36.950 [Thd =5]  Info Default 初始化插件
2025-08-03 10:52:36.950 [Thd =87]  Info Default CurrentSize:2048,2048
2025-08-03 10:52:36.950 [Thd =87]  Info Default Camera size no change
2025-08-03 10:52:36.950 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 10:52:36.951 [Thd =44]  Info Default CurrentSize:2048,2048
2025-08-03 10:52:36.951 [Thd =44]  Info Default Camera size no change
2025-08-03 10:52:36.951 [Thd =1]  Info Default CheckSkipAlignment Check that the alignment is valid! IsFinished:True
2025-08-03 10:52:36.951 [Thd =1]  Info Default UCVerify.AutoAlignment() RefLampRiseDown ! Rise
2025-08-03 10:52:36.951 [Thd =65]  Info Default 设置 TDI 相机参数...
2025-08-03 10:52:36.952 [Thd =87]  Info Default Set camera size success
2025-08-03 10:52:36.952 [Thd =87]  Info Default Current:TDIStage：TDI256，Target：TDI256
2025-08-03 10:52:36.952 [Thd =44]  Info Default Set camera size success
2025-08-03 10:52:36.952 [Thd =44]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:52:36.953 [Thd =68]  Info Default 初始化DB目录
2025-08-03 10:52:37.074 [Thd =1]  Info Default deltax_stage 13.8446836681006, deltay_stage:0.
2025-08-03 10:52:37.074 [Thd =1]  Info Default MoveStageForMarkCol101 point (62.0639581999743, 58.9417475686722), GDS ref(5500000, 138400000), gdsObject(19344666, 138400000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:52:37.074 [Thd =1]  Info Default deltax_stage 0, deltay_stage:8.42519922451183.
2025-08-03 10:52:37.074 [Thd =1]  Info Default MoveStageForMarkCol102 point (70.4891574244861, 58.9417475686722), GDS ref(19344666, 138400000), gdsObject(19344666, 146825192), stageRef(62.0639581999743, 58.9417475686722).
2025-08-03 10:52:37.074 [Thd =1]  Info Default located_pos:(70.4891574244861, 58.9417475686722)
2025-08-03 10:52:37.075 [Thd =1]  Info Default deltax_stage 0, deltay_stage:-124.400106671667.
2025-08-03 10:52:37.075 [Thd =1]  Info Default MoveStageForMarkCol102 point (-62.3367193928987, 72.7864312485445), GDS ref(5500000, 138400000), gdsObject(5500000, 14000000), stageRef(62.0633872787678, 72.7864312485445).
2025-08-03 10:52:37.075 [Thd =1]  Info Default located_pos:(-62.3367193928987, 72.7864312485445)
2025-08-03 10:52:37.075 [Thd =51]  Info Default 初始化DPU服务器！
2025-08-03 10:52:37.075 [Thd =58]  Info Default MCUHelper.ResetMcu(),Restart service！
2025-08-03 10:52:38.404 [Thd =87]  Info Default Set camera parameter
2025-08-03 10:52:38.404 [Thd =87]  Info Default TriggerMode is On,dont set
2025-08-03 10:52:38.404 [Thd =87]  Info Default BUFFER_COUNT no change
2025-08-03 10:52:38.908 [Thd =44]  Info Default Set camera parameter
2025-08-03 10:52:38.908 [Thd =44]  Info Default TriggerMode is On,dont set
2025-08-03 10:52:38.908 [Thd =44]  Info Default BUFFER_COUNT no change
2025-08-03 10:52:42.721 [Thd =1]  Info Default Mask_Recipe 100
2025-08-03 10:52:42.722 [Thd =1]  Info Default MaskScaleY:0.999999142511454
2025-08-03 10:52:42.722 [Thd =1]  Info Default MaskScaleX:0.999998723835009,Orth_Y_BeforR:0.141764346498991
2025-08-03 10:52:44.601 [Thd =58]  Info Default MCUHelper.ResetMcu(),All Dpus are restarted！
2025-08-03 10:52:44.631 [Thd =1]  Info Default Register inspect event！
2025-08-03 10:52:44.641 [Thd =1]  Info Default initial*****Light_intensity:45, min:10, max:220
2025-08-03 10:52:44.642 [Thd =1]  Info Default ***gds clip thread num is 6
2025-08-03 10:52:44.642 [Thd =1]  Info ********************corePlug version is {0} **************** 3.0SPC200
2025-08-03 10:52:44.642 [Thd =1]  Info Default Positioning parameters: the reference point GDS_X: 5500000, reference point GDS_Y: 14000000, reference point Stage_X: -62.3367193928987, reference point Stage_Y: 72.7864312485445, starting point GDS_X: 19344666, starting point GDS_Y: 146825192
2025-08-03 10:52:44.642 [Thd =51]  Info Default m_start_strip_no:0
2025-08-03 10:52:44.642 [Thd =51]  Info Default BINING TEST 0802 jMInspectPara.m_bin:1
2025-08-03 10:52:44.642 [Thd =87]  Info Default 初始化检测数据
2025-08-03 10:52:44.642 [Thd =51]  Info Default Parameters passed to Core SetDie2DBPara:{"m_gdsPath":"D:\\\\hes\\\\hes\\ConvertFiles\\6AC34B88F4E5C006781084A1C39D6D9C.oas","m_layerMode":0,"m_layerNo":9,"m_layerNo2":0,"m_bMirrorX":false,"m_org_img_width":2048,"m_width":520,"m_height":512,"m_pixelSizeX":0.212456,"m_pixelSizeY":0.212456,"m_pixelSizeX_Len":0.212456,"m_pixelSizeY_Len":0.212456,"m_gridlen":1,"m_channel":4,"m_overlay_width":28,"m_overlay_height":28,"m_OpticalSourceType":2,"m_Scale":1.0,"m_Rotate":0.0,"m_row":1062,"m_col":1341,"m_algV":2,"m_CDprecisionMode":0,"m_ParprecisionMode":1,"m_batchNum":20,"m_fillPath":null,"m_bCPUFill":false,"m_scanMode":0,"m_min_optical":10,"m_max_optical":220,"m_bAreaInspection":true,"m_beginX":19344666,"m_beginY":146825192,"m_endX":133034765,"m_endY":5595593,"m_noInspectArea":"","m_Resolution_Defect":1,"m_Combine_defect_distance":40,"m_grid_path":"c:/grid","m_bsave_grid":false,"m_inspect_OverlayX":16,"m_inspect_OverlayY":16,"m_mask_inspection_mode":0,"m_unpattern_mask_inspect_size":0,"m_left_thrd":0,"m_right_thrd":0,"FilterKernelNum":1,"m_gray_threshold":0,"iBlackOffset":0,"caliDustThd":0,"m_Resolution_IntSec_Defect":0,"m_GrayDiffThd":120,"m_PinholeThd":20,"m_IslandThd":20,"m_DefectAreaThrd":0.0,"m_rowColScan":1,"m_mask_pattern_mode_mask":3103,"m_AL":1,"m_lcol":1300,"m_tolerance_mode":0,"m_x_tolerance":-0.104,"m_y_tolerance":-0.104,"m_CD_Defect_resolution":0.2,"m_pinhole_Defect_resolution":0.2,"m_degreeThrd":44,"m_cornerThrd":2,"m_Lens_multiplex":24,"m_offsetX":0,"m_DefectCombine":1,"m_DPPath":"\\dp\\6232161-YXC\\data","m_bUseDP":true,"m_pyramid_factor":1,"m_gds_clip_thread_num":6,"m_total_strip":266,"m_strip_nos":null,"m_resultPath":"\\result\\MaskDefectImages\\2025-08-03\\rcp_DB_1/","m_line_camera_ud_offset":-3,"m_line_camera_lr_offset":0,"m_start_strip_no":0,"m_bin":1,"m_picPath":"\\result\\MaskAllImages\\2025-08-03\\rcp_DB_1/","m_optical_head_total":0,"m_inner_round":0.2,"m_optical_head_id":0,"m_outer_round":0.2,"m_compensate":0.0,"m_row_die":0,"m_adjust_org_img_width":0,"m_adjust_flag":0,"m_adjust_u0":0.0,"m_adjust_a":0.0,"m_adjust_b":0.0,"m_adjustLeft_shift":0,"m_adjustRight_shift":0,"m_rough_reg_gray_Thrd":0,"m_fine_reg_gray_Thrd":0,"m_DPU_correction":0,"m_pinhole_range":0,"die_count":0,"m_CNT_width":5.0,"m_CNT_thrd":20.0,"m_CD2_Defect_resolution":0.25,"m_DD_Alg":0,"m_LineThrd_minX":0,"m_LineThrd_minY":0,"m_LineThrd_maxX":0,"m_LineThrd_maxY":0,"m_turbo_alg":false,"m_PSM":false,"m_CellShift_real_physical_distance":0.0,"m_CellShift_subthrd_mask_mode":2,"m_DD_range_max":0,"m_DD_range_min":0,"m_DD_min_gay_diff":0,"m_DD_range_ra":0,"m_T_collect":[220,220,3,0,1130102784,1065353216,1065353216,0,-203,60838],"m_R_collect":[200,201,111,0,1128792064,1065353216,1065353216,-2147481856,-2035754264,541],"m_simple_gray_defect_sum_thrd_DD":30,"m_simple_gray_defect_DD":false,"m_die_phy_width":0.0,"m_die_phy_height":0.0,"m_die_cycle_phy_width":0.0,"m_die_cycle_phy_height":0.0,"m_normal_vector_level":1,"m_gray_diff_level":1,"m_edge_defect_level":2,"m_line_camera_ud_offset_f":-3.35,"m_mask_inspection_mode_ex":0,"m_CS_x_use":0,"m_CS_y_use":0,"m_CS_y_real_physical_distance":0.0,"m_CS_y_subthrd_mask_mode":2,"m_Edge_1_thrd_mode":2,"m_Edge_2_thrd_mode":2,"m_Gray_thrd_mode":2,"m_line_camera_lr_offset_f":-0.55,"SL_Edge_switch":2,"SL_Edge2_switch":0,"crDrop_switch":0,"TR_flag":2,"reflect_inspect_accurancy":2,"m_x_tolerance_R":-0.174,"m_y_tolerance_R":-0.186,"m_inner_round_R":0.55,"m_outer_round_R":0.15,"m_min_optical_R":90,"m_max_optical_R":200,"m_IsInverseCorlor":false,"ud_decimal_right":-3.85,"lr_decimal_right":-0.15,"m_simple_gray_defect_kernel":4,"m_cs_pitchs":null,"m_OPCplate":false}
2025-08-03 10:52:44.644 [Thd =51]  Info Default m_line_camera_cols:325
2025-08-03 10:52:44.644 [Thd =51]  Info Default AllocHGlobal img mem pic_count:325, img_w:2032, img_h:2048
2025-08-03 10:52:44.644 [Thd =51]  Info Default Set distortion correction parameters Star,org_img_width:2048,MaskInspectMode:Pattern
2025-08-03 10:52:44.647 [Thd =51]  Info Default SetDistortionPara disaabled
2025-08-03 10:52:44.648 [Thd =51]  Info Default Set distortion correction parameters End
2025-08-03 10:52:44.648 [Thd =51]  Info Default  InitDie2DBRes Argument： width:520, height:2048, strip_sum(Grid.Rows):1062,pic_count(Grid2.Cols):1300,pic_count_pack(Grid.Cols):1341,max_batch:20,mode:0,m_channel:4 
2025-08-03 10:52:45.032 [Thd =51]  Info Default InitDie2DBRes Success!!!!
2025-08-03 10:52:45.033 [Thd =1]  Info Default Successful alignment！
2025-08-03 10:52:45.034 [Thd =57]  Info Default 对准完成！
2025-08-03 10:52:45.034 [Thd =65]  Info Default 注册相机取图
2025-08-03 10:52:45.034 [Thd =58]  Info Default 稍等！设置相机参数中
2025-08-03 10:52:45.035 [Thd =5]  Info Default 移动到起始点位
2025-08-03 10:52:45.565 [Thd =46]  Info MMSFocus _isStop = true 
2025-08-03 10:52:45.769 [Thd =46]  Info Default StagePixelSizeY:0.212456,PrepareDistanceScan:2,StepScan:0.435110261102065,StepStep:0.431711142934647,CosValueY:1,SinValueY:0
2025-08-03 10:52:45.769 [Thd =51]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:52:45.770 [Thd =46]  Info Default SetMaxPower:300
2025-08-03 10:52:46.771 [Thd =5]  Info Default 打开光源，亮度：45%
2025-08-03 10:52:46.771 [Thd =87]  Info Default OpenLamp Transmission
2025-08-03 10:52:46.801 [Thd =51]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:52:47.575 [Thd =57]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:52:48.301 [Thd =51]  Error Default SyncSend recv cmd timeout
2025-08-03 10:52:48.771 [Thd =65]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:52:48.771 [Thd =57]  Info Default 聚焦Track已关闭
2025-08-03 10:52:50.074 [Thd =65]  Info MMSFocus _isStop = true 
2025-08-03 10:52:50.385 [Thd =87]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:52:50.385 [Thd =87]  Info Default OpenLamp Reflection
2025-08-03 10:52:51.578 [Thd =65]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:52:51.578 [Thd =66]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:52:52.190 [Thd =87]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:52:53.580 [Thd =65]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:52:53.580 [Thd =57]  Info Default 聚焦Track已开启
2025-08-03 10:52:58.781 [Thd =44]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:52:58.781 [Thd =44]  Info Default ChangeLightPath: False!
2025-08-03 10:52:58.781 [Thd =87]  Info Default 执行MarkOffSet......
2025-08-03 10:52:58.781 [Thd =58]  Info Default CurrentSize:2048,2048
2025-08-03 10:52:58.781 [Thd =58]  Info Default Camera size no change
2025-08-03 10:52:58.781 [Thd =58]  Info Default Set camera size success
2025-08-03 10:52:58.782 [Thd =58]  Info Default Current:TDIStage：TDI192，Target：TDI192
2025-08-03 10:52:59.759 [Thd =58]  Info Default Set camera parameter
2025-08-03 10:52:59.760 [Thd =58]  Info Default TriggerMode is On,dont set
2025-08-03 10:52:59.760 [Thd =58]  Info Default BUFFER_COUNT no change
2025-08-03 10:52:59.763 [Thd =46]  Info strip vectorBegin:(59.471715,72.637113),VectorEnd:(64.777046,72.637113),CaptureBegin:(61.471715,72.637113)，CaptureEnd：(62.777046,72.637113),StepScan:0.435110261102065
2025-08-03 10:53:02.287 [Thd =46]  Info Default m_focusMapMode：0
2025-08-03 10:53:02.289 [Thd =46]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:-61.4717149415637,EndPoint:-62.7770457248699
2025-08-03 10:53:02.482 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 
2025-08-03 10:53:02.498 [Thd =31]  Info Default mage not received in scan state! Direct abandonment！cam_idx:0,Cur_strip_status:FinishOK 
2025-08-03 10:53:02.794 [Thd =31]  Info Default stormCore.MatchTemplate:0.8582629
2025-08-03 10:53:02.794 [Thd =65]  Warn Default Mark offset match score:0.85826
2025-08-03 10:53:03.784 [Thd =46]  Info MMSFocus _isStop = true 
2025-08-03 10:53:04.308 [Thd =68]  Warn Default 还原光源最大功率
2025-08-03 10:53:04.308 [Thd =46]  Info Default LaserLamp MaxPower:300
2025-08-03 10:53:05.310 [Thd =65]  Info Default OpenLamp Transmission
2025-08-03 10:53:05.310 [Thd =5]  Info MMSFocus _isStop = true 
2025-08-03 10:53:06.114 [Thd =68]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:53:07.117 [Thd =65]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:53:07.117 [Thd =65]  Info Default CloseLamp Reflection
2025-08-03 10:53:07.815 [Thd =5]  Info Default QuerySubstrateMode Area OK 
2025-08-03 10:53:07.815 [Thd =74]  Info Default 已切换到面阵聚焦模式
2025-08-03 10:53:08.143 [Thd =87]  Info Default LaserLamp MaxPower:300,currentPower:150
2025-08-03 10:53:09.644 [Thd =87]  Error Default SyncSend recv cmd timeout
2025-08-03 10:53:09.817 [Thd =5]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:53:09.817 [Thd =65]  Info Default 聚焦Track已关闭
2025-08-03 10:53:17.322 [Thd =57]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:53:18.065 [Thd =1]  Info Default Move to the inspect start point，Starting point coordinates：X:70.4891574244861,Y:58.9417475686722,OffSet.X:4,OffSet.Y:3
2025-08-03 10:53:18.065 [Thd =65]  Warn Default 标记偏移点X:4，Y:3
2025-08-03 10:53:20.187 [Thd =75]  Info Default Zposition:0
2025-08-03 10:53:22.238 [Thd =74]  Info Default Wait! Setting camera parameters 
2025-08-03 10:53:22.238 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 10:53:22.247 [Thd =1]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:53:22.248 [Thd =1]  Info Default SetSystemStatus Success
2025-08-03 10:53:22.248 [Thd =1]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 10:53:22.248 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() Running ! 
2025-08-03 10:53:22.248 [Thd =1]  Info Default AutoWorderHelper:StartWorker.
2025-08-03 10:53:22.249 [Thd =1]  Info Default AutoWorderHelper:SaveTask2DB.
2025-08-03 10:53:22.429 [Thd =1]  Info AutoWorkerHelper::SaveTask2DB() finished. Task={0} 2956
2025-08-03 10:53:22.429 [Thd =1]  Info Default AutoWorderHelper:InitInspectingData.
2025-08-03 10:53:22.430 [Thd =1]  Info Default AUtoWorkerHelper.StartWorker() SaveToDB Complate! iRet:0
2025-08-03 10:53:22.430 [Thd =5]  Info Default 检测线程启动！
2025-08-03 10:53:22.430 [Thd =90]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open! RuntimeState:Running
2025-08-03 10:53:22.431 [Thd =57]  Info Default 结果处理线程启动！
2025-08-03 10:53:22.432 [Thd =90]  Info Default SetSystemStatus:WR DM0 2

2025-08-03 10:53:22.433 [Thd =90]  Info Default SetSystemStatus Success
2025-08-03 10:53:22.433 [Thd =90]  Info Default InspectProxy.OnRuntimeState_Hanele() RuntimeLight Open End! RuntimeState:Running
2025-08-03 10:53:22.435 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2956
2025-08-03 10:53:22.435 [Thd =1]  Info Default UCVerify..InspectProxy_JobStateChangedEvent() Running! CurTaskName:2956
2025-08-03 10:53:22.710 [Thd =90]  Info MMSFocus _isStop = true 
2025-08-03 10:53:22.711 [Thd =90]  Info Default aSwitchIndex index:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default lens from ATF:
2025-08-03 10:53:22.711 [Thd =90]  Info Default objCount:3
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:P200;objId:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:P140;objId:1
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:P100;objId:2
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:;objId:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:;objId:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:;objId:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:;objId:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:;objId:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default lens from system settings:
2025-08-03 10:53:22.711 [Thd =90]  Info Default systemlensettings lens count:3
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:P200;objId:0
2025-08-03 10:53:22.711 [Thd =90]  Info Default ratio:P140;objId:1
2025-08-03 10:53:22.712 [Thd =90]  Info Default ratio:P100;objId:2
2025-08-03 10:53:22.714 [Thd =90]  Info AbstractMicroscope Switch Lens:Broadcast Event
2025-08-03 10:53:22.749 [Thd =90]  Info AbstractMicroscope Broadcast Event Finished
2025-08-03 10:53:22.749 [Thd =90]  Info Default defectData.RecivePicCount:0
2025-08-03 10:53:22.749 [Thd =90]  Info Default start inspect task pic_count of one strip:325, big_strip_count:266. 
2025-08-03 10:53:22.749 [Thd =90]  Info Default m_StagePixelSizeX=0.212456， m_StagePixelSizeY=0.212456.
2025-08-03 10:53:22.749 [Thd =90]  Info Default singleAixsScan Testing calibrationSetting.OffsetYAL:0
2025-08-03 10:53:22.750 [Thd =90]  Info Default offsetYAL Positive and negative sign rule: when XOY is greater than 90 degrees, the mask vertical orthogonal Angle is positive; When XOY is less than 90 degrees, the vertical orthogonal Angle of the mask is negative
2025-08-03 10:53:22.750 [Thd =90]  Info Default SinValueX: 0,CosValueX:1,SinValueY:0,CosValueY:1
2025-08-03 10:53:22.750 [Thd =90]  Info Default BaseScanObjectLine:------------------
2025-08-03 10:53:22.750 [Thd =90]  Info Default BaseScanObjectLine:*****************
2025-08-03 10:53:22.750 [Thd =90]  Info Default BaseScanObjectLine:0000000000000000
2025-08-03 10:53:22.750 [Thd =90]  Info Default scaleX: 0.999998723835009, scaleY:0.999999142511454
2025-08-03 10:53:22.750 [Thd =90]  Info Default Orth_Y_BeforR: 0.141764346498991,StageScaleX:0.999998723835009,Y:0.999999142511454
2025-08-03 10:53:22.750 [Thd =90]  Info Default LengthOfAccelerationAndDeceleration: 2
2025-08-03 10:53:24.752 [Thd =90]  Info Default SetFocusTrack CloseTrack OK 
2025-08-03 10:53:24.752 [Thd =51]  Info Default 正在切换线阵相机光路
2025-08-03 10:53:24.753 [Thd =5]  Info Default 聚焦Track已关闭
2025-08-03 10:53:36.767 [Thd =90]  Error Default ChangeLightPath: : Switch to area cam fault return:-1!
2025-08-03 10:53:36.767 [Thd =90]  Info Default ChangeLightPath: False!
2025-08-03 10:53:36.767 [Thd =90]  Info Default SnakeScanLine: Paddle Rotate angle is 0 !
2025-08-03 10:53:38.861 [Thd =90]  Info Default InspectOverlayX: 16, InspectOverlayY:16
2025-08-03 10:53:38.874 [Thd =57]  Warn Default 检测光源最大功率(mw):300mw
2025-08-03 10:53:38.874 [Thd =90]  Info Default SetMaxPower:300
2025-08-03 10:53:39.875 [Thd =66]  Info Default 正在打开透射、反射光源，亮度 45%
2025-08-03 10:53:39.875 [Thd =90]  Info Default OpenLamp Transmission
2025-08-03 10:53:40.678 [Thd =58]  Info Default PolarizationBaffleControl True: 3!
2025-08-03 10:53:43.489 [Thd =90]  Error Default Transmission: : Perspec Light unlock fault!
2025-08-03 10:53:43.489 [Thd =90]  Info Default OpenLamp Reflection
2025-08-03 10:53:44.528 [Thd =87]  Info Default LaserLamp MaxPower:300,currentPower:135
2025-08-03 10:53:45.297 [Thd =90]  Info Default PolarizationBaffleControl False: 2!
2025-08-03 10:53:45.297 [Thd =5]  Info Default 正在启用实时聚焦
2025-08-03 10:53:45.730 [Thd =90]  Info MMSFocus _isStop = true 
2025-08-03 10:53:46.029 [Thd =87]  Error Default SyncSend recv cmd timeout
2025-08-03 10:53:48.236 [Thd =90]  Info Default QuerySubstrateMode Line OK 
2025-08-03 10:53:48.236 [Thd =65]  Info Default 已切换到线阵聚焦模式
2025-08-03 10:53:49.239 [Thd =87]  Info Default 正在设置扫描控制参数
2025-08-03 10:53:49.239 [Thd =90]  Info Default GetParameter: stepCompX is 0.000212456182178743
2025-08-03 10:53:50.043 [Thd =90]  Info Default Allocate resources!
2025-08-03 10:53:50.043 [Thd =90]  Info Default GPU num is 2!
2025-08-03 10:53:52.044 [Thd =90]  Info Default SetFocusTrack OpenTrack OK 
2025-08-03 10:53:52.044 [Thd =90]  Info Default Start scanning; Start strip number: 0, total strip number: 266
2025-08-03 10:53:52.044 [Thd =74]  Info Default 聚焦Track已开启
2025-08-03 10:53:52.045 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 0
2025-08-03 10:53:52.045 [Thd =5]  Info Default  开始扫描条带； [0/266]
2025-08-03 10:53:52.054 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:53:52.057 [Thd =90]  Info Default CaptureBeginX: 70.92450, CaptureBeginY:58.56978, CaptureEndX:-70.96496, CaptureEndY:58.56978, VectorBeginX:72.48939, VectorBeginY:58.56978, VectorEndX:-72.92145, VectorEndY:58.56978, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:53:52.057 [Thd =90]  Info Default ***row:0, vectorBeginX:72.489, vectorBeginY:58.570, captureBeginX:70.924, captureBeginY:58.570, captureEndX:-70.965, captureEndY:58.570, vectorEndX:-72.921, vectorEndY:58.570
2025-08-03 10:53:52.057 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:53:52.058 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9244983240371,EndPoint:70.9649578213463
2025-08-03 10:53:56.963 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:0
2025-08-03 10:53:56.963 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:53:56.963 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:53:56.966 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:0
2025-08-03 10:53:56.966 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:0,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:53:56.966 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:A_SourceLightType
2025-08-03 10:53:56.966 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:0,source_light_Type:B_SourceLightType
2025-08-03 10:53:56.967 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,A_SourceLightType
2025-08-03 10:53:56.967 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：0,B_SourceLightType
2025-08-03 10:53:57.134 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;0/266,
2025-08-03 10:53:57.144 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:53:57.188 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:53:57.422 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:53:57.436 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_0_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:53:57.533 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 1
2025-08-03 10:53:57.533 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 1
2025-08-03 10:53:57.533 [Thd =87]  Info Default  开始扫描条带； [1/266]
2025-08-03 10:53:57.550 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:53:57.553 [Thd =90]  Info Default ***row:1, vectorBeginX:-72.921, vectorBeginY:58.141, captureBeginX:-71.302, captureBeginY:58.141, captureEndX:70.587, captureEndY:58.141, vectorEndX:72.489, vectorEndY:58.141
2025-08-03 10:53:57.553 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:53:57.555 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3023631137956,EndPoint:-70.5870930315878
2025-08-03 10:53:57.898 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:53:57.901 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":0,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_0_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:02.462 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:1
2025-08-03 10:54:02.462 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:02.462 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:02.464 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:1
2025-08-03 10:54:02.464 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:1,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:02.465 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:A_SourceLightType
2025-08-03 10:54:02.465 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:1,source_light_Type:B_SourceLightType
2025-08-03 10:54:02.465 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,A_SourceLightType
2025-08-03 10:54:02.465 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：1,B_SourceLightType
2025-08-03 10:54:02.651 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;1/266,
2025-08-03 10:54:02.660 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:02.771 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:02.914 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:02.930 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_1_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:03.108 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 2
2025-08-03 10:54:03.108 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 2
2025-08-03 10:54:03.108 [Thd =51]  Info Default  开始扫描条带； [2/266]
2025-08-03 10:54:03.118 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:54:03.121 [Thd =90]  Info Default CaptureBeginX: 70.92453, CaptureBeginY:57.71315, CaptureEndX:-70.96492, CaptureEndY:57.71315, VectorBeginX:72.48942, VectorBeginY:57.71315, VectorEndX:-72.92141, VectorEndY:57.71315, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:54:03.121 [Thd =90]  Info Default ***row:2, vectorBeginX:72.489, vectorBeginY:57.713, captureBeginX:70.925, captureBeginY:57.713, captureEndX:-70.965, captureEndY:57.713, vectorEndX:-72.921, vectorEndY:57.713
2025-08-03 10:54:03.121 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:03.122 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9245336491222,EndPoint:70.9649224962613
2025-08-03 10:54:03.390 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:03.392 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":1,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_1_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:08.026 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:2
2025-08-03 10:54:08.026 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:08.026 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:08.028 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:2
2025-08-03 10:54:08.029 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:2,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:08.029 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:A_SourceLightType
2025-08-03 10:54:08.029 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:2,source_light_Type:B_SourceLightType
2025-08-03 10:54:08.029 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,A_SourceLightType
2025-08-03 10:54:08.029 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：2,B_SourceLightType
2025-08-03 10:54:08.204 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;2/266,
2025-08-03 10:54:08.214 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:08.332 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:08.489 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:08.504 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_2_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:08.669 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 3
2025-08-03 10:54:08.669 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 3
2025-08-03 10:54:08.669 [Thd =46]  Info Default  开始扫描条带； [3/266]
2025-08-03 10:54:08.678 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:54:08.681 [Thd =90]  Info Default ***row:3, vectorBeginX:-72.921, vectorBeginY:57.285, captureBeginX:-71.302, captureBeginY:57.285, captureEndX:70.587, captureEndY:57.285, vectorEndX:72.489, vectorEndY:57.285
2025-08-03 10:54:08.681 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:08.683 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3023277887106,EndPoint:-70.5871283566728
2025-08-03 10:54:08.969 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:08.972 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":2,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_2_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:13.588 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:3
2025-08-03 10:54:13.589 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:13.589 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:13.590 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:3
2025-08-03 10:54:13.590 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:3,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:13.590 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:A_SourceLightType
2025-08-03 10:54:13.590 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:3,source_light_Type:B_SourceLightType
2025-08-03 10:54:13.591 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,A_SourceLightType
2025-08-03 10:54:13.591 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：3,B_SourceLightType
2025-08-03 10:54:13.758 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;3/266,
2025-08-03 10:54:13.767 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:13.830 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:14.068 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:14.098 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_3_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:14.166 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 4
2025-08-03 10:54:14.166 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 4
2025-08-03 10:54:14.166 [Thd =65]  Info Default  开始扫描条带； [4/266]
2025-08-03 10:54:14.175 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:54:14.178 [Thd =90]  Info Default CaptureBeginX: 70.92457, CaptureBeginY:56.85653, CaptureEndX:-70.96489, CaptureEndY:56.85653, VectorBeginX:72.48946, VectorBeginY:56.85653, VectorEndX:-72.92138, VectorEndY:56.85653, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:54:14.178 [Thd =90]  Info Default ***row:4, vectorBeginX:72.489, vectorBeginY:56.857, captureBeginX:70.925, captureBeginY:56.857, captureEndX:-70.965, captureEndY:56.857, vectorEndX:-72.921, vectorEndY:56.857
2025-08-03 10:54:14.178 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:14.179 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9245689742072,EndPoint:70.9648871711762
2025-08-03 10:54:14.571 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:14.573 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":3,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_3_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:18.012 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:18
2025-08-03 10:54:18.021 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:18
2025-08-03 10:54:19.081 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:4
2025-08-03 10:54:19.081 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:19.081 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:19.084 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:4
2025-08-03 10:54:19.084 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:4,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:19.084 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:A_SourceLightType
2025-08-03 10:54:19.084 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:4,source_light_Type:B_SourceLightType
2025-08-03 10:54:19.084 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,A_SourceLightType
2025-08-03 10:54:19.084 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：4,B_SourceLightType
2025-08-03 10:54:19.257 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;4/266,
2025-08-03 10:54:19.266 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:19.317 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:19.544 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:19.547 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_4_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:19.652 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 5
2025-08-03 10:54:19.652 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 5
2025-08-03 10:54:19.652 [Thd =87]  Info Default  开始扫描条带； [5/266]
2025-08-03 10:54:19.661 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:54:19.664 [Thd =90]  Info Default ***row:5, vectorBeginX:-72.921, vectorBeginY:56.428, captureBeginX:-71.302, captureBeginY:56.428, captureEndX:70.587, captureEndY:56.428, vectorEndX:72.489, vectorEndY:56.428
2025-08-03 10:54:19.664 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:19.666 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3022924636256,EndPoint:-70.5871636817579
2025-08-03 10:54:20.010 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:20.013 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":4,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_4_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:24.571 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:5
2025-08-03 10:54:24.571 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:24.571 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:24.573 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:5
2025-08-03 10:54:24.573 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:5,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:24.573 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:A_SourceLightType
2025-08-03 10:54:24.573 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:5,source_light_Type:B_SourceLightType
2025-08-03 10:54:24.573 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,A_SourceLightType
2025-08-03 10:54:24.574 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：5,B_SourceLightType
2025-08-03 10:54:24.750 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;5/266,
2025-08-03 10:54:24.760 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:24.827 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:25.033 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:25.035 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_5_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:25.047 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:25
2025-08-03 10:54:25.065 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:25
2025-08-03 10:54:25.173 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 6
2025-08-03 10:54:25.173 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 6
2025-08-03 10:54:25.173 [Thd =57]  Info Default  开始扫描条带； [6/266]
2025-08-03 10:54:25.182 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:54:25.185 [Thd =90]  Info Default CaptureBeginX: 70.92460, CaptureBeginY:55.99990, CaptureEndX:-70.96485, CaptureEndY:55.99990, VectorBeginX:72.48949, VectorBeginY:55.99990, VectorEndX:-72.92134, VectorEndY:55.99990, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:54:25.185 [Thd =90]  Info Default ***row:6, vectorBeginX:72.489, vectorBeginY:56.000, captureBeginX:70.925, captureBeginY:56.000, captureEndX:-70.965, captureEndY:56.000, vectorEndX:-72.921, vectorEndY:56.000
2025-08-03 10:54:25.185 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:25.186 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9246042992923,EndPoint:70.9648518460912
2025-08-03 10:54:25.527 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:25.529 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":5,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_5_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:30.082 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:30
2025-08-03 10:54:30.092 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:6
2025-08-03 10:54:30.092 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:30.092 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:30.094 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:6
2025-08-03 10:54:30.094 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:6,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:30.094 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:A_SourceLightType
2025-08-03 10:54:30.094 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,A_SourceLightType
2025-08-03 10:54:30.094 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：6,B_SourceLightType
2025-08-03 10:54:30.095 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:6,source_light_Type:B_SourceLightType
2025-08-03 10:54:30.102 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:30
2025-08-03 10:54:30.271 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;6/266,
2025-08-03 10:54:30.280 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:30.330 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:30.556 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:30.558 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_6_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:30.677 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 7
2025-08-03 10:54:30.677 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 7
2025-08-03 10:54:30.677 [Thd =5]  Info Default  开始扫描条带； [7/266]
2025-08-03 10:54:30.686 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:54:30.689 [Thd =90]  Info Default ***row:7, vectorBeginX:-72.921, vectorBeginY:55.572, captureBeginX:-71.302, captureBeginY:55.572, captureEndX:70.587, captureEndY:55.572, vectorEndX:72.490, vectorEndY:55.572
2025-08-03 10:54:30.689 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:30.690 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3022571385405,EndPoint:-70.5871990068429
2025-08-03 10:54:31.025 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:31.027 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":6,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_6_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:35.119 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:35
2025-08-03 10:54:35.138 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:35
2025-08-03 10:54:35.597 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:7
2025-08-03 10:54:35.597 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:35.597 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:35.599 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:7
2025-08-03 10:54:35.599 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:7,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:35.600 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:A_SourceLightType
2025-08-03 10:54:35.600 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:7,source_light_Type:B_SourceLightType
2025-08-03 10:54:35.600 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,A_SourceLightType
2025-08-03 10:54:35.600 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：7,B_SourceLightType
2025-08-03 10:54:35.639 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:35
2025-08-03 10:54:35.658 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:35
2025-08-03 10:54:35.771 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;7/266,
2025-08-03 10:54:35.780 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:35.843 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:36.054 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:36.057 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_7_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:36.189 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 8
2025-08-03 10:54:36.189 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 8
2025-08-03 10:54:36.189 [Thd =34]  Info Default  开始扫描条带； [8/266]
2025-08-03 10:54:36.198 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:54:36.201 [Thd =90]  Info Default CaptureBeginX: 70.92464, CaptureBeginY:55.14328, CaptureEndX:-70.96482, CaptureEndY:55.14328, VectorBeginX:72.48953, VectorBeginY:55.14328, VectorEndX:-72.92131, VectorEndY:55.14328, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:54:36.201 [Thd =90]  Info Default ***row:8, vectorBeginX:72.490, vectorBeginY:55.143, captureBeginX:70.925, captureBeginY:55.143, captureEndX:-70.965, captureEndY:55.143, vectorEndX:-72.921, vectorEndY:55.143
2025-08-03 10:54:36.201 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:36.202 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9246396243773,EndPoint:70.9648165210061
2025-08-03 10:54:36.526 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:36.528 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":7,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_7_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:41.106 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:8
2025-08-03 10:54:41.106 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:41.106 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:41.107 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:8
2025-08-03 10:54:41.107 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:8,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:41.107 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:A_SourceLightType
2025-08-03 10:54:41.107 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:8,source_light_Type:B_SourceLightType
2025-08-03 10:54:41.107 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,A_SourceLightType
2025-08-03 10:54:41.108 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：8,B_SourceLightType
2025-08-03 10:54:41.279 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;8/266,
2025-08-03 10:54:41.289 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:41.371 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:41.567 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:41.570 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_8_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:41.708 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 9
2025-08-03 10:54:41.708 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 9
2025-08-03 10:54:41.708 [Thd =87]  Info Default  开始扫描条带； [9/266]
2025-08-03 10:54:41.717 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:54:41.720 [Thd =90]  Info Default ***row:9, vectorBeginX:-72.921, vectorBeginY:54.715, captureBeginX:-71.302, captureBeginY:54.715, captureEndX:70.587, captureEndY:54.715, vectorEndX:72.490, vectorEndY:54.715
2025-08-03 10:54:41.720 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:41.722 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3022218134555,EndPoint:-70.5872343319279
2025-08-03 10:54:42.040 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:42.043 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":8,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_8_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:42.295 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:42
2025-08-03 10:54:42.308 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:42
2025-08-03 10:54:46.627 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:9
2025-08-03 10:54:46.627 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:46.627 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:46.629 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:9
2025-08-03 10:54:46.632 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:9,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:46.632 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:A_SourceLightType
2025-08-03 10:54:46.632 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:9,source_light_Type:B_SourceLightType
2025-08-03 10:54:46.632 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,A_SourceLightType
2025-08-03 10:54:46.632 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：9,B_SourceLightType
2025-08-03 10:54:46.806 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;9/266,
2025-08-03 10:54:46.815 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:46.824 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:46
2025-08-03 10:54:46.851 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:46
2025-08-03 10:54:46.865 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:47.087 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:47.108 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_9_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:47.212 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 10
2025-08-03 10:54:47.212 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 10
2025-08-03 10:54:47.212 [Thd =57]  Info Default  开始扫描条带； [10/266]
2025-08-03 10:54:47.221 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:54:47.224 [Thd =90]  Info Default CaptureBeginX: 70.92467, CaptureBeginY:54.28666, CaptureEndX:-70.96478, CaptureEndY:54.28666, VectorBeginX:72.48956, VectorBeginY:54.28666, VectorEndX:-72.92127, VectorEndY:54.28666, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:54:47.224 [Thd =90]  Info Default ***row:10, vectorBeginX:72.490, vectorBeginY:54.287, captureBeginX:70.925, captureBeginY:54.287, captureEndX:-70.965, captureEndY:54.287, vectorEndX:-72.921, vectorEndY:54.287
2025-08-03 10:54:47.224 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:47.226 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9246749494623,EndPoint:70.9647811959211
2025-08-03 10:54:47.575 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:47.578 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":9,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_9_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:52.131 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:10
2025-08-03 10:54:52.131 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:52.131 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:52.133 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:10
2025-08-03 10:54:52.133 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:10,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:52.133 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:A_SourceLightType
2025-08-03 10:54:52.133 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:10,source_light_Type:B_SourceLightType
2025-08-03 10:54:52.133 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,A_SourceLightType
2025-08-03 10:54:52.133 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：10,B_SourceLightType
2025-08-03 10:54:52.312 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;10/266,
2025-08-03 10:54:52.320 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:52.363 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:52.369 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:52
2025-08-03 10:54:52.378 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:52
2025-08-03 10:54:52.595 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:52.598 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_10_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:52.697 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 11
2025-08-03 10:54:52.697 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 11
2025-08-03 10:54:52.697 [Thd =75]  Info Default  开始扫描条带； [11/266]
2025-08-03 10:54:52.707 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:54:52.710 [Thd =90]  Info Default ***row:11, vectorBeginX:-72.921, vectorBeginY:53.858, captureBeginX:-71.302, captureBeginY:53.858, captureEndX:70.587, captureEndY:53.858, vectorEndX:72.490, vectorEndY:53.858
2025-08-03 10:54:52.710 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:52.712 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3021864883705,EndPoint:-70.587269657013
2025-08-03 10:54:53.073 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:53.075 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":10,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_10_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:57.618 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:11
2025-08-03 10:54:57.618 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:57.618 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:54:57.620 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:11
2025-08-03 10:54:57.620 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:11,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:54:57.620 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:A_SourceLightType
2025-08-03 10:54:57.620 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:11,source_light_Type:B_SourceLightType
2025-08-03 10:54:57.620 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,A_SourceLightType
2025-08-03 10:54:57.620 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：11,B_SourceLightType
2025-08-03 10:54:57.789 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;11/266,
2025-08-03 10:54:57.799 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:54:57.877 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:54:58.077 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:54:58.080 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_11_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:54:58.215 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 12
2025-08-03 10:54:58.215 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 12
2025-08-03 10:54:58.215 [Thd =51]  Info Default  开始扫描条带； [12/266]
2025-08-03 10:54:58.224 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:54:58.226 [Thd =90]  Info Default CaptureBeginX: 70.92471, CaptureBeginY:53.43003, CaptureEndX:-70.96475, CaptureEndY:53.43003, VectorBeginX:72.48960, VectorBeginY:53.43003, VectorEndX:-72.92123, VectorEndY:53.43003, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:54:58.227 [Thd =90]  Info Default ***row:12, vectorBeginX:72.490, vectorBeginY:53.430, captureBeginX:70.925, captureBeginY:53.430, captureEndX:-70.965, captureEndY:53.430, vectorEndX:-72.921, vectorEndY:53.430
2025-08-03 10:54:58.227 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:54:58.229 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9247102745474,EndPoint:70.9647458708361
2025-08-03 10:54:58.398 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:54:58
2025-08-03 10:54:58.434 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:54:58
2025-08-03 10:54:58.552 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:54:58.554 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":11,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_11_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:03.132 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:12
2025-08-03 10:55:03.132 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:03.132 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:03.135 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:12
2025-08-03 10:55:03.135 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:12,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:03.135 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:A_SourceLightType
2025-08-03 10:55:03.135 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:12,source_light_Type:B_SourceLightType
2025-08-03 10:55:03.135 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,A_SourceLightType
2025-08-03 10:55:03.135 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：12,B_SourceLightType
2025-08-03 10:55:03.313 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;12/266,
2025-08-03 10:55:03.324 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:03.386 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:03.592 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:03.595 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_12_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:03.730 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 13
2025-08-03 10:55:03.730 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 13
2025-08-03 10:55:03.730 [Thd =74]  Info Default  开始扫描条带； [13/266]
2025-08-03 10:55:03.739 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:55:03.742 [Thd =90]  Info Default ***row:13, vectorBeginX:-72.921, vectorBeginY:53.002, captureBeginX:-71.302, captureBeginY:53.002, captureEndX:70.587, captureEndY:53.002, vectorEndX:72.490, vectorEndY:53.002
2025-08-03 10:55:03.742 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:03.743 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3021511632854,EndPoint:-70.587304982098
2025-08-03 10:55:04.059 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:04.061 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":12,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_12_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:04.953 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:04
2025-08-03 10:55:04.966 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:04
2025-08-03 10:55:08.649 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:13
2025-08-03 10:55:08.649 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:08.649 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:08.651 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:13
2025-08-03 10:55:08.651 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:13,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:08.651 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:A_SourceLightType
2025-08-03 10:55:08.651 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,A_SourceLightType
2025-08-03 10:55:08.651 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：13,B_SourceLightType
2025-08-03 10:55:08.652 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:13,source_light_Type:B_SourceLightType
2025-08-03 10:55:08.823 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;13/266,
2025-08-03 10:55:08.832 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:08.878 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:09.111 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:09.115 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_13_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:09.217 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 14
2025-08-03 10:55:09.217 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 14
2025-08-03 10:55:09.217 [Thd =5]  Info Default  开始扫描条带； [14/266]
2025-08-03 10:55:09.226 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:55:09.229 [Thd =90]  Info Default CaptureBeginX: 70.92475, CaptureBeginY:52.57341, CaptureEndX:-70.96471, CaptureEndY:52.57341, VectorBeginX:72.48964, VectorBeginY:52.57341, VectorEndX:-72.92120, VectorEndY:52.57341, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:55:09.229 [Thd =90]  Info Default ***row:14, vectorBeginX:72.490, vectorBeginY:52.573, captureBeginX:70.925, captureBeginY:52.573, captureEndX:-70.965, captureEndY:52.573, vectorEndX:-72.921, vectorEndY:52.573
2025-08-03 10:55:09.229 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:09.230 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9247455996324,EndPoint:70.964710545751
2025-08-03 10:55:09.585 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:09.587 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":13,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_13_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:09.653 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:09
2025-08-03 10:55:09.665 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:09
2025-08-03 10:55:14.133 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:14
2025-08-03 10:55:14.133 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:14.133 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:14.136 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:14
2025-08-03 10:55:14.136 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:14,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:14.136 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:A_SourceLightType
2025-08-03 10:55:14.136 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:14,source_light_Type:B_SourceLightType
2025-08-03 10:55:14.136 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,A_SourceLightType
2025-08-03 10:55:14.136 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：14,B_SourceLightType
2025-08-03 10:55:14.307 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;14/266,
2025-08-03 10:55:14.316 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:14.362 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:14.603 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:14.606 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_14_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:14.709 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 15
2025-08-03 10:55:14.709 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 15
2025-08-03 10:55:14.709 [Thd =65]  Info Default  开始扫描条带； [15/266]
2025-08-03 10:55:14.718 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:55:14.721 [Thd =90]  Info Default ***row:15, vectorBeginX:-72.921, vectorBeginY:52.145, captureBeginX:-71.302, captureBeginY:52.145, captureEndX:70.587, captureEndY:52.145, vectorEndX:72.490, vectorEndY:52.145
2025-08-03 10:55:14.721 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:14.722 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3021158382004,EndPoint:-70.5873403071831
2025-08-03 10:55:15.081 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:15.084 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":14,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_14_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:15.180 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:15
2025-08-03 10:55:15.192 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:15
2025-08-03 10:55:19.626 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:15
2025-08-03 10:55:19.626 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:19.626 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:19.629 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:15
2025-08-03 10:55:19.629 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:15,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:19.629 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:A_SourceLightType
2025-08-03 10:55:19.629 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:15,source_light_Type:B_SourceLightType
2025-08-03 10:55:19.630 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,A_SourceLightType
2025-08-03 10:55:19.630 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：15,B_SourceLightType
2025-08-03 10:55:19.806 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;15/266,
2025-08-03 10:55:19.815 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:19.858 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:20.088 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:20.091 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_15_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:20.195 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 16
2025-08-03 10:55:20.195 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 16
2025-08-03 10:55:20.195 [Thd =74]  Info Default  开始扫描条带； [16/266]
2025-08-03 10:55:20.204 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:55:20.206 [Thd =90]  Info Default CaptureBeginX: 70.92478, CaptureBeginY:51.71679, CaptureEndX:-70.96468, CaptureEndY:51.71679, VectorBeginX:72.48967, VectorBeginY:51.71679, VectorEndX:-72.92116, VectorEndY:51.71679, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:55:20.206 [Thd =90]  Info Default ***row:16, vectorBeginX:72.490, vectorBeginY:51.717, captureBeginX:70.925, captureBeginY:51.717, captureEndX:-70.965, captureEndY:51.717, vectorEndX:-72.921, vectorEndY:51.717
2025-08-03 10:55:20.206 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:20.208 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9247809247174,EndPoint:70.964675220666
2025-08-03 10:55:20.572 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:20.574 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":15,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_15_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:22.217 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:22
2025-08-03 10:55:22.230 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:22
2025-08-03 10:55:25.112 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:16
2025-08-03 10:55:25.112 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:25.112 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:25.114 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:16
2025-08-03 10:55:25.114 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:16,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:25.115 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:A_SourceLightType
2025-08-03 10:55:25.115 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:16,source_light_Type:B_SourceLightType
2025-08-03 10:55:25.115 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,A_SourceLightType
2025-08-03 10:55:25.115 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：16,B_SourceLightType
2025-08-03 10:55:25.292 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;16/266,
2025-08-03 10:55:25.301 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:25.345 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:25.573 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:25.575 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_16_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:25.691 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 17
2025-08-03 10:55:25.691 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 17
2025-08-03 10:55:25.691 [Thd =51]  Info Default  开始扫描条带； [17/266]
2025-08-03 10:55:25.700 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:55:25.703 [Thd =90]  Info Default ***row:17, vectorBeginX:-72.921, vectorBeginY:51.288, captureBeginX:-71.302, captureBeginY:51.288, captureEndX:70.587, captureEndY:51.288, vectorEndX:72.490, vectorEndY:51.288
2025-08-03 10:55:25.703 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:25.705 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3020805131153,EndPoint:-70.5873756322681
2025-08-03 10:55:26.055 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:26.060 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":16,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_16_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:28.342 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:28
2025-08-03 10:55:28.354 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:28
2025-08-03 10:55:30.616 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:17
2025-08-03 10:55:30.616 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:30.616 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:30.618 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:17
2025-08-03 10:55:30.618 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:17,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:30.618 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:A_SourceLightType
2025-08-03 10:55:30.618 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:17,source_light_Type:B_SourceLightType
2025-08-03 10:55:30.618 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,A_SourceLightType
2025-08-03 10:55:30.618 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：17,B_SourceLightType
2025-08-03 10:55:30.795 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;17/266,
2025-08-03 10:55:30.805 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:30.847 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:31.075 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:31.078 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_17_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:31.183 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 18
2025-08-03 10:55:31.183 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 18
2025-08-03 10:55:31.183 [Thd =74]  Info Default  开始扫描条带； [18/266]
2025-08-03 10:55:31.192 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:55:31.195 [Thd =90]  Info Default CaptureBeginX: 70.92482, CaptureBeginY:50.86016, CaptureEndX:-70.96464, CaptureEndY:50.86016, VectorBeginX:72.48971, VectorBeginY:50.86016, VectorEndX:-72.92113, VectorEndY:50.86016, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:55:31.195 [Thd =90]  Info Default ***row:18, vectorBeginX:72.490, vectorBeginY:50.860, captureBeginX:70.925, captureBeginY:50.860, captureEndX:-70.965, captureEndY:50.860, vectorEndX:-72.921, vectorEndY:50.860
2025-08-03 10:55:31.195 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:31.197 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9248162498025,EndPoint:70.964639895581
2025-08-03 10:55:31.551 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:31.555 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":17,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_17_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:31.866 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:31
2025-08-03 10:55:31.884 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:31
2025-08-03 10:55:36.105 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:18
2025-08-03 10:55:36.105 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:36.106 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:36.108 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:18
2025-08-03 10:55:36.108 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:18,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:36.108 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:A_SourceLightType
2025-08-03 10:55:36.108 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:18,source_light_Type:B_SourceLightType
2025-08-03 10:55:36.108 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,A_SourceLightType
2025-08-03 10:55:36.108 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：18,B_SourceLightType
2025-08-03 10:55:36.286 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;18/266,
2025-08-03 10:55:36.296 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:36.332 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:36.570 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:36.573 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_18_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:36.668 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 19
2025-08-03 10:55:36.668 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 19
2025-08-03 10:55:36.668 [Thd =66]  Info Default  开始扫描条带； [19/266]
2025-08-03 10:55:36.677 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:55:36.680 [Thd =90]  Info Default ***row:19, vectorBeginX:-72.921, vectorBeginY:50.432, captureBeginX:-71.302, captureBeginY:50.432, captureEndX:70.587, captureEndY:50.432, vectorEndX:72.490, vectorEndY:50.432
2025-08-03 10:55:36.680 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:36.682 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3020451880303,EndPoint:-70.5874109573531
2025-08-03 10:55:37.049 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:37.053 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":18,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_18_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:39.407 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:39
2025-08-03 10:55:39.428 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:39
2025-08-03 10:55:41.587 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:19
2025-08-03 10:55:41.587 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:41.587 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:41.589 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:19
2025-08-03 10:55:41.589 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:19,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:41.589 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:A_SourceLightType
2025-08-03 10:55:41.589 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:19,source_light_Type:B_SourceLightType
2025-08-03 10:55:41.589 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,A_SourceLightType
2025-08-03 10:55:41.590 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：19,B_SourceLightType
2025-08-03 10:55:41.762 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;19/266,
2025-08-03 10:55:41.771 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:41.828 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:42.046 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:42.048 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_19_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:42.178 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 20
2025-08-03 10:55:42.178 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 20
2025-08-03 10:55:42.178 [Thd =75]  Info Default  开始扫描条带； [20/266]
2025-08-03 10:55:42.187 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:55:42.190 [Thd =90]  Info Default CaptureBeginX: 70.92485, CaptureBeginY:50.00354, CaptureEndX:-70.96460, CaptureEndY:50.00354, VectorBeginX:72.48974, VectorBeginY:50.00354, VectorEndX:-72.92109, VectorEndY:50.00354, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:55:42.190 [Thd =90]  Info Default ***row:20, vectorBeginX:72.490, vectorBeginY:50.004, captureBeginX:70.925, captureBeginY:50.004, captureEndX:-70.965, captureEndY:50.004, vectorEndX:-72.921, vectorEndY:50.004
2025-08-03 10:55:42.190 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:42.192 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9248515748875,EndPoint:70.9646045704959
2025-08-03 10:55:42.524 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:42.528 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":19,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_19_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:43.943 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:43
2025-08-03 10:55:43.957 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:43
2025-08-03 10:55:47.097 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:20
2025-08-03 10:55:47.098 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:47.098 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:47.272 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;20/266,
2025-08-03 10:55:47.275 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:20
2025-08-03 10:55:47.275 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:20,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:47.275 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:B_SourceLightType
2025-08-03 10:55:47.275 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:20,source_light_Type:A_SourceLightType
2025-08-03 10:55:47.275 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,B_SourceLightType
2025-08-03 10:55:47.276 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：20,A_SourceLightType
2025-08-03 10:55:47.285 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:47.333 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:47.669 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 21
2025-08-03 10:55:47.669 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 21
2025-08-03 10:55:47.669 [Thd =5]  Info Default  开始扫描条带； [21/266]
2025-08-03 10:55:47.678 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:55:47.681 [Thd =90]  Info Default ***row:21, vectorBeginX:-72.921, vectorBeginY:49.575, captureBeginX:-71.302, captureBeginY:49.575, captureEndX:70.587, captureEndY:49.575, vectorEndX:72.490, vectorEndY:49.575
2025-08-03 10:55:47.681 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:47.683 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3020098629453,EndPoint:-70.5874462824382
2025-08-03 10:55:47.729 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:47.731 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_20_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:48.225 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:48.228 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":20,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_20_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:49.475 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:49
2025-08-03 10:55:49.492 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:49
2025-08-03 10:55:52.592 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:21
2025-08-03 10:55:52.593 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:52.593 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:52.595 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:21
2025-08-03 10:55:52.595 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:21,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:52.595 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:A_SourceLightType
2025-08-03 10:55:52.595 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:21,source_light_Type:B_SourceLightType
2025-08-03 10:55:52.595 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,A_SourceLightType
2025-08-03 10:55:52.595 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：21,B_SourceLightType
2025-08-03 10:55:52.763 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;21/266,
2025-08-03 10:55:52.772 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:52.809 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:53.060 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:53.062 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_21_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:53.157 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 22
2025-08-03 10:55:53.157 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 22
2025-08-03 10:55:53.157 [Thd =5]  Info Default  开始扫描条带； [22/266]
2025-08-03 10:55:53.166 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:55:53.169 [Thd =90]  Info Default CaptureBeginX: 70.92489, CaptureBeginY:49.14691, CaptureEndX:-70.96457, CaptureEndY:49.14691, VectorBeginX:72.48978, VectorBeginY:49.14691, VectorEndX:-72.92106, VectorEndY:49.14691, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:55:53.169 [Thd =90]  Info Default ***row:22, vectorBeginX:72.490, vectorBeginY:49.147, captureBeginX:70.925, captureBeginY:49.147, captureEndX:-70.965, captureEndY:49.147, vectorEndX:-72.921, vectorEndY:49.147
2025-08-03 10:55:53.169 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:53.170 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9248868999725,EndPoint:70.9645692454109
2025-08-03 10:55:53.503 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:55:53
2025-08-03 10:55:53.521 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:55:53
2025-08-03 10:55:53.540 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:53.543 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":21,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_21_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:58.074 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:22
2025-08-03 10:55:58.074 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:58.074 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:55:58.076 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:22
2025-08-03 10:55:58.076 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:22,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:55:58.076 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:A_SourceLightType
2025-08-03 10:55:58.076 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,A_SourceLightType
2025-08-03 10:55:58.077 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：22,B_SourceLightType
2025-08-03 10:55:58.077 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:22,source_light_Type:B_SourceLightType
2025-08-03 10:55:58.247 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;22/266,
2025-08-03 10:55:58.257 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:55:58.312 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:55:58.536 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:55:58.539 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_22_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:55:58.648 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 23
2025-08-03 10:55:58.648 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 23
2025-08-03 10:55:58.648 [Thd =74]  Info Default  开始扫描条带； [23/266]
2025-08-03 10:55:58.657 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:55:58.660 [Thd =90]  Info Default ***row:23, vectorBeginX:-72.921, vectorBeginY:48.719, captureBeginX:-71.302, captureBeginY:48.719, captureEndX:70.587, captureEndY:48.719, vectorEndX:72.490, vectorEndY:48.719
2025-08-03 10:55:58.660 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:55:58.661 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3019745378602,EndPoint:-70.5874816075232
2025-08-03 10:55:59.006 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:55:59.008 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":22,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_22_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:01.546 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:01
2025-08-03 10:56:01.566 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:01
2025-08-03 10:56:03.569 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:23
2025-08-03 10:56:03.569 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:03.569 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:03.571 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:23
2025-08-03 10:56:03.571 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:23,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:03.571 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:A_SourceLightType
2025-08-03 10:56:03.571 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,A_SourceLightType
2025-08-03 10:56:03.571 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：23,B_SourceLightType
2025-08-03 10:56:03.572 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:23,source_light_Type:B_SourceLightType
2025-08-03 10:56:03.748 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;23/266,
2025-08-03 10:56:03.758 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:03.809 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:04.032 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:04.035 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_23_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:04.143 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 24
2025-08-03 10:56:04.143 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 24
2025-08-03 10:56:04.143 [Thd =34]  Info Default  开始扫描条带； [24/266]
2025-08-03 10:56:04.161 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:56:04.164 [Thd =90]  Info Default CaptureBeginX: 70.92492, CaptureBeginY:48.29029, CaptureEndX:-70.96453, CaptureEndY:48.29029, VectorBeginX:72.48981, VectorBeginY:48.29029, VectorEndX:-72.92102, VectorEndY:48.29029, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:56:04.164 [Thd =90]  Info Default ***row:24, vectorBeginX:72.490, vectorBeginY:48.290, captureBeginX:70.925, captureBeginY:48.290, captureEndX:-70.965, captureEndY:48.290, vectorEndX:-72.921, vectorEndY:48.290
2025-08-03 10:56:04.164 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:04.165 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9249222250576,EndPoint:70.9645339203258
2025-08-03 10:56:04.504 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:04.507 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":23,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_23_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:06.081 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:06
2025-08-03 10:56:06.103 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:06
2025-08-03 10:56:09.067 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:24
2025-08-03 10:56:09.067 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:09.068 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:09.070 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:24
2025-08-03 10:56:09.070 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:24,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:09.070 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:A_SourceLightType
2025-08-03 10:56:09.070 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:24,source_light_Type:B_SourceLightType
2025-08-03 10:56:09.070 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,A_SourceLightType
2025-08-03 10:56:09.070 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：24,B_SourceLightType
2025-08-03 10:56:09.240 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;24/266,
2025-08-03 10:56:09.249 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:09.307 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:09.527 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:09.529 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_24_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:09.643 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 25
2025-08-03 10:56:09.643 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 25
2025-08-03 10:56:09.643 [Thd =65]  Info Default  开始扫描条带； [25/266]
2025-08-03 10:56:09.652 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:56:09.655 [Thd =90]  Info Default ***row:25, vectorBeginX:-72.921, vectorBeginY:47.862, captureBeginX:-71.302, captureBeginY:47.862, captureEndX:70.588, captureEndY:47.862, vectorEndX:72.490, vectorEndY:47.862
2025-08-03 10:56:09.655 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:09.657 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3019392127752,EndPoint:-70.5875169326082
2025-08-03 10:56:09.995 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:09.997 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":24,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_24_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:10.696 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:10
2025-08-03 10:56:10.709 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:10
2025-08-03 10:56:14.561 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:25
2025-08-03 10:56:14.561 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:14.561 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:14.563 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:25
2025-08-03 10:56:14.563 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:25,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:14.563 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:A_SourceLightType
2025-08-03 10:56:14.563 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:25,source_light_Type:B_SourceLightType
2025-08-03 10:56:14.563 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,A_SourceLightType
2025-08-03 10:56:14.563 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：25,B_SourceLightType
2025-08-03 10:56:14.742 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;25/266,
2025-08-03 10:56:14.751 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:14.807 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:15.028 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:15.050 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_25_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:15.154 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 26
2025-08-03 10:56:15.154 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 26
2025-08-03 10:56:15.154 [Thd =87]  Info Default  开始扫描条带； [26/266]
2025-08-03 10:56:15.163 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:56:15.166 [Thd =90]  Info Default CaptureBeginX: 70.92496, CaptureBeginY:47.43367, CaptureEndX:-70.96450, CaptureEndY:47.43367, VectorBeginX:72.48985, VectorBeginY:47.43367, VectorEndX:-72.92099, VectorEndY:47.43367, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:56:15.166 [Thd =90]  Info Default ***row:26, vectorBeginX:72.490, vectorBeginY:47.434, captureBeginX:70.925, captureBeginY:47.434, captureEndX:-70.964, captureEndY:47.434, vectorEndX:-72.921, vectorEndY:47.434
2025-08-03 10:56:15.166 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:15.168 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9249575501426,EndPoint:70.9644985952408
2025-08-03 10:56:15.526 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:15.528 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":25,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_25_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:16.226 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:16
2025-08-03 10:56:16.238 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:16
2025-08-03 10:56:20.074 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:26
2025-08-03 10:56:20.074 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:20.074 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:20.076 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:26
2025-08-03 10:56:20.077 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:26,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:20.077 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:A_SourceLightType
2025-08-03 10:56:20.077 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:26,source_light_Type:B_SourceLightType
2025-08-03 10:56:20.077 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,A_SourceLightType
2025-08-03 10:56:20.077 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：26,B_SourceLightType
2025-08-03 10:56:20.247 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;26/266,
2025-08-03 10:56:20.256 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:20.310 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:20.538 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:20.541 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_26_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:20.654 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 27
2025-08-03 10:56:20.654 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 27
2025-08-03 10:56:20.654 [Thd =75]  Info Default  开始扫描条带； [27/266]
2025-08-03 10:56:20.663 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:56:20.666 [Thd =90]  Info Default ***row:27, vectorBeginX:-72.921, vectorBeginY:47.005, captureBeginX:-71.302, captureBeginY:47.005, captureEndX:70.588, captureEndY:47.005, vectorEndX:72.490, vectorEndY:47.005
2025-08-03 10:56:20.666 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:20.669 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3019038876902,EndPoint:-70.5875522576933
2025-08-03 10:56:21.021 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:21.024 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":26,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_26_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:23.804 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:23
2025-08-03 10:56:23.817 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:23
2025-08-03 10:56:25.578 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:27
2025-08-03 10:56:25.579 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:25.579 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:25.581 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:27
2025-08-03 10:56:25.581 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:27,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:25.581 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:A_SourceLightType
2025-08-03 10:56:25.581 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:27,source_light_Type:B_SourceLightType
2025-08-03 10:56:25.581 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,A_SourceLightType
2025-08-03 10:56:25.582 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：27,B_SourceLightType
2025-08-03 10:56:25.756 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;27/266,
2025-08-03 10:56:25.766 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:25.815 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:26.038 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:26.041 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_27_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:26.152 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 28
2025-08-03 10:56:26.152 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 28
2025-08-03 10:56:26.152 [Thd =95]  Info Default  开始扫描条带； [28/266]
2025-08-03 10:56:26.161 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:56:26.164 [Thd =90]  Info Default CaptureBeginX: 70.92499, CaptureBeginY:46.57704, CaptureEndX:-70.96446, CaptureEndY:46.57704, VectorBeginX:72.48988, VectorBeginY:46.57704, VectorEndX:-72.92095, VectorEndY:46.57704, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:56:26.164 [Thd =90]  Info Default ***row:28, vectorBeginX:72.490, vectorBeginY:46.577, captureBeginX:70.925, captureBeginY:46.577, captureEndX:-70.964, captureEndY:46.577, vectorEndX:-72.921, vectorEndY:46.577
2025-08-03 10:56:26.164 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:26.166 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9249928752277,EndPoint:70.9644632701558
2025-08-03 10:56:26.518 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:26.521 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":27,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_27_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:26.825 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:26
2025-08-03 10:56:26.842 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:26
2025-08-03 10:56:31.069 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:28
2025-08-03 10:56:31.069 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:31.070 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:31.071 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:28
2025-08-03 10:56:31.071 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:28,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:31.071 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:A_SourceLightType
2025-08-03 10:56:31.071 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:28,source_light_Type:B_SourceLightType
2025-08-03 10:56:31.071 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,A_SourceLightType
2025-08-03 10:56:31.071 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：28,B_SourceLightType
2025-08-03 10:56:31.250 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;28/266,
2025-08-03 10:56:31.259 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:31.303 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:31.527 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:31.528 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_28_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:31.648 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 29
2025-08-03 10:56:31.648 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 29
2025-08-03 10:56:31.648 [Thd =95]  Info Default  开始扫描条带； [29/266]
2025-08-03 10:56:31.657 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:56:31.660 [Thd =90]  Info Default ***row:29, vectorBeginX:-72.921, vectorBeginY:46.149, captureBeginX:-71.302, captureBeginY:46.149, captureEndX:70.588, captureEndY:46.149, vectorEndX:72.490, vectorEndY:46.149
2025-08-03 10:56:31.660 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:31.661 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3018685626051,EndPoint:-70.5875875827783
2025-08-03 10:56:32.001 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:32.003 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":28,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_28_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:33.362 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:33
2025-08-03 10:56:33.381 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:33
2025-08-03 10:56:36.566 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:29
2025-08-03 10:56:36.566 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:36.566 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:36.569 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:29
2025-08-03 10:56:36.569 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:29,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:36.569 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:A_SourceLightType
2025-08-03 10:56:36.569 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:29,source_light_Type:B_SourceLightType
2025-08-03 10:56:36.569 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,A_SourceLightType
2025-08-03 10:56:36.569 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：29,B_SourceLightType
2025-08-03 10:56:36.742 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;29/266,
2025-08-03 10:56:36.751 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:36.797 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:37.023 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:37.033 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_29_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:37.135 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 30
2025-08-03 10:56:37.135 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 30
2025-08-03 10:56:37.135 [Thd =87]  Info Default  开始扫描条带； [30/266]
2025-08-03 10:56:37.144 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:56:37.147 [Thd =90]  Info Default CaptureBeginX: 70.92503, CaptureBeginY:45.72042, CaptureEndX:-70.96443, CaptureEndY:45.72042, VectorBeginX:72.48992, VectorBeginY:45.72042, VectorEndX:-72.92092, VectorEndY:45.72042, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:56:37.147 [Thd =90]  Info Default ***row:30, vectorBeginX:72.490, vectorBeginY:45.720, captureBeginX:70.925, captureBeginY:45.720, captureEndX:-70.964, captureEndY:45.720, vectorEndX:-72.921, vectorEndY:45.720
2025-08-03 10:56:37.147 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:37.149 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9250282003127,EndPoint:70.9644279450707
2025-08-03 10:56:37.539 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:37.542 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":29,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_29_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:38.395 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:38
2025-08-03 10:56:38.419 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:38
2025-08-03 10:56:42.051 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:30
2025-08-03 10:56:42.052 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:42.052 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:42.054 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:30
2025-08-03 10:56:42.054 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:30,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:42.054 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:A_SourceLightType
2025-08-03 10:56:42.055 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:30,source_light_Type:B_SourceLightType
2025-08-03 10:56:42.055 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,A_SourceLightType
2025-08-03 10:56:42.055 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：30,B_SourceLightType
2025-08-03 10:56:42.229 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;30/266,
2025-08-03 10:56:42.238 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:42.284 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:42.514 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:42.516 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_30_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:42.620 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 31
2025-08-03 10:56:42.620 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 31
2025-08-03 10:56:42.620 [Thd =74]  Info Default  开始扫描条带； [31/266]
2025-08-03 10:56:42.629 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:56:42.632 [Thd =90]  Info Default ***row:31, vectorBeginX:-72.921, vectorBeginY:45.292, captureBeginX:-71.302, captureBeginY:45.292, captureEndX:70.588, captureEndY:45.292, vectorEndX:72.490, vectorEndY:45.292
2025-08-03 10:56:42.632 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:42.634 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3018332375201,EndPoint:-70.5876229078633
2025-08-03 10:56:42.984 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:42.987 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":30,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_30_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:45.441 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:45
2025-08-03 10:56:45.454 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:45
2025-08-03 10:56:47.538 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:31
2025-08-03 10:56:47.538 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:47.538 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:47.541 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:31
2025-08-03 10:56:47.541 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:31,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:47.541 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:A_SourceLightType
2025-08-03 10:56:47.541 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:31,source_light_Type:B_SourceLightType
2025-08-03 10:56:47.541 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,A_SourceLightType
2025-08-03 10:56:47.541 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：31,B_SourceLightType
2025-08-03 10:56:47.709 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;31/266,
2025-08-03 10:56:47.718 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:47.797 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:48.003 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:48.005 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_31_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:48.143 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 32
2025-08-03 10:56:48.143 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 32
2025-08-03 10:56:48.143 [Thd =57]  Info Default  开始扫描条带； [32/266]
2025-08-03 10:56:48.152 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:56:48.155 [Thd =90]  Info Default CaptureBeginX: 70.92506, CaptureBeginY:44.86380, CaptureEndX:-70.96439, CaptureEndY:44.86380, VectorBeginX:72.48995, VectorBeginY:44.86380, VectorEndX:-72.92088, VectorEndY:44.86380, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:56:48.155 [Thd =90]  Info Default ***row:32, vectorBeginX:72.490, vectorBeginY:44.864, captureBeginX:70.925, captureBeginY:44.864, captureEndX:-70.964, captureEndY:44.864, vectorEndX:-72.921, vectorEndY:44.864
2025-08-03 10:56:48.155 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:48.157 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9250635253977,EndPoint:70.9643926199857
2025-08-03 10:56:48.482 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:48.485 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":31,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_31_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:49.467 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:49
2025-08-03 10:56:49.487 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:49
2025-08-03 10:56:53.060 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:32
2025-08-03 10:56:53.061 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:53.061 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:53.063 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:32
2025-08-03 10:56:53.063 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:32,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:53.063 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:A_SourceLightType
2025-08-03 10:56:53.063 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:32,source_light_Type:B_SourceLightType
2025-08-03 10:56:53.063 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,A_SourceLightType
2025-08-03 10:56:53.063 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：32,B_SourceLightType
2025-08-03 10:56:53.233 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;32/266,
2025-08-03 10:56:53.243 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:53.313 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:53.522 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:53.525 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_32_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:53.650 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 33
2025-08-03 10:56:53.650 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 33
2025-08-03 10:56:53.650 [Thd =50]  Info Default  开始扫描条带； [33/266]
2025-08-03 10:56:53.661 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:56:53.664 [Thd =90]  Info Default ***row:33, vectorBeginX:-72.921, vectorBeginY:44.435, captureBeginX:-71.302, captureBeginY:44.435, captureEndX:70.588, captureEndY:44.435, vectorEndX:72.490, vectorEndY:44.435
2025-08-03 10:56:53.664 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:53.666 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.301797912435,EndPoint:-70.5876582329484
2025-08-03 10:56:53.990 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:53.992 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":32,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_32_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:55.005 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:56:55
2025-08-03 10:56:55.018 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:56:55
2025-08-03 10:56:58.577 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:33
2025-08-03 10:56:58.577 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:58.577 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:56:58.579 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:33
2025-08-03 10:56:58.579 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:33,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:56:58.579 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:A_SourceLightType
2025-08-03 10:56:58.580 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:33,source_light_Type:B_SourceLightType
2025-08-03 10:56:58.580 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,A_SourceLightType
2025-08-03 10:56:58.580 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：33,B_SourceLightType
2025-08-03 10:56:58.752 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;33/266,
2025-08-03 10:56:58.761 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:56:58.807 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:56:59.034 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:56:59.050 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_33_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:56:59.153 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 34
2025-08-03 10:56:59.153 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 34
2025-08-03 10:56:59.153 [Thd =58]  Info Default  开始扫描条带； [34/266]
2025-08-03 10:56:59.162 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:56:59.164 [Thd =90]  Info Default CaptureBeginX: 70.92510, CaptureBeginY:44.00717, CaptureEndX:-70.96436, CaptureEndY:44.00717, VectorBeginX:72.48999, VectorBeginY:44.00717, VectorEndX:-72.92085, VectorEndY:44.00717, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:56:59.164 [Thd =90]  Info Default ***row:34, vectorBeginX:72.490, vectorBeginY:44.007, captureBeginX:70.925, captureBeginY:44.007, captureEndX:-70.964, captureEndY:44.007, vectorEndX:-72.921, vectorEndY:44.007
2025-08-03 10:56:59.164 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:56:59.167 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9250988504828,EndPoint:70.9643572949007
2025-08-03 10:56:59.522 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:56:59.525 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":33,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_33_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:00.539 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:00
2025-08-03 10:57:00.553 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:00
2025-08-03 10:57:04.074 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:34
2025-08-03 10:57:04.074 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:04.074 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:04.256 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;34/266,
2025-08-03 10:57:04.264 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:34
2025-08-03 10:57:04.265 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:34,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:04.265 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:B_SourceLightType
2025-08-03 10:57:04.265 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:34,source_light_Type:A_SourceLightType
2025-08-03 10:57:04.265 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,B_SourceLightType
2025-08-03 10:57:04.265 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：34,A_SourceLightType
2025-08-03 10:57:04.274 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:04.329 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:04.667 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 35
2025-08-03 10:57:04.667 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 35
2025-08-03 10:57:04.667 [Thd =95]  Info Default  开始扫描条带； [35/266]
2025-08-03 10:57:04.676 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:57:04.679 [Thd =90]  Info Default ***row:35, vectorBeginX:-72.921, vectorBeginY:43.579, captureBeginX:-71.302, captureBeginY:43.579, captureEndX:70.588, captureEndY:43.579, vectorEndX:72.490, vectorEndY:43.579
2025-08-03 10:57:04.679 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:04.681 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.30176258735,EndPoint:-70.5876935580334
2025-08-03 10:57:04.718 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:04.720 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_34_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:05.232 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:05.234 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":34,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_34_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:05.569 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:05
2025-08-03 10:57:05.581 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:05
2025-08-03 10:57:09.587 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:35
2025-08-03 10:57:09.587 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:09.588 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:09.611 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:35
2025-08-03 10:57:09.611 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:35,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:09.611 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:B_SourceLightType
2025-08-03 10:57:09.611 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:35,source_light_Type:A_SourceLightType
2025-08-03 10:57:09.611 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,B_SourceLightType
2025-08-03 10:57:09.612 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：35,A_SourceLightType
2025-08-03 10:57:09.763 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;35/266,
2025-08-03 10:57:09.773 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:09.820 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:10.072 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:10.075 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_35_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:10.156 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 36
2025-08-03 10:57:10.156 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 36
2025-08-03 10:57:10.156 [Thd =74]  Info Default  开始扫描条带； [36/266]
2025-08-03 10:57:10.165 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:57:10.168 [Thd =90]  Info Default CaptureBeginX: 70.92513, CaptureBeginY:43.15055, CaptureEndX:-70.96432, CaptureEndY:43.15055, VectorBeginX:72.49002, VectorBeginY:43.15055, VectorEndX:-72.92081, VectorEndY:43.15055, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:57:10.168 [Thd =90]  Info Default ***row:36, vectorBeginX:72.490, vectorBeginY:43.151, captureBeginX:70.925, captureBeginY:43.151, captureEndX:-70.964, captureEndY:43.151, vectorEndX:-72.921, vectorEndY:43.151
2025-08-03 10:57:10.168 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:10.169 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9251341755678,EndPoint:70.9643219698156
2025-08-03 10:57:10.553 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:10.556 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":35,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_35_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:11.600 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:11
2025-08-03 10:57:11.613 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:11
2025-08-03 10:57:15.075 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:36
2025-08-03 10:57:15.076 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:15.076 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:15.078 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:36
2025-08-03 10:57:15.078 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:36,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:15.078 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:A_SourceLightType
2025-08-03 10:57:15.078 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:36,source_light_Type:B_SourceLightType
2025-08-03 10:57:15.078 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,A_SourceLightType
2025-08-03 10:57:15.078 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：36,B_SourceLightType
2025-08-03 10:57:15.249 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;36/266,
2025-08-03 10:57:15.259 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:15.344 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:15.537 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:15.540 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_36_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:15.693 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 37
2025-08-03 10:57:15.693 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 37
2025-08-03 10:57:15.693 [Thd =87]  Info Default  开始扫描条带； [37/266]
2025-08-03 10:57:15.702 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:57:15.704 [Thd =90]  Info Default ***row:37, vectorBeginX:-72.921, vectorBeginY:42.722, captureBeginX:-71.302, captureBeginY:42.722, captureEndX:70.588, captureEndY:42.722, vectorEndX:72.490, vectorEndY:42.722
2025-08-03 10:57:15.704 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:15.706 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.301727262265,EndPoint:-70.5877288831185
2025-08-03 10:57:16.002 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:16.005 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":36,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_36_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:17.631 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:17
2025-08-03 10:57:17.643 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:17
2025-08-03 10:57:20.616 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:37
2025-08-03 10:57:20.616 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:20.616 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:20.618 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:37
2025-08-03 10:57:20.618 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:37,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:20.618 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:A_SourceLightType
2025-08-03 10:57:20.618 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:37,source_light_Type:B_SourceLightType
2025-08-03 10:57:20.619 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,A_SourceLightType
2025-08-03 10:57:20.619 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：37,B_SourceLightType
2025-08-03 10:57:20.789 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;37/266,
2025-08-03 10:57:20.798 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:20.850 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:21.093 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:21.096 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_37_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:21.185 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 38
2025-08-03 10:57:21.185 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 38
2025-08-03 10:57:21.185 [Thd =75]  Info Default  开始扫描条带； [38/266]
2025-08-03 10:57:21.194 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:57:21.196 [Thd =90]  Info Default CaptureBeginX: 70.92517, CaptureBeginY:42.29393, CaptureEndX:-70.96429, CaptureEndY:42.29393, VectorBeginX:72.49006, VectorBeginY:42.29393, VectorEndX:-72.92078, VectorEndY:42.29393, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:57:21.196 [Thd =90]  Info Default ***row:38, vectorBeginX:72.490, vectorBeginY:42.294, captureBeginX:70.925, captureBeginY:42.294, captureEndX:-70.964, captureEndY:42.294, vectorEndX:-72.921, vectorEndY:42.294
2025-08-03 10:57:21.196 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:21.198 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9251695006528,EndPoint:70.9642866447306
2025-08-03 10:57:21.569 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:21.572 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":37,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_37_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:21.656 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:21
2025-08-03 10:57:21.676 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:21
2025-08-03 10:57:26.100 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:38
2025-08-03 10:57:26.101 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:26.101 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:26.103 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:38
2025-08-03 10:57:26.103 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:38,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:26.103 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:A_SourceLightType
2025-08-03 10:57:26.103 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:38,source_light_Type:B_SourceLightType
2025-08-03 10:57:26.103 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,A_SourceLightType
2025-08-03 10:57:26.103 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：38,B_SourceLightType
2025-08-03 10:57:26.280 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;38/266,
2025-08-03 10:57:26.290 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:26.346 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:26.560 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:26.562 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_38_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:26.681 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 39
2025-08-03 10:57:26.681 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 39
2025-08-03 10:57:26.681 [Thd =57]  Info Default  开始扫描条带； [39/266]
2025-08-03 10:57:26.690 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:57:26.693 [Thd =90]  Info Default ***row:39, vectorBeginX:-72.921, vectorBeginY:41.866, captureBeginX:-71.302, captureBeginY:41.866, captureEndX:70.588, captureEndY:41.866, vectorEndX:72.490, vectorEndY:41.866
2025-08-03 10:57:26.693 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:26.695 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3016919371799,EndPoint:-70.5877642082035
2025-08-03 10:57:27.034 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:27.036 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":38,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_38_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:29.199 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:29
2025-08-03 10:57:29.210 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:29
2025-08-03 10:57:31.600 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:39
2025-08-03 10:57:31.600 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:31.600 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:31.603 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:39
2025-08-03 10:57:31.603 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:39,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:31.603 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:A_SourceLightType
2025-08-03 10:57:31.603 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:39,source_light_Type:B_SourceLightType
2025-08-03 10:57:31.603 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,A_SourceLightType
2025-08-03 10:57:31.603 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：39,B_SourceLightType
2025-08-03 10:57:31.772 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;39/266,
2025-08-03 10:57:31.782 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:31.833 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:32.060 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:32.062 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_39_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:32.168 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 40
2025-08-03 10:57:32.168 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 40
2025-08-03 10:57:32.168 [Thd =66]  Info Default  开始扫描条带； [40/266]
2025-08-03 10:57:32.177 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:57:32.180 [Thd =90]  Info Default CaptureBeginX: 70.92520, CaptureBeginY:41.43730, CaptureEndX:-70.96425, CaptureEndY:41.43730, VectorBeginX:72.49009, VectorBeginY:41.43730, VectorEndX:-72.92074, VectorEndY:41.43730, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:57:32.180 [Thd =90]  Info Default ***row:40, vectorBeginX:72.490, vectorBeginY:41.437, captureBeginX:70.925, captureBeginY:41.437, captureEndX:-70.964, captureEndY:41.437, vectorEndX:-72.921, vectorEndY:41.437
2025-08-03 10:57:32.180 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:32.181 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9252048257379,EndPoint:70.9642513196456
2025-08-03 10:57:32.534 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:32.537 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":39,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_39_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:33.724 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:33
2025-08-03 10:57:33.751 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:33
2025-08-03 10:57:37.084 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:40
2025-08-03 10:57:37.084 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:37.085 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:37.087 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:40
2025-08-03 10:57:37.087 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:40,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:37.087 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:A_SourceLightType
2025-08-03 10:57:37.087 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:40,source_light_Type:B_SourceLightType
2025-08-03 10:57:37.087 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,A_SourceLightType
2025-08-03 10:57:37.088 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：40,B_SourceLightType
2025-08-03 10:57:37.259 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;40/266,
2025-08-03 10:57:37.267 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:37.322 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:37.549 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:37.552 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_40_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:37.655 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 41
2025-08-03 10:57:37.655 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 41
2025-08-03 10:57:37.655 [Thd =78]  Info Default  开始扫描条带； [41/266]
2025-08-03 10:57:37.664 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:57:37.667 [Thd =90]  Info Default ***row:41, vectorBeginX:-72.921, vectorBeginY:41.009, captureBeginX:-71.302, captureBeginY:41.009, captureEndX:70.588, captureEndY:41.009, vectorEndX:72.490, vectorEndY:41.009
2025-08-03 10:57:37.667 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:37.669 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3016566120949,EndPoint:-70.5877995332885
2025-08-03 10:57:38.028 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:38.030 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":40,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_40_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:39.774 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:39
2025-08-03 10:57:39.794 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:39
2025-08-03 10:57:42.574 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:41
2025-08-03 10:57:42.574 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:42.574 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:42.576 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:41
2025-08-03 10:57:42.576 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:41,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:42.576 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:A_SourceLightType
2025-08-03 10:57:42.576 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:41,source_light_Type:B_SourceLightType
2025-08-03 10:57:42.576 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,A_SourceLightType
2025-08-03 10:57:42.576 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：41,B_SourceLightType
2025-08-03 10:57:42.746 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;41/266,
2025-08-03 10:57:42.755 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:42.791 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:43.032 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:43.035 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_41_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:43.126 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 42
2025-08-03 10:57:43.126 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 42
2025-08-03 10:57:43.126 [Thd =50]  Info Default  开始扫描条带； [42/266]
2025-08-03 10:57:43.140 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:57:43.143 [Thd =90]  Info Default CaptureBeginX: 70.92524, CaptureBeginY:40.58068, CaptureEndX:-70.96422, CaptureEndY:40.58068, VectorBeginX:72.49013, VectorBeginY:40.58068, VectorEndX:-72.92070, VectorEndY:40.58068, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:57:43.143 [Thd =90]  Info Default ***row:42, vectorBeginX:72.490, vectorBeginY:40.581, captureBeginX:70.925, captureBeginY:40.581, captureEndX:-70.964, captureEndY:40.581, vectorEndX:-72.921, vectorEndY:40.581
2025-08-03 10:57:43.143 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:43.145 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.9252401508229,EndPoint:70.9642159945605
2025-08-03 10:57:43.507 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:43.509 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":41,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_41_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:44.311 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:44
2025-08-03 10:57:44.325 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:44
2025-08-03 10:57:48.052 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:42
2025-08-03 10:57:48.053 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:48.053 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:48.055 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:42
2025-08-03 10:57:48.055 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:42,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:48.055 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:A_SourceLightType
2025-08-03 10:57:48.055 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:42,source_light_Type:B_SourceLightType
2025-08-03 10:57:48.055 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,A_SourceLightType
2025-08-03 10:57:48.055 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：42,B_SourceLightType
2025-08-03 10:57:48.226 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;42/266,
2025-08-03 10:57:48.235 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:48.276 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:48.511 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:48.514 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_42_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:48.610 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 43
2025-08-03 10:57:48.610 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 43
2025-08-03 10:57:48.610 [Thd =65]  Info Default  开始扫描条带； [43/266]
2025-08-03 10:57:48.626 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:57:48.629 [Thd =90]  Info Default ***row:43, vectorBeginX:-72.921, vectorBeginY:40.152, captureBeginX:-71.302, captureBeginY:40.152, captureEndX:70.588, captureEndY:40.152, vectorEndX:72.490, vectorEndY:40.152
2025-08-03 10:57:48.629 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:48.631 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3016212870099,EndPoint:-70.5878348583736
2025-08-03 10:57:48.986 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:48.988 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":42,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_42_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:51.346 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:51
2025-08-03 10:57:51.367 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:51
2025-08-03 10:57:53.539 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:43
2025-08-03 10:57:53.540 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:53.540 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:53.543 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:43
2025-08-03 10:57:53.543 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:43,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:53.543 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:A_SourceLightType
2025-08-03 10:57:53.543 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:43,source_light_Type:B_SourceLightType
2025-08-03 10:57:53.543 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,A_SourceLightType
2025-08-03 10:57:53.543 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：43,B_SourceLightType
2025-08-03 10:57:53.713 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;43/266,
2025-08-03 10:57:53.723 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:53.789 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:53.997 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:54.000 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_43_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:54.126 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 44
2025-08-03 10:57:54.126 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 44
2025-08-03 10:57:54.126 [Thd =75]  Info Default  开始扫描条带； [44/266]
2025-08-03 10:57:54.135 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:57:54.138 [Thd =90]  Info Default CaptureBeginX: 70.92528, CaptureBeginY:39.72405, CaptureEndX:-70.96418, CaptureEndY:39.72405, VectorBeginX:72.49017, VectorBeginY:39.72405, VectorEndX:-72.92067, VectorEndY:39.72405, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:57:54.138 [Thd =90]  Info Default ***row:44, vectorBeginX:72.490, vectorBeginY:39.724, captureBeginX:70.925, captureBeginY:39.724, captureEndX:-70.964, captureEndY:39.724, vectorEndX:-72.921, vectorEndY:39.724
2025-08-03 10:57:54.138 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:54.139 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.925275475908,EndPoint:70.9641806694755
2025-08-03 10:57:54.483 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:54.486 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":43,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_43_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:55.380 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:57:55
2025-08-03 10:57:55.393 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:57:55
2025-08-03 10:57:59.046 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:44
2025-08-03 10:57:59.047 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:59.047 [Thd =4]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:57:59.050 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:44
2025-08-03 10:57:59.051 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:44,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:57:59.051 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:B_SourceLightType
2025-08-03 10:57:59.051 [Thd =31]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:44,source_light_Type:A_SourceLightType
2025-08-03 10:57:59.051 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,B_SourceLightType
2025-08-03 10:57:59.051 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：44,A_SourceLightType
2025-08-03 10:57:59.223 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;44/266,
2025-08-03 10:57:59.232 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:57:59.290 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:57:59.508 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:57:59.510 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_44_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:57:59.627 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 45
2025-08-03 10:57:59.627 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 45
2025-08-03 10:57:59.627 [Thd =66]  Info Default  开始扫描条带； [45/266]
2025-08-03 10:57:59.636 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:57:59.639 [Thd =90]  Info Default ***row:45, vectorBeginX:-72.921, vectorBeginY:39.296, captureBeginX:-71.302, captureBeginY:39.296, captureEndX:70.588, captureEndY:39.296, vectorEndX:72.490, vectorEndY:39.296
2025-08-03 10:57:59.639 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:57:59.640 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3015859619248,EndPoint:-70.5878701834586
2025-08-03 10:57:59.988 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:57:59.991 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":44,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_44_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:00.409 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:58:00
2025-08-03 10:58:00.423 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:58:00
2025-08-03 10:58:04.545 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:45
2025-08-03 10:58:04.545 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:04.545 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:58:04.547 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:45
2025-08-03 10:58:04.547 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:45,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:04.547 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:A_SourceLightType
2025-08-03 10:58:04.547 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:45,source_light_Type:B_SourceLightType
2025-08-03 10:58:04.547 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,A_SourceLightType
2025-08-03 10:58:04.548 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：45,B_SourceLightType
2025-08-03 10:58:04.725 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;45/266,
2025-08-03 10:58:04.734 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:58:04.788 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:58:05.002 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:58:05.021 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_45_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:05.127 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 46
2025-08-03 10:58:05.127 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 46
2025-08-03 10:58:05.127 [Thd =74]  Info Default  开始扫描条带； [46/266]
2025-08-03 10:58:05.136 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:58:05.139 [Thd =90]  Info Default CaptureBeginX: 70.92531, CaptureBeginY:38.86743, CaptureEndX:-70.96415, CaptureEndY:38.86743, VectorBeginX:72.49020, VectorBeginY:38.86743, VectorEndX:-72.92063, VectorEndY:38.86743, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:58:05.139 [Thd =90]  Info Default ***row:46, vectorBeginX:72.490, vectorBeginY:38.867, captureBeginX:70.925, captureBeginY:38.867, captureEndX:-70.964, captureEndY:38.867, vectorEndX:-72.921, vectorEndY:38.867
2025-08-03 10:58:05.139 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:58:05.141 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.925310800993,EndPoint:70.9641453443904
2025-08-03 10:58:05.494 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:58:05.496 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":45,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_45_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:06.029 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:58:06
2025-08-03 10:58:06.041 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:58:06
2025-08-03 10:58:10.044 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:46
2025-08-03 10:58:10.045 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:10.045 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:58:10.047 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:46
2025-08-03 10:58:10.047 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:46,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:10.047 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:A_SourceLightType
2025-08-03 10:58:10.047 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:46,source_light_Type:B_SourceLightType
2025-08-03 10:58:10.047 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,A_SourceLightType
2025-08-03 10:58:10.047 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：46,B_SourceLightType
2025-08-03 10:58:10.225 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;46/266,
2025-08-03 10:58:10.234 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:58:10.277 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:58:10.513 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:58:10.515 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_46_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:10.628 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 47
2025-08-03 10:58:10.628 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 47
2025-08-03 10:58:10.628 [Thd =57]  Info Default  开始扫描条带； [47/266]
2025-08-03 10:58:10.637 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:58:10.640 [Thd =90]  Info Default ***row:47, vectorBeginX:-72.921, vectorBeginY:38.439, captureBeginX:-71.302, captureBeginY:38.439, captureEndX:70.588, captureEndY:38.439, vectorEndX:72.490, vectorEndY:38.439
2025-08-03 10:58:10.640 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:58:10.642 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3015506368398,EndPoint:-70.5879055085436
2025-08-03 10:58:10.982 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:58:10.984 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":46,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_46_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:13.565 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:58:13
2025-08-03 10:58:13.592 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:58:13
2025-08-03 10:58:15.546 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:47
2025-08-03 10:58:15.546 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:15.547 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:58:15.548 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:47
2025-08-03 10:58:15.549 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:47,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:15.549 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:A_SourceLightType
2025-08-03 10:58:15.549 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:47,source_light_Type:B_SourceLightType
2025-08-03 10:58:15.549 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,A_SourceLightType
2025-08-03 10:58:15.549 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：47,B_SourceLightType
2025-08-03 10:58:15.721 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;47/266,
2025-08-03 10:58:15.730 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:58:15.778 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:58:16.004 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:58:16.006 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_47_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:16.115 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 48
2025-08-03 10:58:16.115 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 48
2025-08-03 10:58:16.115 [Thd =95]  Info Default  开始扫描条带； [48/266]
2025-08-03 10:58:16.124 [Thd =90]  Info Default ScanDirection is Positive
2025-08-03 10:58:16.127 [Thd =90]  Info Default CaptureBeginX: 70.92535, CaptureBeginY:38.01081, CaptureEndX:-70.96411, CaptureEndY:38.01081, VectorBeginX:72.49024, VectorBeginY:38.01081, VectorEndX:-72.92060, VectorEndY:38.01081, PrepareDistanceScan:2.00000, PrepareDistanceStep:0.00000, StepScan:0.435, CosValueY:1.00000, SinValueY:0.00000
2025-08-03 10:58:16.127 [Thd =90]  Info Default ***row:48, vectorBeginX:72.490, vectorBeginY:38.011, captureBeginX:70.925, captureBeginY:38.011, captureEndX:-70.964, captureEndY:38.011, vectorEndX:-72.921, vectorEndY:38.011
2025-08-03 10:58:16.127 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:58:16.128 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:0.000212456182178743,BeginPoint:-70.925346126078,EndPoint:70.9641100193054
2025-08-03 10:58:16.478 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:58:16.481 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":47,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_47_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:16.602 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:58:16
2025-08-03 10:58:16.613 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:58:16
2025-08-03 10:58:21.032 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:48
2025-08-03 10:58:21.032 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:21.032 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:58:21.034 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:48
2025-08-03 10:58:21.034 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:48,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:21.034 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:A_SourceLightType
2025-08-03 10:58:21.034 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:48,source_light_Type:B_SourceLightType
2025-08-03 10:58:21.034 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,A_SourceLightType
2025-08-03 10:58:21.034 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：48,B_SourceLightType
2025-08-03 10:58:21.207 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;48/266,
2025-08-03 10:58:21.216 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:58:21.310 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:58:21.498 [Thd =63]  Info Default --source_light_Type:0,count:1
2025-08-03 10:58:21.500 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":0,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_48_A_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:21.645 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() OnReportProgress : 49
2025-08-03 10:58:21.645 [Thd =90]  Error Default AutoWorkerHelpe:SnakeScanLine() For Begin : 49
2025-08-03 10:58:21.645 [Thd =95]  Info Default  开始扫描条带； [49/266]
2025-08-03 10:58:21.658 [Thd =90]  Info Default ScanDirection is Negative
2025-08-03 10:58:21.660 [Thd =90]  Info Default ***row:49, vectorBeginX:-72.921, vectorBeginY:37.582, captureBeginX:-71.302, captureBeginY:37.582, captureEndX:70.588, captureEndY:37.582, vectorEndX:72.490, vectorEndY:37.582
2025-08-03 10:58:21.660 [Thd =90]  Info Default m_focusMapMode：0
2025-08-03 10:58:21.663 [Thd =90]  Info Default Axis X:3,PulseWidth:0.002,TriggerDistance:-0.000212456182178743,BeginPoint:71.3015153117548,EndPoint:-70.5879408336287
2025-08-03 10:58:21.961 [Thd =63]  Info Default --source_light_Type:1,count:1
2025-08-03 10:58:21.969 [Thd =63]  Info Default Sending data to the MCU,stripInfo:{"strip_no":48,"substrip_no":0,"source_light_type":1,"width":2032,"height":2048,"count":325,"count_pack":1341,"die_width":0,"die_height":0,"die_count":0,"die_begin_pos":0,"die_cycle_width":0,"die_cycle_height":0,"die_inter_X_len":0,"isRotate":1,"stripCount4Die":0,"subStripNo4Die":0,"die_col":0,"die_row_item":[],"paths":["2025-08-03\\rcp_DB_1\\StripData\\strip_48_B_data.dat"],"info_total":2,"optical_head_id":0,"die_begin_pos_X":0}
2025-08-03 10:58:23.196 [Thd =88]  Info Default RecordCompleteStripNo begin:2025-08-03 10:58:23
2025-08-03 10:58:23.217 [Thd =88]  Info Default RecordCompleteStripNo end:2025-08-03 10:58:23
2025-08-03 10:58:26.567 [Thd =31]  Info Default Stripes are collected for data processing！strip_no:49
2025-08-03 10:58:26.568 [Thd =31]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:A_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:26.568 [Thd =31]  Info Default Singleton.addTask ,taskQueue:1
2025-08-03 10:58:26.570 [Thd =4]  Info Default Stripes are collected for data processing！strip_no:49
2025-08-03 10:58:26.570 [Thd =4]  Info Default Singleton.addTask ,m_strip_idx:49,source_light_Type:B_SourceLightType,lockTaskObj:30368889
2025-08-03 10:58:26.570 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:A_SourceLightType
2025-08-03 10:58:26.570 [Thd =4]  Info Default Singleton.addTask Add to m_RevImg_pool,m_strip_idx:49,source_light_Type:B_SourceLightType
2025-08-03 10:58:26.570 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,A_SourceLightType
2025-08-03 10:58:26.570 [Thd =60]  Info Default The data goes to the m_CollectImg_pool thread pool,strip_idx：49,B_SourceLightType
2025-08-03 10:58:26.743 [Thd =90]  Info Default Strip scanning complete, waiting for collection... ;49/266,
2025-08-03 10:58:26.752 [Thd =90]  Info Default AutoWorkerHelpe:SnakeScanLine() Strip scanning collection Finish ! 
2025-08-03 10:58:26.802 [Thd =90]  Info Default singleAixsScan Testing 2
2025-08-03 10:58:27.024 [Thd =63]  Info Default --source_light_Type:0,count:1